This commits changes how clients are added in `SwTestHarness`, so that
the behavior in tests closer mimics what would happen in an actual
ServiceWorker.
It also removes auto-adding clients when calling `clients.get()`, which
could hide bugs related to non-existing clients.
PR Close#23625
The service injected is `ValueService`, however the name of the variable
does not reflect that. It's actually confusing since it's the name of
the `class` being created.
PR Close#23315
This commit configures a periodic job to be run on CircleCI, performing several
checks against the actual apps deployed to production (https://angular.io) and
staging (https://next.angular.io).
Fixes#21942
PR Close#23093
This commit also waits for the app to stabilize, before starting to
check for ServiceWorker updates. This avoids setting up a long timeout,
which would prevent the app from stabilizing and thus cause issues with
Protractor.
PR Close#23093
Under some circumstances (possibly related to opening Chrome DevTools),
requests are made with `cache: 'only-if-cached'` and `mode: 'no-cors'`.
These request will eventually fail, because `only-if-cached` is only
allowed to be used with `mode: 'same-origin'`.
This is likely a bug in Chrome DevTools.
This commit avoids errors related to such requests by not handling them.
Fixes#22362
PR Close#22883
Previously, when trying to fetch `ngsw.json` (e.g. during
`checkForUpdate()`) while either the client or the server were offline,
the ServiceWorker would enter a degrade mode, where only existing
clients would be served. This essentially meant that the ServiceWorker
didn't work offline.
This commit fixes it by differentiating offline errors and not entering
degraded mode. The ServiceWorker will remain in the current mode until
connectivity to the server is restored.
Fixes#21636
PR Close#22883
I added this option for demos, so that it would be easier to see a graphviz graph of the dependency structure without all the node_modules edges.
However, `ibazel` picks up this option as well, and means it doesn't trigger on changes that only appear through an implicit dependency.
PR Close#22912
'remove' method not removing url from state.map
'accessed' method not removing 'previous' reference from existing node when it becomes the head
Fixes#22218Fixes#22768
PR Close#22769
Changes would not propagate to a value in downgraded component in case you had two-way binding and listening to a value-change, e.g. [(value)]="value" (value-change)="fetch()"
Closes#22734
PR Close#22772
Works around an issue with TypeScript 2.6 and 2.7 that causes
the tranformer emit to emit incorrect escapes for css string
literals.
Fixes: #22774
PR Close#22776
The `Logger.error()` method now only accepts a single `Error` parameter
and passes this through to the error handler.
This allows the error handler to serialize the error more accurately.
The various places that use `Logger.error()` have been updated.
See #21943#issuecomment-370230047
PR Close#22713
docs(aio): change HttpClientModule reference to HttpClient
docs(aio): capitalize Http to HTTP
docs(aio): fix typo mistake in 'universal' guide
docs(aio): gets rid of the parentheses and the "e.g." in 'universal' guide
PR Close#21984
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on RFC 3986 and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* URI fragments will now serialize the same as query strings
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
Fixes: #10280
PR Close#22337
When I enabled bazel remote caching, I also switched to running
buildifier and skylint from the package.json script, which builds them
from head. With remote caching, we do get cache hits for these, but
looking up the action inputs actually takes quite a bit of time since we
have to first fetch the remote repository, then do loading and
analysis, then read the inputs to determine the cache key.
It's more important to keep the lint job fast, so I'm reverting that
part of the change for now. We can experiment with building them from
head in a less critical repo.
PR Close#22526
The new version of `dgeni-packages/typescript` no longer strips
out "namespaces" from types, which was part of the problem of
not autolinking correctly to `HttpEventType.Response`.
Another part of the problem was that we did not include `.`
characters when matching potential code blocks for auto-linking,
which precluded properties of enums from being linked.
Finally, members we not being given a `path` property, which is
needed to effectively autolink to them. This is now set in
the `simplifyMemberAnchors` processor.
Closes#21375
PR Close#22494
The `exampleMap` needs to hold an hash object for each
of the `collectExamples.exampleFolders` paths.
Previously these hash objects were only created if there
was actually an example file the hash's respective
example folder. This could cause crashes during
`yarn docs-watch` (and so also `yarn sync-and-serve`)
if no examples were read in for a particular run of
the doc-gen.
PR Close#22502
Previously, when a downgraded component was destroyed in a way that did
not trigger the `$destroy` event on the element (e.g. when a parent
element was removed from the DOM by Angular, not AngularJS), the
`ComponentRef` was not destroyed and unregistered.
This commit fixes it by listening for the `$destroy` event on both the
element and the scope.
Fixes#22392
PR Close#22400
The h3 element is overflowing over its surrounding div element. Modified padding-right to align consistently with the remainder of div contents.
fixes: #22407
PR Close#22431
The h3 element is overflowing over its surrounding div element. Modified padding-left to align consistently with the remainder of div contents.
fixes: #22407
PR Close#22431
* Add correct mapping from camel case to kebab case for CSS style
names
* Remove internal CSS methods in favor of native Domino APIs
Fixes#19235
PR Close#22263
- updates tests
- heavy prose revisions
- uses HttpClient (with angular-in-memory-web-api)
- test HeroService using `HttpClientTestingModule`
- scrub away most By.CSS
- fake async observable with `asyncData()`
- extensive Twain work
- different take on retryWhen
- remove app barrels (& systemjs.extras) which troubled plunker/systemjs
- add dummy export const to hero.ts (plunkr/systemjs fails w/o it)
- shrink and re-organize TOC
- add marble testing package and tests
- demonstrate the "no beforeEach()" test coding style
- add section on Http service testing
- prepare for stackblitz
- confirm works in plunker except excluded marble test
- add tests for avoidFile class feature of CodeExampleComponent
PR Close#20697
The function provided by `ngUpgrade` as `parentBoundTranscludeFn` when
upgrading a component with transclusion, will break in AngularJS v1.5.8+
if no transclusion content is provided. The reason is that AngularJS
will try to destroy the transclusion scope (which would not be needed
any more). But since the transcluded content comes from Angular, not
AngularJS, there is no transclusion scope to destroy.
This commit fixes it by providing a dummy scope object with a no-op
`$destroy()` method.
Fixes#22175
PR Close#22167
Previously, having a `=` binding on an upgraded components would result
in setting the corresponding property to an EventEmitter function. This
should only happen for `&` bindings.
This commit rstrores the correct behavior.
Note:
The issue was only present in the dynamic version of `ngUpgrade`. The
static version worked as expected.
The error did not show up in tests, because in AngularJS v1.5.x a
function would be serialized to an empty string in interpolations, thus
making them indistinguishable from uninitialized properties (in the
view). The serialization behavior changed in AngularJS v1.6.x, making
the errors visible.
PR Close#22167
`packages/upgrade/static/src` is anymlink to `packages/upgrade/src`.
Still, using the correct paths (e.g. using
`@angular/upgrade/static/src/...` for `@angula/upgrade/static` specs
ensures that the module loader (e.g. SystemJS) can map the imports to
the same instances.
PR Close#22167
It's currently broken on CircleCI because of a TLS change made by GitHub.
This is okay as a permanent change, we don't really want bazel to fetch a full git history.
Fixes#22405
PR Close#22406
Change recommendation on using attributes for components since there are use cases including the use of <button mat-button> in MD
Closes#19401.
PR Close#22074
Note, the reason this commit removes `firebase-tools` is:
1) firebase-tools has an optional dependency on
https://www.npmjs.com/package/@google-cloud/functions-emulator
2) yarn's `--ignore-optional` doesn't work for transitive deps, so
there's no way to yarn install without getting that functions-emulator
package
3) functions-emulator has a transitive dep on `grpc`
4) the version of `grpc` we get has `BUILD` files and no `WORKSPACE`
file so it always breaks `bazel build ...`
It could be solved by any of:
1) remove firebase-tools - this is what I did
2) fix yarn so you can omit optional deps of a transitive dep
3) make functions-emulator depend transitively on a more recent `grpc`
version
4) patch `grpc` after install by doing an `rm` command in our
postinstall or something
In its place we must install protobufjs. This is needed by the
ngc-wrapped test, which needs jasmine as well as bazel's worker mode
dependencies, and therefore cannot simply rely on
node_modules =
"@build_bazel_rules_typescript_tsc_wrapped_deps//:node_modules"
PR Close#22168
This saves us an executor on Travis.
Note that we still do a bazel build on travis when we run the integration tests under e2e_2.
We expect that CircleCI is the only place we'll ever consume bazel-built artifacts.
PR Close#22170
This should cause Bazel builds to be incremental, only re-building parts of Angular affected by changes since the last build.
It also fixes a potential version skew, where CI was running the Bazel linter binaries in the ngcontainer docker image, but developers built them using the versions in WORKSPACE
PR Close#21784
The AsyncPipe type signature was changed to allow
deferred creation of promises and observalbes that
is supported by the implementation by allowing
`Promise<T>|null|undefined` and by allowing
`Observable<T>|null|undefined`.
PR Close#22169
Same fix as e70d7a2a7c
This is because the CompilerOptions needs to have directoryExists undefined in order to get the google3 behavior,
so we have to set the property outside the constructor.
Fixes#21872
PR Close#21876
Both Firefox and Safari are vulnerable to XSS if we use an inert document
created via `document.implementation.createHTMLDocument()`.
Now we check for those vulnerabilities and then use a DOMParser or XHR
strategy if needed.
Further the platform-server has its own library for parsing HTML, so we
sniff for that (by checking whether DOMParser exists) and fall back to
the standard strategy.
Thanks to @cure53 for the heads up on this issue.
PR Close#17019
We have a number of observables that have `catch` handlers to recover
from errors without causing the stream to close, and breaking the app.
We also have some `try ... catch` blocks for synchronous code for a
similar reason.
In these cases we conventionally then call `logger.error` in the catch
handler. We are interested in these errors so we are going to capture them
by reporting them to Google Analytics via the new `ReportingErrorHandler`.
PR Close#22011
This is a basic implementation of error logging using the limited
facilities provided by Google Analytics.
Errors within the Angular app itself will be handled by a new
`ReportingErrorHandler` service, which overrides and extends the
built-in `ErrorHandler`.
Further, errors outside the app, which arrive at `window.onerror`
will also be reported to Google Analytics.
Closes#21943
PR Close#22011
During the initial load of the page (probably until the icon styles are
loaded and/or applied), the `.header-link` element is wider, pushing the
heading text slightly to the right (for a brief moment).
This commit prevents this slight shift by explicitly setting the width
for the `.header-link` element.
PR Close#21695
For the initial rendering, where there is no transition from a previous
visual state to a new one, animations make little sense. The page should
load with as few reflows as possible.
Similarly, while we typically want to defer updating the SideNav state
(e.g. opened/closed) until the "leaving" document is animated out of the
page, on the initial rendering (where there is no "leaving" document)
this leads to the SideNav flashing (from closed to open).
These worked as expected before, but several parts (mostly related to
documents with a SideNav) have been accidentally broken in recent
commits (e.g. when upgraded to latest material, or enabled animations
for DocViewer transitions, etc.).
This commit restores the previous behavior by ensuring that (on the
initial rendering) the SideNav state is updated as soon as possible and
that there will be no animations when:
1. The hamburger button appears.
2. The SideNav is opened.
3. The main section's width is adjusted to make room for the SideNav.
PR Close#21695
Previously, the mocked `HttpClient` was synchronous in tests (despite
the actual `HttpClient` being asynchronous). Although we use observables
(which generally make the implementation sync/async-agnostic), the fact
that we have no control over when Angular updates/checks views and calls
lifecycle hooks resulted in different behavior (and errors) in tests
(with sync `HttpClient`) vs actual app (with async `HttpClient`).
This commit ensures that the behavior (and errors) are consistent
between the tests and the actual app by making the mocked `HttpClient`
asynchronous.
PR Close#21695
Navigating to a document while trying to expand or collapse a sub-menu
is undesirable and confusing. All sub-menu toggles should have no other
effect than expanding/collapsing the corresponding sub-menu.
PR Close#21695
Previously, the emitEvent flag was only checked when emitting on the current control.
Thus, if the control was part of a hierarchy, events were emitted on the parent and the childrens.
This fixes the issue by properly passing the emitEvent flag to both parent and childrens.
Fixes#12366
PR Close#21018
Name of selector in ForbiddenName example is not consistent with Validator class nor Html selector example. Added the selector name 'appForbiddenName' as an alias name for the input of the Validator class, and updated the view accordingly.
Fixes: #20206
PR Close#20464
Previously searching for `compose` did not include `Validators`
in the search results because we were not including all the
`static` members of API docs in the index.
PR Close#21988
These tags are removed when the doc is ready and valid, but this will
allow us to block indexing in the case that the Angular app fails to
bootstrap or load the document for some non-404 reason.
This should get around the problem with hardcoded tags. See
c3fb820473Closes#21941
PR Close#21992
This will prevent the confusing errors for first time users who
try to generate the docs with `yarn docs` and are told there are
dangling links.
Closes#21944
PR Close#21970
This has two benefits:
* it prepares the way for the API docs update, which need parameter docs
* it doesn't incorrectly report dangling links for non-latin anchors
Closes#21306
PR Close#21802
Previously, an interceptor attempting to inject HttpClient directly
would receive a circular dependency error, as HttpClient was
constructed via a factory which injected the interceptor instances.
Users want to inject HttpClient into interceptors to make supporting
requests (ex: to retrieve an authentication token). Currently this is
only possible by injecting the Injector and using it to resolve
HttpClient at request time.
Either HttpClient or the user has to deal specially with the circular
dependency. This change moves that responsibility into HttpClient
itself. By utilizing a new class HttpInterceptingHandler which lazily
loads the set of interceptors at request time, it's possible to inject
HttpClient directly into interceptors as construction of HttpClient no
longer requires the interceptor chain to be constructed.
Fixes#18224.
PR Close#19809
Running `yarn start` (which watches the `src/` directory) and
`yarn docs-watch` (which cleans up files in `src/generated/api/`) often
results in `ENOTEMPTY` errors.
This commit solves it by ensuring that `yarn docs` has been completed
before running `yarn start`.
PR Close#21806
The 2.6 version of TypeScript's `resolveModuleName` started to
require paths passed to be separated by '/' instead of being
able to handle '\'.
`ngc` and `ng` already do this transformation.
Fixes: #21811
PR Close#21812
This is a more defensive approach to ensure that references to
ParamInheritanceType from the published declarations do not cause
compilation errors when compiling Angular from the published packages.
Fixes#21456
PR Close#21773
Since we specify `bottom: 0`, specifying the height is unnecessary and
leads to wrong height (unless updated) on narrow screens where the
topbar height is decreased.
Partly addresses #21520.
PR Close#21538
The CLI app is now checked in, rather than generated dynamically with
`ng new`. This loses some assertion power, but gains hermeticity.
It also checks in lock files for all integration tests, avoiding
floating version numbers.
We'll need another place to integration test between changes in
the various repositories - but the angular/angular PR-blocking status
is not the right place to do this.
PR Close#21555
Currently, `shimCssText` only keep `/*# sourceMappingUrl ... */` comments and strip `/*# sourceURL ... */` comments. So, Chrome can't find the source maps for component style(that's created in new `style` tags)
PR Close#16088
Also, remove `plnkr.json` for `service-worker-getting-started` guide,
since it is not used and ServiceWorker cannot work correctly in
plnkr/stackblitz anyway (e.g. no build step to re-compute hashes).
A zipper might be useful and can be added in a subsequent PR, but it is
currently broken (e.g. no dependency on `@angular/service-worker`).
PR Close#20165
- Update tooling to support revised testing guide (PR #20697).
- Require jasmine upgrade for examples that use marble testing.
- Copy `cli/package.json` to `testing/` and add `jasmine-marbles`.
- Resolve merge conflicts created by `NgModules` guides.
PR Close#20165
Folding errors passed calls prevented the static reflector from
begin able to ignore errors in annotations it doesn't know as
the call to the unknown annotation was elided from the metadata.
Fixes: #21273
PR Close#21708
The `<meta name="robots" content="noindex">` tag is used
to indicate to search engine crawlers that they should not index
the current page. This is set dynamically by the the document
viewer component to ensure that 404 and other erroring pages
are not added to the search index.
This relies upon the idea that the crawling bot will run the JS
and wait to see if this meta tag has been added or not.
Since we believe that the `googebot` will do this, we also
pre-emptively add a hard-coded noindex tag specifically for
this bot, so that if anything else fails in bootstrapping the app,
the failed page will not be added to the index.
Closes#21317
PR Close#21665
Adding the binding name to the error message recieved by the user gives
extra context on what exactly changed. The tests are also updated to
reflect the new error message.
PR Close#20352
- Improve `WrappedValue` by adding `unwrap` symetrical to `wrap`.
- remove dead code - `ValueUnwrapper`
The property `wrapped` is an implementation details and should never be accessed
directly - use `unwrap(wrappedValue)`. Will change to protected in Angular 7.
PR Close#20997
Previously the generated files were cleaned out before
doc-gen began (via a yarn pre-script). This can cause a
race condition in the CLI server, which prevents the new
generated files from being picked up.
Now we delay the cleaning until the last minute to ensure
that they ar still picked up by the webpack server.
PR Close#21540
This commit fixes a bug whereby the caches are not cleared when the
program changes. This subsequently produces the incorrect error of
'Component ... is not included in a module ...'.
PR Close#19405
PR Close#21337
-rw-r--r-- 1 iminar eng 72498 Jan 9 22:20 dist/0.0d2802b63e9f4f4615cd.chunk.js
-rw-r--r-- 1 iminar eng 14872 Jan 9 22:20 dist/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1558 Jan 9 22:20 dist/inline.cb4b7a639193fc489d3b.bundle.js
-rw-r--r-- 1 iminar eng 454654 Jan 9 22:20 dist/main.b65f32ffc92e075e64e0.bundle.js
-rw-r--r-- 1 iminar eng 40264 Jan 9 22:20 dist/polyfills.87edf5d695f14a29bf91.bundle.js
-rw-r--r-- 1 iminar eng 54001 Jan 9 22:20 dist/worker-basic.min.js
PR Close#21351
Cache reference resolution for external references as finding
the declaration of a symbol is expensive and does not change
for a program once created.
This resolves a signficant performance regression in the langauge
service.
PR Close#21359
This helps ensure we use the same tsconfig.json file for all compilations.
Next steps are to make it the same tsconfig.json file used by the editor
PR Close#20964
This should fix the size regression spotted via the previous commit.
-rw-r--r-- 1 iminar eng 72498 Jan 8 00:03 dist/0.86a7a08f7866e6cdc36f.chunk.js
-rw-r--r-- 1 iminar eng 14872 Jan 8 00:03 dist/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1558 Jan 8 00:03 dist/inline.7722895d8c844f710bcd.bundle.js
-rw-r--r-- 1 iminar eng 453905 Jan 8 00:03 dist/main.faff0e2da95443f759f5.bundle.js
-rw-r--r-- 1 iminar eng 40264 Jan 8 00:03 dist/polyfills.87edf5d695f14a29bf91.bundle.js
-rw-r--r-- 1 iminar eng 54001 Jan 8 00:03 dist/worker-basic.min.js
PR Close#21350
This change introduces a size regression of 9kb for main.js :-(
I filed an issue for this: https://github.com/angular/angular-cli/issues/9108
-rw-r--r-- 1 iminar eng 72546 Jan 5 19:27 dist.cli-1.6.3/0.86a7a08f7866e6cdc36f.chunk.js
-rw-r--r-- 1 iminar eng 14893 Jan 5 19:27 dist.cli-1.6.3/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1558 Jan 5 19:27 dist.cli-1.6.3/inline.7722895d8c844f710bcd.bundle.js
-rw-r--r-- 1 iminar eng 466484 Jan 5 19:27 dist.cli-1.6.3/main.faff0e2da95443f759f5.bundle.js
-rw-r--r-- 1 iminar eng 40363 Jan 5 19:27 dist.cli-1.6.3/polyfills.87edf5d695f14a29bf91.bundle.js
-rw-r--r-- 1 iminar eng 54001 Jan 5 19:27 dist.cli-1.6.3/worker-basic.min.js
PR Close#21350
When the SW fetches URLs listed in a manifest with hashes, it checks
the content hash against the manifest to make sure it has the correct
version of the URL. In the event of a mismatch, the SW is supposed to
consider the manifest invalid, and avoid using it. There are 3 cases
to consider by which this can happen.
Case 1: during the initial SW installation, a manifest is activated
without waiting for every URL to be fully loaded. In the background,
every prefetch URL listed by the manifest is requested and cached.
One such prefetch request could fail the hash test, and cause the
manifest to be treated as invalid. In such a case, the SW should
enter a state of EXISTING_CLIENTS_ONLY, as the latest manifest is
invalid.
This case works today.
Case 2: during the initial SW installation, as in Case 1, a manifest
is activated without waiting for each URL to fully load. However,
it's possible that the application could request a URL with a bad
hash before background initialization tries to load that URL. This
happens if, for example, the application has a broken index.html.
In this case, the SW should enter a state of EXISTING_CLIENTS_ONLY,
and serve the request from the network instead.
What happens today is that the internal error escapes the SW and
is returned as a rejected Promise to respondWith(), causing a
browser-level error that the site cannot be loaded, breaking the
site.
This change allows the SW to detect the error and enter the correct
state, falling back on the network if needed.
Case 3: during checkForUpdate(), the SW will try to fully cache the
new update before making it the latest version. Failure here is
complicated - if the page fails to load due to transient network
conditions (timeouts, 500s, etc), then it makes sense to continue
serving the existing cached version, and attempt to activate the
update on the next cycle.
If the page fails due to non-transient conditions though (400 error,
hash mismatch, etc), then the SW should consider the updated
manifest invalid, and enter a state of EXISTING_CLIENTS_ONLY.
Currently, all errors are treated as transient.
This change causes the SW to treat all errors during updates as
non-transient, which can cause the SW to unnecessarily enter a
safe mode. A future change can allow the SW to remain in normal mode
if the error is provably transient.
PR Close#21288
# the g3 status will be added to your pull requests if they include files that match the patterns
g3Status:
# set to true to disable
disabled:false
# the name of the status
context:"google3"
# text to show when the status is pending
pendingDesc:"Googler: test this change in google3 http://go/angular-g3sync"
# text to show when the status is success
successDesc:"Does not affect google3"
# list of patterns to check for the files changed by the PR
# this list must be manually kept in sync with google3/third_party/javascript/angular2/copy.bara.sky
include:
- "BUILD.bazel"
- "LICENSE"
- "WORKSPACE"
- "modules/**"
- "packages/**"
# list of patterns to ignore for the files changed by the PR
exclude:
- "packages/language-service/**"
- "**/.gitignore"
- "**/.gitkeep"
# comment that will be added to a PR when there is a conflict, leave empty or set to false to disable
mergeConflictComment:"Hi @{{PRAuthor}}! This PR has merge conflicts due to recent upstream merges.
\nPlease help to unblock it by resolving these conflicts. Thanks!"
# label to monitor
mergeLabel:"PR action: merge"
# list of checks that will determine if the merge label can be added
checks:
# whether the PR shouldn't have a conflict with the base branch
noConflict:true
# list of labels that a PR needs to have, checked with a regexp (e.g. "PR target:" will work for the label "PR target: master")
requiredLabels:
- "PR target: *"
- "cla: yes"
# list of labels that a PR shouldn't have, checked after the required labels with a regexp
forbiddenLabels:
- "PR target: TBD"
- "PR action: cleanup"
- "PR action: review"
- "PR state: blocked"
- "cla: no"
# list of PR statuses that need to be successful
requiredStatuses:
- "continuous-integration/travis-ci/pr"
- "code-review/pullapprove"
- "ci/circleci: build"
- "ci/circleci: lint"
# the comment that will be added when the merge label is added despite failing checks, leave empty or set to false to disable
# {{MERGE_LABEL}} will be replaced by the value of the mergeLabel option
# {{PLACEHOLDER}} will be replaced by the list of failing checks
mergeRemovedComment:"I see that you just added the `{{MERGE_LABEL}}` label, but the following checks are still failing:
\n{{PLACEHOLDER}}
\n
\n**If you want your PR to be merged, it has to pass all the CI checks.**
\n
\nIf you can't get the PR to a green state due to flakes or broken master, please try rebasing to master and/or restarting the CI job. If that fails and you believe that the issue is not due to your change, please contact the caretaker and ask for help."
# options for the triage plugin
triage:
# number of the milestone to apply when the issue is triaged
defaultMilestone:82,
# arrays of labels that determine if an issue is triaged
* **common:** properly take className changes into account ([#21937](https://github.com/angular/angular/issues/21937)) ([54e9108](https://github.com/angular/angular/commit/54e9108)), closes [#21932](https://github.com/angular/angular/issues/21932)
* **compiler:** fix support for html-like text in translatable attributes ([#23053](https://github.com/angular/angular/issues/23053)) ([4f7c369](https://github.com/angular/angular/commit/4f7c369))
* **forms:** improve error message for invalid value accessors ([#22731](https://github.com/angular/angular/issues/22731)) ([dd61595](https://github.com/angular/angular/commit/dd61595))
* **service-worker:** add badge to NOTIFICATION_OPTION_NAMES ([#23241](https://github.com/angular/angular/issues/23241)) ([7b23983](https://github.com/angular/angular/commit/7b23983)), closes [#23196](https://github.com/angular/angular/issues/23196)
* **service-worker:** do not enter degraded mode when offline ([#22883](https://github.com/angular/angular/issues/22883)) ([ae9c25f](https://github.com/angular/angular/commit/ae9c25f)), closes [#21636](https://github.com/angular/angular/issues/21636)
* **platform-server:** add styles to elements correctly ([#22527](https://github.com/angular/angular/issues/22527)) ([fc6dfc2](https://github.com/angular/angular/commit/fc6dfc2))
* **router:** correct over-encoding of URL fragment ([#22687](https://github.com/angular/angular/issues/22687)) ([86517f2](https://github.com/angular/angular/commit/86517f2))
* **router:** fix URL serialization so special characters are only encoded where needed ([#22337](https://github.com/angular/angular/issues/22337)) ([789a47e](https://github.com/angular/angular/commit/789a47e)), closes [#10280](https://github.com/angular/angular/issues/10280)
* **common:** then and else template might be set to null ([#22298](https://github.com/angular/angular/issues/22298)) ([af6a056](https://github.com/angular/angular/commit/af6a056))
* **compiler-cli:** add missing entry point to package, update tsickle ([#22295](https://github.com/angular/angular/issues/22295)) ([c5418c7](https://github.com/angular/angular/commit/c5418c7))
* **core:** properly handle function without prototype in reflector ([#22284](https://github.com/angular/angular/issues/22284)) ([5ec38f2](https://github.com/angular/angular/commit/5ec38f2)), closes [#19978](https://github.com/angular/angular/issues/19978)
* **core:** support metadata reflection for native class types ([#22356](https://github.com/angular/angular/issues/22356)) ([ee91de9](https://github.com/angular/angular/commit/ee91de9)), closes [#21731](https://github.com/angular/angular/issues/21731)
* **compiler:** make unary plus operator consistent to JavaScript ([#22154](https://github.com/angular/angular/issues/22154)) ([1b8ea10](https://github.com/angular/angular/commit/1b8ea10)), closes [#22089](https://github.com/angular/angular/issues/22089)
* **core:** add stacktrace in log when error during cleanup component in TestBed ([#22162](https://github.com/angular/angular/issues/22162)) ([c4f841f](https://github.com/angular/angular/commit/c4f841f))
* **core:** ensure initial value of QueryList length ([#21980](https://github.com/angular/angular/issues/21980)) ([#21982](https://github.com/angular/angular/issues/21982)) ([47b73fd](https://github.com/angular/angular/commit/47b73fd)), closes [#21980](https://github.com/angular/angular/issues/21980)
* **core:** use appropriate inert document strategy for Firefox & Safari ([#17019](https://github.com/angular/angular/issues/17019)) ([47b71d9](https://github.com/angular/angular/commit/47b71d9))
* **forms:** prevent event emission on enable/disable when emitEvent is false ([#12366](https://github.com/angular/angular/issues/12366)) ([#21018](https://github.com/angular/angular/issues/21018)) ([56b9591](https://github.com/angular/angular/commit/56b9591))
* **language-service:** correct instructions to install the language service ([#22000](https://github.com/angular/angular/issues/22000)) ([0b23573](https://github.com/angular/angular/commit/0b23573))
* **platform-browser:** support 0/false/null values in transfer_state ([#22179](https://github.com/angular/angular/issues/22179)) ([da6ab91](https://github.com/angular/angular/commit/da6ab91))
* **common:** don't convert null to a string when flushing a mock request ([#21417](https://github.com/angular/angular/issues/21417)) ([c4fb696](https://github.com/angular/angular/commit/c4fb696)), closes [#20744](https://github.com/angular/angular/issues/20744)
* **core:** fix [#20582](https://github.com/angular/angular/issues/20582), don't need to wrap zone in location change listener ([#22007](https://github.com/angular/angular/issues/22007)) ([ce51ea9](https://github.com/angular/angular/commit/ce51ea9))
* **core:** fix proper propagation of subscriptions in EventEmitter ([#22016](https://github.com/angular/angular/issues/22016)) ([c6645e7](https://github.com/angular/angular/commit/c6645e7)), closes [#21999](https://github.com/angular/angular/issues/21999)
* **core:** should check Zone existance when scheduleMicroTask ([#20656](https://github.com/angular/angular/issues/20656)) ([aa9ba7f](https://github.com/angular/angular/commit/aa9ba7f))
* **common:** generate closure-locale data file with exported plural functions ([#21873](https://github.com/angular/angular/issues/21873)) ([c2f5ed5](https://github.com/angular/angular/commit/c2f5ed5)), closes [#21870](https://github.com/angular/angular/issues/21870)
* **core:** fix retrieving the binding name when an expression changes ([#21814](https://github.com/angular/angular/issues/21814)) ([81d64d6](https://github.com/angular/angular/commit/81d64d6)), closes [#21735](https://github.com/angular/angular/issues/21735) [#21788](https://github.com/angular/angular/issues/21788)
* **forms:** allow FormBuilder to create controls with any formState type ([#20917](https://github.com/angular/angular/issues/20917)) ([56f3e18](https://github.com/angular/angular/commit/56f3e18)), closes [#20368](https://github.com/angular/angular/issues/20368)
* **forms:** inserting and removing controls should work in re-bound form arrays ([#21822](https://github.com/angular/angular/issues/21822)) ([fad99cc](https://github.com/angular/angular/commit/fad99cc)), closes [#21501](https://github.com/angular/angular/issues/21501)
* **language-service:** ensure correct paths are passed to TypeScript ([#21812](https://github.com/angular/angular/issues/21812)) ([250c8da](https://github.com/angular/angular/commit/250c8da))
* **common:** A null value should remove the style on IE ([#21679](https://github.com/angular/angular/issues/21679)) ([c12ea3a](https://github.com/angular/angular/commit/c12ea3a)), closes [#21064](https://github.com/angular/angular/issues/21064)
* **common:** don't remove special characters when extracting CLDR data ([#21626](https://github.com/angular/angular/issues/21626)) ([a62c186](https://github.com/angular/angular/commit/a62c186))
* **common:** extract plural function from i18n locale data files for TS 2.6 ([#21626](https://github.com/angular/angular/issues/21626)) ([71f9eaa](https://github.com/angular/angular/commit/71f9eaa)), closes [#21608](https://github.com/angular/angular/issues/21608)
* **common:** fallback to last defined value for named date and time formats ([#21299](https://github.com/angular/angular/issues/21299)) ([982eb7b](https://github.com/angular/angular/commit/982eb7b)), closes [#21282](https://github.com/angular/angular/issues/21282)
* **compiler:** add support for marker tags in xliff serializers ([#21250](https://github.com/angular/angular/issues/21250)) ([02352bc](https://github.com/angular/angular/commit/02352bc)), closes [#21078](https://github.com/angular/angular/issues/21078)
* **compiler:** fix ICU select messages to use male/female/other ([#21713](https://github.com/angular/angular/issues/21713)) ([8e44577](https://github.com/angular/angular/commit/8e44577))
* **compiler-cli:** do not fold errors past calls in the collector ([#21708](https://github.com/angular/angular/issues/21708)) ([52970c0](https://github.com/angular/angular/commit/52970c0))
* **compiler-cli:** do not lower expressions in non-modules ([#21649](https://github.com/angular/angular/issues/21649)) ([ba4ea82](https://github.com/angular/angular/commit/ba4ea82))
* **router:** don't use ParamsInheritanceStrategy in declarations ([#21574](https://github.com/angular/angular/issues/21574)) ([8b3fbb5](https://github.com/angular/angular/commit/8b3fbb5)), closes [#21456](https://github.com/angular/angular/issues/21456)
* **animations:** fix increment/decrement aliases example ([#18323](https://github.com/angular/angular/issues/18323)) ([48c1898](https://github.com/angular/angular/commit/48c1898))
* **benchpress:** should still support selenium_webdriver <3.6.0([#21477](https://github.com/angular/angular/issues/21477))([3c6a506](https://github.com/angular/angular/commit/3c6a506))
* **benchpress:** work around missing events from Chrome 63 ([#21396](https://github.com/angular/angular/issues/21396)) ([fa03ae1](https://github.com/angular/angular/commit/fa03ae1))
* **common:** export currencies via `getCurrencySymbol` ([#20983](https://github.com/angular/angular/issues/20983)) ([fecf768](https://github.com/angular/angular/commit/fecf768))
Note: Due to an animation fix back in 5.1.1 ([c2b3792](https://github.com/angular/angular/commit/c2b3792a3b5fa5215fe2ef7e0ac6511086ffe4c1)) which allows for nested :leave queries to work within animation sequences, all elements that are dynamically inserted (*ngIf, *ngFor, etc…) now contain the special CSS class: “ng-star-inserted”. This may cause failures within unit tests if there are any assertions that match against element.className directly. (An easy fix for this is to match using a regular expression instead of asserting the className string directly.)
As contributors and maintainers of the Angular project, we pledge to respect everyone who contributes by posting issues, updating documentation, submitting pull requests, providing feedback in comments, and any other activities.
Communication through any of Angular's channels (GitHub, Gitter, IRC, mailing lists, Google+, Twitter, etc.) must be constructive and never resort to personal attacks, trolling, public or private harassment, insults, or other unprofessional conduct.
We promise to extend courtesy and respect to everyone involved in this project regardless of gender, gender identity, sexual orientation, disability, age, race, ethnicity, religion, or level of experience. We expect anyone contributing to the Angular project to do the same.
If any member of the community violates this code of conduct, the maintainers of the Angular project may take action, removing issues, comments, and PRs or blocking accounts as deemed appropriate.
If you are subject to or witness unacceptable behavior, or have any other concerns, please email us at [conduct@angular.io](mailto:conduct@angular.io).
@ -51,7 +51,7 @@ and help you to craft the change so that it is successfully accepted into the pr
Before you submit an issue, please search the issue tracker, maybe an issue for your problem already exists and the discussion might inform you of workarounds readily available.
We want to fix all the issues as soon as possible, but before fixing a bug we need to reproduce and confirm it. In order to reproduce bugs we will systematically ask you to provide a minimal reproduction scenario using http://plnkr.co. Having a live, reproducible scenario gives us wealth of important information without going back & forth to you with additional questions like:
We want to fix all the issues as soon as possible, but before fixing a bug we need to reproduce and confirm it. In order to reproduce bugs, we will systematically ask you to provide a minimal reproduction scenario using http://plnkr.co. Having a live, reproducible scenario gives us a wealth of important information without going back & forth to you with additional questions like:
- version of Angular used
- 3rd-party libraries and their versions
@ -61,7 +61,7 @@ A minimal reproduce scenario using http://plnkr.co/ allows us to quickly confirm
We will be insisting on a minimal reproduce scenario in order to save maintainers time and ultimately be able to fix more bugs. Interestingly, from our experience users often find coding problems themselves while preparing a minimal plunk. We understand that sometimes it might be hard to extract essentials bits of code from a larger code-base but we really need to isolate the problem before we can fix it.
Unfortunately we are not able to investigate / fix bugs without a minimal reproduction, so if we don't hear back from you we are going to close an issue that don't have enough info to be reproduced.
Unfortunately, we are not able to investigate / fix bugs without a minimal reproduction, so if we don't hear back from you we are going to close an issue that doesn't have enough info to be reproduced.
You can file new issues by filling out our [new issue form](https://github.com/angular/angular/issues/new).
@ -72,7 +72,7 @@ Before you submit your Pull Request (PR) consider the following guidelines:
1. Search [GitHub](https://github.com/angular/angular/pulls) for an open or closed PR
that relates to your submission. You don't want to duplicate effort.
We cannot accept code without this. Make sure you sign with the primary email address of the Git identity that has been granted access to the Angular repository.
1. Fork the angular/angular repo.
1. Make your changes in a new git branch:
@ -173,12 +173,12 @@ The **header** is mandatory and the **scope** of the header is optional.
Any line of the commit message cannot be longer 100 characters! This allows the message to be easier
to read on GitHub as well as in various git tools.
Footer should contain a [closing reference to an issue](https://help.github.com/articles/closing-issues-via-commit-messages/) if any.
The footer should contain a [closing reference to an issue](https://help.github.com/articles/closing-issues-via-commit-messages/) if any.
Samples: (even more [samples](https://github.com/angular/angular/commits/master))
```
docs(changelog): update changelog to beta.5
docs(changelog): update changelog to beta.5
```
```
fix(release): need to depend on latest rxjs and zone.js
@ -203,7 +203,7 @@ Must be one of the following:
* **test**: Adding missing tests or correcting existing tests
### Scope
The scope should be the name of the npm package affected (as perceived by person reading changelog generated from commit messages.
The scope should be the name of the npm package affected (as perceived by the person reading the changelog generated from commit messages.
The following is the list of supported scopes:
@ -232,10 +232,10 @@ There are currently a few exceptions to the "use package name" rule:
* none/empty string: useful for `style`, `test` and `refactor` changes that are done across all packages (e.g. `style: add missing semicolons`)
### Subject
The subject contains succinct description of the change:
The subject contains a succinct description of the change:
* use the imperative, present tense: "change" not "changed" nor "changes"
* don't capitalize first letter
* don't capitalize the first letter
* no dot (.) at the end
### Body
@ -259,6 +259,19 @@ changes to be accepted, the CLA must be signed. It's a quick process, we promise
* For corporations we'll need you to
[print, sign and one of scan+email, fax or mail the form][corporate-cla].
<hr>
If you have more than one Git identity, you must make sure that you sign the CLA using the primary email address associated with the ID that has been granted access to the Angular repository. Git identities can be associated with more than one email address, and only one is primary. Here are some links to help you sort out multiple Git identities and email addresses:
Note that if you have more than one Git identity, it is important to verify that you are logged in with the same ID with which you signed the CLA, before you commit changes. If not, your PR will fail the CLA check.
@ -4,7 +4,7 @@ Everything in this folder is part of the documentation project. This includes
* the web site for displaying the documentation
* the dgeni configuration for converting source files to rendered files that can be viewed in the web site.
* the tooling for setting up examples for development; and generating plunkers and zip files from the examples.
* the tooling for setting up examples for development; and generating live-example and zip files from the examples.
## Developer tasks
@ -13,7 +13,7 @@ You should run all these tasks from the `angular/aio` folder.
Here are the most important tasks you might need to use:
*`yarn` - install all the dependencies.
*`yarn setup` - install all the dependencies, boilerplate, plunkers, zips and run dgeni on the docs.
*`yarn setup` - install all the dependencies, boilerplate, stackblitz, zips and run dgeni on the docs.
*`yarn setup-local` - same as `setup`, but use the locally built Angular packages for aio and docs examples boilerplate.
*`yarn build` - create a production build of the application (after installing dependencies, boilerplate, etc).
@ -32,7 +32,7 @@ Here are the most important tasks you might need to use:
*`yarn boilerplate:add` - generate all the boilerplate code for the examples, so that they can be run locally. Add the option `--local` to use your local version of Angular contained in the "dist" folder.
*`yarn boilerplate:remove` - remove all the boilerplate code that was added via `yarn boilerplate:add`.
*`yarn generate-plunkers` - generate the plunker files that are used by the `live-example` tags in the docs.
*`yarn generate-stackblitz` - generate the stackblitz files that are used by the `live-example` tags in the docs.
*`yarn generate-zips` - generate the zip files from the examples. Zip available via the `live-example` tags in the docs.
*`yarn example-e2e` - run all e2e tests for examples
@ -68,6 +68,11 @@ The content is written in markdown.
All other content is written using markdown in text files, located in the `angular/aio/content` folder.
More specifically, there are sub-folders that contain particular types of content: guides, tutorial and marketing.
* **Code examples**: code examples need to be testable to ensure their accuracy.
Also, our examples have a specific look and feel and allow the user to copy the source code. For larger
examples they are rendered in a tabbed interface (e.g. template, HTML, and TypeScript on separate
tabs). Additionally, some are live examples, which provide links where the code can be edited, executed, and/or downloaded. For details on working with code examples, please read the [Code snippets](https://angular.io/guide/docs-style-guide#code-snippets), [Source code markup](https://angular.io/guide/docs-style-guide#source-code-markup), and [Live examples](https://angular.io/guide/docs-style-guide#live-examples) pages of the [Authors Style Guide](https://angular.io/guide/docs-style-guide).
We use the [dgeni](https://github.com/angular/dgeni) tool to convert these files into docs that can be viewed in the doc-viewer.
The [Authors Style Guide](https://angular.io/guide/docs-style-guide) prescribes guidelines for
@ -100,8 +105,7 @@ The general setup is as follows:
* Open a terminal, ensure the dependencies are installed; run an initial doc generation; then start the doc-viewer:
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
