Currently we read lifecycle hooks eagerly during `ɵɵdefineComponent`.
The result is that it is not possible to do any sort of meta-programing
such as mixins or adding lifecycle hooks using custom decorators since
any such code executes after `ɵɵdefineComponent` has extracted the
lifecycle hooks from the prototype. Additionally the behavior is
inconsistent between AOT and JIT mode. In JIT mode overriding lifecycle
hooks is possible because the whole `ɵɵdefineComponent` is placed in
getter which is executed lazily. This is because JIT mode must compile a
template which can be specified as `templateURL` and those we are
waiting for its resolution.
- `+` `ɵɵdefineComponent` becomes smaller as it no longer needs to copy
lifecycle hooks from prototype to `ComponentDef`
- `-` `ɵɵNgOnChangesFeature` feature is now always included with the
codebase as it is no longer tree shakable.
Previously we have read lifecycle hooks from prototype in the
`ɵɵdefineComponent` so that lifecycle hook access would be monomorphic.
This decision was made before we had `T*` data structures. By not
reading the lifecycle hooks we are moving the megamorhic read form
`ɵɵdefineComponent` to instructions. However, the reads happen on
`firstTemplatePass` only and are subsequently cached in the `T*` data
structures. The result is that the overall performance should be same
(or slightly better as the intermediate `ComponentDef` has been
removed.)
- [ ] Remove `ɵɵNgOnChangesFeature` from compiler. (It will no longer
be a feature.)
- [ ] Discuss the future of `Features` as they hinder meta-programing.
Fix#30497
PR Close#38119
We currently use 16 bits to store information about nodes in a view.
The 16 bits give us 65536 entries in the array, but the problem is that while
the number is large, it can be reached by ~4300 directive instances with host
bindings which could realistically happen is a very large view, as seen in #37876.
Once we hit the limit, we end up overflowing which eventually leads to a runtime error.
These changes bump to using 20 bits which gives us around 1048576 entries in
the array or 16 times more than the current amount which could still technically
be reached, but is much less likely and the user may start hitting browser limitations
by that point.
I picked the 20 bit number since it gives us enough buffer over the 16 bit one,
while not being as massive as a 24 bit or 32 bit.
I've also added a dev mode assertion so it's easier to track down if it happens
again in the future.
Fixes#37876.
PR Close#38014
Fix two issues that affected displaying of SVG icons in IE11:
1. All SVG icons except for one appeared empty. This was related how the
CustomIconRegistry re-used the same <div> element to create all
SVG elements.
2. The GitHub and Twitter buttons next to the search bar were not sized
properly.
Fixes#37847
PR Close#38046
This commit adds a script to build @angular/language-service
locally so that it can be consumed by the Angular extension for
local development.
PR Close#38103
Currently the Ivy language service bundle is [10MB](
https://unpkg.com/browse/@angular/language-service@10.0.4/bundles/) because we
accidentally included typescript in the bundle.
With this change, the bundle size goes down to 1.6MB, which is even smaller
than the View Engine bundle (1.8MB).
```bash
$ yarn bazel build //packages/language-service/bundles:ivy
$ ls -lh dist/bin/packages/language-service/bundles/ivy.umd.js
1.6M Jul 15 15:49 dist/bin/packages/language-service/bundles/ivy.umd.js
```
PR Close#38088
* Add petebacondarwin to public-api, size-tracking, and circular-dependencies
* Add mhevery, josephperrott, and jelbourn to code-ownership
PR Close#37994
Fixes the following issues related to how we validate properties during JIT:
- The invalid property warning was printing `null` as the node name
for `ng-content`. The problem is that when generating a template from
`ng-content` we weren't capturing the node name.
- We weren't running property validation on `ng-container` at all.
This used to be supported on ViewEngine and seems like an oversight.
In the process of making these changes, I found and cleaned up a
few places where we were passing in `LView` unnecessarily.
PR Close#37773
As part of our CI checks, we ensure the a11y score on certain angular.io
pages do not fall below some thresholds.
This commit increases these thresholds based on our current scores to
ensure we do not regress below current values.
PR Close#37899
* Without this BUILD file we were seeing errors about the reference to
expand_template.bzl in ng_rollup_bundle.bzl because dev-infra/bazel
was not considered a package.
PR Close#38026
Adds Firefox as browser to `dev-infra/browsers` with RBE
compatibility. The default Firefox browser is not compatible similar to
the default Chromium version exposed by `rules_webtesting`.
The Angular Components repository will use this browser target as
it enables RBE support. Also it gives us more flexibility about
the Firefox version we test against. The version provided by
`rules_webtesting` is very old and most likely not frequently
updated (based on past experience).
PR Close#38029
Angular Console has been renamed and links no longer work. It has been decided to remove references to this third-party tool from the AIO documentation.
Closes#37604
PR Close#37608
The `fs.relative()` method assumed that the file-system is a single tree,
which is not the case in Windows, where you can have multiple drives,
e.g. `C:`, `D:` etc.
This commit changes `fs.relative()` so that it no longer forces the result
to be a `PathSegment` and then flows that refactoring through the rest of
the compiler-cli (and ngcc). The main difference is that now, in some cases,
we needed to check whether the result is "rooted", i.e an `AbsoluteFsPath`,
rather than a `PathSegment`, before using it.
Fixes#36777
PR Close#38030
In CLI v10 there was a move to use the new solution-style tsconfig
which became available in TS 3.9.
The result of this is that the standard tsconfig.json no longer contains
important information such as "paths" mappings, which ngcc might need to
correctly compute dependencies.
ngcc (and ngc and tsc) infer the path to tsconfig.json if not given an
explicit tsconfig file-path. But now that means it infers the solution
tsconfig rather than one that contains the useful information it used to
get.
This commit logs a warning in this case to inform the developer
that they might not have meant to load this tsconfig and offer
alternative options.
Fixes#36386
PR Close#38003
Remove an article from the `Data flow in forms` section of the forms overview guide. The use of `the` and `a` together
is not syntactically correct.
PR Close#37933
In #37957, parts of the testing guide were broken out into separate
guides. As part of that work, the `<live-example>` tags were also copied
to the new guides. These `<live-example>` tags did not specify the
targeted example project via the `name` attribute, thus they were
implicitly targeting the example with the same name as the guide they
were in. See the [Docs style guide][1] for more info.
However, there is only one example project (`testing/`) and all
`<live-example>` tags were supposed to target that. This worked fine on
the `testing.md` guide, but it broke on other guides (which tried to
target non-existing example projects based on their names).
This commit fixes it by explicitly specifying which example is targeted
by the `<live-example>` tags. It also removes the `embedded-style`
attribute that has no effect.
[1]: https://angular.io/guide/docs-style-guide#live-examplesFixes#38036
PR Close#38038
With `rules_nodejs` v2.0.0 being in RC phase currently, we should
make sure that the package is compatible so that we can use it
in the components repo in combination with rules_nodejs v2.0.0.
In v2.0.0 of the NodeJS rules, Bazel workspaces are recommended
to no longer be symlinked under a separate repository. Instead,
bazel rules and targets should be accessed directly from the
user-selected NPM repository. Usually `@npm`, so that the import
changes to `@npm//@angular/dev-infra-private/<..>`.
PR Close#37968
An extra semicolon in searchHeroes function was removed in the http guide
found in aio/content/guide/http.md
docs(http): Remove extra semicolon in a code example found in the http guide
Removed extra semicolon in handleError function in the file located at
aio/content/examples/http/src/app/config/config.service.ts, which serves
as a source of code examples for the http guide.
Replace a comma for a dot in the comment at line 79 to ensure consistency
with the rest of the document.
Capitalized and added a dot at the end of the comment at line 84 to
ensure consistency with the other comments.
PR Close#37228
The Stackblitz and zip-file include `doc-files` unnecssarily and are missing
the locale files. This commit updates the `stackblitz.json` to fix this.
PR Close#37947
The `zipper.json` file is only needed if the example does not
have a `stackblitz.json` file, which this (i18n) example does.
Moreover, it appears that having both can cause the generated
zip file to be corrupted and not unzippable.
Fixes #37849
PR Close#37947
This doc is very old and rusty. I'm reformatting it to follow the one-setence-per-line rule.
I also updated a few sections, since they were either poorly written or obsolete.
PR Close#37951
This file is inert unless it's explicitly included into the local git config via:
```
git config --add include.path '../.ng-dev/gitconfig'
```
Calling that command will append the following into `.git/config` of the current git workspace
(i.e. $GIT_DIR, typically `angular/.git/config`):
```
[include]
path = ../.ng-dev/gitconfig
```
I'm intentionally keeping the config inert for now until we prove that this is a good idea.
Eventually we could roll this change out to all the contributors via an npm post-install script.
PR Close#37951
In an effort to make angular documentation easier for users to read,
we are moving the router tutorial currently in router.md to a new file.
To support this change, we have done the following:
* Update files to fix any broken links caused by moving the file
* Updated the new file to follow tutorial guidelines
* Add the new file to the table of contents under, Tutorials.
PR Close#37979
Builds on top of #34655 to support more cases that could be using a pipe inside host bindings (e.g. ternary expressions or function calls).
Fixes#37610.
PR Close#37883
The dev-infra commit message validation optionally can check for lines
to not exceed a given amount of characters. This is desired for most
commit messages, but sometimes not actionable if a long URL is inserted
into the commit message. With this commit, we skip the max line length
check for lines that start with an URL.
PR Close#37890
Splits the dev-infra configurations into individual files inside the
`.ng-dev/` folder. This helps with clarity as there is no single
configuration file that becomes extremely large and difficult to
maintain.
Additionally, more explicit configuration types are now used. This
fixed the max-line length setting for commit message validation.
This option is currently named incorrectly and a noop.
PR Close#37890
We recently added a new folder for common bazel utilities
to `dev-infra`. The `ng_rollup_bundle` rule relies on an
utility that is provided by this `bazel/` folder.
Unfortunately though it looks like this folder is currently
not included in the NPM package, so that the `ng_rollup_bundle`
rule does not work as expected. This commit fixes that by
including the bazel utilities in the NPM package.
PR Close#37891
