This patch refactors the interpolation parser to do so iteratively
rather than using a regex. Doing so prepares us for supporting granular
recovery on poorly-formed interpolations, for example when an
interpolation does not terminate (`{{ 1 + 2`) or is not terminated
properly (`{{ 1 + 2 {{ 2 + 3 }}`).
Part of #38596
PR Close#38977
This patch adds support for recovering well-formed (and near-complete)
ASTs for semantically malformed keyed reads and keyed writes. See the
added tests for details on the types of semantics we can now recover;
in particular, notice that some assumptions are made about the form of
a keyed read/write intended by a user. For example, in the malformed
expression `a[1 + = 2`, we assume that the user meant to write a binary
expression for the key of `a`, and assign that key the value `2`. In
particular, we now parse this as `a[1 + <empty expression>] = 2`. There
are some different interpretations that can be made here, but I think
this is reasonable.
The actual changes in the parser code are fairly minimal (a nice
surprise!); the biggest addition is a `writeContext` that marks whether
the `=` operator can serve as a recovery point after error detection.
Part of #38596
PR Close#39004
Previously, when a heading was longer than the Table of Content's (TOC)
width and it had to be wrapped into multiple lines, it was hard to
distinguish the subsequent lines from other TOC entries (i.e. other
headings).
This commit makes it easier to visually distinguish wrapped heading
lines from other headings by reducing the spacing between wrapped lines
of the same heading (making it more obvious that they belong together).
PR Close#39092
Updates to rules_nodejs 2.2.0. This is the first major release in 7 months and includes a number of features as well
as breaking changes.
Release notes: https://github.com/bazelbuild/rules_nodejs/releases/tag/2.0.0
Features of note for angular/angular:
* stdout/stderr/exit code capture; this could be potentially be useful
* TypeScript (ts_project); a simpler tsc rule that ts_library that can be used in the repo where ts_library is too
heavy weight
Breaking changes of note for angular/angular:
* loading custom rules from npm packages: `ts_library` is no longer loaded from `@npm_bazel_typescript//:index.bzl`
(which no longer exists) but is now loaded from `@npm//@bazel/typescript:index.bzl`
* with the loading changes above, `load("@npm//:install_bazel_dependencies.bzl", "install_bazel_dependencies")` is
no longer needed in the WORKSPACE which also means that yarn_install does not need to run unless building/testing
a target that depends on @npm. In angular/angular this is a minor improvement as almost everything depends on @npm.
* @angular/bazel package is also updated in this PR to support the new load location; Angular + Bazel users that
require it for ng_package (ng_module is no longer needed in OSS with Angular 10) will need to load from
`@npm//@angular/bazel:index.bzl`. I investigated if it was possible to maintain backward compatability for the old
load location `@npm_angular_bazel` but it is not since the package itself needs to be updated to load from
`@npm//@bazel/typescript:index.bzl` instead of `@npm_bazel_typescript//:index.bzl` as it depends on ts_library
internals for ng_module.
* runfiles.resolve will now throw instead of returning undefined to match behavior of node require
Other changes in angular/angular:
* integration/bazel has been updated to use both ng_module and ts_libary with use_angular_plugin=true.
The latter is the recommended way for rules_nodejs users to compile Angular 10 with Ivy. Bazel + Angular ViewEngine is
supported with @angular/bazel <= 9.0.5 and Angular <= 8. There is still Angular ViewEngine example on rules_nodejs
https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular_view_engine on these older versions but users
that want to update to Angular 10 and are on Bazel must switch to Ivy and at that point ts_library with
use_angular_plugin=true is more performant that ng_module. Angular example in rules_nodejs is configured this way
as well: https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular. As an aside, we also have an
example of building Angular 10 with architect() rule directly instead of using ts_library with angular plugin:
https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular_bazel_architect.
NB: ng_module is still required for angular/angular repository as it still builds ViewEngine & @angular/bazel
also provides the ng_package rule. ng_module can be removed in the future if ViewEngine is no longer needed in
angular repo.
* JSModuleInfo provider added to ng_module. this is for forward compat for future rules_nodejs versions.
@josephperrott, this touches `packages/bazel/src/external.bzl` which will make the sync to g3 non-trivial.
PR Close#37727
This commit adds a new command to the `ng-dev` suite, which verifies that the NgBot YAML config is
correct. It also adds this command to the `lint` CircleCI job so that we execute this check while
running CI.
This should help prevent syntax errors similar to the one introduced in:
393ce5574b
PR Close#39071
This commit adds some TODO comments in `tslint.json` regardling rules
that need to be enabled or removed to more closely align `tslint.json`
with the one generated by the latest Angular CLI for new apps.
Updating these rules generates a lot of linting failures, so fixing
them is outside the scope of this PR.
PR Close#39018
This commit removes the `only-arrow-functions: false` tslint rule to
more closely align `tslint.json` with the one generated by the latest
Angular CLI for new apps.
PR Close#39018
This commit updates the `object-literal-key-quotes` tslint rule to more
closely align `tslint.json` with the one generated by the latest Angular
CLI for new apps.
PR Close#39018
This commit removes the `no-string-literal: false` tslint rule to
more closely align `tslint.json` with the one generated by the latest
Angular CLI for new apps.
PR Close#39018
This commit enables the `no-redundant-jsdoc` tslint rule to more closely
align `tslint.json` with the one generated by the latest Angular CLI for
new apps.
PR Close#39018
This commit re-organizes the `tslint.json` configuration file to more
closely align with the one generated by the latest Angular CLI for new
apps. This makes it easier to see the difference with new CLI versions
in the future and keep our `tslint.json` up-to-date (while keeping our
own rules).
NOTE:
This commit only re-orders rules and removes redundant ones. It does not
change the linting behavior.
PR Close#39018
Issue triage _currently_ requires a component to be set and one of the following to be true for an issue to be
considered triaged:
* Marked as a bug _and_ has a severity _and_ has a frequency
* Mark as a feature
* Marked as a refactor
* Marked as a discussion
* Marked as "confusing"
* Marked as "use-case"
This PR changes the rules so that (in addition to the component), triage
requires:
* A priority label (P0 through P5)
* Marked as a feature
* Marked as a discussion
Triage may also apply additional, optional info labels to issues.
[This document outlines the new priority
scheme](https://docs.google.com/document/d/1mN2zWsr1pxChSTHC7UkOgl4PhhuoFONtG_zcMWeqLwA/preview).
While this PR is focused on issue triage and not PR triage, I have
changed the PR section triage to remove reference to the "effort: *" and
"risk: *" labels. Looking through recent PRs, Kapunahele is the only
person applying these, so it's clear that this bit is no longer widely
practiced.
This is just one step in the always-ongoing process of managing GitHub
labels. More adjustments will come over time. In writing this PR, I have
already unearthed a few more areas that can be polished in follow-ups.
PR Close#38932
In certain circumstances (errors during component constructor) the router outlet may not be activated before
redirecting to a new route. If the new route requires running guards and resolvers the current logic will throw
when accessing outlet.component due to an isActivated check within the property getter. This update brings the
logic inline with deactivateRouterAndItsChildren, namely checking outlet.isActivated before trying to access
outlet.component.
Fixes#39030
PR Close#39049
These free standing functions rely upon the "current" `FileSystem`,
but it is safer to explicitly pass the `FileSystem` into functions or
classes that need it.
Fixes#38711
PR Close#39006
These free standing functions rely upon the "current" `FileSystem`,
but it is safer to explicitly pass the `FileSystem` into functions or
classes that need it.
PR Close#39006
This commit updates ngbot config to avoid requesting google3 presubmit for the changes in
the `packages/compiler-cli/src/ngtsc/sourcemaps` folder (which is not synced into google3).
PR Close#39035
Previously, when updating the dependency versions in
`aio/tools/examples/shared/package.json` (which contains all
dependencies used in docs examples projects), one had to manually go
through all boilerplate directories and update the `package.json` files
with the same versions.
This commit simplifies this task by automating it via a Node.js script.
PR Close#38992
When updating the boilerplate for CLI-based docs examples, one needed to
install dependencies inside the
`aio/tools/examples/shared/boilerplate/cli/` directory, which resulted
in a `node_modules/` directory and a `yarn.lock` file. These were not
supposed to be part of the boilerplate, so they had to be manually
removed after the boilerplate was updated.
This commit simplifies the workflow by allowing boilerplate files to be
ignored (both by git and the `example-boilerplate.js` script) via a
`.gitignore` file. This way, it is no longer necessary to manually
remove the unneeded directories/files.
PR Close#38992
This commit updates the Markdown files inside the `aio/tools/` directory
to contain one sentence per line in order to be consistent with how
Markdown files are formatted in the rest of the repo.
PR Close#38992
`NodeInjector` is store in expando as a list of values in an array. The
offset constant into the array have been brought together into a single
`NodeInjectorOffset` enum with better documentation explaining their usage.
PR Close#38707
This change makes `getPreviousOrParentTNode` return `TNode|null` (rather
than just `TNode`) which is more reflective of the reality. The
`getPreviousOrParentTNode` can be `null` upon entering the `LView`.
PR Close#38707
`TNodeType.View` was created to support inline views. That feature did
not materialize and we have since removed the instructions for it, leave
an unneeded `TNodeType.View` which was still used in a very
inconsistent way. This change no longer created `TNodeType.View` (and
there will be a follow up chang to completely remove it.)
Also simplified the mental model so that `LView[HOST]`/`LView[T_HOST]`
always point to the insertion location of the `LView`.
PR Close#38707
Host `TNode` was passed into `getOrCreateTNode` just so that we can
compute weather or not we are a root node. This was needed because
`previousOrParentTNode` could have `TNode` from `TView` other then
current `TView`. This is confusing mental model. Previous change
ensured that `previousOrParentTNode` must always be part of `TView`,
which enabled this change to remove the unneeded argument.
PR Close#38707
`previousOrParentTNode` stores current `TNode`. Due to inconsistent
implementation the value stored would sometimes belong to the current
`TView` and sometimes to the parent. We have extra logic which accounts
for it. A better solution is to just ensure that `previousOrParentTNode`
always belongs to current `TNode`. This simplifies the mental model
and cleans up some code.
PR Close#38707
