The `ng_module` rule supports the generation of flat module bundles. In
View Engine, information about this flat module bundle is exposed
as a Bazel provider. This is helpful as other rules like `ng_package`
could rely on this information to determine entry-points for the APF.
With Ivy this currently does not work because the flat module
information is not exposed in the provider. The reason for this is
unclear. We should also provide this information in Ivy so that rules
like `ng_package` can also determine the correct entry-points when a
package is built specifically with `--config=ivy`.
PR Close#36971
Currently when the `plural` or `select` keywords in an ICU contain trailing spaces (e.g. `{count, select , ...}`), these spaces are also included into the key names in ICU vars (e.g. "VAR_SELECT "). These trailing spaces are not desirable, since they will later be converted into `_` symbols while normalizing placeholder names, thus causing mismatches at runtime (i.e. placeholder will not be replaced with the correct value). This commit updates the code to trim these spaces while generating an object with placeholders, to make sure the runtime logic can replace these placeholders with the right values.
PR Close#37866
Incremental compilation allows for the output state of one compilation to be
reused as input to the next compilation. This involves retaining references
to instances from prior compilations, which must be done carefully to avoid
memory leaks.
This commit fixes such a leak with a complicated retention chain:
* `TrackedIncrementalBuildStrategy` unnecessarily hangs on to the previous
`IncrementalDriver` (state of the previous compilation) once the current
compilation completes.
In general this is unnecessary, but should be safe as long as the chain
only goes back one level - if the `IncrementalDriver` doesn't retain any
previous `TrackedIncrementalBuildStrategy` instances. However, this does
happen:
* `NgCompiler` indirectly causes retention of previous `NgCompiler`
instances (and thus previous `TrackedIncrementalBuildStrategy` instances)
through accidental capture of the `this` context in a closure created in
its constructor. This closure is wrapped in a `ts.ModuleResolutionCache`
used to create a `ModuleResolver` class, which is passed to the program's
`TraitCompiler` on construction.
* The `IncrementalDriver` retains a reference to the `TraitCompiler` of the
previous compilation, completing the reference chain.
The final retention chain thus looks like:
* `TrackedIncrementalBuildStrategy` of current program
* `.previous`: `IncrementalDriver` of previous program
* `.lastGood.traitCompiler`: `TraitCompiler`
* `.handlers[..].moduleResolver.moduleResolutionCache`: cache
* (via `getCanonicalFileName` closure): `NgCompiler`
* `.incrementalStrategy`: `TrackedIncrementalBuildStrategy` of previous
program.
The closure link is the "real" leak here. `NgCompiler` is creating a closure
for `getCanonicalFileName`, delegating to its
`this.adapter.getCanonicalFileName`, for the purposes of creating a
`ts.ModuleResolutionCache`. The fact that the closure references
`NgCompiler` thus eventually causes previous `NgCompiler` iterations to be
retained. This is also potentially problematic due to the shared nature of
`ts.ModuleResolutionCache`, which is potentially retained across multiple
compilations intentionally.
This commit fixes the first two links in the retention chain: the build
strategy is patched to not retain a `previous` pointer, and the `NgCompiler`
is patched to not create a closure in the first place, but instead pass a
bound function. This ensures that the `NgCompiler` does not retain previous
instances of itself in the first place, even if the build strategy does
end up retaining the previous incremental state unnecessarily.
The third link (`IncrementalDriver` unnecessarily retaining the whole
`TraitCompiler`) is not addressed in this commit as it's a more
architectural problem that will require some refactoring. However, the leak
potential of this retention is eliminated thanks to fixing the first two
issues.
PR Close#37835
When ngcc creates an entry-point program, the `allowJs` option is enabled
in order to operate on the JavaScript source files of the entry-point.
A side-effect of this approach is that external modules that don't ship
declaration files will also have their JavaScript source files loaded
into the program, as the `allowJs` flag allows for them to be imported.
This may pose an issue in certain edge cases, where ngcc would inadvertently
operate on these external modules. This can introduce all sorts of undesirable
behavior and incompatibilities, e.g. the reflection host that is selected for
the entry-point's format could be incompatible with that of the external
module's JavaScript bundles.
To avoid these kinds of issues, module resolution that would resolve to
a JavaScript file located outside of the package will instead be rejected,
as if the file would not exist. This would have been the behavior when
`allowJs` is set to false, which is the case in typical Angular compilations.
Fixes#37508
PR Close#37596
Changes `isWithinPackage` to take an `AbsoluteFsPath` instead of `ts.SourceFile`,
to allow for an upcoming change to use it when no `ts.SourceFile` is available,
but just a path.
PR Close#37596
Previously an error thrown in the `analyzeFn` would cause
the ngcc process to exit immediately without removing the
lockfile, and potentially before the unlocker process had been
successfully spawned resulting in the lockfile being orphaned
and left behind.
Now we catch these errors and remove the lockfile as needed.
PR Close#37739
Commit 4213e8d5 introduced shim reference tagging into the compiler, and
changed how the `TypeCheckProgramHost` worked under the hood during the
creation of a template type-checking program. This work enabled a more
incremental flow for template type-checking, but unintentionally introduced
several regressions in performance, caused by poor incrementality during
`ts.Program` creation.
1. The `TypeCheckProgramHost` was made to rely on the `ts.CompilerHost` to
retrieve instances of `ts.SourceFile`s from the original program. If the
host does not return the original instance of such files, but instead
creates new instances, this has two negative effects: it incurs
additional parsing time, and it interferes with TypeScript's ability to
reuse information about such files.
2. During the incremental creation of a `ts.Program`, TypeScript compares
the `referencedFiles` of `ts.SourceFile` instances from the old program
with those in the new program. If these arrays differ, TypeScript cannot
fully reuse the old program. The implementation of reference tagging
introduced in 4213e8d5 restores the original `referencedFiles` array
after a `ts.Program` is created, which means that future incremental
operations involving that program will always fail this comparison,
effectively limiting the incrementality TypeScript can achieve.
Problem 1 exacerbates problem 2: if a new `ts.SourceFile` is created by the
host after shim generation has been disabled, it will have an untagged
`referencedFiles` array even if the original file's `referencedFiles` was
not restored, triggering problem 2 when creating the template type-checking
program.
To fix these issues, `referencedFiles` arrays are now restored on the old
`ts.Program` prior to the creation of a new incremental program. This allows
TypeScript to get the most out of reusing the old program's data.
Additionally, the `TypeCheckProgramHost` now uses the original `ts.Program`
to retrieve original instances of `ts.SourceFile`s where possible,
preventing issues when a host would otherwise return fresh instances.
Together, these fixes ensure that program reuse is as incremental as
possible, and tests have been added to verify this for certain scenarios.
An optimization was further added to prevent the creation of a type-checking
`ts.Program` in the first place if no type-checking is necessary.
PR Close#37690
We recently added a transformer to NGC that is responsible for downleveling Angular
decorators and constructor parameter types. The primary goal was to mitigate a
TypeScript limitation/issue that surfaces in Angular projects due to the heavy
reliance on type metadata being captured for DI. Additionally this is a pre-requisite
of making `tsickle` optional in the Angular bazel toolchain.
See: 401ef71ae5b01be95d124184a0b6936fc453a5d4 for more context on this.
Another (less important) goal was to make sure that the CLI can re-use
this transformer for its JIT mode compilation. The CLI (as outlined in
the commit mentioned above), already has a transformer for downleveling
constructor parameters. We want to avoid this duplication and exported
the transform through the tooling-private compiler entry-point.
Early experiments in using this transformer over the current one, highlighted
that in JIT, class decorators cannot be downleveled. Angular relies on those
to be invoked immediately for JIT (so that factories etc. are generated upon loading)
The transformer we exposed, always downlevels such class decorators
though, so that would break CLI's JIT mode. We can address the CLI's
needs by adding another flag to skip class decorators. This will allow
us to continue with the goal of de-duplication.
PR Close#37545
Commit 24b2f1da2b introduced an `NgCompiler` which operates on a
`ts.Program` independently of the `NgtscProgram`. The NgCompiler got its
`IncrementalDriver` (for incremental reuse of Angular compilation results)
by looking at a monkey-patched property on the `ts.Program`.
This monkey-patching operation causes problems with the Angular indexer
(specifically, it seems to cause the indexer to retain too much of prior
programs, resulting in OOM issues). To work around this, `IncrementalDriver`
reuse is now handled by a dedicated `IncrementalBuildStrategy`. One
implementation of this interface is used by the `NgtscProgram` to perform
the old-style reuse, relying on the previous instance of `NgtscProgram`
instead of monkey-patching. Only for `NgTscPlugin` is the monkey-patching
strategy used, as the plugin sits behind an interface which only provides
access to the `ts.Program`, not a prior instance of the plugin.
PR Close#37339
Currently the partial evaluator isn't able to resolve a variable declaration that uses destructuring in the form of `const {value} = {value: 0}; const foo = value;`. These changes add some logic to allow for us to resolve the variable's value.
Fixes#36917.
PR Close#37497
Previously, ngcc would only be able to match an ngcc configuration to
packages that were located inside the project's top-level
`node_modules/`. However, if there are multiple versions of a package in
a project (e.g. as a transitive dependency of other packages), multiple
copies of a package (at different versions) may exist in nested
`node_modules/` directories. For example, one at
`<project-root>/node_modules/some-package/` and one at
`<project-root>/node_modules/other-package/node_modules/some-package/`.
In such cases, ngcc was only able to detect the config for the first
copy but not for the second.
This commit fixes this by returning a new instance of
`ProcessedNgccPackageConfig` for each different package path (even if
they refer to the same package name). In these
`ProcessedNgccPackageConfig`, the `entryPoints` paths have been
processed to take the package path into account.
PR Close#37040
This commit adds a `packageName` property to the `EntryPoint` interface.
In a subsequent commit this will be used to retrieve the correct ngcc
configuration for each package, regardless of its path.
PR Close#37040
In order to retrieve the ngcc configuration (if any) for an entry-point,
ngcc has to detect the containing package's version.
Previously, ngcc would try to read the version from the entry-point's
`package.json` file, which was different than the package's top-level
`package.json` for secondary entry-points. For example, it would try to
read it from `node_modules/@angular/common/http/package.json` for
entry-point `@angular/common/http`. However, the `package.json` files
for secondary entry-points are not guaranteed to include a `version`
property.
This commit fixes this by first trying to read the version from the
_package's_ `package.json` (falling back to the entry-point's
`package.json`). For example, it will first try to read it from
`@angular/common/package.json` for entry-point `@angular/common/http`.
PR Close#37040
This commit refactors the way info is retrieved from entry-point
`package.json` files to make it easier to extract more info (such as the
package's name) in the future. It also avoids reading and parsing the
`package.json` file multiple times (as was happening before).
PR Close#37040
Rename the `package` property to `packagePath` on the `EntryPoint`
interface. This makes it more clear that the `packagePath` property
holds the absolute path to the containing package (similar to how `path`
holds the path to the entry-point). This will also align with the
`packageName` property that will be added in a subsequent commit.
This commit also re-orders the `EntryPoint` properties to group related
properties together and to match the order of properties on instances
with that on the interface.
PR Close#37040
Previously, when an entry-point was ignored via an ngcc config, ngcc
would scan sub-directories for sub-entry-points, but would not use the
correct `packagePath`. For example, if `@angular/common` was ignored, it
would look at `@angular/common/http` but incorrectly use
`.../@angular/common/http` as the `packagePath` (instead of
`.../@angular/common`). As a result, it would not retrieve the correct
ngcc config for the actual package.
This commit fixes it by ensuring the correct `packagePath` is used, even
if the primary entry-point corresponding to that path is ignored. In
order to do this, a new return value for `getEntryPointInfo()` is added:
`IGNORED_ENTRY_POINT`. This is used to differentiate between directories
that correspond to no or an incompatible entry-point and those that
correspond to an entry-point that could otherwise be valid but is
explicitly ignored. Consumers of `getEntryPointInfo()` can then use this
info to discard ignored entry-points, but still use the correct
`packagePath` when scanning their sub-directories for secondary
entry-points.
PR Close#37040
Adds @nocollapse to static properties added by ngcc
iff annotateForClosureCompiler is true.
The Closure Compiler will collapse static properties
into the global namespace. Adding this annotation keeps
the properties attached to their respective object, which
allows them to be referenced via a class's constructor.
The annotation is already added by ngtsc and ngc under the
same option, this commit extends the functionality to ngcc.
Closes#36618.
PR Close#36652
It is quite common for the TS compiler to have to add synthetic
types to function signatures, where the developer has not
explicitly provided them. This results in `import(...)` expressions
appearing in typings files. For example in `@ngrx/data` there is a
class with a getter that has an implicit type:
```ts
export declare class EntityCollectionServiceBase<...> {
...
get store() {
return this.dispatcher.store;
}
...
}
```
In the d.ts file for this we get:
```ts
get store(): Store<import("@ngrx/data").EntityCache>;
```
Given that this file is within the `@ngrx/data` package already,
this caused ngcc to believe that there was a circular dependency,
causing it to fail to process the package - and in fact crash!
This commit resolves this problem by ignoring `import()` expressions
when scanning typings programs for dependencies. This ability was
only introduced very recently in a 10.0.0 RC release, and so it has
limited benefit given that up till now ngcc has been able to process
libraries effectively without it. Moreover, in the rare case that a
package does have such a dependency, it should get picked up
by the sync ngcc+CLI integration point.
PR Close#37503
In v7 of Angular we removed `tsickle` from the default `ngc` pipeline.
This had the negative potential of breaking ES2015 output and SSR due
to a limitation in TypeScript.
TypeScript by default preserves type information for decorated constructor
parameters when `emitDecoratorMetadata` is enabled. For example,
consider this snippet below:
```
@Directive()
export class MyDirective {
constructor(button: MyButton) {}
}
export class MyButton {}
```
TypeScript would generate metadata for the `MyDirective` class it has
a decorator applied. This metadata would be needed in JIT mode, or
for libraries that provide `MyDirective` through NPM. The metadata would
look as followed:
```
let MyDirective = class MyDir {}
MyDirective = __decorate([
Directive(),
__metadata("design:paramtypes", [MyButton]),
], MyDirective);
let MyButton = class MyButton {}
```
Notice that TypeScript generated calls to `__decorate` and
`__metadata`. These calls are needed so that the Angular compiler
is able to determine whether `MyDirective` is actually an directive,
and what types are needed for dependency injection.
The limitation surfaces in this concrete example because `MyButton`
is declared after the `__metadata(..)` call, while `__metadata`
actually directly references `MyButton`. This is illegal though because
`MyButton` has not been declared at this point. This is due to the
so-called temporal dead zone in JavaScript. Errors like followed will
be reported at runtime when such file/code evaluates:
```
Uncaught ReferenceError: Cannot access 'MyButton' before initialization
```
As noted, this is a TypeScript limitation because ideally TypeScript
shouldn't evaluate `__metadata`/reference `MyButton` immediately.
Instead, it should defer the reference until `MyButton` is actually
declared. This limitation will not be fixed by the TypeScript team
though because it's a limitation as per current design and they will
only revisit this once the tc39 decorator proposal is finalized
(currently stage-2 at time of writing).
Given this wontfix on the TypeScript side, and our heavy reliance on
this metadata in libraries (and for JIT mode), we intend to fix this
from within the Angular compiler by downleveling decorators to static
properties that don't need to evaluate directly. For example:
```
MyDirective.ctorParameters = () => [MyButton];
```
With this snippet above, `MyButton` is not referenced directly. Only
lazily when the Angular runtime needs it. This mitigates the temporal
dead zone issue caused by a limitation in TypeScript's decorator
metadata output. See: https://github.com/microsoft/TypeScript/issues/27519.
In the past (as noted; before version 7), the Angular compiler by
default used tsickle that already performed this transformation. We
moved the transformation to the CLI for JIT and `ng-packager`, but now
we realize that we can move this all to a single place in the compiler
so that standalone ngc consumers can benefit too, and that we can
disable tsickle in our Bazel `ngc-wrapped` pipeline (that currently
still relies on tsickle to perform this decorator processing).
This transformation also has another positive side-effect of making
Angular application/library code more compatible with server-side
rendering. In principle, TypeScript would also preserve type information
for decorated class members (similar to how it did that for constructor
parameters) at runtime. This becomes an issue when your application
relies on native DOM globals for decorated class member types. e.g.
```
@Input() panelElement: HTMLElement;
```
Your application code would then reference `HTMLElement` directly
whenever the source file is loaded in NodeJS for SSR. `HTMLElement`
does not exist on the server though, so that will become an invalid
reference. One could work around this by providing global mocks for
these DOM symbols, but that doesn't match up with other places where
dependency injection is used for mocking DOM/browser specific symbols.
More context in this issue: #30586. The TL;DR here is that the Angular
compiler does not care about types for these class members, so it won't
ever reference `HTMLElement` at runtime.
Fixes#30106. Fixes#30586. Fixes#30141.
Resolves FW-2196. Resolves FW-2199.
PR Close#37382
The new tooling-cli-shared-api is used to guard changes to packages/compiler-cli/src/tooling.ts
which is a private API sharing channel between Angular FW and CLI.
Changes to this file should be rare and explicitly approved by at least two members
of the CLI team.
PR Close#37467
Now in TS 3.9, classes in ES2015 can be wrapped in an IIFE.
This commit ensures that we still find the static properties that contain
decorator information, even if they are attached to the adjacent node
of the class, rather than the implementation or declaration.
Fixes#37330
PR Close#37436
This finder is designed to only process entry-points that are reachable
by the program defined by a tsconfig.json file.
It is triggered by calling `mainNgcc()` with the `findEntryPointsFromTsConfigProgram`
option set to true. It is ignored if a `targetEntryPointPath` has been
provided as well.
It is triggered from the command line by adding the `--use-program-dependencies`
option, which is also ignored if the `--target` option has been provided.
Using this option can speed up processing in cases where there is a large
number of dependencies installed but only a small proportion of the
entry-points are actually imported into the application.
PR Close#37075
Previously we only checked for static import declaration statements.
This commit also finds import paths from dynamic import expressions.
Also this commit should speed up processing: Previously we were parsing
the source code contents into a `ts.SourceFile` and then walking the parsed
AST to find import paths.
Generating an AST is unnecessary work and it is faster and creates less
memory pressure to just scan the source code contents with the TypeScript
scanner, identifying import paths from the tokens.
PR Close#37075
Previously this host was skipping files if they had imports that spanned
multiple lines, or if the import was a dynamic import expression.
PR Close#37075
This commit will store a cached copy of the parsed tsconfig
that can be reused if the tsconfig path is the same.
This will improve the ngcc "noop" case, where there is no processing
to do, when the entry-points have already been processed.
Previously we were parsing this config every time we checked for
entry-points to process, which can take up to seconds in some
cases.
Resolves#36882
PR Close#37417
`NgCompiler` is the heart of ngtsc and can be used to analyze and compile
Angular programs in a variety of environments. Most of these integrations
rely on `NgProgram` and the creation of an `NgCompilerHost` in order to
create a `ts.Program` with the right shape for `NgCompiler`.
However, certain environments (such as the Angular Language Service) have
their own mechanisms for creating `ts.Program`s that don't make use of a
`ts.CompilerHost`. In such environments, an `NgCompilerHost` does not make
sense.
This commit breaks the dependency of `NgCompiler` on `NgCompilerHost` and
extracts the specific interface of the host on which `NgCompiler` depends
into a new interface, `NgCompilerAdapter`. This interface includes methods
from `ts.CompilerHost`, the `ExtendedTsCompilerHost`, as well as APIs from
`NgCompilerHost`.
A consumer such as the language service can implement this API without
needing to jump through hoops to create an `NgCompilerHost` implementation
that somehow wraps its specific environment.
PR Close#37118
When the compiler encounters a function call within an NgModule imports
section, it attempts to resolve it to an NgModule-annotated class by
looking at the function body and evaluating the statements there. This
evaluation can only understand simple functions which have a single
return statement as their body. If the function the user writes is more
complex than that, the compiler won't be able to understand it and
previously the PartialEvaluator would return a "DynamicValue" for
that import.
With this change, in the event the function body resolution fails the
PartialEvaluator will now attempt to use its foreign function resolvers to
determine the correct result from the function's type signtaure instead. If
the function is annotated with a correct ModuleWithProviders type, the
compiler will be able to understand the import without static analysis of
the function body.
PR Close#37126
Currently, if an ngcc process is killed in a manner that it doesn't clean
up its lock file (or is killed too quickly) the compiler reports that it
is waiting on the PID of a process that doesn't exist, and that it will
wait up to a maximum of N seconds. This PR updates the locking code to
additionally check if the process exists, and if it does not it will
immediately bail out, and print the location of the lock file so a user
may clean it up.
PR Close#37250
Inline source-maps in typings files can impact IDE performance
so ngcc should only add such maps if the original typings file
contains inline source-maps.
Fixes#37324
PR Close#37363
Due to an outage with the proxy we rely on for publishing, we need
to temporarily directly publish to NPM using our own angular
credentials again.
PR Close#37378
In #37221 we disabled tsickle passes from transforming the tsc output that is used to publish all
Angular framework and components packages (@angular/*).
This change however revealed a bug in the ngc that caused __decorate and __metadata calls to still
be emitted in the JS code even though we don't depend on them.
Additionally it was these calls that caused code in @angular/material packages to fail at runtime
due to circular dependency in the emitted decorator code documeted as
https://github.com/microsoft/TypeScript/issues/27519.
This change partially rolls back #37221 by reenabling the decorator to static fields (static
properties) downleveling.
This is just a temporary workaround while we are also fixing root cause in `ngc` - tracked as
FW-2199.
Resolves FW-2198.
Related to FW-2196
PR Close#37317
As of TypeScript 3.9, the tsc emit is not compatible with Closure
Compiler due to
https://github.com/microsoft/TypeScript/pull/32011.
There is some hope that this will be fixed by a solution like the one
proposed in
https://github.com/microsoft/TypeScript/issues/38374 but currently it's
unclear if / when that will
happen.
Since the Closure support has been somewhat already broken, and the
tsickle pass has been a source
of headaches for some time for Angular packages, we are removing it for
now while we rethink our
strategy to make Angular Closure compatible outside of Google.
This change has no effect on our Closure compatibility within Google
which work well because all the
code is compiled from sources and passed through tsickle.
This change only disables the tsickle pass but doesn't remove it.
A follow up PR should either remove all the traces of tscikle or
re-enable the fixed version.
BREAKING CHANGE: Angular npm packages no longer contain jsdoc comments
to support Closure Compiler's advanced optimizations
The support for Closure compiler in Angular packages has been
experimental and broken for quite some
time.
As of TS3.9 Closure is unusable with the JavaScript emit. Please follow
https://github.com/microsoft/TypeScript/issues/38374 for more
information and updates.
If you used Closure compiler with Angular in the past, you will likely
be better off consuming
Angular packages built from sources directly rather than consuming the
version we publish on npm
which is primarily optimized for Webpack/Rollup + Terser build pipeline.
As a temporary workaround you might consider using your current build
pipeline with Closure flag
`--compilation_level=SIMPLE`. This flag will ensure that your build
pipeline produces buildable and
runnable artifacts, at the cost of increased payload size due to
advanced optimizations being disabled.
If you were affected by this change, please help us understand your
needs by leaving a comment on https://github.com/angular/angular/issues/37234.
PR Close#37221
In ES2015 IIFE wrapped classes, the identifier that would reference the class
of the NgModule may be an alias variable. Previously the `Esm2015ReflectionHost`
was not able to match this alias to the original class declaration. This resulted
in failing to identify some `ModuleWithProviders` functions in such case.
These IIFE wrapped classes were introduced in TypeScript 3.9, which is why
this issue is only recently appearing. Since 9.1.x does not support TS 3.9
there is no reason to backport this commit to that branch.
Fixes#37189
PR Close#37206
To better check that the code is working, this commit gives a
distinct name (`DecoratedWrappedClass_1`) to the "adjacent"
class declaration in the tests.
PR Close#37206
Tslib version is bound to the TypeScript version used to compile the library. Thus, we shouldn't list `tslib` as a `peerDependencies`. This is because, a user can install libraries which have been compiled with older versions of TypeScript and thus require multiple `tslib` versions to be installed.
Reference: TOOL-1374 and TOOL-1375
Closes: #37188
PR Close#37198
The work to support case-sensitivity in the `FileSystem` went too far
with the `LogicalFileSystem`, which is used to compute import paths
that will be added to files processed by ngtsc and ngcc.
Previously all logical paths were canonicalised, which meant that on
case-insensitive file-systems, the paths were all set to lower case.
This resulted in incorrect imports being added to files. For example:
```
import { Apollo } from './Apollo';
import { SelectPipe } from './SelectPipe';
import * as ɵngcc0 from '@angular/core';
import * as ɵngcc1 from './selectpipe';
```
The import from `./SelectPipe` is from the original file, while the
import from `./selectpipe` is added by ngcc. This causes the
TypeScript compiler to complain, or worse for paths not to be
matched correctly.
Now, when computing logical paths, the original absolute paths
are matched against rootDirs in a canonical manner, but the actual
logical path that is returned maintains it original casing.
Fixes#36992, #36993, #37000
PR Close#37008
With this change we drop support for TypeScript 3.8 and remove all related tests.
BREAKING CHANGE:
TypeScript 3.8 is no longer supported, please update to TypeScript 3.9.
PR Close#37129
In some versions of TypeScript, the transformation of synthetic
`$localize` tagged template literals is broken.
See https://github.com/microsoft/TypeScript/issues/38485
We now compute what the expected final output target of the
compilation will be so that we can generate ES5 compliant
`$localize` calls instead of relying upon TS to do the downleveling
for us.
This is a workaround for the TS compiler bug, which could be removed
when this is fixed. But since it only affects ES5 targeted compilations,
which is now not the norm, it has limited impact on the majority of
Angular projects. So this fix can probably be left in indefinitely.
PR Close#36989
In TypeScript 3.9 some re-export syntaxes have changed to be getter
functions (created by calls to `Object.defineProperty()`) rather than
simple property accessors.
This commit adds support into the CommonJS and UMD reflection hosts
for this style of re-export syntax.
PR Close#36989
