This commit will store a cached copy of the parsed tsconfig
that can be reused if the tsconfig path is the same.
This will improve the ngcc "noop" case, where there is no processing
to do, when the entry-points have already been processed.
Previously we were parsing this config every time we checked for
entry-points to process, which can take up to seconds in some
cases.
Cherry-picked from #37417 (6e7bd939f6901539305de0917350c5ebc328e775).
Resolves#36882
Previously, event listeners for component output events attached on an
Angular custom element before inserting it into the DOM (i.e. before
instantiating the underlying component) didn't fire for events emitted
during initialization lifecycle hooks, such as `ngAfterContentInit`,
`ngAfterViewInit`, `ngOnChanges` (initial call) and `ngOnInit`.
The reason was that that `NgElementImpl` [subscribed to events][1]
_after_ calling [ngElementStrategy#connect()][2], which is where the
[initial change detection][3] takes place (running the initialization
lifecycle hooks).
This commit fixes this by:
1. Ensuring `ComponentNgElementStrategy#events` is defined and available
for subscribing to, even before instantiating the component.
2. Ensuring `NgElementImpl` subscribes to `NgElementStrategy#events`
before calling `NgElementStrategy#connect()` (which initializes the
component instance).
Jira issue: [FW-2010](https://angular-team.atlassian.net/browse/FW-2010)
[1]: c0143cb2ab/packages/elements/src/create-custom-element.ts (L167-L170)
[2]: c0143cb2ab/packages/elements/src/create-custom-element.ts (L164)
[3]: c0143cb2ab/packages/elements/src/component-factory-strategy.ts (L158)Fixes#36141
Migrate the release tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the ts-circular-dependencies tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the merge tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the pullapprove tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the rebase tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the discover-new-conflicts tool in ng-dev to use new logging system
rather than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the commit-message tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Migrate the formatting tool in ng-dev to use new logging system rather
than directly calling console.* to create a better experience
for users.
PR Close#37232
Adds .group and .groupEnd functions to each of the logging functions
to allow creating groups in the logged output. Additionally removes
the color parameter from logging functions, in favor of the color
being applied to the string at the call site.
PR Close#37232
Due to the desired patch branch (10.0.x) being on a semver version
that is unreleased as stable (there is no 10.0.0 on latest, it is on
next) our logic for determining target patch branches does not work.
This change is a workaround to unblock merging in the repo while a
longer term answer is discovered.
PR Close#37245
The components repo and framework repository follow the same patch
branch concept. We should be able to share a script for determining
these merge branches.
Additonally the logic has been improved compared to the old merge script because
we no longer consult `git ls-remote` unless really needed. Currently,
`git ls-remote` is always consulted, even though not necessarily needed.
This can slow down the merge script and the caretaker process when a
couple of PRs are merged (personally saw around ~4 seconds per merge).
Additionally, the new logic is more strict and will ensure (in most
cases) that no wrong patch/minor branch is determined. Previously,
the script just used the lexicographically greatest patch branch.
This _could_ be wrong when a new patch branch has been created too
early, or by accident.
PR Close#37217
We recently added support for automatic registration of `ts-node`
when the dev-infra configuration is loaded.
In addition to registering ts-node, we should also ensure that the
`commonjs` module is set up. By default, `ts-node` would use ES module
imports that are not supported by default in NodeJS.
PR Close#37217
Previously, the correct behavior of Angular custom elements relied on
the constructor being called (and thus the `injector` property being
initialized). However, some polyfills (e.g. `document-register-element`)
do not call the constructor of custom elements, which resulted in the
`injector` property being undefined and the `NgElementStrategy` failing
to be instantiated.
This commit fixes it by being tolerant to the `injector` property being
undefined and falling back to the injector passed to the
`createCustomElement()` config.
NOTE:
We don't have proper tests exercising the situation where the
constructor is not called. For now this is tested using a Google
internal test suite (which is how this issue was caught).
This commit also adds a rudimentary unit test to emulate this situation.
PR Close#36114
PR Close#37226
Previously, if an element started out as a regular `HTMLElement` (not a
Custom Element) and was later upgraded to a Custom Element, any
properties corresponding to component inputs that were set on the
element before upgrading it would not be captured correctly and thus not
reflected on the instantiated component.
This commit fixes it by ensuring that such properties are captured
correctly.
Jira issue: [FW-2006](https://angular-team.atlassian.net/browse/FW-2006)
Fixes#30848Closes#31416
PR Close#36114
PR Close#37226
Previously, the `TestStrategy` `NgElementStrategy` used in
`createCustomElement()` tests was created once and re-used in each test
(due to complications related to how `customElements.register()` works).
As a result, the `TestStrategy` instance's state (e.g. inputs) could be
polluted from previous tests and affect subsequent ones.
This commit ensures the strategy instance is reset before each test.
PR Close#36114
PR Close#37226
Previously, helper modules/components classes were declared even if the
tests were not run (because the environment did not support Custom
Elements for example).
This commit moves the declaration of the helpers inside the `describe()`
block, so they are not declared unnecessarily. This is in preparation of
adding more helpers that need to access variables declared inside the
`describe()` block.
PR Close#36114
PR Close#37226
Previously, we had to check whether `NgElementStrategy` had been
instantiated before accessing it. This was tedious and error prone,
since it was easy to forget to add the check in new call sites.
This commit switches to using a getter, so that the check has to be
performed in one place and is transparent to call sites (including any
future ones).
PR Close#36114
PR Close#37226
`createCustomElements()` creates some getters/setters for properties
corresponding to component inputs that delegate to the
`NgElementStrategy`. However, it is not guaranteed that the element's
`NgElementStrategy` will have been created when these getters/setters
are called, because some polyfills (e.g. `document-register-element`) do
not call the constructor.
Previously, trying to get/set input properties before connecting the
element to the DOM (via `connectedCallback()`) would fail due to
`NgElementStrategy` not being created.
This commit ensures that the `NgElementStrategy` is always created
before used inside the input property getters/setters (similar to how it
is done for other methods of `NgElement`).
Mentioned in https://github.com/angular/angular/pull/31416/files#r300326698.
PR Close#36114
PR Close#37226
Update docs in the micro benchmarks to include:
* How to run with no turbo inlining
* Where to find the profiles in the DevTools
* Best way to debug benchmarks (using the profile_in_browser rather than --inspect-brk)
PR Close#37140
Creates common logging functions at different levels. Allows for providing
logging statements which are actually printed to the console based on the
LOG_LEVEL environment variable.
PR Close#37192
This commit updates the script that checks master and patch branches to ignore features with `dev-infra` scope
while verifying that there are no feature commits in patch branch. It's ok and in fact desirable for dev-infra features to be on the patch branch.
PR Close#37210
The `fw-testing` PullApprove group is really designed to
capture the top level public testing API groups in packages
like `common` and `router`.
The compiler-cli also has some folders that contain the path
segment `testing` but these should not require `fw-testing`
PullApprove approval.
This commit excludes the whole of `compiler-cli` package from
the `fw-testing` group.
PR Close#37220
Previously, the correct behavior of Angular custom elements relied on
the constructor being called (and thus the `injector` property being
initialized). However, some polyfills (e.g. `document-register-element`)
do not call the constructor of custom elements, which resulted in the
`injector` property being undefined and the `NgElementStrategy` failing
to be instantiated.
This commit fixes it by being tolerant to the `injector` property being
undefined and falling back to the injector passed to the
`createCustomElement()` config.
NOTE:
We don't have proper tests exercising the situation where the
constructor is not called. For now this is tested using a Google
internal test suite (which is how this issue was caught).
This commit also adds a rudimentary unit test to emulate this situation.
PR Close#36114
Previously, if an element started out as a regular `HTMLElement` (not a
Custom Element) and was later upgraded to a Custom Element, any
properties corresponding to component inputs that were set on the
element before upgrading it would not be captured correctly and thus not
reflected on the instantiated component.
This commit fixes it by ensuring that such properties are captured
correctly.
Jira issue: [FW-2006](https://angular-team.atlassian.net/browse/FW-2006)
Fixes#30848Closes#31416
PR Close#36114
Previously, the `TestStrategy` `NgElementStrategy` used in
`createCustomElement()` tests was created once and re-used in each test
(due to complications related to how `customElements.register()` works).
As a result, the `TestStrategy` instance's state (e.g. inputs) could be
polluted from previous tests and affect subsequent ones.
This commit ensures the strategy instance is reset before each test.
PR Close#36114
Previously, helper modules/components classes were declared even if the
tests were not run (because the environment did not support Custom
Elements for example).
This commit moves the declaration of the helpers inside the `describe()`
block, so they are not declared unnecessarily. This is in preparation of
adding more helpers that need to access variables declared inside the
`describe()` block.
PR Close#36114
Previously, we had to check whether `NgElementStrategy` had been
instantiated before accessing it. This was tedious and error prone,
since it was easy to forget to add the check in new call sites.
This commit switches to using a getter, so that the check has to be
performed in one place and is transparent to call sites (including any
future ones).
PR Close#36114
`createCustomElements()` creates some getters/setters for properties
corresponding to component inputs that delegate to the
`NgElementStrategy`. However, it is not guaranteed that the element's
`NgElementStrategy` will have been created when these getters/setters
are called, because some polyfills (e.g. `document-register-element`) do
not call the constructor.
Previously, trying to get/set input properties before connecting the
element to the DOM (via `connectedCallback()`) would fail due to
`NgElementStrategy` not being created.
This commit ensures that the `NgElementStrategy` is always created
before used inside the input property getters/setters (similar to how it
is done for other methods of `NgElement`).
Mentioned in https://github.com/angular/angular/pull/31416/files#r300326698.
PR Close#36114
The info about the pw storage is out of date.
We should really just point the reader to a go link, something like go/angular/passwords and keep
the info about secrets there.
PR Close#37212
The TOC at the top refers to an anchor that does not exist.
This change adds the missing anchor while preserving the old one in case someone depends on it.
PR Close#37212
