the commit causes lint on upstream/master to fail. We need to fix the script to not check too many past commits, but that
will have to wait until a follow up PR.
PR Close#35017
In #34955, we switched to Node.js v12 on master and 9.0.x. This causes
the `aio_monitoring_job` CI job (which checks out files from the stable
branch; currently 8.2.x) to start failing yarn's engines check (since
the 8.2.x branch expects Node.js version <11).
Example failure: https://circleci.com/gh/angular/angular/602499
Since the job is expected to run with files from both the stable and the
master branches (and since the version of Node.js is not important
here), this commit uses the `--ignore-engines` option to prevent
failures due to Node.js version mismatch.
NOTE:
Typically, the stable and master branch are on the same Node.js version,
because related PRs land on both master and the patch branch. One
exception is during RC periods, when the stable branch is different than
the patch branch. These periods are usually short, but in the case of
9.0.0 the period has lasted several months causing the CI environments
between master and the stable branch to get significantly out-of-sync.
PR Close#35004
* Added a /tools/saucelabs/sauce-service.sh script that manages the sauce-connect as a service which is used by the karma-saucelabs.js wrapper to start the service.
* Added /tools/saucelabs/README.md that covers the details of SauceLabs karma testing with Bazel.
PR Close#34769
earlier p sigly was used to define a paragraph element which was not clear what we want to refer changed it to paragrapg element for better understanding
Fixes#34922
PR Close#34927
This condition is being removed as it currently is failing to work as
expected with pullapprove at the moment. The plan/expectation is that
after a bit of troubleshooting, we will be able to add in the condition
once more. Removing the condition actually returns us to the same
state we were in with CODEOWNERS in which draft PRs are also assigned
reviews.
PR Close#35012
We are migrating to PullApprove for our PR review management in an attempt
to allow for more granular and equitable code review assignments across the
team. Currently this migration is equivalent in the review assignments
it will create. Once stable, our expectation is that we will be able to
take advantage of PullApproves additional features for things like staged
reviews.
PR Close#34814
The message now gives concrete advice to developers who
experience the error due to running multiple simultaneous builds
via webpack.
Fixes#35000
PR Close#35001
This commit adds support for completions of properties on `$event`
variables in bound outputs.
This is the second major PR to support completions for `$event`
variables (https://github.com/angular/vscode-ng-language-service/issues/531).
The final completion support that must be provided is for `$event`
variables in bindings targeting DOM events, like `(click)`.
PR Close#34570
This commit makes `findOutputBinding` a utility function for the
language service, which will be used by the `expression_diagnostics`
module in #34570. Keeping the function in `locate_symbol` results in a
circular dependency between `expression_diagnostics` and
`locate_symbol`.
PR Close#34997
We had some logic for generating and passing in the `elIndex` parameter into the `hostBindings` function, but it wasn't actually being used for anything. The only place left that had a reference to it was the `StylingBuilder` and it only stored it without referencing it again.
PR Close#34969
Component's decorator handler exposes `preanalyze` method to preload async resources (templates, stylesheets). The logic in preanalysis phase may throw `FatalDiagnosticError` errors that contain useful information regarding the origin of the problem. However these errors from preanalysis phase were not intercepted in TraitCompiler, resulting in just error message text be displayed. This commit updates the logic to handle FatalDiagnosticError and transform it before throwing, so that the result diagnostic errors contain the necessary info.
PR Close#34801
For the structural directive, the 'path' will contain multiple `BoundDirectivePropertyAst` which depends on the number of directive property in the attribute value(e.g. '*ngFor="let item of []; trackBy: test;"', it has 2 `BoundDirectivePropertyAst`, 'ngForOf' and 'ngForTrackBy').
PR Close#34847
This update increases the main bundle by ~0.6KB
payload size snapshot:
456581 Jan 24 22:07 dist/main-es2015.38c39f92eab2fcc8c835.js
541321 Jan 24 22:06 dist/main-es5.38c39f92eab2fcc8c835.js
52487 Jan 24 22:05 dist/polyfills-es2015.b374ef3555a700a97add.js
146193 Jan 24 22:05 dist/polyfills-es5.c7dc569e6c646e42fade.js
2987 Jan 24 22:05 dist/runtime-es2015.29be4028399ae41ba25e.js
2981 Jan 24 22:05 dist/runtime-es5.29be4028399ae41ba25e.js
PR Close#34966
the test failures most likely result from the babel updates in the previous commit.
it does look like we lost the file path from the error message, which is something that we
should follow up no in a separate change.
PR Close#34974
Previously we relied on this package being hoisted and available, which is error prone and it would
be just a matter of time before the build would break due rehoisting of deps upon future npm package.json
changes.
PR Close#34974
It's not clear how this ever worked (npm hoisting is a suspect though), but this dep is required because
one of the tests imports @babel/generator in the ts sources.
The lack of this dep is breaking builds on the master branch.
More discussion about this issue on Slack: https://angular-team.slack.com/archives/C07DT5M6V/p1579934766007500
PR Close#34974
Previously, browser_util would export a mutable `let` binding that was
initialized as a side-effect of `BrowserDetection.setup()`. This change
refactors the mutable binding into a `const` binding that is immediately
initialized in its initialized.
This is functionally equivalent, but makes it easier for module
optimizers such as Closure Compiler to track down side effects and prune
modules. It is also arguably cleaner to read (no worries about later
changes to the apparently mutable but effectively const binding).
PR Close#34207
PR Close#34960
Previously, create_angular_testing_module would export a mutable `let`
binding. The binding is already exporting using an accessor function
though, so the export on the let variable seems like an accidental
oversight.
This is functionally equivalent, but makes it easier for module
optimizers such as Closure Compiler to track down side effects and prune
modules.
PR Close#34232
PR Close#34960
As part of the effort to tighten the API surface of
`TypeScriptServiceHost` in preparation for the migration to Ivy, I realized
some recently added APIs are not strictly needed.
They can be safely removed without sacrificing functionality.
This allows us to clean up the code, especially in the implementation of
QuickInfo, where the `TypeScriptServiceHost` is leaked outside of the
`LanguageService` class.
This refactoring also cleans up some duplicate code where the QuickInfo
object is generated. The logic is now consolidated into a simple
`createQuickInfo` method shared across two different implementations.
PR Close#34941
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
This change introduces several functions for manipulating items in an array in an efficient (binary search) way.
- `arraySplice` a faster version of `Array.splice()`.
- `arrayInsert` a faster version of `Array.splice(index, 0, value)`.
- `arrayInsert2` a faster version of `Array.splice(index, 0, value1, value2)`.
- `arrayInsertSorted` a way to insert a value into sorted list.
- `arrayRemoveSorted` a way to remove a value from a sorted list.
- `arrayIndexOfSorted` a way to find a value in a sorted list.
- `ArrayMap` Efficient implementation of `Map` as an `Array`.
- `arrayMapSet`, `arrayMapGet`, `arrayMapIndexOf`, and `arrayMapDelete` for manipulating `ArrayMap`s.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
PR Close#34616
This change reverts https://github.com/angular/angular/pull/28711
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
The change removes the fact that `NgStyle`/`NgClass` is special and colaborates with the `[style]`/`[class]` to merge its styles. By reverting to old behavior we have better backwards compatiblity since it is no longer treated special and simply overwrites the styles (same as VE)
PR Close#34616
Compiler keeps track of number of slots (`vars`) which are needed for binding instructions. Normally each binding instructions allocates a single slot in the `LView` but styling instructions need to allocate two slots.
PR Close#34616
The `computeStaticStyling` will be used for computing static styling value during `firstCreatePass`.
The function takes into account static styling from the template as well as from the host bindings. The host bindings need to be merged in front of the template so that they have the correct priority.
PR Closes#34418
Parsing styling is now simplified to be used like so:
```
for (let i = parseStyle(text); i <= 0; i = parseStyleNext(text, i)) {
const key = getLastParsedKey();
const value = getLastParsedValue();
...
}
```
This change makes it easier to invoke the parser from other locations in the system without paying the cost of creating and iterating over `Map` of styles.
PR Closes#34418
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
