Adding scripts, commands, and logging scaffolding
This commit is contained in:
Carlos Gutierrez
@@ -46,320 +46,3 @@ smpboot: Allowing 4 CPUs, 0 hotplug CPUs
|
||||
[mem 0x80000000-0xfffeffff] available for PCI devices
|
||||
Booting paravirtualized kernel on bare hardware
|
||||
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
|
||||
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
|
||||
percpu: Embedded 49 pages/cpu s160856 r8192 d31656 u524288
|
||||
Built 1 zonelists, mobility grouping on. Total pages: 517001
|
||||
Kernel command line: earlyprintk=ttyS0 console=ttyS0 lpj=7999923 root=/dev/hda1
|
||||
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
|
||||
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
|
||||
mem auto-init: stack:off, heap alloc:off, heap free:off
|
||||
Memory: 2043600K/2096760K available (8195K kernel code, 1281K rwdata, 2088K rodata, 1192K init, 1888K bss, 53160K reserved, 0K cma-reserved)
|
||||
rcu: Hierarchical RCU implementation.
|
||||
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
|
||||
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
|
||||
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
|
||||
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
|
||||
random: get_random_bytes called from start_kernel+0x304/0x4e6 with crng_init=0
|
||||
Console: colour dummy device 80x25
|
||||
printk: console [ttyS0] enabled
|
||||
printk: console [ttyS0] enabled
|
||||
printk: bootconsole [earlyser0] disabled
|
||||
printk: bootconsole [earlyser0] disabled
|
||||
APIC: Switch to symmetric I/O mode setup
|
||||
ExtINT not setup in hardware but reported by MP table
|
||||
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
|
||||
tsc: Marking TSC unstable due to TSCs unsynchronized
|
||||
Calibrating delay loop (skipped) preset value.. 15999.84 BogoMIPS (lpj=7999923)
|
||||
pid_max: default: 32768 minimum: 301
|
||||
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
|
||||
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
|
||||
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
|
||||
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
|
||||
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
|
||||
Spectre V2 : Mitigation: Full AMD retpoline
|
||||
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
|
||||
Speculative Store Bypass: Vulnerable
|
||||
Freeing SMP alternatives memory: 12K
|
||||
smpboot: CPU0: Hygon Fake M5 x86_64 CPU (family: 0xf, model: 0x25, stepping: 0x1)
|
||||
Performance Events: HYGON PMU driver.
|
||||
... version: 0
|
||||
... bit width: 48
|
||||
... generic registers: 4
|
||||
... value mask: 0000ffffffffffff
|
||||
... max period: 00007fffffffffff
|
||||
... fixed-purpose events: 0
|
||||
... event mask: 000000000000000f
|
||||
rcu: Hierarchical SRCU implementation.
|
||||
smp: Bringing up secondary CPUs ...
|
||||
x86: Booting SMP configuration:
|
||||
.... node #0, CPUs: #1 #2 #3
|
||||
smp: Brought up 1 node, 4 CPUs
|
||||
smpboot: Max logical packages: 4
|
||||
smpboot: Total of 4 processors activated (63999.38 BogoMIPS)
|
||||
devtmpfs: initialized
|
||||
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
|
||||
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
|
||||
NET: Registered protocol family 16
|
||||
audit: initializing netlink subsys (disabled)
|
||||
audit: type=2000 audit(1325376000.303:1): state=initialized audit_enabled=0 res=1
|
||||
cpuidle: using governor ladder
|
||||
PCI: Using configuration type 1 for base access
|
||||
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
|
||||
ACPI: Interpreter disabled.
|
||||
vgaarb: loaded
|
||||
SCSI subsystem initialized
|
||||
usbcore: registered new interface driver usbfs
|
||||
usbcore: registered new interface driver hub
|
||||
usbcore: registered new device driver usb
|
||||
pps_core: LinuxPPS API ver. 1 registered
|
||||
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
||||
PTP clock support registered
|
||||
PCI: Probing PCI hardware
|
||||
PCI host bridge to bus 0000:00
|
||||
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
|
||||
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffffff]
|
||||
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
|
||||
pci 0000:00:04.0: [8086:7111] type 00 class 0x010180
|
||||
pci 0000:00:04.0: reg 0x20: [io 0x0000-0x000f]
|
||||
pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
|
||||
pci 0000:00:04.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
|
||||
pci 0000:00:04.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
|
||||
pci 0000:00:04.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
|
||||
pci 0000:00:04.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
|
||||
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
|
||||
clocksource: Switched to clocksource refined-jiffies
|
||||
VFS: Disk quotas dquot_6.6.0
|
||||
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
|
||||
pnp: PnP ACPI: disabled
|
||||
thermal_sys: Registered thermal governor 'step_wise'
|
||||
thermal_sys: Registered thermal governor 'user_space'
|
||||
pci 0000:00:04.0: BAR 6: assigned [mem 0x80000000-0x800007ff pref]
|
||||
pci 0000:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
|
||||
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
|
||||
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffffff]
|
||||
NET: Registered protocol family 2
|
||||
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
|
||||
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
|
||||
TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
|
||||
TCP: Hash tables configured (established 16384 bind 16384)
|
||||
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
|
||||
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
|
||||
NET: Registered protocol family 1
|
||||
PCI: CLS 0 bytes, default 64
|
||||
platform rtc_cmos: registered platform RTC device (no PNP device found)
|
||||
workingset: timestamp_bits=62 max_order=19 bucket_order=0
|
||||
fuse: init (API version 7.31)
|
||||
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
|
||||
io scheduler mq-deadline registered
|
||||
io scheduler kyber registered
|
||||
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
|
||||
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
||||
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 8250
|
||||
Linux agpgart interface v0.103
|
||||
brd: module loaded
|
||||
loop: module loaded
|
||||
Uniform Multi-Platform E-IDE driver
|
||||
piix 0000:00:04.0: IDE controller (0x8086:0x7111 rev 0x00)
|
||||
pci 0000:00:04.0: enabling device (0000 -> 0001)
|
||||
pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 16
|
||||
piix 0000:00:04.0: not 100% native mode: will probe irqs later
|
||||
legacy IDE will be removed in 2021, please switch to libata
|
||||
Report any missing HW support to linux-ide@vger.kernel.org
|
||||
ide0: BM-DMA at 0x1000-0x1007
|
||||
ide1: BM-DMA at 0x1008-0x100f
|
||||
hda: M5 IDE Disk, ATA DISK drive
|
||||
hda: UDMA/33 mode selected
|
||||
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
|
||||
ide1 at 0x170-0x177,0x376 on irq 15
|
||||
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
|
||||
ide-gd driver 1.18
|
||||
hda: max request size: 128KiB
|
||||
hda: 4194304 sectors (2147 MB), CHS=4161/16/63
|
||||
hda: hda1
|
||||
ide-cd driver 5.00
|
||||
Loading iSCSI transport class v2.0-870.
|
||||
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
|
||||
e1000: Copyright (c) 1999-2006 Intel Corporation.
|
||||
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
|
||||
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
|
||||
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
|
||||
igb: Copyright (c) 2007-2014 Intel Corporation.
|
||||
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
|
||||
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
|
||||
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
|
||||
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
|
||||
ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k
|
||||
ixgbevf: Copyright (c) 2009 - 2018 Intel Corporation.
|
||||
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
|
||||
ixgb: Copyright (c) 1999-2008 Intel Corporation.
|
||||
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
||||
ehci-pci: EHCI PCI platform driver
|
||||
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
|
||||
ohci-pci: OHCI PCI platform driver
|
||||
uhci_hcd: USB Universal Host Controller Interface driver
|
||||
i8042: PNP: No PS/2 controller found.
|
||||
i8042: Probing ports directly.
|
||||
serio: i8042 KBD port at 0x60,0x64 irq 1
|
||||
serio: i8042 AUX port at 0x60,0x64 irq 12
|
||||
mousedev: PS/2 mouse device common for all mice
|
||||
usbcore: registered new interface driver usbhid
|
||||
usbhid: USB HID core driver
|
||||
NET: Registered protocol family 17
|
||||
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
|
||||
IPI shorthand broadcast: enabled
|
||||
Unstable clock detected, switching default tracing clock to "global"
|
||||
If you want to keep using the local clock, then add:
|
||||
"trace_clock=local"
|
||||
on the kernel command line
|
||||
EXT4-fs (hda1): mounted filesystem with ordered data mode. Opts: (null)
|
||||
VFS: Mounted root (ext4 filesystem) on device 3:1.
|
||||
devtmpfs: mounted
|
||||
Freeing unused kernel image memory: 1192K
|
||||
Write protecting the kernel read-only data: 14336k
|
||||
Freeing unused kernel image memory: 2028K
|
||||
Freeing unused kernel image memory: 2008K
|
||||
rodata_test: all tests were successful
|
||||
Run /sbin/init as init process
|
||||
random: fast init done
|
||||
systemd[1]: System time before build time, advancing clock.
|
||||
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
|
||||
systemd[1]: Detected architecture x86-64.
|
||||
|
||||
Welcome to [1mUbuntu 18.04.2 LTS[0m!
|
||||
|
||||
systemd[1]: Set hostname to <gem5-host>.
|
||||
systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
|
||||
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
|
||||
random: systemd: uninitialized urandom read (16 bytes read)
|
||||
systemd[1]: Created slice System Slice.
|
||||
[[0;32m OK [0m] Created slice System Slice.
|
||||
random: systemd: uninitialized urandom read (16 bytes read)
|
||||
systemd[1]: Listening on fsck to fsckd communication Socket.
|
||||
[[0;32m OK [0m] Listening on fsck to fsckd communication Socket.
|
||||
random: systemd: uninitialized urandom read (16 bytes read)
|
||||
systemd[1]: Created slice User and Session Slice.
|
||||
[[0;32m OK [0m] Created slice User and Session Slice.
|
||||
systemd[1]: Created slice system-serial\x2dgetty.slice.
|
||||
[[0;32m OK [0m] Created slice system-serial\x2dgetty.slice.
|
||||
systemd[1]: Reached target Remote File Systems.
|
||||
[[0;32m OK [0m] Reached target Remote File Systems.
|
||||
[[0;32m OK [0m] Listening on Syslog Socket.
|
||||
[[0;32m OK [0m] Reached target User and Group Name Lookups.
|
||||
[[0;32m OK [0m] Listening on Journal Socket (/dev/log).
|
||||
[[0;32m OK [0m] Started Forward Password Requests to Wall Directory Watch.
|
||||
[[0;32m OK [0m] Listening on udev Control Socket.
|
||||
[[0;32m OK [0m] Listening on /dev/initctl Compatibility Named Pipe.
|
||||
[[0;32m OK [0m] Listening on Journal Socket.
|
||||
Mounting POSIX Message Queue File System...
|
||||
Starting Set the console keyboard layout...
|
||||
Starting Remount Root and Kernel File Systems...
|
||||
Starting Load Kernel Modules...
|
||||
[[0;32m OK [0m] Listening on udev Kernel Socket.
|
||||
Starting udev Coldplug all Devices...
|
||||
Mounting Huge Pages File System...
|
||||
[[0;32m OK [0m] Listening on Journal Audit Socket.
|
||||
Starting Journal Service...
|
||||
[[0;32m OK [0m] Reached target Slices.
|
||||
Starting Uncomplicated firewall...
|
||||
Mounting Kernel Debug File System...
|
||||
Starting Create Static Device Nodes in /dev...
|
||||
[[0;32m OK [0m] Started Read required files in advance.
|
||||
[[0;32m OK [0m] Started Set the console keyboard layout.
|
||||
[[0;32m OK [0m] Started Load Kernel Modules.
|
||||
[[0;32m OK [0m] Mounted POSIX Message Queue File System.
|
||||
Mounting Kernel Configuration File System...
|
||||
Starting Apply Kernel Variables...
|
||||
Mounting FUSE Control File System...
|
||||
[[0;32m OK [0m] Mounted Huge Pages File System.
|
||||
[[0;32m OK [0m] Started Uncomplicated firewall.
|
||||
[[0;32m OK [0m] Mounted Kernel Debug File System.
|
||||
[[0;32m OK [0m] Mounted FUSE Control File System.
|
||||
[[0;32m OK [0m] Mounted Kernel Configuration File System.
|
||||
[[0;32m OK [0m] Started Apply Kernel Variables.
|
||||
[[0;32m OK [0m] Started Journal Service.
|
||||
[[0;32m OK [0m] Started Remount Root and Kernel File Systems.
|
||||
Starting Flush Journal to Persistent Storage...
|
||||
Activating swap /swapfile...
|
||||
Starting Load/Save Random Seed...
|
||||
[[0;32m OK [0m] Started Create Static Device Nodes in /dev.
|
||||
Starting udev Kernel Device Manager...
|
||||
[[0;32m OK [0m] Reached target Local File Systems (Pre).
|
||||
[[0;32m OK [0m] Reached target Local File Systems.
|
||||
Starting Set console font and keymap...
|
||||
Starting Tell Plymouth To Write Out Runtime Data...
|
||||
[[0;32m OK [0m] Started Load/Save Random Seed.
|
||||
[[0;32m OK [0m] Activated swap /swapfile.
|
||||
[[0;32m OK [0m] Reached target Swap.
|
||||
[[0;32m OK [0m] Started Set console font and keymap.
|
||||
[[0;32m OK [0m] Started Tell Plymouth To Write Out Runtime Data.
|
||||
[[0;32m OK [0m] Started udev Coldplug all Devices.
|
||||
[[0;32m OK [0m] Started udev Kernel Device Manager.
|
||||
Starting Network Service...
|
||||
[[0;32m OK [0m] Started Dispatch Password Requests to Console Directory Watch.
|
||||
[[0;32m OK [0m] Reached target Local Encrypted Volumes.
|
||||
[[0;32m OK [0m] Reached target Paths.
|
||||
[[0;32m OK [0m] Started Flush Journal to Persistent Storage.
|
||||
Starting Create Volatile Files and Directories...
|
||||
[[0;32m OK [0m] Started Create Volatile Files and Directories.
|
||||
Starting Network Time Synchronization...
|
||||
Starting Update UTMP about System Boot/Shutdown...
|
||||
[[0;32m OK [0m] Started Network Service.
|
||||
Starting Network Name Resolution...
|
||||
[[0;32m OK [0m] Found device /dev/ttyS0.
|
||||
[[0;32m OK [0m] Started Update UTMP about System Boot/Shutdown.
|
||||
[[0;32m OK [0m] Started Network Name Resolution.
|
||||
[[0;32m OK [0m] Reached target Host and Network Name Lookups.
|
||||
[[0;32m OK [0m] Reached target Network.
|
||||
[[0;32m OK [0m] Started Network Time Synchronization.
|
||||
[[0;32m OK [0m] Reached target System Initialization.
|
||||
[[0;32m OK [0m] Listening on D-Bus System Message Bus Socket.
|
||||
[[0;32m OK [0m] Started Message of the Day.
|
||||
[[0;32m OK [0m] Started Daily Cleanup of Temporary Directories.
|
||||
[[0;32m OK [0m] Listening on UUID daemon activation socket.
|
||||
[[0;32m OK [0m] Reached target Sockets.
|
||||
[[0;32m OK [0m] Reached target Basic System.
|
||||
Starting LSB: Record successful boot for GRUB...
|
||||
Starting Dispatcher daemon for systemd-networkd...
|
||||
[[0;32m OK [0m] Started Regular background program processing daemon.
|
||||
Starting Accounts Service...
|
||||
Starting Login Service...
|
||||
[[0;32m OK [0m] Started D-Bus System Message Bus.
|
||||
[[0;32m OK [0m] Started Set the CPU Frequency Scaling governor.
|
||||
Starting Permit User Sessions...
|
||||
[[0;32m OK [0m] Started irqbalance daemon.
|
||||
Starting OpenBSD Secure Shell server...
|
||||
Starting System Logging Service...
|
||||
[[0;32m OK [0m] Reached target System Time Synchronized.
|
||||
[[0;32m OK [0m] Started Daily apt download activities.
|
||||
[[0;32m OK [0m] Started Daily apt upgrade and clean activities.
|
||||
[[0;32m OK [0m] Started Discard unused blocks once a week.
|
||||
[[0;32m OK [0m] Reached target Timers.
|
||||
[[0;1;31mFAILED[0m] Failed to start Accounts Service.
|
||||
See 'systemctl status accounts-daemon.service' for details.
|
||||
[[0;32m OK [0m] Started Permit User Sessions.
|
||||
[[0;32m OK [0m] Started Login Service.
|
||||
Starting Hold until boot process finishes up...
|
||||
Starting Terminate Plymouth Boot Screen...
|
||||
[[0;32m OK [0m] Started Hold until boot process finishes up.
|
||||
[[0;32m OK [0m] Started Serial Getty on ttyS0.
|
||||
Starting Set console scheme...
|
||||
[[0;32m OK [0m] Started Terminate Plymouth Boot Screen.
|
||||
[[0;32m OK [0m] Started System Logging Service.
|
||||
[[0;32m OK [0m] Started Set console scheme.
|
||||
[[0;32m OK [0m] Created slice system-getty.slice.
|
||||
[[0;32m OK [0m] Started Getty on tty1.
|
||||
[[0;32m OK [0m] Reached target Login Prompts.
|
||||
[[0;32m OK [0m] Started LSB: Record successful boot for GRUB.
|
||||
[[0;32m OK [0m] Started OpenBSD Secure Shell server.
|
||||
[[0;1;31mFAILED[0m] Failed to start Dispatcher daemon for systemd-networkd.
|
||||
See 'systemctl status networkd-dispatcher.service' for details.
|
||||
[[0;32m OK [0m] Reached target Multi-User System.
|
||||
[[0;32m OK [0m] Reached target Graphical Interface.
|
||||
[[0;32m OK [0m] Started Stop ureadahead data collection 45s after completed startup.
|
||||
Starting Update UTMP about System Runlevel Changes...
|
||||
[[0;32m OK [0m] Started Update UTMP about System Runlevel Changes.
|
||||
|
||||
|
||||
Ubuntu 18.04.2 LTS gem5-host ttyS0
|
||||
|
||||
gem5-host login: root (automatic login)
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Reference in New Issue
Block a user