Adding scripts, commands, and logging scaffolding

m5out/board.pc.com_1.device

@@ -46,3 +46,185 @@ smpboot: Allowing 4 CPUs, 0 hotplug CPUs
 [mem 0x80000000-0xfffeffff] available for PCI devices
 Booting paravirtualized kernel on bare hardware
 clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
+setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
+percpu: Embedded 49 pages/cpu s160856 r8192 d31656 u524288
+Built 1 zonelists, mobility grouping on.  Total pages: 517001
+Kernel command line: earlyprintk=ttyS0 console=ttyS0 lpj=7999923 root=/dev/hda1
+Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
+Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
+mem auto-init: stack:off, heap alloc:off, heap free:off
+Memory: 2043600K/2096760K available (8195K kernel code, 1281K rwdata, 2088K rodata, 1192K init, 1888K bss, 53160K reserved, 0K cma-reserved)
+rcu: Hierarchical RCU implementation.
+rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
+rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
+rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
+random: get_random_bytes called from start_kernel+0x304/0x4e6 with crng_init=0
+Console: colour dummy device 80x25
+printk: console [ttyS0] enabled
+printk: console [ttyS0] enabled
+printk: bootconsole [earlyser0] disabled
+printk: bootconsole [earlyser0] disabled
+APIC: Switch to symmetric I/O mode setup
+ExtINT not setup in hardware but reported by MP table
+..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
+tsc: Marking TSC unstable due to TSCs unsynchronized
+Calibrating delay loop (skipped) preset value.. 15999.84 BogoMIPS (lpj=7999923)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
+Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
+Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
+Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
+Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
+Spectre V2 : Mitigation: Full AMD retpoline
+Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
+Speculative Store Bypass: Vulnerable
+Freeing SMP alternatives memory: 12K
+smpboot: CPU0: Hygon Fake M5 x86_64 CPU (family: 0xf, model: 0x25, stepping: 0x1)
+Performance Events: HYGON PMU driver.
+... version:                0
+... bit width:              48
+... generic registers:      4
+... value mask:             0000ffffffffffff
+... max period:             00007fffffffffff
+... fixed-purpose events:   0
+... event mask:             000000000000000f
+rcu: Hierarchical SRCU implementation.
+smp: Bringing up secondary CPUs ...
+x86: Booting SMP configuration:
+.... node  #0, CPUs:      #1 #2 #3
+smp: Brought up 1 node, 4 CPUs
+smpboot: Max logical packages: 4
+smpboot: Total of 4 processors activated (63999.38 BogoMIPS)
+devtmpfs: initialized
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
+futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
+NET: Registered protocol family 16
+audit: initializing netlink subsys (disabled)
+audit: type=2000 audit(1325376000.303:1): state=initialized audit_enabled=0 res=1
+cpuidle: using governor ladder
+PCI: Using configuration type 1 for base access
+HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
+vgaarb: loaded
+SCSI subsystem initialized
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+PCI: Probing PCI hardware
+PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
+pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffffff]
+pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
+pci 0000:00:04.0: [8086:7111] type 00 class 0x010180
+pci 0000:00:04.0: reg 0x20: [io  0x0000-0x000f]
+pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
+pci 0000:00:04.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
+pci 0000:00:04.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
+pci 0000:00:04.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
+pci 0000:00:04.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
+pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
+clocksource: Switched to clocksource refined-jiffies
+VFS: Disk quotas dquot_6.6.0
+VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
+thermal_sys: Registered thermal governor 'step_wise'
+thermal_sys: Registered thermal governor 'user_space'
+pci 0000:00:04.0: BAR 6: assigned [mem 0x80000000-0x800007ff pref]
+pci 0000:00:04.0: BAR 4: assigned [io  0x1000-0x100f]
+pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
+pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffffff]
+NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
+TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
+TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
+TCP: Hash tables configured (established 16384 bind 16384)
+UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
+UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
+NET: Registered protocol family 1
+PCI: CLS 0 bytes, default 64
+platform rtc_cmos: registered platform RTC device (no PNP device found)
+workingset: timestamp_bits=62 max_order=19 bucket_order=0
+fuse: init (API version 7.31)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
+io scheduler mq-deadline registered
+io scheduler kyber registered
+acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 8250
+Linux agpgart interface v0.103
+brd: module loaded
+loop: module loaded
+Uniform Multi-Platform E-IDE driver
+piix 0000:00:04.0: IDE controller (0x8086:0x7111 rev 0x00)
+pci 0000:00:04.0: enabling device (0000 -> 0001)
+pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 16
+piix 0000:00:04.0: not 100% native mode: will probe irqs later
+legacy IDE will be removed in 2021, please switch to libata
+Report any missing HW support to linux-ide@vger.kernel.org
+    ide0: BM-DMA at 0x1000-0x1007
+    ide1: BM-DMA at 0x1008-0x100f
+hda: M5 IDE Disk, ATA DISK drive
+hda: UDMA/33 mode selected
+ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
+ide1 at 0x170-0x177,0x376 on irq 15
+ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
+ide-gd driver 1.18
+hda: max request size: 128KiB
+hda: 4194304 sectors (2147 MB), CHS=4161/16/63
+ hda: hda1
+ide-cd driver 5.00
+Loading iSCSI transport class v2.0-870.
+e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
+e1000: Copyright (c) 1999-2006 Intel Corporation.
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
+ixgbe: Copyright (c) 1999-2016 Intel Corporation.
+ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k
+ixgbevf: Copyright (c) 2009 - 2018 Intel Corporation.
+ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
+ixgb: Copyright (c) 1999-2008 Intel Corporation.
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+uhci_hcd: USB Universal Host Controller Interface driver
+i8042: PNP: No PS/2 controller found.
+i8042: Probing ports directly.
+serio: i8042 KBD port at 0x60,0x64 irq 1
+serio: i8042 AUX port at 0x60,0x64 irq 12
+mousedev: PS/2 mouse device common for all mice
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
+IPI shorthand broadcast: enabled
+Unstable clock detected, switching default tracing clock to "global"
+If you want to keep using the local clock, then add:
+  "trace_clock=local"
+on the kernel command line
+EXT4-fs (hda1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 3:1.
+devtmpfs: mounted
+Freeing unused kernel image memory: 1192K
+Write protecting the kernel read-only data: 14336k
+Freeing unused kernel image memory: 2028K
+Freeing unused kernel image memory: 2008K
+rodata_test: all tests were successful
+Run /sbin/init as init process
+random: fast init done
+systemd[1]: System time before build time, advancing clock.
+systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
+systemd[1]: Detected architecture x86-64.
+
+Welcome to Ubuntu 18.04.2 LTS!
+
+systemd[1]: Set hostname to <gem5-host>.