Cleans up outdated comments in the shared dev-infra Git
utilities. We also export the Graphql client for consistency
as we expose the `GithubClient` and `GitClient` too.
PR Close#38656
We initially added logic for determining active release trains into
the merge script. Given we now build more tools that rely on this
information, we move the logic into a more general "versioning" folder
that can contain common logic following the versioning document for the
Angular organization.
PR Close#38656
Introduces a new configuration for the `ng-dev release` command. This
configuration will be the source of truth for all release packages
and how they can be built.
Additionally, in a temporary manner where each project has its own
way of generating the changelog, the changelog generation can be
configured. This will be removed in the future when there is
canonical changelog generation in the dev-infra shared package.
PR Close#38656
Exposes logic for dealing with LTS branches, so that the release
tool can re-use it for cutting LTS patch releases.
Eventually, we can move all of this logic to a more dedicated
folder instead of having it inside the merge folder.
PR Close#38656
Instead of maintaining multiple interface for grouping
owner name and repo name, we expose a shared interface
describing a Github repository.
One unfortunate downside is that the GraphQL Github
and Rest API diverge slightly with the key for the
repository name. i.e. rest uses `repo` for the name
of a repository, while GraphQL uses `name` for the name.
If that would be consistent, we could use the rest operator
to pass a repository to the Octokit REST or GraphQL API. This
does not work, so we have a small manual overhead as seen
in the `branches.ts` file.
PR Close#38656
The dev-infra package is currently built with Bazel and ts-node.
In Bazel, the shared tsconfig from the `packages/` folder is used.
This means that the code is built in strict mode, but IDEs and
ts-node do not know about the strictness. This is because the tsconfig
is part of the `packages` folder and not accessible from the
dev-infra package. We fix this by adding an IDE and ts-node specific
tsconfig to the dev-infra package.
This helps with spotting compilation failures before building
with Bazel / waiting for CI to check build state.
PR Close#38656
Previously, the logic for determing the active release trains did not
return the resolved version of a release train. With the publish script
being created, we need this information and can just pass it through,
so that we do not need to fetch and parse the package.json of given
branches multiple times.
PR Close#38656
Sets up the NPM `ora` package in the project and in dev-infra,
so that we can show progress spinners when needed. This is useful
in the publish release script when we wait for a pull request to
be merged.
PR Close#38656
The git client respects the `SpawnSyncOptions` when a command
is executed. Currently it does not hide the command info
messages when commands are run in silent mode.
We fix this as part of this commit, so that the command info
is only printed to `debug` if `stdio` is set to `ignore`.
Additonally, the github token is made public so that it can be
used by commands if other repositories like forks are targeted.
PR Close#38656
Instead of repeating the logic for adding the github token to
a repository git url, we add a shared function for automatically
computing the URls with token.
Additionally, URLs for updating/generating tokens have been moved
to a dedicated file in the `utils` folder. Also while being at it,
the yargs github token helper is also moved into the dedicated
Git/Github related util folder.
PR Close#38656
Prior to this change, each invocation of `loadStandardTestFiles` would
load the necessary files from disk. This function is typically called
at the top-level of a test module in order to share the result across
tests. The `//packages/compiler-cli/test/ngtsc` target has 8 modules
where this call occurs, each loading their own copy of
`node_modules/typescript` which is ~60MB in size, so the memory overhead
used to be significant. This commit loads the individual packages into
a standalone `Folder` and mounts this folder into the filesystem of
standard test files, such that all file contents are no longer
duplicated in memory.
PR Close#38909
Some compiler tests take a long time to run, even using multiple
executors. A profiling session revealed that most time is spent in
parsing source files, especially the default libraries are expensive to
parse.
The default library files are constant across all tests, so this commit
introduces a shared cache of parsed source files of the default
libraries. This achieves a significant improvement for several targets
on my machine:
//packages/compiler-cli/test/compliance: from 23s to 5s.
//packages/compiler-cli/test/ngtsc: from 115s to 11s.
Note that the number of shards for the compliance tests has been halved,
as the extra shards no longer provide any speedup.
PR Close#38909
Previously, the `backoff()` example did not work as intended. More
specifically, the `range(1, maxTries)` observable would complete
immediately after emitting the `maxTries`th value, causing the overall
observable to also complete. As a result, it would only make
`maxTries - 1` attempts to recover from an error. More importantly, the
outer observable would complete successfully instead of erroring.
This commit fixes the `backoff()` operator by ensuring it makes exactly
`maxTries` attempts to recover and it propagates the actual error to the
outer observable.
The test for this change is added in the next commit.
PR Close#38896
Close#38334.
zone.js provides a flag DISABLE_WRAPPING_UNCAUGHT_PROMISE_REJECTION to let zone.js
throw the original error instead of wrap it when uncaught promise rejection found.
But the rejection value could be anything includes primitive value such as number.
In that case, we should not attach any additional properties to the value.
PR Close#38476
In Ivy, template type-checking has 3 modes: basic, full, and strict. The
primary difference between basic and full modes is that basic mode only
checks the top-level template, whereas full mode descends into nested
templates (embedded views like ngIfs and ngFors). Ivy applies this approach
to all of its template type-checking, including the DOM schema checks which
validate whether an element is a valid component/directive or not.
View Engine has both the basic and the full mode, with the same distinction.
However in View Engine, DOM schema checks happen for the full template even
in the basic mode.
Ivy's behavior here is technically a "fix" as it does not make sense for
some checks to apply to the full template and others only to the top-level
view. However, since g3 relies exclusively on the basic mode of checking and
developers there are used to DOM checks applying throughout their template,
this commit re-enables the nested schema checks even in basic mode only in
g3. This is done by enabling the checks only when Closure Compiler
annotations are requested.
Outside of g3, it's recommended that applications use at least the full mode
of checking (controlled by the `fullTemplateTypeCheck` flag), and ideally
the strict mode (`strictTemplates`).
PR Close#38943
In bootstrapping.md the default AppModule has some extra imports which are not generated
by default in ng new removed those extra imports and add them at appropriate place.
PR Close#38549
The logic for computing identifiers, specifically for bound attributes
can be simplified by using the value span of the binding rather than the
source span.
PR Close#38899
This commit removes the scrollbar styles so that the default
styles in the browser render. This widens the webkit scroll bar.
This makes it easier to grab the scrollbar using assistive
technology and devices, and provides a wider target for
those who have dexterity issues. By removing these styles,
We will no longer have to maintain custom scrollbars specific to WebKit
and they will be accessible by default.
PR Close#38852
Changed several period into colons to be consistent throughout the doc.
Changed "If don't add the interface..." to "If _you_ don't add the interface..."
PR Close#38900
This commit updates ngbot config to avoid requesting google3 presubmit for the changes in
the `packages/zone.js/dist` folder (which is not synced into google3).
PR Close#38901
Currently, when we call jsonp method without importing HttpClientJsonpModule, an error message appears saying
'Attempted to construct Jsonp request without JsonpClientModule installed.' instance of 'Attempted to
construct Jsonp request without HttpClientJsonpModule installed.'
PR Close#38756
This commit adds a logic to ouput the number of new and fixed cycles after running circular
dependency checker. This information is useful to better understand an impact of changes in case
the number of new/fixed cycles is relatively big.
PR Close#38805
This commit updates several import statements in the core package to decrease the number of
cycles detected by the dependency checker tool.
PR Close#38805
Close#38795
in the XMLHttpRequest patch, when get `readystatechange` event, zone.js try to
invoke `load` event listener first, then call `invokeTask` to finish the
`XMLHttpRequest::send` macroTask, but if the request failed because the
server can not be reached, the `load` event listener will not be invoked,
so the `invokeTask` of the `XMLHttpRequest::send` will not be triggered either,
so we will have a non finished macroTask there which will make the Zone
not stable, also memory leak.
So in this PR, if the `XMLHttpRequest.status = 0` when we get the `readystatechange`
event, that means something wents wrong before we reached the server, we need to
invoke the task to finish the macroTask.
PR Close#38836
During the merge process, all validations have already been completed so git commit
hooks can be safely skipped. This additionally, prevents errors from occuring which
would be caused the commit hooks executing, such as when yarn updates and then yarn
commands are unable to run within the same process.
PR Close#38888
In #38666 we changed how ngcc deals with type expressions, where it
would now always emit the original type expression into the generated
code as a "local" type value reference instead of synthesizing new
imports using an "imported" type value reference. This was done as a fix
to properly deal with renamed symbols, however it turns out that the
compiler has special handling for certain imported symbols, e.g.
`ChangeDetectorRef` from `@angular/core`. The "local" type value
reference prevented this special logic from being hit, resulting in
incorrect compilation of pipe factories.
This commit fixes the issue by manually inspecting the import of the
type expression, in order to return an "imported" type value reference.
By manually inspecting the import we continue to handle renamed symbols.
Fixes#38883
PR Close#38892
Common AST formats such as TS and Babel do not use a separate
node for comments, but instead attach comments to other AST nodes.
Previously this was worked around in TS by creating a `NotEmittedStatement`
AST node to attach the comment to. But Babel does not have this facility,
so it will not be a viable approach for the linker.
This commit refactors the output AST, to remove the `CommentStmt` and
`JSDocCommentStmt` nodes. Instead statements have a collection of
`leadingComments` that are rendered/attached to the final AST nodes
when being translated or printed.
PR Close#38811
Because PhantomJS has been deprecated since March 2018, and `newEvent`
is very confusing for newcomers that read the testing documentation,
we remove it entirely, and instead assume most, if not all, newcomers
will run tests in Chrome as it is the default.
Fixes#23370
PR Close#37251
