The bazel-schematics integration test in the 7.2.x branch no longer runs
successfully as unpinned dependencies are now being pulled in as newer
versions, which require a newer version of NodeJS than is provisioned on
CI. Since Bazel is a Labs project in 7.x there's no reason to keep these
tests around.
To avoid showing outdated info (such as events, resources, etc.) but
still allow people to see docs for older versions, we redirect
non-documentation URLs to `/docs`. Recently(-ish) we have added
documentation content under the `/cli/...` and `/start/...`
path-prefixes, but we haven't added them to the list of documentation
URLs that should not be redirected. As a result, on archive deployments
(e.g. https://v7.angular.io/cli), they are redirected to `/docs`, making
it impossible to see the documentation for these versions (unless you
know about the `?mode=stable` work-around).
This commit fixes it by adding `cli` and `start` to the list of
documentation URLs that are excluded from redirection.
Previously, the processor that excludes certain cli commands
(`filterHiddenCommand`) was being run after the `createSitemap`
processor, resulting in those commands to be present in `sitemap.xml`,
while the actual pages where missing. This also resulted in 404s, when
search engine crawlers tried to index the missing URLs.
This commit fixes it by ensuring that the `filterHiddenCommand`
processor is run before the `createSitemap` processor.
PR Close#30395
Previously, the `aio_monitoring_stable` job (which runs tests against
https://angular.io/) was using the tests from the master branch. As a
result, if the master branch included changes in those tests that were
not yet backported to the stable branch (and thus deployed to
https://angular.io/), the tests would fail.
This commit fixes this by using the tests from the stable branch to test
against https://angular.io/.
Fixes#30101
PR Close#30110
Previously, the `aio_monitoring` job was testing both the stable
(https://angular.io/) and the @next (https://next.angular.io/) versions.
This commit splits the tests into two separate jobs (still run as part
of the same workflow). This speeds up the tests (since the two jobs can
now run in parallel) and makes it easier to isolate failures (e.g.
identify which branch is failing, disable one of the two, etc.).
(Credits to @petebacondarwin 😉)
PR Close#30110
The job started failing for https://angular.io/, due to changes in tests
that only affected https://next.angular.io/, and was disabled in #30102.
This commit re-enables the job (since it does not block anything and it
will be fixed in a subsequent commit).
PR Close#30110
With #30058, the ngUpgrade internal `angular.module()` method wa
renamed to `angular.module_()` (to avoid a webpack bug).
Merging #29794 afterwards resulted in some broken tests, because it
still used the old `angular.module()` method name. (The PR had been
tested on CI against a revision that did not contain the rename.)
This commit fixes the broken tests by renaming the remaining occurrences
of `angular.module()`.
PR Close#30107
Previously, under certain circumstances, `NgZone#onMicrotaskEmpty` could
emit while a `$digest` was in progress, thus triggering another
`$digest`, which in turn would throw a `$digest already in progress`
error. Furthermore, throwing an error from inside the `onMicrotaskEmpty`
subscription would result in unsubscribing and stop triggering further
`$digest`s, when `onMicrotaskEmpty` emitted.
Usually, emitting while a `$digest` was already in progress was a result
of unintentionally running some part of AngularJS outside the Angular
zone, but there are valid (if rare) usecases where this can happen
(see #24680 for details).
This commit addresses the issue as follows:
- If a `$digest` is in progress when `onMicrotaskEmpty` emits, do not
trigger another `$digest` (to avoid the error). `$evalAsync()` is used
instead, to ensure that the bindings are evaluated at least once more.
- Since there is still a high probability that the situation is a result
of programming error (i.e. some AngularJS part running outside the
Angular Zone), a warning will be logged, but only if the app is in
[dev mode][1].
[1]: https://github.com/angular/angular/blob/78146c189/packages/core/src/util/ng_dev_mode.ts#L12Fixes#24680
PR Close#29794
PR Close#30107
When targeting ES2015 (as is the default in cli@8), `const` is not
downleveled to `var` and thus declaring `const module` throws an error
due to webpack wrapping the code in a function call with a `module`
argument (even when compiling for the `web` environment).
Related: webpack/webpack#7369
Fixes#30050
PR Close#30058
PR Close#30107
The exact messages depend on the timing of several events and may vary
between runs. This occasionally causes flakes on CI.
This commit reduces the risk of flakes by loosen the conditions to only
check for what we actually care about.
Fixes#29544
PR Close#29757
This directory contains some top-level files (`.gitignore`,
`tsconfig.json`, `tslint.json`) that are related to the examples
infrastructure (building, linting, etc.).
They had previously no owner; now they are owned by the `docs-infra`
group.
PR Close#30087
Previously, an instance of HttpParams would retain its list of mutations
after they have been materialized as a result of a read operation. Not
only does this unnecessarily hold onto memory, more importantly does it
introduce a bug where branching of off a materialized instance would
reconsider the set of mutations that had already been applied, resulting
in repeated application of mutations.
This commit fixes the bug by clearing the list of pending mutations
after they have been materialized, such that they will not be considered
once again for branched off instances.
Fixes#20430
PR Close#29045
This minimises the risk of unexpected failures due to breaking changes,
when building a new image (e.g. as a result of an unrelated config
change in Dockerfile).
PR Close#29976
Previously, the preview server docker image was based on Debian 8
(jessie). Recently, `jessie-updates` and `jessie-backborts` were removed
from the Debian mirrors ([more info][1]), thus breaking new builds of
the image.
Instead of updating `/etc/apt/sources.list` to remove the obsolete
sources, this commit upgrades to Debian 9 (stretch).
(The GCE VM running the preview server docker container was also
upgraded from Debian 8 to 9 this morning.)
---
Other changes:
- Removed dependency on `chkconfig`, which is not supported on Debian 9.
- Installing `nginx` from the regular repositories (instead of
`*-backports).
- Upgraded to `pm2` v3, which can handle hooking itself up to system
startup better (without `chkconfig` - see above).
- Updated tests to reflect the fact that `nginx` has dropped the reason
phrase in response status lines for HTTP/2 (in compliance with
[the spec][2]). (HTTP/1.1: `HTTP/1.1 200 OK` | HTTP/2: `HTTP/2 200`)
[1]: https://www.lucas-nussbaum.net/blog/?p=947
[2]: https://http2.github.io/http2-spec/#rfc.section.8.1.2.4
PR Close#29976
In #29926, the size of the build artifacts has increased due to turning
on differential loading (which generates an es2015/es5 pair for each JS
resource).
To avoid the preview server's rejecting the build artifacts (as in
[288181][1]), this commit increases the max allowed artifact size from
20MB to 25MB (current artifact size after #29926 is ~22MB).
[1]: https://circleci.com/gh/angular/angular/288181
PR Close#29976
The 7.2.x does not include the code necessary to build with Ivy. The
`test_aio_local_ivy` job needs to be skipped on 7.2.x.
The job was accidentally enabled while rebasing 1cdffbdc2.
PR Close#29993
In #29953, the wait period for SW on localhost was increased to avoid CI
flakes for the PWA score tests.
This commit expands the fix to non-localhost origins to avoid flakes in
the `aio_monitoring` job, when CircleCI VMs/network are slow.
(For reference, example failures: [289127], [289238])
[289127]: https://circleci.com/gh/angular/angular/289127
[289238]: https://circleci.com/gh/angular/angular/289238
PR Close#29988
In light of #29926, that will change the path of `tsconfig.app.json`,
this commit switches from a hard-coded `tsconfig.app.json` path to
looking it up in `angular.json` (to be more future-proof).
PR Close#29989
Previously, the `build-with-ivy` script could be used to build the `aio`
project with Ivy (once it had been prepared with `ivy-ngcc`, etc.) and
then restored the configuration (e.g. `tsconfig.json`) to non-ivy mode.
As a result, it was not useful for running other commands (e.g. unit/e2e
tests) in Ivy mode.
This commit renames the script to `switch-to-ivy` and employs a
different model (similar to `ng-packages-installer`), where the project
is setup to run in Ivy mode and then all subsequent commands are
executed in that mode (until restored).
Since this is currently only used on CI, there is no automatic way to
switch back to non-ivy mode (but it could be implemented in the future
if needed).
Finally, the script now modifies `src/tsconfig.app/json` instead of
`tsconfig.json` to ensure that the `angularCompilerOptions` are not
ignored/overwritten. This is also closer to what the cli generates
with the `--enable-ivy` option.
PR Close#29989
To better test ngcc (in addition to Ivy) on angular.io, change the
`test_aio_local_ivy` CircleCI job to use the pre-ivy Angular packages
(and have ngcc transform them to Ivy ones).
PR Close#29989
The server used for testing on localhost has less optimizations (e.g.
serves uncompressed files), so we need to wait longer the ServiceWorker
to be loaded and registered to allow Lighthouse to reliably detect it,
especially on slower environments (e.g. CI).
Related: https://github.com/GoogleChrome/lighthouse/issues/5527#issuecomment-483710849Fixes#29910
PR Close#29953
The PWA score tests have been occasionally failing on CI recently
(possibly due to CI VM/network issues).
This commit temporarily disables them, until we investigate the
root-cause and/or put a work-around in place.
The PWA score tests are still run against the deployed versions (which
don't suffer as much) or PRs with public previews (as part of the
`test_aio_preview` job) and on upstream builds (as part of the
`deploy_aio` job).
Related to #29910.
[1]: https://github.com/angular/angular/blob/3a836c362/.circleci/config.yml#L390
PR Close#29911
As of b9fead7f8, the image is referenced in `announcements.json`, but it
was already removed (as it wasn't used at the time) in 7f905da33.
PR Close#29902
We are using `chrome-launcher` and `lighthouse-logger` in
[test-pwa-score][1], but we do not explicitly list them as
`devDependencies`, so we are relying on the fact that they happen to be
hoisted in `node_modules/` by yarn. This may unexpectedly break in the
future.
This commit fixes this, by explicitly listing them as `devDependencies`.
[1]: https://github.com/angular/angular/blob/ea70d41ac/aio/scripts/test-pwa-score.js#L14-L18
PR Close#29904
1) Path mappings are to be added in the workspace tsconfig files, hence the path needs to be `./` and not `../`
2) Fix export symbol as it cannot contain `-`
Fixes#29807
PR Close#29810
Run all targets with RBE config. Previously we filtered out one target, //tools/ts-api-guardian:tests, and ran that with a different bazelrc
PR Close#29731
The `announcements.json` file should not be included in the sitemap and
including it causes an error in Google Search Console (because the
generated URL does not exist).
(This is a follow-up to fbef94a8e.)
PR Close#29754
Now, one can add an `@alias` tag to API docs, which tells dgeni that this
API element (usually a `const`) is really just an alias for some API element
defined elsewhere.
Dgeni will then look up this API element and copy over the properties from
the alias to the current doc.
For example, we would like to privately export an Enum from `@angular/core`
but then publicly export this from `@angular/common`:
**packages/core/private_exports.ts**
```ts
/**
* Description of this document.
*/
export enum ɵSomeEnum { ... }
```
**packages/common/public_api.ts**
```ts
import {ɵSomeEnum} from '@angular/core';
/**
* @alias core/ɵSomeEnum
*/
export const SomeEnum = ɵSomeEnum;
```
In the generated docs there will be a page for `common/SomeEnum`, which
will be rendered as an enum, rather than a const, showing the description
extracted from the `core/ɵSomeEnum`.
---
The implementation of this feature required some refactoring of the other
processing:
1. Previously `ɵ` prefixed exports were not even considered.
2. Due to 1. some processors needed to have guards added to ignore such
private exports (`addMetadataAliases` and `checkContentRules`).
3. The processing of package pages had to be reworked (and split) so that
it picked up the aliased export docs after their alias proeprties had
been copied.
See FW-1207, FW-632, #29249
PR Close#29673
Until the legacy job has been migrated to Bazel w/ Saucelabs, we
need to add the `render3` entry-point to the test SystemJS configuration
so that developers don't get inconsistent behavior between Bazel tests
and the legacy tests. e.g. https://circleci.com/gh/angular/angular/270102
PR Close#29675
Previously we had to share code between upgrade/dynamic and upgrade/static
by symlinking the `src` folder, which allowed both packages to access
the upgrade/common files.
These symlinks are always problematic on Windows, where we had to run
a script to re-link them, and restore them.
This change uses Bazel packages to share the `upgrade/common` code,
which avoids the need for symlinking the `src` folder.
Also, the Windows specific scripts that fixup the symlinks have also
been removed as there is no more need for them.
PR Close#29656
One of the tests introduced in #29601 is susceptible to a kind of
WebDriver flake related to trying to click elements hidden behind fixed
positioned elements.
This commit works around the issue by clicking the elements directly
using JavaScript (instead of `WebElement#click()`).
PR Close#29641
--watchfs is causing the build to be flaky on Windows because Bazel
doesn't have proper support for watchfs on Windows, but it doesn't seem
to bring much performance on Linux, either.
Fixes: https://github.com/angular/angular/issues/29541
PR Close#29635
Prior to this change, if a navigation was ongoing and a new one came in, the router could get into a state where `router.currentNavigation` was `null` even though a navigation was executing. This change moves where we set the `currentNavigation` value so it's inside a `switchMap`. This solves the problem because the `finally` on the `switchMap` had been setting `currentNavigation` to `null` but the new `currentNavigation` value would have already been set. Essentially this was a timing problem and is resolved with this change.
Fixes#29389#29590
PR Close#29636
Previously, if the shape of data in `contributors.json` was incorrect,
there would be a runtime error (when trying to parse the data), which
would result in a blank page. The likelihood for this happening is
higher after #29553, where the shape of data changed.
This commit adds some basic e2e tests that verify the page works as
expected and there are contributors listed.
PR Close#29601
Sometimes (especially on mobile browsers on SauceLabs) the script may
fail to load due to a temporary issue with the internet connection. To
avoid flakes on CI when this happens, we retry the download after some
delay.
Related to #28578.
PR Close#29603
PhantomJS is [not being developed any more][1] and with modern
alternatives (such as Chrome headless) there is no reason to keep it as
a dependency.
[1]: https://github.com/ariya/phantomjs/issues/15344
PR Close#29611
Now that "Collaborators" is a separate group in the contributors page,
having "Angular Collaborators" as the heading of the page (which also
contains the "Angular" and "GDE" groups) is confusing.
Changing the title to "Angular Contributors" to avoid confusion.
PR Close#29553
The name of the group also serves as the group tab's title in the docs
app and having "Collaborator" (singular) as a title for a list of people
didn't read well.
Changing th group name (and thus tab title) to "Collaborators" (plural).
PR Close#29553
When an anchor scroll happens, we run document.querySelector. This value can be taken directly from the user. Therefore it's possible to throw an error on scrolling, which can cause the application to fail.
This PR escapes the selector before using it.
Related to #28193
[Internal discussion](https://groups.google.com/a/google.com/forum/#!topic/angular-users/d82GHfmRKLc)
PR Close#29577
When I tried one of the examples provided in the documention, encountered the " Can't bind to 'ngModel' since it isn't a known property of 'select' ” error. So to resolve it I imported the FormsModule in ngModule. If it is mentioned in the documentation, it would be handy for the beginners to try and learn. Thanks for considering.
Duplicate of pull Request# 29206, As I encountered few issues after multiple authors corrected, So I am creating the new pull request
PR Close#29522
PR #28930 was originally only merged into master. Later is was
backported to the patch branch as 34395ae, but some changes were missed.
This commit backports the missing bits to get the contributors and
related infrastructure in sync with master. This makes it easier to
backport future changes.
PR Close#29584
* build: use cross platform workspace_status_command
* build: add pre-release check that validates the version name
Currently with the release of "8.0.0-beta.10", the Bazel npm packag accidentally
was stamped with an incorrect version placeholder: `8.0.0-beta.10+1.sha-a28b3e3`.
This can happen because the placeholder is based on latest tag that matches the
Semver format. e.g. if `HEAD` equals to the commit that has the latest tag, the
version name will be correct and refer to the tag name (e.g. `8.0.0-beta.10`). Though
if the latest commit is not tagged with the most recent tag, the version
name will also include the SHA of the commit (e.g. `8.0.0-beta.10+1.sha-a28b3e3`).
We can ensure that we don't accidentally release versions from a more recent commit
that shouldn't be part of the release by adding a pre-release check that ensures that
the `BUILD_SCM_VERSION` Bazel status variable matches the expected version format.
With 0f1da49b86, the Chrome beta job has
been disabled because a new Chrome beta has been released, but Saucelabs
didn't support a chromedriver that is compatible with that given beta version.
Now the topic of pinning these external browsers to a specific version came up. In order to make the build less prone to unexpected new versions, we need to
_permanently_ disable the Chrome beta browser. Otherwise pinning `SL_CHROME`
to a specific version does not statisfy the requirement of making the CI jobs
more deterministic.
See original discussion: https://github.com/angular/angular/pull/29518#discussion_r269140676
Chrome can be pinned to Chrome v73 (latest stable version at time of this commit)
Firefox can be pinned to Firefox v65 (latest stable version available in Saucelabs platform)
PR Close#29529
clarify scrollPositionRestoration enabled to fully describe the functionality it provides. refactor app module example to compile and remove dependency on unnecessary framework. Remove component example due to bug on reload.
PR Close#29260
With 093dc915ae9ad92a3baa602eb7cb7862ca4b6734, Firefox has been updated
to the latest available version within Saucelabs. Firefox added shadow DOM support
in Firefox 63 and therefore the shadow dom test in `platform-browser` now runs as well.
This test currently fails because Firefox does not support computed style property
shorthands. In order to make this test work on Firefox now, we just switch from `border`
to `background` (because of the overhead when comparing each `top`, `bottom`, `left`, `right`-border properties)
PR Close#29518
We need to temporarily disable Chrome beta within the
`legacy-saucelabs-tests` and `test_saucelabs_bazel` job.
This is necessary because Saucelabs added Chrome v74 to their
beta version channel without providing the corresponding
chromedriver that is *required* for that beta version.
Explicitly specifying a chromedriver within the Selenium browser
capabilities doesn't seem to work because Saucelabs seems to mirror
their supported chromedriver versions. Meaning that we can't explicitly
use chromedriver.storage.googleapis.com/index.html?path=74.0.3729.6/
Re-enabling tracked with: FW-1205
PR Close#29518
provide the command for running all test suites
- don't make new contributors read the whole Bazel doc
add info about ClangFormatIJ plugin for IntelliJ
add info about Bazel plugin for IntelliJ
fix inconsistent casing of GitHub
PR Close#29048
This reverts commit efcd6af17d.
Engineers on the team thought that the red color means something is
broken.
See slack discussion in #general
PR Close#29419
Recently the bazelrc configuration in the patch branch
has been accidentally overwritten. In order to keep
patch and master in sync, we need to revert that small
change in the patch branch.
PR Close#29312
Currently if an Angular library has multiple unnamed module re-exports, NGC will
generate incorrect metdata if the project is using the flat-module bundle option.
e.g.
_public-api.ts_
```ts
export * from '@mypkg/secondary1';
export * from '@mypkg/secondary2';
```
There are clearly two unnamed re-exports in the `public-api.ts` file. NGC right now
accidentally overwrites all previous re-exports with the last one. Resulting in the
generated metadata only containing a reference to `@mypkg/secondary2`.
This is problematic as it is common for primary library entry-points to have
multiple re-exports (e.g. Material re-exporting all public symbols; or flex-layout
exporting all public symbols from their secondary entry-points).
Currently Angular Material works around this issue by manually creating
a metadata file that declares the re-exports from all unnamed re-exports.
(see: https://github.com/angular/material2/blob/master/tools/package-tools/build-release.ts#L78-L85)
This workaround works fine currently, but is no longer easily integrated when
building the package output with Bazel. In order to be able to build such
libraries with Bazel (Material/flex-layout), we need to make sure that NGC
generates the proper flat-module metadata bundle.
PR Close#29360
remove reference to npm
remove confusing optional comments and $(yarn bin) with missing /
remove reference to protractor commands which don't exist
provide yarn commands which don't require gulp installed globally
PR Close#29044
The instructions lead you to think you run this step before setting
up your locale. The command is mentioned further in the guide after
setup is complete.
Closes#26052
PR Close#29313
Currently the project `bazelrc` file imports a user bazelrc if present. This
has been added in order to allow user-specific Bazel configuration settings
when working within the Angular project. Since we currently import that
user configuration before setting the project-specific settings, it's not
possible for developers to overwrite given options (e.g. the `symlink_prefix`).
Moving the import to the end of the file solves that problem.
PR Close#29279
Recently we moved the Saucelabs job into a cronjob in order to avoid
heavy flakiness that we experienced due to a Saucelabs connect bug
that has been supposedly fixed by the Saucelabs team (no new version
is released yet though).
Our initial assumption was that we very rarely hit specific browser failures
and can therefore move the Saucelabs tests into a cronjob, but after some
days of having the cronjob, we realized that we actually hit browser-specific
failures quite often and that we should run the tests for every PR (like before)
PR Close#29270
It is useful for manually checking that all guides/examples/images have
owners in `.github/CODEOWNERS`, but is not used for automatic
verification (e.g. on CI) for now.
PR Close#29172
Currently when building AIO with Ivy, we run Ngcc and transform
all found formats. This potentially slows down the build (and
therefore the "test_aio_local_ivy" job). Since it's not necessary
to build all formats, and we only need "fesm5" and "fesm2015",
we can explicitly specify the required formats.
**Note**: Currently this does not have any big effect, because Angular
Material does not ship ES2015/ES5 files. The change primarily just
suppresses the Ngcc messages for Material not providing ES2015/ES5
entry-points.
Technically if new non-Ivy packages are added to AIO, this
speeds up the build as we don't build the unused formats.
PR Close#29122
Currently the "test_docs_examples_ivy" job attaches
the legacy package output, while we can also attach
the Ivy NPM package output. We don't need Ngcc to downlevel
the Angular packages in order to build AIO with Ivy.
PR Close#29122
* Use exclusively `TeamComponent` class for examples, as currently there are at least 3 different component classes being used, one of which is actually as a type argument for a `Resolve<T>` implementation.
PR Close#29093
Previously, if an app version contained the same files as an older
version (e.g. making a change, then rolling it back), the SW would not
detect it as the latest version (and update clients).
This commit fixes it by adding a `timestamp` field in `ngsw.json`, which
makes each build unique (with sufficiently high probability).
Fixes#24338
PR Close#26006
Currently when `sauce-connect` times out after 2min, we just
print a message saying that the SauceLabs tunnel didn't establish
within 2min. In order to make debugging easier, we now print the
full log file output on failure.
PR Close#29105
When we added the strict null checks, the lexer had some `!`
operators added to prevent the compilation from failing.
This commit resolves this problem correctly and removes the
hacks.
Also the comment
```
// Note: this is always lowercase!
```
has been removed as it is no longer true.
See #24571
PR Close#28055
PR Close#28736
This commit consolidates the options that can modify the
parsing of text (e.g. HTML, Angular templates, CSS, i18n)
into an AST for further processing into a single `options`
hash.
This makes the code cleaner and more readable, but also
enables us to support further options to parsing without
triggering wide ranging changes to code that should not
be affected by these new options. Specifically, it will let
us pass information about the placement of a template
that is being parsed in its containing file, which is essential
for accurate SourceMap processing.
PR Close#28055
PR Close#28736
As a side effect of 09b34bae8655d4251516655c317b150c46cd3653,
we fixed that the docs systemjs examples currently do not run
with Ivy in JIT mode. This now uncovered new failures with the JIT
resource loading. e.g.
```
zone.js:665 Unhandled Promise rejection: Component 'PhoneListComponent' is not resolved:
- templateUrl: ./phone-list.template.html
Did you run and wait for 'resolveComponentResources()'? ; Zone: <root> ; Task: Promise.then ; Value: Error: Component 'PhoneListComponent' is not resolved:
- templateUrl: ./phone-list.template.html
Did you run and wait for 'resolveComponentResources()'?
at Function.get (directive.ts:54)
at getComponentDef (definition.ts:648)
at verifyDeclarationsHaveDefinitions (module.ts:185)
at Array.forEach (<anonymous>)
at verifySemanticsOfNgModuleDef (module.ts:159)
at Function.get (module.ts:132)
at getInjectorDef (defs.ts:181)
at R3Injector.processInjectorType (r3_injector.ts:230)
at eval (r3_injector.ts:114)
at eval (r3_injector.ts:451) Error: Component 'PhoneListComponent' is not resolved:
```
We temporarily disable these two failing SystemJS examples by adding them to the
`fixmeIvyExamples` list.
PR Close#29046
Currently the docs example tests (`test_docs_examples_ivy`
and `test_docs_examples`) are the culprits for a slow-down
in our overall CI turnaround. We need to increase parallelism
in order to make our CI turnaround more _acceptable_. This is
temporary and the long-term goal is to move these tests to Bazel
with remote build execution.
References #28940
PR Close#29046
Currently the "test_docs_examples_ivy" job attaches
the legacy package output, while we can also attach
the Ivy NPM package output. We don't need Ngcc to downlevel
the Angular packages in order to run the docs examples with Ivy.
PR Close#29046
Currently when adding the example boilerplate to all
examples with Ivy enabled, we run Ngcc and transform
all found formats. This potentially slows down the build and
is not necessary as we only need the "fesm5" and "fesm2015" bundles.
PR Close#29046
This change helps highlight certain misoptimizations with Closure
compiler. It is also stylistically preferable to consistently use index
access on index sig types.
Roughly, when one sees '.foo' they know it is always checked for typos
in the prop name by the type system (unless 'any'), while "['foo']" is
always not.
Once all angular repos are conforming this will become a tsetse.info
check, enforced by bazel.
PR Close#28937
Previously, the VSCode settings for the workspace specified the
`clang-format.executable` setting to configure auto-formatting to use
`clang-format`. Yet, this setting has no effect without the extension
that provides that configuration option namely [xaver.clang-format][1]).
For people that didn't have the extension installed, VSCode would use
the default formatters, resulting in vastly different file fomatting.
This commit adds a set of [rcommended workspace extensions][2], to help
people get the right extensions when checking out the repository.
The recommended extensions are:
- [gkalpak.aio-docs-utils][3]:
Utilities to aid in authoring/viewing Angular documentation source
code. Currently, mainly aid in working with
`{@example}`/`<code-example>` tags.
- [ms-vscode.vscode-typescript-tslint-plugin][4]:
Add auto-linting for TS files using `tslint` while editing.
- [xaver.clang-format][1]:
Add auto-formatting for JS/TS files using `clang-format`.
[1]: https://marketplace.visualstudio.com/items?itemName=xaver.clang-format
[2]: http://go.microsoft.com/fwlink/?LinkId=827846
[3]: https://marketplace.visualstudio.com/items?itemName=gkalpak.aio-docs-utils
[4]: https://marketplace.visualstudio.com/items?itemName=ms-vscode.vscode-typescript-tslint-plugin
PR Close#28784
Previously, auto-formatting on save was enabled for all file types,
which meant also using default VSCode formatting settings for files
where this was not desirable - for example HTML files (such as
angular.io and docs examples templates) and JSON files (such as Firebase
configurations).
This was problematic for the following reasons:
- Unlike with JS/TS files, the formatting of other file types is not
checked/enforced on CI.
- Formatting is subject to default VSCode settings and everyone's local
VSCode settings overrides.
- Especially for docs examples files, changing the layout might require
updating the wording in corresponding guides (e.g. when referring to
line-numbers).
If we decide that we do want to lint those other file types as well
(which sounds like a good idea), we should do it in a way that ensures
consistent formatting and check the formatting on CI.
PR Close#28784
When web-animations and/or CSS keyframes are used for animations certain
CSS style values (such as `display` and `position`) may be ignored by a
keyframe-based animation. Angular should special-case these styles to
ensure that they get applied as inline styles throughout the duration of
the animation.
Closes#24923Closes#25635
Jira Issue: FW-1091
Jira Issue: FW-1092
PR Close#28911
In the past, the sanitizer would remove unsafe elements, but still
traverse and sanitize (and potentially preserve) their content. This was
problematic in the case of `<style></style>` tags, whose content would
be converted to HTML text nodes.
In order to fix this, the sanitizer's behavior was changed in #25879 to
ignore the content of _all_ unsafe elements. While this fixed the
problem with `<style></style>` tags, it unnecessarily removed the
contents for _any_ unsafe element. This was an unneeded breaking change.
This commit partially restores the old sanitizer behavior (namely
traversing content of unsafe elements), but introduces a list of
elements whose content should not be traversed if the elements
themselves are considered unsafe. Currently, this list contains `style`,
`script` and `template`.
Related to #25879 and #26007.
Fixes#28427
PR Close#28804
If an interface is not exported publicly from its package, then the doc-gen
does not see it, and so cannot include it in the generated documentation.
This was the case for a number of `...Decorator` interfaces, such as
`PipeDecorator` and `InputDecorator.
This commit adds these interfaces to the public export to fix this problem.
PR Close#28836
PR Close#28961
* build_bazel_rules_typescript renamed to npm_bazel_typescript
* build_bazel_rules_karma renamed to npm_bazel_karma
* browser_repositories.bzl removed and now using @npm_bazel_karma//:browser_repositories.bzl
* includes some fixes for future ts_library devmode es2015 support but some failure still remain when devmode is es2015 so this PR keeps it as es5 using the bazelOptions.devmodeTargetOverride tsconfig setting
PR Close#28896
This PR fixes a bug in autocompletion for @Input/@Output decorator with
an alias. The current implementation ignores the alias.
Credit for this work is attributed to @edgardmessias
The original work fixed the bug, but was lacking test.
PR Close#27959
PR Close#28904
Initially when we introduced the cronjob for Saucelabs,
we specified that the tests should run every 4h. Since the
caretaker needs more recent results when merging PRs
or before creating a release, we should run the saucelabs
tests every hour. This still ensures that PRs are not
affected by Saucelabs flakiness or incidents, and
the caretaker can also react better to real browser
failures (and isn't blocked on a 4h time frame)
PR Close#28903
Previously, our yarn (which overwrote the pre-installed yarn on the
docker image) was only available through `$BASH_ENV` (as an exported
function). This caused it to be undefined for commands executed in other
shells (e.g. via Node.js' `child_process.spawn()` unless explicitly
configuring it to run with `bash`).
This commit fixes this by making our yarn version available globally via
a symlink (`/usr/local/bin/yarn`).
(This was accidentally broken in #28839.)
PR Close#28889
We no longer want to run Saucelabs for every PR/commit because
Saucelabs has been very flaky recently and it blocks most of the
PRs with a flaky failing state that we cannot fix most of the time due
to upstream Saucelabs failures/incidents. Since real browsers tests
rarely catch browser-specific failures (same as in Material), we should
only run Saucelabs in a cronjob on the upstream branches. This still
ensures/guarantees our browser compatibility, but makes our CI
more stable and the PR workflow more productive.
PR Close#28787
Since all unit tests are now run with Bazel, we can remove
the local legacy unit tests job. We still need to keep the
Saucelabs legacy job until we can run all of these web
unit tests with Saucelabs and Bazel.
PR Close#28703
With #28402 we updated the `examples` package to be
built and tested with Bazel. This PR was only intended
for the e2e integration tests, and there still seem to be
a few unit tests that need to be migrated to Bazel until
we can remove the legacy local unit tests job.
PR Close#28703
The supposedly visually hidden `mat-icon` creates unnecessary space at
the bottom of the page (below the footer) in recent Chrome versions.
This didn't happen before and it still doesn't happen in other browsers
(Firefox, Edge, IE).
This commit fixes it by wrapping the icon in a visually hidden `div`
container, which doesn't have other styles (such as `mat-icon` does)
that could affect the layout of the page.
Fixes#28858
PR Close#28864
The `setUpLocationSync` function in @angular/router/upgrade didn't previously let you sync hash-based navigations. With this change, you can now pass an option to `setUpLocationSync` that will make sure location changes run in Angular in hash-based apps.
Fixes#24429#21995
PR Close#28609
This should be `ngsw.json` not `ngsw-config.json` as the latter is only the src file that gets then compiled into the `ngsw.json` and placed into the `dist` folder
PR Close#28832
Currently if developers use call expressions in their static
class members ([like we do in Angular](https://github.com/angular/angular/blob/master/packages/core/src/change_detection/differs/keyvalue_differs.ts#L121)),
the metadata that is generated for flat modules is invalid. This
is because the metadata bundler logic currently does not handle
call expressions in static class members and the symbol references
are not rewritten to avoid relative paths in the bundle.
Static class members using a call expression are not relevant for
the ViewEngine AOT compilation, but it is problematic that the
bundled metadata references modules using their original relative
path. This means that the bundled metadata is no longer encapsulated
and depends on other emitted files to be emitted in the proper place.
These incorrect relative paths can now cause issues where NGC
looks for the referenced symbols in the incorrect path. e.g.
```
src/
| lib/
| index.ts -> References the call expression using `../../di`
```
Now the metadata looks like that:
```
node_modules/
| @angular/
-- | core/
-- -- | core.metadata.json -> Says that the call expr. is in `../../di`.
| di/
```
Now if NGC tries to use the metadata files and create the summary files,
NGC resolves the call expression to the `node_modules/di` module. Since
the "unexpected" module does not contain the desired symbol, NGC will
error out.
We should fix this by ensuring that we don't ship corrupted metadata
to NPM which contains relative references that can cause such
failures (other imports can be affected as well; it depends on what
modules the developer has installed and how we import our call
expressions).
Fixes#28741.
PR Close#28762
In the TRIAGE_AND_LABELS doc, it was not clear that the merge label
may be applied by the author before the PR is green (as a sort of
auto-submit). After the label is applied, it is still up to the
caretaker to determine that the PR is acceptable before merging.
This commit adds that clarification.
PR Close#28837
As discussed in https://github.com/angular/angular/pull/28546#discussion_r254068014, we want to combine the
`define_env_vars` and `download_yarn` anchor since downloading Yarn depends on setting up the
environment variables. In addition this simplifies our setup and reduces code-duplication.
PR Close#28788
Previously, the `validate-commit-message` gulp task was using the
`git log ... ^r1 r2` syntax to list commits between the base branch and
the current head. This didn't work as expected on Windows, because `^`
is the escape character. As a result, the command was equivalent to
`git log ... r1 r2` on Windows, which essentially logs all commits
reachable from either `r1` or `r2`.
This commit fixes it by switching to git's
[double-dot range notation][1] (`r1..r2`), which is an alias for the
`^r1 r2` syntax and works correctly on all platforms.
[1]: https://git-scm.com/docs/gitrevisions#_dotted_range_notationsFixes#16830
PR Close#28780
Stop execution when an error happens in `validate-commit-message` gulp
task and ensure the error message is printed at the bottom.
Fixes#16829
PR Close#28780
Updating the doc to add the beginning label.
I'm not sure if this was the way it was intended, but it looked strange with just an ending </label> tag.
PR Close#28602
* build: switch example e2e tests to bazel
* No longer builds the example e2e tests using "tsc". The examples are now built with Bazel and can therefore be built with Ivy by using the `--define=compile=aot` switch.
* No longer runs the example e2e tests using the protractor CLI. example e2e tests are executed with the Bazel protractor rule and can therefore run incrementally.
* test: disable failing ivy example e2e tests
*Note for patch branch:* We had to disable more examples in Ivy because
the patch branch does not contain all Ivy/ngtsc fixes.
Since we build and publish the individual packages
using Bazel and `build.sh` has been removed, we can
safely remove the `rollup.config.js` files which are no
longer needed because the `ng_package` bazel rule
automatically handles the rollup settings and globals.
PR Close#28646
* ci(docs-infra): run docs examples tests in production mode (#28592)
PR Close#28592
* docs: remove quickstart example and copy tsconfig.1.json into TS config guide (#28592)
This example has long been replaced by the cli-quickstart, but was never deleted.
PR Close#28592
* docs: enable E2E test for setup example (#28592)
This guide is not being shown publicly, and its test is currently being ignored.
Instead of deleting this test and guide, it may be repurposed in the future for a local development guide.
PR Close#28592
* docs: ignore progression filenames from compilation (#28592)
PR Close#28592
* docs: remove unused StringSafeDatePipe from AngularJS Quick Ref example (#28592)
PR Close#28592
* docs: make parent finder functions compatible with AoT (#28592)
PR Close#28592
* docs: make toggleImage arguments optional in AngularJS quick reference (#28592)
PR Close#28592
* docs: add insert remove component to AppModule for animations example (#28592)
PR Close#28592
* docs: ignore component for app compilation for displaying data example (#28592)
PR Close#28592
* docs: ignore files from app compilation for ngmodule-faq example (#28592)
PR Close#28592
* docs: ignore initial components for app compilation in router example (#28592)
PR Close#28592
* docs: remove unused files in styleguide example (#28592)
PR Close#28592
* docs: make method arguments optional in template syntax example (#28592)
PR Close#28592
* docs: add more files to be ignored during app compilation (#28592)
PR Close#28592
* docs: run component-interaction and DI in JiT mode (#28592)
PR Close#28592
* docs: re-enable E2E tests for Http guide (#28592)
PR Close#28592
* ci(docs-infra): test docs examples with Ivy (#28463)
PR Close#28463
* fix(docs-infra): add progression files to exclude list for docs examples (#28650)
Also disables Http guide under Ivy tests with documented error
PR Close#28650
* fix(docs-infra): fix filtering in run-example-e2e.js (#28663)
PR Close#28663
* test(ivy): enable more docs examples e2e tests (#28688)
PR Close#28688
The web_worker images example is currently not really usable
because the rendered button that can be used to upload
an "image" to the demo is currently not working. This is because
the HTML markup for the `file-field` is not matching what `materialize-css`
expects. See: https://materializecss.com/text-inputs.html
PR Close#28562
Currently all playground examples are built with NGC, and most
of the HTML resources are automatically inlined. Surprisingly NGC
is able to resolve the relative component assets even though these
aren't specified in the `assets`. This seems to work because NGC
resolves the files in the execroot where the files are present
(if Bazel doesn't use sandboxing).
Issue is tracked with TOOL-667
PR Close#28562
The `web_workers/images` example is not being tested by any e2e
spec and therefore it's technically not necessary to fix that it uses
external resources, though in order to ensure that the Bazel builds
are hermetic and that we can eventually add e2e specs for the
web_worker/image example, we should avoid any use of external
resources.
We remove the `web-animations` polyfill in the `web_workers/animations`
example because we should try to vendor as few as possible deps. Also
the animations API is already supported by browsers we run the e2e tests
against (note here: `web_workers/animations` is currently also disabled)
PR Close#28562
* Updates the instructions on how to run the benchmark tests.
* Removes the unused `favicon.ico` file and the corresponding Bazel filegroup
PR Close#28697
Currently the "routing" playground example fails the e2e tests
because it tries to load the OpenSans font using an external
HTTP request. External http requests are not allowed (unless
explicitly enabled) within Bazel in order to ensure that
all targets are built and tested in a hermetic way.
In order to work around this issue in a Bazel idiomatic way,
we just vendor the fonts in the "third_party" folder. Note
that we can technically also enable internet for the RBE
host platform, but it's not a best practice for hermeticity.
The following syntax would allow us to enable internet for
RBE (stated here for tracking)
```
properties: {
name: "dockerNetwork"
value: "standard"
}
```
PR Close#28697
With ed1ba88ffd9d0fc266808413fa517e7a31943bc8 we switched the
examples to run with Bazel. This means that we can now also run the
e2e tests for these examples against Ivy. All playground e2e tests,
**except** the `web_worker` examples, successfully run with Ivy.
The failing webworker e2e tests have been temporarily disabled with
`fixmeIvy` and need to be investigated in a follow-up.
PR Close#28697
The `upgrade` playground example has been disabled for a
long time because Protractor initially didn't support running
hybrid apps. Now that we use a more recent version of Protractor
that handles hybrid apps (also automatically), we can re-enable
this long-standing disabled test.
Additionally the e2e test logic was outdated and failed because a
CSS selector did not match the template of the upgrade example.
With this change, the CSS selector has been updated to match the
example's template, and also the test has been updated slightly
to also ensure that content projection works.
PR Close#28697
Currently when someone serves the "person_management" playground
example, there will be runtime exceptions by `@angular/forms` if
someone clicks on one of the two buttons rendered in the example.
This happens because the example is outdated and the input elements
using `ngModel` do not specify a proper "name" while being inside of
a `<form>` element. A name is required inside of a form. The failure
is not specific to Ivy and is not covered by any test because the e2e
tests for this example are just asserting that the page properly loads
(the error only shows up one of the buttons has been clicked)
This is the reason why these errors were never visibile to the e2e tests.
Though in order to make this example work, we should this fix these failures
so that the example can work as expected.
```
FullNameComponent.html:7 ERROR Error: If ngModel is used within a form tag, either the name attribute must be set or the form
control must be defined as 'standalone' in ngModelOptions.
Example 1: <input [(ngModel)]="person.firstName" name="first">
Example 2: <input [(ngModel)]="person.firstName" [ngModelOptions]="{standalone: true}">
at Function.TemplateDrivenErrors.missingNameException (template_driven_errors.ts:40)
at NgModel._checkName (ng_model.ts:319)
at NgModel._checkForErrors (ng_model.ts:302)
at NgModel.ngOnChanges (ng_model.ts:215)
at Object.checkAndUpdateDirectiveInline (provider.ts:208)
at checkAndUpdateNodeInline (view.ts:429)
at checkAndUpdateNode (view.ts:389)
at debugCheckAndUpdateNode (services.ts:431)
at debugCheckDirectivesFn (services.ts:392)
at Object.eval [as updateDirectives] (FullNameComponent.html:7)
```
PR Close#28697
Currently all playground examples are built with `tsc`
and served with the `gulp serve` task. In order to be able
to test these examples easily with Ivy, we now build and
serve the examples using Bazel. This allows us to expand our
Ivy test coverage and additionally it allows us to move forward
with the overall Bazel migration. Building & serving individual
examples is now very easy and doesn't involve building everything
inside of `/modules`.
PR Close#28697
Currently we depend on the "rules_webtesting" version that is
installed by "rules_typescript//:package.bzl". This version of
the webtesting rules comes with a very old version of Chromium
and the `chromedriver` that does not support capturing console
errors properly (with stack traces). Since we have a few e2e
tests that depend on console output (e.g. playground/src/source-map),
we need to make sure that these tests can pass upon Bazel
migration.
**Note for patch version**: Technically this commit is no longer updating
the `rules_webtesting` version because a different PR/commit already updated
the version transitively in `master & patch` and reverted 0094b99176264b27582ab620565632788cab66c5
partially, so in order to keep master and patch in sync, we should not update the
version of `rules_webtesting`.
PR Close#28697
We currently face a lot of flakiness with our
Saucelabs CI jobs. These randomly exceed the 10min
CircleCI no-output limit because something throws
off `sauce-connect` in a long-lasting loop where
it tries to connect to some of their Saucelabs
servers. The initial assumption from the Saucelabs
team was that we might have some invalid firewall
rules, but this does not answer why this happens
_randomly_, so the latest update from the support
is that there have been some changes in the latest
version of `sauce-connect` version that **could**
cause this flakiness.
I've manually did multiple test runs and was only
able to reproduce the issues with v4.5.3 (latest
version), so it might be worth downgrading to
v4.5.1. This is also what the Saucelabs support
proposed us to do (though it's not guaranteed that
v4.5.1 is unaffected by the same issue)
PR Close#28659
Currently external static symbols which are referenced by AOT
compiler generated code, will be re-exported in the corresponding
`.ngfactory` files.
This way of handling the symbol resolution has been introduced in
favor of avoding dynamically generated module dependencies. This
behavior therefore avoids any strict dependency failures.
Read more about a particular scenario here: https://github.com/angular/angular/issues/25644#issuecomment-458354439
Now with `ngtsc`, this behavior has changed since `ngtsc` just
introduces these module dependencies in order to properly reference
the external symbol from its original location (also eliminating the need
for factories). Similarly we should provide a way to use the same
behavior with `ngc` because the downside of using the re-exported symbol
resolution is that user-code transformations (e.g. the `ngInjectableDef`
metadata which is added to the user source code), can resolve external
symbols to previous factory symbol re-exports. This is a critical issue
because it means that the actual JIT code references factory files in order
to access external symbols. This means that the generated output cannot
shipped to NPM without shipping the referenced factory files.
A specific example has been reported here: https://github.com/angular/angular/issues/25644#issue-353554070
PR Close#28594
The "tree/polymer_leaves" benchmark has no benchmark tests, nor do we install
Polymer anywhere. Polymer was previously installed through `bower`, but since
we removed bower, there is no easy way to run this benchmark with Polymer.
Considering that there are no benchmark tests, nor we have an easy way to
install/vendor Polymer, we should just remove this benchmark app.
This is also based on the assumption that we want to remove the
Polymer benchmarks anyway: see: 8a05199fb9
PR Close#28568
Currently it's not possible to run the benchmark e2e tests with Bazel on Windows
because the logic that imports the `perf_util`'s is not using a proper Bazel script
manifest path. A script manifest path should not start with `./angular/`, but rather
with the workspace name (which is in our case `angular/`)
PR Close#28568
Currently we install `firebase-tools` manually in the
integration tests run script. This is problematic
because it means that we cannot cache `firebase-tools`
properly and Yarn might time out downloading this
dependency. We can safely move this to the top level
`package.json` since Bazel now has a `.bazelignore` and
since we have a cache that works for PRs (with fallback
caching).
Note that the `.bazelignore` is relevant here because
`firebase-tools` has been mainly moved to the bash
script because it broke some Bazel calls.
See 4f0cae0676.
PR Close#28615
It seems that in some cases (especially on CI), global state is not
cleaned up properly causing a specific test to fail.
See #28045 and #28181 for more context.
This PR restores the global state for the affected test. This partly
defeat the purpose of the test, but is better than having flakes on CI.
Fixes#28614
PR Close#28617
Somehow the current list ommits quite a few important targets. Especially the cla and google3.
This changes adds all the statuses that must always be present and green for this agregate state expised as "ci/angular: merge status" to be green.
PR Close#28613
FileType objects are deprecated. They are not required for specifying valid file types for rule attributes, a list of strings can be used instead.
PR Close#28583
When a UrlTree of root url was returned by a guard as a redirection, the
navigation was not processed. The issue came from the error handler which
incorrectly marked the router as already navigated.
Fixes#27845
PR Close#28271
Previously, `ng-packages-installer` would replace the version ranges for
all dependencies that were peer dependencies of an Angular package with
the version range used in the Angular package. This effectively meant
that the pinned version (from `yarn.lock`) for that dependency was
ignored (even if the pinned version satisfied the new version range).
This commit reduces non-determinism in CI jobs using the locally built
Angular packages by always using pinned versions of dependencies for
Angular package peer dependencies if possible.
For example, assuming the following versions for the RxJS dependency:
- **aio/package.json**: `rxjs: ^6.3.0`
- **aio/yarn.lock**: `rxjs@^6.3.0: 6.3.3`
- **@angular/core#peerDependencies**: `rxjs: ^6.0.0`
...the following versions would be used with `ng-packages-installer`:
- Before this commit:
- **aio/package.json**: `rxjs: ^6.0.0`
- **node_modules/rxjs/**: `6.4.0` (latest version satisfying `^6.0.0`)
- After this commit:
- **aio/package.json**: `rxjs: ^6.3.0`
- **node_modules/rxjs/**: `6.3.3` (because it satisfies `^6.0.0`)
PR Close#28510
`ng-packages-installer` can be used to replace Angular packages with
locally built ones (from `dist/packages-dist/`) along with their peer
dependencies.
Previously, in order to achieve this, `yarn install` was called with the
`--no-lockfile` option, which resulted in installing the latest versions
of all dependencies (including transitive ones) permitted by the
corresponding version ranges in `package.json` files. As a result, newly
released versions would be picked, resulting in unexpected,
non-deterministic breakages in CI.
This commit calls `yarn install` with the `--pure-lockfile` option
instead. As a result, only the Angular packages (for which the locally
built ones are used) and their peer dependencies are unpinned; the
pinned versions from `yarn.lock` are used for all other (direct and
transitive) dependencies.
While this does not eliminate non-determinism across builds, it
significantly reduces it.
PR Close#28510
Since b43f8bc7d, RxJS does not need to be patched any more in the
top-level `node_modules/`, so we don't need to special-case RxJS in
`ng-package-installer` and use `node_modules/rxjs/`.
PR Close#28510
The docs don't mention that the app will never be stable if a `setInterval` is running somewhere, and that it will prevent the servcie worker to be registered too.
PR Close#28102
Note that this allows Angular to depend on the entirety of the ES2015 API, not just our restricted subset.
This change is needed because our copy of the subset was out-of-date, and prevents us using ES2015 target in dev mode.
This is a subset of #27738
PR Close#28570
Previously, in order for the `aio_monitoring` failure notifications to
work, the steps up to `define_env_vars` should have succeeded. This
meant that any failures in earlier steps would not send notifications.
This commit fixes it by making the notification step independent of the
`define_env_vars` step.
PR Close#28555
In most cases, it doesn't make a difference, because the cache does
already exist and is not saved. In the few cases where the dependencies
change (and the cache needs to be updated), it makes more sense to save
the cache in the `build-npm-packages` job, because most jobs depend on
it and thus will be able to take advantage of the updated cache right
away.
This seems to be an oversight in b26ac1c22.
PR Close#28555
Currently our version of Yarn is installed through
the "circleci/node" docker image. This is problematic
because in order to be able to update Yarn, we always
need to update the docker image to a version that
comes with the desired Yarn version. Sometimes there
is no docker image with the desired latest Yarn version,
and therefore we cannot easily update the Yarn version.
Additionally updating the docker image also means that
we need to update our version of NodeJS, as well as the
version of `openssl` might have changed (meaning that
our encrypted credential files may not be decodable with
the new version of `openssl`)
PR Close#28546
Note that this fixes `compiler-cli` tests within `compiler-cli/test`,
but there seem to be remaining `ngcc` tests within `compiler-cli/src`
which aren't working on Windows. This is out-of-scope for this commit.
PR Close#28550
Currently the "ngtsc` testing helpers resolve the `fake_core` NPM
package using the `TEST_SRCDIR` variable. This is problematic on Windows
where Bazel runfiles are not symlinked into the runfiles directory.
In order to properly resolve the NPM Bazel tree artifact, we use the
`resolveTreeNpmArtifact` runfile helper that properly resolves the artifact
properly on all platforms.
PR Close#28550
In order to support running "compiler-cli" tests that use the "test_support.ts"
utilities on Windows with Bazel, we need to imporve the logic that resolves NPM
packages and symlinks them into a temporary directory.
A more Bazel idiomatic and windows compatible way of resolving Bazel runfiles
is to use the "RUNFILES_MANIFEST" if present. This ensures that the NPM
packages can be also symlinked on Windows, and tests can execute properly
on Windows. Read more about why this is needed here:
* https://github.com/bazelbuild/bazel/issues/3726#issue-257062364
PR Close#28550
Since we recently removed the `test.sh` script, and now run
all tests with Bazel, we can remove the unused logic that makes
compiler-cli tests pass in non-Bazel.
This cleans up the tests, and also makes it easier to write tests
without worrying about two ways of the Angular package output
(Bazel `ng_package` rules vs. old `build.sh` logic of building)
PR Close#28550
Since we recently removed the `test.sh` script, and now run all
tests with Bazel, we can remove the unused logic that makes language-service
tests pass in non-Bazel.
This cleans up the tests, and also makes it easier to write tests
without worrying about two ways of the Angular package output
(Bazel `ng_package` rules vs. old `build.sh` logic of building)
PR Close#28550
There is no debouncing when we store the scroll Position.
Currently, we have a message in the console after a while:
>Throttling history state changes to prevent the browser from hanging
see: https://bugs.chromium.org/p/chromium/issues/detail?id=786211 for more informations
PR Close#28368
Note that this allows Angular to depend on the entirety of the ES2015 API, not just our restricted subset.
This change is needed because our copy of the subset was out-of-date, and prevents us using ES2015 target in dev mode.
This is a subset of https://github.com/angular/angular/pull/27738
PR Close#28134
Occasionally, yarn's requests take more than 10 minutes to
complete/fail, by which time CircleCI jobs due to no output.
This commit works around the issue by periodically printing something to
stdout.
PR Close#28458
Previously all Bazel repositories were cached on CircleCI
because the `experimental_repository_cache` flag has been
specified and the given repository cache directory has been
included in the CircleCI cache storage.
The directory is currently still included in the CircleCI
cache storage, but the `--repository_cache` flag is no longer
specified, and the cache directory is basically empty all the
time. The flag seems to have been removed accidentally within
SHA c8b70ae8e4.
We should specifiy this flag on the CI again, so that Bazel
doesn't need to install the Bazel managed node modules
all the time. This would slow down analysis phase on CI; and also
makes us dependent on the Yarn/NPM registry which often times out
if we fetch a lot of dependencies.
Also in order to make sure that cached Bazel repositories are
also most of the time in sync with what's currently defined in
the workspace, we need to update the cache key.
PR Close#28515
Changes `gulp format` to format only changed lines by default
(`gulp format:changed`) and introduces a new task, `gulp format:all` to
format all source files. Since formatting only changed lines should be
the more common action, it makes more sense as the shorter default.
PR Close#28411
Currently whenever someone creates a pull request, the NPM dependencies
are downloaded and installed. This is problematic because we have a lot
NPM dependencies with potentially large files that would need to be
downloaded (e.g. the Bazel binaries).
The caches are currently not being restored because we added the
`{Branch}` variable to the CircleCI cache key. Since every PR has a different
branch name (e.g. `devversion/refs/heads/my-banch`), the cache keys would
never match an existing cache key, and the PR would start fresh by
downloading everything.
We can safely remove the `{Branch}` variable from the cache key because
it does not provide any value since the cached files are based on the state
of the `yarn.lock` file and not based on the current branch name. This reduces
our dependency on the slow and sometimes **flaky** Yarn registry. We should
try to depend as few as possible on external services (e.g. see how Saucelabs
flakiness can cause trouble for the caretaker; same applies to flaky Yarn installs)
PR Close#28480
By default, `webdriver-manager update` will download the latest
ChromeDriver version, which might not be compatible with the Chrome
version included in the [docker image used on CI], causing CI failures.
Previously, we used to pin the ChromeDriver version on CI in
[ngcontainer's Dockerfile][2]. This was accidentally broken in #26691,
while moving from ngcontainer to default CircleCI docker images.
This commit fixes the issue by pinning ChromeDriver to a known
compatible version.
[1]: bfd48d156d/.circleci/config.yml (L16)
[2]: bfd48d156d/tools/ngcontainer/Dockerfile (L63)
PR Close#28494
This commit fixes a bug in the Bazel builder in which the path to Bazel
executable is constructed using the project path. For non-default
project, the node_modules directory is actually one level above the
project path.
This PR fixes the bug by resolving node_modules with require.resolve().
It requires @bazel/bazel v0.22.1 because previous versions do not have
index.js or main field in package.json and would cause node module
resolution to fail.
This has been tested with both bazel and ibazel.
PR Close#28478
With the release of @angular/bazel v7.2.3, the npm install step right
after `ng new` installs this version. However there is a bug in the
builder which results in bazel executable not found.
This bug was not discovered before because the dependencies of the
project created by `ng new` are not pinned.
The fix is to pin the version of @angular/bazel to 7.2.2 which relies on
global installation of bazel.
PR Close#28460
## PR Checklist
Please check if your PR fulfills the following requirements:
* [x] The commit message follows our guidelines: https://github.com/angular/angular/blob/master/CONTRIBUTING.md#commit
* [ ] Tests for the changes have been added (for bug fixes / features)
* [x] Docs have been added / updated (for bug fixes / features)
## PR Type
What kind of change does this PR introduce?
* [ ] Bugfix
* [ ] Feature
* [ ] Code style update (formatting, local variables)
* [ ] Refactoring (no functional changes, no api changes)
* [ ] Build related changes
* [ ] CI related changes
* [x] Documentation content changes
* [ ] angular.io application / infrastructure changes
* [ ] Other... Please describe:
## What is the current behavior?
Issue Number: N/A
## What is the new behavior?
## Does this PR introduce a breaking change?
* [ ] Yes
* [x] No
## Other information
PR Close#28206
Adds the information that the templateUrl and styleUrls options supports only relative Urls.
Adds more information about relative paths and absolute URLs in project metadata.
PR Close#27962
Currently, when we navigate in the `CLI COMMANDS` section, the "hamburger button" isn't present because the class css `folder-cli` is missing.
This PR add this class in order to show this button when we are in this section.
PR Close#28418
* Improves the `compiler-cli/integrationtest` codegen output test slightly by using a more clear test description and by adding an assertion that ensures that decorators are downleveled.
PR Close#28191
* Fixes that the test logic for `ngtools` in the offline compiler test is no longer working due to being unmaintained for a long time
* Makes the path comparison logic platform agnostic, so that the tests can be also executed on Windows
PR Close#28191
* No longer builds the example e2e tests using "tsc". The examples are now built with Bazel and can therefore be built with Ivy by using the `--define=compile=aot` switch.
* No longer runs the example e2e tests using the protractor CLI. example e2e tests are executed with the Bazel protractor rule and can therefore run incrementally.
NOTE: Unit tests found within the examples are still running within the legacy jobs.
PR Close#28402
Builder for `@angular/bazel` schematics should not expect bazel/ibazel
to be on the PATH. It should instead invoke the local executable
installed by yarn/npm.
PR Close#28303
Users should be able to add Bazel workspace to an existing project.
The current approach assumes that the schematics is working on the same
tree as that of ng-new, which includes the top-level directory. Instead,
the schematic should work on the tree rooted at `appRoot` to enable
Bazel files to be added to existing project.
This change uses the newly implemented ScopedTree
a0ac4b0e3d
to achieve this.
NOTE: The version of `@angular-devkit/schematics` that is installed is
used to run the `@angular/bazel` schematic. Even if a different version
is used in the schematic itself, it has no effect.
Therefore, the *latest* Angular CLI should be used to generate the
files. As of this commit, the latest version is @angular/cli@7.3.0-rc.0
PR Close#28349
yarn install was disabled in ng-new for Bazel schematics because
Bazel manages its own node_modules dependencies and therefore
there is no need to install dependencies twice.
However, the first yarn install is needed for `ng` commands to work,
most notably `ng build`.
This commit restores the original behavior.
PR Close#28381
This ensures that the SW is cleaned up, even in cases where
synchronization is disabled (and thus the clean-up inside `goTo()`
happens without waiting for Angular).
PR Close#28290
For asynchronous callbacks, this can be done either by calling
`done.fail()` or by returning the promise directly (without requesting a
`done` callback). (Using the latter, because it is shorter.)
PR Close#28290
The value here is unimportant on initialization since it's not looked at until the second navigation. However, sometimes in testing the `Location` service is mocked out, or the Router constructor manually called. Assuming `Location` exists in the constructor leads to test failures in `google3` therefore we initialize to a value that will not cause errors.
PR Close#28376
Show top menu at 992px screen width. The JS expression was checking just for screen widths
strictly greater than 992px to show the menu, while the CSS media query was showing the hamburger
icon just for screen widths strictly smaller than 992px, so there was a gap of 1px that the user
could't navigate through the top menu.
closes#24324
PR Close#26418
The `.properties-table` selector does not match any element and the
styles don't look relevant for the similarly named `.property-table`
class.
PR Close#28104
animate functions now contain style functions instead of plain objects
e.g. animate(1s, { background: black }))
to animate(1s, style({ background: black }))
PR Close#28305
With #27680, a bug was fixed where multiple redirects using `eager` URL update could cause navigation to fail. However, that fix introduced a problem where with `skipLocationChange` enabled, the URL tree rendered was not properly stored for reference. This specifically caused an issue with named router outlets and subsequent navigations not being recognized.
This PR stores the correct `UrlTree` for reference with later navigations. It fixes the regression introdued with #27680.
Fixes#28200
PR Close#28301
With Node.js v10.14 and greater, running `yarn gulp format` produces
the following error:
```
$ nvm current
v10.15.0
$ yarn gulp format:changed
yarn run v1.12.3
$ /usr/local/google/home/kyliau/Documents/GitHub/angular/node_modules/.bin/gulp format:changed
internal/util/inspect.js:31
const types = internalBinding('types');
^
ReferenceError: internalBinding is not defined
at internal/util/inspect.js:31:15
at req_ (/usr/local/google/home/kyliau/Documents/GitHub/angular/node_modules/natives/index.js:137:5)
at require (/usr/local/google/home/kyliau/Documents/GitHub/angular/node_modules/natives/index.js:110:12)
at util.js:25:21
at req_ (/usr/local/google/home/kyliau/Documents/GitHub/angular/node_modules/natives/index.js:137:5)
at require (/usr/local/google/home/kyliau/Documents/GitHub/angular/node_modules/natives/index.js:110:12)
at fs.js:42:21
at req_ (/usr/local/google/home/kyliau/Documents/GitHub/angular/node_modules/natives/index.js:137:5)
at Object.req [as require] (/usr/local/google/home/kyliau/Documents/GitHub/angular/node_modules/natives/index.js:54:10)
at Object.<anonymous> (/usr/local/google/home/kyliau/Documents/GitHub/angular/node_modules/vinyl-fs/node_modules/graceful-fs/fs.js:1:99)
```
A search on GitHub reveals this issue is due to natives@1.1.4:
gulpjs/gulp#2246
```
$ yarn why natives
yarn why v1.12.3
[1/4] Why do we have the module "natives"...?
[2/4] Initialising dependency graph...
[3/4] Finding dependency...
[4/4] Calculating file sizes...
=> Found "natives@1.1.6"
info Reasons this module exists
- "gulp#vinyl-fs#graceful-fs" depends on it
- Hoisted from "gulp#vinyl-fs#graceful-fs#natives"
- Hoisted from "browserstacktunnel-wrapper#unzip#fstream#graceful-fs#natives"
```
The solution is to add a manual resolution for natives@1.1.6
PR Close#28213
Adds a check to verify that each PR branch to be merged upstream contains SHAs of commits that significantly changed our CI infrastructure.
This check is used to enforce that we don't merge PRs that have not been rebased recently and could result in merging of non-approved or otherwise bad changes.
PR Close#28250
Users might have run the CSS Preprocessor tool *before* the Angular
compiler. For example, we do it that way under Bazel. This means that
the design-time reference is different from the compile-time one - the
input to the Angular compiler is a plain .css file.
We assume that the preprocessor does a trivial 1:1 mapping using the same
basename with a different extension.
PR Close#28166
The current build workflow depends on cross workspace dependency by
installing angular-cli as a Bazel repository. This is not ideal because
it introduces separate node_module directories other than the one
installed by Angular through the yarn_install rule (ngdeps).
This commit removes angular-cli from the Bazel workspace and installs
rollup and @angular-devkit/build-optimizer locally.
PR Close#28215
Right now, we post such comments whenever a file has been touched that
could potentially have affected the docs. Since the API docs are built
from comments in the source code, almost all non-docs changes are
generating such preview comments, even though most of the time they are
irrelevant to the author and create unnecessary noise on the PR
(especially for actively worked-on PRs).
This commit removes the `team` GitHub team from the list of teams whose
members will automatically get preview comments.
(Adding the `aio: preview` label would still work on any PR.)
Jira: FW-967
PR Close#28211
A few integration tests now depend on @angular/cli.
This commit changes the affected tests to use the dependency
on @angular/cli defined at root package.json.
PR Close#28139
The integration test for bazel-schematics installs Angular in
two different locations:
1. Bazel workspace
2. package.json -> fetched from npm
Pull request #28142 changes the test to always install (1) from
source. This breaks when there's a major version bump since the
versions locally and the version in package.json no longer match.
This change updates package.json to fetch @angular/* packages
locally as well.
PR Close#28194
At the moment, paths stored in `maps` are not normalized and in Windows is causing files not to be found when enabling factory shimming.
For example, the map contents will be
```
Map {
'C:\\git\\cli-repos\\ng-factory-shims\\index.ngfactory.ts' => 'C:\\git\\cli-repos\\ng-factory-shims\\index.ts' }
```
However, ts compiler normalized the paths and is causing;
```
error TS6053: File 'C:/git/cli-repos/ng-factory-shims/index.ngfactory.ts' not found.
error TS6053: File 'C:/git/cli-repos/ng-factory-shims/index.ngsummary.ts' not found.
```
The changes normalized the paths that are stored within the factory and summary maps.
PR Close#28173
Right now the `ServerRendererFactory2` creates a new instance of the
`DomElementSchemaRegistry` for each and every request, which is quite
costly (for the Tour of Heroes SSR this takes around **30%** of the
overall execution time). Since the schema is never modified, but only
used in a read-only fashion, it should be possible to re-use a single
instance instead.
Naive performance testing with 100 concurrent connections and 1000
requests in total shows an approximate **33%** improvement in Req/Sec
on the Tour of Heroes SSR example.
PR Close#28150
PR Close#28151
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27680
The current integration test for Bazel schematics downloads a
published version of Angular as required by the http_archive
rule in the CLI created WORKSPACE.
However, this makes the test less useful because it does not
actually test any changes to the Angular repo at source.
This PR replaces the http_archive method in the WORSPACE
with local_repository so that any local changes to the Angular
repo are tested accordingly.
With Typescript 3.2, the file e2e/src/app.po.ts generated by CLI
no longer compiles under Bazel due to missing type annotations.
A temporary file is placed in the integration/bazel-schematics
directory while the change is pending in CLI repo.
https://github.com/angular/angular-cli/pull/13406
PR Close#28142
This commit fixes a bug whereby a Bazel project created by the
schematics would not compiled if project contains routing module.
It is missing a dependency on the router package.
PR Close#28141
* This is a follow-up to cd0451305a which fixes that "ngc-wrapped" from the "npm" workspace is always used if "angular" is fetched as an external dependency.
PR Close#28137
With the update to TypeScript 3.2.x, a big issue seems to have appeared for downstream Bazel users. If the downstream user still uses a lower TypeScript version, normal Bazel targets using the `ng_module` rule are still compiled with the correct/old TypeScript version (assuming they set the `node_modules` attribute properly).
But, if they build the previous Bazel targets by specifying them within a `ng_package` rule, the TypeScript version from the Angular `workspace` is being used for the replayed ESM5 compilation. This is because we resolve the replay compiler to `ngc_wrapped` or `tsc_wrapped` Bazel executables which are defined as part of the `angular` workspace. This means that the compilers are different if the downstream user uses `ngc-wrapped` from the `@npm` repository because the replayed compilation would use the compiler with `@ngdeps//typescript`.
In order to fix this, we should just use the compiler that is defined in the `@angular//BUILD.bazel` file. This target by defaults to the "@npm" workspace which is working for downstream users. This is similar to how it is handled for `tsc-wrapped`. `tsc-wrapped` works as expected for downstream users.
**Note**: This is not the ideal solution because ideally we would
completely respect the `compiler` option from the base `ng_module`, but
this is not possible in a hermetic way, unless we somehow accept the
`compiler` as an attribute that builds all transitive deps. This is
something we should explore in the future. For now, we just fix this in
a reasonable way that is also used for `tsc_wrapped` from the TypeScript
rules.
PR Close#28053
index.html needs to have the zone.js and the project bundle injected
using script tags. This used to be done explicitly by specifying a
new index.html but with `web_package` rule introduced in rules_nodejs,
it is now possible to perform the injection dynamically.
PR Close#27995
I think only should be after BrowserModule , because we can import more than BrowserModule and I think we need to import other modules to AppModule in most of cases and we should import BrowserModule only in AppModule,so that thing seems okay.
PR Close#27677
Link to the document "53 percent of mobile site visits" was changed, updated link. Old link led to a page that didn't have the statistics on it.
PR Close#26628
Occasionally, URLs take longer to load, which causes CI flakes.
In #27903, the timeout for external URLs was increased, but internal
URLs turned out to be affected as well.
PR Close#28103
Incremental rebuilds is a fundamental part of the development
workflow. `@bazel/ibazel` should be added to the dev dependencies
of a Bazel project.
PR Close#28090
The version was updated on master (with 0efbb3738), but the commit was
not backported to 7.2.x. As a result, the version on angular.io appears
as `7.2.0-rc.0` (instead of 7.2.0).
PR Close#28075
Changes:
- Change the project type to `service-worker`, so that it gets
appropriate `package.json` (with `@angular/service-worker` dependency)
and `angular.json` (with `serviceWorker: true` in production config).
- Move `ngsw-config.json` to the correct directory.
- Specify custom test commands for aio's `yarn example-e2e` to also
verify that the ServiceWorker bits are set up correctly.
PR Close#28020
Previously, cli-based docs examples were tested using `yarn e2e ...`. In
some cases, it might make sense to run different or additional checks
for a docs example (when running `yarn example-e2e` in `aio/`).
Currently, the only option is to define a custom project type and
overwrite the `e2e` yarn script in `package.json`. Doing so (in addition
to being cumbersome and verbose) would also end up in the `.zip` archive
that users can download to run the example locally. This would be
confusing, if these custom tests are specific to our CI needs.
This commit adds support for defining a custom list of commands per
example. These commands (if specified) would be run instead of the
default `yarn e2e ...`, when testing the docs examples on CI (via
`yarn example-e2e`).
(This feature will be used to verify that the
`service-worker-getting-started` example is set up correctly in a
subsequent commit, but can be useful in other cases as well.)
PR Close#28020
File overwrites:
- **angular.json**: Add `serviceWorker: true` to production config.
- **package.json**: Add `@angular/service-worker` to dependencies.
This will make any `service-worker` examples work out-of-the-box, when
downloading and running locally from the `.zip` archives.
PR Close#28020
* Interface that a class can implement to be a guard deciding if a children can be loaded.
'...if a children...' changed to '...if children...'
* Interface that a class can implement to be a guard deciding if children can be loaded.
PR Close#27894
This change matches the routes found in the following code example
for auth.guard.ts as well as the login.component.1.ts in the "Add
the LoginComponent" section.
PR Close#27879
There are various e2e tests with the `_spec.ts` suffix in the Angular project. Currently the protractor Bazel rule does not pick up these files and just ignores them. Since underscore is commonly used, we should support this.
Needed for the conversion fo the `examples` to Bazel.
PR Close#28022
Project created by @angular/cli depends on Bazel at build time and
we should not assume that Bazel is available globally.
Instead, the project should specify an explicit dev dependency on
`@bazel/bazel`.
PR Close#28032
Instead of relying on implicit dependencies through Angular, the WORKSPACE
of the project should explicitly add rules_nodejs and rules_typescript so
it can better control the versions.
PR Close#28000
* Fixes that the flat module out files do not have a proper AMD module name on Windows. This is currently blocking serving a `ng_module` using the Bazel TypeScript `devserver` on Windows.
PR Close#27839
The existing example makes it seem like zip is a pipeable operator. It can be used this way, but I think that is for backwards compatibility. You can achieve the same functionality by using it as an Observable creator. I think this also makes the example clearer.
PR Close#26790
@alxhub spotted that the public api rule in codeowners is being overriden by the Build & CI Owners rule.
swapping the two sections fixes the problem.
PR Close#27999
On push builds, CircleCI provides `CIRCLE_COMPARE_URL`, which we use to
extract the commit range for a given build. When a workflow is rerun
(e.g. to recover from a flaked job), `CIRCLE_COMPARE_URL` is not
defined, causing some jobs to fail.
This commit fixes it by retrieving the compare URL from the original
workflow. It uses a slow process involving a (potentially large) number
of requests to CircleCI API.
It depends on the (undocumented) fact, that the `workspace_id` is the
same on all rerun workflows and the same as the original `workflow_id`.
PR Close#27775
* Groups the two sharded `test_docs_examples` job using CircleCI's `parallelism` feature. This makes the amount of jobs that show up on a PR, more reduced and also reduces code duplication for maintaining the Circle job definition.
PR Close#27937
I'm not sure why this problem is visible only now or how this worked before, but the CI
is now failing because @types/node is missing.
I also added the yarn.lock file which was previously omitted. We want the yarn.lock file in so that
our deps don't change over time without us knowing.
PR Close#27937
test.sh is no longer needed... all the tests should now be executed via bazel.
if for whatever reason we need to run the legacy unit test setup, we should should follow the commands that we use to execute those tests in .circle/config.yaml
PR Close#27937
Moving the tests over to CircleCI in pretty much "as-is" state just so that we can drop the dependency on Travis.
In the followup changes we plan to migrate these tests to run on sauce under bazel. @gregmagolan is working on that.
I've previously verified that all the tests executed in legacy-unit-tests-local already under bazel.
Therefore the legacy-unit-tests-local job is strictly not necessary any more, but given how flaky legacy-unit-tests-saucelabs is,
it is good to have the -local job just so that we can quickly determine if any failure is a flake or legit issue
(the bazel version of these tests could theoretically run in a slightly different way and fail or not fail in a different way, so having -lcoal job is just an extra safety check).
This change was coauthored with @devversion
PR Close#27937
* Currently the protractor utils assume that the specified Bazel server runfile can be resolved by just using the real file system. This is not the case on Windows because the runfiles are not symlinked into the working directory and need to be resolved through the runfile manifest.
PR Close#27915
Currently when building a package on Windows, the typings re-export for secondary entry-points is not valid TypeScript. Similarly the metadata and the "package.json" files use non-posix paths and cause inconsistency within the NPM package.
For example:
_package.json_
```
"esm5": "./esm5\\core.js",
"esm2015": "./esm2015\\core.js",
```
_testing.d.t.s_ (of the `core` package)
```
export * from './testing\testing';
```
PR Close#27829
I’ve observed that Brandon reviews many docs-only PRs and then we still need me or Jeniffer to approve them.
In most cases, Brandon is perfectly qualified to approve these, so I’m proposing that Brandon is added to the framework-global-approvers-for-docs-only-changes group.
PR Close#27949
2019-01-16 11:54:02 -08:00
1432 changed files with 169187 additions and 24683 deletions
@ -37,7 +37,9 @@ Please create and share minimal reproduction of the issue starting with this tem
<!-- ✍️--> https://stackblitz.com/...
<!--
If StackBlitz is not suitable for reproduction of your issue, please create a minimal GitHub repository with the reproduction of the issue. Share the link to the repo below along with step-by-step instructions to reproduce the problem, as well as expected and actual behavior.
If StackBlitz is not suitable for reproduction of your issue, please create a minimal GitHub repository with the reproduction of the issue.
A good way to make a minimal reproduction is to create a new app via `ng new repro-app` and add the minimum possible code to show the problem.
Share the link to the repo below along with step-by-step instructions to reproduce the problem, as well as expected and actual behavior.
Issues that don't have enough info and can't be reproduced will be closed.
This folder contains opt-in [Workspace Settings](https://code.visualstudio.com/docs/getstarted/settings) and [Extension Recommendations](https://code.visualstudio.com/docs/editor/extension-gallery#_workspace-recommended-extensions) that the Angular team recommends using when working on this repository.
## Usage
To use the recommended settings follow the steps below:
- copy `.vscode/recommended-settings.json` to `.vscode/settings.json`
- restart the editor
If you already have your custom workspace settings you should instead manually merge the file content.
This isn't an automatic process so you will need to repeat it when settings are updated.
To see the recommended extensions select "Extensions: Show Recommended Extensions" in the [Command Palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette).
## Editing `.vscode/recommended-settings.json`
If you wish to add extra configuration items please keep in mind any settings you add here will be used by many users.
Try to keep these settings to things that help facilitate the development process and avoid altering the user workflow whenever possible.
* build: upgrade yargs package to 13.1.0 ([#31457](https://github.com/angular/angular/issues/34157))
This release backports a security patch which fixes a transitive dependency on a vulnerable version of the `mem` package. See [#33933](https://github.com/angular/angular/issues/33933) for details.
* **bazel:** unable to launch protractor test on windows ([#27850](https://github.com/angular/angular/issues/27850)) ([1e6c9be](https://github.com/angular/angular/commit/1e6c9be))
* **upgrade:** do not break if `onMicrotaskEmpty` emits while a `$digest` is in progress ([#29794](https://github.com/angular/angular/issues/29794)) ([#30107](https://github.com/angular/angular/issues/30107)) ([1084c19](https://github.com/angular/angular/commit/1084c19)), closes [#24680](https://github.com/angular/angular/issues/24680) [/github.com/angular/angular/blob/78146c189/packages/core/src/util/ng_dev_mode.ts#L12](https://github.com//github.com/angular/angular/blob/78146c189/packages/core/src/util/ng_dev_mode.ts/issues/L12) [#24680](https://github.com/angular/angular/issues/24680)
* **bazel:** use //:tsconfig.json as the default for ng_module ([#29670](https://github.com/angular/angular/issues/29670)) ([#29711](https://github.com/angular/angular/issues/29711)) ([9e33dc3](https://github.com/angular/angular/commit/9e33dc3))
* **platform-browser:** insert APP_ID in styles, contentAttr and hostAttr ([#17745](https://github.com/angular/angular/issues/17745)) ([ca14509](https://github.com/angular/angular/commit/ca14509))
* **common:** escape query selector used when anchor scrolling ([#29577](https://github.com/angular/angular/issues/29577)) ([7671c73](https://github.com/angular/angular/commit/7671c73)), closes [#28193](https://github.com/angular/angular/issues/28193)
* **router:** adjust setting navigationTransition when a new navigation cancels an existing one ([#29636](https://github.com/angular/angular/issues/29636)) ([e884c0c](https://github.com/angular/angular/commit/e884c0c)), closes [#29389](https://github.com/angular/angular/issues/29389) [#29590](https://github.com/angular/angular/issues/29590)
* **animations:** ensure `position` and `display` styles are handled outside of keyframes/web-animations ([#28911](https://github.com/angular/angular/issues/28911)) ([86981b3](https://github.com/angular/angular/commit/86981b3)), closes [#24923](https://github.com/angular/angular/issues/24923) [#25635](https://github.com/angular/angular/issues/25635)
* **router:** removed obsolete TODO comment ([#29085](https://github.com/angular/angular/issues/29085)) ([2a25ac2](https://github.com/angular/angular/commit/2a25ac2))
* **service-worker:** detect new version even if files are identical to an old one ([#26006](https://github.com/angular/angular/issues/26006)) ([5669333](https://github.com/angular/angular/commit/5669333)), closes [#24338](https://github.com/angular/angular/issues/24338)
* **bazel:** pin browser repositories using [@npm](https://github.com/npm)_bazel_karma//:browser_repositories.bzl in bazel schematics ([#28896](https://github.com/angular/angular/issues/28896)) ([b686449](https://github.com/angular/angular/commit/b686449))
* **core:** traverse and sanitize content of unsafe elements ([#28804](https://github.com/angular/angular/issues/28804)) ([fdcf877](https://github.com/angular/angular/commit/fdcf877)), closes [#25879](https://github.com/angular/angular/issues/25879) [#25879](https://github.com/angular/angular/issues/25879) [#26007](https://github.com/angular/angular/issues/26007) [#28427](https://github.com/angular/angular/issues/28427)
* **language-service:** Fix completions for input/output with alias ([#28904](https://github.com/angular/angular/issues/28904)) ([d0018e6](https://github.com/angular/angular/commit/d0018e6)), closes [#27959](https://github.com/angular/angular/issues/27959)
* **compiler-cli:** diagnostics should respect "newLine" compiler option ([#28550](https://github.com/angular/angular/issues/28550)) ([ce750e6](https://github.com/angular/angular/commit/ce750e6))
* **router:** redirect to root url when returned as UrlTree from guard ([#28271](https://github.com/angular/angular/issues/28271)) ([1e58a21](https://github.com/angular/angular/commit/1e58a21)), closes [#27845](https://github.com/angular/angular/issues/27845)
* **router:** set href when routerLink is used on an 'area' element ([#28441](https://github.com/angular/angular/issues/28441)) ([d491a20](https://github.com/angular/angular/commit/d491a20)), closes [#28401](https://github.com/angular/angular/issues/28401)
* **bazel:** Bazel builder resolves with require.resolve() ([#28478](https://github.com/angular/angular/issues/28478)) ([d85d396](https://github.com/angular/angular/commit/d85d396))
* **bazel:** fix integration test for bazel-schematics ([#28460](https://github.com/angular/angular/issues/28460)) ([449da8c](https://github.com/angular/angular/commit/449da8c))
### Performance Improvements
* pngcrush all pngs ([#28479](https://github.com/angular/angular/issues/28479)) ([1a25144](https://github.com/angular/angular/commit/1a25144)), closes [#18243](https://github.com/angular/angular/issues/18243)
* **bazel:** add [@npm](https://github.com/npm)//tslib dep to e2e ts_library target in bazel-workspace schematic ([#28358](https://github.com/angular/angular/issues/28358)) ([8cee56e](https://github.com/angular/angular/commit/8cee56e))
* **bazel:** Bazel-workspace schematics should run in ScopedTree ([#28349](https://github.com/angular/angular/issues/28349)) ([260ac20](https://github.com/angular/angular/commit/260ac20))
* **bazel:** Builder should invoke local bazel/iblaze ([#28303](https://github.com/angular/angular/issues/28303)) ([12b8a6e](https://github.com/angular/angular/commit/12b8a6e))
* **bazel:** ng-new should run yarn install ([#28381](https://github.com/angular/angular/issues/28381)) ([a9d46e4](https://github.com/angular/angular/commit/a9d46e4))
### Performance Improvements
* yarn version upgrade ([#28360](https://github.com/angular/angular/issues/28360)) ([cc1b2a5](https://github.com/angular/angular/commit/cc1b2a5))
* **bazel:** Fix integration test after v8 bump ([#28194](https://github.com/angular/angular/issues/28194)) ([7b772e9](https://github.com/angular/angular/commit/7b772e9)), closes [#28142](https://github.com/angular/angular/issues/28142)
* **router:** `skipLocationChange` with named outlets ([#28301](https://github.com/angular/angular/issues/28301)) ([32737a6](https://github.com/angular/angular/commit/32737a6)), closes [#27680](https://github.com/angular/angular/issues/27680) [#28200](https://github.com/angular/angular/issues/28200)
### Features
* **bazel:** Add support for SASS ([#28167](https://github.com/angular/angular/issues/28167)) ([a4d9192](https://github.com/angular/angular/commit/a4d9192))
* **bazel:** Add [@bazel](https://github.com/bazel)/bazel to dev deps ([#28032](https://github.com/angular/angular/issues/28032)) ([21093b9](https://github.com/angular/angular/commit/21093b9))
* **bazel:** Add /bazel-out to .gitignore ([#27874](https://github.com/angular/angular/issues/27874)) ([e4fc8ba](https://github.com/angular/angular/commit/e4fc8ba))
* **bazel:** Add ibazel to deps of Bazel project ([#28090](https://github.com/angular/angular/issues/28090)) ([28d34b6](https://github.com/angular/angular/commit/28d34b6))
* **bazel:** Bazel schematics should add router package ([#28141](https://github.com/angular/angular/issues/28141)) ([02a852a](https://github.com/angular/angular/commit/02a852a))
* **bazel:** flat module misses AMD module name on windows ([#27839](https://github.com/angular/angular/issues/27839)) ([c3d8e28](https://github.com/angular/angular/commit/c3d8e28))
* **bazel:** ng_package creates invalid typings reexport on windows ([#27829](https://github.com/angular/angular/issues/27829)) ([6b394f6](https://github.com/angular/angular/commit/6b394f6))
* **bazel:** packager not properly removing amd directives on windows ([#27829](https://github.com/angular/angular/issues/27829)) ([fad4145](https://github.com/angular/angular/commit/fad4145))
* **bazel:** protractor rule does not run spec files with underscore ([#28022](https://github.com/angular/angular/issues/28022)) ([f05c5f8](https://github.com/angular/angular/commit/f05c5f8))
* **bazel:** protractor utils cannot start server on windows ([#27915](https://github.com/angular/angular/issues/27915)) ([0be8487](https://github.com/angular/angular/commit/0be8487))
* **bazel:** replay compilation uses wrong compiler for building esm5 ([#28053](https://github.com/angular/angular/issues/28053)) ([fbbdaaa](https://github.com/angular/angular/commit/fbbdaaa))
* **router:** ensure URL is updated after second redirect with UrlUpdateStrategy="eager" ([#27680](https://github.com/angular/angular/issues/27680)) ([6ae7aee](https://github.com/angular/angular/commit/6ae7aee)), closes [#27116](https://github.com/angular/angular/issues/27116)
7.2.0 release also contains all the fixes released in 7.1.4.
### Features
* add support for typescript 3.2 ([#27536](https://github.com/angular/angular/issues/27536)) ([17e702b](https://github.com/angular/angular/commit/17e702b))
* **bazel:** ng-new schematics with Bazel ([#27277](https://github.com/angular/angular/issues/27277)) ([06d4a0c](https://github.com/angular/angular/commit/06d4a0c))
* **forms:** match getError and hasError to get method signature ([#20211](https://github.com/angular/angular/issues/20211)) ([1b0b36d](https://github.com/angular/angular/commit/1b0b36d))
* **upgrade:** allow nesting components from different downgraded modules ([#27217](https://github.com/angular/angular/issues/27217)) ([bc0ee01](https://github.com/angular/angular/commit/bc0ee01))
* **router:** add predicate function mode for runGuardsAndResolvers ([#27682](https://github.com/angular/angular/issues/27682)) ([12c3176](https://github.com/angular/angular/commit/12c3176)), closes [#26861](https://github.com/angular/angular/issues/26861) [#18253](https://github.com/angular/angular/issues/18253) [#27464](https://github.com/angular/angular/issues/27464)
* **router:** add a Navigation type available during navigation ([#27198](https://github.com/angular/angular/issues/27198)) ([d40af0c](https://github.com/angular/angular/commit/d40af0c))
* **router:** allow passing state to `NavigationExtras` ([#27198](https://github.com/angular/angular/issues/27198)) ([67f4a5d](https://github.com/angular/angular/commit/67f4a5d))
* **router:** restore whole object when navigating back to a page managed by Angular router ([#27198](https://github.com/angular/angular/issues/27198)) ([2684249](https://github.com/angular/angular/commit/2684249))
### Bug Fixes
* **animations:** do not truncate decimals for delay ([#24455](https://github.com/angular/angular/issues/24455)) ([f1c9d6a](https://github.com/angular/angular/commit/f1c9d6a))
* **animations:** mark actual descendant node as disabled ([#26180](https://github.com/angular/angular/issues/26180)) ([df123e0](https://github.com/angular/angular/commit/df123e0))
* **bazel:** unable to launch protractor test on windows ([#27850](https://github.com/angular/angular/issues/27850)) ([1e6c9be](https://github.com/angular/angular/commit/1e6c9be))
* **bazel:** devserver entry_module should have underscore name ([#27719](https://github.com/angular/angular/issues/27719)) ([f57916c](https://github.com/angular/angular/commit/f57916c))
* **bazel:** emit full node stack traces when Angular compilation crashes ([#27678](https://github.com/angular/angular/issues/27678)) ([522919a](https://github.com/angular/angular/commit/522919a))
* **bazel:** fix major/minor semver check between [@angular](https://github.com/angular)/bazel npm packager version and angular bazel repo version ([#27635](https://github.com/angular/angular/issues/27635)) ([1cc08b4](https://github.com/angular/angular/commit/1cc08b4))
* **bazel:** Load http_archive and rules_nodejs dependencies ([#27609](https://github.com/angular/angular/issues/27609)) ([8313ffc](https://github.com/angular/angular/commit/8313ffc))
* **bazel:** ng_package writes unrelevant definitions to bazel out ([#27519](https://github.com/angular/angular/issues/27519)) ([44dfa60](https://github.com/angular/angular/commit/44dfa60)), closes [/github.com/angular/angular/blob/4f9374951d67c75f67a31c110bd61ab72563db7d/packages/bazel/src/ng_package/packager.ts#L105-L124](https://github.com//github.com/angular/angular/blob/4f9374951d67c75f67a31c110bd61ab72563db7d/packages/bazel/src/ng_package/packager.ts/issues/L105-L124)
* **bazel:** Set module_name and enable ng test ([#27715](https://github.com/angular/angular/issues/27715)) ([85866de](https://github.com/angular/angular/commit/85866de))
* **bazel:** fix TS errors in the `schematics/bazel-workspace` files ([#27600](https://github.com/angular/angular/issues/27600)) ([3290fc3](https://github.com/angular/angular/commit/3290fc3))
* **bazel:** Read latest versions from latest-versions.ts & use semver check ([#27526](https://github.com/angular/angular/issues/27526)) ([30a3b49](https://github.com/angular/angular/commit/30a3b49))
* **bazel:** tsickle dependency not working with typescript 3.1.x ([#27402](https://github.com/angular/angular/issues/27402)) ([f034114](https://github.com/angular/angular/commit/f034114))
* **bazel:** do not throw error when writing tsickle externs ([#27200](https://github.com/angular/angular/issues/27200)) ([20a2bae](https://github.com/angular/angular/commit/20a2bae))
* **bazel:** do not throw if ts compile action does not create esm5 outputs ([#27401](https://github.com/angular/angular/issues/27401)) ([c61a8b7](https://github.com/angular/angular/commit/c61a8b7))
* **bazel:** ng_package cannot be run multiple times without clean ([#27200](https://github.com/angular/angular/issues/27200)) ([4f93749](https://github.com/angular/angular/commit/4f93749))
* **bazel:** ng_package not generating UMD bundles on windows ([#27200](https://github.com/angular/angular/issues/27200)) ([7d59880](https://github.com/angular/angular/commit/7d59880))
* **bazel:** ng_package should correctly map to source maps in secondary entry-points ([#27313](https://github.com/angular/angular/issues/27313)) ([eb17502](https://github.com/angular/angular/commit/eb17502)), closes [#25510](https://github.com/angular/angular/issues/25510)
* **compiler-cli:** create LiteralLikeNode for String and Number literal ([#27536](https://github.com/angular/angular/issues/27536)) ([2c9b6c0](https://github.com/angular/angular/commit/2c9b6c0))
* **compiler-cli:** flatModuleIndex files not generated on windows with multiple input files ([#27200](https://github.com/angular/angular/issues/27200)) ([d3c08e7](https://github.com/angular/angular/commit/d3c08e7))
* **core:** export a value for InjectFlags ([#27279](https://github.com/angular/angular/issues/27279)) ([23b06af](https://github.com/angular/angular/commit/23b06af)), closes [#27251](https://github.com/angular/angular/issues/27251)
* **core:** More precise return type for `InjectableDecorator` ([#27360](https://github.com/angular/angular/issues/27360)) ([4b9948c](https://github.com/angular/angular/commit/4b9948c)), closes [#26942](https://github.com/angular/angular/issues/26942)
* **forms:** typed argument for FormBuilder group ([#26985](https://github.com/angular/angular/issues/26985)) ([b0c7561](https://github.com/angular/angular/commit/b0c7561))
* **platform-server:** add [@angular](https://github.com/angular)/http to the list of peerDependencies ([#27307](https://github.com/angular/angular/issues/27307)) ([32c5be9](https://github.com/angular/angular/commit/32c5be9)), closes [#26154](https://github.com/angular/angular/issues/26154)
* **router:** ensure URL is updated after second redirect with UrlUpdateStrategy="eager" ([#27523](https://github.com/angular/angular/issues/27523)) ([ad26cd6](https://github.com/angular/angular/commit/ad26cd6)), closes [#27116](https://github.com/angular/angular/issues/27116)
* **router:** update URL after redirects when urlHandlingStrategy='eager' ([#27356](https://github.com/angular/angular/issues/27356)) ([11a8bd8](https://github.com/angular/angular/commit/11a8bd8)), closes [#27076](https://github.com/angular/angular/issues/27076)
* **upgrade:** allow nesting components from different downgraded modules ([#27217](https://github.com/angular/angular/issues/27217)) ([bc0ee01](https://github.com/angular/angular/commit/bc0ee01))
* **upgrade:** upgrade Directive facade should not return different instance from constructor ([#27660](https://github.com/angular/angular/issues/27660)) ([c986d3d](https://github.com/angular/angular/commit/c986d3d))
### Features
* add support for typescript 3.2 ([#27536](https://github.com/angular/angular/issues/27536)) ([17e702b](https://github.com/angular/angular/commit/17e702b))
* **router:** add predicate function mode for runGuardsAndResolvers ([#27682](https://github.com/angular/angular/issues/27682)) ([12c3176](https://github.com/angular/angular/commit/12c3176)), closes [#26861](https://github.com/angular/angular/issues/26861) [#18253](https://github.com/angular/angular/issues/18253) [#27464](https://github.com/angular/angular/issues/27464)
* **upgrade:** don't rely upon the runtime to resolve forward refs ([#27132](https://github.com/angular/angular/issues/27132)) ([a4462c2](https://github.com/angular/angular/commit/a4462c2))
* **bazel:** fix TS errors in the `schematics/bazel-workspace` files ([#27600](https://github.com/angular/angular/issues/27600)) ([3290fc3](https://github.com/angular/angular/commit/3290fc3))
* **bazel:** Read latest versions from latest-versions.ts & use semver check ([#27526](https://github.com/angular/angular/issues/27526)) ([30a3b49](https://github.com/angular/angular/commit/30a3b49))
* **bazel:** tsickle dependency not working with typescript 3.1.x ([#27402](https://github.com/angular/angular/issues/27402)) ([f034114](https://github.com/angular/angular/commit/f034114))
* **forms:** typed argument for FormBuilder group ([#26985](https://github.com/angular/angular/issues/26985)) ([b0c7561](https://github.com/angular/angular/commit/b0c7561))
* **platform-server:** add [@angular](https://github.com/angular)/http to the list of peerDependencies ([#27307](https://github.com/angular/angular/issues/27307)) ([236ac06](https://github.com/angular/angular/commit/236ac06)), closes [#26154](https://github.com/angular/angular/issues/26154)
* **bazel:** do not throw error when writing tsickle externs ([#27200](https://github.com/angular/angular/issues/27200)) ([20a2bae](https://github.com/angular/angular/commit/20a2bae))
* **bazel:** do not throw if ts compile action does not create esm5 outputs ([#27401](https://github.com/angular/angular/issues/27401)) ([c61a8b7](https://github.com/angular/angular/commit/c61a8b7))
* **bazel:** ng_package cannot be run multiple times without clean ([#27200](https://github.com/angular/angular/issues/27200)) ([4f93749](https://github.com/angular/angular/commit/4f93749))
* **bazel:** ng_package not generating UMD bundles on windows ([#27200](https://github.com/angular/angular/issues/27200)) ([7d59880](https://github.com/angular/angular/commit/7d59880))
* **bazel:** ng_package should correctly map to source maps in secondary entry-points ([#27313](https://github.com/angular/angular/issues/27313)) ([eb17502](https://github.com/angular/angular/commit/eb17502)), closes [#25510](https://github.com/angular/angular/issues/25510)
* **compiler-cli:** flatModuleIndex files not generated on windows with multiple input files ([#27200](https://github.com/angular/angular/issues/27200)) ([d3c08e7](https://github.com/angular/angular/commit/d3c08e7))
* **core:** export a value for InjectFlags ([#27279](https://github.com/angular/angular/issues/27279)) ([23b06af](https://github.com/angular/angular/commit/23b06af)), closes [#27251](https://github.com/angular/angular/issues/27251)
* **core:** More precise return type for `InjectableDecorator` ([#27360](https://github.com/angular/angular/issues/27360)) ([4b9948c](https://github.com/angular/angular/commit/4b9948c)), closes [#26942](https://github.com/angular/angular/issues/26942)
* **forms:** apply unicode flag to pattern attribute when supported ([#20819](https://github.com/angular/angular/issues/20819)) ([3c34b8b](https://github.com/angular/angular/commit/3c34b8b))
* **platform-server:** add [@angular](https://github.com/angular)/http to the list of peerDependencies ([#27307](https://github.com/angular/angular/issues/27307)) ([32c5be9](https://github.com/angular/angular/commit/32c5be9)), closes [#26154](https://github.com/angular/angular/issues/26154)
* **router:** update URL after redirects when urlHandlingStrategy='eager' ([#27356](https://github.com/angular/angular/issues/27356)) ([11a8bd8](https://github.com/angular/angular/commit/11a8bd8)), closes [#27076](https://github.com/angular/angular/issues/27076)
* **upgrade:** don't rely upon the runtime to resolve forward refs ([#27132](https://github.com/angular/angular/issues/27132)) ([a4462c2](https://github.com/angular/angular/commit/a4462c2))
### Features
* **bazel:** ng-new schematics with Bazel ([#27277](https://github.com/angular/angular/issues/27277)) ([06d4a0c](https://github.com/angular/angular/commit/06d4a0c))
* **router:** add a Navigation type available during navigation ([#27198](https://github.com/angular/angular/issues/27198)) ([d40af0c](https://github.com/angular/angular/commit/d40af0c))
* **router:** allow passing state to `NavigationExtras` ([#27198](https://github.com/angular/angular/issues/27198)) ([67f4a5d](https://github.com/angular/angular/commit/67f4a5d))
* **router:** restore whole object when navigating back to a page managed by Angular router ([#27198](https://github.com/angular/angular/issues/27198)) ([2684249](https://github.com/angular/angular/commit/2684249))
* **upgrade:** don't rely upon the runtime to resolve forward refs ([#27132](https://github.com/angular/angular/issues/27132)) ([a4462c2](https://github.com/angular/angular/commit/a4462c2))
[](https://gitter.im/angular/angular?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
@ -41,16 +41,6 @@ Here are the most important tasks you might need to use:
-`yarn example-e2e --filter=foo` - limit e2e tests to those containing the word "foo"
-`yarn example-e2e --setup --local` - run e2e tests with the local version of Angular contained in the "dist" folder
## Developing on Windows
The `packages/` directory may contain Linux-specific symlinks, which are not recognized by Windows.
These unresolved links cause the docs generation process to fail because it cannot locate certain files.
> Hint: The following steps require administration rights or [Windows Developer Mode](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development) enabled!
To fix this problem, run `scripts/windows/create-symlinks.sh`. This command creates temporary files where the symlinks used to be. Make sure not to commit those files with your documentation changes.
When you are done making and testing your documentation changes, you can restore the original symlinks and delete the temporary files by running `scripts/windows/remove-symlinks.sh`.
It's necessary to remove the temporary files, because otherwise they're displayed as local changes in your git working copy and certain operations are blocked.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
