This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
This adds `insertTStyleValue` but does not hook it up to anything yet.
The purpose of this function is to create a linked-list of styling
related bindings. The bindings can be traversed during flush.
The linked list also keeps track of duplicates. This is important
for binding to know if it needs to check other styles for reconciliation.
PR Close#34004
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
Unlike in View Engine, we currently reset the dirty state of
components in the check no changes change detection cycle.
This means that components cannot be marked as dirty from
view lifecycle hooks because the dirty state is reset and
the lifecycle hooks do not run in the check no changes CD cycle.
PR Close#34495
We have a couple of cases where we use something like `typeof Node === 'function'` to figure out whether we're in a worker context. This works in most browsers, but IE returns `object` instead of `function`. I've updated all the usages to account for it.
PR Close#34305
TypeScript 3.7 flags `if` conditions that implicitly coerce a function/method definition. While checking for the `template` presence on a def (actually checking whether we work with Component) in `saveNameToExportMap`, the `if` condition had implicit type coercion. This commit updates the condition to use the `isComponentDef` function (that checks `def.template` against `null` internally) to avoid compilation errors with TypeScript 3.7.
PR Close#34335
Prior to this commit, calling change detection for destroyed views resulted in errors being thrown in some cases. This commit adds a check to make sure change detection is invoked for non-destroyed views only.
PR Close#34241
Previously if a type was returning itself it would cause an infinite loop in tsickle. We worked around it with a type that alises to `any`. Now that the issue has been resolved in tsickle, we can clean up the workaround.
PR Close#34019
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
TNode.inputs are initialised during directives resolution now so we know early
if a node has directives with inputs or no. We don't need to use undefined value
as an indicator that inputs were not resolved yet.
PR Close#33798
Before this change a public name of a directive's input
was stored in 2 places:
- as a key of an object on TNode.index;
- as a value of PropertyAliasValue at the index 1
This PR changes the data structure so the public name is stored
only once as a key on TNode.index. This saves one array entry
for each and every directive input.
PR Close#33798
Prior to this change, ComponentFactory.create function invocation in Ivy retained the content of the host element (in case host element reference or CSS seelctor is provided as an argument). This behavior is different in View Engine, where the content of the host element was cleared, except for the case when ShadowDom encapsulation is used (to make sure native slot projection works). This commit aligns Ivy and View Engine and makes sure the host element is cleared before component content insertion.
PR Close#33487
When debugging `LView`s it is easy to get lost since all of them have
the same name. This change does three things:
1. It makes `TView` have an explicit type:
- `Host`: for the top level `TView` for bootstrap
- `Component`: for the `TView` which represents components template
- `Embedded`: for the `TView` which represents an embedded template
2. It changes the name of `LView` to `LHostView`, `LComponentView`, and
`LEmbeddedView` depending on the `TView` type.
3. For `LComponentView` and `LEmbeddedView` we also append the name of
of the `context` constructor. The result is that we have `LView`s which
are name as: `LComponentView_MyComponent` and `LEmbeddedView_NgIfContext`.
The above changes will make it easier to understand the structure of the
application when debugging.
NOTE: All of these are behind `ngDevMode` and will get removed in
production application.
PR Close#33449
This patch introduces a `firstUpdatePass` flag which can be used inside
of instruction code to determine if this is the first time each
instruction is running inside of the update block of a template or
a hostBindings function.
PR Close#31270
In ViewEngine we used to throw an error if we encountered an unknown element while rendering. We have this already for Ivy in AoT, but we didn't in JiT. These changes implement the error for JiT mode.
PR Close#33419
Before this change instantiating multiple directives on the same
host node would result in repeated RNode retrieval and patching.
This commint re-organises code around directive instance creation
so the host node processing (common to all directives) happens
once and only once.
As the additional benefit the directive instantiation logic gets
centralised in one function (at the expense of patching logic
duplication for root node).
PR Close#33322
`bindingIndex` stores the current location of the bindings in the
template function. Because it used to be stored in `LView` that `LView`
was not reentrant. This could happen if a binding was a getter and had
a side-effect of calling `detectChanges()`.
By moving the `bindingIndex` to `LFrame` where all of the global state
is kept in reentrant way we correct the issue.
PR Close#33235
`LFrame` stores information specifice to the current `LView` As the code
enters and leaves `LView`s we use `enterView()` and `leaveView()`
respectively to build a a stack of `LFrame`s. This allows us to easily
restore the previous `LView` instruction state.
PR Close#33178
Prior to this commit, all `className` inputs were not set because the runtime code assumed that the `classMap` instruction is only generated for `[class]` bindings. However the `[className]` binding also produces the same `classMap`, thus the code needs to distinguish between `class` and `className`. This commit adds extra logic to select the right input name and also throws an error in case `[class]` and `[className]` bindings are used on the same element simultaneously.
PR Close#33188
This change assures that data structures related to initial inputs
(ones set from static attributes) are created only once (during the
first template pass) and no additional runtime checks are done for
subsequent passes.
Additionally this commit changes the data structure used by initial inputs
on TNode - previously initial inputs for a directive were stored at the
directive index in LView. This meant that an array holding initial inputs
was relativelly big and had many null elements (as placeholders for elements,
directives, injector etc.). After the change we only create an array of a size
equal to a number of directives matched on a given TNode.
For the `directive_instantiate` benchmark it boils to allocating a 1-element
array vs. 100-element array previously.
PR Close#33195
Prior to this commit, Ivy runtime asserted that a given element is an instance of a DOM node. These asserts may not be correct in case custom renderer is used, which operates objects with a shape different than DOM nodes. This commit updates the code to avoid the mentioned checks in case procedural renderer is used.
PR Close#33156
Based on the results of the `directive_instantiate` executing host
bindings logic (in creation mode) account for ~23% of time spent in
the directive instantiation, even if a directive doesn't have host
bindings! This is clearly wastful hence a new flag.
PR Close#33102
Currently Ivy stores the element attributes into an array above the component def and passes it into the relevant instructions, however the problem is that upon minification the array will get a unique name which won't compress very well. These changes move the attributes array into the component def and pass in the index into the instructions instead.
Before:
```
const _c0 = ['foo', 'bar'];
SomeComp.ngComponentDef = defineComponent({
template: function() {
element(0, 'div', _c0);
}
});
```
After:
```
SomeComp.ngComponentDef = defineComponent({
consts: [['foo', 'bar']],
template: function() {
element(0, 'div', 0);
}
});
```
A couple of cases that this PR doesn't handle:
* Template references are still in a separate array.
* i18n attributes are still in a separate array.
PR Close#32798
Accessing a string's character at index allocates a new, single character string.
A better (faster) check is to use `charCodeAt` that doesn't trigger allocation.
This simple change speeds up the element_text_create benchmark by ~7%.
PR Close#32997
Prior to this change, ng-reflect properties were not created in case an attribute was marked as translatable (for ex. `i18n-title`). This commit adds the logic to generate ng-reflect for such cases.
PR Close#32989
Child component refresh must happen before executing the ViewQueryFn because
child components could insert a template from the host that contains the result
of the ViewQuery function (see related test added in this PR).
PR Close#32922
Prior to this patch, each time `advance()` would run (or when a
templateFn or hostBindings code exits) then the core change detection
code would check to see whether the styling data needs to be reset. This
patch removes that functionality and places everything inside of the
scheduled styling exit function. This means that each time one or more
styling bindings run (even if the value hasn't changed) then an exit
function will be scheduled and that will do all the cleanup.
PR Close#32591
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
Currently all property instructions eventually call into `elementPropertyInternal` which in turn calls to `getLView`, however all of the instructions already have access to the LView. These changes switch to passing in the LView as a parameter.
PR Close#32681
This perf-focused refactoring moves the TNode's input / output initialization
logic to the first template pass - close to the place where directives are
matched and resolved.
This code change makes it possible to update-mode checks for both property
bindings and listeners registration.
PR Close#32608
