build(docs-infra): use pinned dependencies when possible in ng-packages-installer (#28510)

Previously, `ng-packages-installer` would replace the version ranges for
all dependencies that were peer dependencies of an Angular package with
the version range used in the Angular package. This effectively meant
that the pinned version (from `yarn.lock`) for that dependency was
ignored (even if the pinned version satisfied the new version range).

This commit reduces non-determinism in CI jobs using the locally built
Angular packages by always using pinned versions of dependencies for
Angular package peer dependencies if possible.

For example, assuming the following versions for the RxJS dependency:

- **aio/package.json**: `rxjs: ^6.3.0`
- **aio/yarn.lock**: `rxjs@^6.3.0: 6.3.3`
- **@angular/core#peerDependencies**: `rxjs: ^6.0.0`

...the following versions would be used with `ng-packages-installer`:

- Before this commit:
  - **aio/package.json**: `rxjs: ^6.0.0`
  - **node_modules/rxjs/**: `6.4.0` (latest version satisfying `^6.0.0`)
- After this commit:
  - **aio/package.json**: `rxjs: ^6.3.0`
  - **node_modules/rxjs/**: `6.3.3` (because it satisfies `^6.0.0`)

PR Close #28510

.bazelignore

@@ -1,4 +0,0 @@
-node_modules
-dist
-aio/node_modules
-aio/tools/examples/shared/node_modules

.circleci/README.md

@@ -13,7 +13,7 @@ a GitHub token that enables publishing snapshots.
 
 To create the github_token file, we take this approach:
 - Find the angular-builds:token in http://valentine
-- Go inside the CircleCI default docker image so you use the same version of openssl as we will at runtime: `docker run --rm -it circleci/node:10.12`
+- Go inside the ngcontainer docker image so you use the same version of openssl as we will at runtime: `docker run --rm -it angular/ngcontainer`
 - echo "https://[token]:@github.com" > credentials
 - openssl aes-256-cbc -e -in credentials -out .circleci/github_token -k $KEY
 - If needed, base64-encode the result so you can copy-paste it out of docker: `base64 github_token`

.circleci/bazel.rc

@@ -16,6 +16,22 @@ test --test_tag_filters=-manual
 # (e.g. /etc/bazel.bazelrc vs. tools/bazel.rc)
 build --announce_rc
 
+# Create dist/bin symlink to $(bazel info bazel-bin)
+# We use this when uploading artifacts after the build finishes
+build --symlink_prefix=dist/
+
+# Enable experimental CircleCI bazel remote cache proxy
+# See remote cache documentation in /docs/BAZEL.md
+build --experimental_remote_spawn_cache --remote_rest_cache=http://localhost:7643
+
+# Prevent unstable environment variables from tainting cache keys
+build --experimental_strict_action_env
+
+# Save downloaded repositories such as the go toolchain
+# This directory can then be included in the CircleCI cache
+# It should save time running the first build
+build --experimental_repository_cache=/home/circleci/bazel_repository_cache
+
 # Workaround https://github.com/bazelbuild/bazel/issues/3645
 # Bazel doesn't calculate the memory ceiling correctly when running under Docker.
 # Limit Bazel to consuming resources that fit in CircleCI "xlarge" class
@@ -24,6 +40,3 @@ build --local_resources=14336,8.0,1.0
 
 # Retry in the event of flakes, eg. https://circleci.com/gh/angular/angular/31309
 test --flaky_test_attempts=2
-
-# More details on failures
-build --verbose_failures=true

.circleci/config.yml

@@ -7,120 +7,93 @@
 # To validate changes, use an online parser, eg.
 # http://yaml-online-parser.appspot.com/
 
-# Note that the browser docker image comes with Chrome and Firefox preinstalled. This is just
-# needed for jobs that run tests without Bazel. Bazel runs tests with browsers that will be
-# fetched by the Webtesting rules. Therefore for jobs that run tests with Bazel, we don't need a
-# docker image with browsers pre-installed.
-# **NOTE**: If you change the version of the docker images, also change the `cache_key` suffix.
-var_1: &default_docker_image circleci/node:10.12
-var_2: &browsers_docker_image circleci/node:10.12-browsers
-var_3: &cache_key v2-angular-{{ .Branch }}-{{ checksum "yarn.lock" }}-node-10.12
+# Variables
+
+## IMPORTANT
+# If you change the `docker_image` version, also change the `cache_key` suffix and the version of
+# `com_github_bazelbuild_buildtools` in the `/WORKSPACE` file.
+var_1: &docker_image angular/ngcontainer:0.6.0
+var_2: &cache_key v2-angular-{{ .Branch }}-{{ checksum "yarn.lock" }}-0.6.0
 
 # Define common ENV vars
-var_4: &define_env_vars
-  run:
-    name: Define environment variables
-    command: ./.circleci/env.sh
+var_3: &define_env_vars
+  run: echo "export PROJECT_ROOT=$(pwd)" >> $BASH_ENV
 
-var_5: &setup_bazel_remote_execution
+# See remote cache documentation in /docs/BAZEL.md
+var_4: &setup-bazel-remote-cache
   run:
-    name: "Setup bazel RBE remote execution"
-    command: openssl aes-256-cbc -d -in .circleci/gcp_token -k "$CI_REPO_NAME" -out /home/circleci/.gcp_credentials && echo "export GOOGLE_APPLICATION_CREDENTIALS=/home/circleci/.gcp_credentials" >> $BASH_ENV && sudo bash -c "cat .circleci/rbe-bazel.rc >> /etc/bazel.bazelrc"
+    name: Start up bazel remote cache proxy
+    command: ~/bazel-remote-proxy -backend circleci://
+    background: true
 
 # Settings common to each job
-var_6: &job_defaults
+anchor_1: &job_defaults
   working_directory: ~/ng
   docker:
-  - image: *default_docker_image
+    - image: *docker_image
 
 # After checkout, rebase on top of master.
 # Similar to travis behavior, but not quite the same.
 # See https://discuss.circleci.com/t/1662
-var_7: &post_checkout
-  post: git pull --ff-only origin "refs/pull/${CI_PULL_REQUEST//*pull\//}/merge"
-
-var_8: &yarn_install
-  run:
-    name: Running Yarn install
-    command: yarn install --frozen-lockfile --non-interactive
-
-var_9: &setup_circleci_bazel_config
-  run:
-    name: Setting up CircleCI bazel configuration
-    command: sudo cp .circleci/bazel.rc /etc/bazel.bazelrc
+anchor_2: &post_checkout
+  post: git pull --ff-only origin "refs/pull/${CIRCLE_PULL_REQUEST//*pull\//}/merge"
 
 version: 2
 jobs:
   lint:
     <<: *job_defaults
-    resource_class: xlarge
     steps:
       - checkout:
           <<: *post_checkout
-      - restore_cache:
-          key: *cache_key
-      - *define_env_vars
-      - *setup_circleci_bazel_config
-      - *yarn_install
 
-      - run: 'yarn buildifier -mode=check ||
+      # Check BUILD.bazel formatting before we have a node_modules directory
+      # Then we don't need any exclude pattern to avoid checking those files
+      - run: 'buildifier -mode=check $(find . -type f \( -name "*.bzl" -or -name BUILD.bazel -or -name BUILD \)) ||
               (echo "BUILD files not formatted. Please run ''yarn buildifier''" ; exit 1)'
       # Run the skylark linter to check our Bazel rules
-      - run: 'yarn skylint ||
+      # deprecated-api is disabled because we use actions.new_file(genfiles_dir)
+      # which has no replacement, see https://github.com/bazelbuild/bazel/issues/4858
+      - run: 'find . -type f -name "*.bzl" |
+              xargs java -jar /usr/local/bin/Skylint_deploy.jar --disable-checks=deprecated-api ||
               (echo -e "\n.bzl files have lint errors. Please run ''yarn skylint''"; exit 1)'
 
+      - restore_cache:
+          key: *cache_key
+
+      - run: yarn install --frozen-lockfile --non-interactive
       - run: ./node_modules/.bin/gulp lint
 
   test:
     <<: *job_defaults
     resource_class: xlarge
     steps:
+      - *define_env_vars
       - checkout:
           <<: *post_checkout
-      - restore_cache:
-          key: *cache_key
-      - *define_env_vars
-      - *setup_circleci_bazel_config
-      - *yarn_install
-
-      # Setup remote execution and run RBE-compatible tests.
-      - *setup_bazel_remote_execution
-      - run: yarn bazel test //... --build_tag_filters=-ivy-only --test_tag_filters=-ivy-only,-local
-      # Now run RBE incompatible tests locally.
+      # See remote cache documentation in /docs/BAZEL.md
+      - run: .circleci/setup_cache.sh
       - run: sudo cp .circleci/bazel.rc /etc/bazel.bazelrc
-      - run: yarn bazel test //... --build_tag_filters=-ivy-only,local --test_tag_filters=-ivy-only,local
+      - *setup-bazel-remote-cache
 
-      - save_cache:
-          key: *cache_key
-          paths:
-            - "node_modules"
-            - "~/bazel_repository_cache"
-
-  # Temporary job to test what will happen when we flip the Ivy flag to true
-  test_ivy_aot:
-    <<: *job_defaults
-    resource_class: xlarge
-    steps:
-      - checkout:
-          <<: *post_checkout
       - restore_cache:
           key: *cache_key
-      - *define_env_vars
-      - *setup_circleci_bazel_config
-      - *yarn_install
-      - *setup_bazel_remote_execution
 
-        # We need to explicitly specify the --symlink_prefix option because otherwise we would
-        # not be able to easily find the output bin directory when uploading artifacts for size
-        # measurements.
-      - run: yarn test-ivy-aot //... --symlink_prefix=dist/
+      - run: ls /home/circleci/bazel_repository_cache || true
+      - run: bazel info release
+      - run: bazel run @nodejs//:yarn
+      # Use bazel query so that we explicitly ask for all buildable targets to be built as well
+      # This avoids waiting for the slowest build target to finish before running the first test
+      # See https://github.com/bazelbuild/bazel/issues/4257
+      # NOTE: Angular developers should typically just bazel build //packages/... or bazel test //packages/...
+      - run: bazel query --output=label //... | xargs bazel test --build_tag_filters=-ivy-only --test_tag_filters=-manual,-ivy-only
 
-        # Publish bundle artifacts which will be used to calculate the size change. **Note**: Make
-        # sure that the size plugin from the Angular robot fetches the artifacts from this CircleCI
-        # job (see .github/angular-robot.yml). Additionally any artifacts need to be stored with the
-        # following path format: "{projectName}/{context}/{fileName}". This format is necessary
-        # because otherwise the bot is not able to pick up the artifacts from CircleCI. See:
-        # https://github.com/angular/github-robot/blob/master/functions/src/plugins/size.ts#L392-L394
+      # CircleCI will allow us to go back and view/download these artifacts from past builds.
+      # Also we can use a service like https://buildsize.org/ to automatically track binary size of these artifacts.
+      # The destination keys need be format {projectName}/{context}/{fileName} so that the github-robot can process them for size calculations
+      # projectName should remain consistant to group files
+      # context and fileName can be almost anything (within usual URI rules)
+      # There should only be exactly 2 forward slashes in the path
+      # This is so they're backwards compatiable with the existing data we have on bundle sizes
       - store_artifacts:
           path: dist/bin/packages/core/test/bundling/hello_world/bundle.min.js
           destination: core/hello_world/bundle
@@ -133,131 +106,49 @@ jobs:
       - store_artifacts:
           path: dist/bin/packages/core/test/bundling/todo/bundle.min.js.br
           destination: core/todo/bundle.br
-
-  test_aio:
+      - save_cache:
+          key: *cache_key
+          paths:
+            - "node_modules"
+            - "~/bazel_repository_cache"
+  # Temporary job to test what will happen when we flip the Ivy flag to true
+  test_ivy_jit:
     <<: *job_defaults
-    docker:
-      # Needed because the AIO tests and the PWA score test depend on Chrome being available.
-      - image: *browsers_docker_image
+    resource_class: xlarge
     steps:
+      - *define_env_vars
       - checkout:
           <<: *post_checkout
+      # See remote cache documentation in /docs/BAZEL.md
+      - run: .circleci/setup_cache.sh
+      - run: sudo cp .circleci/bazel.rc /etc/bazel.bazelrc
+      - *setup-bazel-remote-cache
+
       - restore_cache:
           key: *cache_key
-      - *define_env_vars
-        # Build aio
-      - run: yarn --cwd aio build --progress=false
-        # Lint the code
-      - run: yarn --cwd aio lint
-        # Run PWA-score tests
-        # (Run before unit and e2e tests, which destroy the `dist/` directory.)
-      - run: yarn --cwd aio test-pwa-score-localhost $CI_AIO_MIN_PWA_SCORE
-        # Check the bundle sizes.
-        # (Run before unit and e2e tests, which destroy the `dist/` directory.)
-      - run: yarn --cwd aio payload-size
-        # Run unit tests
-      - run: yarn --cwd aio test --watch=false
-        # Run e2e tests
-      - run: yarn --cwd aio e2e
-        # Run unit tests for Firebase redirects
-      - run: yarn --cwd aio redirects-test
 
-  deploy_aio:
+      - run: bazel run @yarn//:yarn
+      - run: bazel query --output=label //... | xargs bazel test --define=compile=jit --build_tag_filters=ivy-jit --test_tag_filters=-manual,ivy-jit
+
+  test_ivy_aot:
     <<: *job_defaults
-    docker:
-    # Needed because before deploying the deploy-production script runs the PWA score tests.
-    - image: *browsers_docker_image
+    resource_class: xlarge
     steps:
+      - *define_env_vars
       - checkout:
           <<: *post_checkout
+      # See remote cache documentation in /docs/BAZEL.md
+      - run: .circleci/setup_cache.sh
+      - run: sudo cp .circleci/bazel.rc /etc/bazel.bazelrc
+      - *setup-bazel-remote-cache
+
       - restore_cache:
           key: *cache_key
-      - *define_env_vars
-        # Deploy angular.io to production (if necessary)
-      - run: setPublicVar CI_STABLE_BRANCH "$(npm info @angular/core dist-tags.latest | sed -r 's/^\s*([0-9]+\.[0-9]+)\.[0-9]+.*$/\1.x/')"
-      - run: yarn --cwd aio deploy-production
 
-  test_aio_local:
-    <<: *job_defaults
-    docker:
-      # Needed because the AIO tests and the PWA score test depend on Chrome being available.
-      - image: *browsers_docker_image
-    steps:
-      - checkout:
-          <<: *post_checkout
-      - restore_cache:
-          key: *cache_key
-      - attach_workspace:
-          at: dist
-      - *define_env_vars
-        # Build aio (with local Angular packages)
-      - run: yarn --cwd aio build-local --progress=false
-        # Run PWA-score tests
-        # (Run before unit and e2e tests, which destroy the `dist/` directory.)
-      - run: yarn --cwd aio test-pwa-score-localhost $CI_AIO_MIN_PWA_SCORE
-        # Run unit tests
-      - run: yarn --cwd aio test --watch=false
-        # Run e2e tests
-      - run: yarn --cwd aio e2e
+      - run: bazel run @yarn//:yarn
+      - run: bazel query --output=label //... | xargs bazel test --define=compile=local --build_tag_filters=ivy-local --test_tag_filters=-manual,ivy-local
 
-  test_aio_tools:
-    <<: *job_defaults
-    steps:
-      - checkout:
-          <<: *post_checkout
-      - restore_cache:
-          key: *cache_key
-      - attach_workspace:
-          at: dist
-      - *define_env_vars
-        # Install
-      - run: yarn --cwd aio install --frozen-lockfile --non-interactive
-      - run: yarn --cwd aio extract-cli-command-docs
-        # Run tools tests
-      - run: yarn --cwd aio tools-test
-      - run: ./aio/aio-builds-setup/scripts/test.sh
-
-  test_docs_examples_0:
-    <<: *job_defaults
-    docker:
-      # Needed because the example e2e tests depend on Chrome.
-      - image: *browsers_docker_image
-    steps:
-      - checkout:
-          <<: *post_checkout
-      - restore_cache:
-          key: *cache_key
-      - attach_workspace:
-          at: dist
-      - *define_env_vars
-        # Install root
-      - *yarn_install
-        # Install aio
-      - run: yarn --cwd aio install --frozen-lockfile --non-interactive
-        # Run examples tests
-      - run: yarn --cwd aio example-e2e --setup --local --shard=0/2
-
-  test_docs_examples_1:
-    <<: *job_defaults
-    docker:
-      # Needed because the example e2e tests depend on Chrome.
-      - image: *browsers_docker_image
-    steps:
-      - checkout:
-          <<: *post_checkout
-      - restore_cache:
-          key: *cache_key
-      - attach_workspace:
-          at: dist
-      - *define_env_vars
-        # Install root
-      - *yarn_install
-        # Install aio
-      - run: yarn --cwd aio install --frozen-lockfile --non-interactive
-        # Run examples tests
-      - run: yarn --cwd aio example-e2e --setup --local --shard=1/2
-
-  # This job should only be run on PR builds, where `CI_PULL_REQUEST` is not `false`.
+  # This job should only be run on PR builds, where `CIRCLE_PR_NUMBER` is defined.
   aio_preview:
     <<: *job_defaults
     environment:
@@ -267,31 +158,28 @@ jobs:
           <<: *post_checkout
       - restore_cache:
           key: *cache_key
-      - *define_env_vars
-      - *yarn_install
-      - run: ./aio/scripts/build-artifacts.sh $AIO_SNAPSHOT_ARTIFACT_PATH $CI_PULL_REQUEST $CI_COMMIT
+      - run: yarn install --frozen-lockfile --non-interactive
+      - run: ./aio/scripts/build-artifacts.sh $AIO_SNAPSHOT_ARTIFACT_PATH $CIRCLE_PR_NUMBER $CIRCLE_SHA1
       - store_artifacts:
           path: *aio_preview_artifact_path
           # The `destination` needs to be kept in synch with the value of
           # `AIO_ARTIFACT_PATH` in `aio/aio-builds-setup/Dockerfile`
           destination: aio/dist/aio-snapshot.tgz
 
-  # This job should only be run on PR builds, where `CI_PULL_REQUEST` is not `false`.
+  # This job should only be run on PR builds, where `CIRCLE_PR_NUMBER` is defined.
   test_aio_preview:
     <<: *job_defaults
-    docker:
-      # Needed because the test-preview script runs e2e tests and the PWA score test with Chrome.
-      - image: *browsers_docker_image
     steps:
       - checkout:
           <<: *post_checkout
       - restore_cache:
           key: *cache_key
-      - *define_env_vars
       - run: yarn install --cwd aio --frozen-lockfile --non-interactive
       - run:
           name: Wait for preview and run tests
-          command: node aio/scripts/test-preview.js $CI_PULL_REQUEST $CI_COMMIT $CI_AIO_MIN_PWA_SCORE
+          command: |
+            source "./scripts/ci/env.sh" print
+            xvfb-run --auto-servernum node aio/scripts/test-preview.js $CIRCLE_PR_NUMBER $CIRCLE_SHA1 $AIO_MIN_PWA_SCORE
 
   # This job exists only for backwards-compatibility with old scripts and tests
   # that rely on the pre-Bazel dist/packages-dist layout.
@@ -304,15 +192,15 @@ jobs:
     <<: *job_defaults
     resource_class: xlarge
     steps:
+      - *define_env_vars
       - checkout:
           <<: *post_checkout
-      - restore_cache:
-          key: *cache_key
-      - *define_env_vars
-      - *setup_circleci_bazel_config
-      - *yarn_install
-      - *setup_bazel_remote_execution
+      # See remote cache documentation in /docs/BAZEL.md
+      - run: .circleci/setup_cache.sh
+      - run: sudo cp .circleci/bazel.rc /etc/bazel.bazelrc
+      - *setup-bazel-remote-cache
 
+      - run: bazel run @nodejs//:yarn
       - run: scripts/build-packages-dist.sh
 
       # Save the npm packages from //packages/... for other workflow jobs to read
@@ -321,7 +209,8 @@ jobs:
           root: dist
           paths:
             - packages-dist
-            - packages-dist-ivy-aot
+            - packages-dist-ivy-jit
+            - packages-dist-ivy-local
 
   # We run the integration tests outside of Bazel for now.
   # They are a separate workflow job so that they can be easily re-run.
@@ -331,41 +220,35 @@ jobs:
   # See comments inside the integration/run_tests.sh script.
   integration_test:
     <<: *job_defaults
-    docker:
-      # Needed because the integration tests expect Chrome to be installed (e.g cli-hello-world)
-      - image: *browsers_docker_image
     # Note: we run Bazel in one of the integration tests, and it can consume >2G
     # of memory. Together with the system under test, this can exhaust the RAM
     # on a 4G worker so we use a larger machine here too.
     resource_class: xlarge
     steps:
+      - *define_env_vars
       - checkout:
           <<: *post_checkout
-      - restore_cache:
-          key: *cache_key
       - attach_workspace:
           at: dist
-      - *define_env_vars
-      - run: ./integration/run_tests.sh
+      - run: xvfb-run --auto-servernum ./integration/run_tests.sh
 
   # This job updates the content of repos like github.com/angular/core-builds
   # for every green build on angular/angular.
   publish_snapshot:
     <<: *job_defaults
     steps:
-      - checkout:
-          <<: *post_checkout
-      - *define_env_vars
       # See below - ideally this job should not trigger for non-upstream builds.
       # But since it does, we have to check this condition.
       - run:
           name: Skip this job for Pull Requests and Fork builds
           # Note, `|| true` on the end makes this step always exit 0
           command: '[[
-              "$CI_PULL_REQUEST" != "false"
-              || "$CI_REPO_OWNER" != "angular"
-              || "$CI_REPO_NAME" != "angular"
+              -v CIRCLE_PR_NUMBER
+              || "$CIRCLE_PROJECT_USERNAME" != "angular"
+              || "$CIRCLE_PROJECT_REPONAME" != "angular"
           ]] && circleci step halt || true'
+      - checkout:
+          <<: *post_checkout
       - attach_workspace:
           at: dist
       # CircleCI has a config setting to force SSH for all github connections
@@ -379,23 +262,16 @@ jobs:
 
   aio_monitoring:
     <<: *job_defaults
-    docker:
-      # This job needs Chrome to be globally installed because the tests run with Protractor
-      # which does not load the browser through the Bazel webtesting rules.
-      - image: *browsers_docker_image
     steps:
       - checkout:
           <<: *post_checkout
       - restore_cache:
           key: *cache_key
-      - *define_env_vars
       - run:
           name: Run tests against the deployed apps
-          command: ./aio/scripts/test-production.sh $CI_AIO_MIN_PWA_SCORE
-      - run:
-          name: Notify caretaker about failure
-          command: 'curl --request POST --header "Content-Type: application/json" --data "{\"text\":\":x: \`$CIRCLE_JOB\` job failed on build $CIRCLE_BUILD_NUM: $CIRCLE_BUILD_URL :scream:\"}" $CI_SECRET_SLACK_CARETAKER_WEBHOOK_URL'
-          when: on_fail
+          command: |
+            source "./scripts/ci/env.sh" print
+            xvfb-run --auto-servernum ./aio/scripts/test-production.sh $AIO_MIN_PWA_SCORE
 
 workflows:
   version: 2
@@ -403,24 +279,9 @@ workflows:
     jobs:
       - lint
       - test
+      - test_ivy_jit
       - test_ivy_aot
       - build-packages-dist
-      - test_aio
-      - deploy_aio:
-          requires:
-            - test_aio
-      - test_aio_local:
-          requires:
-            - build-packages-dist
-      - test_aio_tools:
-          requires:
-            - build-packages-dist
-      - test_docs_examples_0:
-          requires:
-            - build-packages-dist
-      - test_docs_examples_1:
-          requires:
-            - build-packages-dist
       - aio_preview:
           # Only run on PR builds. (There can be no previews for non-PR builds.)
           filters:
@@ -440,12 +301,9 @@ workflows:
           requires:
             # Only publish if tests and integration tests pass
             - test
+            - test_ivy_jit
             - test_ivy_aot
             - integration_test
-            # Only publish if `aio`/`docs` tests using the locally built Angular packages pass
-            - test_aio_local
-            - test_docs_examples_0
-            - test_docs_examples_1
             # Get the artifacts to publish from the build-packages-dist job
             # since the publishing script expects the legacy outputs layout.
             - build-packages-dist
@@ -463,4 +321,4 @@ workflows:
 
 notify:
   webhooks:
-    - url: https://ngbuilds.io/circle-build
+    - url: https://ngbuilds.io/circle-build

.circleci/env-helpers.inc.sh

@@ -1,38 +0,0 @@
-####################################################################################################
-# Helpers for defining environment variables for CircleCI.
-#
-# In CircleCI, each step runs in a new shell. The way to share ENV variables across steps is to
-# export them from `$BASH_ENV`, which is automatically sourced at the beginning of every step (for
-# the default `bash` shell).
-#
-# See also https://circleci.com/docs/2.0/env-vars/#using-bash_env-to-set-environment-variables.
-####################################################################################################
-
-# Set and print an environment variable.
-#
-# Use this function for setting environment variables that are public, i.e. it is OK for them to be
-# visible to anyone through the CI logs.
-#
-# Usage: `setPublicVar <name> <value>`
-function setPublicVar() {
-  setSecretVar $1 $2;
-  echo "$1=$2";
-}
-
-# Set (without printing) an environment variable.
-#
-# Use this function for setting environment variables that are secret, i.e. should not be visible to
-# everyone through the CI logs.
-#
-# Usage: `setSecretVar <name> <value>`
-function setSecretVar() {
-  # WARNING: Secrets (e.g. passwords, access tokens) should NOT be printed.
-  # (Keep original shell options to restore at the end.)
-  local -r originalShellOptions=$(set +o);
-  set +x -eu -o pipefail;
-
-  echo "export $1=\"${2:-}\";" >> $BASH_ENV;
-
-  # Restore original shell options.
-  eval "$originalShellOptions";
-}

.circleci/env.sh

@@ -1,35 +0,0 @@
-#!/usr/bin/env bash
-
-# Load helpers and make them available everywhere (through `$BASH_ENV`).
-readonly envHelpersPath="`dirname $0`/env-helpers.inc.sh";
-source $envHelpersPath;
-echo "source $envHelpersPath;" >> $BASH_ENV;
-
-
-####################################################################################################
-# Define PUBLIC environment variables for CircleCI.
-####################################################################################################
-setPublicVar PROJECT_ROOT "$(pwd)";
-setPublicVar CI_AIO_MIN_PWA_SCORE "95";
-# This is the branch being built; e.g. `pull/12345` for PR builds.
-setPublicVar CI_BRANCH "$CIRCLE_BRANCH";
-setPublicVar CI_COMMIT "$CIRCLE_SHA1";
-# `CI_COMMIT_RANGE` will only be available when `CIRCLE_COMPARE_URL` is also available,
-# i.e. on push builds (a.k.a. non-PR builds). That is fine, since we only need it in push builds.
-setPublicVar CI_COMMIT_RANGE "$(sed -r 's|^.*/([0-9a-f]+\.\.\.[0-9a-f]+)$|\1|i' <<< ${CIRCLE_COMPARE_URL:-})";
-setPublicVar CI_PULL_REQUEST "${CIRCLE_PR_NUMBER:-false}";
-setPublicVar CI_REPO_NAME "$CIRCLE_PROJECT_REPONAME";
-setPublicVar CI_REPO_OWNER "$CIRCLE_PROJECT_USERNAME";
-
-
-####################################################################################################
-# Define SECRET environment variables for CircleCI.
-####################################################################################################
-setSecretVar CI_SECRET_AIO_DEPLOY_FIREBASE_TOKEN "$AIO_DEPLOY_TOKEN";
-setSecretVar CI_SECRET_PAYLOAD_FIREBASE_TOKEN "$ANGULAR_PAYLOAD_TOKEN";
-# Defined in https://angular-team.slack.com/apps/A0F7VRE7N-circleci.
-setSecretVar CI_SECRET_SLACK_CARETAKER_WEBHOOK_URL "$SLACK_CARETAKER_WEBHOOK_URL";
-
-
-# Source `$BASH_ENV` to make the variables available immediately.
-source $BASH_ENV;

.circleci/rbe-bazel.rc

@@ -1,77 +0,0 @@
-# These options are enabled when running on CI with Remote Build Execution.
-
-################################################################
-# Toolchain related flags for remote build execution.          #
-################################################################
-# Remote Build Execution requires a strong hash function, such as SHA256.
-startup --host_jvm_args=-Dbazel.DigestFunction=SHA256
-
-# Depending on how many machines are in the remote execution instance, setting
-# this higher can make builds faster by allowing more jobs to run in parallel.
-# Setting it too high can result in jobs that timeout, however, while waiting
-# for a remote machine to execute them.
-build --jobs=150
-
-# Set several flags related to specifying the platform, toolchain and java
-# properties.
-# These flags are duplicated rather than imported from (for example)
-# %workspace%/configs/ubuntu16_04_clang/1.0/toolchain.bazelrc to make this
-# bazelrc a standalone file that can be copied more easily.
-# These flags should only be used as is for the rbe-ubuntu16-04 container
-# and need to be adapted to work with other toolchain containers.
-build --host_javabase=@bazel_toolchains//configs/ubuntu16_04_clang/1.0:jdk8
-build --javabase=@bazel_toolchains//configs/ubuntu16_04_clang/1.0:jdk8
-build --host_java_toolchain=@bazel_tools//tools/jdk:toolchain_hostjdk8
-build --java_toolchain=@bazel_tools//tools/jdk:toolchain_hostjdk8
-build --crosstool_top=@bazel_toolchains//configs/ubuntu16_04_clang/1.0/bazel_0.15.0/default:toolchain
-build --action_env=BAZEL_DO_NOT_DETECT_CPP_TOOLCHAIN=1
-# Platform flags:
-# The toolchain container used for execution is defined in the target indicated
-# by "extra_execution_platforms", "host_platform" and "platforms".
-# If you are using your own toolchain container, you need to create a platform
-# target with "constraint_values" that allow for the toolchain specified with
-# "extra_toolchains" to be selected (given constraints defined in
-# "exec_compatible_with").
-# More about platforms: https://docs.bazel.build/versions/master/platforms.html
-build --extra_toolchains=@bazel_toolchains//configs/ubuntu16_04_clang/1.0/bazel_0.15.0/cpp:cc-toolchain-clang-x86_64-default
-build --extra_execution_platforms=//tools:rbe_ubuntu1604-angular
-build --host_platform=//tools:rbe_ubuntu1604-angular
-build --platforms=//tools:rbe_ubuntu1604-angular
-
-# Set various strategies so that all actions execute remotely. Mixing remote
-# and local execution will lead to errors unless the toolchain and remote
-# machine exactly match the host machine.
-build --spawn_strategy=remote
-build --strategy=Javac=remote
-build --strategy=Closure=remote
-build --genrule_strategy=remote
-build --define=EXECUTOR=remote
-
-# Enable the remote cache so action results can be shared across machines,
-# developers, and workspaces.
-build --remote_cache=remotebuildexecution.googleapis.com
-
-# Enable remote execution so actions are performed on the remote systems.
-build --remote_executor=remotebuildexecution.googleapis.com
-
-# Remote instance.
-build --remote_instance_name=projects/internal-200822/instances/default_instance
-
-# Enable encryption.
-build --tls_enabled=true
-
-# Enforce stricter environment rules, which eliminates some non-hermetic
-# behavior and therefore improves both the remote cache hit rate and the
-# correctness and repeatability of the build.
-build --experimental_strict_action_env=true
-
-# Set a higher timeout value, just in case.
-build --remote_timeout=3600
-
-# Enable authentication. This will pick up application default credentials by
-# default. You can use --auth_credentials=some_file.json to use a service
-# account credential instead.
-build --auth_enabled=true
-
-# Do not accept remote cache.
-build --remote_accept_cached=false

.github/ISSUE_TEMPLATE.md

@@ -1,10 +1,59 @@
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑
+<!--
+PLEASE HELP US PROCESS GITHUB ISSUES FASTER BY PROVIDING THE FOLLOWING INFORMATION.
 
-Please help us process issues more efficiently by filing an
-issue using one of the following templates:
+ISSUES MISSING IMPORTANT INFORMATION MAY BE CLOSED WITHOUT INVESTIGATION.
+-->
 
-https://github.com/angular/angular/issues/new/choose
+## I'm submitting a...
+<!-- Check one of the following options with "x" -->
+<pre><code>
+[ ] Regression (a behavior that used to work and stopped working in a new release)
+[ ] Bug report  <!-- Please search GitHub for a similar issue or PR before submitting -->
+[ ] Performance issue
+[ ] Feature request
+[ ] Documentation issue or request
+[ ] Support request => Please do not submit support request here, instead see https://github.com/angular/angular/blob/master/CONTRIBUTING.md#question
+[ ] Other... Please describe:
+</code></pre>
 
-Thank you!
+## Current behavior
+<!-- Describe how the issue manifests. -->
 
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑
+
+## Expected behavior
+<!-- Describe what the desired behavior would be. -->
+
+
+## Minimal reproduction of the problem with instructions
+<!--
+For bug reports please provide the *STEPS TO REPRODUCE* and if possible a *MINIMAL DEMO* of the problem via
+https://stackblitz.com or similar (you can use this template as a starting point: https://stackblitz.com/fork/angular-gitter).
+-->
+
+## What is the motivation / use case for changing the behavior?
+<!-- Describe the motivation or the concrete use case. -->
+
+
+## Environment
+
+<pre><code>
+Angular version: X.Y.Z
+<!-- Check whether this is still an issue in the most recent Angular version -->
+
+Browser:
+- [ ] Chrome (desktop) version XX
+- [ ] Chrome (Android) version XX
+- [ ] Chrome (iOS) version XX
+- [ ] Firefox version XX
+- [ ] Safari (desktop) version XX
+- [ ] Safari (iOS) version XX
+- [ ] IE version XX
+- [ ] Edge version XX
+ 
+For Tooling issues:
+- Node version: XX  <!-- run `node --version` -->
+- Platform:  <!-- Mac, Linux, Windows -->
+
+Others:
+<!-- Anything else relevant?  Operating system version, IDE, package manager, HTTP server, ... -->
+</code></pre>

.github/ISSUE_TEMPLATE/1-bug-report.md

@@ -1,63 +0,0 @@
----
-name: "\U0001F41EBug report"
-about: Report a bug in the Angular Framework
----
-<!--🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅
-
-Oh hi there! 😄 
-
-To expedite issue processing please search open and closed issues before submitting a new one.
-Existing issues often contain information about workarounds, resolution, or progress updates.
-
-🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅-->
-
-
-# 🐞 bug report
-
-### Affected Package
-<!-- Can you pin-point one or more @angular/* packages as the source of the bug? -->
-<!-- ✍️edit: --> The issue is caused by package @angular/....
-
-
-### Is this a regression?
-
-<!-- Did this behavior use to work in the previous version? -->
-<!-- ✍️--> Yes, the previous version in which this bug was not present was: ....
-
-
-### Description
-
-<!-- ✍️--> A clear and concise description of the problem...
-
-
-## 🔬 Minimal Reproduction
-<!--
-Please create and share minimal reproduction of the issue starting with this template: https://stackblitz.com/fork/angular-issue-repro2
--->
-<!-- ✍️--> https://stackblitz.com/...
-
-<!--
-If StackBlitz is not suitable for reproduction of your issue, please create a minimal GitHub repository with the reproduction of the issue. Share the link to the repo below along with step-by-step instructions to reproduce the problem, as well as expected and actual behavior.
--->
-
-## 🔥 Exception or Error
-<pre><code>
-<!-- If the issue is accompanied by an exception or an error, please share it below: -->
-<!-- ✍️-->
-
-</code></pre>
-
-
-## 🌍  Your Environment
-
-**Angular Version:**
-<pre><code>
-<!-- run `ng version` and paste output below -->
-<!-- ✍️-->
-
-</code></pre>
-
-**Anything else relevant?**
-<!-- ✍️Is this a browser specific issue? If so, please specify the browser and version. -->
-
-<!-- ✍️Do any of these matter: operating system, IDE, package manager, HTTP server, ...? If so, please mention it below. -->

.github/ISSUE_TEMPLATE/2-feature-request.md

@@ -1,32 +0,0 @@
----
-name: "\U0001F680Feature request"
-about: Suggest a feature for Angular Framework
-
----
-<!--🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅
-
-Oh hi there! 😄 
-
-To expedite issue processing please search open and closed issues before submitting a new one.
-Existing issues often contain information about workarounds, resolution, or progress updates.
-
-🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅-->
-
-
-# 🚀 feature request
-
-### Relevant Package
-<!-- Can you pin-point one or more @angular/* packages the are relevant for this feature request? -->
-<!-- ✍️edit: --> This feature request is for @angular/....
-
-
-### Description
-<!-- ✍️--> A clear and concise description of the problem or missing capability...
-
-
-### Describe the solution you'd like
-<!-- ✍️--> If you have a solution in mind, please describe it.
-
-
-### Describe alternatives you've considered
-<!-- ✍️--> Have you considered any alternative solutions or workarounds?

.github/ISSUE_TEMPLATE/3-docs-bug.md

@@ -1,55 +0,0 @@
----
-name: "📚 Docs or angular.io issue report"
-about: Report an issue in Angular's documentation or angular.io application
-
----
-<!--🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅
-
-Oh hi there! 😄
-
-To expedite issue processing please search open and closed issues before submitting a new one.
-Existing issues often contain information about workarounds, resolution, or progress updates.
-
-🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅-->
-
-# 📚 Docs or angular.io bug report
-
-### Description
-
-<!-- ✍️edit:--> A clear and concise description of the problem...
-
-
-## 🔬 Minimal Reproduction
-
-### What's the affected URL?**
-<!-- ✍️edit:--> https://angular.io/...
-
-### Reproduction Steps**
-<!-- If applicable please list the steps to take to reproduce the issue -->
-<!-- ✍️edit:-->
-
-### Expected vs Actual Behavior**
-<!-- If applicable please describe the difference between the expected and actual behavior after following the repro steps. -->
-<!-- ✍️edit:-->
-
-
-## 📷Screenshot
-<!-- Often a screenshot can help to capture the issue better than a long description. -->
-<!-- ✍️upload a screenshot:-->
-
-
-## 🔥 Exception or Error
-<pre><code>
-<!-- If the issue is accompanied by an exception or an error, please share it below: -->
-<!-- ✍️-->
-
-</code></pre>
-
-
-## 🌍  Your Environment
-
-### Browser info
-<!-- ✍️Is this a browser specific issue? If so, please specify the device, browser, and version. -->
-
-### Anything else relevant?
-<!-- ✍️Please provide additional info if necessary. -->

.github/ISSUE_TEMPLATE/4-security-issue-disclosure.md

@@ -1,11 +0,0 @@
----
-name: ⚠️ Security issue disclosure
-about: Report a security issue in Angular Framework, Material, or CLI
-
----
-
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑
-
-Please read https://angular.io/guide/security#report-issues on how to disclose security related issues.
-
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑

.github/ISSUE_TEMPLATE/5-support-request.md

@@ -1,16 +0,0 @@
----
-name: "❓Support request"
-about: Questions and requests for support
-
----
-
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑
-
-Please do not file questions or support requests on the GitHub issues tracker.
-
-You can get your questions answered using other communication channels. Please see: 
-https://github.com/angular/angular/blob/master/CONTRIBUTING.md#question
-
-Thank you!
-
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑

.github/ISSUE_TEMPLATE/6-angular-cli.md

@@ -1,13 +0,0 @@
----
-name: "\U0001F6E0️Angular CLI"
-about: Issues and feature requests for Angular CLI
-
----
-
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑
-
-Please file any Angular CLI issues at: https://github.com/angular/angular-cli/issues/new
-
-For the time being, we keep Angular CLI issues in a separate repository.
-
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑

.github/ISSUE_TEMPLATE/7-angular-material.md

@@ -1,13 +0,0 @@
----
-name: "\U0001F48EAngular Material"
-about: Issues and feature requests for Angular Material
-
----
-
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑
-
-Please file any Angular Material issues at: https://github.com/angular/material2/issues/new
-
-For the time being, we keep Angular Material issues in a separate repository.
-
-🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑🛑

.github/PULL_REQUEST_TEMPLATE.md

@@ -10,17 +10,17 @@ Please check if your PR fulfills the following requirements:
 What kind of change does this PR introduce?
 
 <!-- Please check the one that applies to this PR using "x". -->
-
-- [ ] Bugfix
-- [ ] Feature
-- [ ] Code style update (formatting, local variables)
-- [ ] Refactoring (no functional changes, no api changes)
-- [ ] Build related changes
-- [ ] CI related changes
-- [ ] Documentation content changes
-- [ ] angular.io application / infrastructure changes
-- [ ] Other... Please describe:
-
+```
+[ ] Bugfix
+[ ] Feature
+[ ] Code style update (formatting, local variables)
+[ ] Refactoring (no functional changes, no api changes)
+[ ] Build related changes
+[ ] CI related changes
+[ ] Documentation content changes
+[ ] angular.io application / infrastructure changes
+[ ] Other... Please describe:
+```
 
 ## What is the current behavior?
 <!-- Please describe the current behavior that you are modifying, or link to a relevant issue. -->
@@ -32,10 +32,10 @@ Issue Number: N/A
 
 
 ## Does this PR introduce a breaking change?
-
-- [ ] Yes
-- [ ] No
-
+```
+[ ] Yes
+[ ] No
+```
 
 <!-- If this PR contains a breaking change, please describe the impact and migration path for existing applications below. -->
 

.github/angular-robot.yml

@@ -4,7 +4,7 @@
 size:
   disabled: false
   maxSizeIncrease: 2000
-  circleCiStatusName: "ci/circleci: test_ivy_aot"
+  circleCiStatusName: "ci/circleci: test"
 
 # options for the merge plugin
 merge:
@@ -39,7 +39,6 @@ merge:
       - "packages/**"
     # list of patterns to ignore for the files changed by the PR
     exclude:
-      - "packages/bazel/*.bzl"
       - "packages/language-service/**"
       - "**/.gitignore"
       - "**/.gitkeep"
@@ -50,7 +49,6 @@ merge:
       - "**/BUILD.bazel"
       - "packages/**/integrationtest/**"
       - "packages/**/test/**"
-      - "packages/compiler-cli/src/ngcc/**"
 
   # comment that will be added to a PR when there is a conflict, leave empty or set to false to disable
   mergeConflictComment: "Hi @{{PRAuthor}}! This PR has merge conflicts due to recent upstream merges.
@@ -126,23 +124,3 @@ triage:
     -
       - "type: RFC / Discussion / question"
       - "comp: *"
-
-# options for the triage PR plugin
-triagePR:
-  # set to true to disable
-  disabled: false
-  # number of the milestone to apply when the PR has not been triaged yet
-  needsTriageMilestone: 83,
-  # number of the milestone to apply when the PR is triaged
-  defaultMilestone: 82,
-  # arrays of labels that determine if a PR has been triaged by the caretaker
-  l1TriageLabels:
-    -
-      - "comp: *"
-  # arrays of labels that determine if a PR has been fully triaged
-  l2TriageLabels:
-    -
-      - "type: *"
-      - "effort*"
-      - "risk*"
-      - "comp: *"

.gitignore

@@ -1,7 +1,7 @@
 .DS_STORE
 
 /dist/
-/bazel-*
+bazel-*
 e2e_test.*
 node_modules
 bower_components
@@ -14,6 +14,7 @@ pubspec.lock
 .settings/
 *.swo
 modules/.settings
+.bazelrc
 .vscode
 modules/.vscode
 

.pullapprove.yml

@@ -87,10 +87,10 @@ groups:
       files:
         include:
           - "WORKSPACE"
-          - ".bazel*"
           - "*.bazel"
           - "*.bzl"
           - "packages/bazel/*"
+          - "tools/bazel.rc"
           - "/docs/BAZEL.md"
     users:
       - alexeagle #primary
@@ -108,9 +108,9 @@ groups:
           - "*.lock"
           - "tools/*"
         exclude:
-          - "aio/*"
-          - "packages/core/test/bundling/*"
+          - "tools/bazel.rc"
           - "tools/public_api_guard/*"
+          - "aio/*"
     users:
       - IgorMinar #primary
       - alexeagle
@@ -277,9 +277,6 @@ groups:
         - "aio/content/guide/forms.md"
         - "aio/content/examples/forms/*"
         - "aio/content/images/guide/forms/*"
-        - "aio/content/guide/forms-overview.md"
-        - "aio/content/examples/forms-overview/*"
-        - "aio/content/images/guide/forms-overview/*"
         - "aio/content/guide/form-validation.md"
         - "aio/content/examples/form-validation/*"
         - "aio/content/images/guide/form-validation/*"

.travis.yml

@@ -30,6 +30,14 @@ env:
     # GITHUB_TOKEN_ANGULAR=<github token, a personal access token of the angular-builds account, account access in valentine>
     # This is needed for the e2e Travis matrix task to publish packages to github for continuous packages delivery.
     - secure: "aCdHveZuY8AT4Jr1JoJB4LxZsnGWRe/KseZh1YXYe5UtufFCtTVHvUcLn0j2aLBF0KpdyS+hWf0i4np9jthKu2xPKriefoPgCMpisYeC0MFkwbmv+XlgkUbgkgVZMGiVyX7DCYXVahxIoOUjVMEDCbNiHTIrfEuyq24U3ok2tHc="
+    # FIREBASE_TOKEN
+    # This is needed for publishing builds to the "aio-staging" and "angular-io" firebase projects.
+    # This token was generated using the aio-deploy@angular.io account using `firebase login:ci` and password from valentine
+    - secure: "L5CyQmpwWtoR4Qi4xlWQh/cL1M6ZeJL4W4QAr4HdKFMgYt9h+Whqkymyh2NxwmCbPvWa7yUd+OiLQUDCY7L2VIg16hTwoe2CgYDyQA0BEwLzxtRrJXl93TfwMlrUx5JSIzAccD6D4sjtz8kSFMomK2Nls33xOXOukwyhVMjd0Cg="
+    # ANGULAR_PAYLOAD_FIREBASE_TOKEN
+    # This is for payload size data to "angular-payload-size" firebase project
+    # This token was generated using the payload@angular.io account using `firebase login:ci` and password from valentine
+    - secure: "SxotP/ymNy6uWAVbfwM9BlwETPEBpkRvU/F7fCtQDDic99WfQHzzUSQqHTk8eKk3GrGAOSL09vT0WfStQYEIGEoS5UHWNgOnelxhw+d5EnaoB8vQ0dKQBTK092hQg4feFprr+B/tCasyMV6mVwpUzZMbIJNn/Rx7H5g1bp+Gkfg="
   matrix:
     # Order: a slower build first, so that we don't occupy an idle travis worker waiting for others to complete.
     - CI_MODE=e2e
@@ -39,10 +47,16 @@ env:
     # - CI_MODE=browserstack_required
     - CI_MODE=saucelabs_optional
     - CI_MODE=browserstack_optional
+    - CI_MODE=aio_tools_test
+    - CI_MODE=aio
+    - CI_MODE=aio_local
+    - CI_MODE=aio_e2e AIO_SHARD=0
+    - CI_MODE=aio_e2e AIO_SHARD=1
 
 matrix:
   fast_finish: true
   allow_failures:
+    - env: "CI_MODE=aio_local"
     - env: "CI_MODE=saucelabs_optional"
     - env: "CI_MODE=browserstack_optional"
 
@@ -56,6 +70,8 @@ install:
 script:
   - ./scripts/ci/build.sh
   - ./scripts/ci/test.sh
+  # deploy is part of 'script' and not 'after_success' so that we fail the build if the deployment fails
+  - ./scripts/ci/deploy.sh
   - ./scripts/ci/angular.sh
   # all the scripts under this line will not quickly abort in case ${TRAVIS_TEST_RESULT} is 1 (job failure)
   - ./scripts/ci/cleanup.sh

BUILD.bazel

@@ -8,14 +8,26 @@ exports_files([
     "protractor-perf.conf.js",
 ])
 
+# Developers should always run `bazel run :install`
+# This ensures that package.json in subdirectories get installed as well.
+alias(
+    name = "install",
+    actual = "@nodejs//:yarn",
+)
+
+alias(
+    name = "node_modules",
+    actual = "@angular_deps//:node_modules",
+)
+
 filegroup(
     name = "web_test_bootstrap_scripts",
     # do not sort
     srcs = [
-        "@ngdeps//node_modules/reflect-metadata:Reflect.js",
-        "@ngdeps//node_modules/zone.js:dist/zone.js",
-        "@ngdeps//node_modules/zone.js:dist/zone-testing.js",
-        "@ngdeps//node_modules/zone.js:dist/task-tracking.js",
+        "@angular_deps//:node_modules/reflect-metadata/Reflect.js",
+        "@angular_deps//:node_modules/zone.js/dist/zone.js",
+        "@angular_deps//:node_modules/zone.js/dist/zone-testing.js",
+        "@angular_deps//:node_modules/zone.js/dist/task-tracking.js",
         "//:test-events.js",
     ],
 )
@@ -23,29 +35,11 @@ filegroup(
 filegroup(
     name = "angularjs_scripts",
     srcs = [
-        "@ngdeps//node_modules/angular:angular.js",
-        "@ngdeps//node_modules/angular-1.5:angular.js",
-        "@ngdeps//node_modules/angular-1.6:angular.js",
-        "@ngdeps//node_modules/angular-mocks:angular-mocks.js",
-        "@ngdeps//node_modules/angular-mocks-1.5:angular-mocks.js",
-        "@ngdeps//node_modules/angular-mocks-1.6:angular-mocks.js",
+        "@angular_deps//:node_modules/angular-1.5/angular.js",
+        "@angular_deps//:node_modules/angular-1.6/angular.js",
+        "@angular_deps//:node_modules/angular-mocks-1.5/angular-mocks.js",
+        "@angular_deps//:node_modules/angular-mocks-1.6/angular-mocks.js",
+        "@angular_deps//:node_modules/angular-mocks/angular-mocks.js",
+        "@angular_deps//:node_modules/angular/angular.js",
     ],
 )
-
-load("@build_bazel_rules_nodejs//:defs.bzl", "nodejs_binary")
-
-# A nodejs_binary for @angular/bazel/ngc-wrapped to use by default in
-# ng_module that depends on @npm//@angular/bazel instead of the
-# output of the //packages/bazel/src/ngc-wrapped ts_library rule. This
-# default is for downstream users that depend on the @angular/bazel npm
-# package. The generated @npm//@angular/bazel/ngc-wrapped target
-# does not work because it does not have the node `--expose-gc` flag
-# set which is required to support the call to `global.gc()`.
-nodejs_binary(
-    name = "@angular/bazel/ngc-wrapped",
-    configuration_env_vars = ["compile"],
-    data = ["@npm//@angular/bazel"],
-    entry_point = "@angular/bazel/src/ngc-wrapped/index.js",
-    install_source_map_support = False,
-    templated_args = ["--node_options=--expose-gc"],
-)

CHANGELOG.md

@@ -1,252 +1,3 @@
-<a name="7.2.0-beta.0"></a>
-# [7.2.0-beta.0](https://github.com/angular/angular/compare/7.1.0...7.2.0-beta.0) (2018-11-28)
-
-
-### Bug Fixes
-
-* **common:** expose request url in network error ([#27143](https://github.com/angular/angular/issues/27143)) ([1db53da](https://github.com/angular/angular/commit/1db53da)), closes [#27029](https://github.com/angular/angular/issues/27029)
-* **upgrade:** don't rely upon the runtime to resolve forward refs ([#27132](https://github.com/angular/angular/issues/27132)) ([a4462c2](https://github.com/angular/angular/commit/a4462c2))
-
-
-
-<a name="7.1.1"></a>
-## [7.1.1](https://github.com/angular/angular/compare/7.1.0...7.1.1) (2018-11-28)
-
-
-### Bug Fixes
-
-* **core:** export a value for InjectFlags ([#27279](https://github.com/angular/angular/issues/27279)) ([bdf5f3e](https://github.com/angular/angular/commit/bdf5f3e)), closes [#27251](https://github.com/angular/angular/issues/27251)
-
-
-
-<a name="7.1.0"></a>
-# [7.1.0](https://github.com/angular/angular/compare/7.1.0-rc.0...7.1.0) (2018-11-21)
-
-
-### Bug Fixes
-
-* **core:** allow null value for renderer setElement(…) ([#17065](https://github.com/angular/angular/issues/17065)) ([ff15043](https://github.com/angular/angular/commit/ff15043)), closes [#13686](https://github.com/angular/angular/issues/13686)
-* **router:** fix regression where navigateByUrl promise didn't resolve on CanLoad failure ([#26455](https://github.com/angular/angular/issues/26455)) ([1c9b065](https://github.com/angular/angular/commit/1c9b065)), closes [#26284](https://github.com/angular/angular/issues/26284)
-* **service-worker:** clean up caches from old SW versions ([#26319](https://github.com/angular/angular/issues/26319)) ([2326b9c](https://github.com/angular/angular/commit/2326b9c))
-* **upgrade:** properly destroy upgraded component elements and descendants ([#26209](https://github.com/angular/angular/issues/26209)) ([071934e](https://github.com/angular/angular/commit/071934e)), closes [#26208](https://github.com/angular/angular/issues/26208)
-* **compiler:** generate inputs with aliases properly ([#26774](https://github.com/angular/angular/issues/26774)) ([19fcfc3](https://github.com/angular/angular/commit/19fcfc3))
-* **compiler:** generate relative paths only in summary file errors ([#26759](https://github.com/angular/angular/issues/26759)) ([56f44be](https://github.com/angular/angular/commit/56f44be))
-* **core:** ignore comment nodes under unsafe elements ([#25879](https://github.com/angular/angular/issues/25879)) ([d5cbcef](https://github.com/angular/angular/commit/d5cbcef))
-* **core:** Remove static dependency from [@angular](https://github.com/angular)/core to [@angular](https://github.com/angular)/compiler ([#26734](https://github.com/angular/angular/issues/26734)) ([d042c4a](https://github.com/angular/angular/commit/d042c4a))
-* **core:** support computed base class in metadata inheritance ([#24014](https://github.com/angular/angular/issues/24014)) ([95743e3](https://github.com/angular/angular/commit/95743e3))
-* **bazel:** unknown replay compiler error in windows ([#26711](https://github.com/angular/angular/issues/26711)) ([aed95fd](https://github.com/angular/angular/commit/aed95fd))
-* **core:** ensure that `ɵdefineNgModule` is available in flat-file formats ([#26403](https://github.com/angular/angular/issues/26403)) ([a64859b](https://github.com/angular/angular/commit/a64859b))
-* **router:** remove type bludgeoning of context and outlet when running CanDeactivate ([#26496](https://github.com/angular/angular/issues/26496)) ([496372d](https://github.com/angular/angular/commit/496372d)), closes [#18253](https://github.com/angular/angular/issues/18253)
-* **service-worker:** add typing to public api guard and fix lint errors ([#25860](https://github.com/angular/angular/issues/25860)) ([1061875](https://github.com/angular/angular/commit/1061875))
-* **upgrade:** improve downgrading-related error messages ([#26217](https://github.com/angular/angular/issues/26217)) ([7dbc103](https://github.com/angular/angular/commit/7dbc103))
-* **upgrade:** make typings compatible with older AngularJS typings ([#26880](https://github.com/angular/angular/issues/26880)) ([64647af](https://github.com/angular/angular/commit/64647af)), closes [#26420](https://github.com/angular/angular/issues/26420)
-* **compiler-cli:** add missing tslib dependency ([#27063](https://github.com/angular/angular/issues/27063)) ([c31e78f](https://github.com/angular/angular/commit/c31e78f))
-* **compiler-cli:** only pass canonical genfile paths to compiler host ([#27062](https://github.com/angular/angular/issues/27062)) ([0ada23a](https://github.com/angular/angular/commit/0ada23a))
-* **router:** add `relativeLinkResolution` to `recognize` operator ([#26990](https://github.com/angular/angular/issues/26990)) ([a752971](https://github.com/angular/angular/commit/a752971)), closes [#26983](https://github.com/angular/angular/issues/26983)
-
-
-### Features
-
-* **bazel:** Bazel workspace schematics ([#26971](https://github.com/angular/angular/issues/26971)) ([b07bd30](https://github.com/angular/angular/commit/b07bd30))
-* **router:** add prioritizedGuardValue operator optimization and allowing UrlTree return from guard ([#26478](https://github.com/angular/angular/issues/26478)) ([fdfedce](https://github.com/angular/angular/commit/fdfedce))
-* **compiler:** ability to mark an InvokeFunctionExpr as pure ([#26860](https://github.com/angular/angular/issues/26860)) ([4dfa71f](https://github.com/angular/angular/commit/4dfa71f))
-* **forms:** add updateOn option to FormBuilder ([#24599](https://github.com/angular/angular/issues/24599)) ([e9e804f](https://github.com/angular/angular/commit/e9e804f))
-* **router:** allow guards to return UrlTree as well as boolean ([#26521](https://github.com/angular/angular/issues/26521)) ([081f95c](https://github.com/angular/angular/commit/081f95c))
-* **router:** allow redirect from guards by returning UrlTree ([#26521](https://github.com/angular/angular/issues/26521)) ([152ca66](https://github.com/angular/angular/commit/152ca66))
-* **router:** guard returning UrlTree cancels current navigation and redirects ([#26521](https://github.com/angular/angular/issues/26521)) ([4e9f2e5](https://github.com/angular/angular/commit/4e9f2e5)), closes [#24618](https://github.com/angular/angular/issues/24618)
-* **service-worker:** add typing for messagesClicked in SwPush service ([#25860](https://github.com/angular/angular/issues/25860)) ([c78c221](https://github.com/angular/angular/commit/c78c221))
-* **service-worker:** close notifications and focus window on click ([#25860](https://github.com/angular/angular/issues/25860)) ([f5d5a3d](https://github.com/angular/angular/commit/f5d5a3d))
-* **service-worker:** handle 'notificationclick' events ([#25860](https://github.com/angular/angular/issues/25860)) ([cf6ea28](https://github.com/angular/angular/commit/cf6ea28)), closes [#20956](https://github.com/angular/angular/issues/20956) [#22311](https://github.com/angular/angular/issues/22311)
-* **upgrade:** support downgrading multiple modules ([#26217](https://github.com/angular/angular/issues/26217)) ([93837e9](https://github.com/angular/angular/commit/93837e9)), closes [#26062](https://github.com/angular/angular/issues/26062)
-* **router:** add pathParamsChange mode for runGuardsAndResolvers ([#26861](https://github.com/angular/angular/issues/26861)) ([bf6ac6c](https://github.com/angular/angular/commit/bf6ac6c)), closes [#18253](https://github.com/angular/angular/issues/18253)
-
-
-<a name="7.1.0-rc.0"></a>
-# [7.1.0-rc.0](https://github.com/angular/angular/compare/7.1.0-beta.2...7.1.0-rc.0) (2018-11-14)
-
-
-### Bug Fixes
-
-* **compiler-cli:** add missing tslib dependency ([#27063](https://github.com/angular/angular/issues/27063)) ([c31e78f](https://github.com/angular/angular/commit/c31e78f))
-* **compiler-cli:** only pass canonical genfile paths to compiler host ([#27062](https://github.com/angular/angular/issues/27062)) ([0ada23a](https://github.com/angular/angular/commit/0ada23a))
-* **router:** add `relativeLinkResolution` to `recognize` operator ([#26990](https://github.com/angular/angular/issues/26990)) ([a752971](https://github.com/angular/angular/commit/a752971)), closes [#26983](https://github.com/angular/angular/issues/26983)
-
-
-### Features
-
-* **router:** add pathParamsChange mode for runGuardsAndResolvers ([#26861](https://github.com/angular/angular/issues/26861)) ([bf6ac6c](https://github.com/angular/angular/commit/bf6ac6c)), closes [#18253](https://github.com/angular/angular/issues/18253)
-
-
-
-<a name="7.0.4"></a>
-## [7.0.4](https://github.com/angular/angular/compare/7.0.3...7.0.4) (2018-11-14)
-
-
-### Bug Fixes
-
-* **compiler-cli:** add missing tslib dependency ([#27063](https://github.com/angular/angular/issues/27063)) ([4348c47](https://github.com/angular/angular/commit/4348c47))
-* **compiler-cli:** only pass canonical genfile paths to compiler host ([#27062](https://github.com/angular/angular/issues/27062)) ([188e9ce](https://github.com/angular/angular/commit/188e9ce))
-* **router:** add `relativeLinkResolution` to `recognize` operator ([#26990](https://github.com/angular/angular/issues/26990)) ([d304427](https://github.com/angular/angular/commit/d304427)), closes [#26983](https://github.com/angular/angular/issues/26983)
-
-
-
-<a name="7.1.0-beta.2"></a>
-# [7.1.0-beta.2](https://github.com/angular/angular/compare/7.1.0-beta.1...7.1.0-beta.2) (2018-11-07)
-
-
-### Bug Fixes
-
-* **bazel:** unknown replay compiler error in windows ([#26711](https://github.com/angular/angular/issues/26711)) ([aed95fd](https://github.com/angular/angular/commit/aed95fd))
-* **core:** ensure that `ɵdefineNgModule` is available in flat-file formats ([#26403](https://github.com/angular/angular/issues/26403)) ([a64859b](https://github.com/angular/angular/commit/a64859b))
-* **router:** remove type bludgeoning of context and outlet when running CanDeactivate ([#26496](https://github.com/angular/angular/issues/26496)) ([496372d](https://github.com/angular/angular/commit/496372d)), closes [#18253](https://github.com/angular/angular/issues/18253)
-* **service-worker:** add typing to public api guard and fix lint errors ([#25860](https://github.com/angular/angular/issues/25860)) ([1061875](https://github.com/angular/angular/commit/1061875))
-* **upgrade:** improve downgrading-related error messages ([#26217](https://github.com/angular/angular/issues/26217)) ([7dbc103](https://github.com/angular/angular/commit/7dbc103))
-* **upgrade:** make typings compatible with older AngularJS typings ([#26880](https://github.com/angular/angular/issues/26880)) ([64647af](https://github.com/angular/angular/commit/64647af)), closes [#26420](https://github.com/angular/angular/issues/26420)
-
-
-### Features
-
-* **compiler:** ability to mark an InvokeFunctionExpr as pure ([#26860](https://github.com/angular/angular/issues/26860)) ([4dfa71f](https://github.com/angular/angular/commit/4dfa71f))
-* **forms:** add updateOn option to FormBuilder ([#24599](https://github.com/angular/angular/issues/24599)) ([e9e804f](https://github.com/angular/angular/commit/e9e804f))
-* **router:** allow guards to return UrlTree as well as boolean ([#26521](https://github.com/angular/angular/issues/26521)) ([081f95c](https://github.com/angular/angular/commit/081f95c))
-* **router:** allow redirect from guards by returning UrlTree ([#26521](https://github.com/angular/angular/issues/26521)) ([152ca66](https://github.com/angular/angular/commit/152ca66))
-* **router:** guard returning UrlTree cancels current navigation and redirects ([#26521](https://github.com/angular/angular/issues/26521)) ([4e9f2e5](https://github.com/angular/angular/commit/4e9f2e5)), closes [#24618](https://github.com/angular/angular/issues/24618)
-* **service-worker:** add typing for messagesClicked in SwPush service ([#25860](https://github.com/angular/angular/issues/25860)) ([c78c221](https://github.com/angular/angular/commit/c78c221))
-* **service-worker:** close notifications and focus window on click ([#25860](https://github.com/angular/angular/issues/25860)) ([f5d5a3d](https://github.com/angular/angular/commit/f5d5a3d))
-* **service-worker:** handle 'notificationclick' events ([#25860](https://github.com/angular/angular/issues/25860)) ([cf6ea28](https://github.com/angular/angular/commit/cf6ea28)), closes [#20956](https://github.com/angular/angular/issues/20956) [#22311](https://github.com/angular/angular/issues/22311)
-* **upgrade:** support downgrading multiple modules ([#26217](https://github.com/angular/angular/issues/26217)) ([93837e9](https://github.com/angular/angular/commit/93837e9)), closes [#26062](https://github.com/angular/angular/issues/26062)
-
-
-
-<a name="7.0.3"></a>
-## [7.0.3](https://github.com/angular/angular/compare/7.0.2...7.0.3) (2018-11-07)
-
-
-### Bug Fixes
-
-* **bazel:** unknown replay compiler error in windows ([#26711](https://github.com/angular/angular/issues/26711)) ([4d532df](https://github.com/angular/angular/commit/4d532df))
-* **router:** remove type bludgeoning of context and outlet when running CanDeactivate ([#26496](https://github.com/angular/angular/issues/26496)) ([dc05385](https://github.com/angular/angular/commit/dc05385)), closes [#18253](https://github.com/angular/angular/issues/18253)
-* **upgrade:** make typings compatible with older AngularJS typings ([#26880](https://github.com/angular/angular/issues/26880)) ([315d95c](https://github.com/angular/angular/commit/315d95c)), closes [#26420](https://github.com/angular/angular/issues/26420)
-
-
-
-<a name="7.1.0-beta.1"></a>
-# [7.1.0-beta.1](https://github.com/angular/angular/compare/7.1.0-beta.0...7.1.0-beta.1) (2018-10-31)
-
-
-### Bug Fixes
-
-* **compiler:** generate inputs with aliases properly ([#26774](https://github.com/angular/angular/issues/26774)) ([19fcfc3](https://github.com/angular/angular/commit/19fcfc3))
-* **compiler:** generate relative paths only in summary file errors ([#26759](https://github.com/angular/angular/issues/26759)) ([56f44be](https://github.com/angular/angular/commit/56f44be))
-* **core:** ignore comment nodes under unsafe elements ([#25879](https://github.com/angular/angular/issues/25879)) ([d5cbcef](https://github.com/angular/angular/commit/d5cbcef))
-* **core:** Remove static dependency from [@angular](https://github.com/angular)/core to [@angular](https://github.com/angular)/compiler ([#26734](https://github.com/angular/angular/issues/26734)) ([d042c4a](https://github.com/angular/angular/commit/d042c4a))
-* **core:** support computed base class in metadata inheritance ([#24014](https://github.com/angular/angular/issues/24014)) ([95743e3](https://github.com/angular/angular/commit/95743e3))
-
-
-
-<a name="7.0.2"></a>
-## [7.0.2](https://github.com/angular/angular/compare/7.0.1...7.0.2) (2018-10-31)
-
-
-### Bug Fixes
-
-* **compiler:** generate relative paths only in summary file errors ([#26759](https://github.com/angular/angular/issues/26759)) ([c01f340](https://github.com/angular/angular/commit/c01f340))
-* **core:** Remove static dependency from [@angular](https://github.com/angular)/core to [@angular](https://github.com/angular)/compiler ([#26734](https://github.com/angular/angular/issues/26734)) ([#26879](https://github.com/angular/angular/issues/26879)) ([257ac83](https://github.com/angular/angular/commit/257ac83))
-* **core:** support computed base class in metadata inheritance ([#24014](https://github.com/angular/angular/issues/24014)) ([b3c6409](https://github.com/angular/angular/commit/b3c6409))
-
-
-
-<a name="7.1.0-beta.0"></a>
-# [7.1.0-beta.0](https://github.com/angular/angular/compare/7.0.0-rc.1...7.1.0-beta.0) (2018-10-24)
-
-
-### Bug Fixes
-* **core:** allow null value for renderer setElement(…) ([#17065](https://github.com/angular/angular/issues/17065)) ([ff15043](https://github.com/angular/angular/commit/ff15043)), closes [#13686](https://github.com/angular/angular/issues/13686)
-* **router:** fix regression where navigateByUrl promise didn't resolve on CanLoad failure ([#26455](https://github.com/angular/angular/issues/26455)) ([1c9b065](https://github.com/angular/angular/commit/1c9b065)), closes [#26284](https://github.com/angular/angular/issues/26284)
-* **service-worker:** clean up caches from old SW versions ([#26319](https://github.com/angular/angular/issues/26319)) ([2326b9c](https://github.com/angular/angular/commit/2326b9c))
-* **upgrade:** properly destroy upgraded component elements and descendants ([#26209](https://github.com/angular/angular/issues/26209)) ([071934e](https://github.com/angular/angular/commit/071934e)), closes [#26208](https://github.com/angular/angular/issues/26208)
-
-
-### Features
-
-* **router:** add prioritizedGuardValue operator optimization and allowing UrlTree return from guard ([#26478](https://github.com/angular/angular/issues/26478)) ([fdfedce](https://github.com/angular/angular/commit/fdfedce))
-
-
-
-<a name="7.0.1"></a>
-## [7.0.1](https://github.com/angular/angular/compare/7.0.0...7.0.1) (2018-10-24)
-
-
-
-
-<a name="7.0.0"></a>
-# [7.0.0](https://github.com/angular/angular/compare/7.0.0-rc.1...7.0.0) (2018-10-18)
-
-
-### Release Highlights & Update instructions
-
-To learn about the release highlights and our new CLI-powered update workflow for your projects please check out the [v7 release announcement](https://blog.angular.io/version-7-of-angular-cli-prompts-virtual-scroll-drag-and-drop-and-more-c594e22e7b8c).
-
-
-### Dependency updates
-
-* @angular/core now depends on
-  * TypeScript 3.1
-  * RxJS 6.3
-* @angular/platform-server now depends on Domino 2.1
-
-
-### Features
-
-* **core:** add DoBootstrap interface. ([#24558](https://github.com/angular/angular/issues/24558)) ([732026c](https://github.com/angular/angular/commit/732026c)), closes [#24557](https://github.com/angular/angular/issues/24557)
-* **compiler:** add "original" placeholder value on extracted XMB ([#25079](https://github.com/angular/angular/issues/25079)) ([e99d860](https://github.com/angular/angular/commit/e99d860))
-* **compiler-cli:** add support to extend `angularCompilerOptions` ([#22717](https://github.com/angular/angular/issues/22717)) ([d7e5bbf](https://github.com/angular/angular/commit/d7e5bbf)), closes [#22684](https://github.com/angular/angular/issues/22684)
-* **bazel:** add additional parameters to `ts_api_guardian_test` def ([#25694](https://github.com/angular/angular/issues/25694)) ([2a21ca0](https://github.com/angular/angular/commit/2a21ca0))
-* **elements:** enable Shadow DOM v1 and slots ([#24861](https://github.com/angular/angular/issues/24861)) ([c9844a2](https://github.com/angular/angular/commit/c9844a2))
-* **platform-server:** update domino to v2.1.0 ([#25564](https://github.com/angular/angular/issues/25564)) ([3fb0da2](https://github.com/angular/angular/commit/3fb0da2))
-* **router:** warn if navigation triggered outside Angular zone ([#24959](https://github.com/angular/angular/issues/24959)) ([010e35d](https://github.com/angular/angular/commit/010e35d)), closes [#15770](https://github.com/angular/angular/issues/15770) [#15946](https://github.com/angular/angular/issues/15946) [#24728](https://github.com/angular/angular/issues/24728)
-* **router:** add UrlSegment[] to CanLoad interface ([#13127](https://github.com/angular/angular/issues/13127)) ([07d8d39](https://github.com/angular/angular/commit/07d8d39)), closes [#12411](https://github.com/angular/angular/issues/12411)
-
-
-
-### Bug Fixes
-
-* add mappings for ngfactory & ngsummary files to their module names in aot summary resolver ([#25335](https://github.com/angular/angular/issues/25335)) ([02e201a](https://github.com/angular/angular/commit/02e201a))
-* **bazel:** Cache fileNameToModuleName lookups ([#25731](https://github.com/angular/angular/issues/25731)) ([f394ba0](https://github.com/angular/angular/commit/f394ba0))
-* **bazel:** allow compile_strategy to be (privately) imported ([#25080](https://github.com/angular/angular/issues/25080)) ([0d1d589](https://github.com/angular/angular/commit/0d1d589))
-* **bazel:** correct type concatenated to devmode_js ([#25467](https://github.com/angular/angular/issues/25467)) ([fb2c524](https://github.com/angular/angular/commit/fb2c524))
-* **bazel:** move bazel managed runtime deps for downstream usage ([#25690](https://github.com/angular/angular/issues/25690)) ([6ed7993](https://github.com/angular/angular/commit/6ed7993))
-* **bazel:** only lookup amd module-name tags in .d.ts files ([#25710](https://github.com/angular/angular/issues/25710)) ([42072c4](https://github.com/angular/angular/commit/42072c4))
-* **bazel:** protractor rule should include *.e2e-spec.js ([#25701](https://github.com/angular/angular/issues/25701)) ([3809e0f](https://github.com/angular/angular/commit/3809e0f))
-* **bazel:** specify the package and lock files using the workspace ([#25694](https://github.com/angular/angular/issues/25694)) ([ddc1335](https://github.com/angular/angular/commit/ddc1335))
-* **benchpress:** Use performance.mark() instead of console.time() ([#24114](https://github.com/angular/angular/issues/24114)) ([06d0400](https://github.com/angular/angular/commit/06d0400))
-* **common:** register locale data for all equivalent closure locales ([#25867](https://github.com/angular/angular/issues/25867)) ([d83f9d4](https://github.com/angular/angular/commit/d83f9d4))
-* **compiler-cli:** correct realPath to realpath. ([#25023](https://github.com/angular/angular/issues/25023)) ([01e6dab](https://github.com/angular/angular/commit/01e6dab))
-* **compiler-cli:** use the oldProgram option in watch mode ([#21364](https://github.com/angular/angular/issues/21364)) ([c6e5b97](https://github.com/angular/angular/commit/c6e5b97)), closes [#21361](https://github.com/angular/angular/issues/21361)
-* **compiler:** Fix look up of entryComponents in AOT Summaries ([#24892](https://github.com/angular/angular/issues/24892)) ([00d3666](https://github.com/angular/angular/commit/00d3666))
-* **compiler:** add hostVars and support pure functions in host bindings ([#25626](https://github.com/angular/angular/issues/25626)) ([b424b31](https://github.com/angular/angular/commit/b424b31))
-* **compiler:** update compiler to flatten nested template fns ([#24943](https://github.com/angular/angular/issues/24943)) ([fe14f18](https://github.com/angular/angular/commit/fe14f18))
-* **compiler:** update compiler to generate new slot allocations ([#25607](https://github.com/angular/angular/issues/25607)) ([27e2039](https://github.com/angular/angular/commit/27e2039))
-* **core:** In Testability.whenStable update callback, pass more complete ([#25010](https://github.com/angular/angular/issues/25010)) ([16c03c0](https://github.com/angular/angular/commit/16c03c0))
-* **core:** add missing `peerDependency ` to `[@angular](https://github.com/angular)/compiler` ([#26033](https://github.com/angular/angular/issues/26033)) ([549de1e](https://github.com/angular/angular/commit/549de1e)), closes [/github.com/angular/angular/commit/919f42fea1df4b9e38b7d688aef5f2de668e9d3e#diff-58563046c4439699f2e6a89187099a54](https://github.com//github.com/angular/angular/commit/919f42fea1df4b9e38b7d688aef5f2de668e9d3e/issues/diff-58563046c4439699f2e6a89187099a54)
-* **core:** allow null value for renderer setElement(…) ([#17065](https://github.com/angular/angular/issues/17065)) ([ff15043](https://github.com/angular/angular/commit/ff15043)), closes [#13686](https://github.com/angular/angular/issues/13686)
-* **core:** do not clear element content when using shadow dom ([#24861](https://github.com/angular/angular/issues/24861)) ([6e828bb](https://github.com/angular/angular/commit/6e828bb))
-* **core:** size regression with closure compiler ([#25531](https://github.com/angular/angular/issues/25531)) ([1f59f2f](https://github.com/angular/angular/commit/1f59f2f))
-* **core:** throw error message when @Output not initialized ([#19116](https://github.com/angular/angular/issues/19116)) ([adf510f](https://github.com/angular/angular/commit/adf510f)), closes [#3664](https://github.com/angular/angular/issues/3664)
-* **elements:** add compiler dependency ([#24861](https://github.com/angular/angular/issues/24861)) ([6143da6](https://github.com/angular/angular/commit/6143da6))
-* **elements:** add compiler to integration ([#24861](https://github.com/angular/angular/issues/24861)) ([a080ffc](https://github.com/angular/angular/commit/a080ffc))
-* **elements:** strict null checks ([#24861](https://github.com/angular/angular/issues/24861)) ([a8210d0](https://github.com/angular/angular/commit/a8210d0))
-* **router:** fix regression where navigateByUrl promise didn't resolve on CanLoad failure ([#26455](https://github.com/angular/angular/issues/26455)) ([1c9b065](https://github.com/angular/angular/commit/1c9b065)), closes [#26284](https://github.com/angular/angular/issues/26284)
-* **router:** mount correct component if router outlet was not instantiated and if using a route reuse strategy ([#25313](https://github.com/angular/angular/issues/25313)) ([#25314](https://github.com/angular/angular/issues/25314)) ([8dc2b11](https://github.com/angular/angular/commit/8dc2b11))
-* **router:** take base uri into account in `setUpLocationSync()` ([#20244](https://github.com/angular/angular/issues/20244)) ([ba1e25f](https://github.com/angular/angular/commit/ba1e25f)), closes [#20061](https://github.com/angular/angular/issues/20061)
-* **service-worker:** clean up caches from old SW versions ([#26319](https://github.com/angular/angular/issues/26319)) ([00b5c7b](https://github.com/angular/angular/commit/00b5c7b))
-* **service-worker:** do not blow up when caches are unwritable ([#26042](https://github.com/angular/angular/issues/26042)) ([2bd767c](https://github.com/angular/angular/commit/2bd767c))
-* **upgrade:** properly destroy upgraded component elements and descendants ([#26209](https://github.com/angular/angular/issues/26209)) ([071934e](https://github.com/angular/angular/commit/071934e)), closes [#26208](https://github.com/angular/angular/issues/26208)
-* **upgrade:** trigger `$destroy` event on upgraded component element ([#25357](https://github.com/angular/angular/issues/25357)) ([2a672a9](https://github.com/angular/angular/commit/2a672a9)), closes [#25334](https://github.com/angular/angular/issues/25334)
-
-
-
-
 <a name="6.1.10"></a>
 ## [6.1.10](https://github.com/angular/angular/compare/6.1.9...6.1.10) (2018-10-10)
 
@@ -258,11 +9,35 @@ To learn about the release highlights and our new CLI-powered update workflow fo
 
 
 
-
 <a name="6.1.9"></a>
 ## [6.1.9](https://github.com/angular/angular/compare/6.1.8...6.1.9) (2018-09-26)
 
 
+### Bug Fixes
+
+* **service-worker:** do not blow up when caches are unwritable ([#26042](https://github.com/angular/angular/issues/26042)) ([a169743](https://github.com/angular/angular/commit/a169743))
+
+
+
+<a name="6.1.8"></a>
+## [6.1.8](https://github.com/angular/angular/compare/6.1.7...6.1.8) (2018-09-19)
+
+
+### Bug Fixes
+
+* **bazel:** allow compile_strategy to be (privately) imported ([#25080](https://github.com/angular/angular/issues/25080)) ([2d0e642](https://github.com/angular/angular/commit/2d0e642))
+* **bazel:** correct type concatenated to devmode_js ([#25467](https://github.com/angular/angular/issues/25467)) ([91dd160](https://github.com/angular/angular/commit/91dd160))
+* **bazel:** move bazel managed runtime deps for downstream usage ([#25690](https://github.com/angular/angular/issues/25690)) ([48d7f4e](https://github.com/angular/angular/commit/48d7f4e))
+* **bazel:** specify the package and lock files using the workspace ([#25694](https://github.com/angular/angular/issues/25694)) ([678b420](https://github.com/angular/angular/commit/678b420))
+* **compiler:** Fix look up of entryComponents in AOT Summaries ([#24892](https://github.com/angular/angular/issues/24892)) ([a31cfc5](https://github.com/angular/angular/commit/a31cfc5))
+* **router:** mount correct component if router outlet was not instantiated and if using a route reuse strategy ([#25313](https://github.com/angular/angular/issues/25313)) ([#25314](https://github.com/angular/angular/issues/25314)) ([e117b1f](https://github.com/angular/angular/commit/e117b1f))
+
+
+### Features
+
+* **bazel:** add additional parameters to `ts_api_guardian_test` def ([#25694](https://github.com/angular/angular/issues/25694)) ([97ae7ae](https://github.com/angular/angular/commit/97ae7ae))
+* **ivy:** enable .ngfactory.js generation in g3 only ([#25392](https://github.com/angular/angular/issues/25392)) ([1c44b71](https://github.com/angular/angular/commit/1c44b71))
+
 
 
 <a name="6.1.7"></a>
@@ -291,8 +66,6 @@ To learn about the release highlights and our new CLI-powered update workflow fo
 
 Note: the 6.1.5 release on npm accidentally glitched-out midway, so we cut 6.1.6 instead. sorry! :-)
 
-
-
 <a name="6.1.4"></a>
 ## [6.1.4](https://github.com/angular/angular/compare/6.1.3...6.1.4) (2018-08-22)
 
@@ -327,6 +100,9 @@ Note: the 6.1.5 release on npm accidentally glitched-out midway, so we cut 6.1.6
 <a name="6.1.1"></a>
 ## [6.1.1](https://github.com/angular/angular/compare/6.1.0...6.1.1) (2018-08-02)
 
+
+### Bug Fixes
+
 * **compiler-cli:** correct tsickle dependency version to fix typescript 2.9 compatibility ([fec29fa](https://github.com/angular/angular/commit/317c7087c56b72aa74cd6d6a8f719e6e7fec29fa))
 
 

README.md

@@ -13,10 +13,12 @@ Angular is a development platform for building mobile and desktop web applicatio
 
 [Get started in 5 minutes][quickstart].
 
+
 ## Changelog
 
 [Learn about the latest improvements][changelog]. 
 
+
 ## Want to help?
 
 Want to file a bug, contribute some code, or improve documentation? Excellent! Read up on our

WORKSPACE

@@ -1,34 +1,89 @@
 workspace(name = "angular")
 
-load(
-    "//packages/bazel:package.bzl",
-    "rules_angular_dependencies",
-    "rules_angular_dev_dependencies",
+#
+# Download Bazel toolchain dependencies as needed by build actions
+#
+http_archive(
+    name = "build_bazel_rules_typescript",
+    url = "https://github.com/bazelbuild/rules_typescript/archive/0.17.0.zip",
+    strip_prefix = "rules_typescript-0.17.0",
+    sha256 = "1626ee2cc9770af6950bfc77dffa027f9aedf330fe2ea2ee7e504428927bd95d",
+)
+load("@build_bazel_rules_typescript//:package.bzl", "rules_typescript_dependencies")
+rules_typescript_dependencies()
+
+http_archive(
+  name = "bazel_toolchains",
+  urls = [
+    "https://mirror.bazel.build/github.com/bazelbuild/bazel-toolchains/archive/5124557861ebf4c0b67f98180bff1f8551e0b421.tar.gz",
+    "https://github.com/bazelbuild/bazel-toolchains/archive/5124557861ebf4c0b67f98180bff1f8551e0b421.tar.gz",
+  ],
+  strip_prefix = "bazel-toolchains-5124557861ebf4c0b67f98180bff1f8551e0b421",
+  sha256 = "c3b08805602cd1d2b67ebe96407c1e8c6ed3d4ce55236ae2efe2f1948f38168d",
 )
 
-# Uncomment for local bazel rules development
-#local_repository(
-#    name = "build_bazel_rules_nodejs",
-#    path = "../rules_nodejs",
-#)
-#local_repository(
-#    name = "build_bazel_rules_typescript",
-#    path = "../rules_typescript",
-#)
+http_archive(
+    name = "io_bazel_rules_sass",
+    url = "https://github.com/bazelbuild/rules_sass/archive/1.11.0.zip",
+    strip_prefix = "rules_sass-1.11.0",
+    sha256 = "dbe9fb97d5a7833b2a733eebc78c9c1e3880f676ac8af16e58ccf2139cbcad03",
+)
 
-# Angular Bazel users will call this function
-rules_angular_dependencies()
-# These are the dependencies only for us
-rules_angular_dev_dependencies()
+# This commit matches the version of buildifier in angular/ngcontainer
+# If you change this, also check if it matches the version in the angular/ngcontainer
+# version in /.circleci/config.yml
+BAZEL_BUILDTOOLS_VERSION = "49a6c199e3fbf5d94534b2771868677d3f9c6de9"
+
+http_archive(
+    name = "com_github_bazelbuild_buildtools",
+    url = "https://github.com/bazelbuild/buildtools/archive/%s.zip" % BAZEL_BUILDTOOLS_VERSION,
+    strip_prefix = "buildtools-%s" % BAZEL_BUILDTOOLS_VERSION,
+    sha256 = "edf39af5fc257521e4af4c40829fffe8fba6d0ebff9f4dd69a6f8f1223ae047b",
+)
+
+# Fetching the Bazel source code allows us to compile the Skylark linter
+http_archive(
+    name = "io_bazel",
+    url = "https://github.com/bazelbuild/bazel/archive/0.17.1.zip",
+    strip_prefix = "bazel-0.17.1",
+    sha256 = "ace8cced3b21e64a8fdad68508e9b0644201ec848ad583651719841d567fc66d",
+)
+
+http_archive(
+    name = "io_bazel_skydoc",
+    # TODO: switch to upstream when https://github.com/bazelbuild/skydoc/pull/103 is merged
+    url = "https://github.com/alexeagle/skydoc/archive/fe2e9f888d28e567fef62ec9d4a93c425526d701.zip",
+    strip_prefix = "skydoc-fe2e9f888d28e567fef62ec9d4a93c425526d701",
+    sha256 = "7bfb5545f59792a2745f2523b9eef363f9c3e7274791c030885e7069f8116016",
+)
+
+# We have a source dependency on the Devkit repository, because it's built with
+# Bazel.
+# This allows us to edit sources and have the effect appear immediately without
+# re-packaging or "npm link"ing.
+# Even better, things like aspects will visit the entire graph including
+# ts_library rules in the devkit repository.
+http_archive(
+    name = "angular_cli",
+    url = "https://github.com/angular/angular-cli/archive/v6.1.0-rc.0.zip",
+    strip_prefix = "angular-cli-6.1.0-rc.0",
+    sha256 = "8cf320ea58c321e103f39087376feea502f20eaf79c61a4fdb05c7286c8684fd",
+)
+
+http_archive(
+    name = "org_brotli",
+    url = "https://github.com/google/brotli/archive/v1.0.5.zip",
+    strip_prefix = "brotli-1.0.5",
+    sha256 = "774b893a0700b0692a76e2e5b7e7610dbbe330ffbe3fe864b4b52ca718061d5a",
+)
 
 #
 # Point Bazel to WORKSPACEs that live in subdirectories
 #
-http_archive(
+
+local_repository(
     name = "rxjs",
-    url = "https://registry.yarnpkg.com/rxjs/-/rxjs-6.3.3.tgz",
-    strip_prefix = "package/src",
-    sha256 = "72b0b4e517f43358f554c125e40e39f67688cd2738a8998b4a266981ed32f403",
+    path = "node_modules/rxjs/src",
 )
 
 # Point to the integration test workspace just so that Bazel doesn't descend into it
@@ -41,37 +96,29 @@ local_repository(
 #
 # Load and install our dependencies downloaded above.
 #
-load("@build_bazel_rules_nodejs//:defs.bzl", "check_bazel_version", "node_repositories", "yarn_install")
 
-check_bazel_version("0.18.0", """
+load("@build_bazel_rules_nodejs//:defs.bzl", "check_bazel_version", "node_repositories")
+
+check_bazel_version("0.17.0", """
 If you are on a Mac and using Homebrew, there is a breaking change to the installation in Bazel 0.16
 See https://blog.bazel.build/2018/08/22/bazel-homebrew.html
 
 """)
-
 node_repositories(
-    node_version = "10.9.0",
     package_json = ["//:package.json"],
     preserve_symlinks = True,
-    yarn_version = "1.12.1",
-)
-
-yarn_install(
-    name = "npm",
-    package_json = "//tools:npm/package.json",
-    yarn_lock = "//tools:npm/yarn.lock",
+    node_version = "10.9.0",
+    yarn_version = "1.9.2",
 )
 
 load("@io_bazel_rules_go//go:def.bzl", "go_rules_dependencies", "go_register_toolchains")
 
 go_rules_dependencies()
-
 go_register_toolchains()
 
 load("@io_bazel_rules_webtesting//web:repositories.bzl", "browser_repositories", "web_test_repositories")
 
 web_test_repositories()
-
 browser_repositories(
     chromium = True,
     firefox = True,
@@ -89,9 +136,7 @@ ng_setup_workspace()
 # Skylark documentation generation
 
 load("@io_bazel_rules_sass//sass:sass_repositories.bzl", "sass_repositories")
-
 sass_repositories()
 
 load("@io_bazel_skydoc//skylark:skylark.bzl", "skydoc_repositories")
-
 skydoc_repositories()

aio/aio-builds-setup/dockerbuild/scripts-js/yarn.lock

@@ -384,7 +384,7 @@ chalk@^1.1.3:
     strip-ansi "^3.0.0"
     supports-color "^2.0.0"
 
-chalk@^2.0.1, chalk@^2.3.0, chalk@^2.4.1:
+chalk@^2.0.1, chalk@^2.3.0:
   version "2.4.1"
   resolved "https://registry.yarnpkg.com/chalk/-/chalk-2.4.1.tgz#18c49ab16a037b6eb0152cc83e3471338215b66e"
   dependencies:
@@ -392,6 +392,15 @@ chalk@^2.0.1, chalk@^2.3.0, chalk@^2.4.1:
     escape-string-regexp "^1.0.5"
     supports-color "^5.3.0"
 
+chalk@^2.4.1:
+  version "2.4.2"
+  resolved "https://registry.yarnpkg.com/chalk/-/chalk-2.4.2.tgz#cd42541677a54333cf541a49108c1432b44c9424"
+  integrity sha512-Mti+f9lpJNcwF4tWV8/OrTTtF1gZi+f8FqlyAdouralcFWFQWF2+NgCHShjkCb+IFBLq9buZwE1xckQU4peSuQ==
+  dependencies:
+    ansi-styles "^3.2.1"
+    escape-string-regexp "^1.0.5"
+    supports-color "^5.3.0"
+
 check-error@^1.0.1:
   version "1.0.2"
   resolved "https://registry.yarnpkg.com/check-error/-/check-error-1.0.2.tgz#574d312edd88bb5dd8912e9286dd6c0aed4aac82"

aio/aio-builds-setup/docs/misc--integrate-with-ci.md

@@ -3,7 +3,7 @@
 
 TODO (gkalpak): Add docs. Mention:
 - Testing on CI.
-  Relevant files: `aio/aio-builds-setup/scripts/test.sh`
+  Relevant files: `scripts/ci/test-aio.sh`, `aio/aio-builds-setup/scripts/test.sh`
 - Deploying from CI.
   Relevant files: `.circleci/config.yml`, `scripts/ci/deploy.sh`, `aio/scripts/build-artifacts.sh`,
   `aio/scripts/deploy-to-firebase.sh`

aio/content/cli-src/.gitignore

@@ -1,3 +0,0 @@
-/node_modules
-package.json
-yarn.lock

aio/content/cli/index.md

@@ -1,100 +0,0 @@
-<h1 class="no-toc">CLI Command Reference</h1>
-
-The Angular CLI is a command-line interface tool that you use to initialize, develop, scaffold, and maintain Angular applications. You can use the tool directly in a command shell, or indirectly through an interactive UI such as [Angular Console](https://angularconsole.com).
-
-## Installing Angular CLI
-
-Major versions of Angular CLI follow the supported major version of Angular, but minor versions can be released separately.
-
-Install the CLI using the `npm` package manager:
-<code-example format="." language="bash">
-npm install -g @angular/cli
-</code-example>
-
-For details about changes between versions, and information about updating from previous releases,
-see the Releases tab on GitHub: https://github.com/angular/angular-cli/releases
-
-## Basic workflow
-
-Invoke the tool on the command line through the `ng` executable.
-Online help is available on the command line.
-Enter the following to list commands or options for a given command (such as [generate](cli/generate)) with a short description.
-
-<code-example format="." language="bash">
-ng help
-ng generate --help
-</code-example>
-
-To create, build, and serve a new, basic Angular project on a development server, go to the parent directory of your new workspace use the following commands:
-
-<code-example format="." language="bash">
-ng new my-first-project
-cd my-first-project
-ng serve
-</code-example>
-
-In your browser, open http://localhost:4200/ to see the new app run.
-When you use the [ng serve](cli/serve) command to build an app and serve it locally, the server automatically rebuilds the app and reloads the page when you change any of the source files.
-
-## Workspaces and project files
-
-The [ng new](cli/new) command creates an *Angular workspace* folder and generates a new app skeleton.
-A workspace can contain multiple apps and libraries.
-The initial app created by the [ng new](cli/new) command is at the top level of the workspace.
-When you generate an additional app or library in a workspace, it goes into a `projects/` subfolder.
-
-A newly generated app contains the source files for a root module, with a root component and template.
-Each app has a `src` folder that contains the logic, data, and assets.
-
-You can edit the generated files directly, or add to and modify them using CLI commands.
-Use the [ng generate](cli/generate) command to add new files for additional components and services, and code for new pipes, directives, and so on.
-Commands such as [add](cli/add) and [generate](cli/generate), which create or operate on apps and libraries, must be executed from within a workspace or project folder.
-
-* See more about the [Workspace file structure](guide/file-structure).
-
-### Workspace and project configuration
-
-A single workspace configuration file, `angular.json`, is created at the top level of the workspace.
-This is where you can set per-project defaults for CLI command options, and specify configurations to use when the CLI builds a project for different targets.
-
-The [ng config](cli/config) command lets you set and retrieve configuration values from the command line, or you can edit the `angular.json` file directly.
-Note that option names in the configuration file must use [camelCase](guide/glossary#case-types), while option names supplied to commands can use either camelCase or dash-case.
-
-* See more about [Workspace Configuration](guide/workspace-config).
-* See the [complete schema](https://github.com/angular/angular-cli/wiki/angular-workspace) for `angular.json`.
-
-## CLI command-language syntax
-
-Command syntax is shown as follows:
-
-`ng` *commandNameOrAlias* *requiredArg* [*optionalArg*] `[options]`
-
-* Most commands, and some options, have aliases. Aliases are shown in the syntax statement for each command.
-
-* Option names are prefixed with a double dash (--).
-    Option aliases are prefixed with a single dash (-).
-    Arguments are not prefixed.
-    For example: `ng build my-app -c production`
-
-* Typically, the name of a generated artifact can be given as an argument to the command or specified with the --name option.
-
-* Argument and option names can be given in either
-[camelCase or dash-case](guide/glossary#case-types).
-`--myOptionName` is equivalent to `--my-option-name`.
-
-### Boolean and enumerated options
-
-Boolean options have two forms: `--thisOption` sets the flag, `--noThisOption` clears it.
-If neither option is supplied, the flag remains in its default state, as listed in the reference documentation.
-
-Allowed values are given with each enumerated option description, with the default value in **bold**.
-
-### Relative paths
-
-Options that specify files can be given as absolute paths, or as paths relative to the current working directory, which is generally either the workspace or project root.
-
-### Schematics
-
-The [ng generate](cli/generate) and  [ng add](cli/add) commands take as an argument the artifact or library to be generated or added to the current project.
-In addition to any general options, each artifact or library defines its own options in a *schematic*.
-Schematic options are supplied to the command in the same format as immediate command options.

aio/content/examples/animations/e2e/src/app.e2e-spec.ts

@@ -1,6 +1,6 @@
 'use strict'; // necessary for es6 output in node
 
-import { browser, ExpectedConditions as EC } from 'protractor';
+import { browser } from 'protractor';
 import { logging } from 'selenium-webdriver';
 import * as openClose from './open-close.po';
 import * as statusSlider from './status-slider.po';
@@ -25,8 +25,6 @@ describe('Animation Tests', () => {
   });
 
   describe('Open/Close Component', () => {
-    const closedHeight = '100px';
-    const openHeight = '200px';
 
     beforeAll(async () => {
       await openCloseHref.click();
@@ -34,37 +32,37 @@ describe('Animation Tests', () => {
     });
 
     it('should be open', async () => {
+      let text = await openClose.getComponentText();
       const toggleButton = openClose.getToggleButton();
       const container = openClose.getComponentContainer();
-      let text = await container.getText();
 
       if (text.includes('Closed')) {
         await toggleButton.click();
-        await browser.wait(async () => await container.getCssValue('height') === openHeight, 2000);
+        sleepFor();
       }
 
-      text = await container.getText();
+      text = await openClose.getComponentText();
       const containerHeight = await container.getCssValue('height');
 
       expect(text).toContain('The box is now Open!');
-      expect(containerHeight).toBe(openHeight);
+      expect(containerHeight).toBe('200px');
     });
 
     it('should be closed', async () => {
+      let text = await openClose.getComponentText();
       const toggleButton = openClose.getToggleButton();
       const container = openClose.getComponentContainer();
-      let text = await container.getText();
 
       if (text.includes('Open')) {
         await toggleButton.click();
-        await browser.wait(async () => await container.getCssValue('height') === closedHeight, 2000);
+        sleepFor();
       }
 
-      text = await container.getText();
+      text = await openClose.getComponentText();
       const containerHeight = await container.getCssValue('height');
 
       expect(text).toContain('The box is now Closed!');
-      expect(containerHeight).toBe(closedHeight);
+      expect(containerHeight).toBe('100px');
     });
 
     it('should log animation events', async () => {
@@ -74,7 +72,8 @@ describe('Animation Tests', () => {
       await toggleButton.click();
 
       const logs = await browser.manage().logs().get(logging.Type.BROWSER);
-      const animationMessages = logs.filter(({ message }) => message.includes('Animation'));
+
+      const animationMessages = logs.filter(({ message }) => message.indexOf('Animation') !== -1 ? true : false);
 
       expect(animationMessages.length).toBeGreaterThan(0);
     });
@@ -90,16 +89,16 @@ describe('Animation Tests', () => {
     });
 
     it('should be inactive with an orange background', async () => {
+      let text = await statusSlider.getComponentText();
       const toggleButton = statusSlider.getToggleButton();
       const container = statusSlider.getComponentContainer();
-      let text = await container.getText();
 
       if (text === 'Active') {
         await toggleButton.click();
-        await browser.wait(async () => await container.getCssValue('backgroundColor') === inactiveColor, 2000);
+        sleepFor(2000);
       }
 
-      text = await container.getText();
+      text = await statusSlider.getComponentText();
       const bgColor = await container.getCssValue('backgroundColor');
 
       expect(text).toBe('Inactive');
@@ -107,16 +106,16 @@ describe('Animation Tests', () => {
     });
 
     it('should be active with a blue background', async () => {
+      let text = await statusSlider.getComponentText();
       const toggleButton = statusSlider.getToggleButton();
       const container = statusSlider.getComponentContainer();
-      let text = await container.getText();
 
       if (text === 'Inactive') {
         await toggleButton.click();
-        await browser.wait(async () => await container.getCssValue('backgroundColor') === activeColor, 2000);
+        sleepFor(2000);
       }
 
-      text = await container.getText();
+      text = await statusSlider.getComponentText();
       const bgColor = await container.getCssValue('backgroundColor');
 
       expect(text).toBe('Active');
@@ -164,7 +163,10 @@ describe('Animation Tests', () => {
       const hero = heroesList.get(0);
 
       await hero.click();
-      await browser.wait(async () => await heroesList.count() < total, 2000);
+      await sleepFor(100);
+      const newTotal = await heroesList.count();
+
+      expect(newTotal).toBeLessThan(total);
     });
   });
 
@@ -188,7 +190,10 @@ describe('Animation Tests', () => {
       const hero = heroesList.get(0);
 
       await hero.click();
-      await browser.wait(async () => await heroesList.count() < total, 2000);
+      await sleepFor(250);
+      const newTotal = await heroesList.count();
+
+      expect(newTotal).toBeLessThan(total);
     });
   });
 
@@ -208,14 +213,14 @@ describe('Animation Tests', () => {
     it('should filter down the list when a search is performed', async () => {
       const heroesList = filterStagger.getHeroesList();
       const total = await heroesList.count();
-
       const formInput = filterStagger.getFormInput();
+
       await formInput.sendKeys('Mag');
-
-      await browser.wait(async () => await heroesList.count() === 2, 2000);
-
+      await sleepFor(500);
       const newTotal = await heroesList.count();
+
       expect(newTotal).toBeLessThan(total);
+      expect(newTotal).toBe(2);
     });
   });
 
@@ -243,7 +248,10 @@ describe('Animation Tests', () => {
       const hero = heroesList.get(0);
 
       await hero.click();
-      await browser.wait(async () => await heroesList.count() < total, 2000);
+      await sleepFor(300);
+      const newTotal = await heroesList.count();
+
+      expect(newTotal).toBeLessThan(total);
     });
   });
 });

aio/content/examples/animations/e2e/src/open-close.po.ts

@@ -23,3 +23,11 @@ export function getComponentContainer() {
   const findContainer = () => by.css('div');
   return locate(getComponent(), findContainer());
 }
+
+export async function getComponentText() {
+  const findContainerText = () => by.css('div');
+  const contents = locate(getComponent(), findContainerText());
+  const componentText = await contents.getText();
+
+  return componentText;
+}

aio/content/examples/animations/e2e/src/status-slider.po.ts

@@ -18,3 +18,11 @@ export function getComponentContainer() {
   const findContainer = () => by.css('div');
   return locate(getComponent(), findContainer());
 }
+
+export async function getComponentText() {
+  const findContainerText = () => by.css('div');
+  const contents = locate(getComponent(), findContainerText());
+  const componentText = await contents.getText();
+
+  return componentText;
+}

aio/content/examples/cli-quickstart/src/app/app.component.ts

@@ -2,7 +2,7 @@
 import { Component } from '@angular/core';
 // #enddocregion import
 
-// #docregion metadata, component
+// #docregion metadata
 @Component({
   selector: 'app-root',
   templateUrl: './app.component.html',
@@ -13,4 +13,4 @@ import { Component } from '@angular/core';
 export class AppComponent {
   title = 'My First Angular App!';
 }
-// #enddocregion title, class, component
+// #enddocregion title, class

aio/content/examples/elements/e2e/src/app.e2e-spec.ts

@@ -1,23 +1,12 @@
 'use strict'; // necessary for es6 output in node
 
-import { browser, by, element, ElementFinder, ExpectedConditions as EC } from 'protractor';
+import { browser, by, element } from 'protractor';
 
 /* tslint:disable:quotemark */
 describe('Elements', () => {
   const messageInput = element(by.css('input'));
   const popupButtons = element.all(by.css('button'));
 
-  // Helpers
-  const click = (elem: ElementFinder) => {
-    // Waiting for the element to be clickable, makes the tests less flaky.
-    browser.wait(EC.elementToBeClickable(elem), 5000);
-    elem.click();
-  };
-  const waitForText = (elem: ElementFinder) => {
-    // Waiting for the element to have some text, makes the tests less flaky.
-    browser.wait(async () => /\S/.test(await elem.getText()), 5000);
-  }
-
   beforeEach(() => browser.get(''));
 
   describe('popup component', () => {
@@ -28,7 +17,7 @@ describe('Elements', () => {
     it('should be displayed on button click', () => {
       expect(popupComponent.isPresent()).toBe(false);
 
-      click(popupComponentButton);
+      popupComponentButton.click();
       expect(popupComponent.isPresent()).toBe(true);
     });
 
@@ -36,9 +25,7 @@ describe('Elements', () => {
       messageInput.clear();
       messageInput.sendKeys('Angular rocks!');
 
-      click(popupComponentButton);
-      waitForText(popupComponent);
-
+      popupComponentButton.click();
       expect(popupComponent.getText()).toContain('Popup: Angular rocks!');
     });
 
@@ -46,7 +33,7 @@ describe('Elements', () => {
       popupComponentButton.click();
       expect(popupComponent.isPresent()).toBe(true);
 
-      click(closeButton);
+      closeButton.click();
       expect(popupComponent.isPresent()).toBe(false);
     });
   });
@@ -59,7 +46,7 @@ describe('Elements', () => {
     it('should be displayed on button click', () => {
       expect(popupElement.isPresent()).toBe(false);
 
-      click(popupElementButton);
+      popupElementButton.click();
       expect(popupElement.isPresent()).toBe(true);
     });
 
@@ -67,9 +54,7 @@ describe('Elements', () => {
       messageInput.clear();
       messageInput.sendKeys('Angular rocks!');
 
-      click(popupElementButton);
-      waitForText(popupElement);
-
+      popupElementButton.click();
       expect(popupElement.getText()).toContain('Popup: Angular rocks!');
     });
 
@@ -77,7 +62,7 @@ describe('Elements', () => {
       popupElementButton.click();
       expect(popupElement.isPresent()).toBe(true);
 
-      click(closeButton);
+      closeButton.click();
       expect(popupElement.isPresent()).toBe(false);
     });
   });

aio/content/examples/forms/src/app/hero-form/hero-form.component.html

@@ -72,15 +72,15 @@
     <h2>You submitted the following:</h2>
     <div class="row">
       <div class="col-xs-3">Name</div>
-      <div class="col-xs-9">{{ model.name }}</div>
+      <div class="col-xs-9  pull-left">{{ model.name }}</div>
     </div>
     <div class="row">
       <div class="col-xs-3">Alter Ego</div>
-      <div class="col-xs-9">{{ model.alterEgo }}</div>
+      <div class="col-xs-9 pull-left">{{ model.alterEgo }}</div>
     </div>
     <div class="row">
       <div class="col-xs-3">Power</div>
-      <div class="col-xs-9">{{ model.power }}</div>
+      <div class="col-xs-9 pull-left">{{ model.power }}</div>
     </div>
     <br>
     <button class="btn btn-primary" (click)="submitted=false">Edit</button>

aio/content/examples/lazy-loading-ngmodules/src/app/app-routing.module.ts

@@ -8,11 +8,11 @@ import { Routes, RouterModule } from '@angular/router';
 const routes: Routes = [
   {
     path: 'customers',
-    loadChildren: './customers/customers.module#CustomersModule'
+    loadChildren: 'app/customers/customers.module#CustomersModule'
   },
   {
     path: 'orders',
-    loadChildren: './orders/orders.module#OrdersModule'
+    loadChildren: 'app/orders/orders.module#OrdersModule'
   },
   {
     path: '',

aio/content/examples/ngmodule-faq/src/app/app-routing.module.3.ts

@@ -5,8 +5,8 @@ import { ContactModule } from './contact/contact.module.3';
 
 const routes: Routes = [
   { path: '', redirectTo: 'contact', pathMatch: 'full'},
-  { path: 'crisis', loadChildren: './crisis/crisis.module#CrisisModule' },
-  { path: 'heroes', loadChildren: './hero/hero.module.3#HeroModule' }
+  { path: 'crisis', loadChildren: 'app/crisis/crisis.module#CrisisModule' },
+  { path: 'heroes', loadChildren: 'app/hero/hero.module.3#HeroModule' }
 ];
 
 @NgModule({

aio/content/examples/ngmodule-faq/src/app/app-routing.module.ts

@@ -8,8 +8,8 @@ import { ContactModule }    from './contact/contact.module';
 const routes: Routes = [
   { path: '', redirectTo: 'contact', pathMatch: 'full'},
   // #docregion lazy-routes
-  { path: 'crisis', loadChildren: './crisis/crisis.module#CrisisModule' },
-  { path: 'heroes', loadChildren: './hero/hero.module#HeroModule' }
+  { path: 'crisis', loadChildren: 'app/crisis/crisis.module#CrisisModule' },
+  { path: 'heroes', loadChildren: 'app/hero/hero.module#HeroModule' }
   // #enddocregion lazy-routes
 ];
 // #enddocregion routes

aio/content/examples/ngmodules/src/app/app-routing.module.ts

@@ -3,8 +3,8 @@ import { Routes, RouterModule } from '@angular/router';
 
 export const routes: Routes = [
   { path: '', redirectTo: 'contact', pathMatch: 'full'},
-  { path: 'items', loadChildren: './items/items.module#ItemsModule' },
-  { path: 'customers', loadChildren: './customers/customers.module#CustomersModule' }
+  { path: 'items', loadChildren: 'app/items/items.module#ItemsModule' },
+  { path: 'customers', loadChildren: 'app/customers/customers.module#CustomersModule' }
 ];
 
 @NgModule({

aio/content/examples/reactive-forms/e2e/src/app.e2e-spec.ts

@@ -35,14 +35,14 @@ describe('Reactive forms', function () {
 
     it('should update the name control when the Update Name button is clicked', async () => {
       await nameInput.sendKeys(nameText);
-      const value1 = await nameInput.getAttribute('value');
+      const value = await nameInput.getAttribute('value');
 
-      expect(value1).toBe(nameText);
+      expect(value).toBe(nameText);
       await updateButton.click();
 
-      const value2 = await nameInput.getAttribute('value');
+      const value = await nameInput.getAttribute('value');
 
-      expect(value2).toBe('Nancy');
+      expect(value).toBe('Nancy');
     });
 
     it('should update the displayed control value when the name control updated', async () => {

aio/content/examples/security/e2e/src/app.e2e-spec.ts

@@ -10,7 +10,7 @@ describe('Security E2E Tests', () => {
     expect(interpolated.getText())
         .toContain('Template <script>alert("0wned")</script> <b>Syntax</b>');
     let bound = element(By.className('e2e-inner-html-bound'));
-    expect(bound.getText()).toContain('Template Syntax');
+    expect(bound.getText()).toContain('Template alert("0wned") Syntax');
     let bold = element(By.css('.e2e-inner-html-bound b'));
     expect(bold.getText()).toContain('Syntax');
   });

aio/content/examples/testing/src/app/app-routing.module.ts

@@ -8,7 +8,7 @@ import { AboutComponent } from './about/about.component';
     RouterModule.forRoot([
       { path: '', redirectTo: 'dashboard', pathMatch: 'full'},
       { path: 'about', component: AboutComponent },
-      { path: 'heroes', loadChildren: './hero/hero.module#HeroModule'}
+      { path: 'heroes', loadChildren: 'app/hero/hero.module#HeroModule'}
     ])
   ],
   exports: [ RouterModule ] // re-export the module declarations

aio/content/examples/toh-pt0/src/styles.1.css

@@ -12,7 +12,7 @@ h2, h3 {
 body {
   margin: 2em;
 }
-body, input[type="text"], button {
+body, input[text], button {
   color: #888;
   font-family: Cambria, Georgia;
 }

aio/content/examples/toh-pt6/src/app/hero-search/hero-search.component.html

@@ -2,7 +2,7 @@
   <h4>Hero Search</h4>
 
   <!-- #docregion input -->
-  <input #searchBox id="search-box" (input)="search(searchBox.value)" />
+  <input #searchBox id="search-box" (keyup)="search(searchBox.value)" />
   <!-- #enddocregion input -->
 
   <ul class="search-result">

aio/content/examples/toh-pt6/src/app/hero.service.ts

@@ -40,7 +40,7 @@ export class HeroService {
   // #enddocregion getHeroes-1
       .pipe(
         // #enddocregion getHeroes-2
-        tap(_ => this.log('fetched heroes')),
+        tap(heroes => this.log('fetched heroes')),
         // #docregion getHeroes-2
         catchError(this.handleError('getHeroes', []))
       );

aio/content/examples/toh-pt6/src/app/in-memory-data.service.ts

@@ -1,11 +1,7 @@
 // #docregion , init
 import { InMemoryDbService } from 'angular-in-memory-web-api';
 import { Hero } from './hero';
-import { Injectable } from '@angular/core';
 
-@Injectable({
-  providedIn: 'root',
-})
 export class InMemoryDataService implements InMemoryDbService {
   createDb() {
     const heroes = [

aio/content/examples/universal/src/app/hero-search/hero-search.component.html

@@ -1,7 +1,7 @@
 <div id="search-component">
   <h4>Hero Search</h4>
 
-  <input #searchBox id="search-box" (input)="search(searchBox.value)" />
+  <input #searchBox id="search-box" (keyup)="search(searchBox.value)" />
 
   <ul class="search-result">
     <li *ngFor="let hero of heroes | async" >

aio/content/examples/upgrade-phonecat-1-typescript/e2e-spec.ts

@@ -1,6 +1,6 @@
 'use strict'; // necessary for es6 output in node
 
-import { browser, element, by, ElementArrayFinder, ElementFinder } from 'protractor';
+import { browser, element, by, ElementFinder } from 'protractor';
 
 // Angular E2E Testing Guide:
 // https://docs.angularjs.org/guide/e2e-testing
@@ -20,12 +20,6 @@ describe('PhoneCat Application', function() {
 
   describe('View: Phone list', function() {
 
-    // Helpers
-    const waitForCount = (elems: ElementArrayFinder, count: number) => {
-      // Wait for the list to stabilize, which may take a while (e.g. due to animations).
-      browser.wait(() => elems.count().then(c => c === count), 5000);
-    };
-
     beforeEach(function() {
       browser.get('index.html#!/phones');
     });
@@ -34,16 +28,13 @@ describe('PhoneCat Application', function() {
       let phoneList = element.all(by.repeater('phone in $ctrl.phones'));
       let query = element(by.model('$ctrl.query'));
 
-      waitForCount(phoneList, 20);
       expect(phoneList.count()).toBe(20);
 
       query.sendKeys('nexus');
-      waitForCount(phoneList, 1);
       expect(phoneList.count()).toBe(1);
 
       query.clear();
       query.sendKeys('motorola');
-      waitForCount(phoneList, 8);
       expect(phoneList.count()).toBe(8);
     });
 
@@ -60,7 +51,6 @@ describe('PhoneCat Application', function() {
       }
 
       queryField.sendKeys('tablet');   // Let's narrow the dataset to make the assertions shorter
-      waitForCount(phoneNameColumn, 2);
 
       expect(getNames()).toEqual([
         'Motorola XOOM\u2122 with Wi-Fi',
@@ -76,16 +66,10 @@ describe('PhoneCat Application', function() {
     });
 
     it('should render phone specific links', function() {
-      let phoneList = element.all(by.repeater('phone in $ctrl.phones'));
       let query = element(by.model('$ctrl.query'));
-
       query.sendKeys('nexus');
-      waitForCount(phoneList, 1);
 
-      let nexusPhone = phoneList.first();
-      let detailLink = nexusPhone.all(by.css('a')).first()
-
-      detailLink.click();
+      element.all(by.css('.phones li a')).first().click();
       expect(browser.getLocationAbsUrl()).toBe('/phones/nexus-s');
     });
 

aio/content/guide/ajs-quick-reference.md

@@ -202,10 +202,10 @@ The following are some of the key AngularJS built-in directives and their equiva
 
       ### Bootstrapping
 
-      <code-example hideCopy path="ajs-quick-reference/src/main.ts" header="main.ts" linenums="false"></code-example>
+      <code-example hideCopy path="ajs-quick-reference/src/main.ts" title="main.ts" linenums="false"></code-example>
       <br>
 
-      <code-example hideCopy path="ajs-quick-reference/src/app/app.module.1.ts" header="app.module.ts" linenums="false"></code-example>
+      <code-example hideCopy path="ajs-quick-reference/src/app/app.module.1.ts" title="app.module.ts" linenums="false"></code-example>
 
 
       Angular doesn't have a bootstrap directive.

aio/content/guide/animations.md

@@ -37,7 +37,7 @@ To get started with adding Angular animations to your project, import the animat
 
 Import `BrowserAnimationsModule`, which introduces the animation capabilities into your Angular root application module.
 
-<code-example path="animations/src/app/app.module.1.ts" header="src/app/app.module.ts" language="typescript" linenums="false">
+<code-example path="animations/src/app/app.module.1.ts" title="src/app/app.module.ts" language="typescript" linenums="false">
 </code-example>
 
 <div class="alert is-helpful">
@@ -49,7 +49,7 @@ Import `BrowserAnimationsModule`, which introduces the animation capabilities in
 
 If you plan to use specific animation functions in component files, import those functions from `@angular/animations`.
 
-<code-example path="animations/src/app/app.component.ts" header="src/app/app.component.ts" region="imports" language="typescript">
+<code-example path="animations/src/app/app.component.ts" title="src/app/app.component.ts" region="imports" language="typescript">
 </code-example>
 
 <div class="alert is-helpful">
@@ -61,7 +61,7 @@ If you plan to use specific animation functions in component files, import those
 
 In the component file, add a metadata property called `animations:` within the `@Component()` decorator. You put the trigger that defines an animation within the `animations` metadata property.
 
-<code-example path="animations/src/app/app.component.ts" header="src/app/app.component.ts" region="decorator" language="typescript">
+<code-example path="animations/src/app/app.component.ts" title="src/app/app.component.ts" region="decorator" language="typescript">
 </code-example>
 
 ## Animating a simple transition
@@ -82,12 +82,12 @@ Use the `style()` function to define a set of styles to associate with a given s
 
 Let's see how Angular's `state()` function works with the `style⁣­(⁠)` function to set CSS style attributes. In this code snippet, multiple style attributes are set at the same time for the state. In the `open` state, the button has a height of 200 pixels, an opacity of 1, and a background color of yellow.
 
-<code-example path="animations/src/app/open-close.component.ts" header="src/app/open-close.component.ts" region="state1" language="typescript">
+<code-example path="animations/src/app/open-close.component.ts" title="src/app/open-close.component.ts" region="state1" language="typescript">
 </code-example>
 
 In the `closed` state, shown below, the button has a height of 100 pixels, an opacity of 0.5, and a background color of green.
 
-<code-example path="animations/src/app/open-close.component.ts" header="src/app/open-close.component.ts" region="state2" language="typescript">
+<code-example path="animations/src/app/open-close.component.ts" title="src/app/open-close.component.ts" region="state2" language="typescript">
 </code-example>
 
 ### Transitions and timing
@@ -134,7 +134,7 @@ The third argument, `easing`, controls how the animation [accelerates and decele
 
 This example provides a state transition from `open` to `closed` with a one second transition between states.
 
-<code-example path="animations/src/app/open-close.component.ts" header="src/app/open-close.component.ts" language="typescript"
+<code-example path="animations/src/app/open-close.component.ts" title="src/app/open-close.component.ts" language="typescript"
 region="transition1">
 </code-example>
 
@@ -142,7 +142,7 @@ In the code snippet above, the `=>` operator indicates unidirectional transition
 
 This example adds a state transition from the `closed` state to the `open` state with a 0.5 second transition animation arc.
 
-<code-example path="animations/src/app/open-close.component.ts" header="src/app/open-close.component.ts" language="typescript"
+<code-example path="animations/src/app/open-close.component.ts" title="src/app/open-close.component.ts" language="typescript"
 region="transition2">
 </code-example>
 
@@ -180,7 +180,7 @@ In this example, we'll name the trigger `openClose`, and attach it to the `butto
 
 Animations are defined in the metadata of the component that controls the HTML element to be animated. Put the code that defines your animations under the `animations:` property within the `@Component()` decorator.
 
-<code-example path="animations/src/app/open-close.component.ts" header="src/app/open-close.component.ts" language="typescript"
+<code-example path="animations/src/app/open-close.component.ts" title="src/app/open-close.component.ts" language="typescript"
 region="component" linenums="false">
 </code-example>
 
@@ -194,7 +194,7 @@ The animation is executed or triggered when the expression value changes to a ne
 
 The following code snippet binds the trigger to the value of the `isOpen` property.
 
-<code-example path="animations/src/app/open-close.component.1.html" header="src/app/open-close.component.html"
+<code-example path="animations/src/app/open-close.component.1.html" title="src/app/open-close.component.html"
 region="compare">
 </code-example>
 
@@ -216,15 +216,15 @@ Here are the code files discussed in the transition example.
 
 <code-tabs>
 
-<code-pane header="src/app/open-close.component.ts" path="animations/src/app/open-close.component.ts" language="typescript"
+<code-pane title="src/app/open-close.component.ts" path="animations/src/app/open-close.component.ts" language="typescript"
 region="component">
 </code-pane>
 
-<code-pane header="src/app/open-close.component.html" path="animations/src/app/open-close.component.1.html"
+<code-pane title="src/app/open-close.component.html" path="animations/src/app/open-close.component.1.html"
 region="trigger">
 </code-pane>
 
-<code-pane header="src/app/open-close.component.css" path="animations/src/app/open-close.component.css">
+<code-pane title="src/app/open-close.component.css" path="animations/src/app/open-close.component.css">
 </code-pane>
 
 </code-tabs>

aio/content/guide/aot-compiler.md

@@ -8,7 +8,7 @@ This guide explains how to specify metadata and apply available compiler options
 
 <div class="alert is-helpful"
 
-  <a href="https://www.youtube.com/watch?v=kW9cJsvcsGo">Watch compiler author Tobias Bosch explain the Angular compiler</a> at AngularConnect 2016.
+  <a href="https://www.youtube.com/watch?v=kW9cJsvcsGo">Watch compiler author Tobias Bosch explain the Angular Compiler</a> at AngularConnect 2016.
 
 </div>
 
@@ -21,7 +21,7 @@ Angular offers two ways to compile your application:
 1. **_Just-in-Time_ (JIT)**, which compiles your app in the browser at runtime.
 1. **_Ahead-of-Time_ (AOT)**, which compiles your app at build time.
 
-JIT compilation is the default when you run the [`ng build`](cli/build) (build only) or [`ng serve`](cli/serve)  (build and serve locally) CLI commands: 
+JIT compilation is the default when you run the _build-only_ or the _build-and-serve-locally_ CLI commands:
 
 <code-example language="sh" class="code-shell">
   ng build
@@ -30,7 +30,7 @@ JIT compilation is the default when you run the [`ng build`](cli/build) (build o
 
 {@a compile}
 
-For AOT compilation, include the `--aot` option with the `ng build` or `ng serve` command:
+For AOT compilation, append the `--aot` flags to the _build-only_ or the _build-and-serve-locally_ CLI commands:
 
 <code-example language="sh" class="code-shell">
   ng build --aot
@@ -41,7 +41,7 @@ For AOT compilation, include the `--aot` option with the `ng build` or `ng serve
 
 The `ng build` command with the `--prod` meta-flag (`ng build --prod`) compiles with AOT by default.
 
-See the [CLI command reference](cli) and [Building and serving Angular apps](guide/build) for more information.
+See the [CLI documentation](https://github.com/angular/angular-cli/wiki) for details, especially the [`build` topic](https://github.com/angular/angular-cli/wiki/build).
 
 </div>
 
@@ -1308,28 +1308,6 @@ Chuck: After reviewing your PR comment I'm still at a loss. See [comment there](
   }
   ```
 
-{@a tsconfig-extends}
-## Configuration inheritance with extends
-Similar to TypeScript Compiler, Angular Compiler also supports `extends` in the `tsconfig.json` on `angularCompilerOptions`. A tsconfig file can inherit configurations from another file using the `extends` property.
- The `extends` is a top level property parallel to `compilerOptions` and `angularCompilerOptions`. 
- The configuration from the base file are loaded first, then overridden by those in the inheriting config file.
- Example:
-```json
-{
-  "extends": "../tsconfig.base.json",
-  "compilerOptions": {
-    "experimentalDecorators": true,
-    ...
-  },
-  "angularCompilerOptions": {
-    "fullTemplateTypeCheck": true,
-    "preserveWhitespaces": true,
-    ...
-  }
-}
-```
- More information about tsconfig extends can be found in the [TypeScript Handbook](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html).
-
 {@a compiler-options}
 ## Angular template compiler options
 

aio/content/guide/architecture-components.md

@@ -15,7 +15,7 @@ Its `selectHero()` method sets a `selectedHero` property when the user clicks to
 The component acquires the heroes from a service, which is a TypeScript [parameter property](http://www.typescriptlang.org/docs/handbook/classes.html#parameter-properties) on the constructor. 
 The service is provided to the component through the dependency injection system.
 
-<code-example path="architecture/src/app/hero-list.component.ts" linenums="false" header="src/app/hero-list.component.ts (class)" region="class"></code-example>
+<code-example path="architecture/src/app/hero-list.component.ts" linenums="false" title="src/app/hero-list.component.ts (class)" region="class"></code-example>
 
 Angular creates, updates, and destroys components as the user moves through the application. Your app can take action at each moment in this lifecycle through optional [lifecycle hooks](guide/lifecycle-hooks), like `ngOnInit()`.
 
@@ -31,7 +31,7 @@ In addition to containing or pointing to the template, the `@Component` metadata
 
 Here's an example of basic metadata for `HeroListComponent`.
 
-<code-example path="architecture/src/app/hero-list.component.ts" linenums="false" header="src/app/hero-list.component.ts (metadata)" region="metadata"></code-example>
+<code-example path="architecture/src/app/hero-list.component.ts" linenums="false" title="src/app/hero-list.component.ts (metadata)" region="metadata"></code-example>
 
 This example shows some of the most useful `@Component` configuration options:
 
@@ -63,7 +63,7 @@ A template looks like regular HTML, except that it also contains Angular [templa
 
 For example, here is a template for the Tutorial's `HeroListComponent`.
 
-<code-example path="architecture/src/app/hero-list.component.html" header="src/app/hero-list.component.html"></code-example>
+<code-example path="architecture/src/app/hero-list.component.html" title="src/app/hero-list.component.html"></code-example>
 
 This template uses typical HTML elements like `<h2>` and  `<p>`, and also includes Angular template-syntax elements,  `*ngFor`, `{{hero.name}}`, `(click)`, `[hero]`, and `<app-hero-detail>`. The template-syntax elements tell Angular how to render the HTML to the screen, using program logic and data.
 
@@ -87,7 +87,7 @@ The following diagram shows the four forms of data binding markup. Each form has
 
 This example from the `HeroListComponent` template uses three of these forms.
 
-<code-example path="architecture/src/app/hero-list.component.1.html" linenums="false" header="src/app/hero-list.component.html (binding)" region="binding"></code-example>
+<code-example path="architecture/src/app/hero-list.component.1.html" linenums="false" title="src/app/hero-list.component.html (binding)" region="binding"></code-example>
 
 * The `{{hero.name}}` [*interpolation*](guide/displaying-data#interpolation)
 displays the component's `hero.name` property value within the `<li>` element.
@@ -101,7 +101,7 @@ Two-way data binding (used mainly in [template-driven forms](guide/forms))
 combines property and event binding in a single notation. 
 Here's an example from the `HeroDetailComponent` template that uses two-way data binding with the `ngModel` directive.
 
-<code-example path="architecture/src/app/hero-detail.component.html" linenums="false" header="src/app/hero-detail.component.html (ngModel)" region="ngModel"></code-example>
+<code-example path="architecture/src/app/hero-detail.component.html" linenums="false" title="src/app/hero-detail.component.html (ngModel)" region="ngModel"></code-example>
 
 In two-way binding, a data property value flows to the input box from the component as with property binding.
 The user's changes also flow back to the component, resetting the property to the latest value,
@@ -164,7 +164,7 @@ Just as for components, the metadata for a directive associates the decorated cl
 *Structural directives* alter layout by adding, removing, and replacing elements in the DOM. 
 The example template uses two built-in structural directives to add application logic to how the view is rendered.
 
-<code-example path="architecture/src/app/hero-list.component.1.html" linenums="false" header="src/app/hero-list.component.html (structural)" region="structural"></code-example>
+<code-example path="architecture/src/app/hero-list.component.1.html" linenums="false" title="src/app/hero-list.component.html (structural)" region="structural"></code-example>
 
 * [`*ngFor`](guide/displaying-data#ngFor) is an iterative; it tells Angular to stamp out one `<li>` per hero in the `heroes` list.
 * [`*ngIf`](guide/displaying-data#ngIf) is a conditional; it includes the `HeroDetail` component only if a selected hero exists.
@@ -176,7 +176,7 @@ In templates they look like regular HTML attributes, hence the name.
 
 The `ngModel` directive, which implements two-way data binding, is an example of an attribute directive. `ngModel` modifies the behavior of an existing element (typically `<input>`) by setting its display value property and responding to change events.
 
-<code-example path="architecture/src/app/hero-detail.component.html" linenums="false" header="src/app/hero-detail.component.html (ngModel)" region="ngModel"></code-example>
+<code-example path="architecture/src/app/hero-detail.component.html" linenums="false" title="src/app/hero-detail.component.html (ngModel)" region="ngModel"></code-example>
 
 Angular has more pre-defined directives that either alter the layout structure
 (for example, [ngSwitch](guide/template-syntax#ngSwitch))

aio/content/guide/architecture-modules.md

@@ -23,7 +23,7 @@ An NgModule is defined by a class decorated with `@NgModule()`. The `@NgModule()
 
 Here's a simple root NgModule definition.
 
-<code-example path="architecture/src/app/mini-app.ts" region="module" header="src/app/app.module.ts" linenums="false"></code-example>
+<code-example path="architecture/src/app/mini-app.ts" region="module" title="src/app/app.module.ts" linenums="false"></code-example>
 
 <div class="alert is-helpful">
 
@@ -56,9 +56,7 @@ A component and its template together define a *view*. A component can contain a
 When you create a component, it's associated directly with a single view, called the *host view*. The host view can be the root of a view hierarchy, which can contain *embedded views*, which are in turn the host views of other components. Those components can be in the same NgModule, or can be imported from other NgModules. Views in the tree can be nested to any depth.
 
 <div class="alert is-helpful">
-
-**Note:** The hierarchical structure of views is a key factor in the way Angular detects and responds to changes in the DOM and app data.
-
+    **Note:** The hierarchical structure of views is a key factor in the way Angular detects and responds to changes in the DOM and app data. 
 </div>
 
 ## NgModules and JavaScript modules

aio/content/guide/architecture-next-steps.md

@@ -4,13 +4,13 @@ After you understand the basic Angular building blocks, you can begin to learn m
 about the features and tools that are available to help you develop and deliver Angular applications.
 Here are some key features.
 
-## Responsive programming
+## Responsive programming tools
 
 * [Lifecycle hooks](guide/lifecycle-hooks): Tap into key moments in the lifetime of a component, from its creation to its destruction, by implementing the lifecycle hook interfaces.
 
 * [Observables and event processing](guide/observables): How to use observables with components and services to publish and subscribe to messages of any type, such as user-interaction events and asynchronous operation results.
 
-## Client-server interaction
+## Client-server interaction tools
 
 * [HTTP](guide/http): Communicate with a server to get data, save data, and invoke server-side actions with an HTTP client.
 
@@ -28,28 +28,23 @@ without deep knowledge of animation techniques or CSS.
 
 ## Support for the development cycle
 
-* [Compilation](guide/aot-compiler): Angular provides just-in-time (JIT) compilation for the development environment, and ahead-of-time (AOT) compilation for the production environment.
-
 * [Testing platform](guide/testing): Run unit tests on your application parts as they interact with the Angular framework.
 
 * [Internationalization](guide/i18n):  Make your app available in multiple languages with Angular's internationalization (i18n) tools.
 
+* [Compilation](guide/aot-compiler): Angular provides just-in-time (JIT) compilation for the development environment, and ahead-of-time (AOT) compilation for the production environment.
+
 * [Security guidelines](guide/security): Learn about Angular's built-in protections against common web-app vulnerabilities and attacks such as cross-site scripting attacks.
 
-## Setup, build, and deployment configuration
+## Setup and deployment tools
 
-* [CLI Command Reference](cli): The Angular CLI is a command-line tool that you use to create projects, generate application and library code, and perform a variety of ongoing development tasks such as testing, bundling, and deployment.
+* [Setup for local development](guide/setup): Set up a new project for development with QuickStart.
 
-* [Workspace and File Structure](guide/file-structure): Understand the structure of Angular workspace and project folders. 
-
-* [npm Packages](guide/npm-packages): The Angular Framework, Angular CLI, and components used by Angular applications are packaged as [npm](https://docs.npmjs.com/) packages and distributed via the npm registry. The Angular CLI creates a default `package.json` file, which specifies a starter set of packages that work well together and jointly support many common application scenarios.
+* [Installation](guide/npm-packages): The [Angular CLI](https://cli.angular.io/), Angular applications, and Angular itself depend on features and functionality provided by libraries that are available as [npm](https://docs.npmjs.com/) packages.
 
 * [TypeScript configuration](guide/typescript-configuration): TypeScript is the primary language for Angular application development.
 
 * [Browser support](guide/browser-support): Make your apps compatible across a wide range of browsers.
 
-* [Building and Serving](guide/build): Learn to define different build and proxy server configurations for your project, such as development, staging, and production.
-
 * [Deployment](guide/deployment): Learn techniques for deploying your Angular application to a remote server.
 
-

aio/content/guide/architecture-services.md

@@ -28,11 +28,11 @@ available to components through *dependency injection*.
 
 Here's an example of a service class that logs to the browser console.
 
-<code-example path="architecture/src/app/logger.service.ts" linenums="false" header="src/app/logger.service.ts (class)" region="class"></code-example>
+<code-example path="architecture/src/app/logger.service.ts" linenums="false" title="src/app/logger.service.ts (class)" region="class"></code-example>
 
 Services can depend on other services. For example, here's a `HeroService` that depends on the `Logger` service, and also uses `BackendService` to get heroes. That service in turn might depend on the `HttpClient` service to fetch heroes asynchronously from a server.
 
-<code-example path="architecture/src/app/hero.service.ts" linenums="false" header="src/app/hero.service.ts (class)" region="class"></code-example>
+<code-example path="architecture/src/app/hero.service.ts" linenums="false" title="src/app/hero.service.ts (class)" region="class"></code-example>
 
 ## Dependency injection (DI)
 
@@ -48,7 +48,7 @@ Similarly, use the `@Injectable()` decorator to indicate that a component or oth
 
 * An injector creates dependencies, and maintains a *container* of dependency instances that it reuses if possible.
 
-* A *provider* is an object that tells an injector how to obtain or create a dependency.
+* A *provider* is an object that tell an injector how to obtain or create a dependency.
 
 For any dependency that you need in your app, you must register a provider with the app's injector, 
 so that the injector can use the provider to create new instances. 
@@ -62,7 +62,7 @@ A dependency doesn't have to be a service&mdash;it could be a function, for exam
 
 When Angular creates a new instance of a component class, it determines which services or other dependencies that component needs by looking at the constructor parameter types. For example, the constructor of `HeroListComponent` needs `HeroService`.
 
-<code-example path="architecture/src/app/hero-list.component.ts" linenums="false" header="src/app/hero-list.component.ts (constructor)" region="ctor"></code-example>
+<code-example path="architecture/src/app/hero-list.component.ts" linenums="false" title="src/app/hero-list.component.ts (constructor)" region="ctor"></code-example>
 
 When Angular discovers that a component depends on a service, it first checks if the injector has any existing instances of that service. If a requested service instance doesn't yet exist, the injector makes one using the registered provider, and adds it to the injector before returning the service to Angular.
 
@@ -82,7 +82,7 @@ or you can register providers with specific modules or components.
 You register providers in the metadata of the service (in the `@Injectable()` decorator),
 or in the `@NgModule()` or `@Component()` metadata 
 
-* By default, the Angular CLI command [`ng generate service`](cli/generate) registers a provider with the root injector for your service by including provider metadata in the `@Injectable()` decorator. The tutorial uses this method to register the provider of  HeroService class definition.
+* By default, the Angular CLI command `ng generate service` registers a provider with the root injector for your service by including provider metadata in the `@Injectable()` decorator. The tutorial uses this method to register the provider of  HeroService class definition.
 
    ``` 
    @Injectable({
@@ -111,6 +111,6 @@ or in the `@NgModule()` or `@Component()` metadata
 service with each new instance of that component. 
 At the component level, register a service provider in the `providers` property of the `@Component()` metadata.
 
-   <code-example path="architecture/src/app/hero-list.component.ts" linenums="false" header="src/app/hero-list.component.ts (component providers)" region="providers"></code-example>
+   <code-example path="architecture/src/app/hero-list.component.ts" linenums="false" title="src/app/hero-list.component.ts (component providers)" region="providers"></code-example>
 
 For more detailed information, see the [Dependency Injection](guide/dependency-injection) section.

aio/content/guide/attribute-directives.md

@@ -37,13 +37,13 @@ This page demonstrates building a simple _appHighlight_ attribute
 directive to set an element's background color
 when the user hovers over that element. You can apply it like this:
 
-<code-example path="attribute-directives/src/app/app.component.1.html" linenums="false" header="src/app/app.component.html (applied)" region="applied"></code-example>
+<code-example path="attribute-directives/src/app/app.component.1.html" linenums="false" title="src/app/app.component.html (applied)" region="applied"></code-example>
 
 {@a write-directive}
 
 ### Write the directive code
 
-Create the directive class file in a terminal window with the CLI command [`ng generate directive`](cli/generate).
+Create the directive class file in a terminal window with this CLI command.
 
 <code-example language="sh" class="code-shell">
 ng generate directive highlight
@@ -59,9 +59,9 @@ _Directives_ must be declared in [Angular Modules](guide/ngmodules) in the same
 
 The generated `src/app/highlight.directive.ts` is as follows:
 
-<code-example path="attribute-directives/src/app/highlight.directive.0.ts" header="src/app/highlight.directive.ts"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.0.ts" title="src/app/highlight.directive.ts"></code-example>
 
-The imported `Directive` symbol provides Angular the `@Directive` decorator.
+The imported `Directive` symbol provides the Angular the `@Directive` decorator.
 
 The `@Directive` decorator's lone configuration property specifies the directive's
 [CSS attribute selector](https://developer.mozilla.org/en-US/docs/Web/CSS/Attribute_selectors), `[appHighlight]`.
@@ -92,7 +92,7 @@ Exporting `HighlightDirective` makes the directive accessible.
 
 Now edit the generated `src/app/highlight.directive.ts` to look as follows:
 
-<code-example path="attribute-directives/src/app/highlight.directive.1.ts" header="src/app/highlight.directive.ts"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.1.ts" title="src/app/highlight.directive.ts"></code-example>
 
 The `import` statement specifies an additional `ElementRef` symbol from the Angular `core` library:
 
@@ -111,7 +111,7 @@ This first implementation sets the background color of the host element to yello
 
 To use the new `HighlightDirective`, add a paragraph (`<p>`) element to the template of the root `AppComponent` and apply the directive as an attribute.
 
-<code-example path="attribute-directives/src/app/app.component.1.html" header="src/app/app.component.html" region="applied"></code-example>
+<code-example path="attribute-directives/src/app/app.component.1.html" title="src/app/app.component.html" region="applied"></code-example>
 
 Now run the application to see the `HighlightDirective` in action.
 
@@ -136,12 +136,12 @@ and respond by setting or clearing the highlight color.
 
 Begin by adding `HostListener` to the list of imported symbols.
 
-<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" header="src/app/highlight.directive.ts (imports)" region="imports"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" title="src/app/highlight.directive.ts (imports)" region="imports"></code-example>
 
 Then add two eventhandlers that respond when the mouse enters or leaves,
 each adorned by the `HostListener` decorator.
 
-<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" header="src/app/highlight.directive.ts (mouse-methods)" region="mouse-methods"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" title="src/app/highlight.directive.ts (mouse-methods)" region="mouse-methods"></code-example>
 
 The `@HostListener` decorator lets you subscribe to events of the DOM
 element that hosts an attribute directive, the `<p>` in this case.
@@ -162,11 +162,11 @@ The handlers delegate to a helper method that sets the color on the host DOM ele
 The helper method, `highlight`, was extracted from the constructor.
 The revised constructor simply declares the injected `el: ElementRef`.
 
-<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" header="src/app/highlight.directive.ts (constructor)" region="ctor"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" title="src/app/highlight.directive.ts (constructor)" region="ctor"></code-example>
 
 Here's the updated directive in full:
 
-<code-example path="attribute-directives/src/app/highlight.directive.2.ts" header="src/app/highlight.directive.ts"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.2.ts" title="src/app/highlight.directive.ts"></code-example>
 
 Run the app and confirm that the background color appears when
 the mouse hovers over the `p` and disappears as it moves out.
@@ -183,11 +183,11 @@ Currently the highlight color is hard-coded _within_ the directive. That's infle
 In this section, you give the developer the power to set the highlight color while applying the directive.
 
 Begin by adding `Input` to the list of symbols imported from `@angular/core`.
-<code-example path="attribute-directives/src/app/highlight.directive.3.ts" linenums="false" header="src/app/highlight.directive.ts (imports)" region="imports"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.3.ts" linenums="false" title="src/app/highlight.directive.ts (imports)" region="imports"></code-example>
 
 Add a `highlightColor` property to the directive class like this:
 
-<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" header="src/app/highlight.directive.ts (highlightColor)" region="color"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" title="src/app/highlight.directive.ts (highlightColor)" region="color"></code-example>
 
 {@a input}
 
@@ -200,19 +200,19 @@ Without that input metadata, Angular rejects the binding; see [below](guide/attr
 
 Try it by adding the following directive binding variations to the `AppComponent` template:
 
-<code-example path="attribute-directives/src/app/app.component.1.html" linenums="false" header="src/app/app.component.html (excerpt)" region="color-1"></code-example>
+<code-example path="attribute-directives/src/app/app.component.1.html" linenums="false" title="src/app/app.component.html (excerpt)" region="color-1"></code-example>
 
 Add a `color` property to the `AppComponent`.
 
-<code-example path="attribute-directives/src/app/app.component.1.ts" linenums="false" header="src/app/app.component.ts (class)" region="class"></code-example>
+<code-example path="attribute-directives/src/app/app.component.1.ts" linenums="false" title="src/app/app.component.ts (class)" region="class"></code-example>
 
 Let it control the highlight color with a property binding.
 
-<code-example path="attribute-directives/src/app/app.component.1.html" linenums="false" header="src/app/app.component.html (excerpt)" region="color-2"></code-example>
+<code-example path="attribute-directives/src/app/app.component.1.html" linenums="false" title="src/app/app.component.html (excerpt)" region="color-2"></code-example>
 
 That's good, but it would be nice to _simultaneously_ apply the directive and set the color _in the same attribute_ like this.
 
-<code-example path="attribute-directives/src/app/app.component.html" linenums="false" header="src/app/app.component.html (color)" region="color"></code-example>
+<code-example path="attribute-directives/src/app/app.component.html" linenums="false" title="src/app/app.component.html (color)" region="color"></code-example>
 
 The `[appHighlight]` attribute binding both applies the highlighting directive to the `<p>` element
 and sets the directive's highlight color with a property binding.
@@ -221,7 +221,7 @@ That's a crisp, compact syntax.
 
 You'll have to rename the directive's `highlightColor` property to `appHighlight` because that's now the color property binding name.
 
-<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" header="src/app/highlight.directive.ts (renamed to match directive selector)" region="color-2"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" title="src/app/highlight.directive.ts (renamed to match directive selector)" region="color-2"></code-example>
 
 This is disagreeable. The word, `appHighlight`, is a terrible property name and it doesn't convey the property's intent.
 
@@ -233,23 +233,23 @@ Fortunately you can name the directive property whatever you want _and_ **_alias
 
 Restore the original property name and specify the selector as the alias in the argument to `@Input`.
 
-<code-example path="attribute-directives/src/app/highlight.directive.ts" linenums="false" header="src/app/highlight.directive.ts (color property with alias)" region="color"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.ts" linenums="false" title="src/app/highlight.directive.ts (color property with alias)" region="color"></code-example>
 
 _Inside_ the directive the property is known as `highlightColor`.
 _Outside_ the directive, where you bind to it, it's known as `appHighlight`.
 
 You get the best of both worlds: the property name you want and the binding syntax you want:
 
-<code-example path="attribute-directives/src/app/app.component.html" linenums="false" header="src/app/app.component.html (color)" region="color"></code-example>
+<code-example path="attribute-directives/src/app/app.component.html" linenums="false" title="src/app/app.component.html (color)" region="color"></code-example>
 
 Now that you're binding via the alias to the `highlightColor`, modify the `onMouseEnter()` method to use that property.
 If someone neglects to bind to `appHighlightColor`, highlight the host element in red:
 
-<code-example path="attribute-directives/src/app/highlight.directive.3.ts" linenums="false" header="src/app/highlight.directive.ts (mouse enter)" region="mouse-enter"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.3.ts" linenums="false" title="src/app/highlight.directive.ts (mouse enter)" region="mouse-enter"></code-example>
 
 Here's the latest version of the directive class.
 
-<code-example path="attribute-directives/src/app/highlight.directive.3.ts" linenums="false" header="src/app/highlight.directive.ts (excerpt)"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.3.ts" linenums="false" title="src/app/highlight.directive.ts (excerpt)"></code-example>
 
 ## Write a harness to try it
 
@@ -259,11 +259,11 @@ lets you pick the highlight color with a radio button and bind your color choice
 
 Update <code>app.component.html</code> as follows:
 
-<code-example path="attribute-directives/src/app/app.component.html" linenums="false" header="src/app/app.component.html (v2)" region="v2"></code-example>
+<code-example path="attribute-directives/src/app/app.component.html" linenums="false" title="src/app/app.component.html (v2)" region="v2"></code-example>
 
 Revise the `AppComponent.color` so that it has no initial value.
 
-<code-example path="attribute-directives/src/app/app.component.ts" linenums="false" header="src/app/app.component.ts (class)" region="class"></code-example>
+<code-example path="attribute-directives/src/app/app.component.ts" linenums="false" title="src/app/app.component.ts (class)" region="class"></code-example>
 
 Here are the harness and directive in action.
 
@@ -283,12 +283,12 @@ Let the template developer set the default color.
 
 Add a second **input** property to `HighlightDirective` called `defaultColor`:
 
-<code-example path="attribute-directives/src/app/highlight.directive.ts" linenums="false" header="src/app/highlight.directive.ts (defaultColor)" region="defaultColor"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.ts" linenums="false" title="src/app/highlight.directive.ts (defaultColor)" region="defaultColor"></code-example>
 
 Revise the directive's `onMouseEnter` so that it first tries to highlight with the `highlightColor`,
 then with the `defaultColor`, and falls back to "red" if both properties are undefined.
 
-<code-example path="attribute-directives/src/app/highlight.directive.ts" linenums="false" header="src/app/highlight.directive.ts (mouse-enter)" region="mouse-enter"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.ts" linenums="false" title="src/app/highlight.directive.ts (mouse-enter)" region="mouse-enter"></code-example>
 
 How do you bind to a second property when you're already binding to the `appHighlight` attribute name?
 
@@ -296,7 +296,7 @@ As with components, you can add as many directive property bindings as you need
 The developer should be able to write the following template HTML to both bind to the `AppComponent.color`
 and fall back to "violet" as the default color.
 
-<code-example path="attribute-directives/src/app/app.component.html" linenums="false" header="src/app/app.component.html (defaultColor)" region="defaultColor"></code-example>
+<code-example path="attribute-directives/src/app/app.component.html" linenums="false" title="src/app/app.component.html (defaultColor)" region="defaultColor"></code-example>
 
 Angular knows that the `defaultColor` binding belongs to the `HighlightDirective`
 because you made it _public_ with the `@Input` decorator.
@@ -319,12 +319,12 @@ This page covered how to:
 The final source code follows:
 
 <code-tabs>
-  <code-pane header="app/app.component.ts" path="attribute-directives/src/app/app.component.ts"></code-pane>
-  <code-pane header="app/app.component.html" path="attribute-directives/src/app/app.component.html"></code-pane>
-  <code-pane header="app/highlight.directive.ts" path="attribute-directives/src/app/highlight.directive.ts"></code-pane>
-  <code-pane header="app/app.module.ts" path="attribute-directives/src/app/app.module.ts"></code-pane>
-  <code-pane header="main.ts" path="attribute-directives/src/main.ts"></code-pane>
-  <code-pane header="index.html" path="attribute-directives/src/index.html"></code-pane>
+  <code-pane title="app/app.component.ts" path="attribute-directives/src/app/app.component.ts"></code-pane>
+  <code-pane title="app/app.component.html" path="attribute-directives/src/app/app.component.html"></code-pane>
+  <code-pane title="app/highlight.directive.ts" path="attribute-directives/src/app/highlight.directive.ts"></code-pane>
+  <code-pane title="app/app.module.ts" path="attribute-directives/src/app/app.module.ts"></code-pane>
+  <code-pane title="main.ts" path="attribute-directives/src/main.ts"></code-pane>
+  <code-pane title="index.html" path="attribute-directives/src/index.html"></code-pane>
 </code-tabs>
 
 
@@ -338,11 +338,11 @@ You can also experience and download the <live-example title="Attribute Directiv
 In this demo, the `highlightColor` property is an ***input*** property of
 the `HighlightDirective`. You've seen it applied without an alias:
 
-<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" header="src/app/highlight.directive.ts (color)" region="color"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.2.ts" linenums="false" title="src/app/highlight.directive.ts (color)" region="color"></code-example>
 
 You've seen it with an alias:
 
-<code-example path="attribute-directives/src/app/highlight.directive.ts" linenums="false" header="src/app/highlight.directive.ts (color)" region="color"></code-example>
+<code-example path="attribute-directives/src/app/highlight.directive.ts" linenums="false" title="src/app/highlight.directive.ts (color)" region="color"></code-example>
 
 Either way, the `@Input` decorator tells Angular that this property is
 _public_ and available for binding by a parent component.
@@ -374,7 +374,7 @@ You can tell if `@Input` is needed by the position of the property name in a bin
 
 Now apply that reasoning to the following example:
 
-<code-example path="attribute-directives/src/app/app.component.html" linenums="false" header="src/app/app.component.html (color)" region="color"></code-example>
+<code-example path="attribute-directives/src/app/app.component.html" linenums="false" title="src/app/app.component.html (color)" region="color"></code-example>
 
 * The `color` property in the expression on the right belongs to the template's component.
   The template and its component trust each other.

aio/content/guide/bootstrapping.md

@@ -12,7 +12,7 @@ Every application has at least one Angular module, the _root_ module
 that you bootstrap to launch the application.
 By convention, it is usually called `AppModule`.
 
-If you use the [Angular CLI](cli) to generate an app, the default `AppModule` is as follows:
+If you use the CLI to generate an app, the default `AppModule` is as follows:
 
 ```typescript
 /* JavaScript imports */
@@ -52,7 +52,7 @@ The `@NgModule` decorator identifies `AppModule` as an `NgModule` class.
 * **_bootstrap_**—the _root_ component that Angular creates and inserts
 into the `index.html` host web page.
 
-The default application created by the Angular CLI only has one component, `AppComponent`, so it
+The default CLI application only has one component, `AppComponent`, so it
 is in both the `declarations` and the `bootstrap` arrays.
 
 {@a declarations}
@@ -106,18 +106,18 @@ To use a directive, component, or pipe in a module, you must do a few things:
 Those three steps look like the following. In the file where you create your directive, export it.
 The following example, named `ItemDirective` is the default directive structure that the CLI generates in its own file, `item.directive.ts`:
 
-<code-example path="bootstrapping/src/app/item.directive.ts" region="directive" header="src/app/item.directive.ts" linenums="false">
+<code-example path="bootstrapping/src/app/item.directive.ts" region="directive" title="src/app/item.directive.ts" linenums="false">
 </code-example>
 
 The key point here is that you have to export it so you can import it elsewhere. Next, import it
 into the NgModule, in this example `app.module.ts`, with a JavaScript import statement:
 
-<code-example path="bootstrapping/src/app/app.module.ts" region="directive-import" header="src/app/app.module.ts" linenums="false">
+<code-example path="bootstrapping/src/app/app.module.ts" region="directive-import" title="src/app/app.module.ts" linenums="false">
 </code-example>
 
 And in the same file, add it to the `@NgModule` `declarations` array:
 
-<code-example path="bootstrapping/src/app/app.module.ts" region="declarations" header="src/app/app.module.ts" linenums="false">
+<code-example path="bootstrapping/src/app/app.module.ts" region="declarations" title="src/app/app.module.ts" linenums="false">
 </code-example>
 
 

aio/content/guide/browser-support.md

@@ -122,7 +122,7 @@ Note that polyfills cannot magically transform an old, slow browser into a moder
 
 ## Enabling polyfills
 
-[Angular CLI](cli) users enable polyfills through the `src/polyfills.ts` file that
+[Angular CLI](https://github.com/angular/angular-cli/wiki) users enable polyfills through the `src/polyfills.ts` file that
 the CLI created with your project.
 
 This file incorporates the mandatory and many of the optional polyfills as JavaScript `import` statements.
@@ -140,7 +140,7 @@ For example, [if you need the web animations polyfill](http://caniuse.com/#feat=
 
 Then open the `polyfills.ts` file and un-comment the corresponding `import` statement as in the following example:
 
-<code-example header="src/polyfills.ts">
+<code-example title="src/polyfills.ts">
   /**
   * Required to support Web Animations `@angular/platform-browser/animations`.
   * Needed for: All but Chrome, Firefox and Opera. http://caniuse.com/#feat=web-animation
@@ -553,7 +553,7 @@ computed with the <a href="http://closure-compiler.appspot.com/home">closure com
 
 If you are not using the CLI, you should add your polyfill scripts directly to the host web page (`index.html`), perhaps like this.
 
-<code-example header="src/index.html">
+<code-example title="src/index.html">
   &lt;!-- pre-zone polyfills -->
   &lt;script src="node_modules/core-js/client/shim.min.js">&lt;/script>
   &lt;script src="node_modules/web-animations-js/web-animations.min.js">&lt;/script>

aio/content/guide/build.md

@@ -1,496 +0,0 @@
-# Building and serving Angular apps
-
-This page discusses build-specific configuration options for Angular projects.
-
-{@a app-environments}
-
-## Configuring application environments
-
-You can define different named build configurations for your project, such as *stage* and *production*, with different defaults. 
-
-Each named build configuration can have defaults for any of the options that apply to the various build targets, such as `build`, `serve`, and `test`. The [Angular CLI](cli) `build`, `serve`, and `test` commands can then replace files with appropriate versions for your intended target environment.
-
-The following figure shows how a project has multiple build targets, which can be executed using the named configurations that you define.
-
-<figure>
-  <img src="generated/images/guide/build/build-config-targets.gif" alt="build configurations and targets">
-</figure>
-
-### Configure environment-specific defaults
-
-A project's `src/environments/` folder contains the base configuration file, `environment.ts`, which provides a default environment. 
-You can add override defaults for additional environments, such as production and staging, in target-specific configuration files. 
-
-For example:
-
-```
-└──myProject/src/environments/
-                   └──environment.ts
-                   └──environment.prod.ts
-                   └──environment.stage.ts
-```
-
-The base file `environment.ts`, contains the default environment settings. For example:
-
-```
-export const environment = {
-  production: false
-};
-```
-
-The `build` command uses this as the build target when no environment is specified. 
-You can add further variables, either as additional properties on the environment object, or as separate objects. 
-For example, the following adds a default for a variable to the default environment:
-
-```
-export const environment = {
-  production: false,
-  apiUrl: 'http://my-api-url'
-};
-```
-
-You can add target-specific configuration files, such as `environment.prod.ts`. 
-The following sets content sets default values for the production build target:
-
-```
-export const environment = {
-  production: true
-  apiUrl: 'http://my-prod-url'
-};
-```
-
-### Using environment-specific variables in your app
-
-The following application structure configures build targets for production and staging environments:
-
-```
-└── src
-    └── app
-        ├── app.component.html
-        └── app.component.ts
-    └── environments
-        ├── environment.prod.ts
-        ├── environment.staging.ts
-        └── environment.ts
-```
-
-To use the environment configurations you have defined, your components must import the original environments file:
-
-```
-import { environment } from './../environments/environment';
-```
-
-This ensures that the build and serve commands can find the configurations for specific build targets.
-
-The following code in the component file (`app.component.ts`) uses an environment variable defined in the configuration files.
-
-```
-import { Component } from '@angular/core';
-import { environment } from './../environments/environment';
-
-@Component({
-  selector: 'app-root',
-  templateUrl: './app.component.html',
-  styleUrls: ['./app.component.css']
-})
-export class AppComponent {
-  constructor() {
-    console.log(environment.production); // Logs false for default environment
-  }
-  title = 'app works!';
-}
-```
-{@a file-replacement}
-
-## Configure target-specific file replacements
-
-The main CLI configuration file, `angular.json`, contains a `fileReplacements` section in the configuration for each build target, which allows you to replace any file with a target-specific version of that file. 
-This is useful for including target-specific code or variables in a build that targets a specific environment, such as production or staging.
-
-By default no files are replaced. 
-You can add file replacements for specific build targets. 
-For example:
-
-```
-"configurations": {
-  "production": {
-    "fileReplacements": [
-      {
-        "replace": "src/environments/environment.ts",
-        "with": "src/environments/environment.prod.ts"
-      }
-    ],
-    ...
-```
-
-This means that when you build your production configuration (using `ng build --prod` or `ng build --configuration=production`), the `src/environments/environment.ts` file is replaced with the target-specific version of the file, `src/environments/environment.prod.ts`.
-
-You can add additional configurations as required. To add a staging environment, create a copy of `src/environments/environment.ts` called `src/environments/environment.staging.ts`, then add a `staging` configuration to `angular.json`:
-
-```
-"configurations": {
-  "production": { ... },
-  "staging": {
-    "fileReplacements": [
-      {
-        "replace": "src/environments/environment.ts",
-        "with": "src/environments/environment.staging.ts"
-      }
-    ]
-  }
-}
-```
-
-You can add more configuration options to this target environment as well. 
-Any option that your build supports can be overridden in a build target configuration.
-
-To build using the staging configuration, run the following command:
-
-<code-example language="sh" class="code-shell">
- ng build --configuration=staging
-</code-example>
-
-You can also configure the `serve` command to use the targeted build configuration if you add it to the "serve:configurations" section of `angular.json`:
-
-```
-"serve": {
-  "builder": "@angular-devkit/build-angular:dev-server",
-  "options": {
-    "browserTarget": "your-project-name:build"
-  },
-  "configurations": {
-    "production": {
-      "browserTarget": "your-project-name:build:production"
-    },
-    "staging": {
-      "browserTarget": "your-project-name:build:staging"
-    }
-  }
-},
-```
-
-{@a size-budgets}
-
-## Configure size budgets
-
-As applications grow in functionality, they also grow in size. 
-The CLI allows you to set size thresholds in your configuration to ensure that parts of your application stay within size boundaries that you define.
-
-Define your size boundaries in the CLI configuration file, `angular.json`, in a `budgets` section for each [configured environment](#app-environments). 
-
-```
-{
-  ...
-  "configurations": {
-    "production": {
-      ...
-      budgets: []
-    }
-  }
-}
-```
-
-You can specify size budgets for the entire app, and for particular parts. 
-Each budget entry configures a budget of a given type. 
-Specify size values in the following formats:
-
-* 123 or 123b: Size in bytes
-
-* 123kb: Size in kilobytes
-
-* 123mb: Size in megabytes
-
-* 12%: Percentage of size relative to baseline. (Not valid for baseline values.)
-
-When you configure a budget, the build system warns or reports and error when a given part of the app reaches or exceeds a boundary size that you set.
-
-Each budget entry is a JSON object with the following properties:
-
-<table>
-  <tr>
-    <th>Property</th>
-    <th>Value</th>
-  </tr>
-
-  <tr>
-    <td>type</td>
-    <td>The type of budget. One of:
-
-        * bundle - The size of a specific bundle.
-        * initial - The initial size of the app.
-        * allScript - The size of all scripts.
-        * all - The size of the entire app.
-        * anyScript - The size of any one script.
-        * any - The size of any file.
-        
-    </td>
-  </tr>
-   <tr>
-    <td>name</td>
-    <td>
-    
-    The name of the bundle (for `type=bundle`).
-    
-    </td>
-  </tr>
-  <tr>
-    <td>baseline</td>
-    <td>An absolute baseline size for percentage values. </td>
-  </tr>
-  <tr>
-    <td>maximumWarning</td>
-    <td>Warns when a size exceeds this threshold percentage of the baseline.</td>
-  </tr>
-  <tr>
-    <td>maximumError</td>
-    <td>Reports an error when the size exceeds this threshold percentage of the baseline.</td>
-  </tr>
-  <tr>
-    <td>minimumWarning</td>
-    <td>Warns when the size reaches this threshold percentage of the baseline.</td>
-  </tr>
-  <tr>
-    <td>minimumError</td>
-    <td>Reports an error when the size reaches this threshold percentage of the baseline.</td>
-  </tr>
-  <tr>
-    <td>warning</td>
-    <td>Warns when the size ??reaches or exceeds?? this threshold percentage of the baseline.</td>
-  </tr>
-  <tr>
-    <td>error</td>
-    <td>Reports an error when the size ??reaches or exceeds?? this threshold percentage of the baseline.</td>
-  </tr>
-
- </table>
-
-
-{@a browser-compat}
-
-## Configuring browser compatibility
-
-The CLI uses [Autoprefixer](https://github.com/postcss/autoprefixer) to ensure compatibility with different browser and browser versions. 
-You may find it necessary to target specific browsers or exclude certain browser versions from your build.
-
-Internally, Autoprefixer relies on a library called [Browserslist](https://github.com/browserslist/browserslist) to figure out which browsers to support with prefixing. 
-Browserlist looks for configuration options in a `browserlist` property of the package configuration file, or in a configuration file named `.browserslistrc`. 
-Autoprefixer looks for the Browserlist configuration when it prefixes your CSS. 
-
-* You can tell Autoprefixer what browsers to target by adding a browserslist property to the package configuration file, `package.json`:
-```
- "browserslist": [
-   "> 1%",
-   "last 2 versions"
- ]
-```
-
-* Alternatively, you can add a new file, `.browserslistrc`, to the project directory, that specifies browsers you want to support:
-```
- ### Supported Browsers
- > 1%
- last 2 versions
-```
-
-See the [browserslist repo](https://github.com/browserslist/browserslist) for more examples of how to target specific browsers and versions.
-
-<div class="alert is-helpful">
-Backward compatibility
-
-If you want to produce a progressive web app and are using [Lighthouse](https://developers.google.com/web/tools/lighthouse/) to grade the project, add the following browserslist entry to your `package.json` file, in order to eliminate the [old flexbox](https://developers.google.com/web/tools/lighthouse/audits/old-flexbox) prefixes:
-
-```
-"browserslist": [
-  "last 2 versions",
-  "not ie <= 10",
-  "not ie_mob <= 10"
-]
-```
-
-</div>
-
-{@a proxy}
-
-## Proxying to a backend server
-
-You can use the [proxying support](https://webpack.js.org/configuration/dev-server/#devserver-proxy) in the `webpack` dev server to divert certain URLs to a backend server, by passing a file to the `--proxy-config` build option.
-For example, to divert all calls for `http://localhost:4200/api` to a server running on `http://localhost:3000/api`, take the following steps.
-
-1. Create a file `proxy.conf.json` in the projects `src/` folder, next to `package.json`.
-
-1. Add the following content to the new proxy file:
-    ```
-    {
-      "/api": {
-        "target": "http://localhost:3000",
-        "secure": false
-      }
-    }
-    ```
-
-1. In the CLI configuration file, `angular.json`, add the `proxyConfig` option to the `serve` target:
-    ```
-    ...
-    "architect": {
-      "serve": {
-        "builder": "@angular-devkit/build-angular:dev-server",
-        "options": {
-          "browserTarget": "your-application-name:build",
-          "proxyConfig": "src/proxy.conf.json"
-        },
-    ...
-    ```
-
-1. To run the dev server with this proxy configuration, call `ng serve`. 
-
-You can edit the proxy configuration file to add configuration options; some examples are given below. 
-For a description of all options, see [webpack DevServer documentation](https://webpack.js.org/configuration/dev-server/#devserver-proxy).
-
-Note that if you edit the proxy configuration file, you must relaunch the `ng serve` process to make your changes effective.
-
-### Rewrite the URL path
-
-The `pathRewrite` proxy configuration option lets you rewrite the URL path at run time. 
-For example, you can specify the following `pathRewrite` value to the proxy configuration to remove "api" from the end of a path.
-
-```
-{
-  "/api": {
-    "target": "http://localhost:3000",
-    "secure": false,
-    "pathRewrite": {
-      "^/api": ""
-    }
-  }
-}
-```
-
-If you need to access a backend that is not on `localhost`, set the `changeOrigin` option as well. For example:
-
-```
-{
-  "/api": {
-    "target": "http://npmjs.org",
-    "secure": false,
-    "pathRewrite": {
-      "^/api": ""
-    },
-    "changeOrigin": true
-  }
-}
-```
-
-To help determine whether your proxy is working as intended, set the `logLevel` option. For example:
-
-```
-{
-  "/api": {
-    "target": "http://localhost:3000",
-    "secure": false,
-    "pathRewrite": {
-      "^/api": ""
-    },
-    "logLevel": "debug"
-  }
-}
-```
-
-Proxy log levels are `info` (the default), `debug`, `warn`, `error`, and `silent`.
-
-### Proxy multiple entries
-
-You can  proxy multiple entries to the same target by defining the configuration in JavaScript.
-
-Set the proxy configuration file to `proxy.conf.js` (instead of `proxy.conf.json`), and specify configuration files as in the following example.
-
-```
-const PROXY_CONFIG = [
-    {
-        context: [
-            "/my",
-            "/many",
-            "/endpoints",
-            "/i",
-            "/need",
-            "/to",
-            "/proxy"
-        ],
-        target: "http://localhost:3000",
-        secure: false
-    }
-]
-
-module.exports = PROXY_CONFIG;
-```
-
-In the CLI configuration file, `angular.json`, point to the JavaScript proxy configuration file:
-
-```
-...
-"architect": {
-  "serve": {
-    "builder": "@angular-devkit/build-angular:dev-server",
-    "options": {
-      "browserTarget": "your-application-name:build",
-      "proxyConfig": "src/proxy.conf.js"
-    },
-...
-```
-
-### Bypass the proxy
-
-If you need to optionally bypass the proxy, or dynamically change the request before it's sent, add the bypass option, as shown in this JavaScript example.
-
-```
-const PROXY_CONFIG = {
-    "/api/proxy": {
-        "target": "http://localhost:3000",
-        "secure": false,
-        "bypass": function (req, res, proxyOptions) {
-            if (req.headers.accept.indexOf("html") !== -1) {
-                console.log("Skipping proxy for browser request.");
-                return "/index.html";
-            }
-            req.headers["X-Custom-Header"] = "yes";
-        }
-    }
-}
-
-module.exports = PROXY_CONFIG;
-```
-
-### Using corporate proxy
-
-If you work behind a corporate proxy, the cannot directly proxy calls to any URL outside your local network. 
-In this case, you can configure the backend proxy to redirect calls through your corporate proxy using an agent:
-
-<code-example language="none" class="code-shell">
-npm install --save-dev https-proxy-agent
-</code-example>
-
-When you define an environment variable `http_proxy` or `HTTP_PROXY`, an agent is automatically added to pass calls through your corporate proxy when running `npm start`.
-
-Use the following content in the JavaScript configuration file.
-
-```
-var HttpsProxyAgent = require('https-proxy-agent');
-var proxyConfig = [{
-  context: '/api',
-  target: 'http://your-remote-server.com:3000',
-  secure: false
-}];
-
-function setupForCorporateProxy(proxyConfig) {
-  var proxyServer = process.env.http_proxy || process.env.HTTP_PROXY;
-  if (proxyServer) {
-    var agent = new HttpsProxyAgent(proxyServer);
-    console.log('Using corporate proxy server: ' + proxyServer);
-    proxyConfig.forEach(function(entry) {
-      entry.agent = agent;
-    });
-  }
-  return proxyConfig;
-}
-
-module.exports = setupForCorporateProxy(proxyConfig);
-```
-

aio/content/guide/complex-animation-sequences.md

@@ -38,7 +38,7 @@ The following example demonstrates how to use `query()` and `stagger()` function
 
 * Animate each element on screen for 0.5 seconds using a custom-defined easing curve, simultaneously fading it in and un-transforming it.
 
-<code-example path="animations/src/app/hero-list-page.component.ts" header="src/app/hero-list-page.component.ts" region="page-animations" language="typescript" linenums="false"></code-example>
+<code-example path="animations/src/app/hero-list-page.component.ts" title="src/app/hero-list-page.component.ts" region="page-animations" language="typescript" linenums="false"></code-example>
 
 ## Parallel animation using group() function
 
@@ -51,7 +51,7 @@ You've seen how to add a delay between each successive animation. But you may al
 
 In the following example, using groups on both `:enter` and `:leave` allow for two different timing configurations. They're applied to the same element in parallel, but run independently.
 
-<code-example path="animations/src/app/hero-list-groups.component.ts" region="animationdef" header="src/app/hero-list-groups.component.ts (excerpt)" language="typescript" linenums="false"></code-example>
+<code-example path="animations/src/app/hero-list-groups.component.ts" region="animationdef" title="src/app/hero-list-groups.component.ts (excerpt)" language="typescript" linenums="false"></code-example>
 
 ## Sequential vs. parallel animations
 
@@ -70,11 +70,11 @@ The filter works in real time as you type. Elements leave the page as you type e
 
 The HTML template contains a trigger called `filterAnimation`.
 
-<code-example path="animations/src/app/hero-list-page.component.html" header="src/app/hero-list-page.component.html" region="filter-animations"></code-example>
+<code-example path="animations/src/app/hero-list-page.component.html" title="src/app/hero-list-page.component.html" region="filter-animations"></code-example>
 
 The component file contains three transitions.
 
-<code-example path="animations/src/app/hero-list-page.component.ts" header="src/app/hero-list-page.component.ts" region="filter-animations" language="typescript" linenums="false"></code-example>
+<code-example path="animations/src/app/hero-list-page.component.ts" title="src/app/hero-list-page.component.ts" region="filter-animations" language="typescript" linenums="false"></code-example>
 
 The animation does the following:
 

aio/content/guide/component-interaction.md

@@ -28,7 +28,7 @@ in which two or more components share information.
 typically adorned with [@Input decorations](guide/template-syntax#inputs-outputs).
 
 
-<code-example path="component-interaction/src/app/hero-child.component.ts" header="component-interaction/src/app/hero-child.component.ts">
+<code-example path="component-interaction/src/app/hero-child.component.ts" title="component-interaction/src/app/hero-child.component.ts">
 
 </code-example>
 
@@ -41,7 +41,7 @@ binding its `master` string property to the child's `master` alias,
 and each iteration's `hero` instance to the child's `hero` property.
 
 
-<code-example path="component-interaction/src/app/hero-parent.component.ts" header="component-interaction/src/app/hero-parent.component.ts">
+<code-example path="component-interaction/src/app/hero-parent.component.ts" title="component-interaction/src/app/hero-parent.component.ts">
 
 </code-example>
 
@@ -61,7 +61,7 @@ The running application displays three heroes:
 E2E test that all children were instantiated and displayed as expected:
 
 
-<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="parent-to-child" header="component-interaction/e2e/src/app.e2e-spec.ts">
+<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="parent-to-child" title="component-interaction/e2e/src/app.e2e-spec.ts">
 
 </code-example>
 
@@ -79,7 +79,7 @@ The setter of the `name` input property in the child `NameChildComponent`
 trims the whitespace from a name and replaces an empty value with default text.
 
 
-<code-example path="component-interaction/src/app/name-child.component.ts" header="component-interaction/src/app/name-child.component.ts">
+<code-example path="component-interaction/src/app/name-child.component.ts" title="component-interaction/src/app/name-child.component.ts">
 
 </code-example>
 
@@ -88,7 +88,7 @@ trims the whitespace from a name and replaces an empty value with default text.
 Here's the `NameParentComponent` demonstrating name variations including a name with all spaces:
 
 
-<code-example path="component-interaction/src/app/name-parent.component.ts" header="component-interaction/src/app/name-parent.component.ts">
+<code-example path="component-interaction/src/app/name-parent.component.ts" title="component-interaction/src/app/name-parent.component.ts">
 
 </code-example>
 
@@ -105,7 +105,7 @@ Here's the `NameParentComponent` demonstrating name variations including a name
 E2E tests of input property setter with empty and non-empty names:
 
 
-<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="parent-to-child-setter" header="component-interaction/e2e/src/app.e2e-spec.ts">
+<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="parent-to-child-setter" title="component-interaction/e2e/src/app.e2e-spec.ts">
 
 </code-example>
 
@@ -134,7 +134,7 @@ Learn about `ngOnChanges()` in the [LifeCycle Hooks](guide/lifecycle-hooks) chap
 This `VersionChildComponent` detects changes to the `major` and `minor` input properties and composes a log message reporting these changes:
 
 
-<code-example path="component-interaction/src/app/version-child.component.ts" header="component-interaction/src/app/version-child.component.ts">
+<code-example path="component-interaction/src/app/version-child.component.ts" title="component-interaction/src/app/version-child.component.ts">
 
 </code-example>
 
@@ -143,7 +143,7 @@ This `VersionChildComponent` detects changes to the `major` and `minor` input pr
 The `VersionParentComponent` supplies the `minor` and `major` values and binds buttons to methods that change them.
 
 
-<code-example path="component-interaction/src/app/version-parent.component.ts" header="component-interaction/src/app/version-parent.component.ts">
+<code-example path="component-interaction/src/app/version-parent.component.ts" title="component-interaction/src/app/version-parent.component.ts">
 
 </code-example>
 
@@ -164,7 +164,7 @@ Test that ***both*** input properties are set initially and that button clicks t
 the expected `ngOnChanges` calls and values:
 
 
-<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="parent-to-child-onchanges" header="component-interaction/e2e/src/app.e2e-spec.ts">
+<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="parent-to-child-onchanges" title="component-interaction/e2e/src/app.e2e-spec.ts">
 
 </code-example>
 
@@ -184,7 +184,7 @@ The child's `EventEmitter` property is an ***output property***,
   as seen in this `VoterComponent`:
 
 
-<code-example path="component-interaction/src/app/voter.component.ts" header="component-interaction/src/app/voter.component.ts">
+<code-example path="component-interaction/src/app/voter.component.ts" title="component-interaction/src/app/voter.component.ts">
 
 </code-example>
 
@@ -196,7 +196,7 @@ The parent `VoteTakerComponent` binds an event handler called `onVoted()` that r
 payload `$event` and updates a counter.
 
 
-<code-example path="component-interaction/src/app/votetaker.component.ts" header="component-interaction/src/app/votetaker.component.ts">
+<code-example path="component-interaction/src/app/votetaker.component.ts" title="component-interaction/src/app/votetaker.component.ts">
 
 </code-example>
 
@@ -217,7 +217,7 @@ and the method processes it:
 Test that clicking the *Agree* and *Disagree* buttons update the appropriate counters:
 
 
-<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="child-to-parent" header="component-interaction/e2e/src/app.e2e-spec.ts">
+<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="child-to-parent" title="component-interaction/e2e/src/app.e2e-spec.ts">
 
 </code-example>
 
@@ -240,7 +240,7 @@ The following is a child `CountdownTimerComponent` that repeatedly counts down t
 It has `start` and `stop` methods that control the clock and it displays a
 countdown status message in its own template.
 
-<code-example path="component-interaction/src/app/countdown-timer.component.ts" header="component-interaction/src/app/countdown-timer.component.ts">
+<code-example path="component-interaction/src/app/countdown-timer.component.ts" title="component-interaction/src/app/countdown-timer.component.ts">
 
 </code-example>
 
@@ -249,7 +249,7 @@ countdown status message in its own template.
 The `CountdownLocalVarParentComponent` that hosts the timer component is as follows:
 
 
-<code-example path="component-interaction/src/app/countdown-parent.component.ts" region="lv" header="component-interaction/src/app/countdown-parent.component.ts">
+<code-example path="component-interaction/src/app/countdown-parent.component.ts" region="lv" title="component-interaction/src/app/countdown-parent.component.ts">
 
 </code-example>
 
@@ -284,7 +284,7 @@ match the seconds displayed in the child's status message.
 Test also that clicking the *Stop* button pauses the countdown timer:
 
 
-<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="countdown-timer-tests" header="component-interaction/e2e/src/app.e2e-spec.ts">
+<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="countdown-timer-tests" title="component-interaction/e2e/src/app.e2e-spec.ts">
 
 </code-example>
 
@@ -324,7 +324,7 @@ is solely for the purpose of demonstration.
 
 Here is the parent, `CountdownViewChildParentComponent`:
 
-<code-example path="component-interaction/src/app/countdown-parent.component.ts" region="vc" header="component-interaction/src/app/countdown-parent.component.ts">
+<code-example path="component-interaction/src/app/countdown-parent.component.ts" region="vc" title="component-interaction/src/app/countdown-parent.component.ts">
 
 </code-example>
 
@@ -374,7 +374,7 @@ Components outside this component subtree have no access to the service or their
 This `MissionService` connects the `MissionControlComponent` to multiple `AstronautComponent` children.
 
 
-<code-example path="component-interaction/src/app/mission.service.ts" header="component-interaction/src/app/mission.service.ts">
+<code-example path="component-interaction/src/app/mission.service.ts" title="component-interaction/src/app/mission.service.ts">
 
 </code-example>
 
@@ -384,7 +384,7 @@ The `MissionControlComponent` both provides the instance of the service that it
 (through the `providers` metadata array) and injects that instance into itself through its constructor:
 
 
-<code-example path="component-interaction/src/app/missioncontrol.component.ts" header="component-interaction/src/app/missioncontrol.component.ts">
+<code-example path="component-interaction/src/app/missioncontrol.component.ts" title="component-interaction/src/app/missioncontrol.component.ts">
 
 </code-example>
 
@@ -394,7 +394,7 @@ The `AstronautComponent` also injects the service in its constructor.
 Each `AstronautComponent` is a child of the `MissionControlComponent` and therefore receives its parent's service instance:
 
 
-<code-example path="component-interaction/src/app/astronaut.component.ts" header="component-interaction/src/app/astronaut.component.ts">
+<code-example path="component-interaction/src/app/astronaut.component.ts" title="component-interaction/src/app/astronaut.component.ts">
 
 </code-example>
 
@@ -433,7 +433,7 @@ Tests click buttons of both the parent `MissionControlComponent` and the `Astron
 and verify that the history meets expectations:
 
 
-<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="bidirectional-service" header="component-interaction/e2e/src/app.e2e-spec.ts">
+<code-example path="component-interaction/e2e/src/app.e2e-spec.ts" region="bidirectional-service" title="component-interaction/e2e/src/app.e2e-spec.ts">
 
 </code-example>
 

aio/content/guide/component-styles.md

@@ -21,7 +21,7 @@ One way to do this is to set the `styles` property in the component metadata.
 The `styles` property takes an array of strings that contain CSS code.
 Usually you give it one string, as in the following example:
 
-<code-example path="component-styles/src/app/hero-app.component.ts" header="src/app/hero-app.component.ts" linenums="false">
+<code-example path="component-styles/src/app/hero-app.component.ts" title="src/app/hero-app.component.ts" linenums="false">
 </code-example>
 
 ## Style scope
@@ -71,7 +71,7 @@ Use the `:host` pseudo-class selector to target styles in the element that *host
 targeting elements *inside* the component's template).
 
 
-<code-example path="component-styles/src/app/hero-details.component.css" region="host" header="src/app/hero-details.component.css" linenums="false">
+<code-example path="component-styles/src/app/hero-details.component.css" region="host" title="src/app/hero-details.component.css" linenums="false">
 </code-example>
 
 The `:host` selector is the only way to target the host element. You can't reach
@@ -83,7 +83,7 @@ including another selector inside parentheses after `:host`.
 
 The next example targets the host element again, but only when it also has the `active` CSS class.
 
-<code-example path="component-styles/src/app/hero-details.component.css" region="hostfunction" header="src/app/hero-details.component.css" linenums="false">
+<code-example path="component-styles/src/app/hero-details.component.css" region="hostfunction" title="src/app/hero-details.component.css" linenums="false">
 </code-example>
 
 ### :host-context
@@ -99,7 +99,7 @@ up to the document root. The `:host-context()` selector is useful when combined
 The following example applies a `background-color` style to all `<h2>` elements *inside* the component, only
 if some ancestor element has the CSS class `theme-light`.
 
-<code-example path="component-styles/src/app/hero-details.component.css" region="hostcontext" header="src/app/hero-details.component.css" linenums="false">
+<code-example path="component-styles/src/app/hero-details.component.css" region="hostcontext" title="src/app/hero-details.component.css" linenums="false">
 </code-example>
 
 ### (deprecated) `/deep/`, `>>>`, and `::ng-deep`
@@ -114,7 +114,7 @@ children and content children of the component.
 The following example targets all `<h3>` elements, from the host element down
 through this component to all of its child elements in the DOM.
 
-<code-example path="component-styles/src/app/hero-details.component.css" region="deep" header="src/app/hero-details.component.css" linenums="false">
+<code-example path="component-styles/src/app/hero-details.component.css" region="deep" title="src/app/hero-details.component.css" linenums="false">
 
 </code-example>
 
@@ -154,7 +154,7 @@ You can add a `styles` array property to the `@Component` decorator.
 
 Each string in the array defines some CSS for this component.
 
-<code-example path="component-styles/src/app/hero-app.component.ts" header="src/app/hero-app.component.ts (CSS inline)">
+<code-example path="component-styles/src/app/hero-app.component.ts" title="src/app/hero-app.component.ts (CSS inline)">
 </code-example>
 
 <div class="alert is-critical">
@@ -164,7 +164,7 @@ They are _not inherited_ by any components nested within the template nor by any
 
 </div>
 
-The Angular CLI command [`ng generate component`](cli/generate) defines an empty `styles` array when you create the component with the `--inline-style` flag.
+The CLI defines an empty `styles` array when you create the component with the `--inline-style` flag.
 
 <code-example language="sh" class="code-shell">
 ng generate component hero-app --inline-style
@@ -176,8 +176,8 @@ You can load styles from external CSS files by adding a `styleUrls` property
 to a component's `@Component` decorator:
 
 <code-tabs>
-  <code-pane header="src/app/hero-app.component.ts (CSS in file)" path="component-styles/src/app/hero-app.component.1.ts"></code-pane>
-  <code-pane header="src/app/hero-app.component.css" path="component-styles/src/app/hero-app.component.css"></code-pane>
+  <code-pane title="src/app/hero-app.component.ts (CSS in file)" path="component-styles/src/app/hero-app.component.1.ts"></code-pane>
+  <code-pane title="src/app/hero-app.component.css" path="component-styles/src/app/hero-app.component.css"></code-pane>
 </code-tabs>
 
 <div class="alert is-critical">
@@ -193,7 +193,7 @@ They are _not inherited_ by any components nested within the template nor by any
 
 </div>
 
-When you use the Angular CLI command [`ng generate component`](cli/generate) without the `--inline-style` flag, it creates an empty styles file for you and references that file in the component's generated `styleUrls`.
+The CLI creates an empty styles file for you by default and references that file in the component's generated `styleUrls`.
 
 <code-example language="sh" class="code-shell">
 ng generate component hero-app
@@ -204,20 +204,19 @@ ng generate component hero-app
 You can embed CSS styles directly into the HTML template by putting them
 inside `<style>` tags.
 
-<code-example path="component-styles/src/app/hero-controls.component.ts" region="inlinestyles" header="src/app/hero-controls.component.ts">
+<code-example path="component-styles/src/app/hero-controls.component.ts" region="inlinestyles" title="src/app/hero-controls.component.ts">
 </code-example>
 
 ### Template link tags
 
 You can also write `<link>` tags into the component's HTML template.
 
-<code-example path="component-styles/src/app/hero-team.component.ts" region="stylelink" header="src/app/hero-team.component.ts">
+<code-example path="component-styles/src/app/hero-team.component.ts" region="stylelink" title="src/app/hero-team.component.ts">
 </code-example>
 
 <div class="alert is-critical">
 
-When building with the CLI, be sure to include the linked style file among the assets to be copied to the server as described in the [CLI wiki](https://github.com/angular/angular-cli/wiki/stories-asset-configuration).
-<!-- 2018-10-16: The link above is still the best source for this information. -->
+When building with the CLI, be sure to include the linked style file among the assets to be copied to the server as described in the [CLI documentation](https://github.com/angular/angular-cli/wiki/stories-asset-configuration).
 
 Once included, the CLI will include the stylesheet, whether the link tag's href URL is relative to the application root or the component file.
 
@@ -231,7 +230,7 @@ on the [MDN](https://developer.mozilla.org) site.
 
 In this case, the URL is relative to the CSS file into which you're importing.
 
-<code-example path="component-styles/src/app/hero-details.component.css" region="import" header="src/app/hero-details.component.css (excerpt)">
+<code-example path="component-styles/src/app/hero-details.component.css" region="import" title="src/app/hero-details.component.css (excerpt)">
 </code-example>
 
 ### External and global style files
@@ -240,9 +239,7 @@ When building with the CLI, you must configure the `angular.json` to include _al
 
 Register **global** style files in the `styles` section which, by default, is pre-configured with the global `styles.css` file.
 
-See the [CLI wiki](https://github.com/angular/angular-cli/wiki/stories-global-styles) to learn more.
-<!-- 2018-10-16: The link above is still the best source for this information. -->
-
+See the [CLI documentation](https://github.com/angular/angular-cli/wiki/stories-global-styles) to learn more.
 
 ### Non-CSS style files
 
@@ -262,10 +259,8 @@ The CLI build process runs the pertinent CSS preprocessor.
 
 When generating a component file with `ng generate component`, the CLI emits an empty CSS styles file (`.css`) by default.
 You can configure the CLI to default to your preferred CSS preprocessor
-as explained in the [CLI wiki](https://github.com/angular/angular-cli/wiki/stories-css-preprocessors
+as explained in the [CLI documentation](https://github.com/angular/angular-cli/wiki/stories-css-preprocessors
 "CSS Preprocessor integration").
-<!-- 2018-10-16: The link above is still the best source for this information. -->
-
 
 <div class="alert is-important">
 
@@ -303,7 +298,7 @@ Choose from the following modes:
 
 To set the components encapsulation mode, use the `encapsulation` property in the component metadata:
 
-<code-example path="component-styles/src/app/quest-summary.component.ts" region="encapsulation.native" header="src/app/quest-summary.component.ts" linenums="false">
+<code-example path="component-styles/src/app/quest-summary.component.ts" region="encapsulation.native" title="src/app/quest-summary.component.ts" linenums="false">
 </code-example>
 
 `ShadowDom` view encapsulation only works on browsers that have native support

aio/content/guide/dependency-injection-in-action.md

@@ -21,7 +21,7 @@ constructor, and lets the framework provide them.
 
 The following example shows that `AppComponent` declares its dependence on `LoggerService` and `UserContext`.
 
-<code-example path="dependency-injection-in-action/src/app/app.component.ts" region="ctor" header="src/app/app.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/app.component.ts" region="ctor" title="src/app/app.component.ts" linenums="false">
 
 </code-example>
 
@@ -30,7 +30,7 @@ The following example shows that `AppComponent` declares its dependence on `Logg
 `UserService`, another service that gathers information about a particular user.
 
 
-<code-example path="dependency-injection-in-action/src/app/user-context.service.ts" region="injectables" header="user-context.service.ts (injection)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/user-context.service.ts" region="injectables" title="user-context.service.ts (injection)" linenums="false">
 
 </code-example>
 
@@ -68,7 +68,7 @@ by providing that service *at the sub-root component for that branch*.
 This example shows how to make a different instance of `HeroService` available to `HeroesBaseComponent`
 by adding it to the `providers` array of the `@Component()` decorator of the sub-component.
 
-<code-example path="dependency-injection-in-action/src/app/sorted-heroes.component.ts" region="injection" header="src/app/sorted-heroes.component.ts (HeroesBaseComponent excerpt)">
+<code-example path="dependency-injection-in-action/src/app/sorted-heroes.component.ts" region="injection" title="src/app/sorted-heroes.component.ts (HeroesBaseComponent excerpt)">
 
 </code-example>
 
@@ -103,7 +103,7 @@ This is called *sandboxing* because each service and component instance has its
 
 In this example, `HeroBiosComponent` presents three instances of `HeroBioComponent`.
 
-<code-example path="dependency-injection-in-action/src/app/hero-bios.component.ts" region="simple" header="ap/hero-bios.component.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-bios.component.ts" region="simple" title="ap/hero-bios.component.ts">
 
 </code-example>
 
@@ -111,7 +111,7 @@ In this example, `HeroBiosComponent` presents three instances of `HeroBioCompone
 Each `HeroBioComponent` can edit a single hero's biography.
 `HeroBioComponent` relies on `HeroCacheService` to fetch, cache, and perform other persistence operations on that hero.
 
-<code-example path="dependency-injection-in-action/src/app/hero-cache.service.ts" region="service" header="src/app/hero-cache.service.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-cache.service.ts" region="service" title="src/app/hero-cache.service.ts">
 
 </code-example>
 
@@ -122,7 +122,7 @@ as they'd be competing with each other to determine which hero to cache.
 Instead, each `HeroBioComponent` gets its *own* `HeroCacheService` instance
 by listing `HeroCacheService` in its metadata `providers` array.
 
-<code-example path="dependency-injection-in-action/src/app/hero-bio.component.ts" region="component" header="src/app/hero-bio.component.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-bio.component.ts" region="component" title="src/app/hero-bio.component.ts">
 
 </code-example>
 
@@ -179,13 +179,13 @@ that parent component becomes the host. The following example covers this second
 These decorators can be used individually or together, as shown in the example.
 This `HeroBiosAndContactsComponent` is a revision of `HeroBiosComponent` which you looked at [above](guide/dependency-injection-in-action#hero-bios-component).
 
-<code-example path="dependency-injection-in-action/src/app/hero-bios.component.ts" region="hero-bios-and-contacts" header="src/app/hero-bios.component.ts (HeroBiosAndContactsComponent)">
+<code-example path="dependency-injection-in-action/src/app/hero-bios.component.ts" region="hero-bios-and-contacts" title="src/app/hero-bios.component.ts (HeroBiosAndContactsComponent)">
 
 </code-example>
 
 Focus on the template:
 
-<code-example path="dependency-injection-in-action/src/app/hero-bios.component.ts" region="template" header="dependency-injection-in-action/src/app/hero-bios.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-bios.component.ts" region="template" title="dependency-injection-in-action/src/app/hero-bios.component.ts" linenums="false">
 
 </code-example>
 
@@ -193,7 +193,7 @@ Now there's a new `<hero-contact>` element between the `<hero-bio>` tags.
 Angular *projects*, or *transcludes*, the corresponding `HeroContactComponent` into the `HeroBioComponent` view,
 placing it in the `<ng-content>` slot of the `HeroBioComponent` template.
 
-<code-example path="dependency-injection-in-action/src/app/hero-bio.component.ts" region="template" header="src/app/hero-bio.component.ts (template)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-bio.component.ts" region="template" title="src/app/hero-bio.component.ts (template)" linenums="false">
 
 </code-example>
 
@@ -206,13 +206,13 @@ The result is shown below, with the hero's telephone number from `HeroContactCom
 
 Here's `HeroContactComponent`, which demonstrates the qualifying decorators.
 
-<code-example path="dependency-injection-in-action/src/app/hero-contact.component.ts" region="component" header="src/app/hero-contact.component.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-contact.component.ts" region="component" title="src/app/hero-contact.component.ts">
 
 </code-example>
 
 Focus on the constructor parameters.
 
-<code-example path="dependency-injection-in-action/src/app/hero-contact.component.ts" region="ctor-params" header="src/app/hero-contact.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-contact.component.ts" region="ctor-params" title="src/app/hero-contact.component.ts" linenums="false">
 
 </code-example>
 
@@ -256,7 +256,7 @@ the app throws an exception when it cannot find the required logger at the host
 
 Using a custom provider allows you to provide a concrete implementation for implicit dependencies, such as built-in browser APIs. The following example uses an `InjectionToken` to provide the [localStorage](https://developer.mozilla.org/en-US/docs/Web/API/Window/localStorage) browser API as a dependency in the `BrowserStorageService`. 
 
-<code-example path="dependency-injection-in-action/src/app/storage.service.ts" header="src/app/storage.service.ts">
+<code-example path="dependency-injection-in-action/src/app/storage.service.ts" title="src/app/storage.service.ts">
 
 </code-example>
 
@@ -266,7 +266,7 @@ The `factory` function returns the `localStorage` property that is attached to t
 
 Providers can also be scoped by injector through constructor parameter decorators. The following example overrides the `BROWSER_STORAGE` token in the `Component` class `providers` with the `sessionStorage` browser API. The same `BrowserStorageService` is injected twice in the constructor, decorated with `@Self` and `@SkipSelf` to define which injector handles the provider dependency.
 
-<code-example path="dependency-injection-in-action/src/app/storage.component.ts" header="src/app/storage.component.ts">
+<code-example path="dependency-injection-in-action/src/app/storage.component.ts" title="src/app/storage.component.ts">
 
 </code-example>
 
@@ -283,7 +283,7 @@ As a result, you might need to access a component's DOM element.
 To illustrate, here's a simplified version of `HighlightDirective` from
 the [Attribute Directives](guide/attribute-directives) page.
 
-<code-example path="dependency-injection-in-action/src/app/highlight.directive.ts" header="src/app/highlight.directive.ts">
+<code-example path="dependency-injection-in-action/src/app/highlight.directive.ts" title="src/app/highlight.directive.ts">
 
 </code-example>
 
@@ -297,7 +297,7 @@ whose `nativeElement` property exposes the DOM element for the directive to mani
 The sample code applies the directive's `myHighlight` attribute to two `<div>` tags,
 first without a value (yielding the default color) and then with an assigned color value.
 
-<code-example path="dependency-injection-in-action/src/app/app.component.html" region="highlight" header="src/app/app.component.html (highlight)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/app.component.html" region="highlight" title="src/app/app.component.html (highlight)" linenums="false">
 
 </code-example>
 
@@ -323,7 +323,7 @@ Angular passes this token to the injector and assigns the result to the paramete
 The following is a typical example.
 
 
-<code-example path="dependency-injection-in-action/src/app/hero-bios.component.ts" region="ctor" header="src/app/hero-bios.component.ts (component constructor injection)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-bios.component.ts" region="ctor" title="src/app/hero-bios.component.ts (component constructor injection)" linenums="false">
 
 </code-example>
 
@@ -366,7 +366,7 @@ It's visually simple: a few properties and the logs produced by a logger.
 The code behind it customizes how and where the DI framework provides dependencies.
 The use cases illustrate different ways to use the [*provide* object literal](guide/dependency-injection-providers#provide) to associate a definition object with a DI token. 
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="hero-of-the-month" header="hero-of-the-month.component.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="hero-of-the-month" title="hero-of-the-month.component.ts">
 
 </code-example>
 
@@ -384,7 +384,7 @@ You can also use a value provider in a unit test to provide mock data in place o
 
 The `HeroOfTheMonthComponent` example has two value providers.
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-value" header="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-value" title="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" linenums="false">
 
 </code-example>
 
@@ -405,7 +405,7 @@ The title string literal is immediately available.
 The `someHero` variable in this example was set earlier in the file as shown below.
 You can't use a variable whose value will be defined later.
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="some-hero" header="dependency-injection-in-action/src/app/hero-of-the-month.component.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="some-hero" title="dependency-injection-in-action/src/app/hero-of-the-month.component.ts">
 
 </code-example>
 
@@ -425,7 +425,7 @@ extend the default class, or emulate the behavior of the real class in a test ca
 
 The following code shows two examples in `HeroOfTheMonthComponent`.
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-class" header="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-class" title="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" linenums="false">
 
 </code-example>
 
@@ -446,7 +446,7 @@ Components outside the tree continue to receive the original `LoggerService` ins
 
 `DateLoggerService` inherits from `LoggerService`; it appends the current date/time to each message:
 
-<code-example path="dependency-injection-in-action/src/app/date-logger.service.ts" region="date-logger-service" header="src/app/date-logger.service.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/date-logger.service.ts" region="date-logger-service" title="src/app/date-logger.service.ts" linenums="false">
 
 </code-example>
 
@@ -458,7 +458,7 @@ The `useExisting` provider key lets you map one token to another.
 In effect, the first token is an *alias* for the service associated with the second token,
 creating two ways to access the same service object.
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-existing" header="dependency-injection-in-action/src/app/hero-of-the-month.component.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-existing" title="dependency-injection-in-action/src/app/hero-of-the-month.component.ts">
 
 </code-example>
 
@@ -470,13 +470,13 @@ You might want to shrink that API surface to just the members you actually need.
 In this example, the `MinimalLogger` [class-interface](#class-interface) reduces the API to two members:
 
 
-<code-example path="dependency-injection-in-action/src/app/minimal-logger.service.ts" header="src/app/minimal-logger.service.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/minimal-logger.service.ts" title="src/app/minimal-logger.service.ts" linenums="false">
 
 </code-example>
 
 The following example puts `MinimalLogger` to use in a simplified version of `HeroOfTheMonthComponent`.
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.1.ts" header="src/app/hero-of-the-month.component.ts (minimal version)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.1.ts" title="src/app/hero-of-the-month.component.ts (minimal version)" linenums="false">
 
 </code-example>
 
@@ -507,7 +507,7 @@ This is illustrated in the following image, which displays the logging date.
 The `useFactory` provider key lets you create a dependency object by calling a factory function,
 as in the following example.
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-factory" header="dependency-injection-in-action/src/app/hero-of-the-month.component.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-factory" title="dependency-injection-in-action/src/app/hero-of-the-month.component.ts">
 
 </code-example>
 
@@ -530,7 +530,7 @@ The `runnersUpFactory()` returns the *provider factory function*, which can use
 the passed-in state value and the injected services `Hero` and `HeroService`.
 
 
-<code-example path="dependency-injection-in-action/src/app/runners-up.ts" region="factory-synopsis" header="runners-up.ts (excerpt)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/runners-up.ts" region="factory-synopsis" title="runners-up.ts (excerpt)" linenums="false">
 
 </code-example>
 
@@ -570,13 +570,13 @@ That's the subject of the next section.
 The previous *Hero of the Month* example used the `MinimalLogger` class
 as the token for a provider of `LoggerService`.
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-existing" header="dependency-injection-in-action/src/app/hero-of-the-month.component.ts">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="use-existing" title="dependency-injection-in-action/src/app/hero-of-the-month.component.ts">
 
 </code-example>
 
 `MinimalLogger` is an abstract class.
 
-<code-example path="dependency-injection-in-action/src/app/minimal-logger.service.ts" header="dependency-injection-in-action/src/app/minimal-logger.service.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/minimal-logger.service.ts" title="dependency-injection-in-action/src/app/minimal-logger.service.ts" linenums="false">
 
 </code-example>
 
@@ -604,7 +604,7 @@ Using a class as an interface gives you the characteristics of an interface in a
 To minimize memory cost, however, the class should have *no implementation*.
 The `MinimalLogger` transpiles to this unoptimized, pre-minified JavaScript for a constructor function.
 
-<code-example path="dependency-injection-in-action/src/app/minimal-logger.service.ts" region="minimal-logger-transpiled" header="dependency-injection-in-action/src/app/minimal-logger.service.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/minimal-logger.service.ts" region="minimal-logger-transpiled" title="dependency-injection-in-action/src/app/minimal-logger.service.ts" linenums="false">
 
 </code-example>
 
@@ -633,13 +633,13 @@ another token that happens to have the same name.
 You encountered them twice in the *Hero of the Month* example,
 in the *title* value provider and in the *runnersUp* factory provider.
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="provide-injection-token" header="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="provide-injection-token" title="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" linenums="false">
 
 </code-example>
 
 You created the `TITLE` token like this:
 
-<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="injection-token" header="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" region="injection-token" title="dependency-injection-in-action/src/app/hero-of-the-month.component.ts" linenums="false">
 
 </code-example>
 
@@ -667,7 +667,7 @@ The `HeroesBaseComponent` can stand on its own.
 It demands its own instance of `HeroService` to get heroes
 and displays them in the order they arrive from the database.
 
-<code-example path="dependency-injection-in-action/src/app/sorted-heroes.component.ts" region="heroes-base" header="src/app/sorted-heroes.component.ts (HeroesBaseComponent)">
+<code-example path="dependency-injection-in-action/src/app/sorted-heroes.component.ts" region="heroes-base" title="src/app/sorted-heroes.component.ts (HeroesBaseComponent)">
 
 </code-example>
 
@@ -693,7 +693,7 @@ You must provide the `HeroService` again for *this* component,
 then pass it down to the base class inside the constructor.
 
 
-<code-example path="dependency-injection-in-action/src/app/sorted-heroes.component.ts" region="sorted-heroes" header="src/app/sorted-heroes.component.ts (SortedHeroesComponent)">
+<code-example path="dependency-injection-in-action/src/app/sorted-heroes.component.ts" region="sorted-heroes" title="src/app/sorted-heroes.component.ts (SortedHeroesComponent)">
 
 </code-example>
 
@@ -731,7 +731,7 @@ appear *above* the class definition.
 
 Break the circularity with `forwardRef`.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-providers" header="parent-finder.component.ts (AlexComponent providers)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-providers" title="parent-finder.component.ts (AlexComponent providers)" linenums="false">
 
 </code-example>
 

aio/content/guide/dependency-injection-navtree.md

@@ -40,7 +40,7 @@ In the following example, the parent `AlexComponent` has several children includ
 {@a alex}
 
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-1" header="parent-finder.component.ts (AlexComponent v.1)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-1" title="parent-finder.component.ts (AlexComponent v.1)" linenums="false">
 
 </code-example>
 
@@ -49,7 +49,7 @@ In the following example, the parent `AlexComponent` has several children includ
 *Cathy* reports whether or not she has access to *Alex*
 after injecting an `AlexComponent` into her constructor:
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="cathy" header="parent-finder.component.ts (CathyComponent)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="cathy" title="parent-finder.component.ts (CathyComponent)" linenums="false">
 
 </code-example>
 
@@ -98,7 +98,7 @@ inject its parent via the parent's base class*.
 The sample's `CraigComponent` explores this question. [Looking back](#alex),
 you see that the `Alex` component *extends* (*inherits*) from a class named `Base`.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-class-signature" header="parent-finder.component.ts (Alex class signature)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-class-signature" title="parent-finder.component.ts (Alex class signature)" linenums="false">
 
 </code-example>
 
@@ -106,7 +106,7 @@ you see that the `Alex` component *extends* (*inherits*) from a class named `Bas
 
 The `CraigComponent` tries to inject `Base` into its `alex` constructor parameter and reports if it succeeded.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="craig" header="parent-finder.component.ts (CraigComponent)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="craig" title="parent-finder.component.ts (CraigComponent)" linenums="false">
 
 </code-example>
 
@@ -138,7 +138,7 @@ and add that provider to the `providers` array of the `@Component()` metadata fo
 {@a alex-providers}
 
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-providers" header="parent-finder.component.ts (AlexComponent providers)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-providers" title="parent-finder.component.ts (AlexComponent providers)" linenums="false">
 
 </code-example>
 
@@ -149,7 +149,7 @@ The [*forwardRef*](guide/dependency-injection-in-action#forwardref) breaks the c
 *Carol*, the third of *Alex*'s child components, injects the parent into its `parent` parameter,
 the same way you've done it before.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="carol-class" header="parent-finder.component.ts (CarolComponent class)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="carol-class" title="parent-finder.component.ts (CarolComponent class)" linenums="false">
 
 </code-example>
 
@@ -177,7 +177,7 @@ That means he must both *inject* the `Parent` class interface to get *Alice* and
 
 Here's *Barry*.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="barry" header="parent-finder.component.ts (BarryComponent)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="barry" title="parent-finder.component.ts (BarryComponent)" linenums="false">
 
 </code-example>
 
@@ -190,11 +190,11 @@ For now, focus on *Barry*'s constructor.
 
 <code-tabs>
 
-  <code-pane header="Barry's constructor" path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="barry-ctor">
+  <code-pane title="Barry's constructor" path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="barry-ctor">
 
   </code-pane>
 
-  <code-pane header="Carol's constructor" path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="carol-ctor">
+  <code-pane title="Carol's constructor" path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="carol-ctor">
 
   </code-pane>
 
@@ -229,7 +229,7 @@ You [learned earlier](guide/dependency-injection-in-action#class-interface) that
 
 The example defines a `Parent` class interface.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="parent" header="parent-finder.component.ts (Parent class-interface)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="parent" title="parent-finder.component.ts (Parent class-interface)" linenums="false">
 
 </code-example>
 
@@ -241,7 +241,7 @@ Such a narrow interface helps decouple the child component class from its parent
 
 A component that could serve as a parent *should* implement the class interface as the `AliceComponent` does.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alice-class-signature" header="parent-finder.component.ts (AliceComponent class signature)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alice-class-signature" title="parent-finder.component.ts (AliceComponent class signature)" linenums="false">
 
 </code-example>
 
@@ -251,7 +251,7 @@ Doing so adds clarity to the code.  But it's not technically necessary.
 Although `AlexComponent` has a `name` property, as required by its `Base` class,
 its class signature doesn't mention `Parent`.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-class-signature" header="parent-finder.component.ts (AlexComponent class signature)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-class-signature" title="parent-finder.component.ts (AlexComponent class signature)" linenums="false">
 
 </code-example>
 
@@ -277,19 +277,19 @@ It doesn't in this example *only* to demonstrate that the code will compile and
 Writing variations of the same parent *alias provider* gets old quickly,
 especially this awful mouthful with a [*forwardRef*](guide/dependency-injection-in-action#forwardref).
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-providers" header="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alex-providers" title="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
 
 </code-example>
 
 You can extract that logic into a helper function like the following.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="provide-the-parent" header="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="provide-the-parent" title="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
 
 </code-example>
 
 Now you can add a simpler, more meaningful parent provider to your components.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alice-providers" header="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="alice-providers" title="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
 
 </code-example>
 
@@ -299,14 +299,14 @@ The application might have a variety of parent types, each with its own class in
 
 Here's a revised version that defaults to `parent` but also accepts an optional second parameter for a different parent class interface.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="provide-parent" header="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="provide-parent" title="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
 
 </code-example>
 
 
 And here's how you could use it with a different parent type.
 
-<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="beth-providers" header="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/parent-finder.component.ts" region="beth-providers" title="dependency-injection-in-action/src/app/parent-finder.component.ts" linenums="false">
 
 </code-example>
 

aio/content/guide/dependency-injection-providers.md

@@ -130,7 +130,7 @@ like the title of the application or the address of a web API endpoint.
 These configuration objects aren't always instances of a class.
 They can be object literals, as shown in the following example.
 
-<code-example path="dependency-injection/src/app/app.config.ts" region="config" header="src/app/app.config.ts (excerpt)" linenums="false">
+<code-example path="dependency-injection/src/app/app.config.ts" region="config" title="src/app/app.config.ts (excerpt)" linenums="false">
 </code-example>
 
 {@a interface-not-valid-token}
@@ -147,7 +147,7 @@ In TypeScript, an interface is a design-time artifact, and doesn't have a runtim
 <code-example path="dependency-injection/src/app/providers.component.ts" region="provider-9-ctor-interface"  linenums="false">
 </code-example>
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 
 This might seem strange if you're used to dependency injection in strongly typed languages where an interface is the preferred dependency lookup key.
 However, JavaScript, doesn't have interfaces, so when TypeScript is transpiled to JavaScript, the interface disappears.
@@ -157,13 +157,13 @@ There is no interface type information left for Angular to find at runtime.
 
 One alternative is to provide and inject the configuration object in an NgModule like `AppModule`.
 
-<code-example path="dependency-injection/src/app/app.module.ts" region="providers" header="src/app/app.module.ts (providers)"></code-example>
+<code-example path="dependency-injection/src/app/app.module.ts" region="providers" title="src/app/app.module.ts (providers)"></code-example>
 
 Another solution to choosing a provider token for non-class dependencies is
 to define and use an `InjectionToken` object.
 The following example shows how to define such a token.
 
-<code-example path="dependency-injection/src/app/app.config.ts" region="token" header="src/app/app.config.ts" linenums="false">
+<code-example path="dependency-injection/src/app/app.config.ts" region="token" title="src/app/app.config.ts" linenums="false">
 </code-example>
 
 The type parameter, while optional, conveys the dependency's type to developers and tooling.
@@ -177,10 +177,10 @@ Register the dependency provider using the `InjectionToken` object:
 Now you can inject the configuration object into any constructor that needs it, with
 the help of an `@Inject()` parameter decorator.
 
-<code-example path="dependency-injection/src/app/app.component.2.ts" region="ctor" header="src/app/app.component.ts" linenums="false">
+<code-example path="dependency-injection/src/app/app.component.2.ts" region="ctor" title="src/app/app.component.ts" linenums="false">
 </code-example>
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 
 Although the `AppConfig` interface plays no role in dependency injection,
 it supports typing of the configuration object within the class.
@@ -215,21 +215,21 @@ who is authorized and who isn't.
 
 To resolve this, we give the `HeroService` constructor a boolean flag to control display of secret heroes.
 
-<code-example path="dependency-injection/src/app/heroes/hero.service.ts" region="internals" header="src/app/heroes/hero.service.ts (excerpt)" linenums="false">
+<code-example path="dependency-injection/src/app/heroes/hero.service.ts" region="internals" title="src/app/heroes/hero.service.ts (excerpt)" linenums="false">
 </code-example>
 
 You can inject `Logger`, but you can't inject the  `isAuthorized` flag. Instead, you can use a factory provider to create a new logger instance for `HeroService`.
 
 A factory provider needs a factory function.
 
-<code-example path="dependency-injection/src/app/heroes/hero.service.provider.ts" region="factory" header="src/app/heroes/hero.service.provider.ts (excerpt)" linenums="false">
+<code-example path="dependency-injection/src/app/heroes/hero.service.provider.ts" region="factory" title="src/app/heroes/hero.service.provider.ts (excerpt)" linenums="false">
 </code-example>
 
 Although `HeroService` has no access to `UserService`, the factory function does.
 You inject both `Logger` and `UserService` into the factory provider
 and let the injector pass them along to the factory function.
 
-<code-example path="dependency-injection/src/app/heroes/hero.service.provider.ts" region="provider" header="src/app/heroes/hero.service.provider.ts (excerpt)" linenums="false">
+<code-example path="dependency-injection/src/app/heroes/hero.service.provider.ts" region="provider" title="src/app/heroes/hero.service.provider.ts (excerpt)" linenums="false">
 </code-example>
 
 * The `useFactory` field tells Angular that the provider is a factory function whose implementation is `heroServiceFactory`.
@@ -248,10 +248,10 @@ The following shows the new and the old implementations side-by-side.
 
 <code-tabs>
 
-  <code-pane header="src/app/heroes/heroes.component (v3)" path="dependency-injection/src/app/heroes/heroes.component.ts">
+  <code-pane title="src/app/heroes/heroes.component (v3)" path="dependency-injection/src/app/heroes/heroes.component.ts">
   </code-pane>
 
-  <code-pane header="src/app/heroes/heroes.component (v2)" path="dependency-injection/src/app/heroes/heroes.component.1.ts">
+  <code-pane title="src/app/heroes/heroes.component (v2)" path="dependency-injection/src/app/heroes/heroes.component.1.ts">
   </code-pane>
 
 </code-tabs>
@@ -293,7 +293,7 @@ When you provide multiple sets of routes using [RouterModule.forRoot](api/router
 and [RouterModule.forChild](api/router/RouterModule#forchild) in a single module,
 the [ROUTES](api/router/ROUTES) token combines all the different provided sets of routes into a single value.
 
-<div class="alert is-helpful>
+<div class="alert-is-helpful>
 
 Search for [Constants in API documentation](api?type=const) to find more built-in tokens. 
 
@@ -309,7 +309,7 @@ When providers are tree-shakable, the Angular compiler removes the associated
 services from the final output when it determines that they are not used in your application.
 This significantly reduces the size of your bundles.
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 
 Ideally, if an application isn't injecting a service, it shouldn't be included in the final output. 
 However, Angular has to be able to identify at build time whether the service will be required or not. 
@@ -322,13 +322,13 @@ Thus, services provided at the NgModule or component level are not tree-shakable
 
 The following example of non-tree-shakable providers in Angular configures a service provider for the injector of an NgModule.
 
-<code-example path="dependency-injection/src/app/tree-shaking/service-and-module.ts"  header="src/app/tree-shaking/service-and-modules.ts" linenums="false"> </code-example>
+<code-example path="dependency-injection/src/app/tree-shaking/service-and-module.ts"  title="src/app/tree-shaking/service-and-modules.ts" linenums="false"> </code-example>
 
 This module can then be imported into your application module 
 to make the service available for injection in your app, 
 as shown in the following example.
 
-<code-example path="dependency-injection/src/app/tree-shaking/app.module.ts"  header="src/app/tree-shaking/app.modules.ts" linenums="false"> </code-example>
+<code-example path="dependency-injection/src/app/tree-shaking/app.module.ts"  title="src/app/tree-shaking/app.modules.ts" linenums="false"> </code-example>
 
 When `ngc` runs, it compiles `AppModule` into a module factory, which contains definitions for all the providers declared in all the modules it includes. At runtime, this factory becomes an injector that instantiates these services.
 
@@ -340,13 +340,13 @@ You can make a provider tree-shakable by specifying it in the `@Injectable()` de
 
 The following example shows the tree-shakable equivalent to the `ServiceModule` example above.
 
-<code-example path="dependency-injection/src/app/tree-shaking/service.ts"  header="src/app/tree-shaking/service.ts" linenums="false"> </code-example>
+<code-example path="dependency-injection/src/app/tree-shaking/service.ts"  title="src/app/tree-shaking/service.ts" linenums="false"> </code-example>
 
 The service can be instantiated by configuring a factory function, as in the following example.
 
-<code-example path="dependency-injection/src/app/tree-shaking/service.0.ts"  header="src/app/tree-shaking/service.0.ts" linenums="false"> </code-example>
+<code-example path="dependency-injection/src/app/tree-shaking/service.0.ts"  title="src/app/tree-shaking/service.0.ts" linenums="false"> </code-example>
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 
 To override a tree-shakable provider, configure the injector of a specific NgModule or component with another provider, using the `providers: []` array syntax of the `@NgModule()` or `@Component()` decorator.
 

aio/content/guide/dependency-injection.md

@@ -9,7 +9,7 @@ DI is a coding pattern in which a class asks for dependencies from external sour
 
 In Angular, the DI framework provides declared dependencies to a class when that class is instantiated. This guide explains how DI works in Angular, and how you use it to make your apps flexible, efficient, and robust, as well as testable and maintainable.
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 
  You can run the <live-example></live-example> of the sample app that accompanies this guide.
 
@@ -19,16 +19,16 @@ Start by reviewing this simplified version of the _heroes_ feature
 from the [The Tour of Heroes](tutorial/). This simple version doesn't use DI; we'll walk through converting it to do so.
 
 <code-tabs>
-  <code-pane header="src/app/heroes/heroes.component.ts" path="dependency-injection/src/app/heroes/heroes.component.1.ts" region="v1">
+  <code-pane title="src/app/heroes/heroes.component.ts" path="dependency-injection/src/app/heroes/heroes.component.1.ts" region="v1">
   </code-pane>
 
-  <code-pane header="src/app/heroes/hero-list.component.ts" path="dependency-injection/src/app/heroes/hero-list.component.1.ts">
+  <code-pane title="src/app/heroes/hero-list.component.ts" path="dependency-injection/src/app/heroes/hero-list.component.1.ts">
   </code-pane>
 
-  <code-pane header="src/app/heroes/hero.ts" path="dependency-injection/src/app/heroes/hero.ts">
+  <code-pane title="src/app/heroes/hero.ts" path="dependency-injection/src/app/heroes/hero.ts">
   </code-pane>
 
-  <code-pane header="src/app/heroes/mock-heroes.ts" path="dependency-injection/src/app/heroes/mock-heroes.ts">
+  <code-pane title="src/app/heroes/mock-heroes.ts" path="dependency-injection/src/app/heroes/mock-heroes.ts">
   </code-pane>
 
 </code-tabs>
@@ -39,7 +39,7 @@ Its only purpose is to display `HeroListComponent`, which displays a list of her
 This version of the `HeroListComponent` gets heroes from the `HEROES` array, an in-memory collection
 defined in a separate `mock-heroes` file.
 
-<code-example header="src/app/heroes/hero-list.component.ts (class)" path="dependency-injection/src/app/heroes/hero-list.component.1.ts" region="class">
+<code-example title="src/app/heroes/hero-list.component.ts (class)" path="dependency-injection/src/app/heroes/hero-list.component.1.ts" region="class">
 </code-example>
 
 This approach works for prototyping, but is not robust or maintainable.
@@ -52,7 +52,7 @@ replace every use of the `HEROES` mock data.
 
 The DI framework lets you supply data to a component from an injectable _service_ class, defined in its own file. To demonstrate, we'll create an injectable service class that provides a list of heroes, and register that class as a provider of that service.
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 
 Having multiple classes in the same file can be confusing. We generally recommend that you define components and services in separate files.
 
@@ -68,7 +68,7 @@ See an example in the [DI Cookbook](guide/dependency-injection-in-action#forward
 
 ### Create an injectable service class
 
-The [Angular CLI](cli) can generate a new `HeroService` class in the `src/app/heroes` folder with this command.
+The [**Angular CLI**](https://cli.angular.io/) can generate a new `HeroService` class in the `src/app/heroes` folder with this command.
 
 <code-example language="sh" class="code-shell">
 ng generate service heroes/hero
@@ -76,12 +76,12 @@ ng generate service heroes/hero
 
 The command creates the following `HeroService` skeleton.
 
-<code-example path="dependency-injection/src/app/heroes/hero.service.0.ts" header="src/app/heroes/hero.service.ts (CLI-generated)">
+<code-example path="dependency-injection/src/app/heroes/hero.service.0.ts" title="src/app/heroes/hero.service.ts (CLI-generated)">
 </code-example>
 
 The `@Injectable()` is an essential ingredient in every Angular service definition. The rest of the class has been written to expose a `getHeroes` method that returns the same mock data as before. (A real app would probably get its data asynchronously from a remote server, but we'll ignore that to focus on the mechanics of injecting the service.)
 
-<code-example path="dependency-injection/src/app/heroes/hero.service.3.ts" header="src/app/heroes/hero.service.ts">
+<code-example path="dependency-injection/src/app/heroes/hero.service.3.ts" title="src/app/heroes/hero.service.ts">
 </code-example>
 
 
@@ -147,7 +147,7 @@ In order for `HeroListComponent` to get heroes from `HeroService`, it needs to a
 
 You can tell Angular to inject a dependency in a component's constructor by specifying a **constructor parameter with the dependency type**. Here's the `HeroListComponent` constructor, asking for the `HeroService` to be injected.
 
-<code-example header="src/app/heroes/hero-list.component (constructor signature)" path="dependency-injection/src/app/heroes/hero-list.component.ts"
+<code-example title="src/app/heroes/hero-list.component (constructor signature)" path="dependency-injection/src/app/heroes/hero-list.component.ts"
 region="ctor-signature">
 </code-example>
 
@@ -155,10 +155,10 @@ Of course, `HeroListComponent` should do something with the injected `HeroServic
 Here's the revised component, making use of the injected service, side-by-side with the previous version for comparison.
 
 <code-tabs>
-  <code-pane header="hero-list.component (with DI)" path="dependency-injection/src/app/heroes/hero-list.component.2.ts">
+  <code-pane title="hero-list.component (with DI)" path="dependency-injection/src/app/heroes/hero-list.component.2.ts">
   </code-pane>
 
-  <code-pane header="hero-list.component (without DI)" path="dependency-injection/src/app/heroes/hero-list.component.1.ts">
+  <code-pane title="hero-list.component (without DI)" path="dependency-injection/src/app/heroes/hero-list.component.1.ts">
   </code-pane>
 </code-tabs>
 
@@ -197,7 +197,7 @@ Listing dependencies as constructor parameters may be all you need to test appli
 For example, you can create a new `HeroListComponent` with a mock service that you can manipulate
 under test.
 
-<code-example path="dependency-injection/src/app/test.component.ts" region="spec" header="src/app/test.component.ts" linenums="false">
+<code-example path="dependency-injection/src/app/test.component.ts" region="spec" title="src/app/test.component.ts" linenums="false">
 </code-example>
 
 <div class="alert is-helpful">
@@ -217,13 +217,13 @@ Here is the revised `HeroService` that injects `Logger`, side by side with the p
 
 <code-tabs>
 
-  <code-pane header="src/app/heroes/hero.service (v2)" path="dependency-injection/src/app/heroes/hero.service.2.ts">
+  <code-pane title="src/app/heroes/hero.service (v2)" path="dependency-injection/src/app/heroes/hero.service.2.ts">
   </code-pane>
 
-  <code-pane header="src/app/heroes/hero.service (v1)" path="dependency-injection/src/app/heroes/hero.service.1.ts">
+  <code-pane title="src/app/heroes/hero.service (v1)" path="dependency-injection/src/app/heroes/hero.service.1.ts">
   </code-pane>
 
-  <code-pane header="src/app/logger.service"
+  <code-pane title="src/app/logger.service"
   path="dependency-injection/src/app/logger.service.ts">
   </code-pane>
 
@@ -238,7 +238,7 @@ If Angular can't find that parameter information, it throws an error.
 Angular can only find the parameter information _if the class has a decorator of some kind_.
 The `@Injectable()` decorator is the standard decorator for service classes.
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 
  The decorator requirement is imposed by TypeScript. TypeScript normally discards parameter type information when it [transpiles](guide/glossary#transpile) the code to JavaScript. TypeScript preserves this information if the class has a decorator and the `emitDecoratorMetadata` compiler option is set `true` in TypeScript's `tsconfig.json` configuration file. The CLI configures `tsconfig.json` with `emitDecoratorMetadata: true`.
  
@@ -260,14 +260,14 @@ In simple examples, the dependency value is an *instance*, and
 the class *type* serves as its own lookup key.
 Here you get a `HeroService` directly from the injector by supplying the `HeroService` type as the token:
 
-<code-example path="dependency-injection/src/app/injector.component.ts" region="get-hero-service" header="src/app/injector.component.ts" linenums="false">
+<code-example path="dependency-injection/src/app/injector.component.ts" region="get-hero-service" title="src/app/injector.component.ts" linenums="false">
 </code-example>
 
 The behavior is similar when you write a constructor that requires an injected class-based dependency.
 When you define a constructor parameter with the `HeroService` class type,
 Angular knows to inject the service associated with that `HeroService` class token:
 
-<code-example path="dependency-injection/src/app/heroes/hero-list.component.ts" region="ctor-signature" header="src/app/heroes/hero-list.component.ts">
+<code-example path="dependency-injection/src/app/heroes/hero-list.component.ts" region="ctor-signature" title="src/app/heroes/hero-list.component.ts">
 </code-example>
 
 Many dependency values are provided by classes, but not all. The expanded *provide* object lets you associate different kinds of providers with a DI token. 
@@ -295,7 +295,7 @@ When using `@Optional()`, your code must be prepared for a null value. If you
 don't register a logger provider anywhere, the injector sets the
 value of `logger` to null.
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 
 `@Inject()` and `@Optional()` are _parameter decorators_.  They alter the way the DI framework provides a dependency, by annotating the dependency parameter on the constructor of the class that requires the dependency.
 

aio/content/guide/deployment.md

@@ -1,192 +1,60 @@
 # Deployment
 
-When you are ready to deploy your Angular application to a remote server, you have various options for
-deployment.
+This page describes techniques for deploying your Angular application to a remote server.
 
 {@a dev-deploy}
 {@a copy-files}
 
 ## Simplest deployment possible
 
-For the simplest deployment, create a production build and copy the output directory to a web server.
+For the simplest deployment, build for development and copy the output directory to a web server.
 
-1. Start with the production build:
+1. Start with the development build
 
   <code-example language="none" class="code-shell">
-    ng build --prod
+    ng build
   </code-example>
 
 
 2. Copy _everything_ within the output folder (`dist/` by default) to a folder on the server.
 
-3. Configure the server to redirect requests for missing files to `index.html`.
-Learn more about server-side redirects [below](#fallback).
 
-This is the simplest production-ready deployment of your application.
+3. If you copy the files into a server _sub-folder_, append the build flag, `--base-href` and set the `<base href>` appropriately.<br><br>
 
-{@a deploy-to-github}
+  For example, if the `index.html` is on the server at `/my/app/index.html`, set the _base href_  to
+  `<base href="/my/app/">` like this.
 
-## Deploy to GitHub pages
-
-Another simple way to deploy your Angular app is to use [GitHub Pages](https://help.github.com/articles/what-is-github-pages/).
-
-1. You need to [create a GitHub account](https://github.com/join) if you don't have one, and then [create a repository](https://help.github.com/articles/create-a-repo/) for your project.
-Make a note of the user name and project name in GitHub.
-
-1. Build your project using Github project name, with the Angular CLI command [`ng build`](cli/build) and the options shown here:
-   <code-example language="none" class="code-shell">
-     ng build --prod --output-path docs --base-href <project_name>
-    </code-example>
-
-1. When the build is complete, make a copy of `docs/index.html` and name it `docs/404.html`.
-
-1. Commit your changes and push.
-
-1. On the GitHub project page, configure it to [publish from the docs folder](https://help.github.com/articles/configuring-a-publishing-source-for-github-pages/#publishing-your-github-pages-site-from-a-docs-folder-on-your-master-branch).
-
-You can see your deployed page at `https://<user_name>.github.io/<project_name>/`.
-
-<div class="alert is-helpful>
-
- Check out [angular-cli-ghpages](https://github.com/angular-buch/angular-cli-ghpages), a full featured package that does all this for you and has extra functionality.
-
-</div>
-
-<hr>
-
-{@a server-configuration}
-
-## Server configuration
-
-This section covers changes you may have make to the server or to files deployed to the server.
-
-{@a fallback}
-
-### Routed apps must fallback to `index.html`
-
-Angular apps are perfect candidates for serving with a simple static HTML server.
-You don't need a server-side engine to dynamically compose application pages because
-Angular does that on the client-side.
-
-If the app uses the Angular router, you must configure the server
-to return the application's host page (`index.html`) when asked for a file that it does not have.
-
-{@a deep-link}
-
-A routed application should support "deep links".
-A _deep link_ is a URL that specifies a path to a component inside the app.
-For example, `http://www.mysite.com/heroes/42` is a _deep link_ to the hero detail page
-that displays the hero with `id: 42`.
-
-There is no issue when the user navigates to that URL from within a running client.
-The Angular router interprets the URL and routes to that page and hero.
-
-But clicking a link in an email, entering it in the browser address bar,
-or merely refreshing the browser while on the hero detail page &mdash;
-all of these actions are handled by the browser itself, _outside_ the running application.
-The browser makes a direct request to the server for that URL, bypassing the router.
-
-A static server routinely returns `index.html` when it receives a request for `http://www.mysite.com/`.
-But it rejects `http://www.mysite.com/heroes/42` and returns a `404 - Not Found` error *unless* it is
-configured to return `index.html` instead.
-
-#### Fallback configuration examples
-
-There is no single configuration that works for every server.
-The following sections describe configurations for some of the most popular servers.
-The list is by no means exhaustive, but should provide you with a good starting point.
-
-* [Apache](https://httpd.apache.org/): add a
-[rewrite rule](http://httpd.apache.org/docs/current/mod/mod_rewrite.html) to the `.htaccess` file as shown
-  (https://ngmilk.rocks/2015/03/09/angularjs-html5-mode-or-pretty-urls-on-apache-using-htaccess/):
-
-  <code-example format=".">
-    RewriteEngine On
-    &#35 If an existing asset or directory is requested go to it as it is
-    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} -f [OR]
-    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} -d
-    RewriteRule ^ - [L]
-
-    &#35 If the requested resource doesn't exist, use index.html
-    RewriteRule ^ /index.html
+  <code-example language="none" class="code-shell">
+    ng build --base-href=/my/app/
   </code-example>
 
-
-* [Nginx](http://nginx.org/): use `try_files`, as described in
-[Front Controller Pattern Web Apps](https://www.nginx.com/resources/wiki/start/topics/tutorials/config_pitfalls/#front-controller-pattern-web-apps),
-modified to serve `index.html`:
-
-  <code-example format=".">
-    try_files $uri $uri/ /index.html;
-  </code-example>
+  You'll see that the `<base href>` is set properly in the generated `dist/index.html`.<br><br>
+  If you copy to the server's root directory, omit this step and leave the `<base href>` alone.<br><br>
+  Learn more about the role of `<base href>` [below](guide/deployment#base-tag).
 
 
-* [IIS](https://www.iis.net/): add a rewrite rule to `web.config`, similar to the one shown
-[here](http://stackoverflow.com/a/26152011/2116927):
-
-  <code-example format='.'>
-    &lt;system.webServer&gt;
-      &lt;rewrite&gt;
-        &lt;rules&gt;
-          &lt;rule name="Angular Routes" stopProcessing="true"&gt;
-            &lt;match url=".*" /&gt;
-            &lt;conditions logicalGrouping="MatchAll"&gt;
-              &lt;add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /&gt;
-              &lt;add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /&gt;
-            &lt;/conditions&gt;
-            &lt;action type="Rewrite" url="/index.html" /&gt;
-          &lt;/rule&gt;
-        &lt;/rules&gt;
-      &lt;/rewrite&gt;
-    &lt;/system.webServer&gt;
-
-  </code-example>
+4. Configure the server to redirect requests for missing files to `index.html`.
+Learn more about server-side redirects [below](guide/deployment#fallback).
 
 
-* [GitHub Pages](https://pages.github.com/): you can't
-[directly configure](https://github.com/isaacs/github/issues/408)
-the GitHub Pages server, but you can add a 404 page.
-Copy `index.html` into `404.html`.
-It will still be served as the 404 response, but the browser will process that page and load the app properly.
-It's also a good idea to
-[serve from `docs/` on master](https://help.github.com/articles/configuring-a-publishing-source-for-github-pages/#publishing-your-github-pages-site-from-a-docs-folder-on-your-master-branch)
-and to
-[create a `.nojekyll` file](https://www.bennadel.com/blog/3181-including-node-modules-and-vendors-folders-in-your-github-pages-site.htm)
-
-
-* [Firebase hosting](https://firebase.google.com/docs/hosting/): add a
-[rewrite rule](https://firebase.google.com/docs/hosting/url-redirects-rewrites#section-rewrites).
-
-  <code-example format=".">
-    "rewrites": [ {
-      "source": "**",
-      "destination": "/index.html"
-    } ]
-
-  </code-example>
-
-{@a cors}
-
-### Requesting services from a different server (CORS)
-
-Angular developers may encounter a
-<a href="https://en.wikipedia.org/wiki/Cross-origin_resource_sharing" title="Cross-origin resource sharing">
-<i>cross-origin resource sharing</i></a> error when making a service request (typically a data service request)
-to a server other than the application's own host server.
-Browsers forbid such requests unless the server permits them explicitly.
-
-There isn't anything the client application can do about these errors.
-The server must be configured to accept the application's requests.
-Read about how to enable CORS for specific servers at
-<a href="http://enable-cors.org/server.html" title="Enabling CORS server">enable-cors.org</a>.
-
-<hr>
+This is _not_ a production deployment. It's not optimized and it won't be fast for users.
+It might be good enough for sharing your progress and ideas internally with managers, teammates, and other stakeholders.
 
 {@a optimize}
 
-## Production optimizations
+## Optimize for production
 
-The `--prod` _meta-flag_ engages the following build optimization features.
+Although deploying directly from the development environment works, 
+you can generate an optimized build with additional CLI command line flags,
+starting with `--prod`.
+
+### Build with _--prod_
+
+<code-example language="none" class="code-shell">
+  ng build --prod
+</code-example>
+
+The `--prod` _meta-flag_ engages the following optimization features.
 
 * [Ahead-of-Time (AOT) Compilation](guide/aot-compiler): pre-compiles Angular component templates.
 * [Production mode](#enable-prod-mode): deploys the production environment which enables _production mode_.
@@ -195,22 +63,32 @@ The `--prod` _meta-flag_ engages the following build optimization features.
 * Uglification: rewrites code to use short, cryptic variable and function names.
 * Dead code elimination: removes unreferenced modules and much unused code.
 
-See [`ng build`](cli/build) for more about CLI build options and what they do.
+The remaining [copy deployment steps](#copy-files) are the same as before.
 
+You may further reduce bundle sizes by adding the `build-optimizer` flag.
+
+<code-example language="none" class="code-shell">
+  ng build --prod --build-optimizer
+</code-example>
+
+See the [CLI Documentation](https://github.com/angular/angular-cli/wiki/build) 
+for details about available build options and what they do.
 
 {@a enable-prod-mode}
 
-### Enable runtime production mode
+### Enable production mode
 
-In addition to build optimizations, Angular also has a runtime production mode. Angular apps run in development mode by default, as you can see by the following message on the browser console:
+Angular apps run in development mode by default, as you can see by the following message on the browser
+console:
 
 <code-example format="nocode">
   Angular is running in the development mode. Call enableProdMode() to enable the production mode.
 </code-example>
 
-Switching to _production mode_ makes it run faster by disabling development specific checks such as the dual change detection cycles.
+Switching to _production mode_ can make it run faster by disabling development specific checks such as the dual change detection cycles.
 
-When you enable production builds via `--prod` command line flag, the runtime production mode is enabled as well.
+Building for production (or appending the `--environment=prod` flag) enables _production mode_
+Look at the CLI-generated `main.ts` to see how this works.
 
 {@a lazy-loading}
 
@@ -224,24 +102,22 @@ Configure the Angular Router to defer loading of all other modules (and their as
 or by [_lazy loading_](guide/router#asynchronous-routing "Lazy loading")
 them on demand.
 
-<div class="alert is-helpful>
+#### Don't eagerly import something from a lazy loaded module
 
-#### Don't eagerly import something from a lazy-loaded module
-
-If you mean to lazy-load a module, be careful not import it
-in a file that's eagerly loaded when the app starts (such as the root `AppModule`).
+It's a common mistake.
+You've arranged to lazy load a module.
+But you unintentionally import it, with a JavaScript `import` statement,
+in a file that's eagerly loaded when the app starts, a file such as the root `AppModule`.
 If you do that, the module will be loaded immediately.
 
 The bundling configuration must take lazy loading into consideration.
-Because lazy-loaded modules aren't imported in JavaScript, bundlers exclude them by default.
-Bundlers don't know about the router configuration and can't create separate bundles for lazy-loaded modules.
-You would have to create these bundles manually.
+Because lazy loaded modules aren't imported in JavaScript (as just noted), bundlers exclude them by default.
+Bundlers don't know about the router configuration and won't create separate bundles for lazy loaded modules.
+You have to create these bundles manually.
 
 The CLI runs the
 [Angular Ahead-of-Time Webpack Plugin](https://github.com/angular/angular-cli/tree/master/packages/%40ngtools/webpack)
-which automatically recognizes lazy-loaded `NgModules` and creates separate bundles for them.
-
-</div>
+which automatically recognizes lazy loaded `NgModules` and creates separate bundles for them.
 
 {@a measure}
 
@@ -327,12 +203,17 @@ the subfolder is `my/app/` and you should add `<base href="/my/app/">` to the se
 When the `base` tag is mis-configured, the app fails to load and the browser console displays `404 - Not Found` errors
 for the missing files. Look at where it _tried_ to find those files and adjust the base tag appropriately.
 
-## Building and serving for deployment
+## _build_ vs. _serve_
 
-When you are designing and developing applications, you typically use `ng serve` to build your app for fast, local, iterative development.
-When you are ready to deploy, however, you must use the `ng build` command to build the app and deploy the build artifacts elsewhere.
+You'll probably prefer `ng build` for deployments.
 
-Both `ng build` and `ng serve` clear the output folder before they build the project, but only the `ng build` command writes the generated build artifacts to the output folder.
+The **ng build** command is intended for building the app and deploying the build artifacts elsewhere.
+The **ng serve** command is intended for fast, local, iterative development.
+
+Both `ng build` and `ng serve` **clear the output folder** before they build the project.
+The `ng build` command writes generated build artifacts to the output folder.
+The `ng serve` command does not.
+It serves build artifacts from memory instead for a faster development experience.
 
 <div class="alert is-helpful">
 
@@ -341,13 +222,160 @@ To output to a different folder, change the `outputPath` in `angular.json`.
 
 </div>
 
-The `ng serve` command builds, watches, and serves the application from local memory, using a local development server.
-When you have deployed your app to another server, however, you might still want to serve the app so that you can continue to see changes that you make in it.
-You can do this by adding the `--watch` option to the `ng build` command.
+The `ng serve` command builds, watches, and serves the application from a local CLI development server.
 
-```
-ng build --watch
-```
-Like the `ng serve` command, this regenerates output files when source files change.
+The `ng build` command generates output files just once and does not serve them.
+The `ng build --watch` command will regenerate output files when source files change.
+This `--watch` flag is useful if you're building during development and 
+are automatically re-deploying changes to another server.
 
-For complete details of the CLI commands, see the [CLI command reference](cli).
+
+See the [CLI `build` topic](https://github.com/angular/angular-cli/wiki/build) for more details and options.
+
+<hr>
+
+{@a server-configuration}
+
+## Server configuration
+
+This section covers changes you may have make to the server or to files deployed to the server.
+
+{@a fallback}
+
+### Routed apps must fallback to `index.html`
+
+Angular apps are perfect candidates for serving with a simple static HTML server.
+You don't need a server-side engine to dynamically compose application pages because
+Angular does that on the client-side.
+
+If the app uses the Angular router, you must configure the server
+to return the application's host page (`index.html`) when asked for a file that it does not have.
+
+{@a deep-link}
+
+
+A routed application should support "deep links".
+A _deep link_ is a URL that specifies a path to a component inside the app.
+For example, `http://www.mysite.com/heroes/42` is a _deep link_ to the hero detail page
+that displays the hero with `id: 42`.
+
+There is no issue when the user navigates to that URL from within a running client.
+The Angular router interprets the URL and routes to that page and hero.
+
+But clicking a link in an email, entering it in the browser address bar,
+or merely refreshing the browser while on the hero detail page &mdash;
+all of these actions are handled by the browser itself, _outside_ the running application.
+The browser makes a direct request to the server for that URL, bypassing the router.
+
+A static server routinely returns `index.html` when it receives a request for `http://www.mysite.com/`.
+But it rejects `http://www.mysite.com/heroes/42` and returns a `404 - Not Found` error *unless* it is
+configured to return `index.html` instead.
+
+#### Fallback configuration examples
+
+There is no single configuration that works for every server.
+The following sections describe configurations for some of the most popular servers.
+The list is by no means exhaustive, but should provide you with a good starting point.
+
+#### Development servers
+
+* [Lite-Server](https://github.com/johnpapa/lite-server): the default dev server installed with the
+[Quickstart repo](https://github.com/angular/quickstart) is pre-configured to fallback to `index.html`.
+
+
+* [Webpack-Dev-Server](https://github.com/webpack/webpack-dev-server):  setup the
+`historyApiFallback` entry in the dev server options as follows:
+
+  <code-example>
+    historyApiFallback: {
+      disableDotRule: true,
+      htmlAcceptHeaders: ['text/html', 'application/xhtml+xml']
+    }
+  </code-example>
+
+
+#### Production servers
+
+* [Apache](https://httpd.apache.org/): add a
+[rewrite rule](http://httpd.apache.org/docs/current/mod/mod_rewrite.html) to the `.htaccess` file as shown
+  (https://ngmilk.rocks/2015/03/09/angularjs-html5-mode-or-pretty-urls-on-apache-using-htaccess/):
+
+  <code-example format=".">
+    RewriteEngine On
+    &#35 If an existing asset or directory is requested go to it as it is
+    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} -f [OR]
+    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} -d
+    RewriteRule ^ - [L]
+
+    &#35 If the requested resource doesn't exist, use index.html
+    RewriteRule ^ /index.html
+  </code-example>
+
+
+* [NGinx](http://nginx.org/): use `try_files`, as described in
+[Front Controller Pattern Web Apps](https://www.nginx.com/resources/wiki/start/topics/tutorials/config_pitfalls/#front-controller-pattern-web-apps),
+modified to serve `index.html`:
+
+  <code-example format=".">
+    try_files $uri $uri/ /index.html;
+  </code-example>
+
+
+* [IIS](https://www.iis.net/): add a rewrite rule to `web.config`, similar to the one shown
+[here](http://stackoverflow.com/a/26152011/2116927):
+
+  <code-example format='.'>
+    &lt;system.webServer&gt;
+      &lt;rewrite&gt;
+        &lt;rules&gt;
+          &lt;rule name="Angular Routes" stopProcessing="true"&gt;
+            &lt;match url=".*" /&gt;
+            &lt;conditions logicalGrouping="MatchAll"&gt;
+              &lt;add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /&gt;
+              &lt;add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /&gt;
+            &lt;/conditions&gt;
+            &lt;action type="Rewrite" url="/index.html" /&gt;
+          &lt;/rule&gt;
+        &lt;/rules&gt;
+      &lt;/rewrite&gt;
+    &lt;/system.webServer&gt;
+
+  </code-example>
+
+
+* [GitHub Pages](https://pages.github.com/): you can't
+[directly configure](https://github.com/isaacs/github/issues/408)
+the GitHub Pages server, but you can add a 404 page.
+Copy `index.html` into `404.html`.
+It will still be served as the 404 response, but the browser will process that page and load the app properly.
+It's also a good idea to
+[serve from `docs/` on master](https://help.github.com/articles/configuring-a-publishing-source-for-github-pages/#publishing-your-github-pages-site-from-a-docs-folder-on-your-master-branch)
+and to
+[create a `.nojekyll` file](https://www.bennadel.com/blog/3181-including-node-modules-and-vendors-folders-in-your-github-pages-site.htm)
+
+
+* [Firebase hosting](https://firebase.google.com/docs/hosting/): add a
+[rewrite rule](https://firebase.google.com/docs/hosting/url-redirects-rewrites#section-rewrites).
+
+  <code-example format=".">
+    "rewrites": [ {
+      "source": "**",
+      "destination": "/index.html"
+    } ]
+
+  </code-example>
+
+{@a cors}
+
+### Requesting services from a different server (CORS)
+
+Angular developers may encounter a
+<a href="https://en.wikipedia.org/wiki/Cross-origin_resource_sharing" title="Cross-origin resource sharing">
+<i>cross-origin resource sharing</i></a> error when making a service request (typically a data service request)
+to a server other than the application's own host server.
+Browsers forbid such requests unless the server permits them explicitly.
+
+There isn't anything the client application can do about these errors.
+The server must be configured to accept the application's requests.
+Read about how to enable CORS for specific servers at
+<a href="http://enable-cors.org/server.html" title="Enabling CORS server">enable-cors.org</a>.

aio/content/guide/displaying-data.md

@@ -42,7 +42,7 @@ changing the template and the body of the component.
 When you're done, it should look like this:
 
 
-<code-example path="displaying-data/src/app/app.component.1.ts" header="src/app/app.component.ts">
+<code-example path="displaying-data/src/app/app.component.1.ts" title="src/app/app.component.ts">
 
 </code-example>
 
@@ -54,7 +54,7 @@ The template displays the two component properties using double curly brace
 interpolation:
 
 
-<code-example path="displaying-data/src/app/app.component.1.ts" linenums="false" header="src/app/app.component.ts (template)" region="template">
+<code-example path="displaying-data/src/app/app.component.1.ts" linenums="false" title="src/app/app.component.ts (template)" region="template">
 
 </code-example>
 
@@ -98,7 +98,7 @@ The CSS `selector` in the `@Component` decorator specifies an element named `<ap
 That element is a placeholder in the body of your `index.html` file:
 
 
-<code-example path="displaying-data/src/index.html" linenums="false" header="src/index.html (body)" region="body">
+<code-example path="displaying-data/src/index.html" linenums="false" title="src/index.html (body)" region="body">
 
 </code-example>
 
@@ -135,7 +135,7 @@ In either style, the template data bindings have the same access to the componen
 
 <div class="alert is-helpful">
   
-  By default, the Angular CLI command [`ng generate component`](cli/generate) generates components with a template file. You can override that with:
+  By default, the Angular CLI generates components with a template file. You can override that with:
 
   <code-example hideCopy language="sh" class="code-shell">
     ng generate component hero -it
@@ -164,7 +164,7 @@ This app uses more terse "variable assignment" style simply for brevity.
 To display a list of heroes, begin by adding an array of hero names to the component and redefine `myHero` to be the first name in the array.
 
 
-<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" header="src/app/app.component.ts (class)" region="class">
+<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" title="src/app/app.component.ts (class)" region="class">
 
 </code-example>
 
@@ -174,7 +174,7 @@ Now use the Angular `ngFor` directive in the template to display
 each item in the `heroes` list.
 
 
-<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" header="src/app/app.component.ts (template)" region="template">
+<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" title="src/app/app.component.ts (template)" region="template">
 
 </code-example>
 
@@ -185,7 +185,7 @@ in the `<li>` element is the Angular "repeater" directive.
 It marks that `<li>` element (and its children) as the "repeater template":
 
 
-<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" header="src/app/app.component.ts (li)" region="li">
+<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" title="src/app/app.component.ts (li)" region="li">
 
 </code-example>
 
@@ -252,7 +252,7 @@ of hero names into an array of `Hero` objects. For that you'll need a `Hero` cla
 With the following code:
 
 
-<code-example path="displaying-data/src/app/hero.ts" linenums="false" header="src/app/hero.ts">
+<code-example path="displaying-data/src/app/hero.ts" linenums="false" title="src/app/hero.ts">
 
 </code-example>
 
@@ -266,7 +266,7 @@ The declaration of the constructor parameters takes advantage of a TypeScript sh
 Consider the first parameter:
 
 
-<code-example path="displaying-data/src/app/hero.ts" linenums="false" header="src/app/hero.ts (id)" region="id">
+<code-example path="displaying-data/src/app/hero.ts" linenums="false" title="src/app/hero.ts (id)" region="id">
 
 </code-example>
 
@@ -286,7 +286,7 @@ After importing the `Hero` class, the `AppComponent.heroes` property can return
 of `Hero` objects:
 
 
-<code-example path="displaying-data/src/app/app.component.3.ts" linenums="false" header="src/app/app.component.ts (heroes)" region="heroes">
+<code-example path="displaying-data/src/app/app.component.3.ts" linenums="false" title="src/app/app.component.ts (heroes)" region="heroes">
 
 </code-example>
 
@@ -297,7 +297,7 @@ At the moment it displays the hero's `id` and `name`.
 Fix that to display only the hero's `name` property.
 
 
-<code-example path="displaying-data/src/app/app.component.3.ts" linenums="false" header="src/app/app.component.ts (template)" region="template">
+<code-example path="displaying-data/src/app/app.component.3.ts" linenums="false" title="src/app/app.component.ts (template)" region="template">
 
 </code-example>
 
@@ -317,7 +317,7 @@ The Angular `ngIf` directive inserts or removes an element based on a _truthy/fa
 To see it in action, add the following paragraph at the bottom of the template:
 
 
-<code-example path="displaying-data/src/app/app.component.ts" linenums="false" header="src/app/app.component.ts (message)" region="message">
+<code-example path="displaying-data/src/app/app.component.ts" linenums="false" title="src/app/app.component.ts (message)" region="message">
 
 </code-example>
 
@@ -357,7 +357,7 @@ big chunks of HTML with many data bindings.
 
 
 Try it out. Because the array has four items, the message should appear.
-Go back into <code>app.component.ts</code> and delete or comment out one of the elements from the hero array.
+Go back into <code>app.component.ts"</code> and delete or comment out one of the elements from the hero array.
 The browser should refresh automatically and the message should disappear.
 
 
@@ -375,19 +375,19 @@ Here's the final code:
 
 <code-tabs>
 
-  <code-pane header="src/app/app.component.ts" path="displaying-data/src/app/app.component.ts" region="final">
+  <code-pane title="src/app/app.component.ts" path="displaying-data/src/app/app.component.ts" region="final">
 
   </code-pane>
 
-  <code-pane header="src/app/hero.ts" path="displaying-data/src/app/hero.ts">
+  <code-pane title="src/app/hero.ts" path="displaying-data/src/app/hero.ts">
 
   </code-pane>
 
-  <code-pane header="src/app/app.module.ts" path="displaying-data/src/app/app.module.ts">
+  <code-pane title="src/app/app.module.ts" path="displaying-data/src/app/app.module.ts">
 
   </code-pane>
 
-  <code-pane header="main.ts" path="displaying-data/src/main.ts">
+  <code-pane title="main.ts" path="displaying-data/src/main.ts">
 
   </code-pane>
 

aio/content/guide/docs-style-guide.md

@@ -310,22 +310,22 @@ _This_ "Authors Doc Style Guide" has its own sample application, located in the
 
 The following _code-example_ displays the sample's `app.module.ts`.
 
-<code-example path="docs-style-guide/src/app/app.module.ts" header="src/app/app.module.ts"></code-example>
+<code-example path="docs-style-guide/src/app/app.module.ts" title="src/app/app.module.ts"></code-example>
 
 Here's the brief markup that produced that lengthy snippet:
 
 ```html
 <code-example
   path="docs-style-guide/src/app/app.module.ts"
-  header="src/app/app.module.ts">
+  title="src/app/app.module.ts">
 </code-example>
 ```
 
 You identified the snippet's source file by setting the `path` attribute to sample folder's location _within_ `content/examples`.
 In this example, that path is  `docs-style-guide/src/app/app.module.ts`.
 
-You added a header to tell the reader where to find the file by setting the `header` attribute.
-Following convention, you set the `header` attribute to the file's location within the sample's root folder.
+You added a header to tell the reader where to find the file by setting the `title` attribute.
+Following convention, you set the `title` attribute to the file's location within the sample's root folder.
 
 <div class="alert is-helpful">
 
@@ -343,7 +343,7 @@ If you want to include an ignored code file in your project and display it in a
 
 The preferred way to un-ignore a file is to update the `content/examples/.gitignore` like this:
 
-<code-example header="content/examples/.gitignore">
+<code-example title="content/examples/.gitignore">
   # my-guide
   !my-guide/src/something.js
   !my-guide/more-javascript*.js
@@ -357,7 +357,7 @@ You control the _code-example_ output by setting one or more of its attributes:
 
 * `path`- the path to the file in the `content/examples` folder.
 
-* `header`- the header of the code listing.
+* `title`- the header of the code listing.
 
 * `region`- displays the source file fragment with that region name; regions are identified by _docregion_ markup in the source file, as explained [below](#region "Displaying a code fragment").
 
@@ -395,7 +395,7 @@ A couple of observations:
 
 1. The `region` value, `"class"`, is the name of the `#docregion` in the source file. Confirm that by looking at `content/examples/docs-style-guide/src/app/app.module.ts`
 
-1. Omitting the `header` is fine when the source of the fragment is obvious. We just said that this is a fragment of the `app.module.ts` file which was displayed immediately above, in full, with a header.
+1. Omitting the `title` is fine when the source of the fragment is obvious. We just said that this is a fragment of the `app.module.ts` file which was displayed immediately above, in full, with a header.
 There's no need to repeat the header.
 
 1. The line numbers disappeared. By default, the doc viewer omits line numbers when there are fewer than 10 lines of code; it adds line numbers after that. You can turn line numbers on or off explicitly by setting the `linenums` attribute.
@@ -415,11 +415,11 @@ Here's the markup for an "avoid" example in the
 <code-example
   path="styleguide/src/05-03/app/heroes/shared/hero-button/hero-button.component.avoid.ts"
   region="example"
-  header="app/heroes/hero-button/hero-button.component.ts">
+  title="app/heroes/hero-button/hero-button.component.ts">
 </code-example>
 ```
 
-<code-example path="styleguide/src/05-03/app/heroes/shared/hero-button/hero-button.component.avoid.ts" region="example" header="app/heroes/hero-button/hero-button.component.ts">
+<code-example path="styleguide/src/05-03/app/heroes/shared/hero-button/hero-button.component.avoid.ts" region="example" title="app/heroes/hero-button/hero-button.component.ts">
 </code-example>
 
 {@a code-tabs}
@@ -434,29 +434,29 @@ Code tabs display code much like _code examples_ do.  The added advantage is tha
 #### Code-pane attributes
 
 * `path` - a file in the content/examples folder
-* `header` - seen in the header of a tab
+* `title` - seen in the header of a tab
 * `linenums` - overrides the `linenums` property at the `code-tabs` level for this particular pane. The value can be `true`, `false` or a number indicating the starting line number. If not specified, line numbers are enabled only when the number of lines of code are greater than 10.
 
-The next example displays multiple code tabs, each with its own header.
+The next example displays multiple code tabs, each with its own title.
 It demonstrates control over display of line numbers at both the `<code-tabs>` and `<code-pane>` levels.
 
 <code-tabs linenums="false">
   <code-pane
-    header="app.component.html"
+    title="app.component.html"
     path="docs-style-guide/src/app/app.component.html">
   </code-pane>
   <code-pane
-    header="app.component.ts"
+    title="app.component.ts"
     path="docs-style-guide/src/app/app.component.ts"
     linenums="true">
   </code-pane>
   <code-pane
-    header="app.component.css (heroes)"
+    title="app.component.css (heroes)"
     path="docs-style-guide/src/app/app.component.css"
     region="heroes">
   </code-pane>
   <code-pane
-    header="package.json (scripts)"
+    title="package.json (scripts)"
     path="docs-style-guide/package.1.json">
   </code-pane>
 </code-tabs>
@@ -469,21 +469,21 @@ The `linenums` attribute in the second pane restores line numbering for _itself
 ```html
 <code-tabs linenums="false">
   <code-pane
-    header="app.component.html"
+    title="app.component.html"
     path="docs-style-guide/src/app/app.component.html">
   </code-pane>
   <code-pane
-    header="app.component.ts"
+    title="app.component.ts"
     path="docs-style-guide/src/app/app.component.ts"
     linenums="true">
   </code-pane>
   <code-pane
-    header="app.component.css (heroes)"
+    title="app.component.css (heroes)"
     path="docs-style-guide/src/app/app.component.css"
     region="heroes">
   </code-pane>
   <code-pane
-    header="package.json (scripts)"
+    title="package.json (scripts)"
     path="docs-style-guide/package.1.json">
   </code-pane>
 </code-tabs>
@@ -548,7 +548,7 @@ The `src/main.ts` is a simple example of a file with a single _#docregion_ at th
 
 <code-example
   path="docs-style-guide/src/main.ts"
-  header="src/main.ts"></code-example>
+  title="src/main.ts"></code-example>
 
 </div>
 
@@ -622,12 +622,12 @@ Here's are the two corresponding code snippets displayed side-by-side.
 
 <code-tabs>
   <code-pane
-    header="app.component.ts (class)"
+    title="app.component.ts (class)"
     path="docs-style-guide/src/app/app.component.ts"
     region="class">
   </code-pane>
   <code-pane
-    header="app.component.ts (class-skeleton)"
+    title="app.component.ts (class-skeleton)"
     path="docs-style-guide/src/app/app.component.ts"
     region="class-skeleton">
   </code-pane>
@@ -660,12 +660,12 @@ Here's an example that excerpts certain scripts from `package.json` into a parti
 
 <code-example
   path="docs-style-guide/package.1.json"
-  header="package.json (selected scripts)"></code-example>
+  title="package.json (selected scripts)"></code-example>
 
 ```html
 <code-example
   path="docs-style-guide/package.1.json"
-  header="package.json (selected scripts)"></code-example>
+  title="package.json (selected scripts)"></code-example>
 ```
 
 #### Partial file naming
@@ -689,7 +689,7 @@ Remember to exclude these files from stackblitz by listing them in the `stackbli
 
 <code-example
   path="docs-style-guide/stackblitz.json"
-  header="stackblitz.json"></code-example>
+  title="stackblitz.json"></code-example>
 
 {@a live-examples}
 ## Live examples

aio/content/guide/dynamic-component-loader.md

@@ -35,7 +35,7 @@ The ad banner uses a helper directive called `AdDirective` to
 mark valid insertion points in the template.
 
 
-<code-example path="dynamic-component-loader/src/app/ad.directive.ts" header="src/app/ad.directive.ts" linenums="false">
+<code-example path="dynamic-component-loader/src/app/ad.directive.ts" title="src/app/ad.directive.ts" linenums="false">
 
 </code-example>
 
@@ -62,7 +62,7 @@ To apply the `AdDirective`, recall the selector from `ad.directive.ts`,
 where to dynamically load components.
 
 
-<code-example path="dynamic-component-loader/src/app/ad-banner.component.ts" region="ad-host" header="src/app/ad-banner.component.ts (template)" linenums="false">
+<code-example path="dynamic-component-loader/src/app/ad-banner.component.ts" region="ad-host" title="src/app/ad-banner.component.ts (template)" linenums="false">
 
 </code-example>
 
@@ -91,7 +91,7 @@ With its `getAds()` method, `AdBannerComponent` cycles through the array of `AdI
 and loads a new component every 3 seconds by calling `loadComponent()`.
 
 
-<code-example path="dynamic-component-loader/src/app/ad-banner.component.ts" region="class" header="src/app/ad-banner.component.ts (excerpt)" linenums="false">
+<code-example path="dynamic-component-loader/src/app/ad-banner.component.ts" region="class" title="src/app/ad-banner.component.ts (excerpt)" linenums="false">
 
 </code-example>
 
@@ -150,7 +150,7 @@ dynamically loaded components since they load at runtime.
 To ensure that the compiler still generates a factory,
 add dynamically loaded components to the `NgModule`'s `entryComponents` array:
 
-<code-example path="dynamic-component-loader/src/app/app.module.ts" region="entry-components" header="src/app/app.module.ts (entry components)" linenums="false">
+<code-example path="dynamic-component-loader/src/app/app.module.ts" region="entry-components" title="src/app/app.module.ts (entry components)" linenums="false">
 
 </code-example>
 
@@ -169,15 +169,15 @@ Here are two sample components and the `AdComponent` interface for reference:
 
 <code-tabs>
 
-  <code-pane header="hero-job-ad.component.ts" path="dynamic-component-loader/src/app/hero-job-ad.component.ts">
+  <code-pane title="hero-job-ad.component.ts" path="dynamic-component-loader/src/app/hero-job-ad.component.ts">
 
   </code-pane>
 
-  <code-pane header="hero-profile.component.ts" path="dynamic-component-loader/src/app/hero-profile.component.ts">
+  <code-pane title="hero-profile.component.ts" path="dynamic-component-loader/src/app/hero-profile.component.ts">
 
   </code-pane>
 
-  <code-pane header="ad.component.ts" path="dynamic-component-loader/src/app/ad.component.ts">
+  <code-pane title="ad.component.ts" path="dynamic-component-loader/src/app/ad.component.ts">
 
   </code-pane>
 

aio/content/guide/dynamic-form.md

@@ -40,11 +40,11 @@ Bootstrap the `AppModule` in `main.ts`.
 
 <code-tabs>
 
-  <code-pane header="app.module.ts" path="dynamic-form/src/app/app.module.ts">
+  <code-pane title="app.module.ts" path="dynamic-form/src/app/app.module.ts">
 
   </code-pane>
 
-  <code-pane header="main.ts" path="dynamic-form/src/main.ts">
+  <code-pane title="main.ts" path="dynamic-form/src/main.ts">
 
   </code-pane>
 
@@ -62,7 +62,7 @@ The _question_ is the most fundamental object in the model.
 The following `QuestionBase` is a fundamental question class.
 
 
-<code-example path="dynamic-form/src/app/question-base.ts" header="src/app/question-base.ts">
+<code-example path="dynamic-form/src/app/question-base.ts" title="src/app/question-base.ts">
 
 </code-example>
 
@@ -77,7 +77,7 @@ appropriate controls dynamically.
 via the `type` property.
 
 
-<code-example path="dynamic-form/src/app/question-textbox.ts" header="src/app/question-textbox.ts" linenums="false">
+<code-example path="dynamic-form/src/app/question-textbox.ts" title="src/app/question-textbox.ts" linenums="false">
 
 </code-example>
 
@@ -86,7 +86,7 @@ via the `type` property.
 `DropdownQuestion` presents a list of choices in a select box.
 
 
-<code-example path="dynamic-form/src/app/question-dropdown.ts" header="src/app/question-dropdown.ts" linenums="false">
+<code-example path="dynamic-form/src/app/question-dropdown.ts" title="src/app/question-dropdown.ts" linenums="false">
 
 </code-example>
 
@@ -97,7 +97,7 @@ In a nutshell, the form group consumes the metadata from the question model and
 allows you to specify default values and validation rules.
 
 
-<code-example path="dynamic-form/src/app/question-control.service.ts" header="src/app/question-control.service.ts" linenums="false">
+<code-example path="dynamic-form/src/app/question-control.service.ts" title="src/app/question-control.service.ts" linenums="false">
 
 </code-example>
 
@@ -112,11 +112,11 @@ to create components to represent the dynamic form.
 
 <code-tabs>
 
-  <code-pane header="dynamic-form.component.html" path="dynamic-form/src/app/dynamic-form.component.html">
+  <code-pane title="dynamic-form.component.html" path="dynamic-form/src/app/dynamic-form.component.html">
 
   </code-pane>
 
-  <code-pane header="dynamic-form.component.ts" path="dynamic-form/src/app/dynamic-form.component.ts">
+  <code-pane title="dynamic-form.component.ts" path="dynamic-form/src/app/dynamic-form.component.ts">
 
   </code-pane>
 
@@ -132,11 +132,11 @@ question based on values in the data-bound question object.
 
 <code-tabs>
 
-  <code-pane header="dynamic-form-question.component.html" path="dynamic-form/src/app/dynamic-form-question.component.html">
+  <code-pane title="dynamic-form-question.component.html" path="dynamic-form/src/app/dynamic-form-question.component.html">
 
   </code-pane>
 
-  <code-pane header="dynamic-form-question.component.ts" path="dynamic-form/src/app/dynamic-form-question.component.ts">
+  <code-pane title="dynamic-form-question.component.ts" path="dynamic-form/src/app/dynamic-form-question.component.ts">
 
   </code-pane>
 
@@ -169,7 +169,7 @@ directly since you imported `ReactiveFormsModule` from `AppModule`.
  and removing objects from the `questions` array.
 
 
-<code-example path="dynamic-form/src/app/question.service.ts" header="src/app/question.service.ts">
+<code-example path="dynamic-form/src/app/question.service.ts" title="src/app/question.service.ts">
 
 </code-example>
 
@@ -178,7 +178,7 @@ directly since you imported `ReactiveFormsModule` from `AppModule`.
 Finally, display an instance of the form in the `AppComponent` shell.
 
 
-<code-example path="dynamic-form/src/app/app.component.ts" header="app.component.ts">
+<code-example path="dynamic-form/src/app/app.component.ts" title="app.component.ts">
 
 </code-example>
 

aio/content/guide/elements.md

@@ -107,7 +107,7 @@ The recently-developed [custom elements](https://developer.mozilla.org/en-US/doc
 </tr>
 <tr>
   <td>Firefox</td>
-  <td>Supported natively as of version 63. In older versions: Set the <code>dom.webcomponents.enabled</code> and <code>dom.webcomponents.customelements.enabled</code> preferences to true.</td>
+  <td> Set the <code>dom.webcomponents.enabled</code> and <code>dom.webcomponents.customelements.enabled</code> preferences to true. Planned to be enabled by default in version 63.</td>
 </tr>
 <tr>
   <td>Edge</td>
@@ -119,7 +119,7 @@ The recently-developed [custom elements](https://developer.mozilla.org/en-US/doc
 
 In browsers that support Custom Elements natively, the specification requires developers use ES2015 classes to define Custom Elements - developers can opt-in to this by setting the `target: "es2015"` property in their project's `tsconfig.json`. As Custom Element and ES2015 support may not be available in all browsers, developers can instead choose to use a polyfill to support older browsers and ES5 code.
 
-Use the [Angular CLI](cli) to automatically set up your project with the correct polyfill: `ng add @angular/elements --name=*your_project_name*`.
+Use the [Angular CLI](https://cli.angular.io/) to automatically set up your project with the correct polyfill: `ng add @angular/elements --name=*your_project_name*`.
 - For more information about polyfills, see [polyfill documentation](https://www.webcomponents.org/polyfills).
 
 - For more information about Angular browser support, see [Browser Support](guide/browser-support).
@@ -142,19 +142,19 @@ For comparison, the demo shows both methods. One button adds the popup using the
 
 <code-tabs>
 
-  <code-pane header="popup.component.ts" path="elements/src/app/popup.component.ts">
+  <code-pane title="popup.component.ts" path="elements/src/app/popup.component.ts">
 
   </code-pane>
 
-  <code-pane header="popup.service.ts" path="elements/src/app/popup.service.ts">
+  <code-pane title="popup.service.ts" path="elements/src/app/popup.service.ts">
 
   </code-pane>
 
-  <code-pane header="app.module.ts" path="elements/src/app/app.module.ts">
+  <code-pane title="app.module.ts" path="elements/src/app/app.module.ts">
 
   </code-pane>
 
-  <code-pane header="app.component.ts" path="elements/src/app/app.component.ts">
+  <code-pane title="app.component.ts" path="elements/src/app/app.component.ts">
 
   </code-pane>
 </code-tabs>

aio/content/guide/feature-modules.md

@@ -33,7 +33,7 @@ pipes that it shares.
 
 ## How to make a feature module
 
-Assuming you already have an app that you created with the [Angular CLI](cli), create a feature
+Assuming you already have a CLI generated app, create a feature
 module using the CLI by entering the following command in the
 root project directory. Replace `CustomerDashboard` with the
 name of your module. You can omit the "Module" suffix from the name because the CLI appends it:
@@ -72,7 +72,7 @@ ng generate component customer-dashboard/CustomerDashboard
 This generates a folder for the new component within the customer-dashboard folder and updates the feature module with the `CustomerDashboardComponent` info:
 
 
-<code-example path="feature-modules/src/app/customer-dashboard/customer-dashboard.module.ts" region="customer-dashboard-component" header="src/app/customer-dashboard/customer-dashboard.module.ts" linenums="false">
+<code-example path="feature-modules/src/app/customer-dashboard/customer-dashboard.module.ts" region="customer-dashboard-component" title="src/app/customer-dashboard/customer-dashboard.module.ts" linenums="false">
 </code-example>
 
 
@@ -83,7 +83,7 @@ The `CustomerDashboardComponent` is now in the JavaScript import list at the top
 
 To incorporate the feature module into your app, you have to let the root module, `app.module.ts`, know about it. Notice the `CustomerDashboardModule` export at the bottom of `customer-dashboard.module.ts`. This exposes it so that other modules can get to it. To import it into the `AppModule`, add it to the imports in `app.module.ts` and to the `imports` array:
 
-<code-example path="feature-modules/src/app/app.module.ts" region="app-module" header="src/app/app.module.ts" linenums="false">
+<code-example path="feature-modules/src/app/app.module.ts" region="app-module" title="src/app/app.module.ts" linenums="false">
 </code-example>
 
 
@@ -94,20 +94,20 @@ Now the `AppModule` knows about the feature module. If you were to add any servi
 
 When the CLI generated the `CustomerDashboardComponent` for the feature module, it included a template, `customer-dashboard.component.html`, with the following markup:
 
-<code-example path="feature-modules/src/app/customer-dashboard/customer-dashboard/customer-dashboard.component.html" region="feature-template" header="src/app/customer-dashboard/customer-dashboard/customer-dashboard.component.html" linenums="false">
+<code-example path="feature-modules/src/app/customer-dashboard/customer-dashboard/customer-dashboard.component.html" region="feature-template" title="src/app/customer-dashboard/customer-dashboard/customer-dashboard.component.html" linenums="false">
 </code-example>
 
 
-To see this HTML in the `AppComponent`, you first have to export the `CustomerDashboardComponent` in the `CustomerDashboardModule`. In `customer-dashboard.module.ts`, just beneath the `declarations` array, add an `exports` array containing `CustomerDashboardComponent`:
+To see this HTML in the `AppComponent`, you first have to export the `CustomerDashboardComponent` in the `CustomerDashboardModule`. In `customer-dashboard.module.ts`, just beneath the `declarations` array, add an `exports` array containing `CustomerDashboardModule`:
 
-<code-example path="feature-modules/src/app/customer-dashboard/customer-dashboard.module.ts" region="component-exports" header="src/app/customer-dashboard/customer-dashboard.module.ts" linenums="false">
+<code-example path="feature-modules/src/app/customer-dashboard/customer-dashboard.module.ts" region="component-exports" title="src/app/customer-dashboard/customer-dashboard.module.ts" linenums="false">
 </code-example>
 
 
 
 Next, in the `AppComponent`, `app.component.html`, add the tag `<app-customer-dashboard>`:
 
-<code-example path="feature-modules/src/app/app.component.html" region="app-component-template" header="src/app/app.component.html" linenums="false">
+<code-example path="feature-modules/src/app/app.component.html" region="app-component-template" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 

aio/content/guide/file-structure.md

@@ -1,113 +0,0 @@
-# Workspace and project file structure
-
-You develop apps in the context of an Angular [workspace](guide/glossary#workspace). A workspace contains the files for one or more [projects](guide/glossary#project). A project is the set of files that comprise a standalone app, a library, or a set of end-to-end (e2e) tests. 
-
-The Angular CLI command `ng new <project_name>` gets you started. 
-When you run this command, the CLI installs the necessary Angular npm packages and other dependencies in a new workspace, with a root folder named *project_name*. 
-It also creates the following workspace and starter project files:
-
-* An initial skeleton app project, also called *project_name* (in the `src/` subfolder).
-* An end-to-end test project (in the `e2e/` subfolder).
-* Related configuration files.
-
-The initial app project contains a simple Welcome app, ready to run. 
-
-## Workspace files
-
-The top level of the workspace contains a number of workspace-wide configuration files.
-
-| WORKSPACE CONFIG FILES    | PURPOSE |
-| :--------------------- | :------------------------------------------|
-| `.editorconfig`        | Configuration for code editors. See [EditorConfig](https://editorconfig.org/). |
-| `.gitignore`           | Specifies intentionally untracked files that [Git](https://git-scm.com/) should ignore. |
-| `angular.json`         | CLI configuration defaults for all projects in the workspace, including configuration options for build, serve, and test tools that the CLI uses, such as [TSLint](https://palantir.github.io/tslint/), [Karma](https://karma-runner.github.io/), and [Protractor](http://www.protractortest.org/). For details, see [Angular Workspace Configuration](guide/workspace-config). |
-| `node_modules`         | Provides [npm packages](guide/npm-packages) to the entire workspace. |
-| `package.json`         | Configures [npm package dependencies](guide/npm-packages) that are available to all projects in the workspace. See [npm documentation](https://docs.npmjs.com/files/package.json) for the specific format and contents of this file. |
-| `package-lock.json`    | Provides version information for all packages installed into `node_modules` by the npm client. See [npm documentation](https://docs.npmjs.com/files/package-lock.json) for details. If you use the yarn client, this file will be [yarn.lock](https://yarnpkg.com/lang/en/docs/yarn-lock/) instead. |
-| `tsconfig.json`        | Default [TypeScript](https://www.typescriptlang.org/) configuration for apps in the workspace, including TypeScript and Angular template compiler options. See [TypeScript Configuration](guide/typescript-configuration). |
-| `tslint.json`          | Default [TSLint](https://palantir.github.io/tslint/) configuration for apps in the workspace. |
-| `README.md`            | Introductory documentation. |
-
-All projects within a workspace share a [CLI configuration context](guide/workspace-config). 
-Project-specific [TypeScript](https://www.typescriptlang.org/) configuration files inherit from the workspace-wide `tsconfig.*.json`, and app-specific [TSLint](https://palantir.github.io/tslint/) configuration files inherit from the workspace-wide `tslint.json`.
-
-### Default app project files
-
-The CLI command `ng new my-app` creates a workspace folder named "my-app" and generates a new app skeleton. 
-This initial app is the *default app* for CLI commands (unless you change the default after creating additional apps). 
-
-A newly generated app contains the source files for a root module, with a root component and template. 
-When the workspace file structure is in place, you can use the `ng generate` command on the command line to add functionality and data to the initial app.
-
-<div class="alert is-helpful">
-
-   Besides using the CLI on the command line, you can also use an interactive development environment like [Angular Console](https://angularconsole.com/), or manipulate files directly in the app's source folder and configuration files.
-
-</div>
-
-The `src/` subfolder contains the source files (app logic, data, and assets), along with configuration files for the initial app.
-Workspace-wide `node_modules` dependencies are visible to this project.
-
-| APP SOURCE & CONFIG FILES    | PURPOSE |
-| :--------------------- | :------------------------------------------|
-| `app/`                 | Contains the component files in which your app logic and data are defined. See details in [App source folder](#app-src) below. |
-| `assets/`              | Contains image files and other asset files to be copied as-is when you build your application. | 
-| `environments/`        | Contains build configuration options for particular target environments. By default there is an unnamed standard development environment and a production ("prod") environment. You can define additional target environment configurations. |
-| `browserlist`          | Configures sharing of target browsers and Node.js versions among various front-end tools. See [Browserlist on GitHub](https://github.com/browserslist/browserslist) for more information.  |
-| `favicon.ico`          | An icon to use for this app in the bookmark bar. |
-| `index.html`           | The main HTML page that is served when someone visits your site. The CLI automatically adds all JavaScript and CSS files when building your app, so you typically don't need to add any `<script>` or` <link>` tags here manually. |
-| `main.ts`              | The main entry point for your app. Compiles the application with the [JIT compiler](https://angular.io/guide/glossary#jit) and bootstraps the application's root module (AppModule) to run in the browser. You can also use the [AOT compiler](https://angular.io/guide/aot-compiler) without changing any code by appending the `--aot` flag to the CLI `build` and `serve` commands. |
-| `polyfills.ts`         | Provides polyfill scripts for browser support. |
-| `styles.sass`          | Lists CSS files that supply styles for a project. The extension reflects the style preprocessor you have configured for the project. |
-| `test.ts`              | The main entry point for your unit tests, with some Angular-specific configuration. You don't typically need to edit this file. |
-| `tsconfig.app.json`   | Inherits from the workspace-wide `tsconfig.json` file. |
-| `tsconfig.spec.json`  | Inherits from the workspace-wide `tsconfig.json` file. |
-| `tslint.json`         | Inherits from the workspace-wide `tslint.json` file. |
-
-### Default app project e2e files
-
-An `e2e/` subfolder contains configuration and source files for a set of end-to-end tests that correspond to the initial app.
-Workspace-wide `node_modules` dependencies are visible to this project.
-
-<code-example language="none" linenums="false">
-my-app/
-  e2e/                  (end-to-end test app for my-app)
-    src/                (app source files)
-    protractor.conf.js  (test-tool config)
-    tsconfig.e2e.json   (TypeScript config inherits from workspace tsconfig.json)
-</code-example>
-
-### Project folders for additional apps and libraries
-
-When you generate new projects in a workspace, 
-the CLI creates a new *workspace*`/projects` folder, and adds the generated files there.
-
-When you generate an app (`ng generate application my-other-app`), the CLI adds folders under `projects/` for both the app and its corresponding end-to-end tests. Newly generated libraries are also added under `projects/`.
-
-<code-example language="none" linenums="false">
-my-app/
-  ...
-  projects/           (additional apps and libs)
-    my-other-app/     (a second app)
-      src/
-      (config files)
-    my-other-app-e2e/  (corresponding test app) 
-      src/
-      (config files)
-    my-lib/            (a generated library)
-      (config files)
-</code-example>
-
-{@a app-src}
-## App source folder
-
-Inside the `src/` folder, the `app/` folder contains your app's logic and data. Angular components, templates, and styles go here. An `assets/` subfolder contains images and anything else your app needs. Files at the top level of `src/` support testing and running your app.
-
-| APP SOURCE FILES | PURPOSE |
-| :-------------------------- | :------------------------------------------|
-| `app/app.component.ts`      | Defines the logic for the app's root component, named `AppComponent`. The view associated with this root component becomes the root of the [view hierarchy](guide/glossary#view-hierarchy) as you add components and services to your app. |
-| `app/app.component.html`    | Defines the HTML template associated with the root `AppComponent`. |
-| `app/app.component.css`     | Defines the base CSS stylesheet for the root `AppComponent`. |
-| `app/app.component.spec.ts` | Defines a unit test for the root `AppComponent`. |
-| `app/app.module.ts`         | Defines the root module, named `AppModule`, that tells Angular how to assemble the application. Initially declares only the `AppComponent`. As you add more components to the app, they must be declared here. |
-| `assets/*`                  | Contains image files and other asset files to be copied as-is when you build your application. |

aio/content/guide/form-validation.md

@@ -29,7 +29,7 @@ either a list of validation errors, which results in an INVALID status, or null,
 You can then inspect the control's state by exporting `ngModel` to a local template variable.
 The following example exports `NgModel` into a variable called `name`:
 
-<code-example path="form-validation/src/app/template/hero-form-template.component.html" region="name-with-error-msg" header="template/hero-form-template.component.html (name)" linenums="false">
+<code-example path="form-validation/src/app/template/hero-form-template.component.html" region="name-with-error-msg" title="template/hero-form-template.component.html (name)" linenums="false">
 
 </code-example>
 
@@ -92,7 +92,7 @@ built-in validators&mdash;this time, in function form. See below:
 
 {@a reactive-component-class}
 
-<code-example path="form-validation/src/app/reactive/hero-form-reactive.component.1.ts" region="form-group" header="reactive/hero-form-reactive.component.ts (validator functions)" linenums="false">
+<code-example path="form-validation/src/app/reactive/hero-form-reactive.component.1.ts" region="form-group" title="reactive/hero-form-reactive.component.ts (validator functions)" linenums="false">
 </code-example>
 
 Note that:
@@ -106,7 +106,7 @@ for the template.
 
 If you look at the template for the name input again, it is fairly similar to the template-driven example.
 
-<code-example path="form-validation/src/app/reactive/hero-form-reactive.component.html" region="name-with-error-msg" header="reactive/hero-form-reactive.component.html (name with error msg)" linenums="false">
+<code-example path="form-validation/src/app/reactive/hero-form-reactive.component.html" region="name-with-error-msg" title="reactive/hero-form-reactive.component.html (name with error msg)" linenums="false">
 </code-example>
 
 Key takeaways:
@@ -125,7 +125,7 @@ Consider the `forbiddenNameValidator` function from previous
 [examples](guide/form-validation#reactive-component-class) in
 this guide. Here's what the definition of that function looks like:
 
-<code-example path="form-validation/src/app/shared/forbidden-name.directive.ts" region="custom-validator" header="shared/forbidden-name.directive.ts (forbiddenNameValidator)" linenums="false">
+<code-example path="form-validation/src/app/shared/forbidden-name.directive.ts" region="custom-validator" title="shared/forbidden-name.directive.ts (forbiddenNameValidator)" linenums="false">
 </code-example>
 
 The function is actually a factory that takes a regular expression to detect a _specific_ forbidden name and returns a validator function.
@@ -148,7 +148,7 @@ at which point the form uses the last value emitted for validation.
 In reactive forms, custom validators are fairly simple to add. All you have to do is pass the function directly
 to the `FormControl`.
 
-<code-example path="form-validation/src/app/reactive/hero-form-reactive.component.1.ts" region="custom-validator" header="reactive/hero-form-reactive.component.ts (validator functions)" linenums="false">
+<code-example path="form-validation/src/app/reactive/hero-form-reactive.component.1.ts" region="custom-validator" title="reactive/hero-form-reactive.component.ts (validator functions)" linenums="false">
 </code-example>
 
 ### Adding to template-driven forms
@@ -161,19 +161,19 @@ The corresponding `ForbiddenValidatorDirective` serves as a wrapper around the `
 Angular recognizes the directive's role in the validation process because the directive registers itself
 with the `NG_VALIDATORS` provider, a provider with an extensible collection of validators.
 
-<code-example path="form-validation/src/app/shared/forbidden-name.directive.ts" region="directive-providers" header="shared/forbidden-name.directive.ts (providers)" linenums="false">
+<code-example path="form-validation/src/app/shared/forbidden-name.directive.ts" region="directive-providers" title="shared/forbidden-name.directive.ts (providers)" linenums="false">
 </code-example>
 
 The directive class then implements the `Validator` interface, so that it can easily integrate
 with Angular forms. Here is the rest of the directive to help you get an idea of how it all
 comes together:
 
-<code-example path="form-validation/src/app/shared/forbidden-name.directive.ts" region="directive" header="shared/forbidden-name.directive.ts (directive)">
+<code-example path="form-validation/src/app/shared/forbidden-name.directive.ts" region="directive" title="shared/forbidden-name.directive.ts (directive)">
 </code-example>
 
 Once the `ForbiddenValidatorDirective` is ready, you can simply add its selector, `appForbiddenName`, to any input element to activate it. For example:
 
-<code-example path="form-validation/src/app/template/hero-form-template.component.html" region="name-input" header="template/hero-form-template.component.html (forbidden-name-input)" linenums="false">
+<code-example path="form-validation/src/app/template/hero-form-template.component.html" region="name-input" title="template/hero-form-template.component.html (forbidden-name-input)" linenums="false">
 
 </code-example>
 
@@ -204,7 +204,7 @@ Like in AngularJS, Angular automatically mirrors many control properties onto th
 The hero form uses the `.ng-valid` and `.ng-invalid` classes to
 set the color of each form control's border.
 
-<code-example path="form-validation/src/assets/forms.css" header="forms.css (status classes)">
+<code-example path="form-validation/src/assets/forms.css" title="forms.css (status classes)">
 
 </code-example>
 
@@ -245,7 +245,7 @@ const heroForm = new FormGroup({
 
 The validator code is as follows:
 
-<code-example path="form-validation/src/app/shared/identity-revealed.directive.ts" region="cross-validation-validator" header="shared/identity-revealed.directive.ts" linenums="false">
+<code-example path="form-validation/src/app/shared/identity-revealed.directive.ts" region="cross-validation-validator" title="shared/identity-revealed.directive.ts" linenums="false">
 </code-example>
 
 The identity validator implements the `ValidatorFn` interface. It takes an Angular control object as an argument and returns either null if the form is valid, or `ValidationErrors` otherwise.
@@ -255,7 +255,7 @@ First we retrieve the child controls by calling the `FormGroup`'s [get](api/form
 If the values do not match, the hero's identity remains secret, and we can safely return null. Otherwise, the hero's identity is revealed and we must mark the form as invalid by returning an error object.
 
 Next, to provide better user experience, we show an appropriate error message when the form is invalid.
-<code-example path="form-validation/src/app/reactive/hero-form-reactive.component.html" region="cross-validation-error-message" header="reactive/hero-form-template.component.html" linenums="false">
+<code-example path="form-validation/src/app/reactive/hero-form-reactive.component.html" region="cross-validation-error-message" title="reactive/hero-form-template.component.html" linenums="false">
 </code-example>
 
 Note that we check if:
@@ -265,15 +265,15 @@ Note that we check if:
 ### Adding to template driven forms
 First we must create a directive that will wrap the validator function. We provide it as the validator using the `NG_VALIDATORS` token. If you are not sure why, or you do not fully understand the syntax, revisit the previous [section](guide/form-validation#adding-to-template-driven-forms).
 
-<code-example path="form-validation/src/app/shared/identity-revealed.directive.ts" region="cross-validation-directive" header="shared/identity-revealed.directive.ts" linenums="false">
+<code-example path="form-validation/src/app/shared/identity-revealed.directive.ts" region="cross-validation-directive" title="shared/identity-revealed.directive.ts" linenums="false">
 </code-example>
 
 Next, we have to add the directive to the html template. Since the validator must be registered at the highest level in the form, we put the directive on the `form` tag.
-<code-example path="form-validation/src/app/template/hero-form-template.component.html" region="cross-validation-register-validator" header="template/hero-form-template.component.html" linenums="false">
+<code-example path="form-validation/src/app/template/hero-form-template.component.html" region="cross-validation-register-validator" title="template/hero-form-template.component.html" linenums="false">
 </code-example>
 
 To provide better user experience, we show an appropriate error message when the form is invalid.
-<code-example path="form-validation/src/app/template/hero-form-template.component.html" region="cross-validation-error-message" header="template/hero-form-template.component.html" linenums="false">
+<code-example path="form-validation/src/app/template/hero-form-template.component.html" region="cross-validation-error-message" title="template/hero-form-template.component.html" linenums="false">
 </code-example>
 
 Note that we check if:

aio/content/guide/forms-overview.md

@@ -1,21 +1,21 @@
 # Introduction to forms in Angular
 
-Handling user input with forms is the cornerstone of many common applications. Applications use forms to enable users to log in, to update a profile, to enter sensitive information, and to perform many other data-entry tasks. 
+Handling user input with forms is the cornerstone of many common applications. Applications use forms to enable users log in, to update a profile, to enter sensitive information, and to perform many other data-entry tasks. 
 
 Angular provides two different approaches to handling user input through forms: reactive and template-driven. Both capture user input events from the view, validate the user input, create a form model and data model to update, and provide a way to track changes. 
 
-Reactive and template-driven forms process and manage form data differently. Each offers different advantages.
+Reactive and template-driven forms differ, however, in how they do the work of processing and managing forms and form data. Each offers different advantages.
 
 **In general:**
 
-* **Reactive forms** are more robust: they're more scalable, reusable, and testable. If forms are a key part of your application, or you're already using reactive patterns for building your application, use reactive forms.
-* **Template-driven forms** are useful for adding a simple form to an app, such as an email list signup form. They're easy to add to an app, but they don't scale as well as reactive forms. If you have very basic form requirements and logic that can be managed solely in the template, use template-driven forms.
+* **Reactive forms** are more robust: they are more scalable, reusable, and testable. If forms are a key part of your application, or you're already using reactive patterns for building your application, use reactive forms.
+* **Template-driven forms** are useful for adding a simple form to an app, such as an email list signup form. They are easy to add to an app, but they do not scale as well as reactive forms. If you have very basic form requirements and logic that can be managed solely in the template, use template-driven forms.
 
-This guide provides information to help you decide which type of form works best for your situation. It introduces the common building blocks used by both approaches. It also summarizes the key differences between the two approaches, and demonstrates those differences in the context of setup, data flow, and testing.
+This guide provides information to help you decide which approach works best for your situation. It introduces the common building blocks used by both approaches. It also summarizes the key differences between the two approaches, and demonstrates those differences in the context of setup, data flow, and testing.
 
-<div class="alert is-helpful">
+<div class="alert is-important">
 
-**Note:** For complete information about each kind of form, see [Reactive Forms](guide/reactive-forms) and [Template-driven Forms](guide/forms).
+*Note:* For complete information about each kind of form, see the [Reactive Forms](guide/reactive-forms) and [Template-driven Forms](guide/forms) guides.
 
 </div>
 
@@ -30,7 +30,7 @@ The table below summarizes the key differences between reactive and template-dri
 
 ||Reactive|Template-driven|
 |--- |--- |--- |
-|Setup (form model)|More explicit, created in component class|Less explicit, created by directives|
+|Setup (form model)|More explicit, created in the component class.|Less explicit, created by the directives.|
 |Data model|Structured|Unstructured|
 |Predictability|Synchronous|Asynchronous|
 |Form validation|Functions|Directives|
@@ -41,41 +41,35 @@ The table below summarizes the key differences between reactive and template-dri
 
 Both reactive and template-driven forms share underlying building blocks. 
 
+- A `FormControl` instance that tracks the value and validation status of an individual form control.
+- A `FormGroup` instance that tracks the same values and status for a collection of form controls.
+- A `FormArray` instance that tracks the same values and status for an array of form controls.
+- A `ControlValueAccessor` that creates a bridge between Angular `FormControl` instances and native DOM elements.
 
-* `FormControl` tracks the value and validation status of an individual form control.
+How these control instances are created and managed with reactive and template-driven forms is introduced in the [form model setup](#setup-the-form-model) section below and detailed further in the [data flow section](#data-flow-in-forms) of this guide.
 
-* `FormGroup` tracks the same values and status for a collection of form controls.
+## Setup: The form model
 
-* `FormArray` tracks the same values and status for an array of form controls.
-
-* `ControlValueAccessor` creates a bridge between Angular `FormControl` instances and native DOM elements.
-
-See the [Form model setup](#setup-the-form-model) section below for an introduction to how these control instances are created and managed with reactive and template-driven forms. Further details are provided in the [data flow section](#data-flow-in-forms) of this guide.
-
-{@a setup-the-form-model}
-
-## Form model setup
-
-Reactive and template-driven forms both use a form model to track value changes between Angular forms and form input elements. The examples below show how the form model is defined and created.
+Reactive and template-driven forms both use a form model to track value changes between Angular forms and form input elements.  The examples below show how the form model is defined and created.
 
 ### Setup in reactive forms
 
-Here's a component with an input field for a single control implemented using reactive forms.
+Here is a component with an input field for a single control implemented using reactive forms.
 
 <code-example path="forms-overview/src/app/reactive/favorite-color/favorite-color.component.ts">
 </code-example>
 
-The source of truth provides the value and status of the form element at a given point in time. In reactive forms, the form model is the source of truth. In the example above, the form model is the `FormControl` instance.
+The source of truth provides the value and status of the form element at a given point in time. In reactive forms, the form model is source of truth. The form model in the above example is the `FormControl` instance.
 
 <figure>
   <img src="generated/images/guide/forms-overview/key-diff-reactive-forms.png" alt="Reactive forms key differences">
 </figure>
 
-With reactive forms, the form model is explicitly defined in the component class. The reactive form directive (in this case, `FormControlDirective`) then links the existing `FormControl` instance to a specific form element in the view using a value accessor (`ControlValueAccessor` instance). 
+With reactive forms, the form model is explicitly defined in the component class. The reactive form directive (in this case, `FormControlDirective`) then links the existing form control instance to a specific form element in the view using a value accessor (instance of `ControlValueAccessor`). 
 
 ### Setup in template-driven forms
 
-Here's the same component with an input field for a single control implemented using template-driven forms.
+Here is the same component with an input field for a single control implemented using template-driven forms.
 
 <code-example path="forms-overview/src/app/template/favorite-color/favorite-color.component.ts">
 </code-example>
@@ -86,25 +80,23 @@ In template-driven forms, the source of truth is the template.
   <img src="generated/images/guide/forms-overview/key-diff-td-forms.png" alt="Template-driven forms key differences">
 </figure>
 
-The abstraction of the form model promotes simplicity over structure. The template-driven form directive `NgModel` is responsible for creating and managing the `FormControl` instance for a given form element. It's less explicit, but you no longer have direct control over the form model. 
-
-{@a data-flow-in-forms}
+The abstraction of the form model promotes simplicity over structure. The template-driven form directive `NgModel` is responsible for creating and managing the form control instance for a given form element. It is less explicit, but you no longer have direct control over the form model. 
 
 ## Data flow in forms
 
-When building forms in Angular, it's important to understand how the framework handles data flowing from the user or from programmatic changes. Reactive and template-driven forms follow two different strategies when handling form input. The data flow examples below begin with the favorite color input field example from above, and then show how changes to favorite color are handled in reactive forms compared to template-driven forms.
+When building forms in Angular, it's important to understand how the framework handles data flowing from the user or from programmatic changes. Reactive and template-driven forms follow two different strategies when handling form input. The data flow examples below begin with the favorite color input field example from above, and they show how changes to favorite color are handled in reactive forms compared to template-driven forms.
 
 ### Data flow in reactive forms
 
-As described above, in reactive forms each form element in the view is directly linked to a form model (`FormControl` instance). Updates from the view to the model and from the model to the view are synchronous and aren't dependent on the UI rendered. The diagrams below use the same favorite color example to demonstrate how data flows when an input field's value is changed from the view and then from the model.
+As described above, in reactive forms each form element in the view is directly linked to a form model (`FormControl` instance). Updates from the view to model and model to view are synchronous and not dependent on the UI rendered. The diagrams below use the same favorite color example to demonstrate how data flows when an input field's value is changed from the view and then from the model.
 
 <figure>
   <img src="generated/images/guide/forms-overview/dataflow-reactive-forms-vtm.png" alt="Reactive forms data flow - view to model" width="100%">
 </figure>
 
-The steps below outline the data flow from view to model.
+The steps below outline the view to model data flow.
 
-1. The user types a value into the input element, in this case the favorite color *Blue*.
+1. The end user types a value into the input element, in this case the favorite color "Blue".
 1. The form input element emits an "input" event with the latest value.
 1. The control value accessor listening for events on the form input element immediately relays the new value to the `FormControl` instance.
 1. The `FormControl` instance emits the new value through the `valueChanges` observable.
@@ -114,37 +106,37 @@ The steps below outline the data flow from view to model.
   <img src="generated/images/guide/forms-overview/dataflow-reactive-forms-mtv.png" alt="Reactive forms data flow - model to view" width="100%">
 </figure>
 
-The steps below outline the data flow from model to view.
+The steps below outline the model to view data flow.
 
-1. The user calls the `favoriteColorControl.setValue()` method, which updates the `FormControl` value.
+1. The `favoriteColorControl.setValue()` method is called, which updates the `FormControl` value.
 1. The `FormControl` instance emits the new value through the `valueChanges` observable.
 1. Any subscribers to the `valueChanges` observable receive the new value.
 1. The control value accessor on the form input element updates the element with the new value.
 
 ### Data flow in template-driven forms
 
-In template-driven forms, each form element is linked to a directive that manages the form model internally. The diagrams below use the same favorite color example to demonstrate how data flows when an input field's value is changed from the view and then from the model.
+In template-driven forms, each form element is linked to a directive that manages the form model internally. The diagrams below uses the same favorite color example to demonstrate how data flows when an input field's value is changed from the view and then from the model.
 
 <figure>
-  <img src="generated/images/guide/forms-overview/dataflow-td-forms-vtm.png" alt="Template-driven forms data flow - view to model" width="100%">
+  <img src="generated/images/guide/forms-overview/dataflow-td-forms-vtm.png" alt="Template-driven forms view to model data flow" width="100%">
 </figure>
 
-The steps below outline the data flow from view to model when the input value changes from *Red* to *Blue*.
+The steps below outline the view to model data flow.
 
-1. The user types *Blue* into the input element.
-1. The input element emits an "input" event with the value *Blue*.
+1. The end user types "Blue" into the input element.
+1. The input element emits an "input" event with the value "Blue".
 1. The control value accessor attached to the input triggers the `setValue()` method on the `FormControl` instance.
 1. The `FormControl` instance emits the new value through the `valueChanges` observable.
 1. Any subscribers to the `valueChanges` observable receive the new value.
-1. The control value accessor also calls the `NgModel.viewToModelUpdate()` method which emits an `ngModelChange` event.
-1. Because the component template uses two-way data binding for the `favoriteColor` property, the `favoriteColor` property in the component 
-is updated to the value emitted  by the `ngModelChange` event (*Blue*).
+1. The control value accessor also calls the `NgModel.viewToModel()` method which emits an `ngModelChange` event.
+1. Because the component template uses two-way data binding for the `favoriteColor`, the `favoriteColor` property in the component 
+is updated to the value emitted  by the `ngModelChange` event ("Blue").
 
 <figure>
-  <img src="generated/images/guide/forms-overview/dataflow-td-forms-mtv.png" alt="Template-driven forms data flow - model to view" width="100%">
+  <img src="generated/images/guide/forms-overview/dataflow-td-forms-mtv.png" alt="Template-driven forms model to view data flow" width="100%">
 </figure>
 
-The steps below outline the data flow from model to view when the `favoriteColor` changes from *Blue* to *Red*.
+The steps below outline the model to view data flow.
 
 1. The `favoriteColor` value is updated in the component.
 1. Change detection begins.
@@ -158,117 +150,110 @@ The steps below outline the data flow from model to view when the `favoriteColor
 
 ## Form validation
 
-Validation is an integral part of managing any set of forms. Whether you're checking for required fields or querying an external API for an existing username, Angular provides a set of built-in validators as well as the ability to create custom validators.
+Validation is an integral part of managing any set of forms. Whether you’re checking for required fields or querying an external API for an existing username, Angular provides a set of built-in validators as well as the ability to create custom validators.
 
 * **Reactive forms** define custom validators as **functions** that receive a control to validate.
 * **Template-driven forms** are tied to template **directives**, and must provide custom validator directives that wrap validation functions.
 
-For more information, see [Form Validation](guide/form-validation).
+For more on form validation, see the [Form Validation](guide/form-validation) guide.
 
 ## Testing 
 
-Testing plays a large part in complex applications and a simpler testing strategy is useful when validating that your forms function correctly. Reactive forms and template-driven forms have different levels of reliance on rendering the UI to perform assertions based on form control and form field changes. The following examples demonstrate the process of testing forms with reactive and template-driven forms.
+Testing also plays a large part in complex applications and an easier testing strategy is always welcomed. One difference in testing reactive forms and template-driven forms is their reliance on rendering the UI in order to perform assertions based on form control and form field changes. The following examples demonstrate the process of testing forms with reactive and template-driven forms.
 
 ### Testing reactive forms
 
-Reactive forms provide a relatively easy testing strategy because they provide synchronous access to the form and data models, and they can be tested without rendering the UI. In these tests, status and data are queried and manipulated through the control without interacting with the change detection cycle.
+Reactive forms provide a relatively easy testing strategy because they provide synchronous access to the form and data models, and they can be tested without rendering the UI. In these set of tests, controls and data are queried and manipulated through the control without interacting with the change detection cycle.
 
-The following tests use the favorite color components mentioned earlier to verify the data flows from view to model and model to view for a reactive form.
+The following tests use the favorite color components mentioned earlier to verify the view to model and model to view data flows for a reactive form.
 
-The following test verifies the data flow from view to model.
+The following test verifies the view to model data flow:
 
-<code-example path="forms-overview/src/app/reactive/favorite-color/favorite-color.component.spec.ts" region="view-to-model" header="Favorite color test - view to model">
+<code-example path="forms-overview/src/app/reactive/favorite-color/favorite-color.component.spec.ts" region="view-to-model" title="Favorite color test - view to model">
 </code-example>
 
-Here are the steps performed in the view to model test.
+The steps performed in the view to model test.
 
 1. Query the view for the form input element, and create a custom "input" event for the test.
-1. Set the new value for the input to *Red*, and dispatch the "input" event on the form input element.
-1. Assert that the component's `favoriteColorControl` value matches the value from the input.
+1. Set the new value for the input is set to *Red*, and dispatch the "input" event on the form input element.
+1. Assert that the `favoriteColor` `FormControl` instance value matches the value from the input.
 
-The following test verifies the data flow from model to view.
+The following test verifies the model to view data flow:
 
-<code-example path="forms-overview/src/app/reactive/favorite-color/favorite-color.component.spec.ts" region="model-to-view" header="Favorite color test - model to view">
+<code-example path="forms-overview/src/app/reactive/favorite-color/favorite-color.component.spec.ts" region="model-to-view" title="Favorite color test - model to view">
 </code-example>
 
-Here are the steps performed in the model to view test.
+The steps performed in the model to view test.
 
-1. Use the `favoriteColorControl`, a `FormControl` instance, to set the new value.
+1. Use the `favoriteColor` `FormControl` instance to set the new value.
 1. Query the view for the form input element.
 1. Assert that the new value set on the control matches the value in the input.
 
 ### Testing template-driven forms
 
-Writing tests with template-driven forms requires a detailed knowledge of the change detection process and an understanding of how directives run on each cycle to ensure that elements are queried, tested, or changed at the correct time.
+Writing tests with template-driven forms requires more detailed knowledge of the change detection process and how directives run on each cycle to ensure elements are queried, tested, or changed at the correct time.
 
-The following tests use the favorite color components mentioned earlier to verify the data flows from view to model and model to view for a template-driven form.
+The following tests use the favorite color components mentioned earlier to verify the view to model and model to view data flows for a template-driven form.
 
-The following test verifies the data flow from view to model.
+The following test verifies the view to model data flow:
 
-<code-example path="forms-overview/src/app/template/favorite-color/favorite-color.component.spec.ts" region="view-to-model" header="Favorite color test - view to model">
+<code-example path="forms-overview/src/app/template/favorite-color/favorite-color.component.spec.ts" region="view-to-model" title="Favorite color test - view to model">
 </code-example>
 
-Here are the steps performed in the view to model test.
+The steps performed in the view to model test.
 
 1. Query the view for the form input element, and create a custom "input" event for the test.
-1. Set the new value for the input to *Red*, and dispatch the "input" event on the form input element.
+1. Set the new value for the input is set to *Red*, and dispatch the "input" event on the form input element.
 1. Run change detection through the test fixture.
 1. Assert that the component `favoriteColor` property value matches the value from the input.
 
-The following test verifies the data flow from model to view.
+The following test verifies the model to view data flow:
 
-<code-example path="forms-overview/src/app/template/favorite-color/favorite-color.component.spec.ts" region="model-to-view" header="Favorite color test - model to view">
+<code-example path="forms-overview/src/app/template/favorite-color/favorite-color.component.spec.ts" region="model-to-view" title="Favorite color test - model to view">
 </code-example>
 
-Here are the steps performed in the model to view test.
+The steps performed in the model to view test.
 
-1. Use the component instance to set the value of the `favoriteColor` property.
+1. Use the component instance to set the value of `favoriteColor` property.
 1. Run change detection through the test fixture.
-1. Use the `tick()` method to simulate the passage of time within the `fakeAsync()` task.
+1. Use the `tick()` method to simulate passage of time within the `fakeAsync()` task.
 1. Query the view for the form input element.
-1. Assert that the input value matches the value of the `favoriteColor` property in the component instance.
+1. Assert that the input value matches the `favoriteColor` value property in the component instance.
 
 ## Mutability
 
-The change tracking method plays a role in the efficiency of your application.
+How changes are tracked plays a role in the efficiency of your application.
 
-
-* **Reactive forms** keep the data model pure by providing it as an immutable data structure. Each time a change is triggered on the data model, the `FormControl` instance returns a new data model rather than updating the existing data model. This gives you the ability to track unique changes to the data model through the control's observable. This provides one way for change detection to be more efficient because it only needs to update on unique changes. It also follows reactive patterns that integrate with observable operators to transform data.
-
-* **Template-driven** forms rely on mutability with two-way data binding to update the data model in the component as changes are made in the template. Because there are no unique changes to track on the data model when using two-way data binding, change detection is less efficient at determining when updates are required.
+- **Reactive forms** keep the data model pure by providing it as an immutable data structure. Each time a change is triggered on the data model, the `FormControl` instance returns a new data model rather than updating the data model directly. This gives you the ability track unique changes to the data model through the control's observable. This allows change detection to be more efficient because it only needs to update on unique changes. It also follows reactive patterns that integrate with observable operators to transform data.
+- **Template-driven** forms rely on mutability with two-way data binding to update the data model in the component as changes are made in the template. Because there are no unique changes to track on the data model when using two-way data binding, change detection is less efficient at determining when updates are required.
 
 The difference is demonstrated in the examples above using the **favorite color** input element. 
 
-
-* With reactive forms, the **`FormControl` instance** always returns a new value when the control's value is updated.
-
-* With template-driven forms, the **favorite color property** is always modified to its new value.
+- With reactive forms, the **`FormControl` instance** always returns a new value when the control's value is updated.
+- With template-driven forms, the **favorite color property** is always modified to its new value.
 
 ## Scalability
 
 If forms are a central part of your application, scalability is very important. Being able to reuse form models across components is critical.
 
+- **Reactive forms** make creating large scale forms easier by providing access to low-level APIs and synchronous access to the form model.
+- **Template-driven** forms focus on simple scenarios, are not as reusable, abstract away the low-level APIs and access to the form model is  provided asynchronously. The abstraction with template-driven forms surfaces in testing also, where testing reactive forms requires less setup and no dependence on the change detection cycle when updating and validating the form and data models during testing.
 
-* **Reactive forms** provide access to low-level APIs and synchronous access to the form model, making creating large-scale forms easier.
+## Final Thoughts
 
-* **Template-driven** forms focus on simple scenarios, are not as reusable, abstract away the low-level APIs, and provide asynchronous access to the form model. The abstraction with template-driven forms also surfaces in testing, where testing reactive forms requires less setup and no dependence on the change detection cycle when updating and validating the form and data models during testing.
-
-## Final thoughts
-
-Choosing a strategy begins with understanding the strengths and weaknesses of the options presented. Low-level API and form model access, predictability, mutability, straightforward validation and testing strategies, and scalability are all important considerations in choosing the infrastructure you use to build your forms in Angular. Template-driven forms are similar to patterns in AngularJS, but they have limitations given the criteria of many modern, large-scale Angular apps. Reactive forms minimize these limitations. Reactive forms integrate with reactive patterns already present in other areas of the Angular architecture, and complement those requirements well. 
-
-## Next steps
+Choosing a strategy begins with understanding the strengths and weaknesses of the options presented. Low-level API and form model access, predictability, mutability, straightforward validation and testing strategies, and scalability are all important consideration in choosing the infrastructure you use when building your forms in Angular. Template-driven forms are similar to patterns in AngularJS, but they have limitations given the criteria of many modern, large-scale Angular apps. Reactive forms integrate with reactive patterns already present in other areas of the Angular architecture, and complement those requirements well. Those limitations are alleviated with reactive forms.
 
+## Next Steps
 
+The following guides are the next steps in the learning process.
 
 To learn more about reactive forms, see the following guides:
 
 * [Reactive Forms](guide/reactive-forms)
 * [Form Validation](guide/form-validation#reactive-form-validation)
-* [Dynamic Forms](guide/dynamic-form)
+* [Dynamic forms](guide/dynamic-form)
 
 To learn more about template-driven forms, see the following guides:
 
-* [Template-driven Forms](guide/forms#template-driven-forms)
+* [Template-driven Forms](guide/forms)
 * [Form Validation](guide/form-validation#template-driven-validation)
-

aio/content/guide/forms.md

@@ -1,4 +1,4 @@
-# Template-driven forms
+# Forms
 
 Forms are the mainstay of business applications.
 You use forms to log in, submit a help request, place an order, book a flight,
@@ -7,8 +7,6 @@ schedule a meeting, and perform countless other data-entry tasks.
 In developing a form, it's important to create a data-entry experience that guides the
 user efficiently and effectively through the workflow.
 
-## Introduction to Template-driven forms
-
 Developing forms requires design skills (which are out of scope for this page), as well as framework support for
 *two-way data binding, change tracking, validation, and error handling*,
 which you'll learn about on this page.
@@ -26,6 +24,8 @@ You can run the <live-example></live-example> in Stackblitz and download the cod
 
 {@a template-driven}
 
+## Template-driven forms
+
 You can build forms by writing templates in the Angular [template syntax](guide/template-syntax) with
 the form-specific directives and techniques described in this page.
 
@@ -99,7 +99,7 @@ A model can be as simple as a "property bag" that holds facts about a thing of a
 That describes well the `Hero` class with its three required fields (`id`, `name`, `power`)
 and one optional field (`alterEgo`).
 
-Using the Angular CLI command [`ng generate class`](cli/generate), generate a new class named `Hero`:
+Using the Angular CLI, generate a new class named `Hero`:
 
 <code-example language="sh" class="code-shell">
 
@@ -109,7 +109,7 @@ Using the Angular CLI command [`ng generate class`](cli/generate), generate a ne
 
 With this content:
 
-<code-example path="forms/src/app/hero.ts" header="src/app/hero.ts">
+<code-example path="forms/src/app/hero.ts" title="src/app/hero.ts">
 
 </code-example>
 
@@ -132,7 +132,7 @@ An Angular form has two parts: an HTML-based _template_ and a component _class_
 to handle data and user interactions programmatically.
 Begin with the class because it states, in brief, what the hero editor can do.
 
-Using the Angular CLI command [`ng generate component`](cli/generate), generate a new component named `HeroForm`:
+Using the Angular CLI, generate a new component named `HeroForm`:
 
 <code-example language="sh" class="code-shell">
 
@@ -142,7 +142,7 @@ Using the Angular CLI command [`ng generate component`](cli/generate), generate
 
 With this content:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.ts" linenums="false" header="src/app/hero-form/hero-form.component.ts (v1)" region="v1">
+<code-example path="forms/src/app/hero-form/hero-form.component.ts" linenums="false" title="src/app/hero-form/hero-form.component.ts (v1)" region="v1">
 
 </code-example>
 
@@ -176,7 +176,7 @@ Because template-driven forms are in their own module, you need to add the `Form
 
 Update it with the following:
 
-<code-example path="forms/src/app/app.module.ts" header="src/app/app.module.ts">
+<code-example path="forms/src/app/app.module.ts" title="src/app/app.module.ts">
 
 </code-example>
 
@@ -204,7 +204,7 @@ Update it with the following:
 
 Replace the contents of its template with the following:
 
-<code-example path="forms/src/app/app.component.html" header="src/app/app.component.html">
+<code-example path="forms/src/app/app.component.html" title="src/app/app.component.html">
 
 </code-example>
 
@@ -221,7 +221,7 @@ Replace the contents of its template with the following:
 
 Update the template file with the following contents:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" region="start" header="src/app/hero-form/hero-form.component.html">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" region="start" title="src/app/hero-form/hero-form.component.html">
 
 </code-example>
 
@@ -259,7 +259,7 @@ Bootstrap gives the form a little style.
 
 To add the stylesheet, open `styles.css` and add the following import line at the top:
 
-<code-example path="forms/src/styles.1.css" linenums="false" header="src/styles.css">
+<code-example path="forms/src/styles.1.css" linenums="false" title="src/styles.css">
 
 </code-example>
 
@@ -274,7 +274,7 @@ a technique seen previously in the [Displaying Data](guide/displaying-data) page
 
 Add the following HTML *immediately below* the *Alter Ego* group:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (powers)" region="powers">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (powers)" region="powers">
 
 </code-example>
 
@@ -307,7 +307,7 @@ makes binding the form to the model easy.
 
 Find the `<input>` tag for *Name* and update it like this:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (excerpt)" region="ngModelName-1">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (excerpt)" region="ngModelName-1">
 
 </code-example>
 
@@ -325,7 +325,7 @@ You need one more addition to display the data. Declare
 a template variable for the form. Update the `<form>` tag with
 `#heroForm="ngForm"` as follows:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (excerpt)" region="template-variable">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (excerpt)" region="template-variable">
 
 </code-example>
 
@@ -391,7 +391,7 @@ Then you can confirm that two-way data binding works *for the entire hero model*
 
 After revision, the core of the form should look like this:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (excerpt)" region="ngModel-2">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (excerpt)" region="ngModel-2">
 
 </code-example>
 
@@ -493,7 +493,7 @@ You can leverage those class names to change the appearance of the control.
 Temporarily add a [template reference variable](guide/template-syntax#ref-vars) named `spy`
 to the _Name_ `<input>` tag and use it to display the input's CSS classes.
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (excerpt)" region="ngModelName-2">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (excerpt)" region="ngModelName-2">
 
 </code-example>
 
@@ -535,13 +535,13 @@ on the left of the input box:
 You achieve this effect by adding these class definitions to a new `forms.css` file
 that you add to the project as a sibling to `index.html`:
 
-<code-example path="forms/src/assets/forms.css" header="src/assets/forms.css">
+<code-example path="forms/src/assets/forms.css" title="src/assets/forms.css">
 
 </code-example>
 
 Update the `<head>` of `index.html` to include this style sheet:
 
-<code-example path="forms/src/index.html" linenums="false" header="src/index.html (styles)" region="styles">
+<code-example path="forms/src/index.html" linenums="false" title="src/index.html (styles)" region="styles">
 
 </code-example>
 
@@ -564,7 +564,7 @@ To achieve this effect, extend the `<input>` tag with the following:
 
 Here's an example of an error message added to the _name_ input box:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (excerpt)" region="name-with-error-msg">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (excerpt)" region="name-with-error-msg">
 
 </code-example>
 
@@ -583,7 +583,7 @@ Here you created a variable called `name` and gave it the value "ngModel".
 You control visibility of the name error message by binding properties of the `name`
 control to the message `<div>` element's `hidden` property.
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (hidden-error-msg)" region="hidden-error-msg">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (hidden-error-msg)" region="hidden-error-msg">
 
 </code-example>
 
@@ -609,11 +609,11 @@ power to valid values.
 Now you'll add a new hero in this form.
 Place a *New Hero* button at the bottom of the form and bind its click event to a `newHero` component method.
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" region="new-hero-button-no-reset" header="src/app/hero-form/hero-form.component.html (New Hero button)">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" region="new-hero-button-no-reset" title="src/app/hero-form/hero-form.component.html (New Hero button)">
 
 </code-example>
 
-<code-example path="forms/src/app/hero-form/hero-form.component.ts" region="new-hero" header="src/app/hero-form/hero-form.component.ts (New Hero method)" linenums="false">
+<code-example path="forms/src/app/hero-form/hero-form.component.ts" region="new-hero" title="src/app/hero-form/hero-form.component.ts (New Hero method)" linenums="false">
 
 </code-example>
 
@@ -634,7 +634,7 @@ Replacing the hero object *did not restore the pristine state* of the form contr
 You have to clear all of the flags imperatively, which you can do
 by calling the form's `reset()` method after calling the `newHero()` method.
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" region="new-hero-button-form-reset" header="src/app/hero-form/hero-form.component.html (Reset the form)">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" region="new-hero-button-form-reset" title="src/app/hero-form/hero-form.component.html (Reset the form)">
 
 </code-example>
 
@@ -651,7 +651,7 @@ A "form submit" is useless at the moment.
 To make it useful, bind the form's `ngSubmit` event property
 to the hero form component's `onSubmit()` method:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (ngSubmit)" region="ngSubmit">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (ngSubmit)" region="ngSubmit">
 
 </code-example>
 
@@ -664,7 +664,7 @@ You'll bind the form's overall validity via
 the `heroForm` variable to the button's `disabled` property
 using an event binding. Here's the code:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (submit-button)" region="submit-button">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (submit-button)" region="submit-button">
 
 </code-example>
 
@@ -703,7 +703,7 @@ hide the data entry area and display something else.
 Wrap the form in a `<div>` and bind
 its `hidden` property to the `HeroFormComponent.submitted` property.
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (excerpt)" region="edit-div">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (excerpt)" region="edit-div">
 
 </code-example>
 
@@ -711,7 +711,7 @@ The main form is visible from the start because the
 `submitted` property is false until you submit the form,
 as this fragment from the `HeroFormComponent` shows:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.ts" linenums="false" header="src/app/hero-form/hero-form.component.ts (submitted)" region="submitted">
+<code-example path="forms/src/app/hero-form/hero-form.component.ts" linenums="false" title="src/app/hero-form/hero-form.component.ts (submitted)" region="submitted">
 
 </code-example>
 
@@ -721,7 +721,7 @@ as planned.
 Now the app needs to show something else while the form is in the submitted state.
 Add the following HTML below the `<div>` wrapper you just wrote:
 
-<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" header="src/app/hero-form/hero-form.component.html (excerpt)" region="submitted">
+<code-example path="forms/src/app/hero-form/hero-form.component.html" linenums="false" title="src/app/hero-form/hero-form.component.html (excerpt)" region="submitted">
 
 </code-example>
 
@@ -752,35 +752,35 @@ Here’s the code for the final version of the application:
 
 <code-tabs>
 
-  <code-pane header="hero-form/hero-form.component.ts" path="forms/src/app/hero-form/hero-form.component.ts" region="final">
+  <code-pane title="hero-form/hero-form.component.ts" path="forms/src/app/hero-form/hero-form.component.ts" region="final">
 
   </code-pane>
 
-  <code-pane header="hero-form/hero-form.component.html" path="forms/src/app/hero-form/hero-form.component.html" region="final">
+  <code-pane title="hero-form/hero-form.component.html" path="forms/src/app/hero-form/hero-form.component.html" region="final">
 
   </code-pane>
 
-  <code-pane header="hero.ts" path="forms/src/app/hero.ts">
+  <code-pane title="hero.ts" path="forms/src/app/hero.ts">
 
   </code-pane>
 
-  <code-pane header="app.module.ts" path="forms/src/app/app.module.ts">
+  <code-pane title="app.module.ts" path="forms/src/app/app.module.ts">
 
   </code-pane>
 
-  <code-pane header="app.component.html" path="forms/src/app/app.component.html">
+  <code-pane title="app.component.html" path="forms/src/app/app.component.html">
 
   </code-pane>
 
-  <code-pane header="app.component.ts" path="forms/src/app/app.component.ts">
+  <code-pane title="app.component.ts" path="forms/src/app/app.component.ts">
 
   </code-pane>
 
-  <code-pane header="main.ts" path="forms/src/main.ts">
+  <code-pane title="main.ts" path="forms/src/main.ts">
 
   </code-pane>
 
-  <code-pane header="forms.css" path="forms/src/assets/forms.css">
+  <code-pane title="forms.css" path="forms/src/assets/forms.css">
 
   </code-pane>
 

aio/content/guide/frequent-ngmodules.md

@@ -71,7 +71,7 @@ of some of the things they contain:
 
 When you use these Angular modules, import them in `AppModule`,
 or your feature module as appropriate, and list them in the `@NgModule`
-`imports` array. For example, in the basic app generated by the [Angular CLI](cli),
+`imports` array. For example, in the basic app generated by the CLI,
 `BrowserModule` is the first import at the top of the `AppModule`,
 `app.module.ts`.
 

aio/content/guide/glossary.md

@@ -130,10 +130,10 @@ A [decorator](guide/glossary#decorator) statement immediately before a field in
 
 ## command-line interface (CLI)
 
-The [Angular CLI](cli) is a command-line tool for managing the Angular development cycle. Use it to create the initial filesystem scaffolding for a [workspace](guide/glossary#workspace) or [project](guide/glossary#project), and to run [schematics](guide/glossary#schematic) that add and modify code for initial generic versions of various elements. The CLI supports all stages of the development cycle, including building, testing, bundling, and deployment.
+The [Angular CLI](https://cli.angular.io/) is a command-line tool for managing the Angular development cycle. Use it to create the initial filesystem scaffolding for a [workspace](guide/glossary#workspace) or [project](guide/glossary#project), and to run [schematics](guide/glossary#schematic) that add and modify code for initial generic versions of various elements. The CLI supports all stages of the development cycle, including building, testing, bundling, and deployment.
 
 * To begin using the CLI for a new project, see [Getting Started](guide/quickstart).
-* To learn more about the full capabilities of the CLI, see the [CLI command reference](cli).
+* To learn more about the full capabilities of the CLI, see the [Angular CLI documentation](https://github.com/angular/angular-cli/wiki).
 
 {@a component}
 
@@ -317,30 +317,6 @@ Within Angular, use [NgModules](guide/glossary#ngmodule) to make public parts av
 
 {@a F}
 
-{@a form-control}
-
-## form control
-
-A instance of `FormControl`, which is a fundamental building block for Angular forms. Together with `FormGroup` and `FormArray`, tracks the value, validation, and status of a form input element.
-
-Read more forms in the [Introduction to forms in Angular](guide/forms-overview).
-
-{@a form-model}
-
-## form model
-
-The "source of truth" for the value and validation status of a form input element at a given point in time. When using [reactive forms](guide/glossary#reactive-forms), the form model is created explicitly in the component class. When using [template-driven forms](guide/glossary#template-driven-forms), the form model is implicitly created by directives.
-
-Learn more about reactive and template-driven forms in the [Introduction to forms in Angular](guide/forms-overview).
-
-{@a form-validation}
-
-## form validation
-
-A check that runs when form values change and reports whether the given values are correct and complete, according to the defined constraints. Reactive forms apply [validator functions](guide/form-validation#adding-to-reactive-forms). Template-driven forms use [validator directives](guide/form-validation#adding-to-template-driven-forms).
-
-
-To learn more, see [Form Validation](guide/form-validation).
 
 {@a G}
 
@@ -349,14 +325,6 @@ To learn more, see [Form Validation](guide/form-validation).
 
 {@a I}
 
-
-{@a immutability}
-
-## immutability
-
-The ability to alter the state of a value after its creation. [Reactive forms](guide/glossary#reactive-forms) perform immutable changes in that
-each change to the data model produces a new data model rather than modifying the existing one. [Template-driven forms](guide/glossary#template-driven-forms) perform mutable changes with `NgModel` and [two-way data binding](guide/glossary#data-binding) to modify the existing data model in place.
-
 {@a injectable}
 
 ## injectable
@@ -607,15 +575,14 @@ Learn more in [Dependency Injection](guide/dependency-injection).
 A framework for building Angular forms through code in a component.
 The alternative is a [template-driven form](guide/glossary#template-driven-forms).
 
-When using reactive forms:
+When building reactive forms:
 
-* The "source of truth", the form model, is defined in the component class.
-* Validation is set up through validation functions rather than valdation directives.
-* Each control is explicitly created in the component class by creating a `FormControl` instance manually or with `FormBuilder`.
+* The "source of truth" is the component. The validation is defined using code in the component.
+* Each control is explicitly created in the component class with `new FormControl()` or with `FormBuilder`.
 * The template input elements do *not* use `ngModel`.
-* The associated Angular directives are prefixed with `form`, such as `formControl`, `formGroup`, and `formControlName`.
+* The associated Angular directives are prefixed with `Form`, such as `FormGroup()`, `FormControl()`, and `FormControlName()`.
 
-The alternative is a template-driven form. For an introduction and comparison of both forms approaches, see [Introduction to Angular Forms](guide/forms-overview).
+Reactive forms are powerful, flexible, and a good choice for more complex data-entry form scenarios, such as dynamic generation of form controls.
 
 {@a router}
 {@a router-module}
@@ -654,7 +621,8 @@ For more information, see [Routing and Navigation](guide/router).
 A scaffolding library that defines how to generate or transform a programming project by creating, modifying, refactoring, or moving files and code. 
 The Angular [CLI](guide/glossary#cli) uses schematics to generate and modify [Angular projects](guide/glossary#project) and parts of projects.
 
-* Angular provides a set of schematics for use with the CLI. See the [Angular CLI command reference](cli). The [`ng add`](cli/add) command runs schematics as part of adding a library to your project. The [`ng generate`](cli/generate) command runs schematics to create apps, libraries, and Angular code constructs. 
+* Angular provides a set of schematics for use with the CLI. 
+For details, see [Angular CLI documentation](https://github.com/angular/angular-cli/wiki).
 
 * Library developers can create schematics that enable the CLI to generate their published libraries.
 For more information, see [devkit documentation](https://www.npmjs.com/package/@angular-devkit/schematics). 
@@ -668,7 +636,7 @@ NgModules are delivered within scoped packages whose names begin with the Angula
 
 Import a scoped package in the same way that you import a normal package. 
 
-<code-example path="architecture/src/app/app.component.ts" linenums="false" header="architecture/src/app/app.component.ts (import)" region="import">
+<code-example path="architecture/src/app/app.component.ts" linenums="false" title="architecture/src/app/app.component.ts (import)" region="import">
 
 </code-example>
 
@@ -730,14 +698,16 @@ Additional templates, represented by `TemplateRef` objects, can define alternati
 A format for building Angular forms using HTML forms and input elements in the view.
 The alternative format uses the [reactive forms](guide/glossary#reactive-forms) framework.
 
-When using template-driven forms:
+When building template-driven forms:
 
 * The "source of truth" is the template. The validation is defined using attributes on the individual input elements.
 * [Two-way binding](guide/glossary#data-binding) with `ngModel` keeps the component model synchronized with the user's entry into the input elements.
 * Behind the scenes, Angular creates a new control for each input element, provided you have set up a `name` attribute and two-way binding for each input.
 * The associated Angular directives are prefixed with `ng` such as `ngForm`, `ngModel`, and `ngModelGroup`.
 
-The alternative is a reactive form. For an introduction and comparison of both forms approaches, see [Introduction to Angular Forms](guide/forms-overview).
+Template-driven forms are convenient, quick, and simple. They are a good choice for many basic data-entry form scenarios.
+
+Read about how to build template-driven forms in [Forms](guide/forms).
 
 {@a template-expression}
 
@@ -815,7 +785,7 @@ See [custom element](guide/glossary#custom-element).
 ## workspace
 
 In Angular, a folder that contains [projects](guide/glossary#project) (that is, apps and libraries).
-The [CLI](guide/glossary#cli) `ng new` command creates a workspace to contain projects. 
+The [CLI](guide/glossary#cli) `new` command creates a workspace to contain projects. 
 Commands that create or operate on apps and libraries (such as `add` and `generate`) must be executed from within a workspace folder. 
 
 {@a X}

aio/content/guide/hierarchical-dependency-injection.md

@@ -23,9 +23,9 @@ When you specify providers in the `@Injectable()` decorator of the service itsel
 
 * Learn more about [tree-shakable providers](guide/dependency-injection-providers#tree-shakable-providers).
 
-You're likely to inject `UserService` in many places throughout the app and will want to inject the same service instance every time. Providing `UserService` through the `root` injector is a good choice, and is the default that the [Angular CLI](cli) uses when you generate a service for your app.
+You're likely to inject `UserService` in many places throughout the app and will want to inject the same service instance every time. Providing `UserService` through the `root` injector is a good choice, and is the default that the CLI uses when you generate a service for your app.
 
-<div class="alert is-helpful">
+<div class="alert-is-helpful">
 <header>Platform injector</header>
 
 When you use `providedIn:'root'`, you are configuring the root injector for the _app_, which is the injector for `AppModule`.
@@ -75,7 +75,7 @@ When an injectable class provides its own service to the `root` injector, the se
 
 The following example configures a provider for `HeroService` using the `@Injectable()` decorator on the class.
 
-<code-example path="dependency-injection/src/app/heroes/hero.service.0.ts"  header="src/app/heroes/heroes.service.ts" linenums="false"> </code-example> 
+<code-example path="dependency-injection/src/app/heroes/hero.service.0.ts"  title="src/app/heroes/heroes.service.ts" linenums="false"> </code-example> 
 
 This configuration tells Angular that the app's root injector is responsible for creating an 
 instance of `HeroService` by invoking its constructor,
@@ -92,7 +92,7 @@ Instead of specifying the `root` injector, you can set `providedIn` to a specifi
 For example, in the following excerpt, the `@Injectable()` decorator configures a provider
 that is available in any injector that includes the `HeroModule`.
 
-<code-example path="dependency-injection/src/app/heroes/hero.service.4.ts"  header="src/app/heroes/hero.service.ts" linenums="false"> </code-example>
+<code-example path="dependency-injection/src/app/heroes/hero.service.4.ts"  title="src/app/heroes/hero.service.ts" linenums="false"> </code-example>
 
 This is generally no different from configuring the injector of the NgModule itself,
 except that the service is tree-shakable if the NgModule doesn't use it.
@@ -117,7 +117,7 @@ Here is an example of the case where the component router configuration includes
 a non-default [location strategy](guide/router#location-strategy) by listing its provider
 in the `providers` list of the `AppModule`.
 
-<code-example path="dependency-injection-in-action/src/app/app.module.ts" region="providers" header="src/app/app.module.ts (providers)" linenums="false">
+<code-example path="dependency-injection-in-action/src/app/app.module.ts" region="providers" title="src/app/app.module.ts (providers)" linenums="false">
 
 </code-example>
 
@@ -132,7 +132,7 @@ by configuring the provider at the component level using the `@Component` metada
 
 The following example is a revised `HeroesComponent` that specifies `HeroService` in its `providers` array. `HeroService` can provide heroes to instances of this component, or to any child component instances. 
 
-<code-example path="dependency-injection/src/app/heroes/heroes.component.1.ts" header="src/app/heroes/heroes.component.ts" linenums="false">
+<code-example path="dependency-injection/src/app/heroes/heroes.component.1.ts" title="src/app/heroes/heroes.component.ts" linenums="false">
 </code-example>
 
 ### Element injectors
@@ -207,7 +207,7 @@ that would make the `VillainsService` available everywhere in the application, i
 Instead, you can provide the `VillainsService` in the `providers` metadata of the `VillainsListComponent` like this:
 
 
-<code-example path="hierarchical-dependency-injection/src/app/villains-list.component.ts" linenums="false" header="src/app/villains-list.component.ts (metadata)" region="metadata">
+<code-example path="hierarchical-dependency-injection/src/app/villains-list.component.ts" linenums="false" title="src/app/villains-list.component.ts (metadata)" region="metadata">
 
 </code-example>
 
@@ -250,14 +250,14 @@ It caches a single `HeroTaxReturn`, tracks changes to that return, and can save
 It also delegates to the application-wide singleton `HeroService`, which it gets by injection.
 
 
-<code-example path="hierarchical-dependency-injection/src/app/hero-tax-return.service.ts" header="src/app/hero-tax-return.service.ts">
+<code-example path="hierarchical-dependency-injection/src/app/hero-tax-return.service.ts" title="src/app/hero-tax-return.service.ts">
 
 </code-example>
 
 Here is the `HeroTaxReturnComponent` that makes use of it.
 
 
-<code-example path="hierarchical-dependency-injection/src/app/hero-tax-return.component.ts" header="src/app/hero-tax-return.component.ts">
+<code-example path="hierarchical-dependency-injection/src/app/hero-tax-return.component.ts" title="src/app/hero-tax-return.component.ts">
 
 </code-example>
 
@@ -273,7 +273,7 @@ Every component would share the same service instance, and each component would
 To prevent this, we configure the component-level injector of `HeroTaxReturnComponent` to provide the service, using the  `providers` property in the component metadata.
 
 
-<code-example path="hierarchical-dependency-injection/src/app/hero-tax-return.component.ts" linenums="false" header="src/app/hero-tax-return.component.ts (providers)" region="providers">
+<code-example path="hierarchical-dependency-injection/src/app/hero-tax-return.component.ts" linenums="false" title="src/app/hero-tax-return.component.ts (providers)" region="providers">
 
 </code-example>
 

aio/content/guide/http.md

@@ -28,7 +28,7 @@ Most apps do so in the root `AppModule`.
 <code-example 
   path="http/src/app/app.module.ts"
   region="sketch"
-  header="app/app.module.ts (excerpt)" linenums="false">
+  title="app/app.module.ts (excerpt)" linenums="false">
 </code-example>
 
 Having imported `HttpClientModule` into the `AppModule`, you can inject the `HttpClient`
@@ -37,7 +37,7 @@ into an application class as shown in the following `ConfigService` example.
 <code-example 
   path="http/src/app/config/config.service.ts"
   region="proto"
-  header="app/config/config.service.ts (excerpt)" linenums="false">
+  title="app/config/config.service.ts (excerpt)" linenums="false">
 </code-example>
 
 ## Getting JSON data
@@ -48,7 +48,7 @@ that specifies resource URLs.
 
 <code-example 
   path="http/src/assets/config.json"
-  header="assets/config.json" linenums="false">
+  title="assets/config.json" linenums="false">
 </code-example>
 
 The `ConfigService` fetches this file with a `get()` method on `HttpClient`.
@@ -56,7 +56,7 @@ The `ConfigService` fetches this file with a `get()` method on `HttpClient`.
 <code-example 
   path="http/src/app/config/config.service.ts"
   region="getConfig_1"
-  header="app/config/config.service.ts (getConfig v.1)" linenums="false">
+  title="app/config/config.service.ts (getConfig v.1)" linenums="false">
 </code-example>
 
 A component, such as `ConfigComponent`, injects the `ConfigService` and calls
@@ -65,7 +65,7 @@ the `getConfig` service method.
 <code-example 
   path="http/src/app/config/config.component.ts"
   region="v1"
-  header="app/config/config.component.ts (showConfig v.1)" linenums="false">
+  title="app/config/config.component.ts (showConfig v.1)" linenums="false">
 </code-example>
 
 Because the service method returns an `Observable` of configuration data,
@@ -116,7 +116,7 @@ Then, specify that interface as the `HttpClient.get()` call's type parameter in
 <code-example 
   path="http/src/app/config/config.service.ts"
   region="getConfig_2" 
-  header="app/config/config.service.ts (getConfig v.2)" linenums="false">
+  title="app/config/config.service.ts (getConfig v.2)" linenums="false">
 </code-example>
 
 The callback in the updated component method receives a typed data object, which is
@@ -125,7 +125,7 @@ easier and safer to consume:
 <code-example 
   path="http/src/app/config/config.component.ts"
   region="v2"
-  header="app/config/config.component.ts (showConfig v.2)" linenums="false">
+  title="app/config/config.component.ts (showConfig v.2)" linenums="false">
 </code-example>
 
 ### Reading the full response
@@ -146,7 +146,7 @@ The component's `showConfigResponse()` method displays the response headers as w
 <code-example 
   path="http/src/app/config/config.component.ts"
   region="showConfigResponse" 
-  header="app/config/config.component.ts (showConfigResponse)"
+  title="app/config/config.component.ts (showConfigResponse)"
   linenums="false">
 </code-example>
 
@@ -161,7 +161,7 @@ You _could_ handle in the component by adding a second callback to the `.subscri
 <code-example 
   path="http/src/app/config/config.component.ts"
   region="v3" 
-  header="app/config/config.component.ts (showConfig v.3 with error handling)"
+  title="app/config/config.component.ts (showConfig v.3 with error handling)"
   linenums="false">
 </code-example>
 
@@ -188,7 +188,7 @@ You might first devise an error handler like this one:
 <code-example 
   path="http/src/app/config/config.service.ts"
   region="handleError" 
-  header="app/config/config.service.ts (handleError)" linenums="false">
+  title="app/config/config.service.ts (handleError)" linenums="false">
 </code-example>
 
 Notice that this handler returns an RxJS [`ErrorObservable`](#rxjs) with a user-friendly error message.
@@ -201,7 +201,7 @@ and _pipe them through_ to the error handler.
 <code-example 
   path="http/src/app/config/config.service.ts"
   region="getConfig_3" 
-  header="app/config/config.service.ts (getConfig v.3 with error handler)" linenums="false">
+  title="app/config/config.service.ts (getConfig v.3 with error handler)" linenums="false">
 </code-example>
 
 ### `retry()`
@@ -218,7 +218,7 @@ _Pipe_ it onto the `HttpClient` method result just before the error handler.
 <code-example 
   path="http/src/app/config/config.service.ts"
   region="getConfig" 
-  header="app/config/config.service.ts (getConfig with retry)" linenums="false">
+  title="app/config/config.service.ts (getConfig with retry)" linenums="false">
 </code-example>
 
 {@a rxjs}
@@ -239,7 +239,7 @@ If you're following along with these code snippets, note that you must import th
 <code-example 
   path="http/src/app/config/config.service.ts"
   region="rxjs-imports" 
-  header="app/config/config.service.ts (RxJS imports)" linenums="false">
+  title="app/config/config.service.ts (RxJS imports)" linenums="false">
 </code-example>
 
 ## Requesting non-JSON data
@@ -252,7 +252,7 @@ as an `Observable<string>`.
 <code-example 
   path="http/src/app/downloader/downloader.service.ts"
   region="getTextFile" 
-  header="app/downloader/downloader.service.ts (getTextFile)" linenums="false">
+  title="app/downloader/downloader.service.ts (getTextFile)" linenums="false">
 </code-example>
 
 `HttpClient.get()` returns a string rather than the default JSON because of the `responseType` option.
@@ -264,7 +264,7 @@ A `download()` method in the `DownloaderComponent` initiates the request by subs
 <code-example 
   path="http/src/app/downloader/downloader.component.ts"
   region="download" 
-  header="app/downloader/downloader.component.ts (download)" linenums="false">
+  title="app/downloader/downloader.component.ts (download)" linenums="false">
 </code-example>
 
 ## Sending data to the server
@@ -289,7 +289,7 @@ to every `HttpClient` save method.
 <code-example 
   path="http/src/app/heroes/heroes.service.ts"
   region="http-options" 
-  header="app/heroes/heroes.service.ts (httpOptions)" linenums="false">
+  title="app/heroes/heroes.service.ts (httpOptions)" linenums="false">
 </code-example>
 
 ### Making a POST request
@@ -300,7 +300,7 @@ In the following example, the `HeroesService` posts when adding a hero to the da
 <code-example 
   path="http/src/app/heroes/heroes.service.ts"
   region="addHero" 
-  header="app/heroes/heroes.service.ts (addHero)" linenums="false">
+  title="app/heroes/heroes.service.ts (addHero)" linenums="false">
 </code-example>
 
 The `HttpClient.post()` method is similar to `get()` in that it has a type parameter
@@ -320,7 +320,7 @@ the `Observable` returned by this service method.
 <code-example 
   path="http/src/app/heroes/heroes.component.ts"
   region="add-hero-subscribe" 
-  header="app/heroes/heroes.component.ts (addHero)" linenums="false">
+  title="app/heroes/heroes.component.ts (addHero)" linenums="false">
 </code-example>
 
 When the server responds successfully with the newly added hero, the component adds
@@ -334,7 +334,7 @@ in the request URL.
 <code-example 
   path="http/src/app/heroes/heroes.service.ts"
   region="deleteHero" 
-  header="app/heroes/heroes.service.ts (deleteHero)" linenums="false">
+  title="app/heroes/heroes.service.ts (deleteHero)" linenums="false">
 </code-example>
 
 The `HeroesComponent` initiates the actual DELETE operation by subscribing to 
@@ -343,7 +343,7 @@ the `Observable` returned by this service method.
 <code-example 
   path="http/src/app/heroes/heroes.component.ts"
   region="delete-hero-subscribe" 
-  header="app/heroes/heroes.component.ts (deleteHero)" linenums="false">
+  title="app/heroes/heroes.component.ts (deleteHero)" linenums="false">
 </code-example>
 
 The component isn't expecting a result from the delete operation, so it subscribes without a callback. Even though you are not using the result, you still have to subscribe. Calling the `subscribe()` method _executes_ the observable, which is what initiates the DELETE request. 
@@ -403,7 +403,7 @@ The following `HeroesService` example is just like the POST example.
 <code-example 
   path="http/src/app/heroes/heroes.service.ts"
   region="updateHero" 
-  header="app/heroes/heroes.service.ts (updateHero)" linenums="false">
+  title="app/heroes/heroes.service.ts (updateHero)" linenums="false">
 </code-example>
 
 For the reasons [explained above](#always-subscribe), the caller (`HeroesComponent.update()` in this case) must `subscribe()` to the observable returned from the `HttpClient.put()`
@@ -464,7 +464,7 @@ Here's a pertinent excerpt from the template:
 <code-example 
   path="http/src/app/package-search/package-search.component.html"
   region="search" 
-  header="app/package-search/package-search.component.html (search)">
+  title="app/package-search/package-search.component.html (search)">
 </code-example>
 
 The `(keyup)` event binding sends every keystroke to the component's `search()` method.
@@ -476,7 +476,7 @@ That's easy to implement with RxJS operators, as shown in this excerpt.
 <code-example 
   path="http/src/app/package-search/package-search.component.ts"
   region="debounce" 
-  header="app/package-search/package-search.component.ts (excerpt))">
+  title="app/package-search/package-search.component.ts (excerpt))">
 </code-example>
 
 The `searchText$` is the sequence of search-box values coming from the user.
@@ -543,7 +543,7 @@ To implement an interceptor, declare a class that implements the `intercept()` m
  Here is a do-nothing _noop_ interceptor that simply passes the request through without touching it:
 <code-example 
   path="http/src/app/http-interceptors/noop-interceptor.ts"
-  header="app/http-interceptors/noop-interceptor.ts"
+  title="app/http-interceptors/noop-interceptor.ts"
   linenums="false">
 </code-example>
 
@@ -608,7 +608,7 @@ Consider creating a "barrel" file that gathers all the interceptor providers int
 <code-example 
   path="http/src/app/http-interceptors/index.ts"
   region="interceptor-providers"
-  header="app/http-interceptors/index.ts" linenums="false">
+  title="app/http-interceptors/index.ts" linenums="false">
 </code-example>
 
 Then import and add it to the `AppModule` _providers array_ like this:
@@ -616,7 +616,7 @@ Then import and add it to the `AppModule` _providers array_ like this:
 <code-example 
   path="http/src/app/app.module.ts"
   region="interceptor-providers"
-  header="app/app.module.ts (interceptor providers)" linenums="false">
+  title="app/app.module.ts (interceptor providers)" linenums="false">
 </code-example>
 
 As you create new interceptors, add them to the `httpInterceptorProviders` array and
@@ -672,7 +672,7 @@ You can clone and modify the request in a single step as in this example.
 <code-example 
   path="http/src/app/http-interceptors/ensure-https-interceptor.ts"
   region="excerpt" 
-  header="app/http-interceptors/ensure-https-interceptor.ts (excerpt)" linenums="false">
+  title="app/http-interceptors/ensure-https-interceptor.ts (excerpt)" linenums="false">
 </code-example>
 
 The `clone()` method's hash argument allows you to mutate specific properties of the request while copying the others.
@@ -692,7 +692,7 @@ If you must mutate the request body, copy it first, change the copy,
 <code-example 
   path="http/src/app/http-interceptors/trim-name-interceptor.ts"
   region="excerpt" 
-  header="app/http-interceptors/trim-name-interceptor.ts (excerpt)" linenums="false">
+  title="app/http-interceptors/trim-name-interceptor.ts (excerpt)" linenums="false">
 </code-example>
 
 ##### Clearing the request body
@@ -718,7 +718,7 @@ adds an authorization header with that token to every outgoing request:
 
 <code-example 
   path="http/src/app/http-interceptors/auth-interceptor.ts"
-  header="app/http-interceptors/auth-interceptor.ts">
+  title="app/http-interceptors/auth-interceptor.ts">
 </code-example>
 
 The practice of cloning a request to set new headers is so common that 
@@ -747,7 +747,7 @@ with the injected `MessageService`.
 <code-example 
   path="http/src/app/http-interceptors/logging-interceptor.ts"
   region="excerpt" 
-  header="app/http-interceptors/logging-interceptor.ts)">
+  title="app/http-interceptors/logging-interceptor.ts)">
 </code-example>
 
 The RxJS `tap` operator captures whether the request succeed or failed.
@@ -768,7 +768,7 @@ The `CachingInterceptor` demonstrates this approach.
 <code-example 
   path="http/src/app/http-interceptors/caching-interceptor.ts"
   region="v1" 
-  header="app/http-interceptors/caching-interceptor.ts)" linenums="false">
+  title="app/http-interceptors/caching-interceptor.ts)" linenums="false">
 </code-example>
 
 The `isCachable()` function determines if the request is cachable.
@@ -858,7 +858,7 @@ with the `reportProgress` option set true to enable tracking of progress events.
 <code-example 
   path="http/src/app/uploader/uploader.service.ts"
   region="upload-request" 
-  header="app/uploader/uploader.service.ts (upload request)">
+  title="app/uploader/uploader.service.ts (upload request)">
 </code-example>
 
 <div class="alert is-important">
@@ -873,7 +873,7 @@ returns an `Observable` of `HttpEvents`, the same events processed by intercepto
 <code-example 
   path="http/src/app/uploader/uploader.service.ts"
   region="upload-body" 
-  header="app/uploader/uploader.service.ts (upload body)" linenums="false">
+  title="app/uploader/uploader.service.ts (upload body)" linenums="false">
 </code-example>
 
 The `getEventMessage` method interprets each type of `HttpEvent` in the event stream.
@@ -881,7 +881,7 @@ The `getEventMessage` method interprets each type of `HttpEvent` in the event st
 <code-example 
   path="http/src/app/uploader/uploader.service.ts"
   region="getEventMessage" 
-  header="app/uploader/uploader.service.ts (getEventMessage)" linenums="false">
+  title="app/uploader/uploader.service.ts (getEventMessage)" linenums="false">
 </code-example>
 
 <div class="alert is-helpful">
@@ -964,7 +964,7 @@ along with the other symbols your tests require.
 <code-example 
   path="http/src/testing/http-client.spec.ts"
   region="imports" 
-  header="app/testing/http-client.spec.ts (imports)" linenums="false">
+  title="app/testing/http-client.spec.ts (imports)" linenums="false">
 </code-example>
 
 Then add the `HttpClientTestingModule` to the `TestBed` and continue with
@@ -973,7 +973,7 @@ the setup of the _service-under-test_.
 <code-example 
   path="http/src/testing/http-client.spec.ts"
   region="setup" 
-  header="app/testing/http-client.spec.ts(setup)" linenums="false">
+  title="app/testing/http-client.spec.ts(setup)" linenums="false">
 </code-example>
 
 Now requests made in the course of your tests will hit the testing backend instead of the normal backend.
@@ -988,7 +988,7 @@ Now you can write a test that expects a GET Request to occur and provides a mock
 <code-example 
   path="http/src/testing/http-client.spec.ts"
   region="get-test" 
-  header="app/testing/http-client.spec.ts(httpClient.get)" linenums="false">
+  title="app/testing/http-client.spec.ts(httpClient.get)" linenums="false">
 </code-example>
 
 The last step, verifying that no requests remain outstanding, is common enough for you to move it into an `afterEach()` step:

aio/content/guide/i18n.md

@@ -19,7 +19,7 @@ Angular simplifies the following aspects of internationalization:
 * Handling plural forms of words.
 * Handling alternative text.
 
-For localization, you can use the [Angular CLI](cli) to generate most of the boilerplate necessary to create files for translators, and to publish your app in multiple languages. 
+For localization, you can use the [**Angular CLI**](https://cli.angular.io/) to generate most of the boilerplate necessary to create files for translators, and to publish your app in multiple languages. 
 After you have set up your app to use i18n, the CLI can help you with the following steps:
 * Extracting localizable text into a file that you can send out to be translated.
 * Building and serving the app for a given locale, using the translated text.
@@ -57,7 +57,7 @@ To set your app's locale to another value, use the CLI parameter `--configuratio
 
 If you use JIT, you also need to define the `LOCALE_ID` provider in your main module:
 
-<code-example path="i18n/doc-files/app.module.ts" header="src/app/app.module.ts" linenums="false">
+<code-example path="i18n/doc-files/app.module.ts" title="src/app/app.module.ts" linenums="false">
 </code-example>
 
 
@@ -97,7 +97,7 @@ The CLI imports the locale data for you when you use the parameter `--configurat
 
 If you want to import locale data for other languages, you can do it manually:
 
-<code-example path="i18n/doc-files/app.locale_data.ts" region="import-locale" header="src/app/app.module.ts" linenums="false">
+<code-example path="i18n/doc-files/app.locale_data.ts" region="import-locale" title="src/app/app.module.ts" linenums="false">
 </code-example>
 
 The first parameter is an object containing the locale data imported from `@angular/common/locales`.
@@ -112,7 +112,7 @@ The files in `@angular/common/locales` contain most of the locale data that you
 need, but some advanced formatting options might only be available in the extra dataset that you can
 import from `@angular/common/locales/extra`. An error message informs you when this is the case.
 
-  <code-example path="i18n/doc-files/app.locale_data_extra.ts" region="import-locale-extra" header="src/app/app.module.ts" linenums="false">
+  <code-example path="i18n/doc-files/app.locale_data_extra.ts" region="import-locale-extra" title="src/app/app.module.ts" linenums="false">
   </code-example>
 
 <div class="alert is-helpful">
@@ -158,12 +158,12 @@ text is to be translated.
 
 In the example below, an `<h1>` tag displays a simple English language greeting, "Hello i18n!"
 
-<code-example path="i18n/doc-files/app.component.html" region="greeting" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/doc-files/app.component.html" region="greeting" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 To mark the greeting for translation, add the `i18n` attribute to the `<h1>` tag.
 
-<code-example path="i18n/doc-files/app.component.html" region="i18n-attribute" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/doc-files/app.component.html" region="i18n-attribute" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 
@@ -183,7 +183,7 @@ To translate a text message accurately, the translator may need additional infor
 You can add a description of the text message as the value of the `i18n` attribute, as shown in the
 example below:
 
-<code-example path="i18n/doc-files/app.component.html" region="i18n-attribute-desc" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/doc-files/app.component.html" region="i18n-attribute-desc" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 The translator may also need to know the meaning or intent of the text message within this particular
@@ -192,7 +192,7 @@ app context.
 You add context by beginning the `i18n` attribute value with the _meaning_ and
 separating it from the _description_ with the `|` character: `<meaning>|<description>`
 
-<code-example path="i18n/doc-files/app.component.html" region="i18n-attribute-meaning" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/doc-files/app.component.html" region="i18n-attribute-meaning" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 All occurrences of a text message that have the same meaning will have the same translation.
@@ -220,7 +220,7 @@ You must then update the translation file with the new id.
 Alternatively, you can specify a custom id in the `i18n` attribute by using the prefix `@@`.
 The example below defines the custom id `introductionHeader`:
 
-<code-example path='i18n/doc-files/app.component.html' region='i18n-attribute-solo-id' header='app/app.component.html' linenums="false">
+<code-example path='i18n/doc-files/app.component.html' region='i18n-attribute-solo-id' title='app/app.component.html' linenums="false">
 </code-example>
 
 When you specify a custom id, the extractor tool and compiler generate a translation unit with that
@@ -238,12 +238,12 @@ You can use a custom id in combination with a description by including both in t
 `i18n` attribute. In the example below, the `i18n` attribute value includes a description, followed
 by the custom `id`:
 
-<code-example path='i18n/doc-files/app.component.html' region='i18n-attribute-id' header='app/app.component.html' linenums="false">
+<code-example path='i18n/doc-files/app.component.html' region='i18n-attribute-id' title='app/app.component.html' linenums="false">
 </code-example>
 
 You also can add a meaning, as shown in this example:
 
-<code-example path='i18n/doc-files/app.component.html' region='i18n-attribute-meaning-and-id' header='app/app.component.html' linenums="false">
+<code-example path='i18n/doc-files/app.component.html' region='i18n-attribute-meaning-and-id' title='app/app.component.html' linenums="false">
 </code-example>
 
 #### Define unique custom ids
@@ -287,7 +287,7 @@ However, if you don't want to create a new DOM element merely to facilitate tran
 you can wrap the text in an `<ng-container>` element.
 The `<ng-container>` is transformed into an html comment:
 
-<code-example path="i18n/src/app/app.component.html" region="i18n-ng-container" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/src/app/app.component.html" region="i18n-ng-container" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 {@a translate-attributes}
@@ -296,14 +296,14 @@ The `<ng-container>` is transformed into an html comment:
 Displayed text is sometimes supplied as the value of an attribute, rather than the content of tag.
 For example, if your template has an image with a `title` attribute, the text value of the `title` attribute needs to be translated.
 
-<code-example path="i18n/doc-files/app.component.html" region="i18n-title" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/doc-files/app.component.html" region="i18n-title" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 To mark an attribute for translation, add an attribute in the form of `i18n-x`,
 where `x` is the name of the attribute to translate. The following example shows how to mark the
 `title` attribute for translation by adding the `i18n-title` attribute on the `img` tag:
 
-<code-example path="i18n/src/app/app.component.html" region="i18n-title-translate" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/src/app/app.component.html" region="i18n-title-translate" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 This technique works for any attribute of any element.
@@ -328,7 +328,7 @@ Other languages might express the cardinality differently.
 The example below shows how to use a `plural` ICU expression to display one of those three options
 based on when the update occurred:
 
-<code-example path="i18n/src/app/app.component.html" region="i18n-plural" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/src/app/app.component.html" region="i18n-plural" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 * The first parameter is the key. It is bound to the component property (`minutes`), which determines
@@ -384,7 +384,7 @@ The following format message in the component template binds to the component's
 which outputs one of the following string values: "m", "f" or "o".
 The message maps those values to the appropriate translations:
 
-<code-example path="i18n/src/app/app.component.html" region="i18n-select" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/src/app/app.component.html" region="i18n-select" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 {@a nesting-ICUS}
@@ -392,7 +392,7 @@ The message maps those values to the appropriate translations:
 
 You can also nest different ICU expressions together, as shown in this example:
 
-<code-example path="i18n/src/app/app.component.html" region="i18n-nested" header="src/app/app.component.html">
+<code-example path="i18n/src/app/app.component.html" region="i18n-nested" title="src/app/app.component.html">
 </code-example>
 
 {@a ng-xi18n}
@@ -413,7 +413,7 @@ By default, the command creates a file named `messages.xlf` in your `src/` folde
 
 If you don't use the CLI, you have two options:
 * You can use the `ng-xi18n` tool directly from the `@angular/compiler-cli` package.
-For more information, see the [`ng xi18n` command documentation](cli/xi18n).
+For more information, see [i18n in the CLI documentation](https://github.com/angular/angular-cli/wiki/xi18n).
 * You can use the CLI Webpack plugin `AngularCompilerPlugin` from the `@ngtools/webpack` package.
 Set the parameters `i18nOutFile` and `i18nOutFormat` to trigger the extraction.
 For more information, see the [Angular Ahead-of-Time Webpack Plugin documentation](https://github.com/angular/angular-cli/tree/master/packages/%40ngtools/webpack).
@@ -530,7 +530,7 @@ This sample file is easy to translate without a special editor or knowledge of F
 
 1. Open `messages.fr.xlf` and find the first `<trans-unit>` section:
 
-> <code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-hello-before" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+> <code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-hello-before" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 > This XML element represents the translation of the `<h1>` greeting tag that you marked with the
@@ -546,12 +546,12 @@ This sample file is easy to translate without a special editor or knowledge of F
   and context provided by the source, description, and meaning elements to guide your selection of
   the appropriate French translation.
 
-> <code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-hello" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;, after translation)" linenums="false">
+> <code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-hello" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;, after translation)" linenums="false">
 </code-example>
 
 3. Translate the other text nodes the same way:
 
-> <code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-other-nodes" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+> <code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-other-nodes" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 <div class="alert is-important">
@@ -578,7 +578,7 @@ must be just below the translation unit for the logo.
 
 To translate a `plural`, translate its ICU format match values:
 
-<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-plural" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-plural" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 You can add or remove plural cases, with each language having its own cardinality.  (See
@@ -589,7 +589,7 @@ You can add or remove plural cases, with each language having its own cardinalit
 
 Below is the content of our example `select` ICU expression in the component template:
 
-<code-example path="i18n/src/app/app.component.html" region="i18n-select" header="src/app/app.component.html" linenums="false">
+<code-example path="i18n/src/app/app.component.html" region="i18n-select" title="src/app/app.component.html" linenums="false">
 </code-example>
 
 The extraction tool broke that into two translation units because ICU expressions are extracted
@@ -600,18 +600,18 @@ In place of the `select` is a placeholder, `<x id="ICU">`, that represents the `
 Translate the text and move around the placeholder if necessary, but don't remove it. If you remove
 the placeholder, the ICU expression will not be present in your translated app.
 
-<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-select-1" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-select-1" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 The second translation unit, immediately below the first one, contains the `select` message.
 Translate that as well.
 
-<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-select-2" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-select-2" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 Here they are together, after translation:
 
-<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-select" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translated-select" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 {@a translate-nested}
@@ -620,17 +620,17 @@ Here they are together, after translation:
 A nested expression is similar to the previous examples. As in the previous example, there are
 two translation units. The first one contains the text outside of the nested expression:
 
-<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-nested-1" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-nested-1" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 The second unit contains the complete nested expression:
 
-<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-nested-2" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-nested-2" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 And both together:
 
-<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-nested" header="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
+<code-example path="i18n/doc-files/messages.fr.xlf.html" region="translate-nested" title="src/locale/messages.fr.xlf (&lt;trans-unit&gt;)" linenums="false">
 </code-example>
 
 The entire template translation is complete. The next section describes how to load that translation
@@ -642,15 +642,15 @@ into the app.
 The sample app and its translation file are now as follows:
 
 <code-tabs>
-  <code-pane header="src/app/app.component.html" path="i18n/src/app/app.component.html">
+  <code-pane title="src/app/app.component.html" path="i18n/src/app/app.component.html">
   </code-pane>
-  <code-pane header="src/app/app.component.ts" path="i18n/src/app/app.component.ts">
+  <code-pane title="src/app/app.component.ts" path="i18n/src/app/app.component.ts">
   </code-pane>
-  <code-pane header="src/app/app.module.ts" path="i18n/src/app/app.module.ts">
+  <code-pane title="src/app/app.module.ts" path="i18n/src/app/app.module.ts">
   </code-pane>
-  <code-pane header="src/main.ts" path="i18n/doc-files/main.1.ts">
+  <code-pane title="src/main.ts" path="i18n/doc-files/main.1.ts">
   </code-pane>
-  <code-pane header="src/locale/messages.fr.xlf" path="i18n/doc-files/messages.fr.xlf.html">
+  <code-pane title="src/locale/messages.fr.xlf" path="i18n/doc-files/messages.fr.xlf.html">
   </code-pane>
 </code-tabs>
 
@@ -672,7 +672,7 @@ format that Angular understands, such as `.xtb`.
 How you provide this information depends upon whether you compile with
 the JIT compiler or the AOT compiler.
 
-  * With [AOT](guide/i18n#merge-aot), you pass the information as configuration settings.
+  * With [AOT](guide/i18n#merge-aot), you pass the information as a configuration
   * With [JIT](guide/i18n#merge-jit), you provide the information at bootstrap time.
 
 
@@ -790,12 +790,12 @@ while compiling the app:
 The Angular `bootstrapModule` method has a second `compilerOptions` parameter that can influence the
 behavior of the compiler. You can use it to specify the translation providers:
 
-<code-example path="i18n/doc-files/main.2.ts" header="src/main.ts">
+<code-example path="i18n/doc-files/main.2.ts" title="src/main.ts">
 </code-example>
 
 Then provide the `LOCALE_ID` in the main module:
 
-<code-example path="i18n/doc-files/app.module.ts" header="src/app/app.module.ts" linenums="false">
+<code-example path="i18n/doc-files/app.module.ts" title="src/app/app.module.ts" linenums="false">
 </code-example>
 
 
@@ -826,7 +826,7 @@ If you use the JIT compiler, specify the warning level in the compiler config at
 the 'MissingTranslationStrategy' property. The example below shows how to set the warning level to
 error:
 
-<code-example path="i18n/doc-files/main.3.ts" header="src/main.ts">
+<code-example path="i18n/doc-files/main.3.ts" title="src/main.ts">
 </code-example>
 
 ### Build for multiple locales

aio/content/guide/lazy-loading-ngmodules.md

@@ -98,7 +98,7 @@ placeholder markup in `app.component.html` with a custom nav
 so you can easily navigate to your modules in the browser:
 
 
-<code-example path="lazy-loading-ngmodules/src/app/app.component.html" region="app-component-template" header="src/app/app.component.html" linenums="false">
+<code-example path="lazy-loading-ngmodules/src/app/app.component.html" region="app-component-template" title="src/app/app.component.html" linenums="false">
 
 </code-example>
 
@@ -138,19 +138,19 @@ Each feature module acts as a doorway via the router. In the `AppRoutingModule`,
 In `AppRoutingModule`, update the `routes` array with the following:
 
 
-<code-example path="lazy-loading-ngmodules/src/app/app-routing.module.ts" region="const-routes" header="src/app/app-routing.module.ts" linenums="false">
+<code-example path="lazy-loading-ngmodules/src/app/app-routing.module.ts" region="const-routes" title="src/app/app-routing.module.ts" linenums="false">
 
 </code-example>
 
 
-The import statements stay the same. The first two paths are the routes to the `CustomersModule` and the `OrdersModule` respectively. Notice that the lazy loading syntax uses `loadChildren` followed by a string that is the relative path to the module, a hash mark or `#`, and the module’s class name.
+The import statements stay the same. The first two paths are the routes to the `CustomersModule` and the `OrdersModule` respectively. Notice that the lazy loading syntax uses `loadChildren` followed by a string that is the path to the module, a hash mark or `#`, and the module’s class name.
 
 ### Inside the feature module
 
 Next, take a look at `customers.module.ts`. If you’re using the CLI and following the steps outlined in this page, you don’t have to do anything here. The feature module is like a connector between the `AppRoutingModule` and the feature routing module. The `AppRoutingModule` imports the feature module, `CustomersModule`, and `CustomersModule` in turn imports the `CustomersRoutingModule`.
 
 
-<code-example path="lazy-loading-ngmodules/src/app/customers/customers.module.ts" region="customers-module" header="src/app/customers/customers.module.ts" linenums="false">
+<code-example path="lazy-loading-ngmodules/src/app/customers/customers.module.ts" region="customers-module" title="src/app/customers/customers.module.ts" linenums="false">
 
 </code-example>
 
@@ -163,7 +163,7 @@ The `customers.module.ts` file imports the `CustomersRoutingModule` and `Custome
 
 The next step is in `customers-routing.module.ts`. First, import the component at the top of the file with the other JavaScript import statements. Then, add the route to `CustomerListComponent`.
 
-<code-example path="lazy-loading-ngmodules/src/app/customers/customers-routing.module.ts" region="customers-routing-module" header="src/app/customers/customers-routing.module.ts" linenums="false">
+<code-example path="lazy-loading-ngmodules/src/app/customers/customers-routing.module.ts" region="customers-routing-module" title="src/app/customers/customers-routing.module.ts" linenums="false">
 
 </code-example>
 
@@ -172,7 +172,7 @@ Notice that the `path` is set to an empty string. This is because the path in `A
 
 Repeat this last step of importing the `OrdersListComponent` and configuring the Routes array for the `orders-routing.module.ts`:
 
-<code-example path="lazy-loading-ngmodules/src/app/orders/orders-routing.module.ts" region="orders-routing-module-detail" header="src/app/orders/orders-routing.module.ts (excerpt)" linenums="false">
+<code-example path="lazy-loading-ngmodules/src/app/orders/orders-routing.module.ts" region="orders-routing-module-detail" title="src/app/orders/orders-routing.module.ts (excerpt)" linenums="false">
 
 </code-example>
 

aio/content/guide/lifecycle-hooks.md

@@ -23,7 +23,7 @@ Each interface has a single hook method whose name is the interface name prefixe
 For example, the `OnInit` interface has a hook method named `ngOnInit()`
 that Angular calls shortly after creating the component:
 
-<code-example path="lifecycle-hooks/src/app/peek-a-boo.component.ts" region="ngOnInit" header="peek-a-boo.component.ts (excerpt)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/peek-a-boo.component.ts" region="ngOnInit" title="peek-a-boo.component.ts (excerpt)" linenums="false"></code-example>
 
 No directive or component will implement all of the lifecycle hooks.
 Angular only calls a directive/component hook method *if it is defined*.
@@ -339,13 +339,13 @@ The heroes will never know they're being watched.
 The sneaky spy directive is simple, consisting almost entirely of `ngOnInit()` and `ngOnDestroy()` hooks
 that log messages to the parent via an injected `LoggerService`.
 
-<code-example path="lifecycle-hooks/src/app/spy.directive.ts" region="spy-directive" header="src/app/spy.directive.ts" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/spy.directive.ts" region="spy-directive" title="src/app/spy.directive.ts" linenums="false"></code-example>
 
 You can apply the spy to any native or component element and it'll be initialized and destroyed
 at the same time as that element.
 Here it is attached to the repeated hero `<div>`:
 
-<code-example path="lifecycle-hooks/src/app/spy.component.html" region="template" header="src/app/spy.component.html" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/spy.component.html" region="template" title="src/app/spy.component.html" linenums="false"></code-example>
 
 Each spy's birth and death marks the birth and death of the attached hero `<div>`
 with an entry in the *Hook Log* as seen here:
@@ -425,7 +425,7 @@ You risk memory leaks if you neglect to do so.
 Angular calls its `ngOnChanges()` method whenever it detects changes to ***input properties*** of the component (or directive).
 This example monitors the `OnChanges` hook.
 
-<code-example path="lifecycle-hooks/src/app/on-changes.component.ts" region="ng-on-changes" header="on-changes.component.ts (excerpt)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/on-changes.component.ts" region="ng-on-changes" title="on-changes.component.ts (excerpt)" linenums="false"></code-example>
 
 The `ngOnChanges()` method takes an object that maps each changed property name to a
 [SimpleChange](api/core/SimpleChange) object holding the current and previous property values.
@@ -433,11 +433,11 @@ This hook iterates over the changed properties and logs them.
 
 The example component, `OnChangesComponent`, has two input properties: `hero` and `power`.
 
-<code-example path="lifecycle-hooks/src/app/on-changes.component.ts" region="inputs" header="src/app/on-changes.component.ts" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/on-changes.component.ts" region="inputs" title="src/app/on-changes.component.ts" linenums="false"></code-example>
 
 The host `OnChangesParentComponent` binds to them like this:
 
-<code-example path="lifecycle-hooks/src/app/on-changes-parent.component.html" region="on-changes" header="src/app/on-changes-parent.component.html"></code-example>
+<code-example path="lifecycle-hooks/src/app/on-changes-parent.component.html" region="on-changes" title="src/app/on-changes-parent.component.html"></code-example>
 
 Here's the sample in action as the user makes changes.
 
@@ -468,7 +468,7 @@ Use the `DoCheck` hook to detect and act upon changes that Angular doesn't catch
 
 The *DoCheck* sample extends the *OnChanges* sample with the following `ngDoCheck()` hook:
 
-<code-example path="lifecycle-hooks/src/app/do-check.component.ts" region="ng-do-check" header="DoCheckComponent (ngDoCheck)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/do-check.component.ts" region="ng-do-check" title="DoCheckComponent (ngDoCheck)" linenums="false"></code-example>
 
 This code inspects certain _values of interest_, capturing and comparing their current state against previous values.
 It writes a special message to the log when there are no substantive changes to the `hero` or the `power`
@@ -497,25 +497,25 @@ The *AfterView* sample explores the `AfterViewInit()` and `AfterViewChecked()` h
 
 Here's a child view that displays a hero's name in an `<input>`:
 
-<code-example path="lifecycle-hooks/src/app/after-view.component.ts" region="child-view" header="ChildComponent" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/after-view.component.ts" region="child-view" title="ChildComponent" linenums="false"></code-example>
 
 The `AfterViewComponent` displays this child view *within its template*:
 
-<code-example path="lifecycle-hooks/src/app/after-view.component.ts" region="template" header="AfterViewComponent (template)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/after-view.component.ts" region="template" title="AfterViewComponent (template)" linenums="false"></code-example>
 
 The following hooks take action based on changing values *within the child view*,
 which can only be reached by querying for the child view via the property decorated with
 [@ViewChild](api/core/ViewChild).
 
 
-<code-example path="lifecycle-hooks/src/app/after-view.component.ts" region="hooks" header="AfterViewComponent (class excerpts)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/after-view.component.ts" region="hooks" title="AfterViewComponent (class excerpts)" linenums="false"></code-example>
 
 {@a wait-a-tick}
 
 ### Abide by the unidirectional data flow rule
 The `doSomething()` method updates the screen when the hero name exceeds 10 characters.
 
-<code-example path="lifecycle-hooks/src/app/after-view.component.ts" region="do-something" header="AfterViewComponent (doSomething)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/after-view.component.ts" region="do-something" title="AfterViewComponent (doSomething)" linenums="false"></code-example>
 
 Why does the `doSomething()` method wait a tick before updating `comment`?
 
@@ -559,7 +559,7 @@ Consider this variation on the [previous _AfterView_](guide/lifecycle-hooks#afte
 This time, instead of including the child view within the template, it imports the content from
 the `AfterContentComponent`'s parent. Here's the parent's template:
 
-<code-example path="lifecycle-hooks/src/app/after-content.component.ts" region="parent-template" header="AfterContentParentComponent (template excerpt)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/after-content.component.ts" region="parent-template" title="AfterContentParentComponent (template excerpt)" linenums="false"></code-example>
 
 Notice that the `<app-child>` tag is tucked between the `<after-content>` tags.
 Never put content between a component's element tags *unless you intend to project that content
@@ -567,7 +567,7 @@ into the component*.
 
 Now look at the component's template:
 
-<code-example path="lifecycle-hooks/src/app/after-content.component.ts" region="template" header="AfterContentComponent (template)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/after-content.component.ts" region="template" title="AfterContentComponent (template)" linenums="false"></code-example>
 
 The `<ng-content>` tag is a *placeholder* for the external content.
 It tells Angular where to insert that content.
@@ -603,7 +603,7 @@ The following *AfterContent* hooks take action based on changing values in a *co
 which can only be reached by querying for them via the property decorated with
 [@ContentChild](api/core/ContentChild).
 
-<code-example path="lifecycle-hooks/src/app/after-content.component.ts" region="hooks" header="AfterContentComponent (class excerpts)" linenums="false"></code-example>
+<code-example path="lifecycle-hooks/src/app/after-content.component.ts" region="hooks" title="AfterContentComponent (class excerpts)" linenums="false"></code-example>
 
 {@a no-unidirectional-flow-worries}
 

aio/content/guide/ngmodule-faq.md

@@ -480,7 +480,7 @@ You can throw an error or take other remedial action.
 Certain NgModules, such as `BrowserModule`, implement such a guard.
 Here is a custom constructor for an NgModule called `CoreModule`.
 
-<code-example path="ngmodule-faq/src/app/core/core.module.ts" region="ctor" header="src/app/core/core.module.ts (Constructor)" linenums="false">
+<code-example path="ngmodule-faq/src/app/core/core.module.ts" region="ctor" title="src/app/core/core.module.ts (Constructor)" linenums="false">
 </code-example>
 
 <hr/>

aio/content/guide/ngmodule-vs-jsmodule.md

@@ -29,7 +29,7 @@ JavaScript modules help you namespace, preventing accidental global variables.
 <!-- KW-- perMisko: let's discuss. This does not answer the question why it is different. Also, last sentence is confusing.-->
 NgModules are classes decorated with `@NgModule`. The `@NgModule` decorator’s `imports` array tells Angular what other NgModules the current module needs. The modules in the `imports` array are different than JavaScript modules because they are NgModules rather than regular JavaScript modules. Classes with an `@NgModule` decorator are by convention kept in their own files, but what makes them an `NgModule` isn’t being in their own file, like JavaScript modules; it’s the presence of `@NgModule` and its metadata.
 
-The `AppModule` generated from the [Angular CLI](cli) demonstrates both kinds of modules in action:
+The `AppModule` generated from the Angular CLI demonstrates both kinds of modules in action:
 
 ```typescript
 /* These are JavaScript import statements. Angular doesn’t know anything about these. */

aio/content/guide/ngmodules.md

@@ -57,9 +57,9 @@ You then import these modules into the root module.
 
 ## The basic NgModule
 
-The [Angular CLI](cli) generates the following basic app module when creating a new app.
+The CLI generates the following basic app module when creating a new app.
 
-<code-example path="bootstrapping/src/app/app.module.ts" region="whole-ngmodule" header="src/app/app.module.ts" linenums="false">
+<code-example path="bootstrapping/src/app/app.module.ts" region="whole-ngmodule" title="src/app/app.module.ts" linenums="false">
 </code-example>
 
 At the top are the import statements. The next section is where you configure the `@NgModule` by stating what components and directives belong to it (`declarations`) as well as which other modules it uses (`imports`). This page builds on [Bootstrapping](guide/bootstrapping), which covers the structure of an NgModule in detail. If you need more information on the structure of an `@NgModule`, be sure to read [Bootstrapping](guide/bootstrapping).

aio/content/guide/npm-packages.md

@@ -1,141 +1,173 @@
-# Workspace npm dependencies
+# Npm Packages
 
-The Angular Framework, Angular CLI, and components used by Angular applications are packaged as [npm packages](https://docs.npmjs.com/getting-started/what-is-npm "What is npm?") and distributed via the [npm registry](https://docs.npmjs.com/).
+ The [**Angular CLI**](https://cli.angular.io/), Angular applications, and Angular itself depend upon features and functionality provided by libraries that are available as [**npm**](https://docs.npmjs.com/) packages.
 
-You can download and install these npm packages by using the [npm CLI client](https://docs.npmjs.com/cli/install), which is installed with and runs as a [Node.js®](https://nodejs.org "Nodejs.org") application. By default, the Angular CLI uses the npm client.
-
-Alternatively, you can use the [yarn client](https://yarnpkg.com/) for downloading and installing npm packages. 
+You can download and install these npm packages with the [**npm client**](https://docs.npmjs.com/cli/install), which runs as a Node.js® application.
 
+The [**yarn client**](https://yarnpkg.com/en/) is a popular alternative for downloading and installing npm packages.
+The Angular CLI uses `yarn` by default to install npm packages when you create a new project.
 
 <div class="alert is-helpful">
 
-See [Getting Started](guide/quickstart#prerequisites) for information about the required versions and installation of Node.js and npm.
+Node.js and npm are essential to Angular development.
 
-If you already have projects running on your machine that use other versions of Node.js and npm, consider using [nvm](https://github.com/creationix/nvm) to manage the multiple versions of Node.js and npm. 
+[Get them now](https://docs.npmjs.com/getting-started/installing-node "Installing Node.js and updating npm")
+if they're not already installed on your machine.
+
+**Verify that you are running Node.js `v8.x` or higher and npm `5.x` or higher**
+by running the commands `node -v` and `npm -v` in a terminal/console window.
+Older versions produce errors.
+
+Consider using [nvm](https://github.com/creationix/nvm) for managing multiple
+versions of Node.js and npm. You may need [nvm](https://github.com/creationix/nvm) if
+you already have projects running on your machine that use other versions of Node.js and npm.
 
 </div>
 
+## _package.json_
 
-## `package.json`
+Both `npm` and `yarn` install packages that are identified in a [**package.json**](https://docs.npmjs.com/files/package.json) file.
 
-Both `npm` and `yarn` install the packages that are identified in a [`package.json`](https://docs.npmjs.com/files/package.json) file.
+The CLI `ng new` command creates a default `package.json` file for your project.
+This `package.json` specifies _a starter set of packages_ that work well together and 
+jointly support many common application scenarios.
 
-The CLI command `ng new` creates a `package.json` file when it creates the new workspace. 
-This `package.json` is used by all projects in the workspace, including the initial app project that is  created by the CLI when it creates the workspace.   
+You will add packages to `package.json` as your application evolves.
+You may even remove some.
 
-Initially, this `package.json` includes _a starter set of packages_, some of which are required by Angular and others that support common application scenarios.
-You add packages to `package.json` as your application evolves. 
-You may even remove some. 
+This guide focuses on the most important packages in the starter set.
 
-The `package.json` is organized into two groups of packages:
+#### *dependencies* and *devDependencies*
 
-* [Dependencies](guide/npm-packages#dependencies) are essential to *running* applications.
-* [DevDependencies](guide/npm-packages#dev-dependencies) are only necessary to *develop* applications.
-
-<div class="alert is-helpful">
-
-**Library developers:** By default, the CLI command [`ng generate library`](cli/generate) creates a `package.json` for the new library. That `package.json` is used when publishing the library to npm.
-For more information, see the CLI wiki page [Library Support](https://github.com/angular/angular-cli/wiki/stories-create-library). 
-</div>
+The `package.json` includes two sets of packages,
+[dependencies](guide/npm-packages#dependencies) and [devDependencies](guide/npm-packages#dev-dependencies).
 
+The *dependencies* are essential to *running* the application.
+The *devDependencies* are only necessary to *develop* the application.
 
 {@a dependencies}
-## Dependencies
-
-The packages listed in the `dependencies` section of `package.json` are essential to *running* applications. 
 
+## *Dependencies*
 The `dependencies` section of `package.json` contains:
 
-* [**Angular packages**](#angular-packages): Angular core and optional modules; their package names begin `@angular/`.
+* **Angular packages**: Angular core and optional modules; their package names begin `@angular/`.
 
-* [**Support packages**](#support-packages): 3rd party libraries that must be present for Angular apps to run.
+* **Support packages**: 3rd party libraries that must be present for Angular apps to run.
 
-* [**Polyfill packages**](#polyfills): Polyfills plug gaps in a browser's JavaScript implementation.
+* **Polyfill packages**: Polyfills plug gaps in a browser's JavaScript implementation.
 
-To add a new dependency, use the [`ng add`](cli/add) command.
+### Angular Packages
 
-{@a angular-packages}
-### Angular packages
+**@angular/animations**: Angular's animations library makes it easy to define and apply animation effects such as page and list transitions.
+Read about it in the [Animations guide](guide/animations).
 
-The following Angular packages are included as dependencies in the default `package.json` file for a new Angular workspace.
-For a complete list of Angular packages, see the [API reference](http://angular.io/api?type=package). 
+**@angular/common**: The commonly needed services, pipes, and directives provided by the Angular team.
+The [`HttpClientModule`](guide/http) is also here, in the '@angular/common/http' subfolder.
 
-Package name                               | Description
-----------------------------------------   | --------------------------------------------------
-[**@angular/animations**](api/animations) | Angular's animations library makes it easy to define and apply animation effects such as page and list transitions. For more information, see the [Animations guide](guide/animations).
-[**@angular/common**](api/common) | The commonly-needed services, pipes, and directives provided by the Angular team. The [`HttpClientModule`](api/common/http/HttpClientModule) is also here, in the [`@angular/common/http`](api/common/http) subfolder. For more information, see the [HttpClient guide](guide/http).
-**@angular/compiler** | Angular's template compiler. It understands templates and can convert them to code that makes the application run and render. Typically you don’t interact with the compiler directly; rather, you use it indirectly via `platform-browser-dynamic` when JIT compiling in the browser. For more information, see the [Ahead-of-time Compilation guide](guide/aot-compiler).
-[**@angular/core**](api/core) | Critical runtime parts of the framework that are needed by every application. Includes all metadata decorators, `Component`, `Directive`,  dependency injection, and the component lifecycle hooks.
-[**@angular/forms**](api/forms) | Support for both [template-driven](guide/forms) and [reactive forms](guide/reactive-forms). For information about choosing the best forms approach for your app, see [Introduction to forms](guide/forms-overview).
-[**@angular/http**](api/http) | Angular's legacy HTTP client, which was deprecated in version 5.0 in favor of [@angular/common/http](api/common/http).
-[**@angular/<br />platform&#8209;browser**](api/platform-browser) | Everything DOM and browser related, especially the pieces that help render into the DOM. This package also includes the `bootstrapModuleFactory()` method for bootstrapping applications for production builds that pre-compile with [AOT](guide/aot-compiler).
-[**@angular/<br />platform&#8209;browser&#8209;dynamic**](api/platform-browser-dynamic) | Includes [providers](api/core/Provider) and methods to compile and run the app on the client using the [JIT compiler](guide/aot-compiler).
-[**@angular/router**](api/router) | The router module navigates among your app pages when the browser URL changes. For more information, see [Routing and Navigation](guide/router).
+**@angular/core**: Critical runtime parts of the framework needed by every application.
+Includes all metadata decorators, `Component`, `Directive`,  dependency injection, and the component lifecycle hooks.
 
+**@angular/compiler**: Angular's *Template Compiler*.
+It understands templates and can convert them to code that makes the application run and render.
+Typically you don’t interact with the compiler directly; rather, you use it indirectly via `platform-browser-dynamic` when [JIT compiling](guide/aot-compiler) in the browser.
 
-{@a support-packages}
-### Support packages
+**@angular/forms**: support for both [template-driven](guide/forms) and [reactive forms](guide/reactive-forms).
 
-The following support packages are included as dependencies in the default `package.json` file for a new Angular workspace. 
+**@angular/http**: Angular's old, deprecated, HTTP client.
 
+**@angular/platform-browser**: Everything DOM and browser related, especially
+the pieces that help render into the DOM.
+This package also includes the `bootstrapModuleFactory()` method
+for bootstrapping applications for production builds that pre-compile with [AOT](guide/aot-compiler).
 
-Package name                               | Description
-----------------------------------------   | --------------------------------------------------
-[**rxjs**](https://github.com/ReactiveX/rxjs) | Many Angular APIs return [_observables_](guide/glossary#observable). RxJS is an implementation of the proposed [Observables specification](https://github.com/tc39/proposal-observable) currently before the [TC39](https://www.ecma-international.org/memento/tc39-m.htm) committee, which determines standards for the JavaScript language.
-[**zone.js**](https://github.com/angular/zone.js) | Angular relies on zone.js to run Angular's change detection processes when native JavaScript operations raise events.  Zone.js is an implementation of a [specification](https://gist.github.com/mhevery/63fdcdf7c65886051d55) currently before the [TC39](http://www.ecma-international.org/memento/TC39.htm) committee that determines standards for the JavaScript language.
+**@angular/platform-browser-dynamic**: Includes [Providers](api/core/Provider)
+and methods to compile and run the app on the client 
+using the [JIT compiler](guide/aot-compiler).
 
+**@angular/router**: The [router module](/guide/router) navigates among your app pages when the browser URL changes.
+
+**@angular/upgrade**: Set of utilities for upgrading AngularJS applications to Angular.
 
 {@a polyfills}
+
 ### Polyfill packages
 
 Many browsers lack native support for some features in the latest HTML standards,
 features that Angular requires.
-[_Polyfills_](https://en.wikipedia.org/wiki/Polyfill) can emulate the missing features.
+"[Polyfills](https://en.wikipedia.org/wiki/Polyfill)" can emulate the missing features.
 The [Browser Support](guide/browser-support) guide explains which browsers need polyfills and 
 how you can add them.
 
-The `package.json` for a new Angular workspace installs the [core-js](https://github.com/zloirock/core-js) package, 
+The default `package.json` installs the **[core-js](https://github.com/zloirock/core-js)** package
 which polyfills missing features for several popular browser.
 
+### Support packages
+
+**[rxjs](https://github.com/benlesh/RxJS)**: Many Angular APIs return _observables_. RxJS is an implementation of the proposed [Observables specification](https://github.com/zenparsing/es-observable) currently before the
+[TC39](http://www.ecma-international.org/memento/TC39.htm) committee that determines standards for the JavaScript language.
+
+
+**[zone.js](https://github.com/angular/zone.js)**: Angular relies on zone.js to run Angular's change detection processes when native JavaScript operations raise events.  Zone.js is an implementation of a [specification](https://gist.github.com/mhevery/63fdcdf7c65886051d55) currently before the
+[TC39](http://www.ecma-international.org/memento/TC39.htm) committee that determines standards for the JavaScript language.
+
 
 {@a dev-dependencies}
 
-## DevDependencies
+## *DevDependencies*
 
-The packages listed in the `devDependencies` section of `package.json` help you develop the application on your local machine. You don't deploy them with the production application.
+The packages listed in the *devDependencies* section of the `package.json` help you develop the application on your local machine.
 
-To add a new `devDependency`, use either one of the following commands:
+You don't deploy them with the production application although there is no harm in doing so.
 
-<code-example language="sh" class="code-shell">
-  npm install --dev &lt;package-name&gt;
-</code-example>
-
-<code-example language="sh" class="code-shell">
-  yarn add --dev &lt;package-name&gt;
-</code-example>
-
-The following `devDependencies` are provided in the default `package.json` file for a new Angular workspace. 
+**[@angular/cli](https://github.com/angular/angular-cli/)**: The Angular CLI tools.
 
 
-Package name                               | Description
-----------------------------------------   | -----------------------------------
-[**@angular&#8209;devkit/<br />build&#8209;angular**](https://github.com/angular/angular-cli/) | The Angular build tools.
-[**@angular/cli**](https://github.com/angular/angular-cli/) | The Angular CLI tools.
-**@angular/<br />compiler&#8209;cli** | The Angular compiler, which is invoked by the Angular CLI's `ng build` and `ng serve` commands.
-**@angular/<br />language&#8209;service** | The [Angular language service](guide/language-service) analyzes component templates and provides type and error information that TypeScript-aware editors can use to improve the developer's experience. For example, see the [Angular language service extension for VS Code](https://marketplace.visualstudio.com/items?itemName=Angular.ng-template).
-**@types/... ** | TypeScript definition files for 3rd party libraries such as Jasmine and Node.js.
-[**codelyzer**](https://www.npmjs.com/package/codelyzer) | A linter for Angular apps whose rules conform to the Angular [style guide](guide/styleguide).
-**jasmine/... ** | Packages to support the [Jasmine](https://jasmine.github.io/) test library.
-**karma/... ** | Packages to support the [karma](https://www.npmjs.com/package/karma) test runner.
-[**protractor**](https://www.npmjs.com/package/protractor) | An end-to-end (e2e) framework for Angular apps. Built on top of [WebDriverJS](https://github.com/SeleniumHQ/selenium/wiki/WebDriverJs).
-[**ts-node**](https://www.npmjs.com/package/ts-node) | TypeScript execution environment and REPL for Node.js.
-[**tslint**](https://www.npmjs.com/package/tslint) | A static analysis tool that checks TypeScript code for readability, maintainability, and functionality errors.
-[**typescript**](https://www.npmjs.com/package/typescript) | The TypeScript language server, including the *tsc* TypeScript compiler.
+**[@angular/compiler-cli](https://github.com/angular/angular/blob/master/packages/compiler-cli/README.md)**: The Angular compiler, which is invoked by the Angular CLI's `build` and `serve` commands.
 
 
-## Related information
+**[@angular/language-service](https://github.com/angular/angular-cli/)**: The Angular language service analyzes component templates and provides type and error information that TypeScript-aware editors can use to improve the developer's experience.
+For example, see the [Angular language service extension for VS Code](https://marketplace.visualstudio.com/items?itemName=Angular.ng-template)
 
- For information about how the Angular CLI handles packages see the following guides: 
- 
- * [Building and serving](guide/build) describes how packages come together to create a development build.
- * [Deployment](guide/deployment) describes how packages come together to create a production build.
+
+**@types/... **: TypeScript definition files for 3rd party libraries such as Jasmine and Node.js.
+
+
+**[codelyzer](https://www.npmjs.com/package/codelyzer)**: A linter for Angular apps whose rules conform to the Angular [style guide](guide/styleguide).
+
+
+**jasmine/... **: packages to support the [Jasmine](https://jasmine.github.io/) test library.
+
+
+**karma/... **: packages to support the [karma](https://www.npmjs.com/package/karma) test runner.
+
+
+**[protractor](https://www.npmjs.com/package/protractor)**: an end-to-end (e2e) framework for Angular apps. 
+Built on top of [WebDriverJS](https://github.com/SeleniumHQ/selenium/wiki/WebDriverJs).
+
+
+**[ts-node](https://www.npmjs.com/package/ts-node)**: TypeScript execution environment and REPL for Node.js.
+
+
+**[tslint](https://www.npmjs.com/package/tslint)**: a static analysis tool that checks TypeScript code for readability, maintainability, and functionality errors.
+
+
+**[typescript](https://www.npmjs.com/package/typescript)**:
+the TypeScript language server, including the *tsc* TypeScript compiler.
+
+
+## So many packages! So many files!
+
+The default `package.json` installs more packages than you'll need for your project.
+
+A given package may contain tens, hundreds, even thousands of files,
+all of them in your local machine's `node_modules` directory.
+The sheer volume of files is intimidating, 
+
+You can remove packages that you don't need but how can you be sure that you won't need it?
+As a practical matter, it's better to install a package you don't need than worry about it.
+Extra packages and package files on your local development machine are harmless.
+
+By default the Angular CLI build process bundles into a single file just the few "vendor" library files that your application actually needs.
+The browser downloads this bundle, not the original package files.
+
+See the [Deployment](guide/deployment) to learn more.

aio/content/guide/observables-in-angular.md

@@ -16,7 +16,7 @@ A good example of usage can be found on the [EventEmitter](https://angular.io/ap
 
 Here is the component definition:
 
-<code-example path="observables-in-angular/src/main.ts" header="EventEmitter" region="eventemitter"></code-example>
+<code-example path="observables-in-angular/src/main.ts" title="EventEmitter" region="eventemitter"></code-example>
 
 ## HTTP
 Angular’s `HttpClient` returns observables from HTTP method calls. For instance, `http.get(‘/api’)` returns an observable. This provides several advantages over promise-based HTTP APIs:
@@ -32,20 +32,20 @@ The [AsyncPipe](https://angular.io/api/common/AsyncPipe) subscribes to an observ
 
 The following example binds the `time` observable to the component's view. The observable continuously updates the view with the current time.
 
-<code-example path="observables-in-angular/src/main.ts" header="Using async pipe" region="pipe"></code-example>
+<code-example path="observables-in-angular/src/main.ts" title="Using async pipe" region="pipe"></code-example>
 
 ## Router
 
 [`Router.events`](https://angular.io/api/router/Router#events) provides events as observables. You can use the `filter()` operator from RxJS to look for events of interest, and subscribe to them in order to make decisions based on the sequence of events in the navigation process. Here's an example:
 
-<code-example path="observables-in-angular/src/main.ts" header="Router events" region="router"></code-example>
+<code-example path="observables-in-angular/src/main.ts" title="Router events" region="router"></code-example>
 
 The [ActivatedRoute](https://angular.io/api/router/ActivatedRoute) is an injected router service that makes use of observables to get information about a route path and parameters. For example, `ActivateRoute.url` contains an observable that reports the route path or paths. Here's an example:
 
-<code-example path="observables-in-angular/src/main.ts" header="ActivatedRoute" region="activated_route"></code-example>
+<code-example path="observables-in-angular/src/main.ts" title="ActivatedRoute" region="activated_route"></code-example>
 
 ## Reactive forms
 
 Reactive forms have properties that use observables to monitor form control values. The [`FormControl`](https://angular.io/api/forms/FormControl) properties `valueChanges` and `statusChanges` contain observables that raise change events. Subscribing to an observable form-control property is a way of triggering application logic within the component class. For example:
 
-<code-example path="observables-in-angular/src/main.ts" header="Reactive forms" region="forms"></code-example>
+<code-example path="observables-in-angular/src/main.ts" title="Reactive forms" region="forms"></code-example>

aio/content/guide/observables.md

@@ -17,7 +17,7 @@ To execute the observable you have created and begin receiving notifications, yo
 
 Here's an example that demonstrates the basic usage model by showing how an observable could be used to provide geolocation updates.
 
-<code-example path="observables/src/geolocation.ts" header="Observe geolocation updates"></code-example>
+<code-example path="observables/src/geolocation.ts" title="Observe geolocation updates"></code-example>
 
 ## Defining observers
 
@@ -49,11 +49,11 @@ Here's an example of creating and subscribing to a simple observable, with an ob
 <code-example
   path="observables/src/subscribing.ts"
   region="observer"
-  header="Subscribe using observer"></code-example>
+  title="Subscribe using observer"></code-example>
 
 Alternatively, the `subscribe()` method can accept callback function definitions in line, for `next`, `error`, and `complete` handlers. For example, the following `subscribe()` call is the same as the one that specifies the predefined observer:
 
-<code-example path="observables/src/subscribing.ts" region="sub_fn" header="Subscribe with positional arguments"></code-example>
+<code-example path="observables/src/subscribing.ts" region="sub_fn" title="Subscribe with positional arguments"></code-example>
 
 In either case, a `next` handler is required. The `error` and `complete` handlers are optional.
 
@@ -65,15 +65,15 @@ Use the `Observable` constructor to create an observable stream of any type. The
 
 For example, to create an observable equivalent to the `of(1, 2, 3)` above, you could do something like this:
 
-<code-example path="observables/src/creating.ts" region="subscriber" header="Create observable with constructor"></code-example>
+<code-example path="observables/src/creating.ts" region="subscriber" title="Create observable with constructor"></code-example>
 
 To take this example a little further, we can create an observable that publishes events. In this example, the subscriber function is defined inline.
 
-<code-example path="observables/src/creating.ts" region="fromevent" header="Create with custom fromEvent function"></code-example>
+<code-example path="observables/src/creating.ts" region="fromevent" title="Create with custom fromEvent function"></code-example>
 
 Now you can use this function to create an observable that publishes keydown events:
 
-<code-example path="observables/src/creating.ts" region="fromevent_use" header="Use custom fromEvent function"></code-example>
+<code-example path="observables/src/creating.ts" region="fromevent_use" title="Use custom fromEvent function"></code-example>
 
 ## Multicasting
 
@@ -87,15 +87,15 @@ When creating an observable you should determine how you want that observable to
 
 Let’s look at an example that counts from 1 to 3, with a one-second delay after each number emitted.
 
-<code-example path="observables/src/multicasting.ts" region="delay_sequence" header="Create a delayed sequence"></code-example>
+<code-example path="observables/src/multicasting.ts" region="delay_sequence" title="Create a delayed sequence"></code-example>
 
 Notice that if you subscribe twice, there will be two separate streams, each emitting values every second. It looks something like this:
 
-<code-example path="observables/src/multicasting.ts" region="subscribe_twice" header="Two subscriptions"></code-example>
+<code-example path="observables/src/multicasting.ts" region="subscribe_twice" title="Two subscriptions"></code-example>
 
  Changing the observable to be multicasting could look something like this:
 
-<code-example path="observables/src/multicasting.ts" region="multicast_sequence" header="Create a multicast subscriber"></code-example>
+<code-example path="observables/src/multicasting.ts" region="multicast_sequence" title="Create a multicast subscriber"></code-example>
 
 <div class="alert is-helpful">
    Multicasting observables take a bit more setup, but they can be useful for certain applications. Later we will look at tools that simplify the process of multicasting, allowing you to take any observable and make it multicasting.

aio/content/guide/pipes.md

@@ -26,7 +26,7 @@ In this page, you'll use pipes to transform a component's birthday property into
 a human-friendly date.
 
 
-<code-example path="pipes/src/app/hero-birthday1.component.ts" header="src/app/hero-birthday1.component.ts" linenums="false">
+<code-example path="pipes/src/app/hero-birthday1.component.ts" title="src/app/hero-birthday1.component.ts" linenums="false">
 
 </code-example>
 
@@ -35,7 +35,7 @@ a human-friendly date.
 Focus on the component's template.
 
 
-<code-example path="pipes/src/app/app.component.html" region="hero-birthday-template" header="src/app/app.component.html" linenums="false">
+<code-example path="pipes/src/app/app.component.html" region="hero-birthday-template" title="src/app/app.component.html" linenums="false">
 
 </code-example>
 
@@ -79,7 +79,7 @@ Modify the birthday template to give the date pipe a format parameter.
 After formatting the hero's April 15th birthday, it renders as **<samp>04/15/88</samp>**:
 
 
-<code-example path="pipes/src/app/app.component.html" region="format-birthday" header="src/app/app.component.html" linenums="false">
+<code-example path="pipes/src/app/app.component.html" region="format-birthday" title="src/app/app.component.html" linenums="false">
 
 </code-example>
 
@@ -95,7 +95,7 @@ Write a second component that *binds* the pipe's format parameter
 to the component's `format` property. Here's the template for that component:
 
 
-<code-example path="pipes/src/app/hero-birthday2.component.ts" region="template" header="src/app/hero-birthday2.component.ts (template)" linenums="false">
+<code-example path="pipes/src/app/hero-birthday2.component.ts" region="template" title="src/app/hero-birthday2.component.ts (template)" linenums="false">
 
 </code-example>
 
@@ -106,7 +106,7 @@ That method toggles the component's `format` property between a short form
 (`'shortDate'`) and a longer form (`'fullDate'`).
 
 
-<code-example path="pipes/src/app/hero-birthday2.component.ts" region="class" header="src/app/hero-birthday2.component.ts (class)" linenums="false">
+<code-example path="pipes/src/app/hero-birthday2.component.ts" region="class" title="src/app/hero-birthday2.component.ts (class)" linenums="false">
 
 </code-example>
 
@@ -143,7 +143,7 @@ the birthday is chained to the `DatePipe` and on to the `UpperCasePipe`.
 The birthday displays as **<samp>APR 15, 1988</samp>**.
 
 
-<code-example path="pipes/src/app/app.component.html" region="chained-birthday" header="src/app/app.component.html" linenums="false">
+<code-example path="pipes/src/app/app.component.html" region="chained-birthday" title="src/app/app.component.html" linenums="false">
 
 </code-example>
 
@@ -153,7 +153,7 @@ This example&mdash;which displays **<samp>FRIDAY, APRIL 15, 1988</samp>**&mdash;
 the same pipes as above, but passes in a parameter to `date` as well.
 
 
-<code-example path="pipes/src/app/app.component.html" region="chained-parameter-birthday" header="src/app/app.component.html" linenums="false">
+<code-example path="pipes/src/app/app.component.html" region="chained-parameter-birthday" title="src/app/app.component.html" linenums="false">
 
 </code-example>
 
@@ -166,7 +166,7 @@ You can write your own custom pipes.
 Here's a custom pipe named `ExponentialStrengthPipe` that can boost a hero's powers:
 
 
-<code-example path="pipes/src/app/exponential-strength.pipe.ts" header="src/app/exponential-strength.pipe.ts" linenums="false">
+<code-example path="pipes/src/app/exponential-strength.pipe.ts" title="src/app/exponential-strength.pipe.ts" linenums="false">
 
 </code-example>
 
@@ -200,7 +200,7 @@ Technically, it's optional; Angular looks for and executes the `transform` metho
 
 Now you need a component to demonstrate the pipe.
 
-<code-example path="pipes/src/app/power-booster.component.ts" header="src/app/power-booster.component.ts" linenums="false">
+<code-example path="pipes/src/app/power-booster.component.ts" title="src/app/power-booster.component.ts" linenums="false">
 </code-example>
 
 <figure>
@@ -223,7 +223,7 @@ Note the following:
 
 You must register custom pipes.
 If you don't, Angular reports an error.
-The [Angular CLI's](cli) generator registers the pipe automatically.
+Angular CLI's generator registers the pipe automatically.
 
 
 </div>
@@ -240,7 +240,7 @@ Upgrade the example to a "Power Boost Calculator" that combines
 your pipe and two-way data binding with `ngModel`.
 
 
-<code-example path="pipes/src/app/power-boost-calculator.component.ts" header="src/app/power-boost-calculator.component.ts">
+<code-example path="pipes/src/app/power-boost-calculator.component.ts" title="src/app/power-boost-calculator.component.ts">
 
 </code-example>
 
@@ -270,7 +270,7 @@ In the next example, the component uses the default, aggressive change detection
 its display of every hero in the `heroes` array. Here's the template:
 
 
-<code-example path="pipes/src/app/flying-heroes.component.html" region="template-1" header="src/app/flying-heroes.component.html (v1)" linenums="false">
+<code-example path="pipes/src/app/flying-heroes.component.html" region="template-1" title="src/app/flying-heroes.component.html (v1)" linenums="false">
 
 </code-example>
 
@@ -278,7 +278,7 @@ its display of every hero in the `heroes` array. Here's the template:
 
 The companion component class provides heroes, adds heroes into the array, and can reset the array.
 
-<code-example path="pipes/src/app/flying-heroes.component.ts" region="v1" header="src/app/flying-heroes.component.ts (v1)" linenums="false">
+<code-example path="pipes/src/app/flying-heroes.component.ts" region="v1" title="src/app/flying-heroes.component.ts (v1)" linenums="false">
 
 </code-example>
 
@@ -292,7 +292,7 @@ If you added the ability to remove or change a hero, Angular would detect those
 
 Add a `FlyingHeroesPipe` to the `*ngFor` repeater that filters the list of heroes to just those heroes who can fly.
 
-<code-example path="pipes/src/app/flying-heroes.component.html" region="template-flying-heroes" header="src/app/flying-heroes.component.html (flyers)" linenums="false">
+<code-example path="pipes/src/app/flying-heroes.component.html" region="template-flying-heroes" title="src/app/flying-heroes.component.html (flyers)" linenums="false">
 
 </code-example>
 
@@ -300,7 +300,7 @@ Add a `FlyingHeroesPipe` to the `*ngFor` repeater that filters the list of heroe
 
 Here's the `FlyingHeroesPipe` implementation, which follows the pattern for custom pipes described earlier.
 
-<code-example path="pipes/src/app/flying-heroes.pipe.ts" region="pure" header="src/app/flying-heroes.pipe.ts" linenums="false">
+<code-example path="pipes/src/app/flying-heroes.pipe.ts" region="pure" title="src/app/flying-heroes.pipe.ts" linenums="false">
 
 </code-example>
 
@@ -314,7 +314,7 @@ It's just using a different change-detection algorithm that ignores changes to t
 
 Notice how a hero is added:
 
-<code-example path="pipes/src/app/flying-heroes.component.ts" region="push" header="src/app/flying-heroes.component.ts" linenums="false">
+<code-example path="pipes/src/app/flying-heroes.component.ts" region="push" title="src/app/flying-heroes.component.ts" linenums="false">
 
 </code-example>
 
@@ -364,7 +364,7 @@ You make a pipe impure by setting its pure flag to false. You could make the `Fl
 impure like this:
 
 
-<code-example path="pipes/src/app/flying-heroes.pipe.ts" region="pipe-decorator" header="src/app/flying-heroes.pipe.ts" linenums="false">
+<code-example path="pipes/src/app/flying-heroes.pipe.ts" region="pipe-decorator" title="src/app/flying-heroes.pipe.ts" linenums="false">
 
 </code-example>
 
@@ -422,11 +422,11 @@ The complete implementation is as follows:
 
 <code-tabs>
 
-  <code-pane header="FlyingHeroesImpurePipe" path="pipes/src/app/flying-heroes.pipe.ts" region="impure">
+  <code-pane title="FlyingHeroesImpurePipe" path="pipes/src/app/flying-heroes.pipe.ts" region="impure">
 
   </code-pane>
 
-  <code-pane header="FlyingHeroesPipe" path="pipes/src/app/flying-heroes.pipe.ts" region="pure">
+  <code-pane title="FlyingHeroesPipe" path="pipes/src/app/flying-heroes.pipe.ts" region="pure">
 
   </code-pane>
 
@@ -440,7 +440,7 @@ The only difference is the `pure` flag in the pipe metadata.
 This is a good candidate for an impure pipe because the `transform` function is trivial and fast.
 
 
-<code-example path="pipes/src/app/flying-heroes.pipe.ts" linenums="false" header="src/app/flying-heroes.pipe.ts (filter)" region="filter">
+<code-example path="pipes/src/app/flying-heroes.pipe.ts" linenums="false" title="src/app/flying-heroes.pipe.ts (filter)" region="filter">
 
 </code-example>
 
@@ -449,7 +449,7 @@ This is a good candidate for an impure pipe because the `transform` function is
 You can derive a `FlyingHeroesImpureComponent` from `FlyingHeroesComponent`.
 
 
-<code-example path="pipes/src/app/flying-heroes-impure.component.html" linenums="false" header="src/app/flying-heroes-impure.component.html (excerpt)" region="template-flying-heroes">
+<code-example path="pipes/src/app/flying-heroes-impure.component.html" linenums="false" title="src/app/flying-heroes-impure.component.html (excerpt)" region="template-flying-heroes">
 
 </code-example>
 
@@ -476,7 +476,7 @@ This next example binds an `Observable` of message strings
 (`message$`) to a view with the `async` pipe.
 
 
-<code-example path="pipes/src/app/hero-async-message.component.ts" header="src/app/hero-async-message.component.ts">
+<code-example path="pipes/src/app/hero-async-message.component.ts" title="src/app/hero-async-message.component.ts">
 
 </code-example>
 
@@ -499,7 +499,7 @@ In the following code, the pipe only calls the server when the request URL chang
 The code uses the [Angular http](guide/http) client to retrieve data:
 
 
-<code-example path="pipes/src/app/fetch-json.pipe.ts" header="src/app/fetch-json.pipe.ts">
+<code-example path="pipes/src/app/fetch-json.pipe.ts" title="src/app/fetch-json.pipe.ts">
 
 </code-example>
 
@@ -509,7 +509,7 @@ Now demonstrate it in a harness component whose template defines two bindings to
 both requesting the heroes from the `heroes.json` file.
 
 
-<code-example path="pipes/src/app/hero-list.component.ts" header="src/app/hero-list.component.ts">
+<code-example path="pipes/src/app/hero-list.component.ts" title="src/app/hero-list.component.ts">
 
 </code-example>
 

aio/content/guide/practical-observable-usage.md

@@ -14,10 +14,10 @@ Observables can simplify the implementation of type-ahead suggestions. Typically
 
 Writing this in full JavaScript can be quite involved. With observables, you can use a simple series of RxJS operators:
 
-<code-example path="practical-observable-usage/src/typeahead.ts" header="Typeahead"></code-example>
+<code-example path="practical-observable-usage/src/typeahead.ts" title="Typeahead"></code-example>
 
 ## Exponential backoff
 
 Exponential backoff is a technique in which you retry an API after failure, making the time in between retries longer after each consecutive failure, with a maximum number of retries after which the request is considered to have failed. This can be quite complex to implement with promises and other methods of tracking AJAX calls. With observables, it is very easy:
 
-<code-example path="practical-observable-usage/src/backoff.ts" header="Exponential backoff"></code-example>
+<code-example path="practical-observable-usage/src/backoff.ts" title="Exponential backoff"></code-example>

aio/content/guide/providers.md

@@ -13,7 +13,7 @@ A provider is an instruction to the DI system on how to obtain a value for a dep
 
 ## Providing a service
 
-If you already have an app that was created with the [Angular CLI](cli), you can create a service using the [`ng generate`](cli/generate) CLI command in the root project directory. Replace _User_ with the name of your service.
+If you already have a CLI generated app, create a service using the following CLI command in the root project directory. Replace _User_ with the name of your service.
 
 ```sh
 ng generate service User
@@ -21,7 +21,7 @@ ng generate service User
 
 This command creates the following `UserService` skeleton:
 
-<code-example path="providers/src/app/user.service.0.ts"  header="src/app/user.service.0.ts" linenums="false"> </code-example>
+<code-example path="providers/src/app/user.service.0.ts"  title="src/app/user.service.0.ts" linenums="false"> </code-example>
 
 You can now inject `UserService` anywhere in your application. 
 
@@ -38,15 +38,15 @@ You should always provide your service in the root injector unless there is a ca
 
 It's also possible to specify that a service should be provided in a particular `@NgModule`. For example, if you don't want `UserService` to be available to applications unless they import a `UserModule` you've created, you can specify that the service should be provided in the module:
 
-<code-example path="providers/src/app/user.service.1.ts"  header="src/app/user.service.1.ts" linenums="false">  </code-example>
+<code-example path="providers/src/app/user.service.1.ts"  title="src/app/user.service.1.ts" linenums="false">  </code-example>
 
 The example above shows the preferred way to provide a service in a module. This method is preferred because it enables tree-shaking of the service if nothing injects it. If it's not possible to specify in the service which module should provide it, you can also declare a provider for the service within the module:
 
-<code-example path="providers/src/app/user.module.ts"  header="src/app/user.module.ts" linenums="false">  </code-example>
+<code-example path="providers/src/app/user.module.ts"  title="src/app/user.module.ts" linenums="false">  </code-example>
 
 ## Limiting provider scope by lazy loading modules
 
-In the basic CLI-generated app, modules are eagerly loaded which means that they are all loaded when the app launches. Angular uses an injector system to make things available between modules. In an eagerly loaded app, the root application injector makes all of the providers in all of the modules available throughout the app.
+In the basic CLI generated app, modules are eagerly loaded which means that they are all loaded when the app launches. Angular uses an injector system to make things available between modules. In an eagerly loaded app, the root application injector makes all of the providers in all of the modules available throughout the app.
 
 This behavior necessarily changes when you use lazy loading. Lazy loading is when you load modules only when you need them; for example, when routing. They aren’t loaded right away like with eagerly loaded modules. This means that any services listed in their provider arrays aren’t available because the root injector doesn’t know about these modules.
 
@@ -67,7 +67,7 @@ method is helpful for when you want to eagerly load a module that needs a servic
 Providing a service in the component limits the service only to that component (other components in
 the same module can’t access it.)
 
-<code-example path="providers/src/app/app.component.ts" region="component-providers" header="src/app/app.component.ts" linenums="false">
+<code-example path="providers/src/app/app.component.ts" region="component-providers" title="src/app/app.component.ts" linenums="false">
 </code-example>
 
 

aio/content/guide/quickstart.md

@@ -1,51 +1,46 @@
-# Getting started 
+# Getting Started
 
-Welcome to Angular! Angular helps you build modern applications for the web, mobile, or desktop.  
+Good tools make application development quicker and easier to maintain than
+if you did everything by hand.
 
-This guide shows you how to build and run a simple Angular
-app. You'll use the [Angular CLI tool](cli "CLI command reference") to accelerate development, 
-while adhering to the [Style Guide](guide/styleguide "Angular style guide") recommendations that
+The [**Angular CLI**](https://cli.angular.io/) is a **_command line interface_** tool
+that can create a project, add files, and perform a variety of ongoing development tasks such
+as testing, bundling, and deployment.
+
+The goal in this guide is to build and run a simple Angular
+application in TypeScript, using the Angular CLI
+while adhering to the [Style Guide](guide/styleguide) recommendations that
 benefit _every_ Angular project.
 
-This guide takes less than 30 minutes to complete. 
-At the end of this guide—as part of final code review—there is a link to download a copy of the final application code. (If you don't execute the commands in this guide, you can still download the final application code.)
+By the end of the chapter, you'll have a basic understanding of development with the CLI
+and a foundation for both these documentation samples and for real world applications.
+
+And you can also <a href="generated/zips/cli-quickstart/cli-quickstart.zip" target="_blank">download the example.</a>
+
+<h2 id='devenv'>
+  Step 1. Set up the Development Environment
+</h2>
 
 
-{@a devenv}
-{@a prerequisites}
-## Prerequisites 
 
-Before you begin, make sure your development environment includes `Node.js®` and an npm package manager. 
+You need to set up your development environment before you can do anything.
 
-{@a nodejs}
-### Node.js
+Install **[Node.js® and npm](https://nodejs.org/en/download/)**
+if they are not already on your machine.
 
-Angular requires `Node.js` version 8.x or 10.x.
-
-* To check your version, run `node -v` in a terminal/console window.
-
-* To get `Node.js`, go to [nodejs.org](https://nodejs.org "Nodejs.org").
-
-{@a npm}
-### npm package manager
-
-Angular, the Angular CLI, and Angular apps depend on features and functionality provided by libraries that are available as [npm packages](https://docs.npmjs.com/getting-started/what-is-npm). To download and install npm packages, you must have an npm package manager. 
-
-This Quick Start uses the [npm client](https://docs.npmjs.com/cli/install) command line interface, which is installed with `Node.js` by default. 
-
-To check that you have the npm client installed, run `npm -v` in a terminal/console window.
+<div class="alert is-helpful">
 
 
-{@a install-cli}
 
-## Step 1: Install the Angular CLI
+**Verify that you are running at least Node.js version `8.x` or greater and npm version `5.x` or greater**
+by running `node -v` and `npm -v` in a terminal/console window.
+Older versions produce errors, but newer versions are fine.
 
-You use the Angular CLI 
-to create projects, generate application and library code, and perform a variety of ongoing development tasks such as testing, bundling, and deployment.
+</div>
 
-Install the Angular CLI globally. 
 
-To install the CLI using `npm`, open a terminal/console window and enter the following command:
+
+Then install the [Angular CLI](https://github.com/angular/angular-cli) globally.
 
 
 <code-example language="sh" class="code-shell">
@@ -55,86 +50,101 @@ To install the CLI using `npm`, open a terminal/console window and enter the fol
 
 
 
-{@a create-proj}
 
-## Step 2: Create a workspace and initial application
+<h2 id='create-proj'>
+  Step 2. Create a new project
+</h2>
 
-You develop apps in the context of an Angular [**workspace**](guide/glossary#workspace). A workspace contains the files for one or more [**projects**](guide/glossary/#project). A project is the set of files that comprise an app, a library, or end-to-end (e2e) tests. 
 
-To create a new workspace and initial app project: 
 
-1. Run the CLI command `ng new` and provide the name `my-app`, as shown here: 
+Open a terminal window.
 
-    <code-example language="sh" class="code-shell">
-      ng new my-app
 
-    </code-example>
+Generate a new project and default app by running the following command:
 
-2. The `ng new` command prompts you for information about features to include in the initial app project. Accept the defaults by pressing the Enter or Return key. 
 
-The Angular CLI installs the necessary Angular npm packages and other dependencies. This can take a few minutes. 
+<code-example language="sh" class="code-shell">
+  ng new my-app
 
-It also creates the following workspace and starter project files: 
+</code-example>
 
-* A new workspace, with a root folder named `my-app`
-* An initial skeleton app project, also called `my-app` (in the `src` subfolder)
-* An end-to-end test project (in the `e2e` subfolder)
-* Related configuration files
 
-The initial app project contains a simple Welcome app, ready to run. 
+The Angular CLI installs the necessary npm packages, creates the project files, and populates the project with a simple default app. This can take some time.
 
-{@a serve}
 
-## Step 3: Serve the application
 
-Angular includes a server, so that you can easily build and serve your app locally.
+<div class="alert is-helpful">
 
-1. Go to the workspace folder (`my-app`).
 
-1. Launch the server by using the CLI command `ng serve`, with the `--open` option.
+
+You can add pre-packaged functionality to a new project by using the `ng add` command. The `ng add` command transforms a project by applying the schematics in the specified package. 
+For more information, see the [Angular CLI documentation.](https://github.com/angular/angular-cli/wiki/add "Angular CLI documentation") 
+
+Angular Material provides schematics for typical app layouts. 
+See the [Angular Material documentation](https://material.angular.io/guides "Angular Material documentation") for details.
+
+
+</div>
+
+
+<h2 id='serve'>
+  Step 3: Serve the application
+</h2>
+
+
+
+Go to the project directory and launch the server.
+
 
 <code-example language="sh" class="code-shell">
   cd my-app
   ng serve --open
 </code-example>
 
+
+
 The `ng serve` command launches the server, watches your files,
 and rebuilds the app as you make changes to those files.
 
-The `--open` (or just `-o`) option automatically opens your browser
-to `http://localhost:4200/`.
+Using the `--open` (or just `-o`) option will automatically open your browser
+on `http://localhost:4200/`.
 
 Your app greets you with a message:
 
 
 <figure>
-  <img src='generated/images/guide/cli-quickstart/app-works.png' alt="Welcome to my-app!">
+  <img src='generated/images/guide/cli-quickstart/app-works.png' alt="The app works!">
 </figure>
 
 
 
-{@a first-component}
 
-## Step 4: Edit your first Angular component
+<h2 id='first-component'>
+  Step 4: Edit your first Angular component
+</h2>
 
-[**_Components_**](guide/glossary#component) are the fundamental building blocks of Angular applications. 
-They display data on the screen, listen for user input, and take action based on that input. 
 
-As part of the initial app, the CLI created the first Angular component for you. It is the _root component_, and it is named `app-root`. 
 
-1. Open `./src/app/app.component.ts`. 
+The CLI created the first Angular component for you.
+This is the _root component_ and it is named `app-root`.
+You can find it in `./src/app/app.component.ts`.
 
-2. Change the `title` property from `'my-app'` to `'My First Angular App'`.
 
-    <code-example path="cli-quickstart/src/app/app.component.ts" region="component" header="src/app/app.component.ts" linenums="false"></code-example>
+Open the component file and change the `title` property from `'app'` to `'My First Angular App!'`.
 
-    The browser reloads automatically with the revised title. That's nice, but it could look better.
 
-3. Open `./src/app/app.component.css` and give the component some style.
+<code-example path="cli-quickstart/src/app/app.component.ts" region="title" title="src/app/app.component.ts" linenums="false"></code-example>
+
+
+
+The browser reloads automatically with the revised title. That's nice, but it could look better.
+
+Open `src/app/app.component.css` and give the component some style.
+
+
+<code-example path="cli-quickstart/src/app/app.component.css" title="src/app/app.component.css" linenums="false"></code-example>
 
-    <code-example path="cli-quickstart/src/app/app.component.css" header="src/app/app.component.css" linenums="false"></code-example>
 
-Looking good! 
 
 <figure>
   <img src='generated/images/guide/cli-quickstart/my-first-app.png' alt="Output of Getting Started app">
@@ -142,43 +152,490 @@ Looking good!
 
 
 
-
-{@a project-file-review}
-
-## Final code review
-
-You can <a href="generated/zips/cli-quickstart/cli-quickstart.zip" target="_blank">download an example</a> of the app that you created in this Getting Started guide. 
+Looking good!
 
 
-<div class="alert is-helpful">
 
-**Tip:** Most Angular guides include links to download example files and run live examples in [Stackblitz](http://www.stackblitz.com), so that you can see Angular concepts and code in action. 
+## What's next?
+That's about all you'd expect to do in a "Hello, World" app.
+
+You're ready to take the [Tour of Heroes Tutorial](tutorial) and build
+a small application that demonstrates the great things you can build with Angular.
+
+Or you can stick around a bit longer to learn about the files in your brand new project.
 
 
+
+## Project file review
+
+An Angular CLI project is the foundation for both quick experiments and enterprise solutions.
+
+The first file you should check out is `README.md`.
+It has some basic information on how to use CLI commands.
+Whenever you want to know more about how Angular CLI works make sure to visit
+[the Angular CLI repository](https://github.com/angular/angular-cli) and
+[Wiki](https://github.com/angular/angular-cli/wiki).
+
+Some of the generated files might be unfamiliar to you.
+
+
+
+### The `src` folder
+Your app lives in the `src` folder.
+All Angular components, templates, styles, images, and anything else your app needs go here.
+Any files outside of this folder are meant to support building your app.
+
+
+<div class='filetree'>
+  <div class='file'>src</div>
+  <div class='children'>
+    <div class='file'>app</div>
+    <div class='children'>
+      <div class='file'>app.component.css</div>
+      <div class='file'>app.component.html</div>
+      <div class="file">app.component.spec.ts</div>
+      <div class="file">app.component.ts</div>
+      <div class="file">app.module.ts</div>
+    </div>
+    <div class="file">assets</div>
+    <div class='children'>
+      <div class="file">.gitkeep</div>
+    </div>
+    <div class="file">environments</div>
+    <div class='children'>
+      <div class="file">environment.prod.ts</div>
+      <div class="file">environment.ts</div>
+    </div>
+    <div class="file">browserslist</div>
+    <div class="file">favicon.ico</div>
+    <div class="file">index.html</div>
+    <div class="file">karma.conf.js</div>
+    <div class="file">main.ts</div>
+    <div class="file">polyfills.ts</div>
+    <div class="file">styles.css</div>
+    <div class="file">test.ts</div>
+    <div class="file">tsconfig.app.json</div>
+    <div class="file">tsconfig.spec.json</div>
+    <div class="file">tslint.json</div>
+  </div>
 </div>
 
 
-For more information about Angular project files and the file structure, see [Workspace and project file struture](guide/file-structure).
+
+<style>
+  td, th {vertical-align: top}
+</style>
 
 
 
+<table width="100%">
+  <col width="20%">
+  </col>
+  <col width="80%">
+  </col>
+  <tr>
+    <th>
+      File
+    </th>
+    <th>
+      Purpose
+    </th>
+  </tr>
+  <tr>
+    <td>
 
-## Next steps
+      `app/app.component.{ts,html,css,spec.ts}`
 
-Now that you've seen the essentials of an Angular app and the Angular CLI, continue with these other introductory materials: 
+    </td>
+    <td>
 
-* The [Tour of Heroes tutorial](tutorial "Tour of Heroes tutorial") provides additional hands-on learning. It walks you through the steps to build an app that helps a staffing agency manage a group of superhero employees. 
-It has many of the features you'd expect to find in a data-driven application: 
+      Defines the `AppComponent` along with an HTML template, CSS stylesheet, and a unit test.
+      It is the **root** component of what will become a tree of nested components
+      as the application evolves.
 
-        - Acquiring and displaying a list of items
+    </td>
+  </tr>
+  <tr>
+    <td>
 
-        - Editing a selected item's detail
+      `app/app.module.ts`
 
-        - Navigating among different views of the data
+    </td>
+    <td>
+
+      Defines `AppModule`, the [root module](guide/bootstrapping "AppModule: the root module") that tells Angular how to assemble the application.
+      Right now it declares only the `AppComponent`.
+      Soon there will be more components to declare.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `assets/*`
+
+    </td>
+    <td>
+
+      A folder where you can put images and anything else to be copied wholesale
+      when you build your application.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `environments/*`
+
+    </td>
+    <td>
+
+      This folder contains one file for each of your destination environments,
+      each exporting simple configuration variables to use in your application.
+      The files are replaced on-the-fly when you build your app.
+      You might use a different API endpoint for development than you do for production
+      or maybe different analytics tokens.
+      You might even use some mock services.
+      Either way, the CLI has you covered.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `browserslist`
+
+    </td>
+    <td>
+
+      A configuration file to share [target browsers](https://github.com/browserslist/browserslist) between different front-end tools.
+
+    </td>
+  </tr>  
+  <tr>
+    <td>
+
+      `favicon.ico`
+
+    </td>
+    <td>
+
+      Every site wants to look good on the bookmark bar.
+      Get started with your very own Angular icon.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `index.html`
+
+    </td>
+    <td>
+
+      The main HTML page that is served when someone visits your site.
+      Most of the time you'll never need to edit it.
+      The CLI automatically adds all `js` and `css` files when building your app so you
+      never need to add any `<script>` or `<link>` tags here manually.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `karma.conf.js`
+
+    </td>
+    <td>
+
+      Unit test configuration for the [Karma test runner](https://karma-runner.github.io),
+      used when running `ng test`.
+
+    </td>
+  </tr>  
+  <tr>
+    <td>
+
+      `main.ts`
+
+    </td>
+    <td>
+
+      The main entry point for your app.
+      Compiles the application with the [JIT compiler](guide/glossary#jit)
+      and bootstraps the application's root module (`AppModule`) to run in the browser.
+      You can also use the [AOT compiler](guide/aot-compiler)
+      without changing any code by appending the`--aot` flag to the `ng build` and `ng serve` commands.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `polyfills.ts`
+
+    </td>
+    <td>
+
+      Different browsers have different levels of support of the web standards.
+      Polyfills help normalize those differences.
+      You should be pretty safe with `core-js` and `zone.js`, but be sure to check out
+      the [Browser Support guide](guide/browser-support) for more information.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `styles.css`
+
+    </td>
+    <td>
+
+      Your global styles go here.
+      Most of the time you'll want to have local styles in your components for easier maintenance,
+      but styles that affect all of your app need to be in a central place.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `test.ts`
+
+    </td>
+    <td>
+
+      This is the main entry point for your unit tests.
+      It has some custom configuration that might be unfamiliar, but it's not something you'll
+      need to edit.
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `tsconfig.{app|spec}.json`
+    </td>
+    <td>
+
+      TypeScript compiler configuration for the Angular app (`tsconfig.app.json`)
+      and for the unit tests (`tsconfig.spec.json`).
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `tslint.json`
+
+    </td>
+    <td>
+
+      Additional Linting configuration for [TSLint](https://palantir.github.io/tslint/) together with
+      [Codelyzer](http://codelyzer.com/), used when running `ng lint`.
+      Linting helps keep your code style consistent.
+
+    </td>
+  </tr>  
+</table>
+
+### The root folder
+
+The `src/` folder is just one of the items inside the project's root folder.
+Other files help you build, test, maintain, document, and deploy the app.
+These files go in the root folder next to `src/`.
 
 
-* The [Architecture guide](guide/architecture "Architecture guide") describes key concepts such as modules, components, services, and dependency injection (DI). It provides a foundation for more in-depth guides about specific Angular concepts and features.  
+<div class='filetree'>
+  <div class="file">my-app</div>
+  <div class='children'>
+    <div class="file">e2e</div>
+    <div class='children'>
+      <div class="file">src</div>
+      <div class='children'>
+        <div class="file">app.e2e-spec.ts</div>
+        <div class="file">app.po.ts</div>
+      </div>      
+      <div class="file">tsconfig.e2e.json</div>
+      <div class="file">protractor.conf.js</div>
+    </div>
+    <div class="file">node_modules/...</div>
+    <div class="file">src/...</div>
+    <div class='children'>
+      <div class="file">karma.conf.js</div>
+    </div>    
+    <div class="file">.editorconfig</div>
+    <div class="file">.gitignore</div>
+    <div class="file">angular.json</div>
+    <div class="file">package.json</div>
+    <div class="file">README.md</div>
+    <div class="file">tsconfig.json</div>
+    <div class="file">tslint.json</div>
+  </div>
+</div>
 
-After the Tutorial and Architecture guide, you'll be ready to continue exploring Angular on your own through the other guides and references in this documentation set, focusing on the features most important for your apps. 
+<style>
+  td, th {vertical-align: top}
+</style>
 
 
+
+<table width="100%">
+  <col width="20%">
+  </col>
+  <col width="80%">
+  </col>
+  <tr>
+    <th>
+      File
+    </th>
+    <th>
+      Purpose
+    </th>
+  </tr>
+  <tr>
+    <td>
+
+      `e2e/`
+
+    </td>
+    <td>
+
+      Inside `e2e/` live the end-to-end tests.
+      They shouldn't be inside `src/` because e2e tests are really a separate app that
+      just so happens to test your main app.
+      That's also why they have their own `tsconfig.e2e.json`.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `node_modules/`
+
+    </td>
+    <td>
+
+      `Node.js` creates this folder and puts all third party modules listed in
+      `package.json` inside of it.
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `.editorconfig`
+
+    </td>
+    <td>
+
+      Simple configuration for your editor to make sure everyone that uses your project
+      has the same basic configuration.
+      Most editors support an `.editorconfig` file.
+      See http://editorconfig.org for more information.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `.gitignore`
+
+    </td>
+    <td>
+
+      Git configuration to make sure autogenerated files are not committed to source control.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `angular.json`
+
+    </td>
+    <td>
+
+      Configuration for Angular CLI.
+      In this file you can set several defaults and also configure what files are included
+      when your project is built.
+      Check out the official documentation if you want to know more.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `package.json`
+
+    </td>
+    <td>
+
+      `npm` configuration listing the third party packages your project uses.
+      You can also add your own [custom scripts](https://docs.npmjs.com/misc/scripts) here.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `protractor.conf.js`
+
+    </td>
+    <td>
+
+      End-to-end test configuration for [Protractor](http://www.protractortest.org/),
+      used when running `ng e2e`.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `README.md`
+
+    </td>
+    <td>
+
+      Basic documentation for your project, pre-filled with CLI command information.
+      Make sure to enhance it with project documentation so that anyone
+      checking out the repo can build your app!
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `tsconfig.json`
+
+    </td>
+    <td>
+
+      TypeScript compiler configuration for your IDE to pick up and give you helpful tooling.
+
+    </td>
+  </tr>
+  <tr>
+    <td>
+
+      `tslint.json`
+
+    </td>
+    <td>
+
+      Linting configuration for [TSLint](https://palantir.github.io/tslint/) together with
+      [Codelyzer](http://codelyzer.com/), used when running `ng lint`.
+      Linting helps keep your code style consistent.
+
+    </td>
+  </tr>
+</table>
+
+<div class="alert is-helpful">
+
+### Next Step
+
+If you're new to Angular, continue with the
+[tutorial](tutorial "Tour of Heroes tutorial").
+You can skip the "Setup" step since you're already using the Angular CLI setup.
+
+</div>

aio/content/guide/reactive-forms.md

@@ -26,7 +26,7 @@ This section describes how to add a single form control. In the example, the use
 
 To use reactive forms, import `ReactiveFormsModule` from the `@angular/forms` package and add it to your NgModule's `imports` array.
 
-<code-example path="reactive-forms/src/app/app.module.ts" region="imports" header="src/app/app.module.ts (excerpt)">
+<code-example path="reactive-forms/src/app/app.module.ts" region="imports" title="src/app/app.module.ts (excerpt)">
 
 </code-example>
 
@@ -42,7 +42,7 @@ Generate a component for the control.
 
 The `FormControl` class is the basic building block when using reactive forms. To register a single form control, import the `FormControl` class into your component and create a new instance of the form control to save as a class property.
 
-<code-example path="reactive-forms/src/app/name-editor/name-editor.component.ts" region="create-control" header="src/app/name-editor/name-editor.component.ts">
+<code-example path="reactive-forms/src/app/name-editor/name-editor.component.ts" region="create-control" title="src/app/name-editor/name-editor.component.ts">
 
 </code-example>
 
@@ -52,7 +52,7 @@ Use the constructor of `FormControl` to set its initial value, which in this cas
 
 After you create the control in the component class, you must associate it with a form control element in the template. Update the template with the form control using the `formControl` binding provided by `FormControlDirective` included in `ReactiveFormsModule`.
 
-<code-example path="reactive-forms/src/app/name-editor/name-editor.component.html" region="control-binding" linenums="false" header="src/app/name-editor/name-editor.component.html">
+<code-example path="reactive-forms/src/app/name-editor/name-editor.component.html" region="control-binding" linenums="false" title="src/app/name-editor/name-editor.component.html">
 
 </code-example>
 
@@ -68,7 +68,7 @@ Using the template binding syntax, the form control is now registered to the `na
 
 The form control assigned to `name` is displayed when the component is added to a template. 
 
-<code-example path="reactive-forms/src/app/app.component.1.html" region="app-name-editor" linenums="false" header="src/app/app.component.html (name editor)">
+<code-example path="reactive-forms/src/app/app.component.1.html" region="app-name-editor" linenums="false" title="src/app/app.component.html (name editor)">
 
 </code-example>
 
@@ -92,7 +92,7 @@ You can display the value in these ways:
 
 The following example shows you how to display the current value using interpolation in the template.
 
-<code-example path="reactive-forms/src/app/name-editor/name-editor.component.html" region="display-value" linenums="false" header="src/app/name-editor/name-editor.component.html (control value)">
+<code-example path="reactive-forms/src/app/name-editor/name-editor.component.html" region="display-value" linenums="false" title="src/app/name-editor/name-editor.component.html (control value)">
 
 </code-example>
 
@@ -108,13 +108,13 @@ Reactive forms have methods to change a control's value programmatically, which
 
 The following example adds a method to the component class to update the value of the control to *Nancy* using the `setValue()` method.
 
-<code-example path="reactive-forms/src/app/name-editor/name-editor.component.ts" region="update-value" header="src/app/name-editor/name-editor.component.ts (update value)">
+<code-example path="reactive-forms/src/app/name-editor/name-editor.component.ts" region="update-value" title="src/app/name-editor/name-editor.component.ts (update value)">
 
 </code-example>
 
 Update the template with a button to simulate a name update. When you click the **Update Name** button, the value entered in the form control element is reflected as its current value. 
 
-<code-example path="reactive-forms/src/app/name-editor/name-editor.component.html" region="update-value" linenums="false" header="src/app/name-editor/name-editor.component.html (update value)">
+<code-example path="reactive-forms/src/app/name-editor/name-editor.component.html" region="update-value" linenums="false" title="src/app/name-editor/name-editor.component.html (update value)">
 
 </code-example>
 
@@ -142,7 +142,7 @@ Generate a `ProfileEditor` component and import the `FormGroup` and `FormControl
 
 </code-example>
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="imports" header="src/app/profile-editor/profile-editor.component.ts (imports)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="imports" title="src/app/profile-editor/profile-editor.component.ts (imports)">
 
 </code-example>
 
@@ -152,7 +152,7 @@ Create a property in the component class named `profileForm` and set the propert
 
 For the profile form, add two form control instances with the names `firstName` and `lastName`.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="formgroup" header="src/app/profile-editor/profile-editor.component.ts (form group)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="formgroup" title="src/app/profile-editor/profile-editor.component.ts (form group)">
 
 </code-example>
 
@@ -162,7 +162,7 @@ The individual form controls are now collected within a group. A `FormGroup` ins
 
 A form group tracks the status and changes for each of its controls, so if one of the controls changes, the parent control also emits a new status or value change. The model for the group is maintained from its members. After you define the model, you must update the template to reflect the model in the view.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.html" region="formgroup" linenums="false" header="src/app/profile-editor/profile-editor.component.html (template form group)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.html" region="formgroup" linenums="false" title="src/app/profile-editor/profile-editor.component.html (template form group)">
 
 </code-example>
 
@@ -174,13 +174,13 @@ The `ProfileEditor` component accepts input from the user, but in a real scenari
 
 Add an `ngSubmit` event listener to the `form` tag with the `onSubmit()` callback method.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="ng-submit" linenums="false" header="src/app/profile-editor/profile-editor.component.html (submit event)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="ng-submit" linenums="false" title="src/app/profile-editor/profile-editor.component.html (submit event)">
 
 </code-example>
 
 The `onSubmit()` method in the `ProfileEditor` component captures the current value of `profileForm`. Use `EventEmitter` to keep the form encapsulated and to provide the form value outside the component. The following example uses `console.warn` to log a message to the browser console.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="on-submit" header="src/app/profile-editor/profile-editor.component.ts (submit method)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="on-submit" title="src/app/profile-editor/profile-editor.component.ts (submit method)">
 
 </code-example>
 
@@ -188,7 +188,7 @@ The `submit` event is emitted by the `form` tag using the native DOM event. You
 
 Use a `button` element to add a button to the bottom of the form to trigger the form submission.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="submit-button" linenums="false" header="src/app/profile-editor/profile-editor.component.html (submit button)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="submit-button" linenums="false" title="src/app/profile-editor/profile-editor.component.html (submit button)">
 
 </code-example>
 
@@ -202,7 +202,7 @@ Use a `button` element to add a button to the bottom of the form to trigger the
 
 To display the `ProfileEditor` component that contains the form, add it to a component template.
 
-<code-example path="reactive-forms/src/app/app.component.1.html" region="app-profile-editor" linenums="false" header="src/app/app.component.html (profile editor)">
+<code-example path="reactive-forms/src/app/app.component.1.html" region="app-profile-editor" linenums="false" title="src/app/app.component.html (profile editor)">
 
 </code-example>
 
@@ -220,7 +220,7 @@ When building complex forms, managing the different areas of information is easi
 
 An address is a good example of information that can be grouped together. Form groups can accept both form control and form group instances as children. This makes composing complex form models easier to maintain and logically group together. To create a nested group in `profileForm`, add a nested `address` element to the form group instance.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="nested-formgroup" linenums="false" header="src/app/profile-editor/profile-editor.component.ts (nested form group)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="nested-formgroup" linenums="false" title="src/app/profile-editor/profile-editor.component.ts (nested form group)">
 
 </code-example>
 
@@ -232,7 +232,7 @@ After you update the model in the component class, update the template to connec
 
 Add the `address` form group containing the `firstName` and `lastName` fields to the `ProfileEditor` template.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.html" region="formgroupname" linenums="false" header="src/app/profile-editor/profile-editor.component.html (template nested form group)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.html" region="formgroupname" linenums="false" title="src/app/profile-editor/profile-editor.component.html (template nested form group)">
 
 </code-example>
 
@@ -264,13 +264,13 @@ The strict checks of the `setValue()` method help catch nesting errors in comple
 
 In `ProfileEditorComponent`, use the `updateProfile` method with the example below to update the first name and street address for the user.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="patch-value" header="src/app/profile-editor/profile-editor.component.ts (patch value)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="patch-value" title="src/app/profile-editor/profile-editor.component.ts (patch value)">
 
 </code-example>
 
 Simulate an update by adding a button to the template to update the user profile on demand.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.html" region="patch-value" linenums="false" header="src/app/profile-editor/profile-editor.component.html (update value)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.1.html" region="patch-value" linenums="false" title="src/app/profile-editor/profile-editor.component.html (update value)">
 
 </code-example>
 
@@ -286,7 +286,7 @@ The following section refactors the `ProfileEditor` component to use the form bu
 
 Import the `FormBuilder` class from the `@angular/forms` package.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="form-builder-imports" header="src/app/profile-editor/profile-editor.component.ts (import)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="form-builder-imports" title="src/app/profile-editor/profile-editor.component.ts (import)">
 
 </code-example>
 
@@ -294,7 +294,7 @@ Import the `FormBuilder` class from the `@angular/forms` package.
 
 The `FormBuilder` service is an injectable provider that is provided with the reactive forms module. Inject this dependency by adding it to the component constructor.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="inject-form-builder" header="src/app/profile-editor/profile-editor.component.ts (constructor)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="inject-form-builder" title="src/app/profile-editor/profile-editor.component.ts (constructor)">
 
 </code-example>
 
@@ -304,7 +304,7 @@ The `FormBuilder` service has three methods: `control()`, `group()`, and `array(
 
 Use the `group` method to create the `profileForm` controls.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="form-builder" header="src/app/profile-editor/profile-editor.component.ts (form builder)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="form-builder" title="src/app/profile-editor/profile-editor.component.ts (form builder)">
 
 </code-example>
 
@@ -320,11 +320,11 @@ Compare using the form builder to creating the instances manually.
 
 <code-tabs>
 
-  <code-pane path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="formgroup-compare" header="src/app/profile-editor/profile-editor.component.ts (instances)">
+  <code-pane path="reactive-forms/src/app/profile-editor/profile-editor.component.1.ts" region="formgroup-compare" title="src/app/profile-editor/profile-editor.component.ts (instances)">
   
   </code-pane>
 
-  <code-pane path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="formgroup-compare" header="src/app/profile-editor/profile-editor.component.ts (form builder)">
+  <code-pane path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="formgroup-compare" title="src/app/profile-editor/profile-editor.component.ts (form builder)">
 
   </code-pane>
 
@@ -340,7 +340,7 @@ Reactive forms include a set of validator functions for common use cases. These
 
 Import the `Validators` class from the `@angular/forms` package.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="validator-imports" header="src/app/profile-editor/profile-editor.component.ts (import)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="validator-imports" title="src/app/profile-editor/profile-editor.component.ts (import)">
 
 </code-example>
 
@@ -350,13 +350,13 @@ The most common validation is making a field required. This section describes ho
 
 In the `ProfileEditor` component, add the `Validators.required` static method as the second item in the array for the `firstName` control.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="required-validator" header="src/app/profile-editor/profile-editor.component.ts (required validator)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="required-validator" title="src/app/profile-editor/profile-editor.component.ts (required validator)">
 
 </code-example>
 
 HTML5 has a set of built-in attributes that you can use for native validation, including `required`, `minlength`, and `maxlength`. You can take advantage of these optional attributes on your form input elements. Add the `required` attribute to the `firstName` input element.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="required-attribute" linenums="false" header="src/app/profile-editor/profile-editor.component.html (required attribute)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="required-attribute" linenums="false" title="src/app/profile-editor/profile-editor.component.html (required attribute)">
 
 </code-example>
 
@@ -372,7 +372,7 @@ When you add a required field to the form control, its initial status is invalid
 
 Display the current status of `profileForm` using interpolation.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="display-status" linenums="false" header="src/app/profile-editor/profile-editor.component.html (display status)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="display-status" linenums="false" title="src/app/profile-editor/profile-editor.component.html (display status)">
 
 </code-example>
 
@@ -392,7 +392,7 @@ For more on form validation, visit the [Form Validation](guide/form-validation)
 
 Import the `FormArray` class from `@angular/forms` to use for type information. The `FormBuilder` service is ready to create a `FormArray` instance.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="form-array-imports" header="src/app/profile-editor/profile-editor.component.ts (import)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.2.ts" region="form-array-imports" title="src/app/profile-editor/profile-editor.component.ts (import)">
 
 </code-example>
 
@@ -402,7 +402,7 @@ You can initialize a form array with any number of controls, from zero to many,
 
 Use the `FormBuilder.array()` method to define the array, and the `FormBuilder.control()` method to populate the array with an initial control.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="aliases" header="src/app/profile-editor/profile-editor.component.ts (aliases form array)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="aliases" title="src/app/profile-editor/profile-editor.component.ts (aliases form array)">
 
 </code-example>
 
@@ -414,7 +414,7 @@ A getter provides easy access to the aliases in the form array instance compared
 
 Use the getter syntax to create an `aliases` class property to retrieve the alias's form array  control from the parent form group.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="aliases-getter" header="src/app/profile-editor/profile-editor.component.ts (aliases getter)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="aliases-getter" title="src/app/profile-editor/profile-editor.component.ts (aliases getter)">
 
 </code-example>
 
@@ -426,7 +426,7 @@ Use the getter syntax to create an `aliases` class property to retrieve the alia
 
 Define a method to dynamically insert an alias control into the alias's form array. The `FormArray.push()` method inserts the control as a new item in the array.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="add-alias" header="src/app/profile-editor/profile-editor.component.ts (add alias)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.ts" region="add-alias" title="src/app/profile-editor/profile-editor.component.ts (add alias)">
 
 </code-example>
 
@@ -438,7 +438,7 @@ To attach the aliases from your form model, you must add it to the template. Sim
 
 Add the template HTML below after the `<div>` closing the `formGroupName` element.
 
-<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="formarrayname" linenums="false" header="src/app/profile-editor/profile-editor.component.html (aliases form array template)">
+<code-example path="reactive-forms/src/app/profile-editor/profile-editor.component.html" region="formarrayname" linenums="false" title="src/app/profile-editor/profile-editor.component.html (aliases form array template)">
 
 </code-example>
 

aio/content/guide/releases.md

@@ -65,34 +65,68 @@ Disclaimer: The dates are offered as general guidance and may be adjusted by us
 
 The following table contains our current target release dates for the next two major versions of Angular: 
 
- Date                   | Stable Release | Compatibility 
- ---------------------- | -------------- | -------------
+ Date                   | Stable Release | Compatibility
+ ---------------------- | -------------- | ----------------
+ September/October 2018 | 7.0.0          | ^6.0.0
  March/April 2019       | 8.0.0          | ^7.0.0
- September/October 2019 | 9.0.0          | ^8.0.0
 
  Compatibility note: The primary goal of the backward compatibility promise is to ensure that changes in the core framework and tooling don't break the existing ecosystem of components and applications and don't put undue upgrade/migration burden on Angular application and component authors.
 
 
 {@a lts}
 {@a support}
-## Support policy and schedule
+## Support policy
 
 All of our major releases are supported for 18 months. 
 
-* 6 months of *active support*, during which regularly-scheduled updates and patches are released.
+* 6 months of active support, during which regularly-scheduled updates and patches are released, as described above in [Release frequency](#frequency "Release frequency").
 
-* 12 months of *long-term support (LTS)*, during which only critical fixes and security patches are released.
+* 12 months of long-term support (LTS). During the LTS period, only critical fixes and security patches will be released.
 
-The following table provides the support status and key dates for Angular version 5.0.0 and higher. 
+The following table provides the support status and key dates for Angular version 4.0.0 and higher. 
 
+<style>
 
-Version | Status | Released     | Active Ends  | LTS Ends
-------- | ------ | ------------ | ------------ | ------------ 
-^7.0.0  | Active | Oct 18, 2018 | Apr 18, 2019 | Apr 18, 2020
-^6.0.0  | LTS    | May 3, 2018  | Nov 3, 2018  | Nov 3, 2019
-^5.0.0  | LTS    | Nov 1, 2017  | May 1, 2018  | May 1, 2019
+    td, th {vertical-align: top}
+
+</style>
+
+<table>
+
+    <tr>
+        <th>Version</th>
+        <th>Status</th>
+        <th>Release Date</th>
+        <th>LTS Start Date</th>
+        <th>LTS End Date</th>
+    </tr>
+
+    <tr>
+        <td>^4.0.0</td>
+        <td>LTS</td>
+        <td>March 23, 2017</td>
+        <td>September 23, 2017</td>
+        <td>September 23, 2018</td>
+    </tr>
+
+    <tr>
+        <td>^5.0.0</td>
+        <td>LTS</td>
+        <td>November 1, 2017</td>
+        <td>May 1, 2018</td>
+        <td>May 1, 2019</td>
+    </tr>
+
+    <tr>
+        <td>^6.0.0</td>
+        <td>Active</td>
+        <td>May 3, 2018</td>
+        <td>November 3, 2018</td>
+        <td>November 3, 2019</td>
+    </tr>
+
+</table>
 
-LTS for Angular version ^4.0.0 ended on September 23, 2018.
 
 
 {@a deprecation}

aio/content/guide/reusable-animations.md

@@ -15,7 +15,7 @@ The [AnimationOptions](https://angular.io/api/animations/AnimationOptions) inter
 
 To create a reusable animation, use the [`animation()`](https://angular.io/api/animations/animation) method to define an animation in a separate `.ts` file and declare this animation definition as a `const` export variable. You can then import and reuse this animation in any of your app components using the [`useAnimation()`](https://angular.io/api/animations/useAnimation) API.
 
-<code-example path="animations/src/app/animations.ts" header="src/app/animations.ts" region="reusable" language="typescript" linenums="false">
+<code-example path="animations/src/app/animations.ts" title="src/app/animations.ts" region="reusable" language="typescript" linenums="false">
 </code-example>
 
 In the above code snippet, `transAnimation` is made reusable by declaring it as an export variable.
@@ -27,7 +27,7 @@ In the above code snippet, `transAnimation` is made reusable by declaring it as
 
 You can import the reusable `transAnimation` variable in your component class and reuse it using the `useAnimation()` method as shown below.
 
-<code-example path="animations/src/app/open-close.component.3.ts" header="src/app/open-close.component.ts" region="reusable" language="typescript" linenums="false">
+<code-example path="animations/src/app/open-close.component.3.ts" title="src/app/open-close.component.ts" region="reusable" language="typescript" linenums="false">
 </code-example>
 
 ## More on Angular animations

aio/content/guide/route-animations.md

@@ -43,7 +43,7 @@ Use the `RouterModule.forRoot` method to define a set of routes. Also, import th
 
 The following configuration defines the possible routes for the application.
 
-<code-example path="animations/src/app/app.module.ts" linenums="false" header="src/app/app.module.ts" region="route-animation-data" language="typescript">
+<code-example path="animations/src/app/app.module.ts" linenums="false" title="src/app/app.module.ts" region="route-animation-data" language="typescript">
 </code-example>
 
 The `home` and `about` paths are associated with the `HomeComponent` and `AboutComponent` views. The route configuration tells the Angular router to instantiate the `HomeComponent` and `AboutComponent` views when the navigation matches the corresponding path.
@@ -62,12 +62,12 @@ After configuring the routes, tell the Angular router where to render the views
 
 The `<router-outlet>` container has an attribute directive that contains data about active routes and their states, based on the `data` property that we set in the route configuration.
 
-<code-example path="animations/src/app/app.component.html" header="src/app/app.component.html" region="route-animations-outlet">
+<code-example path="animations/src/app/app.component.html" title="src/app/app.component.html" region="route-animations-outlet">
 </code-example>
 
 `AppComponent` defines a method that can detect when a view changes. The method assigns an animation state value to the animation trigger (`@routeAnimation`) based on the route configuration `data` property value.  Here's an example of an `AppComponent` method that detects when a route change happens.
 
-<code-example path="animations/src/app/app.component.ts" linenums="false" header="src/app/app.component.ts" region="prepare-router-outlet" language="typescript">
+<code-example path="animations/src/app/app.component.ts" linenums="false" title="src/app/app.component.ts" region="prepare-router-outlet" language="typescript">
 </code-example>
 
 Here, the `prepareRoute()` method takes the value of the output directive (established through `#outlet="outlet"`) and returns a string value representing the state of the animation based on the custom data of the current active route. You can use this data to control which transition to execute for each route.
@@ -79,7 +79,7 @@ Animations can be defined directly inside your components. For this example we a
 The following code snippet defines a reusable animation named `slideInAnimation`.
 
 
-<code-example path="animations/src/app/animations.ts" linenums="false" header="src/app/animations.ts" region="route-animations" language="typescript">
+<code-example path="animations/src/app/animations.ts" linenums="false" title="src/app/animations.ts" region="route-animations" language="typescript">
 </code-example>
 
 The animation definition does several things:
@@ -97,14 +97,14 @@ A route change activates the animation trigger, and a transition matching the st
 
 Make the animation definition available in your application by adding the reusable animation (`slideInAnimation`) to the `animations` metadata of the `AppComponent`.
 
-<code-example path="animations/src/app/app.component.ts" linenums="false" header="src/app/app.component.ts" region="define" language="typescript">
+<code-example path="animations/src/app/app.component.ts" linenums="false" title="src/app/app.component.ts" region="define" language="typescript">
 </code-example>
 
 ### Styling the host and child components
 
 During a transition, a new view is inserted directly after the old one and both elements appear on screen at the same time. To prevent this, apply additional styling to the host view, and to the removed and inserted child views. The host view must use relative positioning, and the child views must use absolute positioning. Adding styling to the views animates the containers in place, without the DOM moving things around.
 
-<code-example path="animations/src/app/animations.ts" linenums="false" header="src/app/animations.ts" region="style-view" language="typescript">
+<code-example path="animations/src/app/animations.ts" linenums="false" title="src/app/animations.ts" region="style-view" language="typescript">
 </code-example>
 
 ### Querying the view containers
@@ -113,7 +113,7 @@ Use the `query()` method to find and animate elements within the current host co
 
 Let's assume that we are routing from the *Home => About*.
 
-<code-example path="animations/src/app/animations.ts" linenums="false" header="src/app/animations.ts" region="query" language="typescript" linenums="false">
+<code-example path="animations/src/app/animations.ts" linenums="false" title="src/app/animations.ts" region="query" language="typescript" linenums="false">
 </code-example>
 
 The animation code does the following after styling the views: