Previously, the correct behavior of Angular custom elements relied on
the constructor being called (and thus the `injector` property being
initialized). However, some polyfills (e.g. `document-register-element`)
do not call the constructor of custom elements, which resulted in the
`injector` property being undefined and the `NgElementStrategy` failing
to be instantiated.
This commit fixes it by being tolerant to the `injector` property being
undefined and falling back to the injector passed to the
`createCustomElement()` config.
NOTE:
We don't have proper tests exercising the situation where the
constructor is not called. For now this is tested using a Google
internal test suite (which is how this issue was caught).
This commit also adds a rudimentary unit test to emulate this situation.
PR Close#36114
Previously, if an element started out as a regular `HTMLElement` (not a
Custom Element) and was later upgraded to a Custom Element, any
properties corresponding to component inputs that were set on the
element before upgrading it would not be captured correctly and thus not
reflected on the instantiated component.
This commit fixes it by ensuring that such properties are captured
correctly.
Jira issue: [FW-2006](https://angular-team.atlassian.net/browse/FW-2006)
Fixes#30848Closes#31416
PR Close#36114
Previously, the `TestStrategy` `NgElementStrategy` used in
`createCustomElement()` tests was created once and re-used in each test
(due to complications related to how `customElements.register()` works).
As a result, the `TestStrategy` instance's state (e.g. inputs) could be
polluted from previous tests and affect subsequent ones.
This commit ensures the strategy instance is reset before each test.
PR Close#36114
Previously, helper modules/components classes were declared even if the
tests were not run (because the environment did not support Custom
Elements for example).
This commit moves the declaration of the helpers inside the `describe()`
block, so they are not declared unnecessarily. This is in preparation of
adding more helpers that need to access variables declared inside the
`describe()` block.
PR Close#36114
Previously, we had to check whether `NgElementStrategy` had been
instantiated before accessing it. This was tedious and error prone,
since it was easy to forget to add the check in new call sites.
This commit switches to using a getter, so that the check has to be
performed in one place and is transparent to call sites (including any
future ones).
PR Close#36114
`createCustomElements()` creates some getters/setters for properties
corresponding to component inputs that delegate to the
`NgElementStrategy`. However, it is not guaranteed that the element's
`NgElementStrategy` will have been created when these getters/setters
are called, because some polyfills (e.g. `document-register-element`) do
not call the constructor.
Previously, trying to get/set input properties before connecting the
element to the DOM (via `connectedCallback()`) would fail due to
`NgElementStrategy` not being created.
This commit ensures that the `NgElementStrategy` is always created
before used inside the input property getters/setters (similar to how it
is done for other methods of `NgElement`).
Mentioned in https://github.com/angular/angular/pull/31416/files#r300326698.
PR Close#36114
The info about the pw storage is out of date.
We should really just point the reader to a go link, something like go/angular/passwords and keep
the info about secrets there.
PR Close#37212
The TOC at the top refers to an anchor that does not exist.
This change adds the missing anchor while preserving the old one in case someone depends on it.
PR Close#37212
`ts-node` is now an optional peer dependency of the shared dev-infra
package. Whenever a `ng-dev` command runs, and a TypeScript-based
configuration file exists, `ts-node` is set up if available.
That allows consumers of the package (as the components repo) to more
conveniently use a TypeScript-based configuration for dev-infra.
Currently, commands would need to be proxied through `ts-node`
which rather complicates the setup:
```
NG_DEV_COMMAND="ts-node ./node_modules/@angular/dev-infra-private/cli.js"
```
I'm thinking that it should be best-practice to use TypeScript for
writing the configuration files. Given that the tool is used primarily
in Angular projects (for which most sources are TypeScript), this should
be acceptable.
PR Close#37196
Adds a deprecation notice to the old merge-pr script informing the
user the script will be removed in favor of the ng-dev merge tooling.
This currently serves as a warning, and does not fail to perform the
merge.
PR Close#37204
PR #36601 itroduces icons on all links if the link contains https:// or http:// but there were some internal links left which contained https://angular.io. Removed https://angular.io from all these links.
PR Close#37157
The `rev` property has been in the initial commit that introduced
`resources.json` (196203f6d7) and has been
added to all new entries since (always with the value `true`). This
field is a remnant from back when this data was stored in a Firebase
Database and the `rev` field indicated whether the entry has been
reviewed/approved by a DevRel lead or something. Now that the data is
kept in the repository and the reviewing is done as part of the
corresponding PR, this field is no longer necessary.
PR Close#37181
Creates a tool in ng-dev which rebases a PR automatically and pushes
the rebase commits back to the PR. This is meant to be a replacement
to the local merge script currently in the repo and currently has
feature parity.
PR Close#37055
PR #13380 added support for `null` and `undefined` but the type on the parameter was not updated.
This would result in a compilation error if `fullTemplateTypeCheck` is enabled.
Fixes#36544
PR Close#37018
As mentioned in the previous commit, the autosquash strategy has
not been used in the components repo, so we could easily regress.
After thorough manual testing of the autosquash strategy again,
now that the merge script will be moved to framework, it came
to mind that there is a bug with the base revision in the
autosquash merge strategy. The problem is that the base revision
of a given PR is relying on the amount of commits in a PR.
This is prone to error because the amount of commits could easily
change in the autosquash merge strategy, because fixup or squash
commits will be collapsed. Basically invalidating the base revision.
To fix this, we fixate the base revision by determining the actual
SHA. This one is guaranteed to not change after the autosquash rebase.
The current merge script in framework fixates the revision by creating
a separate branch, but there is no benefit in that, compared to just
using an explicit SHA that doesn't need to be cleaned up..
PR Close#37184
The components repo does not use the autosquash merge strategy, so
recent changes to that seem to broke the autosquash strategy.
Since we don't run the rebase in interactive mode, the `--autosquash`
flag has no effect. This is by design in Git. We can make it work by
setting the git sequence editor to `true` so that the rebase seems
like an interactive one to Git, while it isn't one for the user.
This matches conceptually with the merge script currently used in
framework. The only difference is that we allow a real interactive
rebase if the `commit message fixup` label is applied. This allows
commit message modifications (and others) if needed.
PR Close#37184
Integrates the merge script into the `ng-dev` CLI. The goal is that
caretakers can run the same command across repositories to merge a pull
request. The command is as followed: `yarn ng-dev pr merge <number>`.
PR Close#37184
Moves the merge script from the components repository over
to the shared dev-infra package. The merge script has been
orginally built for all Angular repositories, but we just
kept it in the components repo temporarily to test it.
Since everything went well on the components side, we now
move the script over and integrate it into the dev-infra package.
PR Close#37184
This commit includes a couple minor fixes for the script that compares master and patch branch:
- take only relevant release commit into account while generating the diff
- fix the initial version display (avoid '+' sign from being added)
- removes obsolete parameter that was needed for v9.0.x branch only
PR Close#37150
This commit includes the following improvements:
- Document that the `create-image.sh` script (and by extention the
`update-preview-server.sh` script) need to have access to a `yarn`
executable.
- Add a note on cron jobs running in non-interactive, non-login shells
(which affects their execution context and have different behavior vs
running the same commands in an interactive, login shell).
- Change the Node.js and `yarn` installation instructions to ensure the
`yarn` executable will be available on the `PATH` and not require an
interactive, login shell (as happens, for example, when installing it
via [nvm](https://github.com/nvm-sh/nvm)). This makes it easier to set
up a cron job that runs the `update-preview-server.sh` script.
NOTE: The equivalent updates have been made on the GCE VM that hosts the
PR preview server.
PR Close#37015
In order to avoid unnecessary operations, the `update-preview-server.sh`
script, that is used to update the PR preview server Docker container,
will only try to update the Docker container if either any files in the
`aio/aio-builds-setup/` directory have changed since the last update or
if a previous update failed. A failed previous update is detected by
checking whether the temporary `aio-builds:provisional` Docker image
still exists. This temporary image is created during the update
operation and is renamed to `aio-builds:latest` if the update goes well.
Previously, the update script was not able to detect a previous failed
attempt if the operation failed before creating the
`aio-builds:provisional` Docker image, such as if the `create-image.sh`
script failed. This could lead to a situation where the preview server
Docker container would not be updated after a failed attempt.
This commit improves the logic for detecting failed attempts to account
for this type of failures. It does this by not removing an older
`aio-builds:provisional` Docker image until a new one is successfully
created.
NOTE: While this is not full-proof, it is an improvement as it
eliminates a certain kind of failures.
PR Close#37015
Previously, the CHANGELOG file was caught under the general
"*" glob, which meant that it fell under the dev-infra
approval group. This does not really make sense since it
has more to do with public-facing changes. As such, this
commit moves the CHANGELOG file specifically to the
public-api approval group.
PR Close#37143
The _tViewNode field (that was marked as internal) on the ViewRef is not
necessery as a reference to a relevant TView is available as a local
variable.
PR Close#36814
Creates a tool in ng-dev to determine the PRs which become conflicted
by merging a specified PR. Often the question is brought up of how
many PRs require a rebase as a result of a change. This script allows
to determine this impact.
PR Close#37051
Note: This commit was applied to the 9.1.x branch
out of order because local changes were not pushed
directly after the 9.1.7 release. You can see what
is actually included in 9.1.7 using its tag here:
https://github.com/angular/angular/commits/9.1.7
PR Close#37116
`skipLibCheck` had to be added to a few AIO examples, because of a breaking change in master. These changes update to a newer version of `angular-in-memory-web-api` that accounts for the breaking change.
PR Close#37128
Previously this inline-tag-def was returning the `doc` which is rendered
to the output as `[Object Object]` - obviously not what is intended.
Now it returns `''` which effectively strips the tag handler from the
rendered output.
PR Close#37132
Adds the gitub configuration to the ng-dev configuration. This github
configuration provides information needed for making API requests to
github. Upcoming tooling related PRs will require these API requests
being possible.
PR Close#37097
Adds a gitub object to the common configuration for ng-dev. This github
configuration provides information needed for making API requests to
github.
PR Close#37097
After rewriting much of the router doc, it became apparent that the lazy loading/preloading information should be in the lazy loading doc rather than in the router doc. There is now instead a short section that touches on lazy loading but links to the lazy learning document instead of covering it in detail in the router doc.
PR Close#36748
This commit updates payload size limit that is triggering errors after merging cda2530. That commit seems to contribute to the payload size increase, but all checks were "green" for the original PR (#35889), so it looks like it's an accumulated payload size increase from multiple changes. The goal of this commit is to bring the patch branch back to "green" state.
PR Close#37124
Previously all static styling information (including the ones from component/directive host bindings) would get merged into a single value before it would be written into the `@Input('class'/'style')`. The new behavior specifically excludes host values from the `@Input` bindings.
Fix#35383
PR Close#35889
Dynamic embedded views were conceptually different from inline embedded views, but we have since
removed the inline embedded views so we now only have "embedded views".
See related refactoring work to remove inline embedded views in #34715
and #37073.
PR Close#37117
If one component Parent inherit another component Base like the following:
@Component(...)
class Base {
constructor(@Inject(InjectionToken) injector: Injector) { }
}
@Component(...)
class Parent extends Base {
// no constructor
}
When creating Component Parent, the dependency injection should work on delegating ctors like above.
The code Parent code above will be compiled into something like:
class Parent extends Base {
constructor() {
super(...arguments);
}
}
The angular core isDelegateCtor function will identify the delegation ctor to the base class.
But when the code above is minified (using terser), the minified code will compress the spaces, resulting in something like:
class Parent extends Base{constructor(){super(...arguments)}}
The regex will stop working, since it wasn't aware of this case. So this fix will allow this to work in minified code cases.
PR Close#36962
Release commits do not require a commit body as the context, usually
provided in commit body, is already available in the process of
releasing. No additional value is gained from adding a body message
on these commits.
PR Close#37110
The current code will not work as the `e` will be an event,
If we try to access e.id and e.url it will throw an exception, the correct way is to use map or filter down to specific events
PR Close#37027
Cindy has been working with us for a while now
and should be listed on AIO as a part of our team.
This commit adds her image / bio to the Angular
contributors page.
PR Close#37076
The ActiveIndexFlag is no longer needed because we no longer have "inline embedded views".
There is only one type of embedded view so we do not need complex tracking for
inline embedded views.
HAS_TRANSPLANTED_VIEWS now takes the place of the ACTIVE_INDEX slot as a
simple boolean rather than being a shifted flag inside the ACTIVE_INDEX bits.
PR Close#37073
This commit removes the duplicate `and` found in the
`Support for the development cycle` section part of the
getting started guide.
Fixes#37060
PR Close#37067
The local rebase-pr script assumes the existence of specific git
aliases. Instead this script should rely on the full written out
command instead.
PR Close#37050
Introduces infrastructure to validate configuration of the ng-dev
command at run time. Allowing for errors to be returned to the
user running the command.
PR Close#37049
Adding `readFileBuffer()` method and allowing `writeFile()` to accept a
Buffer object will be useful when reading and writing non-text files,
such as is done in the `@angular/localize` package.
PR Close#36843
The `FormStyle` enum offers two options, and the explanation of the difference between the two can be found on the CLDR official website. Sadly, the link changed and the one currently referenced is a dead-end. This commit fixes the link.
PR Close#37069
The deprecation notice for platform-webworker
APIs is too prescriptive and notes that we will
remove the package in version 10. Since we are
not planning to do this for version 10, this
commit updates the notice to read "a future
version of Angular".
PR Close#37052
As per our discussion in the dev-infra sync meeting, we don't want
to have all dependencies show up as peer dependencies. Instead, we
only want to have larger dependencies such as `typescript` or buildifier
as peer dependencies. Tslib is also included for the sake of it being
generally a peer dependency of all Angular framework packages.
The rationale is that Yarn is smart enough to collapse packages
if all satisfy a given range. This means that we don't necessarily
need to have all dependencies as peer dependencies. The initial
idea was to keep all dependencies as peer dependencies so that
we have control over duplication of packages as downloading multiple
packages w/ different versions impacts local dev, CI and caches.
At the same time though, we don't want to bother with setting
up peer dependencies all the time. Not every consumer of the
shared dev-infra package would like to manually specify `yaml`
or `multimatch` etc. in the project `package.json`. Hence we
decided to go with a hybrid approach where only more impactful
dependencies are peer dependencies, and other smaller ones can
be standard depdencies that are usually collapsed by Yarn anyway.
Also this commit removes tslib from build targets that don't
rely on it.
PR Close#36980
In the code example of the AsyncValidator example there was an aliased
import for the rxjs operator `of`. To align with the RxJS docs it should
just use a plain import of `of`
PR Close#36856
It makes sense that the lead technical writer should be allowed
to approve changes to DOCS: Marketing. The inspriration for this
change came to the current lead technical writer in a vision, or
perhaps it was a fugue state caused by too little caffeine. No
one knows. It's still a good idea though.
PR Close#37014
This commit refactors TS-only utility functions to a separate file so
that they could be shared with Ivy language service.
A separate ts_library rule is created so that there is no dependency on
`compiler` and `compiler-cli` to make the compilation fast and
light-weight.
The method `getPropertyAssignmentFromValue` is modified slightly to
improve the ergonomics of the function.
PR Close#36984
Previously the `AsyncLocker` was configured to only wait
50x500ms before timing out. This is 25secs, which is often
less than a normal run of ngcc, so the chance of a timeout
flake was quite high.
The timeout is now 500x500ms, which is 250secs.
PR Close#36979
Prior to this change, the `template` instruction logic was located in the `instructions/container.ts` file alongside embedded view instructions. Since unused embedded view instructions are removed in a previous commit, this commit renames `container.ts` -> `template.ts`, since only template-related instructions were retained.
PR Close#34715
All migration guides did not have a direct link to access them so added them to the side nav in the section updating to version 9 for direct access, it also helps to add right side nav to these migration guides
Fixes#33582
PR Close#34979
Clicking on a link may take us to an extenal source, which may lead to user leaving angular.io unintentionally.
Added visual cues on external links so that user knows which links are external and which are intenal to angular.io.
Fixes#17620
PR Close#36601
ASTs for property read and method calls contain information about
the entire span of the expression, including its receiver. Use cases
like a language service and compile error messages may be more
interested in the span of the direct identifier for which the
expression is constructed (i.e. an accessed property). To support this,
this commit adds a `nameSpan` property on
- `PropertyRead`s
- `SafePropertyRead`s
- `PropertyWrite`s
- `MethodCall`s
- `SafeMethodCall`s
The `nameSpan` property already existed for `BindingPipe`s.
This commit also updates usages of these expressions' `sourceSpan`s in
Ngtsc and the langauge service to use `nameSpan`s where appropriate.
PR Close#36826
Migrate to use a typescript file rather than a javascript file for
defining the ng-dev config file. This will allow long term for the
config to rely on the types while writing the config, avoiding
errors.
PR Close#37017
Previously ng-dev loaded the config through a javascript file, this
change allows for the loaded file to be either javascript or
typescript. This enables configurations to be written with type
safety.
PR Close#37017
This reverts commit 4abd60361a.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit 65337fb8b8.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit 5bddeea559.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit 4becc1bc95.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit b6c042d0a3.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit 654868f584.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit 7e9d5f5e82.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit 3361f59a4f.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit c6e5225ec3.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
This reverts commit dcf1dcb757.
The changes to the case-sensitivity handling in #36968 caused multiple
projects to fail to build. See #36992, #36993 and #37000.
The issue is related to the logical path handling. But it is felt that
it is safer to revert the entire PR and then to investigate further.
PR Close#37003
In resource.model.ts the interfaces of the resources were defined as classes, these do not use any class properties and are only used for type checking. So, changed them from class to interface.
PR Close#36958
web worker platform. Minor grammar/stylistic changes.
Inline documentation for the PlatformLocation service instead mentions @angular/platform-server.
Typos corrected, minor grammar and stylistic changes.
PR Close#36953
change to aot docs to include changes after angular 9
aot is true for new applications created, also it will
be updated to aot true once app is updated using ng update
PR Close#35487
Migrate to the new .ng-dev-config.js file for providing a configuration
to ng-dev. This is being done as a result of the previous commit which
updated the ng-dev command to expect this new file.
PR Close#36918
Migrating to a js file for providing a configuration allows for more
extensive configuration at run time. This allows for configs to include
logic and move beyond static values found in JSON files.
PR Close#36918
These tests were matching file-paths against what is retrieved from the
TS compiler. But the TS compiler paths have been canonicalised, so the
tests were brittle on case-insensitive file-systems.
PR Close#36968
These tests were matching file-paths against what is retrieved from the
TS compiler. But the TS compiler paths have been canonicalised, so the
tests were brittle on case-insensitive file-systems.
PR Close#36968
These tests were matching file-paths against what is retrieved from the
TS compiler. But the TS compiler paths have been canonicalised, so the
tests were brittle on case-insensitive file-systems.
PR Close#36968
The type checking infrastrure uses file-paths that may come from the
TS compiler. Such paths will have been canonicalized, and so the type
checking classes must also canonicalize paths when matching.
PR Close#36968
Since the `MockFileSystemWindows` is case-insensitive, any
drive path that must be added to a normalized path should be lower
case to make the path canonical.
PR Close#36968
Previously this class used the file passed in directly to look up files in the
in-memory mock file-system. But this doesn't match the behaviour of
case-insensitive file-systems. Now the look up is done on the canonical
file paths.
PR Close#36968
Previously this method was returning the exact opposite value
than the correct one.
Also, calling `this.exists()` causes an infinite recursions,
so the actual file-system `fs.existsSync()` method is used
to ascertain the case-sensitivity of the file-system.
PR Close#36968
Previously the `getRootDirs()` function was not converting
the root directory paths to their canonical form, which can
cause problems on case-insensitive file-systems.
PR Close#36968
The `getCanonicalFileName()` method was not actually
calling the `useCaseSensitiveFileNames()` method. So
it always returned a case-sensitive canonical filename.
PR Close#36968
In #36892 the `ModuleWithProviders` type parameter becomes required.
This exposes a bug in ngcc, where it can only handle functions that have a
specific form:
```
function forRoot() {
return { ... };
}
```
In other words, it only accepts functions that return an object literal.
In some libraries, the function instead returns a call to another function.
For example in `angular-in-memory-web-api`:
```
InMemoryWebApiModule.forFeature = function (dbCreator, options) {
return InMemoryWebApiModule_1.forRoot(dbCreator, options);
};
```
This commit changes the parsing of such functions to use the
`PartialEvaluator`, which can evaluate these more complex function
bodies.
PR Close#36948
Previously this method was implemented on the `NgccReflectionHost`,
but really it is asking too much of the host, since it actually needs to do
some static evaluation of the code to be able to support a wider range
of function shapes. Also there was only one implementation of the method
in the `Esm2015ReflectionHost` since it has no format specific code in
in.
This commit moves the whole function (and supporting helpers) into the
`ModuleWithProvidersAnalyzer`, which is the only place it was being used.
This class will be able to do further static evaluation of the function bodies
in order to support more function shapes than the host can do on its own.
The commit removes a whole set of reflection host tests but these are
already covered by the tests of the analyzer.
PR Close#36948
Previously, some preview server tests were only running for public
builds. In the past, these tests were run for both public and non-public
builds. The non-public builds tests were disabled in #23576, probably
during debugging some failure.
This commit fixes it by ensuring the tests are run for both public and
non-public builds.
PR Close#36837
The test was introduced in #23576, but the behavior the test was
verifying does not match the actual behavior of
`BuildCleaner#getOpenPrNumbers()`.
The reason that the test did not fail is that the verification happened
asynchronously, but the test completed synchronously (by accident).
PR Close#36837
Previously, when the preview server `build-cleanup` script failed, the
error was logged but not reflected to the commands exit code. This seems
to have been accidentally broken in #23576.
This commit fixes it by ensuring the error is re-thrown from the
`BuildCleaner#cleanUp()` method to allow the process to exit with an
error exit code.
PR Close#36837
Previously, the `dev` npm script in `aio/aio-builds-setup/scripts-js/`
(the PR preview server implementation) would run both linting and unit
tests. This was slow and delayed the feedback loop on each change.
Since the `dev` script should be run during development and give
feedback as fast as possible, this commit removes the linting from the
`dev` script and only keeps the unit tests. Linting is still run in the
`test` npm script (which is more comprehensive). Also, in most cases the
developer's IDE will show linting errors in real time in the editor.
PR Close#36837
Update the order in which the `update-preview-server.sh` script expects
its arguments (and the associated docs) to be consistent with the order
of arguments in other commands/docs (such as
`vm-setup--start-docker-container.md`).
PR Close#36837
I recently went through the process of setting up a preview server VM
again and updated the instructions and references based on the latest
docs for Debian, Docker, Google Compute Engine, etc.
PR Close#36837
Previously, in order to remain as deterministic as possible, the
Dockerfile for the preview server Docker image had all dependencies
pinned to specific versions. It turns out that some packages (such as
`nginx`, `nodejs`, and `openssl` - potentially others too) make older
versions unavailable on the repositories once a newer version is
available.
See for example:
- https://github.com/nodesource/distributions/issues/33
- https://askubuntu.com/questions/715104/how-can-i-downgrade-openssl-via-apt-get
This commit, therefore, removes the exact versions for these packages.
The latest versions will be installed everytime the Docker image is
built (subject to Docker caching).
PR Close#36837
In order to ease local development, self-signed SSL/TLS certificates are
created when building the preview server Docker image. These
certificates are valid for 365 days. Thus, it is possible for an old
certificate to be re-used past its expiration date due to Docker's
caching intermediate layers.
Previously, this would lead to hard-to-debug failures in the
`aio-health-check` and `aio-verify-setup` checks. Even after finding out
that the failures were caused by an expired certificate, it was not
obvious why that would be the case.
This commit adds an additional check to the `aio-health-check` command
that checks the certificates' expiration dates. This helps surface such
errors. It also prints a more helpful message, prompting the user to
build the Docker image with the `--no-cache` option to fix the problem
with self-signed certificates.
PR Close#36837
Previously, the preview server Docker image was based on Debian 9
(stretch).
This commit upgrades the preview server Docker image to Debian 10
(buster) and also upgrades all dependencies to latest versions
(including upgrading Node.js from v10 to v12).
(The GCE VM running the preview server Docker container was also
upgraded from Debian 9 to 10 on 2020-04-27.)
---
Other changes:
- Pinned the installed version of `curl` to make the `aio-health-check`
and `aio-verify-setup` checks (which use `curl`) more deterministic.
- Dropped the `*-backports` Debian repositories, since they are no
longer needed. The `*-backports` repositories were introduced in
593fe5ed25 to install `nginx` from, but
became obsolete in 2f1a862b83, which
switched to installing `nginx` from the regular repositories again.
- Added `vim` to the list of installed dependencies (for convenience
during debugging).
PR Close#36837
This commit upgrades all dependencies in `scripts-js/` to latest
versions and also includes all necessary code changes to ensure the
tests are passing with the new dependency versions.
PR Close#36837
The current benchmark for transplanted views only exercises the path
when the declaration location is dirty and the insertion is not. This
test adds a benchmark for when both insertion and declaration are dirty.
PR Close#36722
This commit fixes 2 separate issues related to root nodes retrieval from
embedded views with `<ng-content>`:
1) we did not account for the case where there were no projectable nodes
for a given `<ng-content>`;
2) we did not account for the case where projectable nodes for a given
`<ng-content>` were represented as an array of native nodes (happens in
the case of dynamically created components with projectable nodes);
Fixes#35967
PR Close#36051
A caching mechanism was put in place to prevent repeated calls to
the Github API. As the CI setup no longer relies on calls to the
Github API, this caching is no longer necessary.
It was discovered that this caching was causing a contention issue
for saucelabs testing as the same tunnel was being reused for
multiple jobs simultaneously. With this caching mechanism removed
the jobs will once again run via separate tunnels.
PR Close#36936
The `elements` tests were disabled on Saucelabs, because they were failing on IE10. The problem was that we were loading an es2015 file from npm directly, causing a syntax error. These changes transpile the file to es5.
PR Close#36929
Disables Bazel runfile tree creation. Only if a given
execution strategy relies on runfile tree creation, the
runfile tree is created lazily. This helps as currently
Bazel spends unnecessary time on CI building runfile trees
for tests which are cached and aren't re-run.
The goal is to spend less time on CI for cached test/build
targets. We can't measure impact yet as there are targets
for the integration tests that hide the potential benefits.
on the components repo a 80% time reduction could be observed.
PR Close#36914
The `getLocation()` method was not working as there were typos in the
properties it was reading. This was not picked up because there were
neither typings for these properties nor unit tests to check it worked.
PR Close#36920
Previously we were passing a string form of the value to pluralize
to the `getLocalePluralCase()` function that is extracted from the
locale data. But some locales have functions that rely upon this
value being a number not a string.
Now we convert the value to a number before passing it to the
locale data function.
Fixes#36888
PR Close#36901
This commit also updates the projects to more closely match what a newly
generated app would look like with the exception of `tslint.json` files,
which would create too many linting failures. These will be updated in a
follow-up PR.
PR Close#36145
Previously, in the `test_aio` CI job, we ran ngcc before building the
app with `yarn build`. This was supposed to have the benefit of taking
advantage of the parallel capabilities of standalone ngcc (vs implicitly
running it via `ng build`).
It turns out that the work done by the standalone ngcc was thrown away
before the `ng build`, resulting in `ng build` having to run ngcc all
over again. This happened because the `yarn build` script (run after the
standalone ngcc step) also runs `yarn install`, which essentially cleans
up `node_modules/`, thus discarding all the work already done by ngcc.
Here is an [example CI job][1], where this can be seen in action:
One can see the "Compiling <some-package> : es2015 as esm2015" logs in
the `yarn --cwd aio ngcc --properties es2015` step (as the standalone
ngcc processes the various entry-points) and then see the same logs in
the `yarn --cwd aio build --progress=false` step (as ngcc has to process
the entry-points all over again).
This commit removes the redundant standalone ngcc run and lets the CLI
handle ngcc via `ng build`. It is possible to instrument the build
process in a way that we can run the standalone ngcc after
`yarn install` and thus take advantage of the performance gains in
parallel mode, but the latest version of the CLI can already run ngcc in
parallel mode as a pre-build step, so this is unnecessary.
[1]: https://circleci.com/gh/angular/angular/658691
PR Close#36145
Update the Angular CLI and Angular framework packages to latest `@next`
versions. Also, update the app to look more closely to how a newly
generated app with the latest CLI would look like.
PR Close#36145
This commit updates all payload sizes for angular.io to make it easier
to compare payload size changes as a result of upgrading Angular
packages and other dependencies in subsequent commits.
PR Close#36145
This commit adds a method `overrideInlineTemplate` to the
`MockTypescriptHost`. This allows us to override an inline template
in a Component without changing the TypeScript parts. This methods works
in a similar way as `MockTypescriptHost.override()`, which is used for
overriding external template.
PR Close#36890
This function needs to deduplicate the paths that are found from the
paths mappings. Previously this deduplication was not linear and also
called the expensive `relative()` function many times.
This commit, suggested by @JoostK, reduces the complexity of the deduplication
by using a tree structure built from the segments of each path.
PR Close#36881
Previously the `basePaths` were computed when the finder was instantiated.
This was a waste of effort in the case that the targeted entry-point is already
processed.
This change makes the computation of `basePaths` lazy, so that the work is
only done if they are actually needed.
Fixes#36874
PR Close#36881
In TS 3.9 the compiler will start to wrap ES2015 classes in an IIFE to help with
tree-shaking when the class has "associated" statements.
E.g.
```ts
let PlatformLocation = /** @class */ (() => {
...
class PlatformLocation {
}
...
return PlatformLocation;
})();
```
This commit updates `Esm2015ReflectionHost` to support this format.
PR Close#36884
Previously the setup-rbe.sh script did not allow accounts that did
have domains of angular.io or google.com. Since we add emails from
other domains into everyone@angular.io, we are unable to be certain
in the script that the account is not actually a member of the
required group. This change adds the option to choose to continue
with an email account logged in which we cannot verify by domain.
PR Close#36846
Migrates away from inline searching for files and running buildifier
directly, instead using ng-dev for formatting. Additionally, provides
a deprecation message for any usages of the previous commands.
PR Close#36842
In an effort to centralize formatting and linting enforcement into one
location, buildifier is being added as a formatter for ng-dev's format
command. Allowing for format enforcement for all .bzl, .bazel, WORKSPACE
and BUILD files.
PR Close#36842
For testing on IE, shims must be served in es5. Because the shims
served in these tests come from node_modules and are not part of
the angular/angular source code, they must be transpiled to es5 if
they are published as es6. This macro allows for a uniform method
for running this transpilation during the build process.
PR Close#36802
This commit makes the test project a filegroup so that it could be
shared with the Ivy tests.
Also removed `project/foo.ts` since it is no longer used.
PR Close#36865
Create a common environment stamping script in the ng-dev tooling
as to be used in common release tasks. This is the first step in
consolidating pieces of the release scripting process into a single
location to develop a release tool.
PR Close#36844
Only refresh transplanted views at the insertion location in Ivy.
Previously, Ivy would check transplanted views at both the insertion and
declaration points. This is achieved by adding a marker to the insertion
tree when we encounter a transplanted view that needs to be refreshed at
its declaration. We use this marker as an extra indication that we still
need to descend and refresh those transplanted views at their insertion
locations even if the insertion view and/or its parents are not dirty.
This change fixes several issues:
* Transplanted views refreshed twice if both insertion and declaration
are dirty. This could be an error if the insertion component changes
result in data not being available to the transplanted view because it
is slated to be removed.
* CheckAlways transplanted views not refreshed if shielded by
non-dirty OnPush (fixes#35400)
* Transplanted views still refreshed when insertion tree is detached
(fixes#21324)
PR Close#35968
Now that `ngcc/src/ngcc_options` imports `FileWriter` type, there is a
circular dependency detected by the `ts-circular-deps:check` lint check:
```
ngcc/src/ngcc_options.ts
→ ngcc/src/writing/file_writer.ts
→ ngcc/src/packages/entry_point_bundle.ts
→ ngcc/src/ngcc_options.ts
```
This commit moves the `PathMappings` type (and related helpers) to a
separate file to avoid the circular dependency.
NOTE:
The circular dependency was only with taking types into account. There
was no circular dependency for the actual (JS) code.
PR Close#36626
When running in parallel mode, worker processes forward errors thrown
during task processing to the master process, which in turn exits with
an error.
However, there are cases where the error is not directly related to
processing the entry-point. One such case is when there is not enough
memory (for example, due to all the other tasks being processed
simultaneously).
Previously, an `ENOMEM` error thrown on a worker process would propagate
to the master process, eventually causing ngcc to exit with an error.
Example failure: https://circleci.com/gh/angular/angular/682198
This commit improves handling of these low-memory situations by
detecting `ENOMEM` errors and killing the worker process, thus allowing
the master process to decide how to handle that. The master process will
put the task back into the tasks queue and continue processing tasks
with the rest of the worker processes (and thus with lower memory
pressure).
PR Close#36626
Previously, when the last worker process crashed, the master process
would try to re-spawn it indefinitely. This could lead to an infinite
loop (if for some reason the worker process kept crashing).
This commit avoids this by limiting the number of re-spawn attempts to
3, after which ngcc will exit with an error.
PR Close#36626
Previously, when running in parallel mode and a worker process crashed
while processing a task, it was not possible for ngcc to continue
without risking ending up with a corrupted entry-point and therefore it
exited with an error. This, for example, could happen when a worker
process received a `SIGKILL` signal, which was frequently observed in CI
environments. This was probably the result of Docker killing processes
due to increased memory pressure.
One factor that amplifies the problem under Docker (which is often used
in CI) is that it is not possible to distinguish between the available
CPU cores on the host machine and the ones made available to Docker
containers, thus resulting in ngcc spawning too many worker processes.
This commit addresses these issues in the following ways:
1. We take advantage of the fact that files are written to disk only
after an entry-point has been fully analyzed/compiled. The master
process can now determine whether a worker process has not yet
started writing files to disk (even if it was in the middle of
processing a task) and just put the task back into the tasks queue if
the worker process crashes.
2. The master process keeps track of the transformed files that a worker
process will attempt to write to disk. If the worker process crashes
while writing files, the master process can revert any changes and
put the task back into the tasks queue (without risking corruption).
3. When a worker process crashes while processing a task (which can be a
result of increased memory pressure or too many worker processes),
the master process will not try to re-spawn it. This way the number
or worker processes is gradually adjusted to a level that can be
accomodated by the system's resources.
Examples of ngcc being able to recover after a worker process crashed:
- While idling: https://circleci.com/gh/angular/angular/682197
- While compiling: https://circleci.com/gh/angular/angular/682209
- While writing files: https://circleci.com/gh/angular/angular/682267
Jira issue: [FW-2008](https://angular-team.atlassian.net/browse/FW-2008)
Fixes#36278
PR Close#36626
This commit adds a `revertFile()` method to `FileWriter`, which can
revert a transformed file (and its backup - if any) written by the
`FileWriter`.
In a subsequent commit, this will be used to allow ngcc to recover
when a worker process crashes in the middle of processing a task.
PR Close#36626
With this commit, the master process will keep track of the transformed
files that each worker process is intending to write to disk.
In a subsequent commit, this info will be used to allow ngcc to recover
when a worker process crashes in the middle of processing a task.
PR Close#36626
With this commit, worker processes will notify the master process about
the transformed files they are about to write to disk before starting
writing them.
In a subsequent commit, this will be used to allow ngcc to recover when
a worker process crashes in the middle of processing a task.
PR Close#36626
This commit enhances the `CompileFn`, which is used to process each
entry-point, to support running a passed-in callback (and wait for it to
complete) before proceeding with writing the transformed files to disk.
This functionality is currently not used. In a subsequent commit, it
will be used for passing info from worker processes to the master
process that will allow ngcc to recover when a worker process crashes in
the middle of processing a task.
PR Close#36626
Rename the `markTaskCompleted()` method to be consistent with the other
similar methods of `TaskQueue` (`markAsFailed()` and
`markAsUnprocessed()`).
PR Close#36626
This commit adds support for stopping processing an in-progress task
and moving it back to the list of pending tasks.
In a subsequent commit, this will be used to allow ngcc to recover when
a worker process crashes in the middle of processing a task.
PR Close#36626
Previously, ngcc would run in parallel mode (using the
`ClusterExecutor`) when there were at least 2 CPU cores (and all other
requirements where met). On systems with just 2 CPU cores, this meant
there would only be one worker process (since one CPU core is always
reserved for the master process). In these cases, the tasks would still
be processed serially (on the one worker process), but we would also pay
the overhead of communicating between the master and worker processes.
This commit fixes this by only running in parallel mode if there are
more than 2 CPU cores (i.e. at least 2 worker processes).
PR Close#36626
Previously, the "Compiling <entryPoint>" log message was printed before
starting to analyze and transform files, but after creating the
`EntryPointBundle` (which includes creating the TS program).
Since creating the `EntryPointBundle` involves some work, it is more
accurate to move the log message before creating the bundle.
PR Close#36626
Previously the exec command was used, however the exec command would
exit the original calling script regardless of the whether exit was
called. This caused the release script to always exit after the
pre-check phase.
PR Close#36862
This reverts commit d669429bd2.
The Angular CLI relies upon deep imports into `@angular/localize`. In this
case it relies upon the `source_file_utils.ts` file being in its previous
position.
In `master` (i.e. v10) the CLI will update its import to cope but we need
to revert for 9.1.x.
PR Close#36861
If there's an error during the first creation pass of a `TView`, the data structure may be corrupted which will cause framework assertion failures downstream which can mask the user's error. These changes add a new flag to the `TView` that indicates whether the first creation pass was successful, and if it wasn't we try re-create the `TView`.
Fixes#31221.
PR Close#36381
An enum declaration in TypeScript code will be emitted into JavaScript
as a regular variable declaration, with the enum members being declared
inside an IIFE. For ngcc to support interpreting such variable
declarations as enum declarations with its members, ngcc needs to
recognize the enum declaration emit structure and extract all member
from the statements in the IIFE.
This commit extends the `ConcreteDeclaration` structure in the
`ReflectionHost` abstraction to be able to capture the enum members
on a variable declaration, as a substitute for the original
`ts.EnumDeclaration` as it existed in TypeScript code. The static
interpreter has been extended to handle the extracted enum members
as it would have done for `ts.EnumDeclaration`.
Fixes#35584
Resolves FW-2069
PR Close#36550
There was a lot of duplication and multiline backtick
strings that made it hard to maintain.
Some more text to ensure the commit message is long enough.
PR Close#36834
This will allow the utilities in this file to be shared outside
`translate` code.
Some more text to get to the 100 character commit message requirement.
PR Close#36834
Prior to this change, animations-related runtime logic assumed that the @HostBinding and @HostListener with synthetic (animations) props are used for Components only. However having @HostBinding and @HostListener with synthetic props on Directives is also supported by View Engine. This commit updates the logic to select correct renderer to execute instructions (current renderer for Directives and sub-component renderer for Components).
This PR resolves#35501.
PR Close#35568
Correct typo in the router docs, changing "as your app growns" to "as your app grows". Previously the wrong spelling was used and this commit rectifies this.
PR Close#36786
Migrates away from gulp to ng-dev for running our formatter.
Additionally, provides a deprecation warning for any attempted
usage of the previous `gulp format:*` tasks.
PR Close#36726
Previously we used gulp to run our formatter, currently clang-format,
across our repository. This new tool within ng-dev allows us to
migrate away from our gulp based solution as our gulp solution had
issue with memory pressure and would cause OOM errors with too large
of change sets.
PR Close#36726
This change is part of a larger effort to migrate all golden type
tracking files to a single location. Additionally, this makes it
a bit easier to manage file ownership in pullapprove.
PR Close#36455
After the user edits the file `core.d.ts`, the symbol from the core module will be invalided, which only is created when init the language service. Then the language-service will crash.
PR Close#36783
This change demonstrates how to use the newly created
rule in one of our performance tests.
Future commits and PRs will migrate the remaining tests to this new bazel rule.
PR Close#36434
* Set up dev-infra's :npm_package to also contain benchmarking suite
* Add benchmarking deps to dev-infra's package.json
* Add a bazel workspace to dev-infra's package.json. This is so that when a
project wants to use dev-infra's code and macros, they can just import the
macros from their node_modules instead of loading it separately
PR Close#36434
* Move tools/brotli-cli, tools/browsers, tools/components,
tools/ng_rollup_bundle, and modules/e2e_util to dev-infra/benchmarking
* Fix imports and references to moved folders and files
* Set up BUILD.bazel files for moved folders so they can be packaged with
dev-infra's :npm_package
PR Close#36434
Enforces a requirement that all PR commit messages contain a body
of at least 100 characters. This is meant to encourage commits
within the repo to be more descriptive of each change.
PR Close#36632
Previously, the commit message body regex only matched the first line
of the body. This change corrects the regex to match the entire line.
PR Close#36632
Currently, if changes are made to `compiler-cli/ngcc` and to other
compiler-related files, then only the `fw-ngcc` group is requested
for review. This is because the `not contains_any_globs` condition
will be false for `fw-compiler` and the group will never become active.
We fix this by removing the incorrect condition and filtering out ngcc
files before checking `contains_any_globs` in the primary fw-compiler
condition.
PR Close#36661
Currently, when verifying our pullapprove configuration, we don't
respect modifications to the set of files in a condition.
e.g. It's not possible to do the following:
```
contains_any_globs(files.exclude(...), [
```
This prevents us from having codeowner groups which match a directory,
but want to filter out specific sub directories. For example, `fw-core`
matches all files in the core package. We want to exclude the schematics
from that glob. Usually we do this by another exclude condition.
This has a *significant* downside though. It means that fw-core will not
be requested if a PR changes schematic code, _and_ actual fw-core code.
To support these conditions, the pullapprove verification tool is
refactored, so that it no longer uses Regular expressions for parsing,
but rather evaluates the code through a dynamic function. This is
possible since the conditions are written in simple Python that can
be run in NodeJS too (with small modifications/transformations).
PR Close#36661
This was originally fixed in #35976, but one of the window.scrollY
assertions was missed. Also updated tests to use toBeGreater/LessThan
to improve failure messages.
PR Close#36742
This PR adds test case to cover a failure that was detected after
merging #36302. That commit will be reverted and will need a new PR that
does not cause this test to fail.
PR Close#36699
This commit update the PullApprove config to add AndrewKushnir to the `fw-testing` group. The reason for this change is that I was involved into TestBed rewrite (for Ivy) and it belongs to the `fw-testing` group ownership.
PR Close#36744
Moves the circular deps golden for packages into a subfolder of goldens,
`/goldens/circular-deps/` to more easily target the files for
ownership.
PR Close#36630
Bumping the version of benchpress as a new version needs to be released
as part of the effort to set up more benchmarking accross the
angular/angular and angular/components repos.
PR Close#36457
Previously, our process included running the pre-check script before
releasing. With our new publishing process this was dropped. This
change adds in automatically executing this check before publish for
both next and latest
PR Close#36527
Previously, we only displayed the new `$localize` id, which is not
currently what most people have in their translation files.
Until people migrate to the new message id system it is confusing
not to display the legacy ids.
PR Close#36761
Upgrading @bazel/bazelisk to version 1.4.0 as this introduces the
bazel binary. This prevents the need to have a `bazel` script defined
in package.json to point to `bazelisk`, instead it is just available
on install.
PR Close#36729
This reverts commit 1756cced4a.
The reason for this revert is because of the change being too risky for
a patch release of Angular. Changing date formatting proves to be a
breaking change and can only be apart of the next release.
PR Close#36751
Currently the commit message and corresponding version are flipped, which makes it hard to review the changes. This commit updates the script to properly recognize the order of arguments.
PR Close#36749
Updating `REQUIRED_BASE_SHA` for master and patch branches to make sure PRs that we merge are rebased after `commit-message` validation script update (to make sure the `lint` CI job fails in case a PR contains commits with invalid commit messages).
PR Close#36750
When module overrides (via `TestBed.overrideModule`) are present, it might affect all modules that import (even transitively) an overridden one. For all affected modules we need to recalculate their scopes for a given test run and restore original scopes at the end. Prior to this change, we were recalculating module scopes only for components that are used in a test, without taking into account module hierarchy. This commit updates Ivy TestBed logic to calculate all potentially affected modules are reset cached scopes information for them (so that scopes are recalculated as needed).
Resolves#36619.
PR Close#36649
Prior to this commit unbound attributes were treated as possible inputs to structural directives. Since structural directives can only accepts inputs defined using microsyntax expression (e.g. `<div *dir="exp">`), such unbound attributes should not be considered as inputs. This commit aligns Ivy and View Engine behavior and avoids using unbound attributes as inputs to structural directives.
PR Close#36441
Based on the migration guide, provided classes which don't have
either `@Injectable`, `@Directive`, `@Component` or `@Pipe` need
to be migrated.
This is not correct as provided classes with an `@NgModule` also
have a factory function that can be read by the r3 injector. It's
unclear in which cases the `@NgModule` decorator is used for
provided classes, but this scenario has been reported.
Either we fix this in the migration, or we make sure to report
this as unsupported in the Ivy compiler.
Fixes#35700.
PR Close#36369
link is very deep down on architecture page this commit is part of a larger effort to standardise ownload sections on angular.io
This commit partially addresses #35459
PR Close#36565
This commit fixes an issue where adding `fixup` commits was triggering a lint error. The problem was caused by the fact that we used the entire message body while checking whether `fixup` commit has a corresponding "parent" commit in a range. This issue was found after enforcing a check that exits the process if there is an invalid commit message found (4341743b4a).
PR Close#36733
link is very deep down on acessibility page this commit is part of a larger effort to standardise ownload sections on angular.io
This commit partially addresses #35459
PR Close#36561
Currently the `commit-message` validation script does not exit
with a non-zero exit code if the commit message validation failed.
This means that invalid commit messages are currently not
causing CI to be red. See: https://circleci.com/gh/angular/angular/686008
PR Close#36723
Version 7.0.0 is under LTS until 18-4-2020 removed it from the table which showed it as LTS and added to versions that are no longer under support.
PR Close#36708
The cached file-system was implemented to speed up ngcc
processing, but in reality most files are not accessed many times
and there is no noticeable degradation in speed by removing it.
Benchmarking `ngcc -l debug` for AIO on a local machine
gave a range of 196-236 seconds with the cache and 197-224
seconds without the cache.
Moreover, when running in parallel mode, ngcc has a separate
file cache for each process. This results in excess memory usage.
Notably the master process, which only does analysis of entry-points
holds on to up to 500Mb for AIO when using the cache compared to
only around 30Mb when not using the cache.
Finally, the file-system cache being incorrectly primed with file
contents before being processed has been the cause of a number
of bugs. For example https://github.com/angular/angular-cli/issues/16860#issuecomment-614694269.
PR Close#36687
The flag that determines whether something should be able to inject from `viewProviders` is opt-out and the pipes weren't opted out, resulting in them being able to see the viewProviders if they're placed on a component host node.
Fixes#36146.
PR Close#36512
Previously, when a document included `_`, the autoLinker will try to
generate a link, e.g from `core/ɵComponentDef._`. This commit adds it
to the ignored words to prevent that.
PR Close#36316
Previously, the auto linker generated links without an `href` when the
API was private. This commit fixes this by making sure that the `path`
of the document is not empty.
Closes#36260
PR Close#36316
Previously our CI during the setup process has made requests
to the Github API to determine the target branch and shas.
With this change, this information is now determined via git
commands using pipeline parameters from CircleCI.
PR Close#36500
In "Getting started" guide pipes are not intoduced anywhere but are used in the guide.
Added refrence to pipes for better consistency in the tutorial.
Fixes#36375
PR Close#36584
This commit fixes how the language service evaluates the compatibility
of types to work with arbitrary union types. As a result, compatibility
checks are now more strict and can catch similarities or differences
more clearly.
```
number|string == string|null // OK
number|string == number // OK
number|string == null // not comparable
number == string // not comparable
```
Using Ivy as a backend should provide these diagnoses for free, but we
can backfill them for now.
Closes https://github.com/angular/vscode-ng-language-service/issues/723
PR Close#36529
The change in e041ac6f0d
to support sending unlocker process output to the main ngcc
console output prevents messages require that the main process
relinquishes the event-loop to allow the `stdout.on()` handler to
run. This results in none of the messages being written when ngcc
is run in `--no-async` mode, and some messages failing to be
written if the main process is killed (e.g. ctrl-C).
It appears that the problem with Windows and detached processes
is known - see https://github.com/nodejs/node/issues/3596#issuecomment-250890218.
But in the meantime, this commit is a workaround, where non-Windows
`inherit` the main process `stdout` while on Windows it reverts
to the async handler approach, which is better than nothing.
PR Close#36637
This rewrite changes headings to focus on user tasks rather than features,
verifies that content is up-to-date and complete, removes colloquial phrases,
adds prerequisites, and expands on a task-based section in the beginning
(a quick reference).
PR Close#35566
Prior to this commit, the unknown property check was unnecessarily invoked for AOT-compiled components (for these components, the check happens at compile time). This commit updates the code to avoid unknown property verification for AOT-compiled components by checking whether schemas information is present (as a way to detect whether this is JIT or AOT compiled component).
Resolves#35945.
PR Close#36072
Prior to this change, there was a problem while matching template attributes, which mistakenly took i18n attributes (that might be present in attrs array after template ones) into account. This commit updates the logic to avoid template attribute matching logic from entering the i18n section and as a result this also allows generating proper i18n attributes sections instead of keeping these attribute in plain form (with their values) in attribute arrays.
PR Close#36422
In the past, server-side rendered apps needed to convert URLs used in
API requests to absolute when rendering on the server. Originally, this
was handled in the `universal` guide and corresponding example app by
modifying the `HeroService` to use `APP_BASE_HREF` to derive the
absolute URL.
In #28956, the guide was updated to show an improved method: Specifying
an `HttpInterceptor` that took care of converting the URLs to absolute.
That interceptor was only provided when rendering the app on the server.
By mistake, the corresponding example app was not updated along with the
guide.
Since `@nguniversal/*` v7.1.0, it is no longer necessary to convert the
URLs to absolute inside the app. This is handled in the `@nguniversal`
libs (see angular/universal#897).
This commit updates the example app to remove unnecessary code and
modifies the guide to mention the issue with absolute URLs, but explain
that developers only need to worry about it when not using one of the
`@nguniversal/*-engine` packages.
PR Close#36483
Previously, there were no tests for the `universal` docs example. This
meant that the project was not tested at all (not even ensuring that it
can be built successfully).
This commit adds e2e tests for the `universal` example (ported from
`toh-pt6` and cleaned up) and also verifies that the project can be
built successfully (including the server).
PR Close#36483
Previously, building the `universal` example failed with:
```
node_modules/@types/express/index.d.ts(90,50): error TS2694: Namespace '".../@types/express-serve-static-core/index"' has no exported member 'Params'.
node_modules/@types/express/index.d.ts(90,64): error TS2694: Namespace '".../@types/express-serve-static-core/index"' has no exported member 'ParamsDictionary'.
```
This commit fixes the error by upgrading
`@types/express-serve-static-core` to a newer version.
See DefinitelyTyped/DefinitelyTyped#40905 for more details.
PR Close#36483
As mentioned in the `universal` guide, the `toh-pt6` examples is the
starting poitn for the `universal` example. However, the two examples
had become out-of-sync, because some fixes/changes were made to the
Tour-of-Heroes examples.
This commit ports these changes to the `universal` example.
PR Close#36483
Previously, the `package.json` template used in the ZIP archive of the
`universal` example that we offer for download missed the `build` npm
script.
This commit updates the template for the `universal` docs example to
include the `build` npm script.
NOTE:
The `build` npm script is already included in
`aio/tools/examples/shared/boilerplate/universal/package.json`, but it
was removed by the example zipper.
PR Close#36483
In certain use-cases it's useful to have an ability to use empty strings as translations. Currently Ivy fails at runtime if empty string is used as a translation, since some parts of internal data structures are not created properly. This commit updates runtime i18n logic to handle empty translations and avoid unnecessary extra processing for such cases.
Fixes#36476.
PR Close#36499
When formatting a time with the `b` or `B` format codes, the rendered
string was not correctly handling day periods that spanned midnight.
Instead the logic was falling back to the default case of `AM`.
Now the logic has been updated so that it matches times that are within
a day period that spans midnight, so it will now render the correct
output, such as `at night` in the case of English.
Applications that are using either `formatDate()` or `DatePipe` and any
of the `b` or `B` format codes will be affected by this change.
Fixes#36566
PR Close#36611
On Windows, the output of a detached process (such as the unlocker
process used by `LockFileWithChildProcess`) is not shown in the parent
process' stdout.
This commit addresses this by piping the spawned process' stdin/stdout
and manually writing to the parent process' stdout.
PR Close#36569
The current ngcc lock-file strategy spawns a new process in order to
capture a potential `SIGINT` and remove the lock-file. For more
information see #35861.
Previously, this unlocker process was spawned as soon as the `LockFile`
was instantiated in order to have it available as soon as possible
(given that spawning a process is an asynchronous operation). Since the
`LockFile` was instantiated and passed to the `Executor`, this meant
that an unlocker process was spawned for each cluster worker, when
running ngcc in parallel mode. These processes were not needed, since
the `LockFile` was not used in cluster workers, but we still had to pay
the overhead of each process' own memory and V8 instance.
(NOTE: This overhead was small compared to the memory consumed by ngcc's
normal operations, but still unnecessary.)
This commit avoids the extra processes by only spawning an unlocker
process when running on the cluster master process and not on worker
processes.
PR Close#36569
For some reason (possibly related to async/await promises)
the ngcc process is not exiting when spawned from the CLI
when there has been an error (such as when it timesout waiting
for a lockfile to become free).
Calling `process.exit()` directly fixes this.
Fixes#36616
PR Close#36622
With the large scale refactoring of the repo to the new version of clang-format, some import orders were changed.
Specifically the imports found in this range.
The file previously read:
import {TestBed} from './test_bed';
import {ComponentFixtureAutoDetect, ComponentFixtureNoNgZone, TestBedStatic, TestComponentRenderer, TestModuleMetadata} from './test_bed_common';
import {R3TestBedCompiler} from './r3_test_bed_compiler';
and now reads:
import {R3TestBedCompiler} from './r3_test_bed_compiler';
import {TestBed} from './test_bed';
import {ComponentFixtureAutoDetect, ComponentFixtureNoNgZone, TestBedStatic, TestComponentRenderer, TestModuleMetadata} from './test_bed_common';
This change in order cause the circular dependency to be entered earlier and changed the golden file for our circular deps discovery.
PR Close#36629
Updates the $locationShim to receive the most recent Location change
made, even if it happened before initialize() is called. This is
important when AngularJS bootstrapping is deferred and there is a delay
between when $locationShim is constructed and when it is initialized.
With this change, the $locationShim will correctly reflect any redirects
that occurred between construction and initialization.
Closes#36492
PR Close#36498
On small screens (e.g. on mobile), the text on some of the buttons in
the About page was truncated. Changed the text size, margin and
padding so that the the whole text is visible on such screens (320px to
480px).
PR Close#36576
The undecorated-classes-with-decorated-fields migration relies on
the type checker to resolve base classes of individual classes.
It could happen that resolved base classes have no value declaration.
e.g. if they are declared through an interface in the default types.
Currently the migration will throw in such situations because it assumes
that `ts.Symbol#valueDeclaration` is always present. This is not the
case, but we don't get good type-checking here due to a bug in the
TypeScript types. See:
https://github.com/microsoft/TypeScript/issues/24706.
Fixes#36522.
PR Close#36543
Previously, when we needed to detect whether a file is external to a
package, we only checked whether the relative path to the file from the
package's root started with `..`. This would detect external imports
when the packages were siblings (e.g. peer dependencies or hoisted to
the top of `node_modules/` by the package manager), but would fail to
detect imports from packages located in nested `node_modules/` as
external. For example, importing `node_modules/foo/node_modules/bar`
from a file in `node_modules/foo/` would be considered internal to the
`foo` package.
This could result in processing/analyzing more files than necessary.
More importantly it could lead to errors due to trying to analyze
non-Angular packages that were direct dependencies of Angular packages.
This commit fixes it by also verifying that the relative path to a file
does not start with `node_modules/`.
Jira issue: [FW-2068](https://angular-team.atlassian.net/browse/FW-2068)
Fixes#36526
PR Close#36559
Previously, the `elements` docs example only worked in browsers that
natively supported Custom Elements and ES2015 modules. Furthermore, it
didn't work on StackBlitz, because StackBlitz ignores the specified
`target` in `tsconfig.json` and uses the UMD bundles (i.e. ES5 code)
even on browsers that do support ES2015.
(NOTE: In the past, this was not a problem, because we explicitly did
not provide a StackBlitz example. This has changed in #36067.)
This commit ensures the example works on all browsers and also on
StackBlitz by providing the necessary Custom Elements polyfills.
Fixes#36532
PR Close#36536
The base path for package and entry-points is known so there is
no need to store these in the file. Also this commit avoids storing
empty arrays unnecessarily.
PR Close#36486
Previously, even if an entry-point did not need to be processed,
ngcc would always parse the files of the entry-point to compute
its dependencies. This can take a lot of time for large node_modules.
Now these dependencies are cached in the entry-point manifest,
and read from there rather than computing them every time.
See https://github.com/angular/angular/issues/36414\#issuecomment-608401834
FW-2047
PR Close#36486
When the compiler needs to convert a type reference to a value
expression, it may encounter a type that refers to a namespaced symbol.
Such namespaces need to be handled specially as there's various forms
available. Consider a namespace named "ns":
1. One can refer to a namespace by itself: `ns`. A namespace is only
allowed to be used in a type position if it has been merged with a
class, but even if this is the case it may not be possible to convert
that type into a value expression depending on the import form. More
on this later (case a below)
2. One can refer to a type within the namespace: `ns.Foo`. An import
needs to be generated to `ns`, from which the `Foo` property can then
be read.
3. One can refer to a type in a nested namespace within `ns`:
`ns.Foo.Bar` and possibly even deeper nested. The value
representation is similar to case 2, but includes additional property
accesses.
The exact strategy of how to deal with these cases depends on the type
of import used. There's two flavors available:
a. A namespaced import like `import * as ns from 'ns';` that creates
a local namespace that is irrelevant to the import that needs to be
generated (as said import would be used instead of the original
import).
If the local namespace "ns" itself is referred to in a type position,
it is invalid to convert it into a value expression. Some JavaScript
libraries publish a value as default export using `export = MyClass;`
syntax, however it is illegal to refer to that value using "ns".
Consequently, such usage in a type position *must* be accompanied by
an `@Inject` decorator to provide an explicit token.
b. An explicit namespace declaration within a module, that can be
imported using a named import like `import {ns} from 'ns';` where the
"ns" module declares a namespace using `declare namespace ns {}`.
In this case, it's the namespace itself that needs to be imported,
after which any qualified references into the namespace are converted
into property accesses.
Before this change, support for namespaces in the type-to-value
conversion was limited and only worked correctly for a single qualified
name using a namespace import (case 2a). All other cases were either
producing incorrect code or would crash the compiler (case 1a).
Crashing the compiler is not desirable as it does not indicate where
the issue is. Moreover, the result of a type-to-value conversion is
irrelevant when an explicit injection token is provided using `@Inject`,
so referring to a namespace in a type position (case 1) could still be
valid.
This commit introduces logic to the type-to-value conversion to be able
to properly deal with all type references to namespaced symbols.
Fixes#36006
Resolves FW-1995
PR Close#36106
Although this code has been part of Angular 9.x I only noticed this
error when upgrading to Angular 9.1.x because historically the source
locale data was not injected when localizing, but as of
angular/angular-cli#16394 (9.1.0) it is now included. This tipped me off
that my other bundles were not being built properly, and this change
allows me to build a valid ES5 bundle (I have also added a verification
step to my build pipeline to alert me if this error appears again in any
of my bundles).
I found the `locales/global/*.js` file paths being referenced by the
`I18nOptions` in
@angular-devkit/build-angular/src/utils/i18n-options.ts,
and following that it looks like it is actually loaded and used in
@angular-devkit/build-angular/src/utils/process-bundle.ts. I saw the
function `terserMangle` does appear that it is likely aware of the build
being ES5, but I'm not sure why this is not producing a valid ES5
bundle.
This change updates `tools/gulp-tasks/cldr/extract.js` to produce ES5
compliant `locales/global/*.js` and that fixes my issue. However, I am
not sure if @angular-devkit/build-angular should be modified to produce
a valid ES5 bundle instead or if the files could be TypeScript rather
than JavaScript files.
A test that a valid ES5 bundle is produced would be helpful, and I hope
this is reproducible and not some issue with my config.
PR Close#36342
Previously, it was not clear that the `minLength` and `maxLength` validators
can only be used with objects that contain a `length` property. This commit
clarifies this.
PR Close#36297
fixes#34614
There's an edge case where if I use two (or more) sibling <router-outlet>s in two (or more) child routes where their parent route doesn't have a component then preactivation will trigger all canDeactivate checks with the same component because it will use wrong OutletContext.
PR Close#36302
Previously, the `pre-commit-validate` command (used in the `commit-msg`
git hook) assumed that the commit message was stored in
`.git/COMMIT_EDITMSG` file. This is usually true, but not when using
[git worktrees](https://git-scm.com/docs/git-worktree), where `.git` is
a file containing the path to the actual git directory.
This commit fixes it by taking advantage of the fact that git passes the
actual path of the file holding the commit message to the `commit-msg`
hook and husky exposes the arguments passed by git as
`$HUSKY_GIT_PARAMS`.
NOTE:
We cannot use the environment variable directly in the `commit-msg` hook
command, because environment variables need to be referenced differently
on Windows (`%VAR_NAME%`) vs macOS/Linux (`$VAR_NAME`). Instead, we pass
the name of the environment variable and the validation script reads the
variable's value off of `process.env`.
PR Close#36507
Previously we had a singleton `ROOT_SCOPE` object, from
which all `BindingScope`s derived. But this caused ngcc to
produce non-deterministic output when running multiple workers
in parallel, since each process had its own `ROOT_SCOPE`.
In reality there is no need for `BindingScope` reference names
to be unique across an entire application (or in the case of ngcc
across all the libraries). Instead we just need uniqueness within
a template.
This commit changes the compiler to create a new root `BindingScope`
each time it compiles a component's template.
Resolves#35180
PR Close#36362
In cc4b813e75 the `getBasePaths()`
function was changed to log a warning if a `basePath()` computed from
the `paths` mappings did not exist. It turns out this is a common and
accepted scenario, so we should not log warnings in this case.
Fixes#36518
PR Close#36525
Currently the golden output of the circular-deps tool is purely
based on the order of source files passed to the tool, and on the
amount of imports inside source files.
This is actually resulting in deterministic output as running
the tool multiple times without any changes to source files,
results in the same output.
Though it seems like the tool is too strict and we can avoid
unnecessary golden changes if:
1. A source file that is part of a cycle is imported earlier (in terms
of how the analyzer visits them). This could result in the cycle path
starting with a different source file.
2. Source files which are not part of a cycle are imported earlier
(in terms of how the analyzer visits them). This could result in moved
items in the golden if re-approved (even though the cycles remain the same)
To fix this, we normalize the cycle path array that serves as
serializable data structure for the text-based goldens. Since
the paths represents a cycle, the path can be shifted in a
deterministic way so that cycles don't change unnecessarily
in the golden, and to simplify comparison of cycles.
Additionally, we sort the cycles in a deterministic way so
that the golden doesn't change unnecessarily (as explained above).
PR Close#36505
`fullTemplateTypeCheck` is no longer required since we now use `strictTemplates` which is a superset of the former option.
Follow-up on: 04f61c0c3e (r38354112)
PR Close#36502
This commit removes individual components from parsing-cases.ts and
colocate them with the actual tests. This makes the tests more readable.
PR Close#36495
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
Previously, the bazel stamping regex only matched on versions
0-9 for major and minor numbers, this update allows for matching
on any number for major, minor or patch.
PR Close#36523
During static evaluation of expressions, the partial evaluator
may come across a binary + operator for which it needs to
evaluate its operands. Any of these operands may be a reference
to an enum member, in which case the enum member's value needs
to be used as literal value, not the enum member reference
itself. This commit fixes the behavior by resolving an
`EnumValue` when used as a literal value.
Fixes#35584
Resolves FW-1951
PR Close#36461
Previously, `isRelativePath()` assumed paths are *nix-style. This caused
Windows-style paths (such as `C:\foo\some-package\some-file.js`) to not
be recognized as "relative" imports.
This commit fixes this by using the OS-agnostic `isRooted()` helper and
also accounting for both styles of path delimiters: `/` and `\`
PR Close#36372
there was a typo in _resourcess.scss file there was an extra comma added some spaces too that were needed for proper styling of the code
PR Close#35935
on small mobile screens the top tab bar contains text which was not visible on small screens changed text size, margin and padding so that the text could be contained in these screens (320px to 480px)
PR Close#35935
Currently destroy hooks are stored in memory as `[1, hook, 5, hook]` where
the numbers represent the index at which to find the context and `hook` is
the function to be invoked. This breaks down for `multi` providers,
because the value at the index will be an array of providers, resulting in
the hook being invoked with an array of all the multi provider values,
rather than the provider that was destroyed. In ViewEngine `ngOnDestroy`
wasn't being called for `multi` providers at all.
These changes fix the issue by changing the structure of the destroy hooks to `[1, hook, 5, [0, hook, 3, hook]]` where the indexes inside the inner array point to the provider inside of the multi provider array. Note that this is slightly different from the original design which called for the structure to be `[1, hook, 5, [hook, hook]`, because in the process of implementing it, I realized that we wouldn't get passing the correct context if only some of the `multi` providers have `ngOnDestroy` and others don't.
I've run the newly-added `view_destroy_hooks` benchmark against these changes and compared it to master. The difference seems to be insignificant (between 1% and 2% slower).
Fixes#35231.
PR Close#35840
When TypeScript downlevels ES2015+ code to ES5, it uses some helper
functions to emulate some ES2015+ features, such as spread syntax. The
TypeScript compiler can be configured to emit these helpers into the
transpiled code (which is controlled by the `noEmitHelpers` option -
false by default). It can also be configured to import these helpers
from the `tslib` module (which is controlled by the `importHelpers`
option - false by default).
While most of the time the helpers will be either emitted or imported,
it is possible that one configures their app to neither emit nor import
them. In that case, the helpers could, for example, be made available on
the global object. This is what `@nativescript/angular`
v9.0.0-next-2019-11-12-155500-01 does. See, for example, [common.js][1].
Ngcc must be able to detect and statically evaluate these helpers.
Previously, it was only able to detect emitted or imported helpers.
This commit adds support for detecting these helpers if they are neither
emitted nor imported. It does this by checking identifiers for which no
declaration (either concrete or inline) can be found against a list of
known TypeScript helper function names.
[1]: https://unpkg.com/browse/@nativescript/angular@9.0.0-next-2019-11-12-155500-01/common.js
PR Close#36418
This commit refactors the process for determining the type of an Angular
attribute to be use a function that takes an attribute name and returns
the Angular attribute kind and name, rather than requiring the user to
query match the attribute name with the regex and query the matching
array.
This refactor prepares for a future change that will improve the
experience of completing attributes in `()`, `[]`, or `[()]` contexts.
PR Close#36301
Recent ZoneJS-related commit (416c786774) update the `promise.ts` file, but it looks like original PR was not rebased after clang update. As a result, the `lint` CircleCI job started to fail in master after merging that PR (https://github.com/angular/angular/pull/36311). This commit updates the format of the `promise.ts` script according to the new clang rules.
PR Close#36487
Close#36142
In Firefox extensions, the `window.fetch` is not configurable, that means
```
const desc = Object.getOwnPropertyDescriptor(window, 'fetch');
desc.writable === false;
```
So in this case, we should not try to patch `fetch`, otherwise, it will
throw error ('fetch is ReadOnly`)
PR Close#36311
Each docs example has an `example-config.json` configuration file. Among
other things, this file can be used to specify what commands to run in
order to test the example. (If not specified, the `run-example-e2e.js`
script will run a default `yarn e2e` command.)
Previously, the property specifying the test commands was called `e2e`.
This is because in the past only e2e tests were run for docs examples.
Since recently, some examples may specify commands for other types of
tests (such as unit tests). Therefore, calling the property that holds
the list of test commands `e2e` no longer makes sense and can be
misleading to people looking at the configuration files.
This commit renamed the property to the more generic `tests`. In the
future, the `run-example-e2e.js` script (and corresponding npm script)
should be renamed and refactored to also avoid giving the impression
that only e2e tests are run.
Discussed in:
https://github.com/angular/angular/pull/36143#discussion_r395148379
PR Close#36143
The `core-js` dependency is no longer included in `package.json` for
`cli`-type examples, but only for the `systemjs` ones. This commit
updates the `package.json` templates to reflect that (and also updates
the `npm-packages` guide accordingly).
PR Close#36143
Previously, only e2e tests were run for docs examples on CI. As a
result, unit tests (which are included in the zipped archives we provide
for users to download and play with the examples locally) were often
outdated and broken.
This commit configures specific docs examples that have meaningful unit
tests to run them on CI (via the `run-example-e2e.js` script). Where
necessary, the unit tests are fixed to ensure they pass and reflect the
changes in the corresponding component/service.
This commit also removes some auto-generated unit tests that are not
meaningful (e.g. make trivial assertions, such that a component instance
is truthy) and are often broken anyway (e.g. because the corresponding
component has been changed in ways that make the tests fail).
PR Close#36143
In rare cases a project with configured `rootDirs` that has imports to
non-existent identifiers could fail in the migration.
This happens because based on the application code, the migration could
end up trying to resolve the `ts.Symbol` of such non-existent
identifiers. This isn't a problem usually, but due to a upstream bug
in the TypeScript compiler, a runtime error is thrown.
This is because TypeScript is unable to compute a relative path from the
originating source file to the imported source file which _should_
provide the non-existent identifier. An issue for this has been reported
upstream: https://github.com/microsoft/TypeScript/issues/37731. The
issue only surfaces since our migrations don't provide an absolute base
path that is used for resolving the root directories.
To fix this, we ensure that we never use relative paths when parsing
tsconfig files. More details can be found in the TS issue.
Fixes#36346.
PR Close#36367
The source-map flattening was throwing an error when there
is a cyclic dependency between source files and source-maps.
The error was either a custom one describing the cycle, or a
"Maximum call stack size exceeded" one.
Now this is handled more leniently, resulting in a partially loaded
source file (or source-map) and a warning logged.
Fixes#35727Fixes#35757
Fixes https://github.com/angular/angular-cli/issues/17106
Fixes https://github.com/angular/angular-cli/issues/17115
PR Close#36452
Recently we added support for ignoring specified deep-import
warnings by providing sets of regular expressions within the
`ngcc.config.js` file. But this was only working for the project
level configuration.
This commit fixes ngcc so that it will also read these regular
expressions from package level configuration too.
Fixes#35750
PR Close#36423
The `browser` package.json property is now supported to the same
level as `main` - i.e. it is sniffed for UMD, ESM5 and CommonJS.
The `browser` property can also contain an object with file overrides
but this is not supported by ngcc.
Fixes#36062
PR Close#36396
Previously, `main` was only checked for `umd` or `commonjs`
formats. Now if there are `import` or `export` statements in the
source file it will be deemed to be in `esm5` format.
Fixes#35788
PR Close#36396
clang-format was recently updated and any PRs that touch files in the
language service will have to reformat all the files.
Instead of changing the formatting in those PRs, this PR formats all
files in language-service package once and for all.
PR Close#36426
Prior to this change we manage a local version of commit message validation
in addition to the commit message validation tool contained in the ng-dev
tooling. By adding the ability to validate a range of commit messages
together, the remaining piece of commit message validation that is in the
local version is replicated.
We use both commands provided by the `ng-dev commit-message` tooling:
- pre-commit-validate: Set to automatically run on an git hook to validate
commits as they are created locally.
- validate-range: Run by CI for every PR, testing that all of the commits
added by the PR are valid when considered together. Ensuring that all
fixups are matched to another commit in the change.
PR Close#36172
Beginning with this change, global approvals will now require the approver
to include `Reviewed-for: global-approvers`, and a docs global approval
requires `Reviewed-for: global-docs-approvers`.
Historically, providing a review by any member of the global reviewer
groups would automatically be considered a global review. This change
enforces that global approval should be an intentional, explicit action.
The global-approvers and global-docs-approvers group will not be
requested as reviews by pullapprove.
PR Close#36384
Rebuild the yarn lock file from scratch to collapse instances where
one package is able to satisfy multiple dependencies. Currently we
have some situations where we have multiple versions when one would
work.
Example:
```
"@babel/code-frame@^7.0.0":
version "7.0.0"
resolved "https://registry.yarnpkg.com/@babel/cod
integrity sha512-OfC2uemaknXr87bdLUkWog7nYuliM9Ij
dependencies:
"@babel/highlight" "^7.0.0"
"@babel/code-frame@^7.5.5":
version "7.5.5"
resolved "https://registry.yarnpkg.com/@babel/cod
integrity sha512-27d4lZoomVyo51VegxI20xZPuSHusqbQ
dependencies:
"@babel/highlight" "^7.0.0"
"@babel/code-frame@^7.8.3":
version "7.8.3"
resolved "https://registry.yarnpkg.com/@babel/cod
integrity sha512-a9gxpmdXtZEInkCSHUJDLHZVBgb1QS0j
dependencies:
"@babel/highlight" "^7.8.3"
```
becomes
```
"@babel/code-frame@^7.0.0", "@babel/code-frame@^7.5.5", "@babel/code-frame@^7.8.3":
version "7.8.3"
resolved "https://registry.yarnpkg.com/@babel/cod
integrity sha512-a9gxpmdXtZEInkCSHUJDLHZVBgb1QS0j
dependencies:
"@babel/highlight" "^7.8.3"
```
PR Close#36377
The `NgccReflectionHost`s have logic for detecting certain known
declarations (such as `Object.assign()` and TypeScript helpers), which
allows the `PartialEvaluator` to evaluate expressions it would not be
able to statically evaluate otherwise.
In #36089, `DelegatingReflectionHost` was introduced, which delegates to
a TypeScript `ReflectionHost` when reflecting on TypeScript files, which
for ngcc's case means `.d.ts` files of dependencies. As a result, ngcc
lost the ability to detect TypeScript helpers imported from `tslib`,
because `DelegatingReflectionHost` was not able to apply the known
declaration detection logic while reflecting on `tslib`'s `.d.ts` files.
This commit fixes this by ensuring `DelegatingReflectionHost` calls the
`NgccReflectionHost`'s `detectKnownDeclaration()` method as necessary,
even when using the TypeScript `ReflectionHost`.
NOTE:
The previous commit exposed a bug in ngcc that was hidden due to the
tests' being inconsistent with how the `ReflectionHost`s are used in the
actual program. The changes in this commit are verified by ensuring the
failing tests are now passing (hence no new tests are added).
PR Close#36284
In #36089, `DelegatingReflectionHost` was introduced. Under the hood, it
delegates another `NgccReflectionHost` in order to reflect over the
program's source files, while using a different TypeScript
`ReflectionHost` to reflect over `.d.ts` files (which is how external
dependencies are represented in the program).
Previously, the `NgccReflectionHost`s were used directly in tests. This
does not exercise them in the way they are exercised in the actual
program, because (when used directly) they will also reflect on `.d.ts`
files too (instead of delegating to the TypeScript `ReflectionHost`).
This could hide bugs that would happen on the actual program.
This commit fixes this by using the `DelegatingReflectionHost` in the
various `NgccReflectionHost` tests.
NOTE:
This change will cause some of the existing tests to start failing.
These failures demonstrate pre-existing bugs in ngcc, that were hidden
due to the tests' being inconsistent with how the `ReflectionHost`s are
used in the actual program. They will be fixed in the next commit.
PR Close#36284
The `NgccReflectionHost`s have logic for detecting certain known
declarations (such as `Object.assign()` and TypeScript helpers), which
allows the `PartialEvaluator` to evaluate expressions it would not be
able to statically evaluate otherwise.
This commit moves the logic for identifying these known declarations to
dedicated methods. This is in preparation of allowing ngcc's
`DelegatingReflectionHost` (introduced in #36089) to also apply the
known declaration detection logic when reflecting on TypeScript sources.
PR Close#36284
Previously, the download link to the example for the angular element
guide was in the middle of the page. To make it easier for the user to
find the download link, it has been placed to the top of the page.
This commit partially addresses #35459
PR Close#36067
For better overview of modules that cannot be resolved in the
`ts-circular-deps` tool, the warnings are now sorted.
Additionally, an empty line between fixed and new circular dependencies
is now printed. That should slightly help with distinguishing.
PR Close#36361
In version 10, undecorated base classes that use Angular features need
to be decorated explicitly with `@Directive()`. Additionally, derived
classes of abstract directives need to be decorated.
The migration already handles this for undecorated classes that are
not explicitly decorated, but since in V9, abstract directives can be
used, we also need to handle this for explicitly decorated abstract
directives. e.g.
```
@Directive()
export class Base {...}
// needs to be decorated by migration when updating from v9 to v10
export class Wrapped extends Base {}
@Component(...)
export class Cmp extends Wrapped {}
```
PR Close#35339
We don't have an integration test for the `undecorated-classes-with-decorated-fields
migration. For consistency and to cover for the latest changes, we add
it to the `ng update` integration test.
PR Close#35339
The `undecorated-classes-with-decorated-fields` migration has been
introduced with 904a2018e0, but misses
logic for decorating derived classes of undecorated classes which use
Angular features. Example scenario:
```ts
export abstract class MyBaseClass {
@Input() someInput = true;
}
export abstract class BaseClassTwo extends MyBaseClass {}
@Component(...)
export class MyButton extends BaseClassTwo {}
```
Both abstract classes would need to be migrated. Previously, the migration
only added `@Directive()` to `MyBaseClass`, but with this change, it
also decorates `BaseClassTwo`.
This is necessary because the Angular Compiler requires `BaseClassTwo` to
have a directive definition when it flattens the directive metadata for
`MyButton` in order to perform type checking. Technically, not decorating
`BaseClassTwo` does not break at runtime.
We basically want to enforce consistent use of `@Directive` to simplify the
mental model. [See the migration guide](https://angular.io/guide/migration-undecorated-classes#migrating-classes-that-use-field-decorators).
Fixes#34376.
PR Close#35339
The import manager has been created for both the `missing-injectable`
and `undecorated-classes-with-di` migration. Both initial PRs brought
in the manager class, so the manager is duplicated in the schematics.
In order to reduce this duplication, and to expose the manager to other
schematics/migrations, we move it into the shared schematic utils.
PR Close#35339
Moves the `findBaseClassDeclarations` method into the shared
schematic utilities. This method will be useful for future
migrations, and for planned changes to the
`undecorated-classes-with-decorated-fields` migration.
PR Close#35339
Enables the `service-worker` tests on Saucelabs and fixes some issues that were preventing them from running on IE. The issues were:
1. We were serving es2017 code during tests. I've set it to es5.
2. The check which was verifying whether the environment is supported ended up hitting a `require` call in the browser which caused it to fail on browsers that don't support the `URL` API.
PR Close#36129
In Ivy, Angular decorators are compiled into static fields that are
inserted into a class declaration in a TypeScript transform. When
targeting Closure compiler such fields need to be annotated with
`@nocollapse` to prevent them from being lifted from a static field into
a variable, as that would prevent the Ivy runtime from being able to
find the compiled definitions.
Previously, there was a bug in TypeScript where synthetic comments added
in a transform would not be emitted at all, so as a workaround a global
regex-replace was done in the emit's `writeFile` callback that would add
the `@nocollapse` annotation to all static Ivy definition fields. This
approach is no longer possible when ngtsc is running as TypeScript
plugin, as a plugin cannot control emit behavior.
The workaround is no longer necessary, as synthetic comments are now
properly emitted, likely as of
https://github.com/microsoft/TypeScript/pull/22141 which has been
released with TypeScript 2.8.
This change is required for running ngtsc as TypeScript plugin in
Bazel's `ts_library` rule, to move away from the custom `ngc_wrapped`
approach.
Resolves FW-1952
PR Close#35932
Creates a standard model for CLI commands provided by ng-dev.
Allows for us to have any of the tools/scripts extend to be
included in the ng-dev command, or be standalone using the same
yargs parser.
PR Close#36326
Ngcc supports providing a project-level configuration to affect how
certain dependencies are processed and also has a built-in fallback
configuration for some unmaintained packages. Each entry in these
configurations could be scoped to specific versions of a package by
providing a version range. If no version range is provided for a
package, it defaults to `*` (with the intention of matching any
version).
Previously, the installed version of a package was tested against the
version range using the [semver][1] package's `satisfies()` function
with the default options. By default, `satisfies()` does not match
pre-releases (see [here][2] for more details on reasoning). While this
makes sense when determining what version of a dependency to install
(trying to avoid unexpected breaking changes), it is not desired in the
case of ngcc.
This commit fixes it by explicitly specifying that pre-release versions
should be matched normally.
[1]: https://www.npmjs.com/package/semver
[2]: https://github.com/npm/node-semver#prerelease-tags
PR Close#36370
From G3 bug ID: 116443331
The View Engine compiler crashes when it tries to compile a test in JIT mode
that includes the d3-scale-chromatic library [1]. The d3 package initializes
some arrays using the following pattern:
```js
export var scheme = new Array(3).concat(
"d8b365f5f5f55ab4ac",
// ... more entries
).map(colors);
```
The stack trace from the crash is as follows:
```
TypeError: Cannot read property 'visitExpression' of undefined
at ../../../third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts:505:39
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllObjects third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=526
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllExpressions third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=505
at JitEmitterVisitor.AbstractEmitterVisitor.visitLiteralArrayExpr third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=484
at LiteralArrayExpr.visitExpression third_party/javascript/angular2/rc/packages/compiler/src/output/output_ast.ts?l=791
at ../../../third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts:492:19
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllObjects third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=526
at JitEmitterVisitor.AbstractEmitterVisitor.visitLiteralMapExpr third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=490
at LiteralMapExpr.visitExpression third_party/javascript/angular2/rc/packages/compiler/src/output/output_ast.ts?l=819
at ../../../third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts:505:39
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllObjects third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=526
at JitEmitterVisitor.AbstractEmitterVisitor.visitAllExpressions third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=505
at JitEmitterVisitor.AbstractEmitterVisitor.visitInvokeFunctionExpr third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_emitter.ts?l=318
at JitEmitterVisitor.AbstractJsEmitterVisitor.visitInvokeFunctionExpr third_party/javascript/angular2/rc/packages/compiler/src/output/abstract_js_emitter.ts?l=112
at InvokeFunctionExpr.visitExpression third_party/javascript/angular2/rc/packages/compiler/src/output/output_ast.ts?l=440
```
This is because the corresponding output AST for the array is of the form
```ts
[
undefined,
undefined,
undefined,
o.LiteralExpr,
// ...
]
```
The output AST is clearly malformed and breaks the type representation of
`LiteralArrayExpr` in which every entry is expected to be of type `Expression`.
This commit fixes the bug by using a plain `for` loop to iterate over the
entire length of the holey array and convert undefined elements to
`LiteralExpr`.
[1]: https://github.com/d3/d3-scale-chromatic/blob/master/src/diverging/BrBG.js
PR Close#36343
Previously, a bad baseUrl or path mapping passed to an `EntryPointFinder`
could cause the original `sourceDirectory` to be superceded by a higher
directory. This could result in none of the sourceDirectory entry-points being
processed.
Now missing basePaths computed from path-mappings are discarded with
a warning. Further, if the `baseUrl` is the root directory then a warning is
given as this is most likely an error in the tsconfig.json.
Resolves#36313Resolves#36283
PR Close#36331
Pullapprove as added a few new features to allow for us to better
execute our expectation for global approvals. We need to allow for
an expectation that our global approver groups are not in the list
of approved groups. Additionally, since approval groups apply to
all files in the repo, the global approval groups also do not have
conditions defined for them, which means pullapprove verification
need to allow for no conditions need to be defined.
PR Close#36324
Currently the language service only provides support for determining the
type of array-like members when the array-like object is an `Array`.
However, there are other kinds of array-like objects, including
`ReadonlyArray`s and `readonly`-property arrays. This commit adds
support for retrieving the element type of arbitrary array-like objects.
Closes#36191
PR Close#36312
The previous optimizations in #35756 to the
`DirectoryWalkerEntryPointFinder` were over zealous
with regard to packages that have entry-points stored
in "container" directories in the package, where the
container directory was not an entry-point itself.
Now we will also walk such "container" folders as long
as they do not contain `.js` files, which we regard as an
indicator that the directory will not contain entry-points.
Fixes#36216
PR Close#36305
This commit simplifies the `DirectoryWalkerEntryPointFinder` inter-method
calling to make it easier to follow, and also to support controlling
walking of a directory based on its children.
PR Close#36305
Update to clang@1.4.0 to gain support for optional changing and nullish
coalescing. Because this would trigger a change on >1800 files in the
repository, also changes our format enforcement to only be run against
changed files. This will allow us to incramentally roll out the value
add of the upgraded clang format.
PR Close#36203
Since the livestream for ng-conf is not public this year,
(and is only available to ng-conf attendees), we are
removing the link from the angular.io homepage.
Instead, we are now pointing to the ng-conf homepage for
more information.
PR Close#36382
$(location) is not recommended in the bazel docs as depending on context it will either return the value of $(execpath) or $(rootpath). rules_nodejs now supports $(rootpath) and $(execpath) in templated_args of nodejs_binary.
PR Close#36308
`Bluebird.each` and `Bluebird.mapSeries` will accept a callback with `value` parameter,
the `value` should be the item in the array, not array itself.
For example:
```
const arr = [1, 2];
Bluebird.each(arr, function(value, idx) {
console.log(`value: ${value}, idx: ${idx}`);
})
```
the output will be
```
value: 1, idx: 0
value: 2, idx: 1
```
This PR fix the test cases for `each` and `mapSeries` APIs.
PR Close#36295
Prior to this commit, the `packages/core/src/render3/interfaces/query.ts` file used to import `QueryList` using `../../linker`, which contains a lot of re-exports and as a result, this one import caused a lot of circular deps cycles reported by the tool that checks such deps. In other places in the code the `QueryList` is imported using more narrow import (`linker/query_list`), so this commit uses the same pattern. This change allowed to reduce the number of known cycles from 343 to 207, the golden file was updated accordingly.
PR Close#36286
The `dev-infra` scripts were added to the list of sources that should be verified with clang (b07b6edc2a), but the Pullapprove-related scripts that were merged before (83e4a76afa) doesn't pass these checks. This commit updates a couple scripts to have a proper formatting.
PR Close#36287
Previously we only searched for package paths below the set of `basePaths`
that were computed from the `basePath` provided to ngcc and the set of
`pathMappings`.
In some scenarios, such as hoisted packages, the entry-point is not within
any of the `basePaths` identified above. For example:
```
project
packages
app
node_modules
app-lib (depends on lib1)
node_modules
lib1 (depends on lib2)
node_modules
lib2 (depends on lib3/entry-point)
lib3
entry-point
```
When CLI is compiling `app-lib` ngcc will be given
`project/packages/app/node_modules` as the `basePath.
If ngcc is asked to target `lib2`, the `targetPath` will be
`project/node_modules/lib1/node_modules/lib2`.
Since `lib2` depends upon `lib3/entry-point`, ngcc will need to compute
the package path for `project/node_modules/lib3/entry-point`.
Since `project/node_modules/lib3/entry-point` is not contained in the `basePath`
`project/packages/app/node_modules`, ngcc failed to compute the `packagePath`
correctly, instead assuming that it was the same as the entry-point path.
Now we also consider the nearest `node_modules` folder to the entry-point
path as an additional `basePath`. If one is found then we use the first
directory directly below that `node_modules` directory as the package path.
In the case of our example this extra `basePath` would be `project/node_modules`
which allows us to compute the `packagePath` of `project/node_modules/lib3`.
Fixes#35747
PR Close#36249
Prior to this commit, Ivy TestBed was accessing locale ID before `APP_INITIALIZER` functions were called. This execution order is not consistent with the app bootstrap logic in `application_ref.ts`. This commit updates Ivy TestBed execution order to call initializers first (since they might affect `LOCALE_ID` token value) and accessing and setting locale ID after that.
Fixes#36230.
PR Close#36237
The dev-infra pull approve group contained a condition with
the glob having a string concatenation rather than a comma
separated list. This corrects this error, and in another PR
we will correct the verification scripts failure to catch
this.
PR Close#36232
Currently the `ts-circular-deps` tool uses a hard-coded module resolver
that only works in the `angular/angular` repository.
If the tool is consumed in other repositories through the shared
dev-infra package, the module resolution won't work, and a few
resolvable imports (usually cross-entry-points) are accidentally
skipped. For each test, the resolution might differ, so tests can
now configure their module resolution in a configuration file.
Note that we intentionally don't rely on tsconfig's for module
resolution as parsing their mappings rather complicates the
circular dependency tool. Additionally, not every test has a
corresponding tsconfig file.
Also, hard-coding mappings to `@angular/*` while accepting a
path to the packages folder would work, but it would mean
that the circular deps tool is no longer self-contained. Rather,
and also for better flexibility, a custom resolver should be
specified.
PR Close#36226
In #35381, a new Protractor config file was introduced in docs examples,
`protractor-puppeteer.conf.js`, that was only supposed to be used on CI
and not be shipped with the ZIP archives provided for users to download
and experiment with the docs examples locally.
The logic to ignore the `protractor-puppeteer.conf.js` file was
incorrect, resulting in the file being retained in some examples (e.g.
[universal][1]). The problem was not immediately obvious, because most
examples explicitly specify all `**/*.js` files as ignored, but for
other examples the file was retained in the ZIP archive.
This commit fixes the logic to ensure the file is excluded from all docs
examples ZIP archives.
[1]: https://v9.angular.io/generated/zips/universal/universal.zip
PR Close#36018
The `removeSystemJsConfig` and `type` properties (present in some
`zipper.json` files) are now obsolete and are not taken into account by
the example zipper:
- `removeSystemJsConfig` is no longer relevant since most examples have
been migrated to use the CLI.
- `type` is no longer relevant, because the project type is determined
based on the `projectType` property in `example-config.json` files.
This commit removes these properties from `zipper.json` files and
updates the `example-zipper` docs to not mention them.
PR Close#36018
This is done by requesting the refs and shas for the PR when the
env.sh script is run. Additionally, the env.sh script is now setup
to write all of the environment variables created to a cache file
and subsequent loads of the environment load the values from there.
The get-refs-and-shas-for-target.js script now also first attempts
to load the refs and shas from an environment variable before
falling back to requesting from github via the API.
PR Close#36207
`KeyValuePipe` currently accepts `null` values as well as `Map`s and a
few others. However, due to the way in which TS overloads work, a type
of `T|null` will not be accepted by `KeyValuePipe`'s signatures, even
though both `T` and `null` individually would be.
To make this work, each signature that accepts some type `T` has been
duplicated with a second one below it that accepts a `T|null` and
includes `null` in its return type.
Fixes#35743
PR Close#36093
Previously ngcc never preserved whitespaces but this is at odds
with how the ViewEngine compiler works. In ViewEngine, library
templates are recompiled with the current application's tsconfig
settings, which meant that whitespace preservation could be set
in the application tsconfig file.
This commit allows ngcc to use the `preserveWhitespaces` setting
from tsconfig when compiling library templates. One should be aware
that this disallows different projects with different tsconfig settings
to share the same node_modules folder, with regard to whitespace
preservation. But this is already the case in the current ngcc since
this configuration is hard coded right now.
Fixes#35871
PR Close#36189
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
Previously, when an input property was initially set to `undefined` it
would not be correctly recognized as a change (and trigger
`ngOnChanges()`).
This commit ensures that explicitly setting an input to `undefined` is
correctly handled the same as setting the property to any other value.
This aligns the behavior of Angular custom elements with that of the
corresponding components when used directly (not as custom elements).
PR Close#36140
Previously, when an input property was set on an `NgElement` before
instantiating the underlying component, the `SimpleChange` object passed
to `ngOnChanges()` would have `firstChange` set to false, even if this
was the first change (as far as the component instance was concerned).
This commit fixes this by ensuring `SimpleChange#firstChange` is set to
true on first change, regardless if the property was set before or after
instantiating the component. This alignthe behavior of Angular custom
elements with that of the corresponding components when used directly
(not as custom elements).
Jira issue: [FW-2007](https://angular-team.atlassian.net/browse/FW-2007)
Fixes#36130
PR Close#36140
When computing the dependencies between packages which are not in
node_modules, we may need to rely upon path-mappings to find the path
to the imported entry-point.
This commit allows ngcc to use the path-mappings from a tsconfig
file to find dependencies. By default any tsconfig.json file in the directory
above the `basePath` is loaded but it is possible to use a path to a
specific file by providing the `tsConfigPath` property to mainNgcc,
or to turn off loading any tsconfig file by setting `tsConfigPath` to `null`.
At the command line this is controlled via the `--tsconfig` option.
Fixes#36119
PR Close#36180
I was not able to reproduce IE 10/11 failrue of the disabled
tests on SauceLabs any more. I did some cleanup of the test
in question but I doubt it was the root cause of the problem.
PR Close#35962
The `app-list-item` component sounds like it is used for a single
item, however it renders a list of items. There were also
several changes in the documentation, where it was becoming
confusing if the `app-list-item` is using a single item or multiple
items. This commit fixes this issue. It renames the component and its
respective properties to make sure that the intention is very clear.
Closes#35598
PR Close#35601
Previously, an expansion case could only start with an alpha numeric character.
This commit fixes this by allowing an expansion case to start with any character
except `}`.
The [ICU spec](http://userguide.icu-project.org/formatparse/messages) is pretty vague:
> Use a "select" argument to select sub-messages via a fixed set of keywords.
It does not specify what can be a "keyword" but from looking at the surrounding syntax it
appears that it can indeed be any string that does not contain a `}` character.
Closes#31586
PR Close#36123
Changes the positional params for the circular deps tooling to
use camelCase as it requires being defined in camelCase while
in strict mode. Additionally, remove the `version()` call as
the boolean arguement does not exist in current versions and
throws errors on execution.
PR Close#36165
to run ts-circular-deps via installed node_modules, we needed to set
the hashbang of the script to be a node environment, and discover the
project directory based on where the script is run rather than the
scripts file location.
PR Close#36165
1. During reading the documentation I found some code examples that were refering to the class properties via methods, but without specifying the context `this`.
2. The 'onInvoke' hook was duplicated
3. A minor typo on `Zones and execution contexts` section
4. A minor typo on `Zones and async lifecycle hooks` section
PR Close#36138
Previously, all StackBlitz examples included the default dependencies
for `cli`-type projects. However, different example types may have
different `package.json` files with different dependencies.
For example, the [boilerplate `package.json`][1] for `elements` examples
includes an extra dependency on `@angular/elements`.
This commit changes `StackblitzBuilder` to use the dependencies that
correspond to each example type.
(NOTE: Manually verified the changes.)
Jira issue: [FW-2002][2]
[1]: https://github.com/angular/angular/blob/05d058622/aio/tools/examples/shared/boilerplate/elements/package.json
[2]: https://angular-team.atlassian.net/browse/FW-2002
PR Close#36071
This commit propagates the correct value span in an ExpressionBinding of
a microsyntax expression to ParsedProperty, which in turn porpagates the
span to the template ASTs (both VE and Ivy).
PR Close#36133
A few leftovers from from `@bazel/bazel` to `@bazel/bazelisk` migration
are still there. This commit fixes those, so that the repository no
longer relies on `@bazel/bazel`.
PR Close#36132
When using `platformBrowserDynamic().bootstrapModule()`, it is possible
to set `defaultEncapsulation` and `preserveWhitespaces` as default
configuration to influence how components are compiled. When compiling
components in JIT with Ivy, these options were not taken into account.
This commit publishes the options to be globally available, so that the
lazy compilation of JIT components has access to the configured
bootstrap options. Note that this approach does not allow changing the
options once they have been set, as Ivy's compilation model does not
allow for multiple compilations to exist at the same time.
For applications that bootstrap multiple modules, it is now required
to provide the exact same bootstrap options. An error is logged if
incompatible bootstrap options are provided, in which case the updated
options will be ignored.
Fixes#35230
Resolved FW-1838
PR Close#35534
The `ng_rollup_bundle` rule currently is only consumed in the
Angular framework repository. This means that Angular packages
are built from source, and ngcc is never needed to build rollup
bundles using Ivy.
Though, this rule is planned to be shared with other repositories
to support common benchmark code. This means that ngcc needs to be
handled as these other repositories cannot build Angular from source,
but instead consume Angular through NPM (with ngcc enabling Ivy).
The `ng_rollup_bundle` rule needs to dynamically prioritize `ngcc`
generated main resolution fields if `--define=angular_ivy_enabled=True`
is set (or with the alias: `--config=ivy`).
ds
PR Close#36044
When two entry-points overlap, ngcc may attempt to process some
files twice. Previously, when this occured ngcc would just exit with an
error preventing any other entry-points from being processed.
This commit changes ngcc so that if `errorOnFailedEntryPoint` is false, it will
simply log an error and continue to process entry-points. This is useful when
ngcc is processing the entire node_modules folder and there are some invalid
entry-points that the project doesn't actually use.
PR Close#36083
Previously, when an entry-point contained code that caused its compilation
to fail, ngcc would exit in the middle of processing, possibly leaving other
entry-points in a corrupt state.
This change adds a new `errorOnFailedEntryPoint` option to `mainNgcc` that
specifies whether ngcc should exit immediately or log an error and continue
processing other entry-points.
The default is `false` so that ngcc will not error but continue processing
as much as possible. This is useful in post-install hooks, and async CLI
integration, where we do not have as much control over which entry-points
should be processed.
The option is forced to true if the `targetEntryPointPath` is provided,
such as the sync integration with the CLI, since in that case it is targeting
an entry-point that will actually be used in the current project so we do want
ngcc to exit with an error at that point.
PR Close#36083
Later when we implement the ability to continue processing when tasks have
failed to compile, we will also need to avoid processing tasks that depend
upon the failed task.
This refactoring exposes this list of dependent tasks in a way that can be
used to skip processing of tasks that depend upon a failed task.
It also changes the blocking model of the parallel mode of operation so
that non-typings tasks are now blocked on their corresponding typings task.
Previously the non-typings tasks could be triggered to run in parallel to
the typings task, since they do not have a hard dependency on each other,
but this made it difficult to skip task correctly if the typings task failed,
since it was possible that a non-typings task was already in flight when
the typings task failed. The result of this is a small potential degradation
of performance in async parallel processing mode, in the rare cases that
there were not enough unblocked tasks to make use of all the available
workers.
PR Close#36083
Moving the definition of the `onTaskCompleted` callback into `mainNgcc()`
allows it to be configured based on options passed in there more easily.
This will be the case when we want to configure whether to log or throw
an error for tasks that failed to be processed successfully.
This commit also creates two new folders and moves the code around a bit
to make it easier to navigate the code§:
* `execution/tasks`: specific helpers such as task completion handlers
* `execution/tasks/queues`: the `TaskQueue` implementations and helpers
PR Close#36083
Similarly to what is done in `angular/components`, we should
cache the downloaded Bazel version (from `bazelisk`).
This reduces the overhead of downloading Bazel, and also avoids
the dependency on the external download server. We should avoid
external server dependencies as much as possible (see how the yarn
registry was flaky in the past).
PR Close#36098
The AOT compilation section of the `ngUpgrade` guide was
outdated/non-applicable. This commit hides the section to avoid confusion.
Fixing the section and re-introducing it is being tracked in #35989.
PR Close#36015
Previously, the `package.json` files added as boilerplate to docs
example projects of type `systemjs` were incorrect/outdated. They
contained unused dependencies and npm scripts and omitted used
dependencies.
This is not a big issue, because these examples are not offered as live
StackBlitz examples or downloadable ZIP archives, but having incorrect
`package.json` files is confusing and makes it more complicated to
update these examples.
This commit updates the `package.json` templates for the `systemjs` docs
examples and other configuration files to include used dependencies (and
remove unused ones). It also removes unused npm scripts.
PR Close#36015
Update dependencies.
Also, disable AOT tests for `systemjs`-type examples in Ivy mode,
because our current setup does not work with v9. See #35989 for details.
Fixes#34382Fixes#34383
PR Close#36015
Update `tsconfig[.*].json`.
Also, all make necessary changes to ensure the example apps can be
successfully built with the new, stricter type-checking options.
PR Close#36015
In the example apps used in the `ngUpgrade` guide, the AngularJS files
are loaded in `index.html` from `https://code.angularjs.org/`. Latest
browsers prevent loading the scripts from a page running on localhost
due to CORS:
```
Access to script at 'https://code.angularjs.org/1.5.5/angular.js' from origin
'http://localhost:9876' has been blocked by CORS policy: No 'Access-Control-Allow-Origin'
header is present on the requested resource.
```
NOTE:
Loading the files from `code.angularjs.org` is not mentioned in the
guide, therefore it is not needed to mention this config change there.
PR Close#36015
The `build` and `run` properties in `example-config.json` are only used
in example projects of type `systemjs`. In CLI-type projects, `build`
and `run` are ignored.
PR Close#36015
The `unittesting` property in `example-config.json` is a remnant of the
setup (before `aio/` was moved into the `angular/angular` repo) and has
no effect any more.
PR Close#36015
The docs examples tests are run both with Ivy turned off and on. When
Ivy is turned on, ngcc is used to convert all dependencies (including
the Angular framework packages to Ivy).
Previously, in order to speed things up, the `test_docs_examples_ivy` CI
job would use Angular packages built with Ivy (from
`dist/packages-dist-ivy-aot`). This however was a deviation from what
happens in real-world applications.
This commit changes the `test_docs_examples_ivy` CI job to always use
the regular Angular packages (as published on npm) and use ngcc to
convert them to Ivy.
Relevant discussion:
https://github.com/angular/angular/pull/35091#discussion_r373775396
PR Close#36015
When ngcc is compiling an entry-point, it uses a `ReflectionHost` that
is specific to its format, e.g. ES2015, ES5, UMD or CommonJS. During the
compilation of that entry-point however, the reflector may be used to
reflect into external libraries using their declaration files.
Up until now this was achieved by letting all `ReflectionHost` classes
consider their parent class for reflector queries, thereby ending up in
the `TypeScriptReflectionHost` that is a common base class for all
reflector hosts. This approach has proven to be prone to bugs, as
failing to call into the base class would cause incompatibilities with
reading from declaration files.
The observation can be made that there's only two distinct kinds of
reflection host queries:
1. the reflector query is about code that is part of the entry-point
that is being compiled, or
2. the reflector query is for an external library that the entry-point
depends on, in which case the information is reflected
from the declaration files.
The `ReflectionHost` that was chosen for the entry-point should serve
only reflector queries for the first case, whereas a regular
`TypeScriptReflectionHost` should be used for the second case. This
avoids the problem where a format-specific `ReflectionHost` fails to
handle the second case correctly, as it isn't even considered for such
reflector queries.
This commit introduces a `ReflectionHost` that delegates to the
`TypeScriptReflectionHost` for AST nodes within declaration files,
otherwise delegating to the format-specific `ReflectionHost`.
Fixes#35078
Resolves FW-1859
PR Close#36089
The format property for ES5 bundles should be "module" or "es5"/"esm5",
but was "main" instead. The "main" property is appropriate for CommonJS
and UMD bundles, not for ES5 bundles.
PR Close#36089
Currently on Windows, it's not possible to approve goldens in
`ts-api-guardian`. This is because paths are resolved relatively
to the working directory. In Windows, golden files are resolved
to the actual workspace directory. The current logic tries to
compute a relative path to the runfile from the working directory.
This causes the file paths to have a lot of parent directory
path segments. Eventually, when joined with the build workspace
directory, the paths end up being incorrect. e.g.
```
fileName = ../../../../../../projects/angular/golden/<..>/common.d.ts`
outFile = BUILD_WORKSPACE_DIR + fileName;
```
To fix this, we no longer deal with confusing relative paths, but
instead always use absolute file system paths.
Additionally, this fixes that new goldens are generated at the wrong
location on all platforms.
PR Close#36115
Also add two targets to make it more convienent to tail & dump the sauce service logs: //tools/saucelabs:sauce_service_tail & //tools/saucelabs:sauce_service_log
PR Close#36109
Sets up a golden file for the TypeScript circular dependencies for
source files inside of the `packages/` folder.
Also sets up the appropriate Yarn shorthand scripts, and a codeowner
group that is soley responsible for verifying changes to the golden.
PR Close#35647
The dev-infra package currently uses rollup for packaging. This has been
done initially as a way to workaround manifest paths being used in the
AMD JavaScript output.
The actual solution to this problem is setting module names that match
the `package.json` name. This ensures that the package can be consumed
correctly in Bazel, and through NPM. This allows us to get rid of the
rollup bundling, and we don't need to hard-code which dependencies
should be external or included.
Additionally, tools that are part of `dev-infra` can now specify
their external dependencies simply in the `package.json`. To reduce
version duplication, and out-of-sync versions, a new genrule has been
created that syncs the versions with the top-level project
`package.json`.
PR Close#35647
Creates a tool for validating TypeScript circular dependencies. The tool
has been designed in a way that allows us to slowly burn down the amount
of circular dependencies while ensuring that we don't regress.
The tool doesn't rely on Madge since it doesn't provide a programmatic
way for doing path mapping. We need path mapping since we also want to
check for cycles across different entry-points or packages. The tool
uses the TypeScript AST to manually collect cycles. This code is not
a lot of bloat and also gives us more flexibility (if we ever need it).
Closes#35041.
PR Close#35647
This reverts commit f862536ec4.
Reverted due to test failures that have shown up in the Windows CI Jobs
that don't run on pull requests. A follow-up will be sent that re-adds
the changes w/ fixes for the windows test job.
PR Close#36113
Currently on Windows, it's not possible to approve goldens in
`ts-api-guardian`. This is because paths are resolved relatively
to the working directory. In Windows, golden files are resolved
to the actual workspace directory. The current logic tries to
compute a relative path to the runfile from the working directory.
This causes the file paths to have a lot of parent directory
path segments. Eventually, when joined with the build workspace
directory, the paths end up being incorrect. e.g.
```
fileName = ../../../../../../projects/angular/golden/<..>/common.d.ts`
outFile = BUILD_WORKSPACE_DIR + fileName;
```
To fix this, we no longer deal with confusing relative paths, but
instead always use absolute file system paths.
Additionally, this fixes that new goldens are generated at the wrong
location on all platforms.
PR Close#36096
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
PR Close#35975
Updates to the latest `@bazel/ibazel` version that properly
resolves local `@bazel/bazelisk` installations.
The support for this temporarily broke from `0.12.0` to `0.12.2`.
https://github.com/bazelbuild/bazel-watcher/issues/352.
PR Close#36097
Create a common config file loading utility function and the
necessary util directory. This util directory can provide common
utility functions for usage inside of the dev-infra package.
PR Close#36091
We don't run tests on Browserstack for this repository. Also the
badge was referring to a non-existent project.
This removes the badge since we don't need it anymore, and rather
we should generate a new one for repositories like `angular/components`
where browserstack is actually used, and where the badge can provide
useful information.
Closes#28287.
PR Close#35684
This commit improves the context of a non-callable function error
message by providing the affected call target and its non-callable type.
PR Close#35271
This commit performs a few updates to internal functions that would be required in upcoming changes to support synthetic host bindings in Directives.
* the `elementPropertyInternal` function was refactored to accept renderer as an argument (prior to that, there was a function that loads the renderer in some specific way for animation bindings)
* `elementPropertyInternal`, `elementAttributeInternal` and `listenerInternal` functions were updated to have a fixed set of arguments (for better performance)
* `elementPropertyInternal` and `elementAttributeInternal` functions were updated to take `tNode` as an argument instead of passing node index (that was used to retrieve `tNode` internally), in some cases we already have `tNode` available or we can retrieve it from the state
The refactoring was triggered by the need to pass different renderers to the `elementPropertyInternal` to support synthetic host bindings in Directives (see this comment for additional context: https://github.com/angular/angular/pull/35568/files#r388034584).
PR Close#35884
This has a couple benefits:
- we now use a .bazelversion file rather than package.json to pin the version of bazel we want. This means even if you install bazel on your computer rather than via yarn, you'll still get a warning if your bazel version is wrong.
- you no longer end up downloading three copies of bazel due to bugs in both npm and yarn where they download all tarballs before checking the metadata to see which are usable on the local platform.
- bazelisk correctly handles the tools/bazel trick for wrapping functionality, which we want to use to instrument developer build latencies
PR Close#36078
This commit propagates the `sourceSpan` and `valueSpan` of a `VariableBinding`
in a microsyntax expression to `ParsedVariable`, and subsequently to
View Engine Variable AST and Ivy Variable AST.
Note that this commit does not propagate the `keySpan`, because it involves
significant changes to the template AST.
PR Close#36047
To create the symbols of a module, the static symbol resolver first gets
all the symbols loaded in the module by an export statement. For `export
* from './module'`-like statements, all symbols from `./module` must be
loaded. In cases where the exporting module is actually the same module
that the export statement is in, this causes an unbounded recursive
resolution of the same module.
Exports of the same module are not needed, as their symbols will be
resolved when the symbols in the module metadata's `metadata` key is
explored.
This commit resolves the unbounded recursion by loading exporting
modules only if they differ from the module currently being resolved.
Closes https://github.com/angular/vscode-ng-language-service/issues/593
PR Close#35262
Prior to this commit, Ivy compiler didn't handle directive inputs with interpolations located on `<ng-template>` elements (e.g. `<ng-template dir="{{ field }}">`). That was the case for regular inputs as well as inputs that should be processed via i18n subsystem (e.g. `<ng-template i18n-dir dir="Hello {{ name }}">`). This commit adds support for such expressions for explicit `<ng-template>`s as well as a number of tests to confirm the behavior.
Fixes#35752.
PR Close#35984
Close#31687, #31684
Zone.js patches rxjs internal `_subscribe` and `_unsubscribe` methods, but zone.js doesn't do null check, so in some operator such as `retryWhen`, the `_unsubscribe` will be set to null, and will cause
zone patched version throw error.
In this PR, if `_subscribe` and `_unsubscribe` is null, will not do the patch.
PR Close#35990
`zone.js` added `removeAllListeners` and `eventListeners` methods in `EventTarget.prototype`, but those methods only exists when user import `zone.js` and also enables `EventTarget` monkey patching.
If user:
1. Does not import `zone.js` and uses `noop` zone when bootstrapping Angular app. OR
2. Disable monkey patching of `EventTarget` patch by defining `__Zone_disable_EventTarget = true`.
Then `removeAllListeners` and `eventListeners` methods will not be present.
PR Close#35954
Close#27840.
By default, `zone.js` wrap uncaught promise error and wrap it to a new Error object with some
additional information includes the value of the error and the stack trace.
Consider the following example:
```
Zone.current
.fork({
name: 'promise-error',
onHandleError: (delegate: ZoneDelegate, current: Zone, target: Zone, error: any): boolean => {
console.log('caught an error', error);
delegate.handleError(target, error);
return false;
}
}).run(() => {
const originalError = new Error('testError');
Promise.reject(originalError);
});
```
The `promise-error` zone catches a wrapped `Error` object whose `rejection` property equals
to the original error, and the message will be `Uncaught (in promise): testError....`,
You can disable this wrapping behavior by defining a global configuraiton
`__zone_symbol__DISABLE_WRAPPING_UNCAUGHT_PROMISE_REJECTION = true;` before importing `zone.js`.
PR Close#35873
Monkey patch `MessagePort.prototype.onmessage` and `MessagePort.prototype.onmessageerror` to make
these properties's value(callback function) run in the zone when these value are set.
PR Close#34610
Previously, calculations related to the position of and difference between
SegmentMarkers required extensive computation based around the line,
line start positions and columns of each segment.
PR Close#36027
The merging algorithm needs to find, for a given segment, what the next
segment in the source file is. This change modifies the `generatedSegment`
properties in the mappings so that they have a link directly to the following
segment.
PR Close#36027
By computing and caching the start of each line, rather than the length
of each line, we can save a lot of duplicated computation in the `segmentDiff()`
and `offsetSegment()` functions.
PR Close#36027
Previously the list of original segments that was searched for incoming
mappings did not differentiate between different original source files.
Now there is a separate array of segments to search for each of the
original source files.
PR Close#36027
The `@angular/core` package has a large number of source files
and mappings which exposed performance issues in the new source-map
flattening algorithm.
This change uses a binary search (rather than linear) when finding
matching mappings to merge. Initial measurements indicate that this
reduces processing time for `@angular/core` by about 50%.
PR Close#36027
Prior to this commit, i18n runtime logic relied on the assumption that provided translation is syntactically correct, specifically around ICU syntax. However provided translations might contain some errors that lead to parsing failure. Specifically when translation contains curly braces, runtime i18n logic tries to parse them as an ICU expression and fails. This commit validates ICU parsing result (making sure it was parsed correctly) and throws an error if parsing error happens. The error that is thrown also contains translated message text for easier debugging.
Note: the check and the error message introduced in this PR is a safeguard against the problem that led to unhandled i18n runtime logic crash. So the framework behavior remains the same, we just improve the error message and it should be safe to merge to the patch branch.
Resolves#35689.
PR Close#35923
In version 9.1, this is no longer needed as in the CLI, NGCC async has been integrated which will run during `ng build/ng serve/ng test`.
Reference: TOOL-1340
PR Close#36049
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
* integration tests target definitions in integration/BUILD.bazel updated to use a single dict
* payload tracking for integration tests updated to work under Bazel
* legacy integration_test CI job removed
* integration/run_tests.sh script no longer used in CI so it has been updated for running integration tests locally in the legacy way
PR Close#35985
Close#35878.
Before zone.js 0.10, the rollup config would refer to `rxjs` when bundling `zone-patch-rxjs.js`
From zone.js 0.10, we started to use bazel to build `zone-patch-rxjs.js` and the configuration was wrongly defined to include a copy of `rxjs` in the `zone-patch-rxjs.js`.
PR Close#35983
In some scenarios it is useful for the developer to indicate
to ngcc that it should not use the entry-point manifest
file, and instead write a new one.
In the ngcc command line tool, this option is set by specfying
```
--invalidate-entry-point-manifest
```
PR Close#35931
The `DirectoryWalkerEntryPointFinder` has to traverse the
entire node_modules library everytime it executes in order to
identify the entry-points that need to be processed. This is
very time consuming (several seconds for big projects on
Windows).
This commit changes the `DirectoryWalkerEntryPointFinder` to
use the `EntryPointManifest` to store the paths to entry-points
that were found when doing this initial node_modules traversal
in a file to be reused for subsequent calls.
This dramatically speeds up ngcc processing when it has been run once
already.
PR Close#35931
The new `EntryPointManifest` class can read and write a
manifest file that contains all the paths to the entry-points
that have been found in a node_modules folder.
This can be used to speed up finding entry-points in
subsequent runs.
The manifest file stores the ngcc version and hashes of
the package lock-file and project config, since if these
change the manifest will need to be recomputed.
PR Close#35931
Today, the language service infers the type of variables bound to the
"ngIf" template context member of an NgIf directive, but does not do the
same for the the "$implicit" context member. This commit adds support
for that.
Fixes https://github.com/angular/vscode-ng-language-service/issues/676
PR Close#35941
This commit adds fine-grained text spans to TemplateBinding for microsyntax expressions.
1. Source span
By convention, source span refers to the entire span of the binding,
including its key and value.
2. Key span
Span of the binding key, without any whitespace or keywords like `let`
The value span is captured by the value expression AST.
This is part of a series of PRs to fix source span mapping in microsyntax expression.
For more info, see the doc https://docs.google.com/document/d/1mEVF2pSSMSnOloqOPQTYNiAJO0XQxA1H0BZyESASOrE/edit?usp=sharing
PR Close#35897
The `contributing-stats/get-data.ts` script, which is used to retrieve
org-wide contribution data, returned the contributors in retrieval
order.
This commit ensures contributors are ordered alphabetically, which makes
it easier to find the stats for a specific contributor.
PR Close#35997
This commit merges the two `.api-body` style blocks, removing duplicate
styles and re-ordering sub-blocks (to group relevant styles together).
It should not affect styling.
PR Close#31574
This commit adds a debugging section to the existing
SauceLabs README. It lays out tips to debug and resolve
a few issues that I encountered while running SauceLabs
locally this morning. It also adds some clarification
to the steps in the beginning.
PR Close#35704
95c729f5d1 added support for TypeScript v3.8. Since
these versions are now supported, the `typescript` peer dependency
range in `@angular/bazel` needs to be updated to not report unsatisfied
peer dependencies.
PR Close#36013
Currently, when running the ngcc binary directly and provide an invalid option ngcc will not error out and the user might have a hard time telling why ngcc is behaving not as expected.
With this change we now output an actionable error:
```
yarn ngcc --unknown-option
Options:
--version Show version number [boolean]
-s, --source A path (relative to the working directory)
of the `node_modules` folder to process.
[default: "./node_modules"]
-p, --properties An array of names of properties in
package.json to compile (e.g. `module` or
`es2015`)
Each of these properties should hold the
path to a bundle-format.
If provided, only the specified properties
are considered for processing.
If not provided, all the supported format
properties (e.g. fesm2015, fesm5, es2015,
esm2015, esm5, main, module) in the
package.json are considered. [array]
-t, --target A relative path (from the `source` path) to
a single entry-point to process (plus its
dependencies).
--first-only If specified then only the first matching
package.json property will be compiled.
[boolean]
--create-ivy-entry-points If specified then new `*_ivy_ngcc`
entry-points will be added to package.json
rather than modifying the ones in-place.
For this to work you need to have custom
resolution set up (e.g. in webpack) to look
for these new entry-points.
The Angular CLI does this already, so it is
safe to use this option if the project is
being built via the CLI. [boolean]
--legacy-message-ids Render `$localize` messages with legacy
format ids.
The default value is `true`. Only set this
to `false` if you do not want legacy
message ids to
be rendered. For example, if you are not
using legacy message ids in your
translation files
AND are not doing compile-time inlining of
translations, in which case the extra
message ids
would add unwanted size to the final source
bundle.
It is safe to leave this set to true if you
are doing compile-time inlining because the
extra
legacy message ids will all be stripped
during translation.
[boolean] [default: true]
--async Whether to compile asynchronously. This is
enabled by default as it allows
compilations to be parallelized.
Disabling asynchronous compilation may be
useful for debugging.
[boolean] [default: true]
-l, --loglevel The lowest severity logging message that
should be output.
[choices: "debug", "info", "warn", "error"]
--invalidate-entry-point-manifest If this is set then ngcc will not read an
entry-point manifest file from disk.
Instead it will walking the directory tree
as normal looking for entry-points, and
then write a new manifest file.
[boolean] [default: false]
--help Show help [boolean]
Unknown arguments: unknown-option, unknownOption
```
PR Close#36010
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
Pure pipes are not invoked again until their arguments are modified. The same
rule should apply to pure pipes that throw an exception. This fix ensures that
a pure pipe is not re-invoked if it throws an exception and arguments are not
changed.
PR Close#35827
This commit adds support in the Angular monorepo and in the Angular
compiler(s) for TypeScript 3.8. All packages can now compile with
TS 3.8.
For most of the repo, only a handful few typings adjustments were needed:
* TS 3.8 has a new `CustomElementConstructor` DOM type, which enforces a
zero-argument constructor. The `NgElementConstructor` type previously
declared a required `injector` argument despite the fact that its
implementation allowed `injector` to be optional. The interface type was
updated to reflect the optionality of the argument.
* Certain error messages were changed, and expectations in tests were
updated as a result.
* tsserver (part of language server) now returns performance information in
responses, so test expectations were changed to only assert on the actual
body content of responses.
For compiler-cli and schematics (which use the TypeScript AST) a major
breaking change was the introduction of the export form:
```typescript
export * as foo from 'bar';
```
This is a `ts.NamespaceExport`, and the `exportClause` of a
`ts.ExportDeclaration` can now take this type as well as `ts.NamedExports`.
This broke a lot of places where `exportClause` was assumed to be
`ts.NamedExports`.
For the most part these breakages were in cases where it is not necessary
to handle the new `ts.NamedExports` anyway. ngtsc's design uses the
`ts.TypeChecker` APIs to understand syntax and so automatically supports the
new form of exports.
The View Engine compiler on the other hand extracts TS structures into
metadata.json files, and that format was not designed for namespaced
exports. As a result it will take a nontrivial amount of work if we want to
support such exports in View Engine. For now, these new exports are not
accounted for in metadata.json, and so using them in "folded" Angular
expressions will result in errors (probably claiming that the referenced
exported namespace doesn't exist).
Care was taken to only use TS APIs which are present in 3.7/3.6, as Angular
needs to remain compatible with these for the time being.
This commit does not update angular.io.
PR Close#35864
Adding a script that compares commits in master and patch branches and finds a delta between them. This is useful for release reviews, to make sure all the necessary commits are included into the patch branch and there is no discrepancy.
PR Close#35130
This script gets all of the current users for the organization and retrieves
information about PR/Issue contributions/authorship since a provided date.
Returning this information as a CSV.
PR Close#35834
Prior to this commit, while calculating the scope for a module, Ivy compiler processed `declarations` field first and `imports` after that. That results in a couple issues:
* for Pipes with the same `name` and present in `declarations` and in an imported module, Pipe from imported module was selected. In View Engine the logic is opposite: Pipes from `declarations` field receive higher priority.
* for Directives with the same selector and present in `declarations` and in an imported module, we first invoked the logic of a Directive from `declarations` field and after that - imported Directive logic. In View Engine, it was the opposite and the logic of a Directive from the `declarations` field was invoked last.
In order to align Ivy and View Engine behavior, this commit updates the logic in which we populate module scope: we first process all imports and after that handle `declarations` field. As a result, in Ivy both use-cases listed above work similar to View Engine.
Resolves#35502.
PR Close#35850
Fixes the following issues which caused the `elements` unit tests to break on IE:
1. `core.js` wasn't included which caused an error about `Promise` and `Symbol` to be thrown.
2. We were using a version of `@webcomponents/custom-elements` which was shipping ES6 code to npm. As a result, IE was throwing a syntax error.
PR Close#35940
This commit splits the ngtsc `core` package's api entrypoint, which
previously was a single `api.ts` file, into an api/ directory with multiple
files. This is done to isolate the parts of the API definitions pertaining
to the public-facing `angularCompilerOptions` field in tsconfig.json into a
single file, which will enable a public API guard test to be added in a
future commit.
PR Close#35885
Updates the commit that the `components-repo-unit-tests` job runs
against to the latest available commit at time of writing.
The motivation for updating is that a lot of changes have been made, and
that a upcoming framework PR that fixes check no changes for OnPush
components exposed a test failure in `angular/components`.
See: eae5cf886d
PR Close#35961
`@angular/platform-browser/animations` has a dependency on `@angular/animations` however, this is not listed in `peerDependencies`
With this change we add this package as an optional peerDependency as it's only required when using the `@angular/platform-browser/animations` entrypoint.
Fixes#35888
PR Close#35949
This commit accomplishes two tasks:
- Fixes the span of queried pipes to only be applied on pipe names
- By consequence, fixes how pipes are located in arguments (previously,
pipes with arguments could not be found because the span of a pipe
uses a relative span, while the template position is absolute)
The screenshots attached to the PR for this commit demonstrate the
change.
Closes https://github.com/angular/vscode-ng-language-service/issues/677
PR Close#35986
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
XLIFF translation files can contain multiple `<file>` elements,
each of which contains translations. In ViewEngine all these
translations are merged into a single translation bundle.
Previously in Ivy only the translations from the last `<file>`
element were being loaded. Now all the translations from each
`<file>` are merged into a single translation bundle.
Fixes#35839
PR Close#35936
TemplateAst values are currently typed as the base class AST, but they
are actually constructed with ASTWithSource. Type them as such, because
ASTWithSource gives more information about the consumed expression AST
to downstream customers (namely, the expression AST source).
Unblocks #35271
PR Close#35892
This commit improves the `canParse()` method to check that the file is
valid XML and has the expected root node. Previously it was relying upon
a regular expression to do this.
PR Close#35793
Previously, the `Xliff2TranslationParser` only matched files that had a narrow
choice of extensions (e.g. `xlf`) and also relied upon a regular expression
match of an optional XML namespace directive.
This commit relaxes the requirement on both of these and, instead, relies
upon parsing the file into XML and identifying an element of the form
`<xliff version="2.0">` which is the minimal requirement for such files.
PR Close#35793
Previously, the `Xliff1TranslationParser` only matched files that had a narrow
choice of extensions (e.g. `xlf`) and also relied upon a regular expression
match of an optional XML namespace directive.
This commit relaxes the requirement on both of these and, instead, relies
upon parsing the file into XML and identifying an element of the form
`<xliff version="1.2">` which is the minimal requirement for such files.
PR Close#35793
This modifies the internal (but shared with CLI) API for loading/parsing
translation files. Now the parsers will return a new `Diagnostics` object
along with any translations and locale extracted from the file.
It is up to the caller to decide what to do about this, if there are errors
it is suggested that an error is thrown, which is what the `TranslationLoader`
class does.
PR Close#35793
Calling `tick(0, null)` defaults `processNewMacroTasksSynchronously` flag to `true`, however calling `tick(0, null, {})` defaults `processNewMacroTasksSynchronously` to `undefined`. This is undesirable behavior since unless the flag is set explicitly it should still default to `true`.
PR Close#35814
Currently, the `ng_module` rule incorrectly uses manifest paths for
generated imports from the Angular compiler.
This breaks packaging as prodmode output (i.e. `esnext`) is copied in
various targets (`es5` and `es2015`) to the npm package output.
e.g. imports are generated like:
_node_modules/my-pkg/es2015/imports/public-api.js_
```ts
import * as i1 from "angular/packages/bazel/test/ng_package/example/imports/second";
```
while it should be actually:
```ts
import * as i1 from "./second";
```
The imports can, and should be relative so that the files are
self-contained and do not rely on custom module resolution.
PR Close#35841
In some cases, we want to test the AIO app or docs examples against the
locally built Angular packages (for example to ensure that the changes
in a commit do not introduce a breaking change). In order to achieve
this, we have the `ng-packages-installer` script that handles updating
a project's `package.json` file to use the locally built Angular
packages (and appropriate versions for their (dev-/peer-)dependencies).
Previously, `ng-packages-installer` would only consider the locally
built Angular packages (from `dist/packages-dist/`). However, given that
Zone.js is now part of the `angular/angular` repo, it makes sense to
also use the locally built Zone.js package (from `dist/zone.js-dist/`).
Otherwise, the tests might fail for commits that update both the Angular
packages (and related docs examples) and the Zone.js package. An example
of such a simultaneous change (that would have broken tests) is #33838.
This commit updates the script to install the locally built Zone.js
package (in addition to the Angular ones). The commit ensures that the
Zone.js package will always be available alongside the Angular packages
(i.e. that the Zone.js package will be built by the same script that
builds the Angular packages and that the `dist/zone.js-dist/` directory
will be cached on CI).
Note: This problem was discovered while enabling docs examples unit
tests in #34374.
PR Close#35858
The options for `flatModuleId` and `flatModuleOutFile` had been removed in the CLI
from generated libraries with 718ee15b9a.
This has been done because `ng-packagr` (which is used to build the
libraries) automatically set these options in-memory when it compiles the library.
No migration has been created for this because there was no actual need to get rid of
this. Keeping the options in the library `tsconfig` does not cause any problems unless
the `tsconfig` is used outside of `ng-packagr`. This was not anticipated, but is now
commonly done in `ng update` migrations.
The `ng update` migrations try to create an instance of the `AngularCompilerProgram` by
simply parsing the `tsconfig`. The migrations make the valid assumption that `tsconfig` files
are not incomplete/invalid. They _definitely_ are in the file system though. It just works for
libraries because `ng-packagr` in-memory completes the invalid `tsconfig` files, so that they
can be passed to the `@angular/compiler-cli`.
We can't have this logic in the `ng update` migrations because it's
out-of-scope for individual migrations to distinguish between libraries
and applications. Also it would be out-of-scope to parse the
`ng-packagr` configuration and handle the tsconfig in-memory completion.
As a workaround though, we can remove the flat-module bundle options
in-memory when creating the compiler program. This is acceptable since
we don't emit the program and the flat module bundles are not needed.
Fixes#34985.
PR Close#35824
Creates the scaffolding for an @angular/dev-infra-private package
which will not be published to npm but will be pushed to
https://github.com/angular/dev-infra-private-builds repo for each
commit to master.
The contents of this npm package will then be depended on via
package.json dependency for angular/angular angular/angular-cli and
angular/components.
PR Close#35862
This version of `LockFile` creates an "unlocker" child-process that monitors
the main ngcc process and deletes the lock file if it exits unexpectedly.
This resolves the issue where the main process could not be killed by pressing
Ctrl-C at the terminal.
Fixes#35761
PR Close#35861
The previous implementation mixed up the management
of locking a piece of code (both sync and async) with the
management of writing and removing the lockFile that is
used as the flag for which process has locked the code.
This change splits these two concepts up. Apart from
avoiding the awkward base class it allows the `LockFile`
implementation to be replaced cleanly.
PR Close#35861
In pr #34978 colors were not properly set, if we type wrong url in the browser and we are directed to the 404 page there some text is set to white color which as not visible set it to dark gray for visibility
PR Close#35866
This reduces the time that `findEntryPoints` takes from 9701.143ms to 4177.278ms, by reducing the file operations done.
Reference: #35717
PR Close#35756
ng_update_migrations will still access the global yarn cache on its `ng update` call and there is no way to avoid this that I can see but if no other integration tests access the global yarn cache then that one test can have free reign over it.
PR Close#35877
This reverts commit 7d832ae1001b6264bb7124086089e9e69c10c9b6; breaks CI
with error `Concurrent upstream jobs persisted the same file(s) into the workspace:`
PR Close#35857
In some cases, we want to test the AIO app or docs examples against the
locally built Angular packages (for example to ensure that the changes
in a commit do not introduce a breaking change). In order to achieve
this, we have the `ng-packages-installer` script that handles updating
a project's `package.json` file to use the locally built Angular
packages (and appropriate versions for their (dev-/peer-)dependencies).
Previously, `ng-packages-installer` would only consider the locally
built Angular packages (from `dist/packages-dist/`). However, given that
Zone.js is now part of the `angular/angular` repo, it makes sense to
also use the locally built Zone.js package (from `dist/zone.js-dist/`).
Otherwise, the tests might fail for commits that update both the Angular
packages (and related docs examples) and the Zone.js package. An example
of such a simultaneous change (that would have broken tests) is #33838.
This commit updates the script to install the locally built Zone.js
package (in addition to the Angular ones). The commit ensures that the
Zone.js package will always be available alongside the Angular packages
(i.e. that the Zone.js package will be built by the same script that
builds the Angular packages and that the `dist/zone.js-dist/` directory
will be cached on CI).
Note: This problem was discovered while enabling docs examples unit
tests in #34374.
PR Close#35780
Previously, `NgPackagesInstaller` would only look for Angular local
packages and do so by listing all (deeply nested) files in
`dist/packages-dist/` and looking for `package.json` files nested two
levels deep (i.e. `dist/packages-dist/*/package.json`). Thus, it would
unnecessarily check a large number of files.
This commit changes the package detection logic to instead look for
a `package.json` file directly inside each subdirectory of
`dist/packages-dist/`, which speeds up the operation.
It also refactors the code to make it easier to look for packages in
other directories (besides `dist/packages-dist/`). This will be useful
in a subsequent commit to look for and use the locally built `zone.js`
package (from `dist/zone.js-dist/`).
PR Close#35780
This commit moves the build-related scripts
(`build-ivy-npm-packages.js`, `build-packages-dist.js` and
`package-builder.js`) to a dedicated directory to keep the `scripts/`
directory cleaner.
It also moves the logic for building the `zone.js` package to a separate
script, `zone-js-builder.js`, to make it re-usable. A subsequent commit
will use it to build the `zone.js` package when building the Ivy Angular
packages as well.
PR Close#35780
This reverts commit 00f3c58bb9.
Rolling back because it could be breaking e2e tests that assert that
there are no errors in the console after the assertions have run. We can
re-add this in v10.
PR Close#35845
Changes the Ivy unknown element/property messages from being logged with `console.warn` to `console.error`. This should make them a bit more visible without breaking existing apps. Furthermore, a lot of folks filter out warning messages in the dev tools' console, whereas errors are usually still shown.
Fixes#35699.
PR Close#35798
Using the --silent flag prevents the spammy logging messages in the
bazel execution logs.
```
INFO: From Bundling JavaScript packages/zone.js/dist/zone-rollup.umd.js [rollup]:
bazel-out/k8-fastbuild/bin/packages/zone.js/lib/browser/rollup-legacy-main.mjs → bazel-out/k8-fastbuild/bin/packages/zone.js/dist/zone-rollup.umd.js...
created bazel-out/k8-fastbuild/bin/packages/zone.js/dist/zone-rollup.umd.js in 736ms
```
PR Close#35835
It's an error to declare a variable twice on a specific template:
```html
<div *ngFor="let i of items; let i = index">
</div>
```
This commit introduces a template type-checking error which helps to detect
and diagnose this problem.
Fixes#35186
PR Close#35674
This is a follow up to #35637 which resolved a similar issue for `ComponentFactoryResolver`, but not the root cause. When a `NgModuleRef` is created, it instantiates an `Injector` internally which in turn resolves all of injector types. This can result in a circular call that results in an error, because the module is one of the injector types being resolved.
These changes work around the issue by allowing the constructor to run before resolving the injector types.
Fixes#35677.
Fixes#35639.
PR Close#35731
This patch is a follow-up patch to 35c9f0dc2f.
It changes the `computeStyle` function to handle situations where
non string based values are returned from `window.getComputedStyle`.
This situation usually ocurrs in Node-based test environments where
the element or `window.getComputedStyle` is mocked out.
PR Close#35810
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
Because the WORKSPACE file is generated JIT by schematics in this integration test, we need to patch the schematics to add the work-around.
PR Close#35808
The test libs should only be included in one jasmine_node_test
otherwise `bazel build //packages/language-service/...` would
end up running `feature_test` and `infra_test` twice.
PR Close#35816
`TestBed.get()` has been [deprecated in v9][1], in favor of
`TestBed.inject()`. In ##32382, the HTTP guide wording has been updated
to mention `TestBed.inject()` instead of `TestBed.get()`, but the
associated code snippets (extracted from the `http` example) were not.
This commit updates the HTTP guide examples to also use
`TestBed.inject()`.
[1]: https://v9.angular.io/guide/deprecations#testingFixes#35609
PR Close#35777
`ɵɵgetInheritedFactory()` is called from generated code for a component which extends another class. This function is detected by Closure to have a side effect and is not able to tree shake the component as a result. Marking it with `noSideEffects()` tells Closure it can remove this function under the relevant tree shaking conditions.
PR Close#35769
`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
This marks the function are "pure" and eligible to be tree shaken by Closure. Without this, initializing `ngDevMode` is considered a side effect which prevents this function from being tree shaken and also any component which calls it.
PR Close#35769
This is useful for propagating return values without them being converted to a string. It still provides the same guarantees to Closure, which will assume that the function invoked is pure and can be tree-shaken accordingly.
PR Close#35769
This commit performs a modularization of the Language Service's existing
diagnostic messages. Such a modularization has two primary advantages:
- Centralization and decoupling of error messages from the code that
generates them makes it easy to add/delete/edit diagnostic messages,
and allows for independent iteration of diagnostic messages and
diagnostic generation.
- Prepares for additional features like annotating the locations where a
diagnostic is generated and enabling the configuration of which
diagnostics should be reported by the language service.
Although it would be preferable to place the diagnostics registry in an
independent JSON file, for ease of typing diagnostic types as an enum
variant of 'ts.DiagnosticCategory', the registry is stored as an object.
Part of #32663.
PR Close#35678
In the `testing` guide, there is a section discussing configuring
`fakeAsync()` to handle more macro tasks (e.g.
`HTMLCanvasElement#toBlob()`).
Previously, the corresponding code snippets (some of which were
hard-coded in the guide) were incorrect/incomplete and the associated
tests were broken. This was discovered while enabling docs examples unit
tests in #34374.
This commit fixes the code snippets and associated tests and ensures the
examples used in the guide come from an example app (i.e. are not
hard-coded).
Note: The docs examples unit tests are currently not run on CI. This
will be fixed in #34374.
PR Close#35778
The flakiness in integration/bazel-schematics is going to be a bit tricker as the WORKSPACE file is JIT generated by the architect build layer
PR Close#35804
Since ivy is now default having `ivy` scope does not make sense. We are creating `ve` scope for cases where we are specifically fixing view-engine.
NOTE: Also sorted scopes alphabetically.
PR Close#35799
Before this change ngIvy implementation of queries would throw upon
encountering null / undefined query result collected from an embedded
view. It turns out that we might have a provider that explicitly provides
a null / undefined value in a place of a token queried for.
This commit removes a check from the ngIvy query implementation that was
asserting on a query result to be defined.
Fixes#35673
PR Close#35796
To understand the current sentence it requires to read it multiple times.
This fix should help developers to understand the sentence in a quicker way.
PR Close#35002
Before this change `[class]` and `[className]` were both converted into `ɵɵclassMap`. The implication of this is that at runtime we could not differentiate between the two and as a result we treated `@Input('class')` and `@Input('className)` as equivalent.
This change makes `[class]` and `[className]` distinct. The implication of this is that `[class]` becomes `ɵɵclassMap` instruction but `[className]` becomes `ɵɵproperty' instruction. This means that `[className]` will no longer participate in styling and will overwrite the DOM `class` value.
Fix#35577
PR Close#35668
Prior to this commit, i18n attributes defined on `<ng-template>` tags were not processed by the compiler. This commit adds the necessary logic to handle i18n attributes in the same way how these attrs are processed for regular elements.
PR Close#35681
Prior to this patch, the `margin` and `padding` properties were not
detected properly by Firefox due to them being shorthand properties.
This patch ensures that both `margin` and `padding` are converted
read as `top right bottom left` in the event that the shorthand
property detection fails for auto-styling in Angular animations.
Fix#35463 (FW-1886)
PR Close#35701
With this change we spawn workers lazily based on the amount of work that needs to be done.
Before this change we spawned the maximum of workers possible. However, in some cases there are less tasks than the max number of workers which resulted in created unnecessary workers
Reference: #35717
PR Close#35719
Previously, when running the unit tests for aio on Windows, many 404s
are logged for images, resulting in progress logs being spread over
multiple lines. This commit fixes this by adding a `proxy` to point
the fake image to a real image within the `src` folder.
Closes#29775
PR Close#35741
The `ng_package` rule currently creates incorrect UMD module exports
if an entry-point has a module name with numbers included.
For example, consider an entry-point called `@angular/cdk/a11y`. The UMD
module name should be `ng.cdk.a11y`. Instead, `ng_package` currently generates
an UMD module export called `ng.cdk.a11Y`.
This is because the logic for converting dash-case to camel case is
invalid as it uses Starlark's `title()` method. The title method
converts text to title case while we actually just want to capitalize
the first letter of a dash-case segment.
Fixes angular/components#18652.
PR Close#35792
Adds a new entry-point to the `@angular/bazel` `ng_package` test that
contains numbers in the name. e.g. `example/a11y`. This test is added
to replicate a bug where the UMD module export for such entry-points
is incorrectly generated. i.e. `example.a11Y` is generated instead of
`example.a11y`.
PR Close#35792
This commit updates the host bindings micro benchmark to run tests with mutliple directives (where each directive contains host bindings). The number of directives is configurable as a constant in the micro benchmark file. This change is needed to have an ability to measure/compare perf in different scenarios.
PR Close#35736
This commit extends the range of tNode types that may have local refs to include `TNodeType.Container` to account for `<ng-template>`s. Original changes in https://github.com/angular/angular/pull/33415 didn't include that type and as a result, an error is thrown at runtime in case an i18n block contains an `<ng-template>` with local refs.
PR Close#35758
When the `NgIf` directive is used in a template, its context variables
can be used to capture the bound value. This is typically used together
with a pipe or function call, where the resulting value is captured in a
context variable. There's two syntax forms available:
1. Binding to `NgIfContext.ngIf` using the `as` syntax:
```html
<span *ngIf="(user$ | async) as user">{{user.name}}</span>
```
2. Binding to `NgIfContext.$implicit` using the `let` syntax:
```html
<span *ngIf="user$ | async; let user">{{user.name}}</span>
```
Because of the semantics of `ngIf`, it is known that the captured
context variable is non-nullable, however the template type checker
would not consider them as such and still report errors when
`strictNullTypes` is enabled.
This commit updates `NgIf`'s context guard to make the types of the
context variables non-nullable, avoiding the issue.
Fixes#34572
PR Close#35125
This commit removes the `NullAstVisitor` and `visitAstChildren` exported
from `packages/compiler/src/expression_parser/ast.ts` because they
contain duplicate and buggy implementation, and their use cases could be
sufficiently covered by `RecursiveAstVisitor` if the latter implements the
`visit` method. This use case is only needed in the language service.
With this change, any visitor that extends `RecursiveAstVisitor` could
just define their own `visit` function and the parent class will behave
correctly.
A bit of historical context:
In language service, we need a way to tranverse the expression AST in a
selective manner based on where the user's cursor is. This means we need a
"filtering" function to decide which node to visit and which node to not
visit. Instead of refactoring `RecursiveAstVisitor` to support this,
`visitAstChildren` was created. `visitAstChildren` duplicates the
implementation of `RecursiveAstVisitor`, but introduced some bugs along
the way. For example, in `visitKeyedWrite`, it visits
```
obj -> key -> obj
```
instead of
```
obj -> key -> value
```
Moreover, because of the following line
```
visitor.visit && visitor.visit(ast, context) || ast.visit(visitor, context);
```
`visitAstChildren` visits every node *twice*.
PR Close#35619
This commit differentiates language service feature and language service
infrastructure tests. This is primarily to make testing of different
components at the development level easier. This commit continues a
small effort to expand our test coverage and normalize testing
structure.
Also adds test coverage to language service tests. We have quite a bit
to go on that front 🙂.
PR Close#35688
The changes to yarn.lock for the `$localize` typings
support are not filtering through because the cache
contains nested packages that are causing compilation
errors.
This change will force the cache to invalidate and allows
us to have a clean node_modules folder.
PR Close#35711
The `packages/localize/src/tools` folder was excluded
from the top level `tsconfig.json` which meant that in IDEs
these source files were not being given the correct configuration.
It was originally excluded because it required the native `node` typings
but this is no longer a requirement.
Removing this folder from the exclusion list exposed a new issue
where there was a typings mismatch between `@babel/...` sources
and the associated `@types/babel__...` typings packages.
A clean up of the package.json and yarn.lock appears to fix this.
PR Close#35711
For view and content queries, the Ivy compiler attempts to statically
evaluate the predicate token so that string predicates containing
comma-separated reference names can be split into an array of strings
during compilation. When the predicate is a dynamic value that cannot be
statically interpreted at compile time, the compiler would previously
produce an error. This behavior breaks a use-case where an `InjectionToken`
is being used as query predicate, as the usage of the `new` keyword
prevents such predicates from being statically evaluated.
This commit changes the behavior to no longer produce an error for
dynamic values. Instead, the expression is emitted as is into the
generated code, postponing the evaluation to happen at runtime.
Fixes#34267
Resolves FW-1828
PR Close#35307
Adds a new feature to ts-api-guardian allowing for automatically discovering all
entry point d.ts files from all package.json files in a provided directory.
PR Close#35691
Prior to this change, the logic that compiles Injectable in JIT mode used incorrect configuration that triggers a problem when `ChangeDetectorRef` is used as a dependency. This commit updates the logic to generate correct inject instruction to add the `ChangeDetectorRef` dependency in case it's requested in @Injectable class.
PR Close#35706
This commit adds micro benchmark for host bindings, so that we can assess the impact of changes related to host bindings (for example PR #35568).
PR Close#35705
Source-maps in the wild could be badly formatted,
causing the source-map flattening processing to fail
unexpectedly. Rather than causing the whole of ngcc
to crash, we gracefully fallback to just returning the
generated source-map instead.
PR Close#35718
Previously when rendering flattened source-maps, it was assumed that no
mapping would come from a line that is outside the lines of the actual
source content. It turns out this is not a valid assumption.
Now the code that renders flattened source-maps will handle such
mappings, with the additional benefit that the rendered source-map
will only contain mapping lines up to the last mapping, rather than a
mapping line for every content line.
Fixes#35709
PR Close#35718
If a package has a source-map but it does not provide
the actual content of the sources, then the source-map
flattening was crashing.
Now we ignore such mappings that have no source
since we are not able to compute the merged
mapping if there is no source file.
Fixes#35709
PR Close#35718
Added additional links which can help user find the things they are
looking for when there are no search results (when searching or on a 404
page).
Note:
This commit increases the main bundle's payload size due to the extra
content of the `aio-search-results` component.
Fixes#31532
PR Close#34978
In #35702, the payload size limit for Ivy builds was bumped to account
for small incremental increases in recent PRs. The ViewEngine size has
also increased similarly (~500B), but it was not updated in #35702,
because its total increase was just below the 500B error threshold (by
6B).
This commit bumps the ViewEngine size limit too.
Note: Any investigation for the Ivy size increase (as a follow-up
to #35702) will most likely also apply to ViewEngine, since the size was
increased by the same amount.
PR Close#34978
This commit adds a new ngcc configuration, `ignorableDeepImportMatchers`
for packages. This is a list of regular expressions matching deep imports
that can be safely ignored from that package. Deep imports that are not
ignored cause a warning to be logged.
// FW-1892
Fixes#35615
PR Close#35683
This commit adds a new preprocessor to use `${@searchKeywords}`, allowing
the docs to use a list of custom search phrases that will be
prioritized over the keywords found in the content.
Closes#35449
PR Close#35539
This commit updates AIO payload size limit that is triggering a problem after merging 0bc35a71e2. That commit added some payload size, but all checks were "green" for the original PR (#34574), so it looks like it's an accumulated payload size increase from multiple changes. The goal of this commit is to bring the master branch back to "green" state.
PR Close#35702
If an injectable has a `useClass`, Ivy injects the token in `useClass`, rather than the original injectable, if the injectable is re-provided under a different token. The correct behavior is that it should inject the re-provided token, no matter whether it has `useClass`.
Fixes#34110.
PR Close#34574
ɵAnimationDriver can be safely removed from private exports as AnimationDriver
is already a public export. Since its already available, we can safely remove
its declaration and migrate its only usage in our repo to rely on the public
AnimationDriver symbol.
PR Close#35690
Template type-checking within the Ivy compiler has been disabled internally
in g3 until compatibility with the whole codebase could be verified. As that
verification is now complete and template type-checking is known to be
compatible with g3, this commit enables it.
PR Close#35672
This commit normalizes hover and util tests in the language service.
This is part of a small effort to simplify and normalize the language
service testing structure, which currently contains specs that are
largely created and left without relation to other tests.
PR Close#35656
It's possible to pass a directive as an input to itself. Consider:
```html
<some-cmp #ref [value]="ref">
```
Since the template type-checker attempts to infer a type for `<some-cmp>`
using the values of its inputs, this creates a circular reference where the
type of the `value` input is used in its own inference:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: _t0});
```
Obviously, this doesn't work. To resolve this, the template type-checker
used to generate a `null!` expression when a reference would otherwise be
circular:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: null!});
```
This effectively asks TypeScript to infer a value for this context, and
works well to resolve this simple cycle. However, if the template
instead tries to use the circular value in a larger expression:
```html
<some-cmp #ref [value]="ref.prop">
```
The checker would generate:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: (null!).prop});
```
In this case, TypeScript can't figure out any way `null!` could have a
`prop` key, and so it infers `never` as the type. `(never).prop` is thus a
type error.
This commit implements a better fallback pattern for circular references to
directive types like this. Instead of generating a `null!` in place for the
reference, a type is inferred by calling the type constructor again with
`null!` as its input. This infers the widest possible type for the directive
which is then used to break the cycle:
```typescript
var _t0 = SomeCmp.ngTypeCtor(null!);
var _t1 = SomeCmp.ngTypeCtor({value: _t0.prop});
```
This has the desired effect of validating that `.prop` is legal for the
directive type (the type of `#ref`) while also avoiding a cycle.
Fixes#35372Fixes#35603Fixes#35522
PR Close#35622
NG6002/NG6003 are errors produced when an NgModule being compiled has an
imported or exported type which does not have the proper metadata (that is,
it doesn't appear to be an @NgModule, or @Directive, etc. depending on
context).
Previously this error message was a bit sparse. However, Github issues show
that this is the most common error users receive when for whatever reason
ngcc wasn't able to handle one of their libraries, or they just didn't run
it. So this commit changes the error message to offer a bit more useful
context, instructing users differently depending on whether the class in
question is from their own project, from NPM, or from a monorepo-style local
dependency.
PR Close#35620
When binding to `[style]` we correctly sanitized/unwrapped properties but we did not do it for the object itself.
```
@HostBinding("style")
style: SafeStyle = this.sanitizer.bypassSecurityTrustStyle(
"background: red; color: white; display: block;"
);
```
Above code would fail since the `[style]` would not unwrap the `SafeValue` and would treat it as object resulting in incorrect behavior.
Fix#35476 (FW-1875)
PR Close#35564
Whenever cookies are disabled in the browser, `window.localStorage` is
not avaialable to the app (i.e. even trying to access
`window.localStorage` throws an error).
To avoid breaking the app, we use a no-op `Storage` implementation if
`window.localStorage` is not available.
(This is similar to #33829, but for `localStorage` instead of
`sessionStorage`.)
Fixes#35555
PR Close#35557
On API docs pages for Angular packages (e.g. https://angular.io/api/common), we show all primary and secondary entry-points. Following a link to one of the secondary entry-points (e.g. https://angular.io/api/common/http), navigates the docs page for the secondary entry-point, where it is incorrectly (and misleadingly) labelled as PACKAGE and not as an entry-point.
Implemented a new ENTRY-POINT label and add support for correctly differentiating between entry-points and packages.
Fixes#34081
PR Close#35427
The library used by ngcc to update the source files (MagicString) is able
to generate a source-map but it is not able to account for any previous
source-map that the input text is already associated with.
There have been various attempts to fix this but none have been very
successful, since it is not a trivial problem to solve.
This commit contains a novel approach that is able to load up a tree of
source-files connected by source-maps and flatten them down into a single
source-map that maps directly from the final generated file to the original
sources referenced by the intermediate source-maps.
PR Close#35132
Currently we resolve the `NgModuleRef.componentFactoryResolver` by going through the injector, but the problem is that `ComponentFactoryResolver` has a dependency on `NgModuleRef`, which means that if the module that's attached to the ref tries to inject `ComponentFactoryResolver` in its constructor, we'll create a circular dependency which throws at runtime.
These changes resolve the issue by creating the `ComponentFactoryResolver` manually ahead of time without going through the injector. We can do this safely, because the only dependency for the resolver is the current module ref which is providing it.
Aside from fixing the issue, another advantage to this approach is that it should reduce the amount of generated JS, because it removes a getter and a provider definitio.
Fixes#35580.
PR Close#35637
Technically, function definitions can live anywhere because they are
hoisted. However, in this case Closure optimizations break when exported
function definitions are referred in another static object that is
exported.
The bad pattern is:
```
exports const obj = {f};
export function f() {...}
```
which turns to the following in Closure's module system:
```
goog.module('m');
exports.obj = {f};
function f() {...}
exports.f = f;
```
which badly optimizes to (note module objects are collapsed)
```
var b = a; var a = function() {...}; // now b is undefined.
```
This is an optimizer bug and should be fixed in Closure, but in the
meantime this change is a noop and will unblock other changes we want to
make.
PR Close#32230
For example, '<div><p string-model~{cursor}></p></div>', when provide the hover info for 'string-model', the 'path.head' is root tag 'div'. Use the parent of 'path.tail' instead.
PR Close#35317
Currently if TestBed detects that TestBed.overrideModule was used for module X, transitive scopes are recalculated recursively for all modules that X imports and previously calculated data (stored in cache) is ignored. This behavior was introduced in https://github.com/angular/angular/pull/33787 to fix stale transitive scopes issue (cache was not updated if module overrides are present).
The perf issue comes from a "diamond" problem, where module X is overridden which imports modules A and B, which both import module C. Under previous logic, module C gets its transitive deps recomputed multiple times, during the recompute for both A and B. For deep graphs and big common/shared modules this can be super costly.
This commit updates the logic to recalculate ransitive scopes for the overridden module, while keeping previously calculated scopes of other modules untouched.
PR Close#35454
Prior to this commit the service worker only treated 504 errors as "effectively offline".
This commit changes the behaviour to treat both 503 (Service Unavailable) and 504 as "offline".
Fixes#35571
PR Close#35595
The only test case for `ngFor` exercises an incorrect usage which causes
two bound attributes to be generated . This commit adds a canonical and
correct usage to show the difference between the two.
PR Close#35671
Now Angular doesn't support add event listeners as passive very easily.
User needs to use `elem.addEventListener('scroll', listener, {passive: true});`
or implements their own EventManagerPlugin to do that.
Angular may finally support new template syntax to support passive event, for now,
this commit introduces a temp solution to allow user to define the passive event names
in zone.js configurations.
User can define a global varibale like this.
```
(window as any)['__zone_symbol__PASSIVE_EVENTS'] = ['scroll'];
```
to let all `scroll` event listeners passive.
PR Close#34503
As a part of the process of setting up Router providers, we use `ApplicationRef` as a dependency while providing `Router` token. The thing is that `ApplicationRef` is actually unused (all referenced were removed in 5a849829c4 (diff-c0baae5e1df628e1a217e8dc38557fcb)), but it's still listed as dependency. This is causing problems in case `Router` is used as a dependency for factory functions provided as `APP_INITIALIZERS` multi-token (causing cyclic dependency). This commit removes unused `ApplicationRef` dependency in `Router`, so it can be used without causing cyclic dependency issue.
PR Close#35642
Previously if there were two path-mapped libraries that are in
different directories but the path of one started with same string
as the path of the other, we would incorrectly return the shorter
path - e.g. `dist/my-lib` and `dist/my-lib-second`. This was because
the list of `basePaths` was searched in ascending alphabetic order and
we were using `startsWith()` to match the path.
Now the `basePaths` are searched in reverse alphabetic order so the
longer path will be matched correctly.
// FW-1873
Fixes#35536
PR Close#35592
Previously, the example in the `router` guide was not
preserving the query params after logging in.
This commit fixes this by using `navigate` instead of
using `navigateByUrl`, which ignores any properties in
the `NavigationExtras` that would change the provided URL.
Fixes 34917
PR Close#35176
Move bazel-in-bazel them to test job & increase it is 2xlarge+. test_integration_bazel is removed. Overall CI credit usage is reduced.
test: include ng_elements_schematics in legacy integration tests temporarily
This test was recently added and use a new pattern that doesn't work with npm_integration_test out of the box. It needs some refactoring to work. Left a TODO for this
PR Close#33927
Now that large integration tests are running locally in parallel (they can't run on RBE yet as they require network access for yarn install), this test is running out of memory consistently with the xlarge machine
PR Close#33927
Install java runtime which is required by some integration tests such as `//integration:hello_world__closure_test`, `//integration:i18n_test` and `//integration:ng_elements_test` to run the closure compiler.
PR Close#33927
* it's tricky to get out of the runfiles tree with `bazel test` as `BUILD_WORKSPACE_DIRECTORY` is not set but I employed a trick to read the `DO_NOT_BUILD_HERE` file that is one level up from `execroot` and that contains the workspace directory. This is experimental and if `bazel test //:test.debug` fails than `bazel run` is still guaranteed to work as `BUILD_WORKSPACE_DIRECTORY` will be set in that context
* test //integration:bazel_test and //integration:bazel-schematics_test exclusively
* run "exclusive" and "manual" bazel-in-bazel integration tests in their own CI job as they take 8m+ to execute
```
//integration:bazel-schematics_test PASSED in 317.2s
//integration:bazel_test PASSED in 167.8s
```
* Skip all integration tests that are now handled by angular_integration_test except the tests that are tracked for payload size; these are:
- cli-hello-world*
- hello_world__closure
* add & pin @babel deps as newer versions of babel break //packages/localize/src/tools/test:test
@babel/core dep had to be pinned to 7.6.4 or else //packages/localize/src/tools/test:test failed. Also //packages/localize uses @babel/generator, @babel/template, @babel/traverse & @babel/types so these deps were added to package.json as they were not being hoisted anymore from @babel/core transitive.
NB: integration/hello_world__systemjs_umd test must run with systemjs 0.20.0
NB: systemjs must be at 0.18.10 for legacy saucelabs job to pass
NB: With Bazel 2.0, the glob for the files to test `"integration/bazel/**"` is empty if integation/bazel is in .bazelignore. This glob worked under these conditions with 1.1.0. I did not bother testing with 1.2.x as not having integration/bazel in .bazelignore is correct.
PR Close#33927
When a pipe inherits its constructor, and as a result its factory, from an injectable in AOT mode, it can end up throwing an error, because the inject implementation hasn't been set yet. These changes ensure that the implementation is set before the pipe's factory is invoked.
Note that this isn't a problem in JIT mode, because the factory inheritance works slightly differently, hence why this test isn't going through `TestBed`.
Fixes#35277.
PR Close#35468
Under View Engine's default (non-fullTemplateTypeCheck) checking, object and
array literals which appear in templates are treated as having type `any`.
This allows a number of patterns which would not otherwise compile, such as
indexing an object literal by a string:
```html
{{ {'a': 1, 'b': 2}[value] }}
```
(where `value` is `string`)
Ivy, meanwhile, has always inferred strong types for object literals, even
in its compatibility mode. This commit fixes the bug, and adds the
`strictLiteralTypes` flag to specifically control this inference. When the
flag is `false` (in compatibility mode), object and array literals receive
the `any` type.
PR Close#35462
In its default compatibility mode, the Ivy template type-checker attempts to
emulate the View Engine default mode as accurately as is possible. This
commit addresses a gap in this compatibility that stems from a View Engine
type-checking bug.
Consider two template expressions:
```html
{{ obj?.field }}
{{ fn()?.field }}
```
and suppose that the type of `obj` and `fn()` are the same - both return
either `null` or an object with a `field` property.
Under View Engine, these type-check differently. The `obj` case will catch
if the object type (when not null) does not have a `field` property, while
the `fn()` case will not. This is due to how View Engine represents safe
navigations:
```typescript
// for the 'obj' case
(obj == null ? null as any : obj.field)
// for the 'fn()' case
let tmp: any;
((tmp = fn()) == null ? null as any : tmp.field)
```
Because View Engine uses the same code generation backend as it does to
produce the runtime code for this expression, it uses a ternary for safe
navigation, with a temporary variable to avoid invoking 'fn()' twice. The
type of this temporary variable is 'any', however, which causes the
`tmp.field` check to be meaningless.
Previously, the Ivy template type-checker in compatibility mode assumed that
`fn()?.field` would always check for the presence of 'field' on the non-null
result of `fn()`. This commit emulates the View Engine bug in Ivy's
compatibility mode, so an 'any' type will be inferred under the same
conditions.
As part of this fix, a new format for safe navigation operations in template
type-checking code is introduced. This is based on the realization that
ternary based narrowing is unnecessary.
For the `fn()` case in strict mode, Ivy now generates:
```typescript
(null as any ? fn()!.field : undefined)
```
This effectively uses the ternary operator as a type "or" operation. The
resulting type will be a union of the type of `fn()!.field` with
`undefined`.
For the `fn()` case in compatibility mode, Ivy now emulates the bug with:
```typescript
(fn() as any).field
```
The cast expression includes the call to `fn()` and allows it to be checked
while still returning a type of `any` from the expression.
For the `obj` case in compatibility mode, Ivy now generates:
```typescript
(obj!.field as any)
```
This cast expression still returns `any` for its type, but will check for
the existence of `field` on the type of `obj!`.
PR Close#35462
I think the bug is introduced in my PR#34847. For example, 'model="{{title}}"', the attribute value cannot be parsed by 'parseTemplateBindings'.
PR Close#35494
In ES5 code, TypeScript requires certain helpers (such as
`__spreadArrays()`) to be able to support ES2015+ features. These
helpers can be either imported from `tslib` (by setting the
`importHelpers` TS compiler option to `true`) or emitted inline (by
setting the `importHelpers` and `noEmitHelpers` TS compiler options to
`false`, which is the default value for both).
Ngtsc's `StaticInterpreter` (which is also used during ngcc processing)
is able to statically evaluate some of these helpers (currently
`__assign()`, `__spread()` and `__spreadArrays()`), as long as
`ReflectionHost#getDefinitionOfFunction()` correctly detects the
declaration of the helper. For this to happen, the left-hand side of the
corresponding call expression (i.e. `__spread(...)` or
`tslib.__spread(...)`) must be evaluated as a function declaration for
`getDefinitionOfFunction()` to be called with.
In the case of imported helpers, the `tslib.__someHelper` expression was
resolved to a function declaration of the form
`export declare function __someHelper(...args: any[][]): any[];`, which
allows `getDefinitionOfFunction()` to correctly map it to a TS helper.
In contrast, in the case of emitted helpers (and regardless of the
module format: `CommonJS`, `ESNext`, `UMD`, etc.)), the `__someHelper`
identifier was resolved to a variable declaration of the form
`var __someHelper = (this && this.__someHelper) || function () { ... }`,
which upon further evaluation was categorized as a `DynamicValue`
(prohibiting further evaluation by the `getDefinitionOfFunction()`).
As a result of the above, emitted TypeScript helpers were not evaluated
in ES5 code.
---
This commit changes the detection of TS helpers to leverage the existing
`KnownFn` feature (previously only used for built-in functions).
`Esm5ReflectionHost` is changed to always return `KnownDeclaration`s for
TS helpers, both imported (`getExportsOfModule()`) as well as emitted
(`getDeclarationOfIdentifier()`).
Similar changes are made to `CommonJsReflectionHost` and
`UmdReflectionHost`.
The `KnownDeclaration`s are then mapped to `KnownFn`s in
`StaticInterpreter`, allowing it to statically evaluate call expressions
involving any kind of TS helpers.
Jira issue: https://angular-team.atlassian.net/browse/FW-1689
PR Close#35191
This is in preparation of using the `KnownFn` type for known TypeScript
helpers (in addition to built-in functions/methods). This will in turn
allow simplifying the detection of both imported and emitted TypeScript
helpers.
PR Close#35191
When statically evaluating CommonJS code it is possible to find that we
are looking for the declaration of an identifier that actually came from
a typings file (rather than a CommonJS file).
Previously, the CommonJS reflection host would always try to use a
CommonJS specific algorithm for finding identifier declarations, but
when the id is actually in a typings file this resulted in the returned
declaration being the containing file of the declaration rather than the
declaration itself.
Now the CommonJS reflection host will check to see if the file
containing the identifier is a typings file and use the appropriate
stategy.
(Note: This is the equivalent of #34356 but for CommonJS.)
PR Close#35191
In #33705 we made it so that we generate pure functions for object/array literals in order to avoid having them be shared across elements/views. The problem this introduced is that further down the line the `ContantPool` uses the generated literal in order to figure out whether to share an existing factory or to create a new one. `ConstantPool` determines whether to share a factory by creating a key from the AST node and using it to look it up in the factory cache, however the key generation function didn't handle function invocations and replaced them with `null`. This means that the key for `{foo: pureFunction0(...)}` and `{foo: null}` are the same.
These changes rework the logic so that instead of generating a `null` key
for function invocations, we generate a variable called `<unknown>` which
shouldn't be able to collide with anything.
Fixes#35298.
PR Close#35481
Currently Ivy always generates the `$event` function argument, even if it isn't being used by the listener expressions. This can lead to unnecessary bytes being generated, because optimizers won't remove unused arguments by default. These changes add some logic to avoid adding the argument when it isn't required.
PR Close#35097
The completions list don't include the 'ngTemplateOutlet'. The directive is a structural directive when it has injected the 'TemplateRef' or 'ViewContainerRef'.
PR Close#35466
In ES5 and ES2015, class identifiers may have aliases. Previously, the
`NgccReflectionHost`s recognized the following formats:
- ES5:
```js
var MyClass = (function () {
function InnerClass() {}
InnerClass_1 = InnerClass;
...
}());
```
- ES2015:
```js
let MyClass = MyClass_1 = class MyClass { ... };
```
In addition to the above, this commit adds support for recognizing an
alias outside the IIFE in ES5 classes (which was previously not
supported):
```js
var MyClass = MyClass_1 = (function () { ... }());
```
Jira issue: [FW-1869](https://angular-team.atlassian.net/browse/FW-1869)
Partially addresses #35399.
PR Close#35527
`Esm5ReflectionHost#getInnerFunctionDeclarationFromClassDeclaration()`
was already called with `ts.Declaration`, not `ts.Node`, so we can
tighten its parameter type and get rid of a redundant check.
`getIifeBody()` (called inside
`getInnerFunctionDeclarationFromClassDeclaration()`) will check whether
the given `ts.Declaration` is a `ts.VariableDeclaration`.
PR Close#35527
Prior to this commit, decorator handling logic in Ngtsc used `Error` to throw errors. This commit replaces most of these instances with `FatalDiagnosticError` class, which provider a better diagnostics error (including location of the problematic code).
PR Close#35244
Some minification tooling modifies `$localize` calls
to contain a comma sequence of items, where the
cooked and raw values are assigned to variables.
This change improves our ability to recognize these
structures.
Fixes#35376
PR Close#35562
The top-menu items have both a `title` and a `tooltip` property. The
`title` is used as text content, so there is little point in using it as
"tooltip" (via the HTMLElement's `title` property) too.
This commit switches to using the `tooltip` property to populate the
`title`. Note that in many cases, the `tooltip` property is derived from
`title` anyway (so there is no practical change in behavior in these
cases).
PR Close#33351
We have to do some extra work in the animations module when we identify a Node environment which we determine based on the `process` global. The problem is that by default Webpack will polyfill the `process`, causing us to incorrectly identify it. These changes make it so that the check isn't thrown off by Webpack.
Fixes#35117.
PR Close#35134
We recently updated chokidar to `3.0.0`. The latest version of
chokidar provides TypeScript types on its own and makes the extra
dependency on the `@types` unnecessary.
This seems to have caused the `build-packages-dist` script to fail with
an error like:
```
[strictDeps] transitive dependency on external/npm/node_modules/chokidar/types/index.d.ts
not allowed. Please add the BUILD target to your rule's deps.
```
It's unclear why that happens, but a reasonable theory would be that
the TS compilation accidentally picked up the types from `chokidar`
instead of `@types/chokidar`, and the strict deps `@bazel/typescript`
check reported this as issue because it's not an explicit target dependency.
PR Close#35371
This commit updates AIO payload size limit that is triggering a problem after merging f95b8ce07e. That commit added some payload size, but all checks were "green" for the PR (https://github.com/angular/angular/pull/34481) after rebase that happened a couple hours before the merge, so this is an accumulated payload size increase from multiple changes. The goal of this commit is to bring the master and patch branches back to "green" state.
PR Close#35538
ngcc uses a lockfile to prevent two ngcc instances from executing at the
same time. Previously, if a lockfile was found the current process would
error and exit.
Now, when in async mode, the current process is able to wait for the previous
process to release the lockfile before continuing itself.
PR Close#35131
In View Engine, host element of dynamically created component received attributes and classes extracted from component's selector. For example, if component selector is `[attr] .class`, the `attr` attribute and `.class` class will be add to host element. This commit adds similar logic to Ivy, to make sure this behavior is aligned with View Engine.
PR Close#34481
Before this change content queries with the `descendants: false` option, as implemented in ivy,
would not descendinto `<ng-container>` elements. This behaviour was different from the way the
View Engine worked. This change alligns ngIvy and VE behaviours when it comes to queries and the
`<ng-container>` elements and fixes a common bugs where a query target was placed inside the
`<ng-container>` element with a * directive on it.
Before:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node would NOT match -->
</ng-container>
</needs-target>
```
After:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node WILL match -->
</ng-container>
</needs-target>
```
Fixes#34768
PR Close#35384
When the same provider is resolved multiple times on the same node, the first invocation had the correct context, but all subsequent ones were incorrect because we were registering the hook multiple times under different indexes in `destroyHooks`.
Fixes#35167.
PR Close#35249
Previously, when switching angular versions through the
version selector in the sidenav, the query and hash is lost.
The user has to manually navigate to the original location again.
This commit fixes this issue and preserves the query and hash
when navigating between different versions.
Closes#24495
PR Close#35318
Currently the logic that handles ICUs located outside of i18n blocks may throw exceptions at runtime. The problem is caused by the fact that we store incorrect TNode index for previous TNode (index that includes HEADER_OFFSET) and do not store a flag whether this TNode is a parent or a sibling node. As a result, the logic that assembles the final output uses incorrect TNodes and in some cases throws exceptions (when incompatible structure is extracted from tView.data due to the incorrect index). This commit adjusts the index and captures whether TNode is a parent to make sure underlying logic manipulates correct TNode.
PR Close#35347
Light house was reporting that 'Ensure text remains visible during webfont load' solution to this problem was adding &swap to the end of web fonts this leads to our first text showing before web-font download and improves the performance of site link to article: https://web.dev/font-display/\?utm_source\=lighthouse\&utm_medium\=lr
PR Close#35352
Previously, we needed to manually specify a ChromeDriver version to
download on CI that would be compatible with the browser version
provided by the docker image used to run the tests. This was kept in the
`CI_CHROMEDRIVER_VERSION_ARG` environment variable.
With recent commits, we use the browser provided by `puppeteer` and can
determine the correct ChromeDriver version programmatically. Therefore,
we no longer need the `CI_CHROMEDRIVER_VERSION_ARG` environment
variable.
NOTE:
There is still one place (the `bazel-schematics` integration project)
where a hard-coded ChromeDriver version is necessary. Since I am not
sure what is the best way to refactor the tests to not rely on a
hard-coded version, I left it as a TODO for a follow-up PR.
PR Close#35381
In #35049, integration and AIO tests were changed to use the browser
provided by `puppeteer` in tests. This commit switches the docs examples
tests to use the same setup.
IMPLEMENTATION NOTE:
The examples are used to create ZIP archives that docs users can
download to experiment with. Since we want the downloaded projects to
resemble an `@angular/cli` generated project, we do not want to affect
the project's Protractor configuration in order to use `puppeteer`.
To achieve this, a second Protractor configuration is created (which is
ignored when creating the ZIP archives) that extends the original one
and passes the approperiate arguments to use the browser provided by
`puppeteer`. This new configuration (`protractor-puppeteer.conf.js`) is
used when running the docs examples tests (on CI or locally during
development).
PR Close#35381
This is a follow-up to #35049 with a few minor fixes related to using
the browser provided by `puppeteer` to run tests. Included fixes:
- Make the `webdriver-manager-update.js` really portable. (Previously,
it needed to be run from the directory that contained the
`node_modules/` directory. Now, it can be executed from a subdirectory
and will correctly resolve dependencies.)
- Use the `puppeteer`-based setup in AIO unit and e2e tests to ensure
that the downloaded ChromeDriver version matches the browser version
used in tests.
- Use the `puppeteer`-based setup in the `aio_monitoring_stable` CI job
(as happens with `aio_monitoring_next`).
- Use the [recommended way][1] of getting the browser port when using
`puppeteer` with `lighthouse` and avoid hard-coding the remote
debugging port (to be able to handle multiple instances running
concurrently).
[1]: https://github.com/GoogleChrome/lighthouse/blame/51df179a0/docs/puppeteer.md#L49
PR Close#35381
In https://github.com/angular/angular/pull/33058, we removed support
for the `ngForm` selector in the NgForm directive. We deleted most
of the deprecation notices in that PR, but we missed a paragraph
of documentation in the API docs for NgForm.
This commit removes the outdated paragraph that makes it seem like
the selector is still around and deprecated (as opposed to removed),
as it might confuse users.
PR Close#35435
Given:
```
<div class="s1" [class]="null" [ngClass]="exp">
```
Notice that `[class]` binding is not a `string`. As a result the existing logic would not concatenate `[class]` with `class="s1"`. The resulting falsy value would than be sent to `ngClass` which would promptly clear all styles on the `<div>`
The new logic correctly handles falsy values for `[class]` bindings.
Fix#35335
PR Close#35350
Root cause is that for perf reasons we cache `LFrame` so that we don't have to allocate it all the time. To be extra fast we clear the `LFrame` on `enterView()` rather that on `leaveView()`. The implication of this strategy is that the deepest `LFrame` will retain objects until the `LFrame` allocation depth matches the deepest object.
The fix is to simply clear the `LFrame` on `leaveView()` rather then on `enterView()`
Fix#35148
PR Close#35156
Includes new feature to honor .bazelignore in external repositories. rules_nodejs 1.3.0 now generates a .bazelignore for the @npm repository so that Bazel ignores the @npm//:node_modules folder.
PR Close#35430
Brings in feat: builtin: expose @npm//foo__all_files filegroup that includes all files in the npm package (https://github.com/bazelbuild/rules_nodejs/commit/8d77827) that is needed for npm_integration_test @npm//puppeteer pkg_tar on OSX (as the OSX Chrrome libs are extracted to paths that contain spaces)
PR Close#35430
- Fix minor typos in the Getting Started, Forms and AOT Compiler guide.
- Fix minor typo in the Tour of Heroes app.
- Fix coding styles in the Getting Started guide and the Tour of Heroes app
PR Close#35325
The update to Angular 9.0.0 appears to have lowered the main.js
file slightly, while the current master build of Angular appears
to have gone up slightly.
PR Close#35379
The previous range (^1.2.0) allowed the version 1.3.2 to be
installed which caused the ES2015 polyfills.js file to increase
in size unwantedly.
PR Close#35379
After the previous update to yarn.lock a problem surfaced
with the `mkdir-promise` package. The latest version of
dgeni-packages (0.28.3) fixes this problem.
PR Close#35379
This file had not been updated for some time and lots of
the dependencies have new versions.
This is actually necessary because (at least on OS/X) there
is a problem with `chokidar` and `fsevent` that is solved by
bumping the versions here.
PR Close#35379
Previously, the `deployment` section, was using the `firebase`
CLI to deploy the angular project into firebase. With the better
integration through the `fire` schematics, it is now easier to
deploy angular applications into firebase. This commit takes
care of this, by outlined the required steps for deployment.
Closes#35274
PR Close#35355
In the `loadRenderer` we make an assumption that the value will always be an `LView`, but if there's a directive on the same node which injects `ViewContainerRef` the `LView` will be wrapped in an `LContainer`. These changes add a call to unwrap the value before we try to read the value off of it.
Fixes#35342.
PR Close#35343
The message service was added in a section create message service but was impoted much before it removed those imports because they can be confusing
Fixes#35259
PR Close#35354
Previously, a section in the FAQ was not clear when discussing a
simple unit test. We also want to move away from question-based
sections. This commit clarified the confusing section and
changed all question-based sections.
Closes#35056
PR Close#35316
Verify that all files in the repo are covered by the pullapprove config
and that all rules in the pullapprove config match at least one file
in the repo.
PR Close#35060
Previously there was a regression in PullApprove which preventing draft mode
from being respected correctly for PullApprove processing. This regression
has been remedied and we should be able to once again respect draft mode for
PRs.
PR Close#35396
There is currently a bug in Chrome 80 that makes Array.reduce
not work according to spec. The functionality in forms that
retrieves controls from FormGroups and FormArrays (`form.get`)
relied on Array.reduce, so the Chrome bug broke forms for
many users.
This commit refactors our forms code to rely on Array.forEach
instead of Array.reduce to fix forms while we are waiting
for the Chrome fix to go live.
See https://bugs.chromium.org/p/chromium/issues/detail?id=1049982.
PR Close#35349
This means integration tests no longer need to depend on a $CI_CHROMEDRIVER_VERSION_ARG environment variable to specify which chromedriver version to download to match the locally installed chrome. This was bad DX and not having it specified was not reliable as webdriver-manager would not always download the chromedriver version to work with the locally installed chrome.
webdriver-manager update --gecko=false --standalone=false $CI_CHROMEDRIVER_VERSION_ARG is now replaced with node webdriver-manager-update.js in the root package.json, which checks which version of chrome puppeteer has come bundled with & downloads informs webdriver-manager to download the corresponding chrome driver version.
Integration tests now use "webdriver-manager": "file:../../node_modules/webdriver-manager" so they don't have to waste time calling webdriver-manager update in postinstall
"// resolutions": "Ensure a single version of webdriver-manager which comes from root node_modules that has already run webdriver-manager update",
"resolutions": {
"**/webdriver-manager": "file:../../node_modules/webdriver-manager"
}
This should speed up each integration postinstall by a few seconds.
Further, integration test package.json files link puppeteer via file:../../node_modules/puppeteer which is the ideal situation as the puppeteer post-install won't download chrome if it is already downloaded. In CI, since node_modules is cached it should not need to download Chrome either unless the node_modules cache is busted.
NB: each version of puppeteer comes bundles with a specific version of chrome. Root package.json & yarn.lock currently pull down puppeteer 2.1.0 which comes with chrome 80. See https://github.com/puppeteer/puppeteer#q-which-chromium-version-does-puppeteer-use for more info.
Only two references to CI_CHROMEDRIVER_VERSION_ARG left in integration tests at integration/bazel-schematics/test.sh which I'm not entirely sure how to get rid of it
Use a lightweight puppeteer=>chrome version mapping instead of launching chrome and calling browser.version()
Launching puppeteer headless chrome and calling browser.version() was a heavy-handed approach to determine the Chrome version. A small and easy to update mappings file is a better solution and it means that the `yarn install` step does not require chrome shared libs available on the system for its postinstall step
PR Close#35049
Under strict mode, the language service fails to typecheck nullable
symbols that have already been verified to be non-null.
This generates incorrect (false positive) and confusing diagnostics
for users.
To work around this issue in the short term, this commit changes the
diagnostic message from an error to a suggestion, and prompts users to
use the safe navigation operator (?) or non-null assertion operator (!).
For example, instead of
```typescript
{{ optional && optional.toString() }}
```
the following is cleaner:
```typescript
{{ optional?.toString() }}
{{ optional!.toString() }}
```
Note that with this change, users who legitimately make a typo in their
code will no longer see an error. I think this is acceptable, since
false positive is worse than false negative. However, if users follow
the suggestion, add ? or ! to their code, then the error will be surfaced.
This seems a reasonable trade-off.
References:
1. Safe navigation operator (?)
https://angular.io/guide/template-syntax#the-safe-navigation-operator----and-null-property-paths
2. Non-null assertion operator (!)
https://angular.io/guide/template-syntax#the-non-null-assertion-operator---
PR closes https://github.com/angular/angular/pull/35070
PR closes https://github.com/angular/vscode-ng-language-service/issues/589
PR Close#35200
Currently, would-be binding attributes that are missing binding names
are not parsed as bindings, and fall through as regular attributes. In
some cases, this can lead to a runtime error; trying to assign `#` as a
DOM attribute in an element like in `<div #></div>` fails because `#` is
not a valid attribute name.
Attributes composed of binding prefixes but not defining a binding
should be considered invalid, as this almost certainly indicates an
unintentional elision of a binding by the developer. This commit
introduces error reporting for attributes with a binding name prefix but
no actual binding name.
Closes https://github.com/angular/vscode-ng-language-service/issues/293.
PR Close#34595
Support for re-exports in UMD were added in e9fb5fdb8. This commit adds
some tests for re-exports (similar to the ones used for
`CommonJsReflectionHost`).
PR Close#35312
we should be documenting when an API is eligible for removal and not when it will be removed.
The actual removal depends on many factors, e.g. if we were able to automate the refactoring to
the recommended API in time or not.
PR Close#35263
We temporarily disabled the components-repo-unit-tests job as part of
a ngcc PR: #35079. This was necessary because the components repository
used postinstall patches for `@angular/compiler-cli/ngcc`. Due to
changes in ngcc, these patches no longer worked and caused the
`components-repo-unit-tests` job to fail.
The postinstall patch has been removed in the components repo, so the
job can be re-enabled.
PR Close#35123
Updates the commit the `components-repo-unit-tests` job runs against.
We need at least 2ec7254f88
which fixes a Ngcc postinstall patch conflict that required us to
temporarily disable the job in #35079.
PR Close#35123
Prior to this change, element namespace was not set for host elements of dynamically created components that resulted in incorrect rendering in a browser. This commit adds the logic to pick and set correct namespace for host element when component is created dynamically.
PR Close#35136
In Ivy's template type checker, event bindings are checked in a closure
to allow for accurate type inference of the `$event` parameter. Because
of the closure, any narrowing effects of template guards will no longer
be in effect when checking the event binding, as TypeScript assumes that
the guard outside of the closure may no longer be true once the closure
is invoked. For more information on TypeScript's Control Flow Analysis,
please refer to https://github.com/microsoft/TypeScript/issues/9998.
In Angular templates, it is known that an event binding can only be
executed when the view it occurs in is currently rendered, hence the
corresponding template guard is known to hold during the invocation of
an event handler closure. As such, it is desirable that any narrowing
effects from template guards are still in effect within the event
handler closure.
This commit tweaks the generated Type-Check Block (TCB) to repeat all
template guards within an event handler closure. This achieves the
narrowing effect of the guards even within the closure.
Fixes#35073
PR Close#35193
The `TargetedEntryPointFinder` must work out what the
containing package is for each entry-point that it finds.
The logic for doing this was flawed in the case that the
package was in a path-mapped directory and not in a
node_modules folder. This meant that secondary entry-points
were incorrectly setting their own path as the package
path, rather than the primary entry-point path.
Fixes#35188
PR Close#35227
In the past we had connecitivity issues on Saucelabs. Browsers on
mobile devices were not able to properly resolve the `localhost`
hostname through the tunnel. This is because the device resolves
`localhost` or `127.0.0.1` to the actual Saucelabs device, while it
should resolve to the tunnel host machine (in our case the CircleCI VM).
In the past, we simply disabled the failing devices and re-enabled the
devices later. At this point, the Saucelabs team claimed that the
connecitivy/proxy issues were fixed.
Saucelabs seems to have a process for VMs which ensures that requests to
`localhost` / `127.0.0.1` are properly resolved through the tunnel. This
process is not very reliable and can cause tests to fail. Related issues have been
observed/mentioned in the Saucelabs support docs. e.g.
https://support.saucelabs.com/hc/en-us/articles/115002212447-Unable-to-Reach-Application-on-localhost-for-Tests-Run-on-Safari-8-and-9-and-Edgehttps://support.saucelabs.com/hc/en-us/articles/225106887-Safari-and-Internet-Explorer-Won-t-Load-Website-When-Using-Sauce-Connect-on-Localhost
In order to ensure that requests are always resolved through the tunnel,
we add our own domain alias in the CircleCI's hosts file, and enforce that
it is always resolved through the tunnel (using the `--tunnel-domains` SC flag).
Saucelabs devices by default will never resolve this domain/hostname to the
actual local Saucelabs device.
PR Close#35171
Previously we needed the `components-repo-ci` blocklist to disable
tests that were failing during the development of Ivy. Since we fixed
all those failing tests, and we don't want to regress, we can remove the
blocklist logic.
Resolves FW-1807
PR Close#35115
Now that bazel respects the yarn-path value found in .yarnrc, we can
remove the last remaining reliances on our vendoring in
//third_party/github.com/yarnpkg/yarn/
PR Close#35083
This commit implements an experimental integration with tsc_wrapped, where
it can load the Angular compiler as a plugin and perform Angular
transpilation at a user's request.
This is an alternative to the current ngc_wrapped mechanism, which is a fork
of tsc_wrapped from several years ago. tsc_wrapped has improved
significantly since then, and this feature will allow Angular to benefit
from those improvements.
Currently the plugin API between tsc_wrapped and the Angular compiler is a
work in progress, so NgTscPlugin does not yet implement any interfaces from
@bazel/typescript (the home of tsc_wrapped). Instead, an interface is
defined locally to guide this standardization.
PR Close#34792
This commit moves the calculation of `ignoreFiles` - the set of files to be
ignored by a consumer of the `NgCompiler` API - from its `prepareEmit`
operation to its initialization. It's now available as a field on
`NgCompiler`.
This will allow a consumer to skip gathering diagnostics for `ignoreFiles`
as well as skip emit.
PR Close#34792
Removing for now, since the info is stale, and we need to determine how to adjust the schedule due to the unexpected and significant version 9 delay.
PR Close#34474
A bug previously caused the template type-checking diagnostics produced by
TypeScript for template expressions to use -99-prefixed error codes. These
codes are converted to "NG" errors instead of "TS" errors during diagnostic
printing. This commit fixes the issue.
PR Close#35146
On home page, image size set to 400px, which make the page not render
properly on devices below the size of 400px width.
Also, when search results were scrolled, they interfered with the top
nav items. Added border at the top of the search results container so
that the results are not visible under the nav items during scrolling.
PR Close#35098
Footer links did not have enough space between them, so lighthouse was
reporting that tap targets are not appropriately sized. Added the
required 8px space between links.
Also updated the margin of group headers accordingly.
Fixes#34901
PR Close#35098
Because the animation completes in 2000ms, and browser.wait checks
every 100ms, there can be a race condition of if the final state has
actually been reached to read the color. By moving to 2101ms, we ensure
that we cheack after the 2000ms of the animation has completed.
PR Close#35089
- Adds `TView` into `LFrame`, read the `TView` from `LView` on `enterView`.
- Before this change the `TView` was ofter looked up from `LView` as `lView[TVIEW]`. This is suboptimal since reading from an Array, requires that the read checks array size before the read. This means that such a read has a much higher cost than reading from the property directly. By passing in the `TView` explicitly it makes the code more explicit and faster.
- Some rearrangements of arguments so that `TView` would come before `LView` for consistency.
PR Close#35069
In #34021 the ngtsc compiler gained the ability to emit type parameter
constraints, which would generate imports for any type reference that
is used within the constraint. However, the `AbsoluteModuleStrategy`
reference emitter strategy did not consider interface declarations as a
valid declaration it can generate an import for, throwing an error
instead.
This commit fixes the issue by including interface declarations in the
logic that determines whether something is a declaration.
Fixes#34837
PR Close#34849
In #33551, a bug in `ngc --watch` mode was fixed so that a component is
recompiled when its template file is changed. Due to insufficient
normalization of files paths, this fix did not have the desired effect
on Windows.
Fixes#32869
PR Close#34015
Inside `*ngFor` the second run of the styling instructions can get into situation where it tries to read a value from a binding which has not yet executed. As a result the read is `NO_CHANGE` value and subsequent property read cause an exception as it is of wrong type.
Fix#35118
PR Close#35133
This commit cleans up `expression_type.ts` by
1. Removing the unnecessary `TypeDiagnostic` class. It's replaced by
`ng.Diagnostic`.
2. Consolidating `reportError()` and `reportWarning()` to
`reportDiagnostic()`.
This is prep work so that we could make some of the type diagnostics a
suggestion in later PRs.
PR Close#35085
`TNode.directives` was introduced in https://github.com/angular/angular/pull/34938. Turns out that it is unnecessary because the information is already present it `TData` when combining with `TNode.directiveStart` and `TNode.directiveEnd`
Mainly this is true (conceptually):
```
expect(tNode.directives).toEqual(
tData.slice(
tNode.directivesStart,
tNode.directivesEnd - tNode.DirectivesStart -1
)
);
```
The refactoring removes `TNode.directives` and adds `TNode.directiveStyling` as we still need to keep location in the directive in `TNode`
PR Close#35050
These tests are used for perf testing and don't run as part of CI, as a result they bit-rotted. This fixes that. Long term these tests should be run as part of CI.
PR Close#35071
To support parallel CLI builds we instruct developers to pre-process
their node_modules via ngcc at the command line.
Despite doing this ngcc was still trying to set a lock when it was being
triggered by the CLI for packages that are not going to be processed,
since they are not compiled by Angular for instance.
This commit checks whether a target package needs to be compiled
at all before attempting to set the lock.
Fixes#35000
PR Close#35057
If ngcc gets updated to a new version then the artifacts
left in packages that were processed by the previous
version are possibly invalid.
Previously we just errored if we found packages that
had already been processed by an outdated version.
Now we automatically clean the packages that have
outdated artifacts so that they can be reprocessed
correctly with the current ngcc version.
Fixes#35082
PR Close#35079
Now `hasBeenProcessed()` will no longer throw if there
is an entry-point that has been built with an outdated
version of ngcc.
Instead it just returns `false`, which will include it in this
processing run.
This is a precursor to adding functionality that will
automatically revert outdate build artifacts.
PR Close#35079
Fixes issue with yarn_install not following yarn-path in .yarnrc when bazel run from yarn with `yarn bazel ...` (rules_nodejs: fix: unset YARN_IGNORE_PATH in yarn_install before calling yarn #1588)
PR Close#34961
Fixes#18013
Previously it was hard to debug an `expectOne` if the request had no match, as the error message was:
Expected one matching request for criteria "Match URL: /some-url?query=hello", found none.
This commit adds a bit more info to the error, by listing the actual requests received:
Expected one matching request for criteria "Match URL: /some-url?query=hello", found none. Requests received are: POST /some-url?query=world.
PR Close#27005
https://angular.io/resources needs to be sturctured to be able to navigate to all resources with improved user experience. A lone scroll bar in this page will not help the reader a great deal in exploring the resources
Fixes#33526
PR Close#34756
Previous to this commit, HTTP params like `{ a: '1', b: [], c: '3' }` resulted in a request like `a=1&&c=3` (note the double &&).
The ideal fix would probably be to stringify these params to `a=1&b=&c=3` like we do for empty string values. But that might be breaking as some APIs may rely on the absence of the parameter.
This fixes the issue in a compatible way by just removing the extra and unnecessary `&`, resulting in `a=1&c=3`.
PR Close#34896
This reverts commit cb142b6df9.
The intention of this commit was for a consumer of the `compile` function to
pass the `bazelHost` it returns into future invocations, reusing the
`FileCache` between them. However, first-party ngc_wrapped does not do this,
which caused a performance regression as the `FileCache` was no longer
shared between compilations.
PR Close#35063
The golang section was recently added to the deployment guide
but has been reported as returning errors, where it had previously
worked. After discussion and testing with
Stephen Fluin, we are removing this section because of
inconsistency in functionality.
PR Close#34099
Update from chokidar 2.x to 3.x in ngc/ngtsc, to eliminate any possibility
of a security issue with a downstream dependency of the package.
FW-1809 #resolve
PR Close#35047
This change changes the priority order of static styling.
Current priority:
```
(least priority)
- Static
- Component
- Directives
- Template
- Dynamic Binding
- Component
- Map/Interpolation
- Property
- Directives
- Map/Interpolation
- Property
- Template
- Map/Interpolation
- Property
(highest priority)
```
The issue with the above priority is this use case:
```
<div style="color: red;" directive-which-sets-color-blue>
```
In the above case the directive will win and the resulting color will be `blue`. However a small change of adding interpolation to the example like so. (Style interpolation is coming in https://github.com/angular/angular/pull/34202)
```
<div style="color: red; width: {{exp}}px" directive-which-sets-color-blue>
```
Changes the priority from static binding to interpolated binding which means now the resulting color is `red`. It is very surprising that adding an unrelated interpolation and style can change the `color` which was not changed. To fix that we need to make sure that the static values are associated with priority of the source (directive or template) where they were declared. The new resulting priority is:
```
(least priority)
- Component
- Static
- Map/Interpolation
- Property
- Directives
- Static
- Map/Interpolation
- Property
- Template
- Static
- Map/Interpolation
- Property
(highest priority)
```
PR Close#34938
Since benchmarks are meant to test in a consistent environment, we
cannot execute the benchmark on RBE executors as executors do not
run in calibrated environments.
PR Close#34996
The current logic pulls multiproviders up to the parent module's
provider list. The result is that the multi provider being defined both in
the imported ModuleWithProviders and the parent and getting an extra
item in the multi provided array of values. This PR fixes that problem
by not pulling providers in ModuleWithProviders up to the parent module.
PR Close#34914
The language service reports an error when a directive's template
context is missing a member that is being used in a template (e.g. if
`$implicit` is being used with a template context typed as `any`).
While this diagnostic message is valuable, typing template contexts
loosely as `any` or `object` is very widespread in community packages,
and often still compiles correctly, so reporting the diagnostic as an
error may be misleading to users.
This commit changes the diagnostic to be a warning, and adds additional
information about how the user can eliminate the warning entirely -- by
refining the template context type.
Closes https://github.com/angular/vscode-ng-language-service/issues/572
PR Close#35036
Sometimes, a request for definitions will return multiple of the same
definition. This can happen in at least the cases of
- two-way bindings (one of the same definition for the property and
event binding)
- multiple template binding expressions in the same attribute
- something like "*ngFor="let i of items; trackBy: test" has two
template bindings, resulting in two template binding ASTs at the
same location (the attribute span). The language service then parses
both of these bindings individually, resulting in two independent
but identical definitions. For more context, see https://github.com/angular/angular/pull/34847#discussion_r371006680.
This commit prunes duplicate definitions by signing definitions with
their location, and checking if that location signature has been seen in
a previous definition returned to the client.
PR Close#34995
In #35004, we started ignoring yarn's engines check for `yarn install`
in AIO's `test-production.sh` script to fix a failure in the
`aio_monitoring_stable` CI job. (See #35004 for details.)
It turns out that the version of yarn used on the stable branch (1.17.3)
`--ignore-engines` is needed on all yarn commands (including `yarn
run`). Thus, #35004 is not enough to fix the failures.
New example failure: https://circleci.com/gh/angular/angular/604341
This commit turns of the engines check for the whole
`aio_monitoring_stable` CI job to fix the failure and make the job more
robust.
PR Close#35033
In #34974 the top level dependency on `@babel/core` was bumped to
7.8.3. This commit ensures that the package.json that gets included
in the `@angular/localize` distributable is at the same version.
PR Close#35008
Previously, when the benchmark tests ran outside of Bazel, developers
had the posibility to control how the tests run through command line
options. e.g. `--dryrun`. This no longer works reliable in Bazel where
command line arguments are not passed to the text executable.
To make the global options still usable (as they could be still useful
in some cases), we just pass them through the Bazel `--test_env`. This
reduces the code we need to read the command line, but still preserves
the flexibility in a Bazel idiomatic way.
PR Close#34753
Currently, based on the file names it's not quite clear whether
a given `.spec.ts` file runs benchmark perf or benchmark e2e
functionality tests. To disambiguate these, we use new file
suffixs. i.e. `e2e-spec.ts` and `perf-spec.ts`.
PR Close#34753
Currently we run all benchmark perf tests in CircleCI. Since we do not
collect any results, we unnecessarily waste CI/RBE resources. Instead,
we should just not run benchmark perf tests in CI, but still run the
functionality e2e tests which ensure that benchmarks are not broken.
We can do this by splitting the perf and e2e tests into separate
files/targets.
PR Close#34753
There are different `DebugNode`/`DebugElement` implementations (and
associated helper functions) for ViewEngine and Ivy. Additionally, these
classes/functions, which are defined inside the `core` package, are
imported by the `platform-browser` package.
Previously, this code was not tree-shaken as expected in Ivy. #30130
partially addressed the issue, but only for the case where `core` and
`platform-browser` end up in the same closure after webpack's scope
hoisting. In cases where this is not the case, our webpack/terser based
tooling is not capable of tree-shaking it.
This commit fixes the problem, by ensuring that the code retained in Ivy
mode (due to the cross-package import) does not unnecessarily reference
`DebugNode`/`DebugElement`, allowing the code to be tree-shaken away.
This results in a 7.6KB reduction in the size of the main angular.io
bundle.
Jira issue: [FW-1802](https://angular-team.atlassian.net/browse/FW-1802)
PR Close#35003
the commit causes lint on upstream/master to fail. We need to fix the script to not check too many past commits, but that
will have to wait until a follow up PR.
PR Close#35017
In #34955, we switched to Node.js v12 on master and 9.0.x. This causes
the `aio_monitoring_job` CI job (which checks out files from the stable
branch; currently 8.2.x) to start failing yarn's engines check (since
the 8.2.x branch expects Node.js version <11).
Example failure: https://circleci.com/gh/angular/angular/602499
Since the job is expected to run with files from both the stable and the
master branches (and since the version of Node.js is not important
here), this commit uses the `--ignore-engines` option to prevent
failures due to Node.js version mismatch.
NOTE:
Typically, the stable and master branch are on the same Node.js version,
because related PRs land on both master and the patch branch. One
exception is during RC periods, when the stable branch is different than
the patch branch. These periods are usually short, but in the case of
9.0.0 the period has lasted several months causing the CI environments
between master and the stable branch to get significantly out-of-sync.
PR Close#35004
* Added a /tools/saucelabs/sauce-service.sh script that manages the sauce-connect as a service which is used by the karma-saucelabs.js wrapper to start the service.
* Added /tools/saucelabs/README.md that covers the details of SauceLabs karma testing with Bazel.
PR Close#34769
earlier p sigly was used to define a paragraph element which was not clear what we want to refer changed it to paragrapg element for better understanding
Fixes#34922
PR Close#34927
This condition is being removed as it currently is failing to work as
expected with pullapprove at the moment. The plan/expectation is that
after a bit of troubleshooting, we will be able to add in the condition
once more. Removing the condition actually returns us to the same
state we were in with CODEOWNERS in which draft PRs are also assigned
reviews.
PR Close#35012
We are migrating to PullApprove for our PR review management in an attempt
to allow for more granular and equitable code review assignments across the
team. Currently this migration is equivalent in the review assignments
it will create. Once stable, our expectation is that we will be able to
take advantage of PullApproves additional features for things like staged
reviews.
PR Close#34814
The message now gives concrete advice to developers who
experience the error due to running multiple simultaneous builds
via webpack.
Fixes#35000
PR Close#35001
This commit adds support for completions of properties on `$event`
variables in bound outputs.
This is the second major PR to support completions for `$event`
variables (https://github.com/angular/vscode-ng-language-service/issues/531).
The final completion support that must be provided is for `$event`
variables in bindings targeting DOM events, like `(click)`.
PR Close#34570
This commit makes `findOutputBinding` a utility function for the
language service, which will be used by the `expression_diagnostics`
module in #34570. Keeping the function in `locate_symbol` results in a
circular dependency between `expression_diagnostics` and
`locate_symbol`.
PR Close#34997
We had some logic for generating and passing in the `elIndex` parameter into the `hostBindings` function, but it wasn't actually being used for anything. The only place left that had a reference to it was the `StylingBuilder` and it only stored it without referencing it again.
PR Close#34969
Component's decorator handler exposes `preanalyze` method to preload async resources (templates, stylesheets). The logic in preanalysis phase may throw `FatalDiagnosticError` errors that contain useful information regarding the origin of the problem. However these errors from preanalysis phase were not intercepted in TraitCompiler, resulting in just error message text be displayed. This commit updates the logic to handle FatalDiagnosticError and transform it before throwing, so that the result diagnostic errors contain the necessary info.
PR Close#34801
For the structural directive, the 'path' will contain multiple `BoundDirectivePropertyAst` which depends on the number of directive property in the attribute value(e.g. '*ngFor="let item of []; trackBy: test;"', it has 2 `BoundDirectivePropertyAst`, 'ngForOf' and 'ngForTrackBy').
PR Close#34847
This update increases the main bundle by ~0.6KB
payload size snapshot:
456581 Jan 24 22:07 dist/main-es2015.38c39f92eab2fcc8c835.js
541321 Jan 24 22:06 dist/main-es5.38c39f92eab2fcc8c835.js
52487 Jan 24 22:05 dist/polyfills-es2015.b374ef3555a700a97add.js
146193 Jan 24 22:05 dist/polyfills-es5.c7dc569e6c646e42fade.js
2987 Jan 24 22:05 dist/runtime-es2015.29be4028399ae41ba25e.js
2981 Jan 24 22:05 dist/runtime-es5.29be4028399ae41ba25e.js
PR Close#34966
the test failures most likely result from the babel updates in the previous commit.
it does look like we lost the file path from the error message, which is something that we
should follow up no in a separate change.
PR Close#34974
Previously we relied on this package being hoisted and available, which is error prone and it would
be just a matter of time before the build would break due rehoisting of deps upon future npm package.json
changes.
PR Close#34974
It's not clear how this ever worked (npm hoisting is a suspect though), but this dep is required because
one of the tests imports @babel/generator in the ts sources.
The lack of this dep is breaking builds on the master branch.
More discussion about this issue on Slack: https://angular-team.slack.com/archives/C07DT5M6V/p1579934766007500
PR Close#34974
As part of the effort to tighten the API surface of
`TypeScriptServiceHost` in preparation for the migration to Ivy, I realized
some recently added APIs are not strictly needed.
They can be safely removed without sacrificing functionality.
This allows us to clean up the code, especially in the implementation of
QuickInfo, where the `TypeScriptServiceHost` is leaked outside of the
`LanguageService` class.
This refactoring also cleans up some duplicate code where the QuickInfo
object is generated. The logic is now consolidated into a simple
`createQuickInfo` method shared across two different implementations.
PR Close#34941
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
This change introduces several functions for manipulating items in an array in an efficient (binary search) way.
- `arraySplice` a faster version of `Array.splice()`.
- `arrayInsert` a faster version of `Array.splice(index, 0, value)`.
- `arrayInsert2` a faster version of `Array.splice(index, 0, value1, value2)`.
- `arrayInsertSorted` a way to insert a value into sorted list.
- `arrayRemoveSorted` a way to remove a value from a sorted list.
- `arrayIndexOfSorted` a way to find a value in a sorted list.
- `ArrayMap` Efficient implementation of `Map` as an `Array`.
- `arrayMapSet`, `arrayMapGet`, `arrayMapIndexOf`, and `arrayMapDelete` for manipulating `ArrayMap`s.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
PR Close#34616
This change reverts https://github.com/angular/angular/pull/28711
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
The change removes the fact that `NgStyle`/`NgClass` is special and colaborates with the `[style]`/`[class]` to merge its styles. By reverting to old behavior we have better backwards compatiblity since it is no longer treated special and simply overwrites the styles (same as VE)
PR Close#34616
Compiler keeps track of number of slots (`vars`) which are needed for binding instructions. Normally each binding instructions allocates a single slot in the `LView` but styling instructions need to allocate two slots.
PR Close#34616
The `computeStaticStyling` will be used for computing static styling value during `firstCreatePass`.
The function takes into account static styling from the template as well as from the host bindings. The host bindings need to be merged in front of the template so that they have the correct priority.
PR Closes#34418
Parsing styling is now simplified to be used like so:
```
for (let i = parseStyle(text); i <= 0; i = parseStyleNext(text, i)) {
const key = getLastParsedKey();
const value = getLastParsedValue();
...
}
```
This change makes it easier to invoke the parser from other locations in the system without paying the cost of creating and iterating over `Map` of styles.
PR Closes#34418
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
This adds `insertTStyleValue` but does not hook it up to anything yet.
The purpose of this function is to create a linked-list of styling
related bindings. The bindings can be traversed during flush.
The linked list also keeps track of duplicates. This is important
for binding to know if it needs to check other styles for reconciliation.
PR Close#34004
This change introduces class/style reconciliation algorithm for DOM elements.
NOTE: The code is not yet hooked up, it will be used by future style algorithm.
Background:
Styling algorithm currently has [two paths](https://hackmd.io/@5zDGNGArSxiHhgvxRGrg-g/rycZk3N5S)
when computing how the style should be rendered.
1. A direct path which concatenates styling and uses `elemnent.className`/`element.style.cssText` and
2. A merge path which uses internal data structures and uses `element.classList.add/remove`/`element.style[property]`.
The situation is confusing and hard to follow/maintain. So a future PR will remove the merge-path and do everything with
direct-path. This however breaks when some other code adds class or style to the element without Angular's knowledge.
If this happens instead of switching from direct-path to merge-path algorithm, this change provides a different mental model
whereby we always do `direct-path` but the code which writes to the DOM detects the situation and reconciles the out of bound write.
The reconciliation process is as follows:
1. Detect that no one has modified `className`/`cssText` and if so just write directly (fast path).
2. If out of bounds write did occur, switch from writing using `className`/`cssText` to `element.classList.add/remove`/`element.style[property]`.
This does require that the write function computes the difference between the previous Angular expected state and current Angular state.
(This requires a parser. The advantage of having a parser is that we can support `style="width: {{exp}}px" kind of bindings.`)
Compute the diff and apply it in non destructive way using `element.classList.add/remove`/`element.style[property]`
Properties of approach:
- If no out of bounds style modification:
- Very fast code path: Just concatenate string in right order and write them to DOM.
- Class list order is preserved
- If out of bounds style modification detected:
- Penalty for parsing
- Switch to non destructive modification: `element.classList.add/remove`/`element.style[property]`
- Switch to alphabetical way of setting classes.
PR Close#34004
Fixes Ivy detecting changes inside child embedded views, even though they're detached.
Note that there's on subtlety here: I made the changes inside `refreshDynamicEmbeddedViews` rather than `refreshView`, because we support detecting changes on a detached view (evidenced by a couple of unit tests), but only if it's triggered directly from the view's `ChangeDetectorRef`, however we shouldn't be detecting changes in the detached child view when something happens in the parent.
Fixes#34816.
PR Close#34846
The `aio_monitoring_stable` CI job needs to check out (and execute
commands on) some files from the stable branch. Therefore, it needs to
use a version of `yarn` that is compatible with the `engines` version
specified in `aio/package.json`.
In #34902 (and subsequently #34952 for the 8.2.x branch), the way to
access our vendored version of yarn changed. This commit ensures that we
checkout the necessary files from the stable branch to use an
appropriate yarn version.
PR Close#34954
Previously, NgtscProgram lived in the main @angular/compiler-cli package
alongside the legacy View Engine compiler. As a result, the main package
depended on all of the ngtsc internal packages, and a significant portion of
ngtsc logic lived in NgtscProgram.
This commit refactors NgtscProgram and moves the main logic of compilation
into a new 'core' package. The new package defines a new API which enables
implementers of TypeScript compilers (compilers built using the TS API) to
support Angular transpilation as well. It involves a new NgCompiler type
which takes a ts.Program and performs Angular analysis and transformations,
as well as an NgCompilerHost which wraps an input ts.CompilerHost and adds
any extra Angular files.
Together, these two classes are used to implement a new NgtscProgram which
adapts the legacy api.Program interface used by the View Engine compiler
onto operations on the new types. The new NgtscProgram implementation is
significantly smaller and easier to reason about.
The new NgCompilerHost replaces the previous GeneratedShimsHostWrapper which
lived in the 'shims' package.
A new 'resource' package is added to support the HostResourceLoader which
previously lived in the outer compiler package.
As a result of the refactoring, the dependencies of the outer
@angular/compiler-cli package on ngtsc internal packages are significantly
trimmed.
This refactoring was driven by the desire to build a plugin interface to the
compiler so that tsc_wrapped (another consumer of the TS compiler APIs) can
perform Angular transpilation on user request.
PR Close#34887
Right now, if an Angular diagnostic is generated for a TypeScript node,
the span points to the decorator Identifier, i.e. the Identifier node
like `@NgModule`, `@Component`, etc.
This is weird. It should point to the class name instead.
Note, we do not have a more fine-grained breakdown of the span when
diagnostics are emitted, this work remains to be done.
PR Close#34932
In #34288, ngtsc was refactored to separate the result of the analysis
and resolve phase for more granular incremental rebuilds. In this model,
any errors in one phase transition the trait into an error state, which
prevents it from being ran through subsequent phases. The ngcc compiler
on the other hand did not adopt this strict error model, which would
cause incomplete metadata—due to errors in earlier phases—to be offered
for compilation that could result in a hard crash.
This commit updates ngcc to take advantage of ngtsc's `TraitCompiler`,
that internally manages all Ivy classes that are part of the
compilation. This effectively replaces ngcc's own `AnalyzedFile` and
`AnalyzedClass` types, together with all of the logic to drive the
`DecoratorHandler`s. All of this is now handled in the `TraitCompiler`,
benefiting from its explicit state transitions of `Trait`s so that the
ngcc crash is a thing of the past.
Fixes#34500
Resolves FW-1788
PR Close#34889
This syntax is invalid in these source files and does result in
compilation errors as the constructor parameters could not be resolved.
This hasn't been an issue until now as those errors were ignored in the
tests, but future work to introduce the Trait system of ngtsc into
ngcc will cause these errors to prevent compilation, resulting in broken
tests.
PR Close#34889
Previously, while trying to build an `NgccReflectionHost`'s
`privateDtsDeclarationMap`, `computePrivateDtsDeclarationMap()` would
try to collect exported declarations from all source files of the
program (i.e. without checking whether they were within the target
package, as happens for declarations in `.d.ts` files).
Most of the time, that would not be a problem, because external packages
would be represented as `.d.ts` files in the program. But when an
external package had no typings, the JS files would be used instead. As
a result, the `ReflectionHost` would try to (unnecessarilly) parse the
file in order to extract exported declarations, which in turn would be
harmless in most cases.
There are certain cases, though, where the `ReflectionHost` would throw
an error, because it cannot parse the external package's JS file. This
could happen, for example, in `UmdReflectionHost`, which expects the
file to contain exactly one statement. See #34544 for more details on a
real-world failure.
This commit fixes the issue by ensuring that
`computePrivateDtsDeclarationMap()` will only collect exported
declarations from files within the target package.
Jira issue: [FW-1794](https://angular-team.atlassian.net/browse/FW-1794)
Fixes#34544
PR Close#34811
The value changes emitted additionally when enable disable were called
documented the above behaviour in AbstractControl class documentaion
Fixes#34407
PR Close#34497
This commit fixes a bug in the incremental rebuild engine of ngtsc, where if
a component was removed from its NgModule, it would not be properly
re-emitted.
The bug stemmed from the fact that whether to emit a file was a decision
based purely on the updated dependency graph, which captures the dependency
structure of the rebuild program. This graph has no edge from the component
to its former module (as it was removed, of course), so the compiler
erroneously decides not to emit the component.
The bug here is that the compiler does know, from the previous dependency
graph, that the component file has logically changed, since its previous
dependency (the module file) has changed. This information was not carried
forward into the set of files which need to be emitted, because it was
assumed that the updated dependency graph was a more accurate source of that
information.
With this commit, the set of files which need emit is pre-populated with the
set of logically changed files, to cover edge cases like this.
Fixes#34813
PR Close#34912
We rename the `material-unit-tests` job to `components-repo-unit-tests`
because the job runs all unit tests found in the Angular Components repository.
This includes the Angular CDK, Angular Material and more. Also the repository has
been renamed from `angular/material2` to `angular/components` in the past.
PR Close#34898
It was previously defined in core without being exposed publicly, whereas `getLocaleCurrencyName` and `getLocaleCurrencySymbol` were defined in common, and publicly exposed.
This commit now privately exposes `ɵgetLocaleCurrencyCode` from core, and reexports it publicly from common.
PR Close#34810
This commit elaborates diagnostics produced for invalid template
contexts by including the name of the embedded template type using the
template context, and in the common case that the implicity property is
being referenced (e.g. in a `for .. of ..` expression), suggesting to
refine the type of the context. This suggestion is provided because
users will sometimes use a base class as the type of the context in the
embedded view, and a more specific context later on (e.g. in an
`ngOnChanges` method).
Closes https://github.com/angular/vscode-ng-language-service/issues/251
PR Close#34751
Rather than enforcing yarn versioning using `package.json`'s
engines value. We can utilize yarn's `yarn-path` value to
ensure that the version of yarn used at execution time is
consistent for everyone who uses our repo. This is the first
step in this wider vendoring process. We will use this same
vendoring mechanism for CI after
https://github.com/bazelbuild/rules_nodejs/pull/1569 lands
PR Close#34902
Creates a Bazel macro that can be used to test packages for
circular dependencies. We face one limitation with Bazel:
* Built packages use module imports, and not relative source file
paths. This means we need custom resolution.
Fortunately, tools like `madge` support custom resolution.
Also removes the outdated `check-cycles` gulp task that
didn't catch circular dependencies. It seems like the test
became broken when we switched the packages-dist output to Bazel. It
breaks because the Bazel output doesn't use relative paths, but uses
the module imports. This will be handled in the new Bazel macro/rule.
PR Close#34774
Previously, the template type-checker would always construct a generic
template context type with correct bounds, even when strictTemplates was
disabled. This meant that type-checking of expressions involving that type
was stricter than View Engine.
This commit introduces a 'strictContextGenerics' flag which behaves
similarly to other 'strictTemplates' flags, and switches the inference of
generic type parameters on the component context based on the value of this
flag.
PR Close#34649
FileToModuleHost aliasing supports compilation within environments that have
two properties:
1. A `FileToModuleHost` exists which defines canonical module names for any
given TS file.
2. Dependency restrictions exist which prevent the import of arbitrary files
even if such files are within the .d.ts transitive closure of a
compilation ("strictdeps").
In such an environment, generated imports can only go through import paths
which are already present in the user program. The aliasing system supports
the generation and consumption of such imports at runtime.
`FileToModuleHost` aliasing does not emit re-exports in .d.ts files. This
means that it's safe to rely on alias re-exports in generated .js code (they
are guaranteed to exist at runtime) but not in template type-checking code
(since TS will not be able to follow such imports). Therefore, non-aliased
imports should be used in template type-checking code.
This commit adds a `NoAliasing` flag to `ImportFlags` and sets it when
generating imports in template type-checking code. The testing environment
is also patched to support resolution of FileToModuleHost canonical paths
within the template type-checking program, enabling testing of this change.
PR Close#34649
Previously, `ReferenceEmitter.emit()` took an `ImportMode` enum value, where
one value of the enum allowed forcing new imports to be generated when
emitting a reference to some value or type.
This commit refactors `ImportMode` to be an `ImportFlags` value instead.
Using a bit field of flags will allow future customization of reference
emitting.
PR Close#34649
Previously, when generating template type-checking code, casts to 'any' were
produced as `expr as any`, regardless of the expression. However, for
certain expression types, this led to precedence issues with the cast. For
example, `a !== b` is a `ts.BinaryExpression`, and wrapping it directly in
the cast yields `a !== b as any`, which is semantically equivalent to
`a !== (b as any)`. This is obviously not what is intended.
Instead, this commit adds a list of expression types for which a "bare"
wrapping is permitted. For other expressions, parentheses are added to
ensure correct precedence: `(a !== b) as any`
PR Close#34649
Currently, the template type-checker gives an error if there are multiple
bindings to the same input. This commit aligns the behavior of the template
type-checker with the View Engine runtime: only the first binding to a field
has any effect. The rest are ignored.
PR Close#34649
It's possible to declare multiple inputs for a directive/component which all
map to the same property name. This is usually done in error, as only one of
any bindings to the property will "win".
In the template type-checker, an error was previously being raised as a
result of this ambiguity. Specifically, a type constructor was produced
which required a binding for each field, but only one of the fields had
a value via the binding. TypeScript would (rightfully) error on missing
values for the remaining fields. This ultimately was happening when the
code which generated the default values for "unset" inputs belonging to
directives or pipes used the final mapping from properties to fields as
a source for field names.
Instead, this commit uses the original list of fields to generate unset
input values, which correctly provides values for fields which shared a
property name but didn't receive the final binding.
PR Close#34649
Consider a library that uses a shared constant for host bindings. e.g.
```ts
export const BASE_BINDINGS= {
'[class.mat-themed]': '_isThemed',
}
----
@Directive({
host: {...BASE_BINDINGS, '(click)': '...'}
})
export class Dir1 {}
@Directive({
host: {...BASE_BINDINGS, '(click)': '...'}
})
export class Dir2 {}
```
Previously when these components were shipped as part of the
library to NPM, consumers were able to consume `Dir1` and `Dir2`.
No errors showed up.
Now with Ivy, when ngcc tries to process the library, an error
will be thrown. The error is stating that the host bindings should
be an object (which they obviously are). This happens because
TypeScript transforms the object spread to individual
`Object.assign` calls (for compatibility).
The partial evaluator used by the `@Directive` annotation handler
is unable to process this expression because there is no
integrated support for `Object.assign`. In View Engine, this was
not a problem because the `metadata.json` files from the library
were used to compute the host bindings.
Fixes#34659
PR Close#34661
Ngcc adds properties to the `package.json` files of the entry-points it
processes to mark them as processed for a format and point to the
created Ivy entry-points (in case of `--create-ivy-entry-points`). When
running ngcc in parallel mode (which is the default for the standalone
ngcc command), multiple formats can be processed simultaneously for the
same entry-point and the order of completion is not deterministic.
Previously, ngcc would append new properties at the end of the target
object in `package.json` as soon as the format processing was completed.
As a result, the order of properties in the resulting `package.json`
(when processing multiple formats for an entry-point in parallel) was
not deterministic. For tools that use file hashes for caching purposes
(such as Bazel), this lead to a high probability of cache misses.
This commit fixes the problem by ensuring that the position of
properties added to `package.json` files is deterministic and
independent of the order in which each format is processed.
Jira issue: [FW-1801](https://angular-team.atlassian.net/browse/FW-1801)
Fixes#34635
PR Close#34870
This commit adds a regression test to check that the language service
recognizes inputs and outputs declared in a directive decorator.
See #34874.
PR Close#34875
In Angular, symbol can have multiple definitions (e.g. a two-way
binding). This commit adds support for for multiple definitions for a
queried location in a template.
PR Close#34782
by DebugElement.triggerEventHandler. ZoneJS tracks the eventListeners on
a node but we need to be able to differentiate between those added by
Angular and those that were added outside the Angular context. This fix
aligns with the behavior that was present in View Engine (not calling
those listeners). If we decide later that we want to call those
listeners, we still need a way to differentiate between those that
we have wrapped in dom_renderer and those that were not (because they
were added outside the Angular context).
PR Close#34514
The Angular CLI will continue to call ngcc on all possible packages, even if they
have already been processed by ngcc in a postinstall script.
In a parallel build environment, this was causing ngcc to complain that it was
being run in more than one process at the same time.
This commit moves the check for whether the targeted package has been
processed outside the locked code section, since there is no issue with
multiple ngcc processes from doing this check.
PR Close#34722
Previously, it was possible for multiple instance of ngcc to be running
at the same time, but this is not supported and can cause confusing and
flakey errors at build time.
Now, only one instance of ngcc can run at a time. If a second instance
tries to execute it fails with an appropriate error message.
See https://github.com/angular/angular/issues/32431#issuecomment-571825781
PR Close#34722
This commit adds an `exclusive` parameter to the
`FileSystem.writeFile()` method. When this parameter is
true, the method will fail with an `EEXIST` error if the
file already exists on disk.
PR Close#34722
This commit increases payload size limits for angular.io application that triggered an error after merging another commit (00f13cc074). The goal of this commit is to bring master back to a "green" state and separate investigation is required to identify the root cause for size increase.
PR Close#34913
The StackBlitz API (which we use to generate StackBlitz projects on the
fly, when a user clicks on a live example link in the docs) allows
specifying the file to open in the editor by passing a query param. If
no file is specified, StackBlitz opens a default one. In the past, it
used to be `main.ts` and nowadays it seems to be `app.component.ts`.
StackBlitz builder, the tool that we use to generate the StackBlitz
projects, allows specifying the primary file by setting the `file`
property in the corresponding `stackblitz.json`.
Previously, if the `file` property was not set, StackBlitz builder would
not specify a file, thus falling back on StackBlitz's default behavior.
This was not great, because the default behavior may change unexpectedly
is the future to something that is less useful for our users.
This commit change StackBlitz builder to always specify a primary file.
If no file is specified in `stackblitz.json`, the builder will look
for the first file that exists in the example from a list of predefined
files.
Partially addresses #22357.
PR Close#34553
The StackBlitz API (which we use to generate StackBlitz projects on the
fly, when a user clicks on a live example link in the docs) allows
specifying the file to open in the editor by passing a query param. If
no file is specified, StackBlitz opens a default one.
This commit specifies relevant landing files for some of the examples to
make it easier to engage with the examples more quickly, and to see what
the example is attempting to demonstrate.
Fixes#22357.
PR Close#34553
Fixes Ivy throwing an error when trying to access the `DebugNode.classes` of an SVG element. The problem is that the `className` of an SVG element is an `SVGAnimatedString`, rather than a plain string.
Fixes#34868.
PR Close#34872
First we used a messages array to display messages toh-4 but it dsplayed only one message added additional messages on click of a hero
Fixes#28739
PR Close#34496
When running the e2e tests on CI, it is desirable that the build
progress is not logged, because that clutters the logs and makes it
difficult to get to the useful info in case of failures.
The previous config to achieve that doesn't work any more.
This commit update the `ci` configuration for e2e tests to suppress
build progress logging.
PR Close#34840
Since we always set up bazel on both our windows and linux CI
runs, we should consider this configuration part of the environment
setup.
PR Close#34834
Since we always execute our bazel commands using RBE on CI
we should not have separete tasks of configuring bazel
and setting up RBE for bazel. Enabling RBE for bazel should
be part of our bazel configuration process on CI.
PR Close#34834
This commit makes the Angular Language Service interface a strict subset
of TypeScript's Language Service by renaming all methods to be
consistent with TypeScript's.
The custom Angular `LanguageService` interface was needed before the
inception of TypeScript tsserver plugin, but is now obsolete since
Angular LS is a proper tsserver plugin.
This allows us to easily adapt to upstream TS changes in the future, and
also allows us to reuse all data types defined in TypeScript.
PR Close#34888
This patch removes the need for the styleSanitizer() instruction in
favor of passing the sanitizer into directly into the styleProp
instruction.
This patch also increases the binding index size for all style/class bindings in preparation for #34418
PR Close#34480
In a recent upgrade of rules_nodejs an update was made the
stamping logic in npm_package. Triggering stamping for npm_package
now require the --stamp flag.
PR Close#34890
Pipes in host binding expressions are not supported in View Engine and Ivy, but in some more complex cases (like `(value | pipe) === true`) compiler was not reporting errors. This commit extends Ivy logic to detect pipes in host binding expressions and throw in cases bindings are present. View Engine behavior remains the same.
PR Close#34655
Previously, the examples in the `comparing-observables` guide were hard-coded.
This made it impossible to test them and verify they are correct.
This commit fixes this by converting them into a proper mini-app. In a
subsequent commit, tests will be added to verify that the source code
works as expected (and guard against regressions).
Fixes#31024
PR Close#34327
Previously, we added patches to the `angular/components` repository in
the `material-unit-tests` job in order to be able to run their tests
with TypeScript 3.7. This is no longer needed since the components
repository updated to Ts 3.7 already. Hence we can remove the patches.
PR Close#34863
Updates the `material-unit-tests` job commit to the latest
available commit. We need to update since the `angular/components`
repository updated to TypeScript 3.7, which means that we can remove
the TS 3.7 workarounds we applied to get the job green when framework
updated to TS 3.7.
PR Close#34863
In #28162 we introduced an extra `removeNode` call for host elements which can cause the parent element to be removed before all child animations have finished. The issue is only in Ivy, because that the only place where we pass in the `isHostElement` flag. These changes fix the issue by not re-triggering the removal logic if the element has in-progress animations.
Fixes#33597.
PR Close#34702
Previously, the examples in the `cli-builder` guide were hard-coded.
This made it impossible to test them and verify they are correct.
This commit fixes this by converting them into a proper mini-app. In a
subsequent commit, tests will be added to verify that the source code
works as expected (and guard against regressions).
Fixes#34314
PR Close#34362
Currently we are showing the following link https://github.com/angular/angular/blob/master/docs/PUBLIC_API.md#golden-files whenever there are updates to the golden files. However this is not correct as this document only applies to the Angular repo as other consumers of ts-api-guardian have different commands, and they store they golden files in different locations.
PR Close#34786
earlier in the docs it was told that adding typescript's type checking make json response typed so changed docs to say that it adds all typescipt capabilities during compile time
Fixes#34746
PR Close#34845
Before ivy it was possible to configure a mutable service value
in an application initializer (by providing an `APP_INITIALIZER`)
that could be read in the provider of `LOCALE_ID`. This is a common
scenario if you wanted to load the locale id asynchronously from
an HTTP request for instance.
When using the ivy, the runtime needs to be told what the current
locale is, which is done by calling the `setLocaleId()` function with
the value injected by the `LOCALE_ID` token. Previously this was
being done before the application initializers were run, which meant
that the `LOCALE_ID` provider was being executed before the
app initializers had a chance to get a new value for it.
Now this initalization of the locale for the ivy runtime is done after the
application initializers have been run.
Closes#34701
PR Close#34830
Since I was learning the codebase and had a hard time understanding what was going on I've done a
bunch of changes in one commit that under normal circumstances should have been split into several
commits. Because this code is likely going to be overwritten with Misko's changes I'm not going to
spend the time with trying to split this up.
Overall I've done the following:
- I processed review feedback from #34307
- I did a bunch of renaming to make the code easier to understand
- I refactored some internal functions that were either inefficient or hard to read
- I also updated lots of type signatures to correct them and to remove many casts in the code
PR Close#34307
Prior to this change, in Ivy mode ngStyle/ngClass would accidentally emit value changes for static
(string-based) values even if the value itself had not changed. This patch ensures that
the style/class diffing code is more strict and when it signals ngClass/ngStyle that there has been
a value change.
Fixes#34336, #34444
PR Close#34307
remove unnecessary underscore suffix and the corresponding TODO comments,
because the rollup bug was fixed: github.com/rollup/rollup/issues/2047
PR Close#34757
Typescript 3.7 now emits d.ts files for getters differently than prior versions,
and there seems to be a bug in how it strips private types without replacing them
with explicit 'any' type. This then leads to compilation failures in projects compiled
against our packages that don't have skipLibCheck turned on but do have strict or
noImplicitAny check on.
I'm working around this by marking the affected getters as @internal and
adding a test to prevent future regressions.
I believe this is a TypeScript bug, and I filed a bug report:
https://github.com/microsoft/TypeScript/issues/36216
PR Close#34798
skipLibCheck=false is currently the default (in tsc 3.7.4) but it wouldn't be shocking if the default
changed in the future because skipLibCheck=true makes more sense in almost all scenarios. So just to be
defensive and explicit, I'm setting the flag to false even though it's the current default.
PR Close#34798
This release resolves the bootstrap require patching issue with jasmine_node_test. Require patches are now included before any bootstrap scripts.
PR Close#34736
Adds tests to verify that jasmine_node_test targets fail as expected.
This is to catch any future regressions to jasmine_node_test where tests pass silently without executing.
See https://github.com/bazelbuild/rules_nodejs/pull/1540 for an example of a potential regression.
PR Close#34736
This is recommended in the Bazel docs as $(location) is ambiguous and can mean either $(execpath) or $(rootpath) depending on the context.
PR Close#34736
This brings in a few minor fixes including a better way to patch require for bootstrap scripts
Also remove install_source_map_support attribute from nodejs_binary targets This attribute will be removed from nodejs_binary in the future
PR Close#34736
This brings in a required fix to allow for 0.0.0 dev version of @angular/core for integration testing. Without this the following error is now observed:
```
This version of CLI is only compatible with Angular versions ^9.0.0-beta || >=9.0.0 <10.0.0,
but Angular version 0.0.0 was found instead.
```
NB: rc.7 breaks the cli-hello-world-ivy-i18n integration test
PR Close#34736
For the purposes of the integration test the zone.js script & bundle script tags can just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets in integration/bazel.
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
When searching the typings program for a package for imports a
distinction is drawn between missing entry-points and deep imports.
Previously in the `DtsDependencyHost` these deep imports may be
marked as missing if there was no typings file at the deep import path.
Instead there may be a javascript file instead. In practice this means
the import is "deep" and not "missing".
Now the `DtsDependencyHost` will also consider `.js` files when checking
for deep-imports, and it will also look inside `@types/...` for a suitable
deep-imported typings file.
Fixes#34720
PR Close#34695
Updates the SHA that will be tested against in the `material-unit-tests` job to the latest commit in the components repository. SHA 71955d2e194bfc5561f25daea16e68af266d6ff9 is needed in order to compile repository with typescript 3.7
PR Close#33717
The components repository has a Yarn resolution to ensure that
dgeni-packages uses a specific TypeScript version. This resolution
causes the specified TS version to be considered as candidate for the
`@angular/bazel` peer dependency. Ultimately, Yarn decides to use
the TypeScript version from the resolution for `@angular/bazel`,
and builds will fail due to a version mismatch.
This is because `tsickle` will use the hoisted top-level TS
version (set to `3.7.4` ), while `@angular/bazel` uses the
version from the resolution (at the time of writing: v3.6.4)
PR Close#33717
Updates the commit SHA the `material-unit-tests` CircleCI
job runs against. We need to include a commit that makes
the node module installation more determinisitc (i.e. ensuring
that `tsickle` is always hoisted at the node module root).
31a50f7ad2
PR Close#33717
With TS 3.7, these examples were running into the error below (e.g. on https://circleci.com/gh/angular/angular/574906#tests/containers/0):
```
============== AIO example output for: /home/circleci/ng/aio/content/examples/observables/
running: yarn tsc --project ./
$ /home/circleci/ng/aio/content/examples/observables/node_modules/.bin/tsc --project ./
../../../tools/examples/shared/node_modules/protractor/built/index.d.ts(5,10): error TS2440: Import declaration conflicts with local declaration of 'PluginConfig'.
../../../tools/examples/shared/node_modules/protractor/built/index.d.ts(5,24): error TS2440: Import declaration conflicts with local declaration of 'ProtractorPlugin'.
error Command failed with exit code 2.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
completed: yarn tsc --project ./
```
This happened because of https://github.com/angular/protractor/issues/5348.
It's unclear why this typings problem does not affect `ng e2e` runs, and only affects `tsc` runs.
For now it seems sensible to alter the tests to compile only the app and not the e2e, since the intent of 2cc954d5a5 was never to verify the correctness of the e2e in the first place.
We still need a release of protractor that supports TS 3.7 though, but at least it doesn't seem to block our update proper.
PR Close#33717
Refactored Bazel host creation to export some of the relevant utility functions. google3 needs to make some modifications to the Bazel host to enable the Ivy migration. The functionality exported here is still needed in g3, but it allows g3 code to create the Bazel host, make necessary modifications, and then provide it to the external codebase here while everything is still compatible. For external users, this is a no-op.
PR Close#34686
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
Both `MinLengthValidator` and `MaxLengthValidator` accepted only string inputs for the length required, which throws with Ivy and `fullTemplateTypeCheck` enabled:
<!-- min = 2 in the component -->
<input [minlength]="min">
with:
Type 'number' is not assignable to type 'string | undefined'
This relaxes the accepted type to `string | number` to avoid breakage when developers switch to Ivy and fTTC.
PR Close#32057
The Template AST that corresponds to a given HTML AST is not always
complete, and often has to be reconstructed. This commit refactors the
code to make it easier to adapt to multiple cases.
PR Close#34764
Adds a `typeArguments` method to the `Symbol` interface, cleaning up how
type parameters of a TypeScript type are currently found. This will be
necessary for providing completions for `$event` variables' properties
(#34570).
This commit also performs some fly-by cleanups seen while implementing
the `typeArguments` methods. There is more clean up to do in the
`typescript_symbols` file, but the scope of this commit didn't need to
get larger.
PR Close#34571
Currently the language service constructs an `AttrAst` anytime it is
missing from a `TemplateAst` path. However, this should only be done
when the path does not contain an "attribute-like" AST, which can
includes bound properties or bound events.
This commit also refactors `visitAttr` to parse bindings only for
microsyntax expressions and does some other minor cleanup to make
linters happy.
This is some cleanup to help the language service eventually use
`BoundDirectivePropertyAst`s for providing completions for template
bindings rather than performing the manual parsing currently done.
PR Close#34743
DebugElement.query also matches elements that may have been created
outside of Angular (ex: with `document.appendChild`). If those matched
DebugElements are in turn used to query for more elements, an error
occurs because the first step in queryAll is to load the LContext.
PR Close#34687
The locale data extraction has been modified to include the default
currency code in the generated locale data. This commit updates these
generated files accordingly.
PR Close#32584
Default currency code in CurrencyPipe is currently hardcoded to USD
and is not configurable. This commit allows the default currency code
to be configurable by adding a DEFAULT_CURRENCY_CODE injection token.
Example:
```
providers: [{ provide: DEFAULT_CURRENCY_CODE, useValue: "GBP" }]
...
{{ 123.45 | currency }} // outputs £123.45 as opposed to always $123.45 before
```
Closes: #25461
PR Close#32584
Previously, `CommonJsDependencyHost.collectDependencies()` would only
find dependencies via imports of the form `var foo = require('...');` or
`var foo = require('...'), bar = require('...');` However, CommonJS
files can have imports in many different forms. By failing to recognize
other forms of imports, the associated dependencies were missed, which
in turn resulted in entry-points being compiled out-of-order and failing
due to that.
While we cannot easily capture all different types of imports, this
commit enhances `CommonJsDependencyHost` to recognize the following
common forms of imports:
- Imports in property assignments. E.g.:
`exports.foo = require('...');` or
`module.exports = {foo: require('...')};`
- Imports for side-effects only. E.g.:
`require('...');`
- Star re-exports (with both emitted and imported heleprs). E.g.:
`__export(require('...'));` or
`tslib_1.__exportStar(require('...'), exports);`
PR Close#34528
Unlike in View Engine, we currently reset the dirty state of
components in the check no changes change detection cycle.
This means that components cannot be marked as dirty from
view lifecycle hooks because the dirty state is reset and
the lifecycle hooks do not run in the check no changes CD cycle.
PR Close#34495
Runs the styling benchmarks that have been added with 2e0b237646863562e336f370372b4b7f9e52d818
in benchpress. The goal is that these benchmarks can be wired up in
Latency Lab.
PR Close#34664
This simplifies the Firebase redirect config, removing a redundant
pattern (`/api/http`) which is covered by the previous pattern and
dropping an unused named captured segment (`:rest*`).
This change does not affect the redirection behavior for the deployed
apps, but allows the Firebase hosting emulator to work correctly.
(See [here][1] for more info.)
NOTE: Although we are not currently using the Firebase emulator for
development/testing, we might want to use it in the future.
[1]: https://github.com/firebase/superstatic/issues/231#issuecomment-573034515
PR Close#34726
Currently the decorator handlers are run against all `SourceFile`s in the compilation, but we shouldn't be doing it against declaration files. This initially came up as a CI issue in #33264 where it was worked around only for the `DirectiveDecoratorHandler`. These changes move the logic into the `TraitCompiler` and `DecorationAnalyzer` so that it applies to all of the handlers.
PR Close#34557
This commit removes some test scenarios from `parsing-cases.ts` and
colocate them with the test code instead. This makes the tests easier to
read and understand.
PR Close#34716
This is recommended in the Bazel docs as $(location) is ambiguous and can mean either $(execpath) or $(rootpath) depending on the context.
PR Close#34589
Also add comment that cache_key version should be bumped when switching forks or branches and added a comment from @devversion explaining how the fallback cache key works.
PR Close#34589
This brings in a required fix to allow for 0.0.0 dev version of @angular/core for integration testing. Without this the following error is now observed:
```
This version of CLI is only compatible with Angular versions ^9.0.0-beta || >=9.0.0 <10.0.0,
but Angular version 0.0.0 was found instead.
```
NB: rc.7 breaks the cli-hello-world-ivy-i18n integration test
PR Close#34589
For the purposes of the integration test the zone.js script & bundle script tags can just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets in integration/bazel.
PR Close#34589
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
This commit renames `addAttributeValuesToCompletions`, which generates
expression completions and is not exclusive to processing attributes, to
`processExpressionCompletions`. Also removes the expression completion
logic in `visitBoundText` for a call to `processExpressionCompletions`.
The conditional branch in `visitBoundText` is also removed. This branch
was added in one of the first commits to the language service
(519a324454) and appears to be
unnecessary, as the expression AST is constructed from the template
position anyway.
PR Close#34518
Previously, the `CommonJsReflectionHost` and `UmdReflectionHost` would
only recognize re-exports of the form `__export(...)`. This is what
re-exports look like, when the TypeScript helpers are emitted inline
(i.e. when compiling with the default [TypeScript compiler options][1]
that include `noEmitHelpers: false` and `importHelpers: false`).
However, when compiling with `importHelpers: true` and [tslib][2] (which
is the recommended way for optimized bundles), the re-exports will look
like: `tslib_1.__exportStar(..., exports)`
These types of re-exports were previously not recognized by the
CommonJS/UMD `ReflectionHost`s and thus ignored.
This commit fixes this by ensuring both re-export formats are
recognized.
[1]: https://www.typescriptlang.org/docs/handbook/compiler-options.html
[2]: https://www.npmjs.com/package/tslib
PR Close#34527
A while ago we made a pass through all instructions to make sure that none of them call directly into other instructions, however it seems like missed the `pipeBind*` since they still call into the pure functions. The result is that we have some unnecessary duplicated accesses of global state like `getLView` which are called twice in a row with nothing changing.
These changes move the common functionality into a shared file and make the pipe instructions call into them with the global state instead.
PR Close#33714
The compiler's `I18NHtmlParser` may expand template nodes that have
internationalization metadata attached to them; for instance,
```html
<div i18n="@@i18n-el">{{}}</div>
```
gets expanded to an AST with the i18n metadata extracted and text filled
in as necessary; to the language service, the template above, as read in
the AST, now looks something like
```html
<div>{{$implicit}}</div>
```
This is undesirable for the language service because we want to preserve
the original form of the source template source code, and have
information about the original values of the template. The language
service also does not need to use an i18n parser -- we don't generate
any template output.
To fix this turns out to be as easy as moving to using a raw
`HtmlParser`.
---
A note on the testing strategy: as mentioned above, we don't need to use
an i18n parser, but we don't **not** need to use one if the parser
does not heavily modify the template AST. For this reason, the tests
target the functionality of not modifying a template with i18n metadata
rather than testing that the language service does not use an i18n parser.
---
Closes https://github.com/angular/vscode-ng-language-service/issues/272
PR Close#34531
Currently, the angular.io projects do not use Firebase's Realtime
Database and therefore we only need to configure and deploy changes for
`hosting`.
This commit removes the unused Realtime Database related configs and
files.
PR Close#34696
With 5cecd97493 we intended to expand
the input type of the `disabled` input of the `NgModel` directive.
Read more about the reason for this in the actual commit message.
Currently though, the acceptance coercion member does not have any
effect. This is because the acceptance member needs to refer to the
actual input property name, and not to the public input name.
`disabled` corresponds to the `isDisabled` property.
PR Close#34502
This commit improves `ExpressionChangedAfterChecked` error message for attributes by including attribute name and the content of the entire expression that contains interpolation(s). In order to achieve that, metadata is now stored in `TData` array when `attribute` and `attributeInterpolate` instructions are being called (similar to `property` and `propertyInterpolate` instructions).
PR Close#34505
Currently Bazel always terminates the Saucelabs Bazel tests
after 5mins. This is causing failing tests as Saucelabs tests
usually run longer than 5mins. Our current Saucelabs idle timeout
is 10min, so we should ensure that we don't exit early without
properly shutting down Karma / disconnecting the browsers.
PR Close#34707
If a class was defined as a class expression
in a variable declaration, the definitions
were being inserted before the statment's
final semi-colon.
Now the insertion point will be after the
full statement.
Fixes#34648
PR Close#34677
This was already the default. I'm working on a change in the underlying TS rules where this parameter will be replaced, so ng_module needs to change first
PR Close#34665
In some cases, where a module imports a dependency
but does not actually use it, UMD bundlers may remove
the dependency parameter from the UMD factory function
definition.
For example:
```
import * as x from 'x';
import * as z from 'z';
export const y = x;
```
may result in a UMD bundle including:
```
(function (global, factory) {
typeof exports === 'object' && typeof module !== 'undefined' ?
factory(exports, require('x'), require('z')) :
typeof define === 'function' && define.amd ?
define(['exports', 'x', 'z'], factory) :
(global = global || self, factory(global.myBundle = {}, global.x));
}(this, (function (exports, x) { 'use strict';
...
})));
```
Note that while the `z` dependency is provide in the call,
the factory itself only accepts `exports` and `x` as parameters.
Previously ngcc appended new dependencies to the end of the factory
function, but this breaks in the above scenario. Now the new
dependencies are prefixed at the front of parameters/arguments
already in place.
Fixes#34653
PR Close#34660
In some cases TypeScript is unable to identify a valid
symbol for an export. In this case it returns an "unknown"
symbol, which does not reference any declarations.
This fix ensures that ngcc does not crash if such a symbol
is encountered by checking whether `symbol.declarations`
exists before accessing it.
The commit does not contain a unit test as it was not possible
to recreate a scenario that had such an "unknown" symbol in
the unit test environment. The fix has been manually checked
against that original issue; and also this check is equivalent to
similar checks elsewhere in the code, e.g.
https://github.com/angular/angular/blob/8d0de89e/packages/compiler-cli/src/ngtsc/reflection/src/typescript.ts#L309Fixes#34560
PR Close#34658
There was some confusion about how the service will be injected in the sentence with the `new` keyword. This PR should hopefully clear the confusion.
Fixes#34612
PR Close#34638
Fixes classes with trailing or leading space that are passed to `ngClass` (e.g. `{'foo ': bar}`) not being applied in Ivy. The issue comes from the fact that when the styling differ builds up the style map it uses the trimmed key to look up the value in the map that uses non-trimmed keys.
Fixes#34476.
PR Close#34539
Follow-up from [this discussion](https://github.com/angular/angular/pull/33419#discussion_r339296216). In Ivy we don't use the schema to validate tag names, but instead we use feature detection to figure out whether an element is supported. While this should generally be more accurate, it'll also end up throwing for some more innocent cases. E.g. now Ivy throws an error for `main` elements in IE which is accurate since IE doesn't support the element, but is annoying since there is no functionality attached.
These changes switch to logging a warning instead, similarly to what we're doing for unknown properties.
PR Close#34524
Previously, in cases were values were expensive to compute and would be
used multiple times, a combination of a regular `Map` and a helper
function (`getOrDefault()`) was used to ensure values were only computed
once.
This commit uses a special `Map`-like structure to compute and memoize
such expensive values without the need to a helper function.
PR Close#34512
This change should not have any impact on the code's behavior (based on
how the function is currently used), but it will avoid unnecessary work.
PR Close#34512
While different, CommonJS and UMD have a lot in common regarding the
their exports are constructed. Therefore, there was some code
duplication between `CommonJsReflectionHost` and `UmdReflectionHost`.
This commit extracts some of the common bits into a separate file as
helpers to allow reusing the code in both `ReflectionHost`s.
PR Close#34512
Previously, `UmdReflectionHost` would only recognize re-exports of the
form `__export(someIdentifier)` and not `__export(require('...'))`.
However, it is possible in some UMD variations to have the latter format
as well. See discussion in https://github.com/angular/angular/pull/34254/files#r359515373
This commit adds support for re-export of the form
`__export(require('...'))` in UMD.
PR Close#34512
This fix was part of a broader `ngtsc`/`ngcc` fix in 02bab8cf9 (see
there for details). In 02bab8cf9, the fix was only applied to
`CommonJsReflectionHost`, but it is equally applicable to
`UmdReflectionHost`. Later in #34254, the fix was partially ported to
`UmdReflectionHost` by fixing the `extractUmdReexports()` method.
This commit fully fixes `ngcc`'s handling of inline exports for code in
UMD format.
PR Close#34512
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Previously, some of the examples in the `lazy-loading-ngmodules` guide
were hard-coded.
This commit ensures all examples in the guide are extracted from
docregions in the corresponding example project.
PR Close#34599
Previously, if `UmdRenderingFormatter#addImports()` was called with an
empty list of imports to add (i.e. no new imports were needed), it would
add trailing commas in several locations (arrays, function arguments,
function parameters), thus making the code imcompatible with legacy
browsers such as IE11.
This commit fixes it by ensuring that no trailing commas are added if
`addImports()` is called with an empty list of imports.
This is a follow-up to #34353.
Fixes#34525
PR Close#34545
ngcc computes a dependency graph of entry-points to ensure that
entry-points are processed in the correct order. Previously only the imports
in source files were analysed to determine the dependencies for each
entry-point.
This is not sufficient when an entry-point has a "type-only" dependency
- for example only importing an interface from another entry-point.
In this case the "type-only" import does not appear in the
source code. It only appears in the typings files. This can cause a
dependency to be missed on the entry-point.
This commit fixes this by additionally processing the imports in the
typings program, as well as the source program.
Note that these missing dependencies could cause unexpected flakes when
running ngcc in async mode on multiple processes due to the way that
ngcc caches files when they are first read from disk.
Fixes#34411
// FW-1781
PR Close#34494
The `DependencyHost` implementations were duplicating the "postfix" strings
which are used to find matching paths when resolving module specifiers.
Now the hosts reuse the postfixes given to the `ModuleResolver` that is
passed to the host.
PR Close#34494
Rather than return a new object of dependency info from calls to
`collectDependencies()` we now pass in an object that will be updated
with the dependency info. This is in preparation of a change where
we will collect dependency information from more than one
`DependencyHost`.
Also to better fit with this approach the name is changed from
`findDependencies()` to `collectDependencies()`.
PR Close#34494
The main change here was to remove the updating instructions for
version 9 and instead point to update.angular.io. This ensures
we only have one "source of truth" for update instructions.
This commit also includes updates to error message text to
keep them up-to-date with live error messages (and thus keep
them searchable).
PR Close#34498
Prior to this commit, there were no `advance` instructions generated before `i18nExp` instructions and as a result, lifecycle hooks for components used inside i18n blocks were flushed too late. This commit adds the logic to generate `advance` instructions in front of `i18nExp` ones (similar to what we have in other places like interpolations, property bindings, etc), so that the necessary lifecycle hooks are flushed before expression value is captured.
PR Close#34436
The main logic of the `InheritDefinitionFeature` is to go through the prototype chain of a given Component and merge all Angular-specific information onto that Component def. The problem happens in case there is a Component in a hierarchy that also contains the `InheritDefinitionFeature` (i.e. it extends some other Component), so it inherits all Angular-specific information from its super class. As a result, the root Component may end up having duplicate information inherited from different Components in hierarchy.
Let's consider the following structure: `GrandChild` extends `Child` that extends `Base` and the `Base` class has a `HostListener`. In this scenario `GrandChild` and `Child` will have `InheritDefinitionFeature` included into the `features` list. The processing will happend in the following order:
- `Child` inherits `HostListener` from the `Base` class
- `GrandChild` inherits `HostListener` from the `Child` class
- since `Child` has a parent, `GrandChild` also inherits from the `Base` class
The result is that the `GrandChild` def has duplicated host listener, which is not correct.
This commit introduces additional logic that checks whether we came across a def that has `InheritDefinitionFeature` feature (which means that this def already inherited information from its super classes). If that's the case, we skip further fields-related inheritance logic, but keep going though the prototype chain to look for super classes that contain other features (like NgOnChanges), that we need to invoke for a given Component def.
PR Close#34244
Fixes an error that is thrown when a provider is overridden in `TestBed`, if the module definition of one of the imported modules uses a function for the `imports` that is set via `setNgModuleScope`. The problem was that we have a `for...of` loop that assumes that the imports are an array, but they can also be a function. This was handled correctly in other places, but this one was missed.
Note that the above-mentioned error is only thrown at runtime when the code is transpiled to es6. In es5 TS generates a call to a helper that handles the error silently so the attached unit test only fails in es6.
Fixes#34623.
PR Close#34629
Currently, the language service provides completions in a template node
attribute by first checking if the attribute contains template bindings
to provide completions for, and then providing completions for the
expression in the attribute.
In the latter case, the expression AST was being constructed
"synthetically" inside the language service, in particular declaring the
expression to be a `PropertyRead` with an implicit receiver.
Unfortunately, this AST can be incorrect if the expression is actually a
property read on a component property receiver (e.g. when reading
`key` in the expression `obj.key`, `obj` is the receiver).
The fix is pretty simple - rather than a synthetic construction of the
AST, ask the expression parser to parse the expression in the attribute.
Fixes https://github.com/angular/vscode-ng-language-service/issues/523
PR Close#34517
Previously, it was required that both `fullTemplateTypeCheck` and
`strictTemplates` had to be enabled for strict mode to be enabled. This
is strange, as `strictTemplates` implies `fullTemplateTypeCheck`. This
commit makes setting the `fullTemplateTypeCheck` flag optional so that
strict mode can be enabled by just setting `strictTemplates`.
PR Close#34195
It is now an error if '"fullTemplateTypeCheck"' is disabled while
`"strictTemplates"` is enabled, as enabling the latter implies that the
former is also enabled.
PR Close#34195
The compiler has a translation mechanism to convert from an Angular
`Type` to a `ts.TypeNode`, as appropriate. Prior to this change, it
would translate certain Angular expressions into their value equivalent
in TypeScript, instead of the correct type equivalent. This was possible
as the `ExpressionVisitor` interface is not strictly typed, with `any`s
being used for return values.
For example, a literal object was translated into a
`ts.ObjectLiteralExpression`, containing `ts.PropertyAssignment` nodes
as its entries. This has worked without issues as their printed
representation is identical, however it was incorrect from a semantic
point of view. Instead, a `ts.TypeLiteralNode` is created with
`ts.PropertySignature` as its members, which corresponds with the type
declaration of an object literal.
PR Close#34021
In Ivy's template type checker, type constructors are created for all
directive types to allow for accurate type inference to work. The type
checker has two strategies for dealing with such type constructors:
1. They can be emitted local to the type check block/type check file.
2. They can be emitted as static `ngTypeCtor` field into the directive
itself.
The first strategy is preferred, as it avoids having to update the
directive type which would cause a more expensive rebuild. However, this
strategy is not suitable for directives that have constrained generic
types, as those constraints would need to be present on the local type
constructor declaration. This is not trivial, as it requires that any
type references within a type parameter's constraint are imported into
the local context of the type check block.
For example, lets consider the `NgForOf` directive from '@angular/core'
looks as follows:
```typescript
import {NgIterable} from '@angular/core';
export class NgForOf<T, U extends NgIterable<T>> {}
```
The type constructor will then have the signature:
`(o: Pick<i1.NgForOf<T, U>, 'ngForOf'>) => i1.NgForOf<T, U>`
Notice how this refers to the type parameters `T` and `U`, so the type
constructor needs to be emitted into a scope where those types are
available, _and_ have the correct constraints.
Previously, the template type checker would detect the situation where a
type parameter is constrained, and would emit the type constructor
using strategy 2; within the directive type itself. This approach makes
any type references within the generic type constraints lexically
available:
```typescript
export class NgForOf<T, U extends NgIterable<T>> {
static ngTypeCtor<T = any, U extends NgIterable<T> = any>
(o: Pick<NgForOf<T, U>, 'ngForOf'>): NgForOf<T, U> { return null!; }
}
```
This commit introduces the ability to emit a type parameter with
constraints into a different context, under the condition that it can
be imported from an absolute module. This allows a generic type
constructor to be emitted into a type check block or type check file
according to strategy 1, as imports have been generated for all type
references within generic type constraints. For example:
```typescript
import * as i0 from '@angular/core';
import * as i1 from '@angular/common';
const _ctor1: <T = any, U extends i0.NgIterable<T> = any>
(o: Pick<i1.NgForOf<T, U>, 'ngForOf'>) => i1.NgForOf<T, U> = null!;
```
Notice how the generic type constraint of `U` has resulted in an import
of `@angular/core`, and the `NgIterable` is transformed into a qualified
name during the emitting process.
Resolves FW-1739
PR Close#34021
In the past, only the starting index of an expression Token has been
recorded, so a parser could demarkate the span of a token only by the
start locations of two tokens. This may lead to trailing whitespace
being included in the token span:
```html
{{ token1 + token2 }}
^^^^^^^^^ recorded span of `token1`
```
It's also not enough for a parser to determine the end of a token by
adding the length of the token value to the token's start location,
because lexed expression values may not exactly reflect the source code.
For example, `"d\\"e"` is lexed as a string token whose value is `d"e`.
Instead, this commit adds a `end` field to expression tokens. `end`
is one past the last index of the token source code. This will enable a
parser to determine the span of a token just by looking at that token.
This is a breaking change because the contructor interface of `Token`
has changed.
Part of #33477.
PR Close#33549
This commit fixes a bug in which we do testing for completions.
Subsequently, this exposes another bug in our implementation whereby
suggestions are not provided in "ngFor" where there should have been.
Currently, multiple test cases are grouped together in a single
template. This requires the template to be somewhat complete so that
test cases that depend on variables declared earlier would pass.
Consider the following example:
```
template: `
<div *ngFor="let ~{for-person}person of ~{for-people}people">
<span>Name: {{~{for-interp-person}person.~{for-interp-name}name}}</span>
<span>Age: {{person.~{for-interp-age}age}}</span>
</div>`,
```
In order to test `~{for-interp-person}`, `people` has to be included after
`~{for-people}`. This means the test case for `~{for-people}` is not
reflective of the actual use case because the variable is already there!
In real case, the expression would be incomplete, and our implementation
failed to take that into account.
This commit breaks such test into individual tests, and fix the bugs in
the underlying implementation.
PR Close#34473
Angular View Engine uses global knowledge to compile the following code:
```typescript
export class Base {
constructor(private vcr: ViewContainerRef) {}
}
@Directive({...})
export class Dir extends Base {
// constructor inherited from base
}
```
Here, `Dir` extends `Base` and inherits its constructor. To create a `Dir`
the arguments to this inherited constructor must be obtained via dependency
injection. View Engine is able to generate a correct factory for `Dir` to do
this because via metadata it knows the arguments of `Base`'s constructor,
even if `Base` is declared in a different library.
In Ivy, DI is entirely a runtime concept. Currently `Dir` is compiled with
an ngDirectiveDef field that delegates its factory to `getInheritedFactory`.
This looks for some kind of factory function on `Base`, which comes up
empty. This case looks identical to an inheritance chain with no
constructors, which works today in Ivy.
Both of these cases will now become an error in this commit. If a decorated
class inherits from an undecorated base class, a diagnostic is produced
informing the user of the need to either explicitly declare a constructor or
to decorate the base class.
PR Close#34460
Adds a compilation error if the consumer tries to pass in an undecorated class into the `providers` of an `NgModule`, or the `providers`/`viewProviders` arrays of a `Directive`/`Component`.
PR Close#34460
The function `makeTemplateDiagnostic` was accepting an error code of type
`number`, making it easy to accidentally pass an `ErrorCode` directly and
not convert it to an Angular diagnostic code first.
This commit refactors `makeTemplateDiagnostic` to accept `ErrorCode` up
front, and convert it internally. This is less error-prone.
PR Close#34460
Previously, ngtsc would perform scope analysis (which directives/pipes are
available inside a component's template) and template type-checking of that
template as separate steps. If a component's scope was somehow invalid (e.g.
its NgModule imported something which wasn't another NgModule), the
component was treated as not having a scope. This meant that during template
type-checking, errors would be produced for any invalid expressions/usage of
other components that should have been in the scope.
This commit changes ngtsc to skip template type-checking of a component if
its scope is erroneous (as opposed to not present in the first place). Thus,
users aren't overwhelmed with diagnostic errors for the template and are
only informed of the root cause of the problem: an invalid NgModule scope.
Fixes#33849
PR Close#34460
Previously each NgModule trait checked its own scope for valid declarations
during 'resolve'. This worked, but caused the LocalModuleScopeRegistry to
declare that NgModule scopes were valid even if they contained invalid
declarations.
This commit moves the generation of diagnostic errors to the
LocalModuleScopeRegistry where it belongs. Now the registry can consider an
NgModule's scope to be invalid if it contains invalid declarations.
PR Close#34460
The template type checker generates TypeScript expressions for any
expression that occurs in a template, so that TypeScript can check it
and produce errors. Some expressions as they occur in a template may be
translated into TypeScript code multiple times, for instance a binding
to a directive input that has a template guard.
One example would be the `NgIf` directive, which has a template guard to
narrow the type in the template as appropriate. Given the following
template:
```typescript
@Component({
template: '<div *ngIf="person">{{ person.name }}</div>'
})
class AppComponent {
person?: { name: string };
}
```
A type check block (TCB) with roughly the following structure is
created:
```typescript
function tcb(ctx: AppComponent) {
const t1 = NgIf.ngTypeCtor({ ngIf: ctx.person });
if (ctx.person) {
"" + ctx.person.name;
}
}
```
Notice how the `*ngIf="person"` binding is present twice: once in the
type constructor call and once in the `if` guard. As such, TypeScript
will check both instances and would produce duplicate errors, if any
were found.
Another instance is when the safe navigation operator is used, where an
expression such as `person?.name` is emitted into the TCB as
`person != null ? person!.name : undefined`. As can be seen, the
left-hand side expression `person` occurs twice in the TCB.
This commit adds the ability to insert markers into the TCB that
indicate that any errors within the expression should be ignored. This
is similar to `@ts-ignore`, however it can be applied more granularly.
PR Close#34417
Previously, the type checker would compute an absolute source span by
combining an expression AST node's `ParseSpan` (relative to the start of
the expression) together with the absolute offset of the expression as
represented in a `ParseSourceSpan`, to arrive at a span relative to the
start of the file. This information is now directly available on an
expression AST node in the `AST.sourceSpan` property, which can be used
instead.
PR Close#34417
Instead of downloading Yarn separately for Bazel, we could use
our existing copy of Yarn that we maintain for CI jobs that do
not use Bazel. This ensures we use consistent versions of Yarn
across our CI jobs, and also avoids unnecessary downloads to the
Bazel mirror server, or Yarn download servers.
PR Close#34472
Now that the source to typings matching is able to handle
aliasing of exports, there is no need to handle aliases in private
declarations analysis.
These were originally added to cope when the typings files had
to use the name that the original source files used when exporting.
PR Close#34254
Previously the identifiers used in the typings files were the same as
those used in the source files.
When the typings files and the source files do not match exactly, e.g.
when one of them is flattened, while the other is a deep tree, it is
possible for identifiers to be renamed.
This commit ensures that the correct identifier is used in typings files
when the typings file does not export the same name as the source file.
Fixes https://github.com/angular/ngcc-validation/pull/608
PR Close#34254
The naïve matching algorithm we previously used to match declarations in
source files to declarations in typings files was based only on the name
of the thing being declared. This did not handle cases where the declared
item had been exported via an alias - a common scenario when one of the two
file sets (source or typings) has been flattened, while the other has not.
The new algorithm tries to overcome this by creating two maps of export
name to declaration (i.e. `Map<string, ts.Declaration>`).
One for the source files and one for the typings files.
It then joins these two together by matching export names, resulting in a
new map that maps source declarations to typings declarations directly
(i.e. `Map<ts.Declaration, ts.Declaration>`).
This new map can handle the declaration names being different between the
source and typings as long as they are ultimately both exported with the
same alias name.
Further more, there is one map for "public exports", i.e. exported via the
root of the source tree (the entry-point), and another map for "private
exports", which are exported from individual files in the source tree but
not necessarily from the root. This second map can be used to "guess"
the mapping between exports in a deep (non-flat) file tree, which can be
used by ngcc to add required private exports to the entry-point.
Fixes#33593
PR Close#34254
In TS we can re-export imports using statements of the form:
```
export * from 'some-import';
```
This is downleveled in UMD to:
```
function factory(exports, someImport) {
function __export(m) {
for (var p in m) if (!exports.hasOwnProperty(p)) exports[p] = m[p];
}
__export(someImport);
}
```
This commit adds support for this.
PR Close#34254
In TS we can re-export imports using statements of the form:
```
export * from 'some-import';
```
This can be downleveled in CommonJS to either:
```
__export(require('some-import'));
```
or
```
var someImport = require('some-import');
__export(someImport);
```
Previously we only supported the first downleveled version.
This commit adds support for the second version.
PR Close#34254
Previously individual properties of the src bundle program were
passed to the reflection host constructors. But going forward,
more properties will be required. To prevent the signature getting
continually larger and more unwieldy, this change just passes the
whole src bundle to the constructor, allowing it to extract what it
needs.
PR Close#34254
When a HTML Ast containing an Attribute node is converted to a Template Ast,
the attribute node might get dropped from the Template Ast path.
This is because the AttrNode is not even in the Template Ast to begin with.
In this case, we manually fix the path by converting the Attribute node
to a AttrAst node and appending it to the path.
This allows the `ExpressionVisitor` to properly visit the leaf node in the
TemplateAst path. We no longer need to visit the `Element` and look for
attributes.
PR Close#34459
Prior to this change, the ExpressionChangedAfterChecked error thrown in Ivy was missing useful information that was available in View Engine, specifically: missing property name for proprty bindings and also the content of the entire property interpolation (only a changed value was displayed) if one of expressions was changed unexpectedly. This commit improves the error message by including the mentioned information into the error text.
PR Close#34381
Previously, bound events were incorrectly bound to directives with
inputs matching the bound event attribute. This fixes that so bound
events can only be bound to directives with matching outputs.
Adds tests for all kinds of directive matching on bound attributes.
PR Close#31938
This is not expected to have any noticeable perf impact, but it wasteful
nonetheless (and annoying when stepping through the code while debugging
`ngtsc`/`ngcc`).
PR Close#34441
The `aio_monitoring_stable` CI job is triggered as a cronjob on the
master branch and its purpose is to run some e2e tests against the
deployed stable version of the docs web-app at https://angular.io/. In
order for the tests to be compatible with the deployed version of the
web-app (which gets deployed from the stable branch), the stable branch
is checked out in git as part of the CI job.
Previously, we only checked out the `aio/` directory from the stable
branch, leaving the rest of the code at master. This doesn't matter as
long as the commands used to run the tests do not rely on code outside
of `aio/`. However, it turns out that there _is_ code outside of `aio/`
that affects the executed commands: It is our vendored version of yarn
(in `third_party/github.com/yarnpkg/`), which overwrites the global yarn
installed on the docker image on CI and must match the version range
specified in `aio/package.json > engines`.
Using the yarn version checked out from the master branch with the
`aio/` code checked out from the stable branch can lead to failures
such as [this one][1].
This commit fixes the problem by checking out both the `aio/` and
`third_party/github.com/yarnpkg/` directories from the stable branch and
re-running the steps to overwrite the global yarn executable with our
own version from `third_party/github.com/yarnpkg/`. This ensures that
the version of yarn used will be compatible with the version range
specified in `aio/package.json > engines`.
NOTE:
We cannot checkout everything from the stable branch, since the CI
config (`.circleci/config.yml` from the master branch) may try to run
certain scripts (such as `.circleci/get-vendored-yarn-path.js`) that are
not available on the stable branch. Therefore, we should only check out
the necessary bits from the stable branch.
[1]: https://circleci.com/gh/angular/angular/567315
PR Close#34451
in the getting started page (first tutorial) file products.ts which was not shown and was only present in the StackBlitz examples. So added a refrence that it is present in the example and also added a note that examples may carry filenames not present please look at StackBliz examples for details
Fixes#34291
PR Close#34301
Updates the material-unit-tests job commit SHA to the most recent
commit at the time of writing. The goal is to run the unit tests
with 6ae74a0eb2
that improved stability of a few menu tests that were flaky.
e.g. https://circleci.com/gh/angular/angular/564650
PR Close#34430
This commit adds three previously missing validations to
NgModule.declarations:
1. It checks that declared classes are actually within the current
compilation.
2. It checks that declared classes are directives, components, or pipes.
3. It checks that classes are declared in at most one NgModule.
PR Close#34404
NgModel internally coerces any arbitrary value that will assigned
to the `disabled` `@Input` to a boolean. This has been done to
support the common case where developers set the disabled attribute
without a value. For example:
```html
<input type="checkbox" [(ngModel)]="value" disabled>
```
This worked in View Engine without any errors because inputs were
not strictly checked. In Ivy though, developers can opt-in into
strict template type checking where the attribute would be flagged.
This is because the `NgModel#isDisabled` property type-wise only
accepts a `boolean`. To ensure that the common pattern described
above can still be used, and to reflect the actual runtime behavior,
we should add an acceptance member that makes it work without type
checking errors.
Using a coercion member means that this is not a breaking change.
PR Close#34438
Given the following HTML and cursor position:
```
<div c|></div>
^ cursor is here
```
Note that the cursor is **after** the attribute `c`.
Under the current implementation, only `Element` is included in the
path. Instead, it should be `Element -> Attribute`.
This bug occurs only for cases where the cursor is right after the Node,
and it is because the `end` position of the span is excluded from the search.
Instead, the `end` position should be included.
PR Close#34440
`let` and `of` should be considered reserved keywords in template syntax
and thus should not be part of the autocomplete suggestions.
For reference, TypeScript does not provide such completions.
This commit removes these results and cleans up the code.
PR Close#34434
The ordering matters because we don't currently throw if multiple
configurations are provided (i.e. provider has *both* useExisting and
useFactory). We should actually throw an error in this case, but to
avoid another breaking change in v9, this PR simply aligns the Ivy
behavior with ViewEngine.
PR Close#34433
In the TransitionAnimationEngine we keep track of the existing elements with animations and we clear the cached data when they're removed. We also have some logic where we transition away the child elements when a parent is removed, however in that case we never cleared the cached element data which resulted in a memory leak. The leak is particularly visible in Material where whenever there's an animated overlay with a component inside of it that has an animation, the child component would always be retained in memory.
Fixes#25744.
PR Close#34409
Prior to ivy, undefined values passed in an object to the
ngStyle directive were ignored. Restore this behavior by
ignoring keys that point to undefined values.
closes#34310
PR Close#34422
Currently the `saucelabs_view_engine` job fails because
the Saucelabs Bazel run script thinks that `--config=saucelabs`
is a flag targeting the actual script. This is not the case and
the flag should be actually part of the bazel command.
PR Close#34429
Expressions in an inline template binding are improperly recorded as
spaning an offset calculated from the start of the template binding
attribute key, whereas they should be calculated from the start of the
attribute value, which contains the actual binding AST.
PR Close#31813
There were some extra examples for `downgradeComponent()` in the upgrade
guide. Added a link to the relevant section of the guide in the
`downgradeComponent()` docs.
Fixes#31584
PR Close#34406
Currently the Saucelabs test output (also an issue in the POC bazel
saucelabs master-only cronjob), is very verbose because two Karma
reporters conflict. Basically resulting in the progress messages
being printed in new lines (while they usually are just updated
using a tty cursor reset).
PR Close#34277
Currently we only run Saucelabs on PRs using the legacy View Engine
build. Switching that build to Ivy is not trivial and there are various
options:
1. Updating the R3 switches to use POST_R3 by default. At first glance,
this doesn't look easy because the current ngtsc switch logic seems to
be unidirectional (only PRE_R3 to POST_R3).
2. Updating the legacy setup to run with Ivy. This sounds like the easiest
solution at first.. but it turns out to be way more complicated. Packages
would need to be built with ngtsc using legacy tools (i.e. first building
the compiler-cli; and then building packages) and View Engine only tests
would need to be determined and filtered out. Basically it will result in
re-auditing all test targets. This is contradictory to the fact that we have
this information in Bazel already.
3. Creating a new job that runs tests on Saucelabs with Bazel. We specify
fine-grained test targets that should run. This would be a good start
(e.g. acceptance tests) and also would mean that we do not continue maintaining
the legacy setup..
This commit implements the third option as it allows us to move forward
with the general Bazel migration. We don't want to spend too much time
on our legacy setup since it will be removed anyway in the future.
PR Close#34277
We keep a version of yarn in the repo, at
`third_party/github.com/yarnpkg/`. All CI jobs should use that version
for consistency (and easier updates).
Previously, the Windows jobs did not use the local version. They used
the version that came pre-installed on the docker image that we used.
This made it more difficult to update the yarn version (something that
we might want to do independently of updating other dependencies, such
as Node.js).
This commit fixes this by setting up the Windows CI jobs to also use the
local, vendored version of yarn.
PR Close#34384
We keep a version of yarn in the repo, at
`third_party/github.com/yarnpkg/`. All CI jobs (including Windows ones)
should use that version for consistency (and easier updates). The path
to the actual `yarn.js` script, however, changes depending on the
version (e.g. `third_party/github.com/yarnpkg/v1.21.1/...`).
(NOTE: The Windows jobs are currently not using this local version, but
that should be fixed in a subsequent commit.)
Previously, when updating the local version of yarn, we would
potentially have to update the path in several places.
This commit addresses the problem by adding a Node.js script that infers
the correct path. The script can be used in all places where we need to
use the local version of yarn (including both Linux and Windows CI
jobs), thus eliminating the need to update the path in several places.
PR Close#34384
Since #32537, the `.circleci/get-commit-range.js` script is no longer
used in `.circleci/env.sh`. This commit removes the now unused local
variable to the script's path.
PR Close#34384
When we log DI errors we get the name of the provider via `SomeClass.name`. In IE functions that inherit from other functions don't have their own `name`, but they take the `name` from the lowest parent in the chain, before `Function`. I've added some changes to fall back to parsing out the function name from the function's string form.
PR Close#34305
The way definitions are added in JIT mode is through `Object.defineProperty`, but the problem is that in IE10 properties defined through `defineProperty` won't be inherited which means that inheriting injectable definitions no longer works. These changes add a workaround only for JIT mode where we define a fallback method for retrieving the definition. This isn't ideal, but it should only be required until v10 where we'll no longer support inheriting injectable definitions from undecorated classes.
PR Close#34305
In JIT mode we use `__proto__` when reading constructor parameter metadata, however it's not supported on IE10. These changes switch to using `Object.getPrototypeOf` instead.
PR Close#34305
We've got some tests that assert that the generate DOM looks correct. The problem is that IE changes the attribute order in `innerHTML` which caused the tests to fail. I've reworked the relevant tests not to assert directly against `innerHTML`.
PR Close#34305
We have a couple of cases where we use something like `typeof Node === 'function'` to figure out whether we're in a worker context. This works in most browsers, but IE returns `object` instead of `function`. I've updated all the usages to account for it.
PR Close#34305
In `DebugElement.attributes` we return all of the attributes from the underlying DOM node. Most browsers change the attribute names to lower case, but IE preserves the case and since we use camel-cased attributes, the return value was inconsitent. I've changed it to always lower case the attribute names.
PR Close#34305
While sanitizing on browsers that don't support the `template` element (pretty much only IE), we create an inert document and we insert content into it via `document.body.innerHTML = unsafeHTML`. The problem is that IE appears to parse the HTML passed to `innerHTML` differently, depending on whether the element has been inserted into a document or not. In particular, it seems to split some strings into multiple text nodes, which would've otherwise been a single node. This ended up throwing off some of the i18n code down the line and causing a handful of failures. I've worked around it by creating a new inert `body` element into which the HTML would be inserted.
PR Close#34305
This reverts commit f029af50820765019413fa319330830306b80d6a while we investigate
some failures on master on Circle CI. Currently the Windows tests and the
"test-ivy-aot" jobs are red because of incompatible yarn versions.
PR Close#34402
A quirk of the Angular template parser is that when parsing templates in the
"default" mode, with options specified by the user, the source mapping
information in the template AST may be inaccurate. As a result, the compiler
parses the template twice: once for "emit" and once to produce an AST with
accurate sourcemaps for diagnostic production.
Previously, only the first parse was performed during analysis. The second
parse occurred during the template type-checking phase, just in time to
produce the template type-checking file.
However, with the reuse of analysis results during incremental builds, it
makes more sense to do the diagnostic parse eagerly during analysis so that
the work isn't unnecessarily repeated in subsequent builds. This commit
refactors the `ComponentDecoratorHandler` to do both parses eagerly, which
actually cleans up some complexity around template parsing as well.
PR Close#34334
Avoids the usage of array destructuring, as it introduces calls to
a `__values` helper function in ES5 that has a relatively high
performance impact. This shaves off roughly 130ms of CPU time for a
large compilation with big templates that uses i18n.
PR Close#34332
The template parser has a certain interpolation config associated with
it and builds a regular expression each time it needs to extract the
interpolations from an input string. Since the interpolation config is
typically the default of `{{` and `}}`, the regular expression doesn't
have to be recreated each time. Therefore, this commit creates only a
single regular expression instance that is used for the default
configuration.
In a large compilation unit with big templates, computing the regular
expression took circa 275ms. This change reduces this to effectively
zero.
PR Close#34332
On a large compilation unit with big templates, the total time spent in
the `PlainCharacterCursor` constructor was 470ms. This commit applies
two optimizations to reduce this time:
1. Avoid the object spread operator within the constructor, as the
generated `__assign` helper in the emitted UMD bundle (ES5) does not
optimize well compared to a hardcoded object literal. This results in a
significant performance improvement. Because of the straight-forward
object literal, the VM is now much better able to optimize the memory
allocations which makes a significant difference as the
`PlainCharacterCursor` constructor is called in tight loops.
2. Reduce the number of `CharacterCursor` clones. Although cloning
itself is now much faster because of the optimization above, several
clone operations were not necessary.
Combined, these changes reduce the total time spent in the
`PlainCharacterCursor` constructor to just 10ms.
PR Close#34332
During TypeScript module resolution, a lot of filesystem requests are
done. This is quite an expensive operation, so a module resolution cache
can be used to speed up the process significantly.
This commit lets the Ivy compiler perform all module resolution with a
module resolution cache. Note that the module resolution behavior can be
changed with a custom compiler host, in which case that custom host
implementation is responsible for caching. In the case of the Angular
CLI a custom compiler host with proper module resolution caching is
already in place, so the CLI already has this optimization.
PR Close#34332
The export scope of NgModules from external compilations units, as
present in .d.ts declarations, does not change during a compilation so
can be easily shared. There was already a cache but the computed export
scope was not actually stored there. This commit fixes that.
PR Close#34332
To create a binding parser, an instance of `ElementSchemaRegistry` is
required. Prior to this change, each time a new binding parser was
created a new instance of `DomElementSchemaRegistry` would be
instantiated. This is an expensive operation that takes roughly 1ms per
instantiation, so it is key that multiple allocations are avoided.
By sharing a single `DomElementSchemaRegistry`, we avoid two such
allocations, i.e. save ~2ms, per component template.
PR Close#34332
Previously the calls to run the schematics were not being properly
or consistently awaited in the tests. While this currently does not
affect the tests' performance, this fix corrects the syntax and
adds stability for future changes.
PR Close#34364
In Ivy it's illegal for a template to write to a template variable. So the
template:
```html
<ng-template let-somevar>
<button (click)="somevar = 3">Set var to 3</button>
</ng-template>
```
is erroneous and previously would fail to compile with an assertion error
from the `TemplateDefinitionBuilder`. This error wasn't particularly user-
friendly, though, as it lacked the context of which template or where the
error occurred.
In this commit, a new check in template type-checking is added which detects
such erroneous writes and produces a true diagnostic with the appropriate
context information.
Closes#33674
PR Close#34339
Previously, the compiler performed an incremental build by analyzing and
resolving all classes in the program (even unchanged ones) and then using
the dependency graph information to determine which .js files were stale and
needed to be re-emitted. This algorithm produced "correct" rebuilds, but the
cost of re-analyzing the entire program turned out to be higher than
anticipated, especially for component-heavy compilations.
To achieve performant rebuilds, it is necessary to reuse previous analysis
results if possible. Doing this safely requires knowing when prior work is
viable and when it is stale and needs to be re-done.
The new algorithm implemented by this commit is such:
1) Each incremental build starts with knowledge of the last known good
dependency graph and analysis results from the last successful build,
plus of course information about the set of files changed.
2) The previous dependency graph's information is used to determine the
set of source files which have "logically" changed. A source file is
considered logically changed if it or any of its dependencies have
physically changed (on disk) since the last successful compilation. Any
logically unchanged dependencies have their dependency information copied
over to the new dependency graph.
3) During the `TraitCompiler`'s loop to consider all source files in the
program, if a source file is logically unchanged then its previous
analyses are "adopted" (and their 'register' steps are run). If the file
is logically changed, then it is re-analyzed as usual.
4) Then, incremental build proceeds as before, with the new dependency graph
being used to determine the set of files which require re-emitting.
This analysis reuse avoids template parsing operations in many circumstances
and significantly reduces the time it takes ngtsc to rebuild a large
application.
Future work will increase performance even more, by tackling a variety of
other opportunities to reuse or avoid work.
PR Close#34288
Previously 'analyze' in the various `DecoratorHandler`s not only extracts
information from the decorators on the classes being analyzed, but also has
several side effects within the compiler:
* it can register metadata about the types involved in global metadata
trackers.
* it can register information about which .ngfactory symbols are actually
needed.
In this commit, these side-effects are moved into a new 'register' phase,
which runs after the 'analyze' step. Currently this is a no-op refactoring
as 'register' is always called directly after 'analyze'. In the future this
opens the door for re-use of prior analysis work (with only 'register' being
called, to apply the above side effects).
Also as part of this refactoring, the reification of NgModule scope
information into the incremental dependency graph is moved to the
`NgtscProgram` instead of the `TraitCompiler` (which now only manages trait
compilation and does not have other side effects).
PR Close#34288
Prior to this commit, the `IvyCompilation` tracked the state of each matched
`DecoratorHandler` on each class in the `ts.Program`, and how they
progressed through the compilation process. This tracking was originally
simple, but had grown more complicated as the compiler evolved. The state of
each specific "target" of compilation was determined by the nullability of
a number of fields on the object which tracked it.
This commit formalizes the process of compilation of each matched handler
into a new "trait" concept. A trait is some aspect of a class which gets
created when a `DecoratorHandler` matches the class. It represents an Ivy
aspect that needs to go through the compilation process.
Traits begin in a "pending" state and undergo transitions as various steps
of compilation take place. The `IvyCompilation` class is renamed to the
`TraitCompiler`, which manages the state of all of the traits in the active
program.
Making the trait concept explicit will support future work to incrementalize
the expensive analysis process of compilation.
PR Close#34288
Previously the UMD rendering formatter assumed that
there would already be import (and an export) arguments
to the UMD factory function.
This commit adds support for this corner case.
Fixes#34138
PR Close#34353
This reverts commit ec7ea77aa8d90d2ba32089e140ed716cb6aadb89 because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 73fd10ddd5548ce899b897ba2779ff041914c2dc because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 6b905347bd2294bba703f6d38c983356af58946b because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 810b7072d0a9ba0b07162f7a600a75347b06d379 because it's part
of a PR that was red on CircleCI once it was merged into master (Windows tests
are only run on master, not on PRs).
PR Close#34360
This reverts commit 4e38a973b158ba397903199abe1e008b0627d81c because it's part of a PR
that was red on CircleCI once it was merged into master (Windows tests are only run
on master, not on PRs).
PR Close#34360
When statically evalulating UMD code it is possible to find
that we are looking for the declaration of an identifier that
actually came from a typings file (rather than a UMD file).
Previously, the UMD reflection host would always try to use
a UMD specific algorithm for finding identifier declarations,
but when the id is actually in a typings file this resulted in the
returned declaration being the containing file of the declaration
rather than the declaration itself.
Now the UMD reflection host will check to see if the file containing
the identifier is a typings file and use the appropriate stategy.
PR Close#34356
The `loadTranslations()` function will attach the `translate()` function
to `$localize.translate` to cause runtime translation to occur.
We should cleanup after ourselves by unattaching this function when
we call `clearTranslations()`.
Fixes#32781
PR Close#34346
This release brings a bug fix that https://github.com/angular/angular/pull/34243 is waiting on in order to remove rules_nodejs patches: fix(builtin): additional_root_paths in pkg_web should also include paths in genfiles and bin dirs (bazelbuild/rules_nodejs#1402)
PR Close#34112
For the purposes of the integration test the zone.js script & bundle script tags could just go into the source index.html itself. The purpose of the integration test is is to test @angular/bazel & ng_module & ng_package so there is no need to exercise html_insert_assets.
PR Close#34112
This commit fixes a couple issues that prevent `class_binding` benchmark from running: moving constants requires by the `benchmark` function before function declaration and referencing correct consts in template instructions.
PR Close#34242
The headers of two of the code-snippets in the [Input section](https://angular.io/start#input)
of the "Getting Started" guide incorrectly referenced an non-existent
file path (`src/app/product-list/product-alerts.component.ts`).
This commit fixes the headers to show the correct file path
(`src/app/product-alerts/product-alerts.component.ts`).
Fixes#34320
PR Close#34321
The `ModuleWithProviders` type has an optional type parameter that
should be specified to indicate what NgModule class will be provided.
This enables the Ivy compiler to statically determine the NgModule type
from the declaration files. This type parameter will become required in
the future, however to aid in the migration the compiler will detect
code patterns where using `ModuleWithProviders` as return type is
appropriate, in which case it transforms the emitted .d.ts files to
include the generic type argument.
This should reduce the number of occurrences where `ModuleWithProviders`
is referenced without its generic type argument.
Resolves FW-389
PR Close#34235
This commit refactors the way the compiler transforms .d.ts files during
ngtsc builds. Previously the `IvyCompilation` kept track of a
`DtsFileTransformer` for each input file. Now, any number of
`DtsTransform` operations that need to be applied to a .d.ts file are
collected in the `DtsTransformRegistry`. These are then ran using a
single `DtsTransformer` so that multiple transforms can be applied
efficiently.
PR Close#34235
The metadata collector for View Engine compilations emits error symbols
for static class members that have not been initialized, which prevents
a library from building successfully when `strictMetadataEmit` is
enabled, which is recommended for libraries to avoid issues in library
consumers. This is troublesome for libraries that are adopting static
members for the Ivy template type checker: these members don't need a
value assignment as only their type is of importance, however this
causes metadata errors. As such, a library used to be required to
initialize the special static members to workaround this error,
undesirably introducing a code-size overhead in terms of emitted
JavaScript code.
This commit modifies the collector logic to specifically ignore
the special static members for Ivy's template type checker, preventing
any errors from being recorded during the metadata collection.
PR Close#34296
For Ivy's template type checker it is possible to let a directive
specify static members to allow a wider type for some input:
```typescript
export class MatSelect {
@Input() disabled: boolean;
static ngAcceptInputType_disabled: boolean | string;
}
```
This allows a binding to the `MatSelect.disabled` input to be of type
boolean or string, whereas the `disabled` property itself is only of
type boolean.
Up until now, any static `ngAcceptInputType_*` property was not
inherited for subclasses of a directive class. This is cumbersome, as
the directive's inputs are inherited, so any acceptance member should as
well. To resolve this limitation, this commit extends the flattening of
directive metadata to include the acceptance members.
Fixes#33830
Resolves FW-1759
PR Close#34296
TypeScript 3.7 flags `if` conditions that implicitly coerce a function/method definition. While checking for the `template` presence on a def (actually checking whether we work with Component) in `saveNameToExportMap`, the `if` condition had implicit type coercion. This commit updates the condition to use the `isComponentDef` function (that checks `def.template` against `null` internally) to avoid compilation errors with TypeScript 3.7.
PR Close#34335
Prior to this commit, values wrapped into SafeStyle were not handled correctly in [style.prop] bindings in case style sanitizer is present (when template contains some style props that require sanitization). Style sanitizer was not unwrapping values in case a given prop doesn't require sanitization.As a result, wrapped values were used as final styling values (see https://github.com/angular/angular/blob/master/packages/core/src/render3/styling/bindings.ts#L620). This commit updates the logic to unwrap safe values in sanitizer in case no sanitization is required.
PR Close#34286
The undecorated child migration creates a synthetic decorator, which
contained `"exportAs": ["exportName"]` as obtained from the metadata of
the parent class. This is a problem, as `exportAs` needs to specified
as a comma-separated string instead of an array. This commit fixes the
bug by transforming the array of export names back to a comma-separated
string.
PR Close#34014
When ngcc is analyzing synthetically inserted decorators from a
migration, it is typically not expected that any diagnostics are
produced. In the situation where a diagnostic is produced, however, the
diagnostic would not be reported at all. This commit ensures that
diagnostics in migrations are reported.
PR Close#34014
The compiler exports a `formatDiagnostics` function which consumers can use
to print both ts and ng diagnostics. However, this function was previously
using the "old" style TypeScript diagnostics, as opposed to the modern
diagnostic printer which uses terminal colors and prints additional context
information.
This commit updates `formatDiagnostics` to use the modern formatter, plus to
update Ivy's negative error codes to Angular 'NG' errors.
The Angular CLI needs a little more work to use this function for printing
TS diagnostics, but this commit alone should fix Bazel builds as ngc-wrapped
goes through `formatDiagnostics`.
PR Close#34234
Occasionally a factory function needs to be generated for an "invalid"
constructor (one with parameters types which aren't injectable). Typically
this happens in JIT mode where understanding of parameters cannot be done in
the same "up-front" way that the AOT compiler can.
This commit changes the JIT compiler to generate a new `invalidFactoryDep`
call for each invalid parameter. This instruction will error at runtime if
called, indicating both the index of the invalid parameter as well as (via
the stack trace) the factory function which was generated for the type being
constructed.
Fixes#33637
PR Close#33739
In Ivy, if you do:
`TestBed.configureTestingModule({providers: [{provide: Service}]});`
the injector will attempt to inject Service as if it was simply listed
in the providers array like `{providers: [Service]}`
This fixes an inconsistency when similarly providing an override with no
`useValue` or `useFactory`.
PR Close#33769
Previously the JIT evaluated code for ivy localized strings included
backtick tagged template strings, which are not compatible with ES5
in legacy browsers such as IE 11.
Now the generated code is ES5 compatible.
Fixes#34246
PR Close#34265
Prior to this commit, calling change detection for destroyed views resulted in errors being thrown in some cases. This commit adds a check to make sure change detection is invoked for non-destroyed views only.
PR Close#34241
Previously, ternary expressions were emitted as:
condExpr ? trueCase : falseCase
However, this causes problems when ternary operations are nested. In
particular, a template expression of the form:
a?.b ? c : d
would have compiled to:
a == null ? null : a.b ? c : d
The ternary operator is right-associative, so that expression is interpreted
as:
a == null ? null : (a.b ? c : d)
when in reality left-associativity is desired in this particular instance:
(a == null ? null : a.b) ? c : d
This commit adds a check in the expression translator to detect such
left-associative usages of ternaries and to enforce such associativity with
parentheses when necessary.
A test is also added for the template type-checking expression translator,
to ensure it correctly produces right-associative expressions for ternaries
in the user's template.
Fixes#34087
PR Close#34221
Remove the remaining check for compile build variable in the ng_module
rule. Now that components is no longer relying on this build variable
we can safely remove it from our repository.
We will leave the remaining check for if the compile build variable is
used within our own repo, with plans to remove it in a couple months.
It is being kept in place to ensure that uncommitted local scripts for
our own development that we have locally, kill error as expected if
they still reference the compile build variable.
PR Close#34280
Before updating to remove the compile build variable, we must update
the components unit test integrations to a sha in the components
repo which no longer relies on the compile build variable.
PR Close#34280
Adds the ability to expose global symbols in the API docs via the `@globalApi` tag. Also supports optionally setting a namespace which will be added to the name automatically (e.g. `foo` will be renamed to `ng.foo`). Relevant APIs should also be exported through the `global.ts` file which will show up under `core/global`.
PR Close#34237
Due to a bug in the existing banner, `typescript` module was require-d
instead of reusing the module passed in from tsserver.
This bug is caused by some source files in language-service that imports
`typescript` instead of `typescript/lib/tsserverlibrary`.
This is not an unsupported use case, it's just that when typescript is
resolved in the banner we have to be very careful about which modules to
"require".
The convoluted logic in the banner makes it very hard to detect
anomalies. This commit cleans it up and removes a lot of unneeded code.
This commit also removes `ts` import in typescript_host.ts and use `tss`
instead to make it less confusing.
PR Close#34262
This commit creates a way for `ng_module` rule to compile with Ivy based
on the `ivy` attribute. This enables google3 targets to pick the
compiler without using `define` flags.
PR Close#34238
Rather than bumping up the allowed version of yarn on each release
we should instead just allow for anything within the major version
1 range.
PR Close#34236
On events page the header was not able to take full width when body exceeds viewport width of the screen So made the below body go overflow-x auto and resources page was taking 80% of the width which is okay on desktop but on mobile it should take 100% width put a media quer for it.
Fixes#34163
PR Close#34188
Currently all saucelabs usage in our repos is done using the same
account angular-ci. By migrating to use individual accounts
for each repo, we can better track the usage for each repo as well
as providing concurrency limiting on a per repo basis.
Additionally, we no longer use two separate accounts based on being
on master or a PR branch, so this logic can be removed.
PR Close#34233
Previously, create_angular_testing_module would export a mutable `let`
binding. The binding is already exporting using an accessor function
though, so the export on the let variable seems like an accidental
oversight.
This is functionally equivalent, but makes it easier for module
optimizers such as Closure Compiler to track down side effects and prune
modules.
PR Close#34232
Previously, browser_util would export a mutable `let` binding that was
initialized as a side-effect of `BrowserDetection.setup()`. This change
refactors the mutable binding into a `const` binding that is immediately
initialized in its initialized.
This is functionally equivalent, but makes it easier for module
optimizers such as Closure Compiler to track down side effects and prune
modules. It is also arguably cleaner to read (no worries about later
changes to the apparently mutable but effectively const binding).
PR Close#34207
This commit updates `@angular/material` and `@angular/cdk` to the
latest release candidate. Doing so exposed a bug in ngcc, which is fixed
by the preceding commit. Also the layout of these libraries changed, so
the checks in the integration test need a bit of tweaking.
PR Close#34212
Previously the `rootDir` was set to the entry-point path but
this is incorrect if the source files are stored in a directory outside
the entry-point path. This is the case in the latest versions of the
Angular CDK.
Instead the `rootDir` should be the containing package path, which is
guaranteed to include all the source for the entry-point.
---
A symptom of this is an error when ngcc is trying to process the source of
an entry-point format after the entry-point's typings have already been
processed by a previous processing run.
During processing the `_toR3Reference()` function gets called which in turn
makes a call to `ReflectionHost.getDtsDeclaration()`. If the typings files
are also being processed this returns the node from the dts typings files.
But if we have already processed the typings files and are now processing
only an entry-point format without typings, the call to
`ReflectionHost.getDtsDeclaration()` returns `null`.
When this value is `null`, a JS `valueRef` is passed through as the DTS
`typeRef` to the `ReferenceEmitter`. In this case, the `ReferenceEmitter`
fails during `emit()` because no `ReferenceEmitStrategy` is able to provide
an emission:
1) The `LocalIdentifierStrategy` is not able help because in this case
`ImportMode` is `ForceNewImport`.
2) The `LogicalProjectStrategy` cannot find the JS file below the `rootDir`.
The second strategy failure is fixed by this PR.
Fixes https://github.com/angular/ngcc-validation/issues/495
PR Close#34212
When directionality data was added to @angular/common locales, only
the externally used locales were updated. We need to additionally
update the closure locales which are synced into google3.
PR Close#34240
Commit that updated i18n message ids rendering (e524322c43) also introduced a couple tests that relied on a previous version of `ngI18nClosureMode` flag format. The `ngI18nClosureMode` usage format was changed in the followup commit (c4ce24647b) and triggered a problem with the mentioned tests. This commit updates the tests to a new `ngI18nClosureMode` flag usage format.
PR Close#34224
Currently our bazel saucelabs tests silently fail as it does not have
karma-sauce-launcher available from npm. By providing it as expected
we will properly run the bazel saucelabs tests once more
PR Close#34220
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
This comment ensures that generated template code guards
this global check.
PR Close#34211
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
PR Close#34211
This is a follow-up to #33997 where some new generic parameters were added without defaults which is technically a breaking change. These changes add the defaults.
PR Close#34206
Prior to this commit, there was no check in R3TestBed to verify that metadata is resolved using a given Type. That leads to some cryptic error messages (when TestBed tries to compile a Type without having metadata) in case TestBed override functions receive unexpected Types (for example a Directive is used in `TestBed.overrideComponent` call). This commit adds the necessary checks to verify metadata presence before TestBed tries to (re)compile a Type.
PR Close#34204
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Prior to this commit, i18n runtime code failed with the exception saying that no provider was found for ChangeDetectorRef for a pipe used in ICU. The problem happened because the underlying `createViewRef` function was not taking into account IcuContainer as a valid TNodeType. This commit updates the `createViewRef` function to return corresponding ViewRef for TNodeType.IcuContainer.
PR Close#34198
Includes a few minor performance improvements:
* In the `nextContext` instruction we assign a new LView to the `LFrame.contextLView` and then we immediately look it up to get its context. We don't need to do that since we know the view that was assigned already.
* Removes the default value for the `level` parameter of `nextContextImpl` because it generates more code in es5 and is internal-only.
* Removes the default parameter from `setActiveHostElement` since it generates extra code and it's an internal function.
* Makes a check in `setElementExitFn` more strict since we're guaranteed for the value to match the type.
PR Close#34183
The local Angular packages used to build `aio/` when running
`yarn setup-local`/`yarn build-local` (and related commands), are built
by bazel. Bazel, determines the version to use for these locally built
packages based on the latest tag for a commit on the current branch.
(This works as expected during the release, because the packages are
built on the correct branch with up-to-date tags.)
During local development, however, this often leads to generating older
versions than what the current `@angular/cli` version is compatible
with, if the user has not fetched the latest tags from `angular/angular`
or the branch has not been rebased recently.
Previously, the above (common) situation would result in a build error
by the CLI. (Note that this would be a false error, because in this case
the version set by bazel would not reflect the actual version of the
local packages.) The solution would be for the user to fetch the latest
tags from `angular/angular`, rebase their branch and run a bazel build
again (ensuring that it would actually build anew and not emit cached
artifacts). This was cumbersome and most people didn't even know about
it.
This commit avoids this error and the associated pain-points by
overwriting the versions of the installed local packages with fake
versions based on the ones in the lockfile, which are guaranteed to be
compatible with the currently used CLI version.
Fixes#34208
PR Close#34213
Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
It is possible for HTML formatters to add whitespace
around the content of `i18n` attribute values. This can
make the meaning and custom ids brittle to simple
whitespace formatting.
This commit ensures that the metadata string extracted
from HTML `i18n` attributes is trimmed before being parsed
into meaning, description and custom id.
PR Close#34154
By ensuring that legacy i18n message ids are rendered into the templates
of components for packages processed by ngcc, we ensure that these packages
can be used in an application that may provide translations in a legacy
format.
Fixes#34056
PR Close#34135
Placing this configuration in to the bundle avoids having to pass the
value around through lots of function calls, but also could enable
support for different behaviour per bundle in the future.
PR Close#34135
Now that `@angular/localize` can interpret multiple legacy message ids in the
metablock of a `$localize` tagged template string, this commit adds those
ids to each i18n message extracted from component templates, but only if
the `enableI18nLegacyMessageIdFormat` is not `false`.
PR Close#34135
This change will enable the Angular compiler to provide these legacy
message ids by default, which will solve problems with ngcc not knowing
whether to generate legacy ids or not.
PR Close#34135
When first written there was no way to specify the raw text when
programmatically creating a template tagged literal AST node.
This is now fixed in TS and so the hack is no longer needed.
PR Close#34135
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
With this change we fix the logic to detect if a package is installed, removing a package and add a package by using the CLI schematic helpers.
Also we save `@angular/bazel` package directly as a `devDependency` when doing `ng-add`.
Closes#34164
PR Close#34181
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
The ViewEngine translation extractor does not convert `-` to `_` for
placeholders that represent custom elements. For example `<app-component>`
gets converted to placeholders like `START_TAG_APP-COMPONENT`.
In `$localize` placeholders are expected to be snake-case, not kebab-case.
So we must normalize them when parsing a translation file that might have
been created via the View Engine translation extractor.
The `$localize` extraction code will normalize these placeholders when
creating translation files in the first place.
Fixes#34151
PR Close#34155
Various targets have their template type-checking disabled in the past.
There is no reason for this any more.
The only target that was tricky was packages/examples/core:core_examples
which was quite broken and I had to fix it up.
Template typechecking is still disabled under blaze, see FW-1753 for more
info.
PR Close#34144
due to an unfortunate condition in 168abc6d6f/packages/compiler-cli/src/ngtsc/program.ts (L430-L434) the typechecking has been disabled when running under bazel + ivy.
As far as I can tell the ivyTemplateTypeCheck flag is now obsolete, so removing this
code from ng_module.bzl is desirable. I'll send a separate PR to remove the flag completely.
PR Close#34144
The missing-injectable migration has been updated to handle a breaking change that is
unrelated to missing ´@Injectable` decorators. Though, the breaking change will be handled
as part of this migration since we did not want to create another migration (with all the boilerplate etc.)
The guide has been already updated to reflect the new pattern the migration handles, but we
should also rename the title of the guide to something that also mentions the other pattern.
Not renaming the guide URL since it is referenced in past releases and it's safer to keep the old
URL. The important thing is to change the actual rendered title.
PR Close#34125
If a Component or Directive is not part of any NgModule, the language
service currently produces an error message. This should not be an
error. Instead, it should be a suggestion.
This PR removes `ng.DiagnosticKind`, and instead reuses
`ts.DiagnosticCategory`.
PR closes https://github.com/angular/vscode-ng-language-service/issues/458
PR Close#34115
The language service incorrectly reports an error if it fails to find
NgModule metadata for a particular Component / Directive. In many cases,
the use case is legit, particularly in test.
This commit removes such diagnostic message and cleans up the interface
for `TypeScriptHost.getTemplateAst()`.
PR closes https://github.com/angular/vscode-ng-language-service/issues/463
PR Close#34113
To quicken migration for our own developers away from using compile=aot
for setting ivy, we actually fail the build process if the compile
build variable is used with a message to use our config flags instead.
PR Close#34109
To inform downstream users to switch to using angular_ivy_enabled as the build
variable for setting Ivy, a deprecation message is printed instructing the user
to migrate away from building with compile=*
PR Close#34109
Currently, variables of an unknown type in an `*ngFor` expression are
refined to have the type of the iterable binding of the `*ngFor`
expression. Unfortunately, this is a bug for variables aliasing
[values exported by
`*ngFor`](https://angular.io/api/common/NgForOf#local-variables),
including `index` and `first`, because they are also given the type of
the binding expression, but they are not of the binding type. For
example, in
```typescript
@Component({
selector: 'test',
template: `
<div *ngFor="let hero of heroes; let i = index; let isFirst = first">
{{ hero }}
</div>
`
})
export class TestComponent {
heroes: Hero[];
}
```
The local variables `i` and `isFirst` are determined to have a type of
`Hero`, when actually their types are `number` and `boolean`,
respectively.
This commit fixes this bug by checking if the value of a variable in an
`*ngFor` expression is known to be an export and assigning the variable
the type of that export value. Only if the variable does not alias an
export is it typed with the binding value of the `*ngFor` expression.
Closes https://github.com/angular/vscode-ng-language-service/issues/460
PR Close#34089
* This brings in a fix to the `@npm//foo:foo_files` targets for https://github.com/angular/angular/pull/33927 so the a rules_nodejs patch can be removed.
* It also brings a protractor_web_test fix that resolves the need for a work-around in /modules/playground/e2e_test/sourcemap/BUILD.bazel.
PR Close#34073
Previously, some RxJS-related examples (which are not proper Angular apps) were not
tested on CI as part of the `example-e2e` npm script. This meant that the examples
could get out-of-date or contain compile errors without as noticing.
This commit ensures that the `example-e2e` script picks up these examples and checks
that they compile successfully.
Partly addresses #28017.
PR Close#34063
This allows us to update the version of the package in a single place for all tests.
Notable exemption of this is aio which currently doesn't depend on anything installed in the root.
PR Close#34002
Previously, the Angular AOT compiler would always add a
`ɵprov` to injectables. But in ngcc this resulted in duplicate `ɵprov`
properties since published libraries already have this property.
Now in ngtsc, trying to add a duplicate `ɵprov` property is an error,
while in ngcc the additional property is silently not added.
// FW-1750
PR Close#34085
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
the package.json in these tests points to file:dist/packages-dist which
is not materialized on renovate-bot, so the bot freaks out and fails to
update the lock files.
This means that the bot currently just opens up PRs that can't be merged.
Example: https://github.com/angular/angular/pull/34071
(In the past this worked nicely because we didn't keep the yarn.lock files
in the git repo for these projects, but that had a problem with unpined
depenedencies and undeterministic build/test runs).
For now it's better to disable the bot by removing all the package.jsons
from the config. We should revisit this in the future have the bot update
the root package.json instead.
PR Close#34074
When creating synthesized tagged template literals, one must provide both
the "cooked" text and the "raw" (unparsed) text. Previously there were no
good APIs for creating the AST nodes with raw text for such literals.
Recently the APIs were improved to support this, and they do an extra
check to ensure that the raw text parses to be equal to the cooked text.
It turns out there is a bug in this check -
see https://github.com/microsoft/TypeScript/issues/35374.
This commit works around the bug by synthesizing a "head" node and morphing
it by changing its `kind` into the required node type.
// FW-1747
PR Close#34065
With Angular CLI version 9 RC 3 we can run a single migration for a package using the name of the migration schematic.
We need to pass the schematic name as a value to the `migrate-only` option.
Ex:
```
ng update @angular/core --migrate-only migration-v9-undecorated-classes-with-di
```
See: https://github.com/angular/angular-cli/pull/16174
PR Close#33958
We don't collect/review the results from CI, so it's just a waste of CPU time.
It's sufficient if we are able to run these locally and manually.
PR Close#34057
This bring is changes to the @nodejs repository required for https://github.com/angular/angular/pull/33927. See release notes for more details: https://github.com/bazelbuild/rules_nodejs/releases/tag/0.41.0.
rules_nodejs is approaching 1.0 and breaking changes for that release are being made more frequently. In this release, the ts_devserver API changed and it no longer injects html script tags into a provided index.html file. The diff on this commit is large as this breaking change affects quite a few tests.
Also note that we don’t update @angular/bazel schematics and integration/bazel as 0.41.0 is not a recommended update for angular users yet due to the breaking changes in ts_devserver & web_package (now named pkg_web). When a suitable plain npm package that is in progress is finished then it will be possible to easily replace the html injection functionality removed from ts_devserver & pkg_web.
PR Close#33996
In order to keep integration tests on CI as determinitstic as possible,
we need to ensure that the same dependencies (including transitive ones)
are installed each time. One way to ensure that is using a lockfile
(such as `yarn.lock`) to pin the dependencies to exact versions. This
works as long as the lockfile itself is in-sync with the corresponding
`package.json`, which specifies the dependencies.
Ideally, we would run `yarn install` with the `--frozen-lockfile` option
to verify that the lockfile is in-sync with `package.json`, but we
cannot do that for integration projects, because we want to be able to
install the locally built Angular packages). Therefore, we must manually
esnure that the integration project lockfiles remain in-sync, which is
error-prone.
This commit introduces a helper script that performs some checks on each
project's (non-local) dependencies:
- Ensure that exact versions (not version ranges) are specified in
`package.json`. This reduces the probability of installing a breaking
version of a direct or transitive dependency, in case of an
out-of-sync lockfile.
- Ensure that the lockfile is in-sync with `package.json` wrt these
dependencies.
While these checks are not full-proof, they provide yet another line of
defense against indeterminism.
PR Close#33968
Since we cannot run `yarn install` with the `--frozen-lockfile` option
(because we want to be able to install the locally built Angular
packages), integration project lockfiles are susceptible to getting
out-of-sync with the corresponding `package.json`. When this happens,
yarn will install the latest available version that satisfies the
version range specified in `package.json`.
This commit adds another line of defense, by specifying exact versions
for the dependencies in `package.json` files (i.e. `1.33.7` instead of
`^1.33.0`). While transitive dependencies will be unpinned, this still
ensures that the same version of direct dependencies will be installed
in case of an out-of-sync lockfile, thus reducing the probability of
random failures.
PR Close#33968
In the `integration_test` CircleCI job, we run `yarn install` on all
projects in the `integration/` directory. If a project has no lockfile
or if the lockfile is out-of-sync with the corresponding `package.json`
file, then the installed dependency versions are no longer pinned, which
can result in different versions being installed between different runs
of the same job (if, for example, a new version is released for a
package) and breaks hermeticity.
This could be prevented by using the `--frozen-lockfile` option with
`yarn install`, but this is not possible with the current setup, because
yarn needs to be able to install the locally built Angular packages,
whose checksums will be different from the ones in the lockfile.
Therefore, we have to manually ensure that the lockfiles remain in-sync
with the corresponding `package.json` files for the rest of the
dependencies.
For example, previously, [cli-hello-world-lazy/yarn.lock][1] had an
entry for `@angular-devkit/build-angular@0.900.0-next.9` (pinned to
`0.900.0-next.9`), but [cli-hello-world-lazy/package.json][2] specified
the `@angular-devkit/build-angular` version as `^0.900.0-rc.0` (note the
leading caret). As a result, since the version in the lock file does not
much the one in `package.json`, the lockfile is ignored and the latest
available version that matches `^0.900.0-rc.0` is installed.
This, for example, started causing unrelated CI failures ([example][3]),
when `@angular-devkit/build-angular@9.0.0-rc.3` was released with a size
improvement.
This commit ensures that all integration projects have a lockfile and
that lockfiles are up-to-date (with the current `package.json` files).
[1]: https://github.com/angular/angular/blob/fc2f6b845/integration/cli-hello-world-lazy/yarn.lock#L13
[2]: https://github.com/angular/angular/blob/fc2f6b845/integration/cli-hello-world-lazy/package.json#L26
[3]: https://circleci.com/gh/angular/angular/535959#tests/containers/2
PR Close#33968
Commit 53fc2ed8bf added support for
determining index types accessed using index signatures, but did not
include support for index types accessed using dot notation:
```typescript
const obj<T>: { [key: string]: T };
obj['stringKey']. // gets `T.` completions
obj.stringKey. // did not peviously get `T.` completions
```
This adds support for determining an index type accessed via dot
notation by rigging an object's symbol table to return the string index
signature type a property access refers to, if that property does not
explicitly exist on the object. This is very similar to @ivanwonder's
work in #29811.
`SymbolWrapper` now takes an additional parameter to explicitly set the
type of the symbol wrapped. This is done because
`SymbolTableWrapper#get` only has access to the symbol of the index
type, _not_ the index signature symbol itself. An attempt to get the
type of the index type will give an error.
Closes#29811
Closes https://github.com/angular/vscode-ng-language-service/issues/126
PR Close#33884
Now that all compile decisions are determined by the define=angular_ivy_enabled
flag, we can remove the setting of the define=compile flag throughout the repo.
PR Close#33983
Use angular_ivy_enabled to determine if Ivy is being used for the ivy_test_selector.ts symbols.
Additionally, remove the reflect_metadata genrules as we not longer have a "jit" compile option
so all possible invocations result in the same generated file. Instead we can just commit this
file.
PR Close#33983
We need to migrate to using angular_ivy_enabled value to determine whether to use
Ivy or ViewEngine for package building scripts and for size-tracking and
symbol-extract tooling.
PR Close#33983
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Beginning of migration away from --define=compile=* to --define=angular_ivy_enabled=*.
Additionally, to make it clearer to developers, we will encourage use of --config=ivy
instead of directy setting the --define flag, this abstraction will allow us more
flexibility as we move foward with relation to our compile decisions at build time.
PR Close#33983
Since we created the migration guide for the `missing-injectable` schematic, the schematic
changed in various ways. e.g. the migration no longer migrates classes passed to `useExisting`
Additionally the migration has been expanded to handle another Ivy breaking change where
providers like `{provide: X}` will be intepreted as `{provide: X, useClass: X}`. This pattern should
be documented in the migration guide.
PR Close#33960
Prior to this commit, there was a runtime check in i18n logic to make sure "other" case is always present in an ICU. That was not a requirement in View Engine, so ICUs that previously worked may produce errors. This commit removes that restriction and adds support for ICUs without "other" cases.
PR Close#34042
Move a view only if it would end up at a different place.
Otherwise we would do unnecessary processing like DOM manipulation, query notifications etc.
Thanks to @pkozlowski-opensource for the change.
PR Close#34052
When inserting a `viewRef` it is possible to not provide
an `index`, which is regarded as appending to the end of
the container.
If the `viewRef` already exists in the container, then
this results in a move. But there was a fault in the logic
that computed where to insert the `viewRef` that did not
account for the fact that the `viewRef` was already in
the container, so the insertion `index` was outside the
bounds of the array.
Fixes#33924
PR Close#34052
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
Previously if a type was returning itself it would cause an infinite loop in tsickle. We worked around it with a type that alises to `any`. Now that the issue has been resolved in tsickle, we can clean up the workaround.
PR Close#34019
When performing diagnostic checks or completions, we should take into
account members and properties in the base class, if any. Otherwise, the
language service will produce a false error.
PR closes https://github.com/angular/vscode-ng-language-service/issues/93
PR Close#34041
This commit fixes a compatibility bug where pre-order lifecycle
hooks (onInit, doCheck, OnChanges) for directives on the same
host node were executed based on the order the directives were
matched, rather than the order the directives were instantiated
(i.e. injection order).
This discrepancy can cause issues with forms, where it is common
to inject NgControl and try to extract its control property in
ngOnInit. As the NgControl directive is injected, it should be
instantiated before the control value accessor directive (and
thus its hooks should run first). This ensures that the NgControl
ngOnInit can set up the form control before the ngOnInit
for the control value accessor tries to access it.
Closes#32522
PR Close#34026
These apis have been deprecated in v8, so they should stick around till v10,
but since they are defunct we are removing them early so that they don't take up payload size.
PR Close#33949
In ViewEngine we were only generating code for exported classes, however with Ivy we do it no matter whether the class has been exported or not. These changes add an extra flag that allows consumers to opt into the ViewEngine behavior. The flag works by treating non-exported classes as if they're set to `jit: true`.
Fixes#33724.
PR Close#33921
At the end of the `integration/run_tests.sh` script, we check and upload
the payload sizes of UMD bundles in `dist/packages-dist/`. At some
point, we started sharding the integration tests on CI to speed the
overall build time. As a result, checking and uploading of UMD bundle
sizes was run multiple times (once per shard).
Given that the data is identical on each shard, the data was just
overwriting the previously uploaded data. Even if the end result is the
same, checking and uploading the data multiple times is wasteful.
This commit fixes `integration/run_tests.sh` to only check/upload UMD
bundle sizes on the 1st shard.
PR Close#33987
The change type was only recorded for `aio/` and was not correct anyway.
For example:
- It considered `package.json` changes as `application` (even if only
`package.json` and `yarn.lock` had changed).
- It failed to account for changes in `@angular/*` dependencies, when
using the locally built Angular packages (instead reporting them as
`other`).
- It only looked at the last commit, so it failed to provide accurate
information for multi-commit builds (which are rare, but possible).
For the above reasons (and because there is no straight-forward way of
fixing it), this commit removes the change type from the uploaded data.
If necessary, it is still possible to find the type of changes from the
uploaded info (e.g. extract the associated commits and look at their
changes using git).
PR Close#33987
As part of the `payload-size` npm script in `aio/package.json` (which is
run on CI), the sizes of the angular.io app bundles are checked to
ensure they do not exceed certain limits and are also uploaded to
Firebase to be available for later analysis. The uploaded data include
the type of the changes (dependencies only, application only, or both).
The type of changes is inferred by looking at the files that have
changed inside the `aio/` directory.
When the `payload-size.sh` script was first introduced, the only files
that could affect bundle sizes were inside the `aio/` directory.
Therefore, the script would skip uploading the data and checking the
sizes if no changes were detected inside the `aio/` directory.
However, this assumption stopped being valid over time. For example:
- We started tracking/checking bundle sizes when building the angular.io
app with the locally built Angular packages (which live outside the
`aio/` directory.
- Due to CircleCI limitations, the `CI_COMMIT_RANGE` environment
variable (which is used for determining what files have been affected)
stopped reflecting the whole commit range of the build and only
included the last commit instead.
Based on the above, there were many cases were size data would not be
uploaded to Firebase, even when they may have been affected (because the
affecting changes were outside `aio/` - e.g. in framework packages).
This makes it harder to analyze size regressions, because important
data-points are missing.
Even worse, in these cases, the sizes were not even checked against the
specified limits, thus making it possible for size regressions to go
unnoticed (unless caught by other similar tests).
This commit fixes the `scripts/ci/payload-size.sh` script to always
track and check payload sizes for angular.io bundles.
NOTE: This change will result in more data being recorded (i.e.
recording data when it is not possible for the bundle sizes to
have been affected by the changes). This is still preferable to
failing to record and/or check when sizes could have been
affected.
PR Close#33987
Micro-benchmarks were broken after we've introduced concept of
DECLARATION_COMPONENT_VIEW on LView (after this change embedded
views must have a pointer to a parent LView).
PR Close#34031
The root view case is already covered by the existing code in the
getRenderParent function so no need to have an explicit checks
(and associated memory reads) again.
PR Close#33988
We need to make is_ivy_enabled public to allow the internal i18n
build rule to rely on it rather than relying on compile_strategy.
After we move the internal i18n rule to rely on is_ivy_enabled,
compile_strategy can then be removed.
PR Close#33992
Previously, our incremental build system kept track of the changes between
the current compilation and the previous one, and used its knowledge of
inter-file dependencies to evaluate the impact of each change and emit the
right set of output files.
However, a problem arose if the compiler was not able to extract a
dependency graph successfully. This typically happens if the input program
contains errors. In this case the Angular analysis part of compilation is
never executed.
If a file changed in one of these failed builds, in the next build it
appears unchanged. This means that the compiler "forgets" to emit it!
To fix this problem, the compiler needs to know the set of changes made
_since the last successful build_, not simply since the last invocation.
This commit changes the incremental state system to much more explicitly
pass information from the previous to the next compilation, and in the
process to keep track of changes across multiple failed builds, until the
program can be analyzed successfully and the results of those changes
incorporated into the emit plan.
Fixes#32214
PR Close#33971
Previously the visible compiler name during the ng_module build action was
ngc/ngtsc. These names however are only really known to the compiler team.
Instead we should use more general terms for which compiler is used to match
how we speak about compiler choices.
PR Close#33995
This PR brings a couple of changes;
- Removes undeed dependencies in bazel targets such as `//packages/common` & `//packages/core`
- Removes RxJs usage
- Adds `document-register-element` to architect test targets
- Use @schematics/angular helpers
- Uses the standard `$source": "projectName"` to get the projectName, which is defined in the `schema.json`
- Use workspace writer to update the workspace config
PR Close#33723
Under bazel and Ivy we don't need the shim files to be emmited by default.
We still need to the shims for blaze however because google3 code imports them.
This improves build latency by 1-2 seconds per ng_module target.
PR Close#33765
The size diff threshold of 1% has proven to be too lenient for us
to catch size regressions in AIO. Since the AIO main bundle is
between 400-500 KB, a size regression must be between 4-5 KB before
it will cause the tests to fail. As a result, we may merge many
changes with smaller regressions of a few KB before the size test
eventually lets us know that the number has increased. The hope is
that lowering the threshold will help us catch the smaller
regressions during code review and prevent the size tests failing at
a random later time when someone catches the size "hot potato".
PR Close#33969
It will be easier to track regressions in size if fewer people
are approving size diffs in PRs. That way, we will have a few
people that have a fuller picture of where size changes are
coming from.
PR Close#33969
In efbbae5a4, the `publish_packages_as_artifacts` CircleCI job was
created to publish the build artifacts of PR builds on CI. In a8f4f14bd,
its scope was expanded to also publish build artifacts on non-PR builds.
The published artifacts names are constructed based on the PR number
(e.g. include `-pr12345-`), so on non-PR builds the names do not reflect
the source branch (instead, they include `-prfalse-`).
This commit fixes this by using the current branch name. For example,
artifact names for the `master` or `9.0.x` branch will include
`-master-` and `-9.0.x-` respectively (instead of `-prfalse-`).
(NOTE: For PRs, where branch name is `pull/12345`, the branch name is
transformed to `pr12345`.)
PR Close#33957
Before creating a mutating http request, service-worker
invalidates lru cache entry and writes to cache storage.
Therefore, cache storage failure can prevent making post requests.
Fix this by catching and logging cache error, add a test case.
Fixes#33793
PR Close#33930
In a package.json file, the "typings" or "types" field could be an array
of typings files. ngcc would previously crash unexpectedly for such
packages, as it assumed that the typings field would be a string. This
commit lets ngcc skip over such packages, as having multiple typing
entry-points is not supported for Angular packages so it is safe to
ignore them.
Fixes#33646
PR Close#33973
The url_tree equalQueryParams and containsQueryParam methods did not handle query params that has arrays, which resulted in the routerLinkActive to not behave as expected, change was made to ensure query params with arrays are handled correctly
fixes#22223
PR Close#22666
This introduces a second possible define flag for informing bazel to build with ivy, but
does not remove the old `compile=aot` flag for configuration.
This is the first step in migrating away from using the `compile=aot` define flag.
PR Close#33975
The assertion that we have in the `directiveInject` instruction is too restrictive and we came across some pattern where it throws unnecessarily. This commit removes that assertion for now and more detailed investigation is needed to decide is we need to restrict the set of TNodeType again.
This commit also adds a test which triggered the TNodeType.View to come up in the `directiveInject` instruction, so it might be useful to avoid regressions during further refactoring.
PR Close#33948
link to the correct section of the HttpClientGuide:
if someone searches for CSRF (and not XSRF), she will not find the right section in the HttpClient guide
added CSRF as name of XSRF attack:
in order to make it easier to find the XSRF protection, I've added a reference to the other name "CSRF". The security guide has the same reference to XSRF/CSRF.
When I searched for this feature, I had quite some problems to find it because of this missing reference
PR Close#32933
The search input has 50% width of the parent container in a focused
state for the big break point (> 1000px). In this case when window width
is between 1000px and 1115px the search input shrinks from 180 to
~123px. The width of the search input was increased to 80% so that when
focused its width expands from 180 to 196px when window size is 1000px.
Fixes#33305
PR Close#33804
In 5d5c94d83, the deprecated `versionedFiles` option from the SW
asset-group configuration in `ngsw-config.json`. As a result, the
option would be silently ignored and the runtime behavior of the SW
would change (i.e. some files might not be cached and available offline
any more). This change could be easily go unnoticed by the developer.
This commit ensures this does not happen by throwing a build-time error,
when detecting the unsupported `versionedFiles` option with an error
message prompting the user to use the `files` option instead.
Jira issue: [FW-1727](https://angular-team.atlassian.net/browse/FW-1727)
PR Close#33903
Recently the ngtsc translator was modified to be more `ScriptTarget`
aware, which basically means that it will not generate non-ES5 code
when the output format is ES5 or similar.
This commit enhances that change by also "downleveling" localized
messages. In ES2015 the messages use tagged template literals, which
are not available in ES5.
PR Close#33857
We have determined that the upload time cost of remote caching via http is too costly
to be effective for our distributed usage scenario. However this cost is still worth
it for us for Windows CI runs on a full cache hit move from a ~60 minute task to ~10
minutes.
It is worth noting that this remote http-caching is entirely separate from RBE caching
mechanisms.
PR Close#33907
Due to the fact that Tsickle runs between analyze and transform phases in Angular, Tsickle may transform nodes (add comments with type annotations for Closure) that we captured during the analyze phase. As a result, some patterns where a function is returned from another function may trigger automatic semicolon insertion, which breaks the code (makes functions return `undefined` instead of a function). In order to avoid the problem, this commit updates the code to wrap all functions in some expression ("privders" and "viewProviders") in parentheses. More info can be found in Tsickle source code here: d797426257/src/jsdoc_transformer.ts (L1021)
PR Close#33609
When ngtsc comes across a source file during partial evaluation, it
would determine all exported symbols from that module and evaluate their
values greedily. This greedy evaluation strategy introduces unnecessary
work and can fall into infinite recursion when the evaluation result of
an exported expression would circularly depend on the source file. This
would primarily occur in CommonJS code, where the `exports` variable can
be used to refer to an exported variable. This variable would be
resolved to the source file itself, thereby greedily evaluating all
exported symbols and thus ending up evaluating the `exports` variable
again. This variable would be resolved to the source file itself,
thereby greedily evaluating all exported symbols and thus ending u
evaluating the `exports` variable again. This variable would be
resolved to the source file itself, thereby greedily evaluating all
exported symbols and thus ending up evaluating the `exports` variable
again. This variable would be resolved to the source file itself,
thereby greedily evaluating all exported symbols and thus ending up
evaluating the `exports` variable again. This went on for some time
until all stack frames were exhausted.
This commit introduces a `ResolvedModule` that delays the evaluation of
its exports until they are actually requested. This avoids the circular
dependency when evaluating `exports`, thereby fixing the issue.
Fix#33734
PR Close#33772
The template type checker generates code to check directive inputs and
outputs, whose name may contain characters that can not be used as
identifier in TypeScript. Prior to this change, such names would be
emitted into the generated code as is, resulting in invalid code and
unexpected template type check errors.
This commit fixes the bug by representing the potentially invalid names
as string literal instead of raw identifier.
Fixes#33590
PR Close#33741
NgModule compilation in JIT mode (that is also used in TestBed) caches module scopes on NgModule defs (using `transitiveCompileScopes` field). Module overrides (defined via TestBed.overrideModule) may invalidate this data by adding/removing items in `declarations` list. This commit forces TestBed to recalculate transitive scopes in case module overrides are present, so TestBed always gets the most up-to-date information.
PR Close#33787
This change enables "var(--my-var)" to pass through the style sanitizer.
After consulation with our security team, allowing these doesn't create
new attack vectors, so the sanitizer doesn't need to strip them.
Fixes parts of #23485 related to the sanitizer, other use cases discussed
there related to binding have been addressed via other changes to the
class and style handling in the runtime.
Closes#23485
PR Close#33841
Previously, the generated StackBlitz examples as well as the
corresponding downloadable zips for the `http` guide examples were not
correct and thus trying to run the app and/or tests would fail.
This commit fixes the examples:
- Replace `TestBed.inject()` (which was [introduced in v9][1]) with
`TestBed.get()` (which is available in v8 used in the examples).
(NOTE: The examples will soon be updated to v9 (as part of
[FW-1609][2] and switched back to `TestBed.inject()` then.)
- Include `src/app/heroes/hero.ts` in the zip, because it is referenced
by some of the other files and the compilation fails without it.
- Ensure `src/main-specs.ts` is not included in the zip that does not
include the tests. Including the file broke the app, because there is
logic in our zip-builder that renamed `main-*.ts` files to `main.ts`
and thus `main-specs.ts` ended up overwriting the actual `main.ts`.
[1]: https://next.angular.io/guide/deprecations#angularcoretesting
[2]: https://angular-team.atlassian.net/browse/FW-1609Fixes#33874Fixes#33945
PR Close#33941
This commit transforms the setClassMetadata calls generated by ngtsc from:
```typescript
/*@__PURE__*/ setClassMetadata(...);
```
to:
```typescript
/*@__PURE__*/ (function() {
setClassMetadata(...);
})();
```
Without the IIFE, terser won't remove these function calls because the
function calls have arguments that themselves are function calls or other
impure expressions. In order to make the whole block be DCE-ed by terser,
we wrap it into IIFE and mark the IIFE as pure.
It should be noted that this change doesn't have any impact on CLI* with
build-optimizer, which removes the whole setClassMetadata block within
the webpack loader, so terser or webpack itself don't get to see it at
all. This is done to prevent cross-chunk retention issues caused by
webpack's internal module registry.
* actually we do expect a short-term size regression while
https://github.com/angular/angular-cli/pull/16228
is merged and released in the next rc of the CLI. But long term this
change does nothing to CLI + build-optimizer configuration and is done
primarly to correct the seemingly correct but non-function PURE annotation
that builds not using build-optimizer could rely on.
PR Close#33337
NgModules in Ivy have a definition which contains various different bits
of metadata about the module. In particular, this metadata falls into two
categories:
* metadata required to use the module at runtime (for bootstrapping, etc)
in AOT-only applications.
* metadata required to depend on the module from a JIT-compiled app.
The latter metadata consists of the module's declarations, imports, and
exports. To support JIT usage, this metadata must be included in the
generated code, especially if that code is shipped to NPM. However, because
this metadata preserves the entire NgModule graph (references to all
directives and components in the app), it needs to be removed during
optimization for AOT-only builds.
Previously, this was done with a clever design:
1. The extra metadata was added by a function called `setNgModuleScope`.
A call to this function was generated after each NgModule.
2. This function call was marked as "pure" with a comment and used
`noSideEffects` internally, which causes optimizers to remove it.
The effect was that in dev mode or test mode (which use JIT), no optimizer
runs and the full NgModule metadata was available at runtime. But in
production (presumably AOT) builds, the optimizer runs and removes the JIT-
specific metadata.
However, there are cases where apps that want to use JIT in production, and
still make an optimized build. In this case, the JIT-specific metadata would
be erroneously removed. This commit solves that problem by adding an
`ngJitMode` global variable which guards all `setNgModuleScope` calls. An
optimizer can be configured to statically define this global to be `false`
for AOT-only builds, causing the extra metadata to be stripped.
A configuration for Terser used by the CLI is provided in `tooling.ts` which
sets `ngJitMode` to `false` when building AOT apps.
PR Close#33671
The Ivy template type-checker is capable of inferring the type of a
structural directive (such as NgForOf<T>). Previously, this was done with
fullTemplateTypeCheck: true, even if strictTemplates was false. View Engine
previously did not do this inference, and so this causes breakages if the
type of the template context is not what the user expected.
In particular, consider the template:
```html
<div *ngFor="let user of users as all">
{{user.index}} out of {{all.length}}
</div>
```
As long as `users` is an array, this seems reasonable, because it appears
that `all` is an alias for the `users` array. However, this is misleading.
In reality, `NgForOf` is rendered with a template context that contains
both a `$implicit` value (for the loop variable `user`) as well as a
`ngForOf` value, which is the actual value assigned to `all`. The type of
`NgForOf`'s template context is `NgForContext<T>`, which declares `ngForOf`'s
type to be `NgIterable<T>`, which does not have a `length` property (due to
its incorporation of the `Iterable` type).
This commit stops the template type-checker from inferring template context
types unless strictTemplates is set (and strictInputTypes is not disabled).
Fixes#33527.
PR Close#33537
This commit changes the reporting of watch mode diagnostics for ngtsc to use
the same formatting as non-watch mode diagnostics. This prints rich and
contextual errors even in watch mode, which previously was not the case.
Fixes#32213
PR Close#33862
Previously, the ngtsc compiler attempted to reuse analysis work from the
previous program during an incremental build. To do this, it had to prove
that the work was safe to reuse - that no changes made to the new program
would invalidate the previous analysis.
The implementation of this had a significant design flaw: if the previous
program had errors, the previous analysis would be missing significant
information, and the dependency graph extracted from it would not be
sufficient to determine which files should be re-analyzed to fill in the
gaps. This often meant that the build output after an error was resolved
would be wholly incorrect.
This commit switches ngtsc to take a simpler approach to incremental
rebuilds. Instead of attempting to reuse prior analysis work, the entire
program is re-analyzed with each compilation. This is actually not as
expensive as one might imagine - analysis is a fairly small part of overall
compilation time.
Based on the dependency graph extracted during this analysis, the compiler
then can make accurate decisions on whether to emit specific files. A new
suite of tests is added to validate behavior in the presence of source code
level errors.
This new approach is dramatically simpler than the previous algorithm, and
should always produce correct results for a semantically correct program.s
Fixes#32388Fixes#32214
PR Close#33862
By clearing `sessionStorage` and unsubscribing from `Location` events,
after each test, we reduce the possibility of potential
[spooky action at a distance][1]-type of failures in the future.
This does not have an impact on the actual app, since `ScrollService` is
currently expected to live throughout the lifetime of the app. Still,
unsubscribing from `Location` events keeps the code consistent with how
other `ScrollService` listeners are handled (e.g. for `window` events).
[1]: https://en.wikipedia.org/wiki/Action_at_a_distance_(computer_programming)
PR Close#33937
`ScrollService` subscribes to global `window` events and mutates global
state in the listener (e.g. read/write values from/to `sessionStorage`).
Therefore, we need to always call its `ngOnDestroy()` method to
unsubscribe from these events after each test.
In f69c6e204, a new testcase was introduced that was not destroyed. As a
result, random failures started to randomly happen in other, unrelated
tests ([example CI failure][1]).
This commit fixes this by ensuring all `ScrollService` instances are
destroyed after each tests (provided that they are created with the
`createScrollService()` helper).
[1]: https://circleci.com/gh/angular/angular/533298
PR Close#33937
This adds a `tools/ng_rollup_bundle/terser_config.json` file to override the default terser_minified config provided by the rule. After this change, the layer violation in rules_nodejs can be fixed by removing `"global_defs": {"ngDevMode": false, "ngI18nClosureMode": false},` from `terser_config.default.json` in rules_nodejs.
Change requested by Alex Rickabaugh in https://github.com/bazelbuild/rules_nodejs/pull/1338.
PR Close#33865
Originally, QueryList implemented Iterable and provided a Symbol.iterator
on its prototype. This caused issues with tree-shaking, so QueryList was
refactored and the Symbol.iterator added in its constructor instead. As
part of this change, QueryList no longer implemented Iterable directly.
Unfortunately, this meant that QueryList was no longer assignable to
Iterable or, consequently, NgIterable. NgIterable is used for NgFor's input,
so this meant that QueryList was not usable (in a type sense) for NgFor
iteration. View Engine's template type checking would not catch this, but
Ivy's did.
As a fix, this commit adds the declaration (but not the implementation) of
the Symbol.iterator function back to QueryList. This has no runtime effect,
so it doesn't affect tree-shaking of QueryList, but it ensures that
QueryList is assignable to NgIterable and thus usable with NgFor.
Fixes#29842
PR Close#33536
Previously, the compiler assumed that all TS files logically within a
project existed under one or more "root directories". If the TS compiler
option `rootDir` or `rootDirs` was set, they would dictate the root
directories in use, otherwise the current directory was used.
Unfortunately this assumption was unfounded - it's common for projects
without explicit `rootDirs` to import from files outside the current
working directory. In such cases the `LogicalProjectStrategy` would attempt
to generate imports into those files, and fail. This would lead to no
`ReferenceEmitStrategy` being able to generate an import, and end in a
compiler assertion failure.
This commit introduces a new strategy to use when there are no `rootDirs`
explicitly present, the `RelativePathStrategy`. It uses simpler, filesystem-
relative paths to generate imports, even to files above the current working
directory.
Fixes#33659Fixes#33562
PR Close#33828
This commit adds the ability to change directories using the compiler's
internal filesystem abstraction. This is a prerequisite for writing tests
which are sensitive to the current working directory.
In addition to supporting the `chdir()` operation, this commit also fixes
`getDefaultLibLocation()` for mock filesystems to not assume `node_modules`
is in the current directory, but to resolve it similarly to how Node does
by progressively looking higher in the directory tree.
PR Close#33828
TNode.inputs are initialised during directives resolution now so we know early
if a node has directives with inputs or no. We don't need to use undefined value
as an indicator that inputs were not resolved yet.
PR Close#33798
Before this change a public name of a directive's input
was stored in 2 places:
- as a key of an object on TNode.index;
- as a value of PropertyAliasValue at the index 1
This PR changes the data structure so the public name is stored
only once as a key on TNode.index. This saves one array entry
for each and every directive input.
PR Close#33798
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
Whenever cookies are disabled in the browser, `window.sessionStorage` is not avaialable to the app (i.e. even trying to access `window.sessionStorage` throws an error).
To avoid breaking the app, we use a no-op `Storage` implementation if `window.sessionStorage` is not available.
Fixes#33795
PR Close#33829
This refactorings clearly separates the first and subsequent creation execution
of the `template` instruction. This approach has the following benefits:
- it is clear what happens during the first vs. subsequent executions;
- we can avoid several memory reads and checks after the first creation pass
(there is measurable performance improvement on various benchmarks);
- the template instructions becomes smaller and should become a candidate
for optimisations / inlining faster;
PR Close#33856
Since `scripts/package-builder.js` gets run from the
`aio` folder sometimes, it is important to set the cwd
for the command that finds the bazel bin directory.
PR Close#33904
The ReflectionHost supports enumeration of constructor parameters, and one
piece of information it returns describes the origin of the parameter's
type. Parameter types come in two flavors: local (the type is not imported
from anywhere) or non-local (the type comes via an import).
ngcc incorrectly classified all type parameters as 'local', because in the
source files that ngcc processes the type parameter is a real ts.Identifer.
However, that identifier may still have come from an import and thus might
be non-local.
This commit changes ngcc's ReflectionHost(s) to properly recognize and
report these non-local type references.
Fixes#33677
PR Close#33901
`ng_package` rule has an implicitly optional depedency on terser a48573efe8/packages/bazel/src/ng_package/ng_package.bzl (L36)
When using this rule without terser being available we get the below error;
```
ERROR: /home/circleci/ng/modules/express-engine/BUILD.bazel:22:1: every rule of type ng_package implicitly depends upon the target '@npm//terser/bin:terser', but this target could not be found because of: no such package '@npm//terser/bin': BUILD file not found in directory 'terser/bin' of external repository @npm. Add a BUILD file to a directory to mark it as a package.
ERROR: Analysis of target '//modules/express-engine:npm_package' failed; build aborted: no such package '@npm//terser/bin': BUILD file not found in directory 'terser/bin' of external repository @npm. Add a BUILD file to a directory to mark it as a package.
```
PR Close#33891
Since i18n messages are mapped to `$localize` tagged template strings,
the "raw" version must be properly escaped. Otherwise TS will throw an
error such as:
```
Error: Debug Failure. False expression: Expected argument 'text' to be the normalized (i.e. 'cooked') version of argument 'rawText'.
```
This commit ensures that we properly escape these raw strings before creating
TS AST nodes from them.
PR Close#33820
The `:` char is used as a metadata marker in `$localize` messages.
If this char appears in the metadata it must be escaped, as `\:`.
Previously, although the `:` char was being escaped, the TS AST
being generated was not correct and so it was being output double
escaped, which meant that it appeared in the rendered message.
As of TS 3.6.2 the "raw" string can be specified when creating tagged
template AST nodes, so it is possible to correct this.
PR Close#33820
When asking for a ViewContainerRef on <ng-container> we do reuse <ng-container> comment
node as a LContainer's anachor. Before this fix the act of re-using a <ng-container>'s
comment node would result in this comment node being re-appended to the DOM in the wrong
place. With the fix in this PR we make sure that re-using <ng-container>'s comment node
doesn't result in unwanted DOM manipulation (ng-gontainer's comment node is already part
of the DOM and doesn't have to be re-created / re-appended).
PR Close#33816
In View Engine, providers which neither used `useValue`, `useClass`,
`useFactory` or `useExisting`, were interpreted differently.
e.g.
```
{provide: X} -> {provide: X, useValue: undefined}, // this is how it works in View Engine
{provide: X} -> {provide: X, useClass: X}, // this is how it works in Ivy
```
The missing-injectable migration should migrate such providers to the
explicit `useValue` provider. This ensures that there is no unexpected
behavioral change when updating to v9.
PR Close#33709
Fixes issue introduced in https://github.com/angular/angular/pull/33808 for ng_rollup_bundle with `-spawn_strategy=standalone`. Without the sandbox (if --spawn_strategy=standalone is set) rollup can resolve to the non-esm .js file generated by ts_library instead of the desired .mjs. This fixes the problem by prioritizing .mjs.
Issue observed is of the flavor:
```
ERROR: modules/benchmarks/src/views/BUILD.bazel:20:1: Bundling JavaScript modules/benchmarks/src/views/bundle.es2015.js
[rollup] failed (Exit 1)
[!] Error: 'enableProdMode' is not exported by bazel-out/darwin-fastbuild/bin/packages/core/index.js
https://rollupjs.org/guide/en/#error-name-is-not-exported-by-module
bazel-out/darwin-fastbuild/bin/modules/benchmarks/src/views/index.mjs (12:9)
10: * found in the LICENSE file at https://angular.io/license
11: */
12: import { enableProdMode } from '@angular/core';
^
13: import { platformBrowser } from '@angular/platform-browser';
14: import { ViewsBenchmarkModuleNgFactory } from './views-benchmark.ngfactory';
Error: 'enableProdMode' is not exported by bazel-out/darwin-fastbuild/bin/packages/core/index.js
```
PR Close#33867
In #32902 a bug was supposedly fixed where internal classes as used
within `ModuleWithProviders` are publicly exported, even when the
typings file already contained the generic type on the
`ModuleWithProviders`. This fix turns out to have been incomplete, as
the `ModuleWithProviders` analysis is not done when not processing the
typings files.
The effect of this bug is that formats that are processed after the
initial format had been processed would not have exports for internal
symbols, resulting in "export '...' was not found in '...'" errors.
This commit fixes the bug by always running the `ModuleWithProviders`
analyzer. An integration test has been added that would fail prior to
this change.
Fixes#33701
PR Close#33875
ngcc has a basic integration test infrastructure that downlevels
TypeScript code into bundle formats that need to be processed by ngcc.
Until now, only ES5 bundles were created with a flat structure, however
more complex scenarios require an APF-like layout containing multiple
bundle formats.
PR Close#33875
Some declaration files may not be referenced from an entry-point's
main typings file, as it may declare types that are only used internally.
ngcc has logic to include declaration files based on all source files,
to ensure internal declaration files are available.
For packages following APF layout, however, this logic was insufficient.
Consider an entry-point with base path of `/esm2015/testing` and typings
residing in `/testing`, the file
`/esm2015/testing/src/nested/internal.js` has its typings file at
`/testing/src/nested/internal.d.ts`. Previously, the declaration was
assumed to be located at `/esm2015/testing/testing/internal.d.ts` (by
means of `/esm2015/testing/src/nested/../../testing/internal.d.ts`)
which is not where the declaration file can be found. This commit
resolves the issue by looking in the correct directory.
PR Close#33875
By adding the `bash` language to the code snippet it will no
longer be auto-linked, which was causing a false positive link
to be rendered.
Fixes#33859
PR Close#33877
Previously any code block, which was not marked with
`no-auto-link` css class would have its contents auto-linked to
API pages. Sometimes this results in false positive links being
generated.
This is problematic for triple backticked blocks, which cannot provide
the `no-auto-link` CSS class to prevent the linking.
This commit fixes the problem by allowing the auto-linker to be
configured not to auto-link code blocks that have been marked with an
"ignored" language. By default these are `bash` and `json`.
Triple backticked blocks are able to specify the language directly after
the first set of triple backticks.
Fixes#33859
PR Close#33877
In flat bundle formats, multiple classes that have the same name can be
suffixed to become unique. In ES5-like bundles this results in the outer
declaration from having a different name from the "implementation"
declaration within the class' IIFE, as the implementation declaration
may not have been suffixed.
As an example, the following code would fail to have a `Directive`
decorator as ngcc would search for `__decorate` calls that refer to
`AliasedDirective$1` by name, whereas the `__decorate` call actually
uses the `AliasedDirective` name.
```javascript
var AliasedDirective$1 = /** @class */ (function () {
function AliasedDirective() {}
AliasedDirective = tslib_1.__decorate([
Directive({ selector: '[someDirective]' }),
], AliasedDirective);
return AliasedDirective;
}());
```
This commit fixes the problem by not relying on comparing names, but
instead finding the declaration and matching it with both the outer
and inner declaration.
PR Close#33878
Previously, indexing a container type would not return completions for
the indexed type because for every TypeScript type, the recorded index
type was always marked as `undefined`, regardless of the index
signature.
This PR now returns the index type of TypeScript containers with numeric
or string index signatures. This allows use to generate completions for
arrays and defined index types:
```typescript
interface Container<T> {
[key: string]: T;
}
const ctr: Container<T>;
ctr['stringKey']. // gives `T.` completions
const arr: T[];
arr[0]. // gives `T.` completions
```
Note that this does _not_ provide completions for properties indexed by
string literals, e.g.
```typescript
interface Container<T> {
foo: T;
}
const ctr: Container<T>;
ctr['foo']. // does not give `T.` completions
```
Closes angular/vscode-ng-language-service#110
Closes angular/vscode-ng-language-service#277
PR Close#33775
This fixes an issue bundling es2015 with ng_rollup_bundle that was covered up by a typo when refactoring ng_rollup_bundle to not use legacy rollup_bundle internals and to use the new terser_minified rule and npm_package_bin to call brotli.
Note: ng_rollup_bundle is only used in the angular repo and not externally so this issue does not affect users
PR Close#33808
In ccc76f749, `@angular/platform-webworker` and
`@angular/platform-webworker-dynamic` were deprecated (i.e. by
deprecating all their public APIs). However, some public
`@angular/platform-webworker` APIs were accidentally missed,
additionally resulting in the package itself not showing up as
deprecated on angular.io.
This commit fixes it by marking those remaining public APIs as
deprecated.
PR Close#33824
This commit fixes a bug whereby completions for attribute values are only
provided for directives that support the micro-syntax format, all other
bindings are ignored.
I'm not sure if this is a regresssion or a bug, because there were no
tests prior to this.
PR Close#33839
In #33823, `scripts/package-builds.sh` (which is used by both
`build-packages-dist.sh` and `build-ivy-npm-packages.sh`) was updated to
use `realpath`. It turns out that `realpath` does not exist on macOS, so
the build scripts do not work there.
In order to fix this (and also reduce the likelihood of introducing
similar issues in the future), this commit changes these bash scripts to
Node.js scripts (using [ShellJS](https://github.com/shelljs/shelljs) for
a cross-platform implementation of Unix shell commands where necessary).
PR Close#33854
This adds a `tools/ng_rollup_bundle/terser_config.json` file to override the default terser_minified config provided by the rule. After this change, the layer violation in rules_nodejs can be fixed by removing `"global_defs": {"ngDevMode": false, "ngI18nClosureMode": false},` from `terser_config.default.json` in rules_nodejs.
Change requested by Alex Rickabaugh in https://github.com/bazelbuild/rules_nodejs/pull/1338.
PR Close#33773
The earlier update to nodejs rules 0.40.0 fixes the cross-platform RBE issues with nodejs_binary. This commit adds a work-around for rules_webtesting cross-platform RBE issues.
PR Close#33708
This commit fixes a few issues with helper method
`getBuiltInTypeFromTsType`.
1. The function is wrongly named. It should be the other way round.
2. The ts.Type returned by the function should not contain any value.
This is because for some data types like Number and String, the
SourceFile (context.node) is not the correct value. Value is never
needed for program correctness in this case.
PR Close#33778
This commit fixes a bug brought up by @andrius-pra whereby the language
service host would recompute the analyzed modules even when none of the
source files changes. This is due to a bug in our unit test that
precludes non-TS files from incrementing the project version.
Consequently, when the external template is updated, the program remains
the same.
With the bug fixed, the next step is to figure out if any source files
have been added / changed / removed since the last computation. The
previously analyzed could be safely retained only when none of these
operations happen.
PR Close#33806
The method `getTemplateReferences()` appears in both the LanguageService
interface and LanguageServiceHost interface. It should belong in the
latter and not the former, since the former deals with the semantics of
the language and not the mechanics.
PR Close#33807
If the application is not running directly in the browser, e.g.
universal or app-shell, then the `$localize` import must be
adding to a different file than for normal browser applications.
This commit adds more information about this to avoid any
confusion.
// FW-1557
PR Close#33826
Now that terser_minified supports args as of nodejs rules 0.40.0, ng_rollup_bundle can updated to the pass —comments /a^/ to args can turn off all comments and maintain the current ng_rollup_bundle behavior with the latest version fo terser. //packages/core/test/bundling/todo:bundle.min.js size test passes with this fix.
Tho not strictly necessary to update terser, this will be a rough edge when someone does try it as it is not obvious why the //packages/core/test/bundling/todo:bundle.min.js size test fails. Updating now should save time in the future by not hitting this issue.\
This change also affect ng_package output as the default comments that are preserved by terser are now Comments with @preserve, @license, @cc_on as well as comments starting with /*! and /**! are now preserved by default.. (https://github.com/terser/terser/blob/master/CHANGELOG.md). Example ng_package golden file also updated as there are not some /*! comments preserved that were in older versions of terser.
PR Close#33835
In #33823, `scripts/package-builds.sh` (which is used by both
`build-packages-dist.sh` and `build-ivy-npm-packages.sh`) was updated to
use `realpath`. It turns out that `realpath` does not exist on macOS, so
the build scripts do not work there.
This commit fixes it by switching from `realpath $(pwd)/..` to
`dirname $(pwd)`, which does practically the same thing (in this
situation) and works on macOS as well.
PR Close#33843
Angular `9.0.0-rc.2` contains an update of CLDR data to `v36.0.0`. The localized data changed for some locales, and this is breaking tests that are checking the result of i18n applications. For example, the space separator used in numbers changed from `\xa0` to `\u202f`.
This commit adds a mention to this change in the release notes, so developers can more easily understand why some of their tests are failing when updating to v9.
PR Close#33848
Prior to this commit the assert that we have in `directiveInject` (assert introduced recently) didn't include IcuContainer TNode type and as a result, the error is thrown in case pipes with dependencies are used inside ICUs. This commit extends the assert to allow for IcuContainer TNode types.
PR Close#33832
This commit moves the `setLContainerActiveIndex` and `getLContainerActiveIndex` functions used in a few files to a common `util/view_util.ts` lib to avoid cyclical dependency while importing `instructions/container.ts` where these functions located originally.
PR Close#33831
The ng-add schematic for `@angular/bazel` should set up
the latest Bazel version v1.1.0 that contains fixes for
windows. e.g. 618e5a28f7
PR Close#33813
Updates Bazel to the latest stable version. Bazel 1.1.0
supposedly fixes a permission bug in Windows. Hence we
should try to update and see if that fixes the bug.
It's generally good to be up to date. See potential bug
fix commit:
618e5a28f7.
PR Close#33813
- Move "Building packages" log above actual work (computing targets).
- Print corrent script name (`build-ivy-npm-packages.sh` would claim to
be `build-packages-dist.sh`).
- Make logs of different operations a little more consistent.
PR Close#33823
The following files are consumed only by the language service and do not
have to be in compiler-cli:
1. expression_diagnostics.ts
2. expression_type.ts
3. typescript_symbols.ts
4. symbols.ts
PR Close#33809
Reference #33259
Removes figures elements as AIO is not typically using captions or image groups where figures would be necessary or appropriate
PR Close#33748
`<div class="hero-list" *ngIf="heroes else loading">` defines `heroes` as condition, but `hero-list` is used as condition in the transformed code `<ng-template [ngIf]="heroes" [ngIfElse]="loading">`.
PR Close#33425
The url_tree equalQueryParams and containsQueryParam methods did not handle query params that has arrays, which resulted in the routerLinkActive to not behave as expected, change was made to ensure query params with arrays are handled correctly
fixes#22223
PR Close#22666
Previously, ngcc's `Renderer` would add some constants in the processed
files which were emitted as ES2015 code (e.g. `const` declarations).
This would result in invalid ES5 generated code that would break when
run on browsers that do not support the emitted format.
This commit fixes it by adding a `printStatement()` method to
`RenderingFormatter`, which can convert statements to JavaScript code in
a suitable format for the corresponding `RenderingFormatter`.
Additionally, the `translateExpression()` and `translateStatement()`
ngtsc helper methods are augmented to accept an extra hint to know
whether the code needs to be translated to ES5 format or not.
Fixes#32665
PR Close#33514
While processing class metadata, ngtsc generates a `setClassMetadata()`
call which (among other things) contains info about property decorators.
Previously, processing getter/setter pairs with some of ngcc's
`ReflectionHost`s resulted in multiple metadata entries for the same
property, which resulted in duplicate object keys, which in turn causes
an error in ES5 strict mode.
This commit fixes it by ensuring that there are no duplicate property
names in the `setClassMetadata()` calls.
In addition, `generateSetClassMetadataCall()` is updated to treat
`ClassMember#decorators: []` the same as `ClassMember.decorators: null`
(i.e. omitting the `ClassMember` from the generated `setClassMetadata()`
call). Alternatively, ngcc's `ReflectionHost`s could be updated to do
this transformation (`decorators: []` --> `decorators: null`) when
reflecting on class members, but this would require changes in many
places and be less future-proof.
For example, given a class such as:
```ts
class Foo {
@Input() get bar() { return 'bar'; }
set bar(value: any) {}
}
```
...previously the generated `setClassMetadata()` call would look like:
```ts
ɵsetClassMetadata(..., {
bar: [{type: Input}],
bar: [],
});
```
The same class will now result in a call like:
```ts
ɵsetClassMetadata(..., {
bar: [{type: Input}],
});
```
Fixes#30569
PR Close#33514
Previously, due to a bug a `Context` with `isStatement: false` could be
returned in places where a `Context` with `isStatement: true` was
requested. As a result, some statements would be unnecessarily wrapped
in parenthesis.
This commit fixes the bug in `Context#withStatementMode` to always
return a `Context` with the correct `isStatement` value. Note that this
does not have any impact on the generated code other than avoiding some
superfluous parenthesis on certain statements.
PR Close#33514
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
This is a breaking change in nodejs rules 0.40.0 as part of the API review & cleanup for the 1.0 release. Their APIs are identical as ts_web_test was just karma_web_test without the config_file attribute.
PR Close#33802
In f78bda9ff, recommended configuration files were added to be used as
basis for setting up [Remote Development using docker containers][1] in
VSCode. Apparently, I had forgotten to commit the corresponding
`README.md` file.
This commit adds `.devcontainer/README.md` with more info on Remote
Development in VSCode.
[1]: https://code.visualstudio.com/docs/remote/containers
PR Close#33790
In order to speed up bazel build performance delete all rxjs d.ts files
that reference rxjs-compat.
For all ts_library and ng_module rules Bazel generates tsconfig.json file
that explicitly lists all d.ts files found in required npm package.
In case of rxjs, this means that tsconfig contains all d.ts files that
reference rxjs-compat package, which is an interop/backwards compatibility
package not installed in angular/angular repo.
But because tsconfig contains these d.ts files, tsc will try to resolve
them and silently fail. All these lookups are quite expensive and not
cached. This causes significant slowdown of the build under bazel.
This change removes all of these problematic rxjs d.ts files via an npm
postinstall hook. This is not ideal because it solves the problem only
for our repo, but it's a good start.
Build perf improvements per target:
//packages/core/src/reflect:reflect 5sec => 3 sec
//packages/core:core 17sec => 12 sec
//packages/router:router 30sec => 8 sec
PR Close#33786
Prior to this change, setting style prop value to undefined or empty string would not result in resetting prop value in case the style prop is defined using [style.prop.px] syntax. The problem is that the check for empty value (and thus reseting the value) considered successful only in case of `null` value. This commit updates the check to use `isStylingValueDefined` function that also checks for undefined and empty string.
PR Close#33780
The reflection hosts have been updated to support the following
code forms, which were found in some minified library code:
* The class IIFE not being wrapped in parentheses.
* Calls to `__decorate()` being combined with the IIFE return statement.
PR Close#33777
Previously we only removed `__decorate()` calls that looked like:
```
SomeClass = __decorate(...);
```
But in some minified scenarios this call gets wrapped up with the
return statement of the IIFE.
```
return SomeClass = __decorate(...);
```
This is now removed also, leaving just the return statement:
```
return SomeClass;
```
PR Close#33777
The `dist/` directory has a duplicate `package.json` pointing to the
same files, which (under certain configurations) can causes ngcc to try
to process the files twice and fail.
This commit adds a default ngcc config for `ng2-dragula` to ignore the
`dist/` entry-point.
Fixes#33718
PR Close#33797
Prior to this change, ComponentFactory.create function invocation in Ivy retained the content of the host element (in case host element reference or CSS seelctor is provided as an argument). This behavior is different in View Engine, where the content of the host element was cleared, except for the case when ShadowDom encapsulation is used (to make sure native slot projection works). This commit aligns Ivy and View Engine and makes sure the host element is cleared before component content insertion.
PR Close#33487
During incremental compilations, ngtsc needs to know which metadata
from a previous compilation can be reused, versus which metadata has to
be recomputed as some dependency was updated. Changes to
directives/components should cause the NgModule in which they are
declared to be recompiled, as the NgModule's compilation is dependent
on its directives/components.
When a dependent source file of a directive/component is updated,
however, a more subtle dependency should also cause to NgModule's source
file to be invalidated. During the reconciliation of state from a
previous compilation into the new program, the component's source file
is invalidated because one of its dependency has changed, ergo the
NgModule needs to be invalidated as well. Up until now, this implicit
dependency was not imposed on the NgModule. Additionally, any change to
a dependent file may influence the module scope to change, so all
components within the module must be invalidated as well.
This commit fixes the bug by introducing additional file dependencies,
as to ensure a proper rebuild of the module scope and its components.
Fixes#32416
PR Close#33522
When the Angular compiler is operated through the ngc binary in watch
mode, changing a template in an external file would not cause the
component to be recompiled if Ivy is enabled.
There was a problem with how a cached compiler host was present that was
unaware of the changed resources, therefore failing to trigger a
recompilation of a component whenever its template changes. This commit
fixes the issue by ensuring that information about modified resources is
correctly available to the cached compiler host.
Fixes#32869
PR Close#33551
The `ngInjectableDef` property was renamed to `ɵprov`, but core must
still support both because there are published libraries that use the
older term.
We are only interested in such properties that are defined directly on
the type being injected, not on base classes. So there is a check that
the defintion is specifically for the given type.
Previously if you tried to inject a class that had `ngInjectableDef` but
also inherited `ɵprov` then the check would fail on the `ɵprov` property
and never even try the `ngInjectableDef` property resulting in a failed
injection.
This commit fixes this by attempting to find each of the properties
independently.
Fixes https://github.com/angular/ngcc-validation/pull/526
PR Close#33732
Chains multiple listener instructions on a particular element into a single call which results in less generated code. Also handles listeners on templates, host listeners and synthetic host listeners.
PR Close#33720
Since #33321, Angular packages have been persisted on each build as
CircleCI build artifacts (`.tgz` files), which can be used to install
dependencies on a project (for the purpose of testing or trying out a
change before a PR being merged and without having to build the packages
from source locally).
Previously, only packages published to npm under the `@angular` scope
were persisted as build artifacts.
This commit adds the `zone.js` package to the list of persisted
packages.
Fixes#33686
PR Close#33733
In #33046, internal uses of `zone.js` were switched to reference it
directly from source (built with Bazel) instead of npm. As a result, the
necessary scripts were updated to build `zone.js` as necessary. However,
some `integration/**/debug-test.sh` scripts were missed (apparently
because they are not used on CI, but only locally as helpers for
debugging the integration projects).
This commit updates the `scripts/build-packages-dist.sh` script to also
build `zone.js`, so that other scripts (such as the various
`debug-test.sh` scripts) can use it.
PR Close#33733
switching to cldr-data package resulted in
loss of some locales, since by default only core locales are loaded.
This PR adds a flag to tell cldr-data to use full locale coverage
fixes: #33681
PR Close#33682
Most of the use of `document` in the framework is within
the DI so they just inject the `DOCUMENT` token and are done.
Ivy is special because it does not rely upon the DI and must
get hold of the document some other way. There are a limited
number of places relevant to ivy that currently consume a global
document object.
The solution is modelled on the `LOCALE_ID` approach, which has
`getLocaleId()` and `setLocaleId()` top-level functions for ivy (see
`core/src/render3/i18n.ts`). In the rest of Angular (i.e. using DI) the
`LOCALE_ID` token has a provider that also calls setLocaleId() to
ensure that ivy has the same value.
This commit defines `getDocument()` and `setDocument() `top-level
functions for ivy. Wherever ivy needs the global `document`, it calls
`getDocument()` instead. Each of the platforms (e.g. Browser, Server,
WebWorker) have providers for `DOCUMENT`. In each of those providers
they also call `setDocument()` accordingly.
Fixes#33651
PR Close#33712
It looks like there was a typo when it originally was
written. As it works right now, the `beforeEach` and
`afterEach` cancel each other out. But then
`ensureDocument()` is called anyway in the `withBody()`
function.
With this change there is no need to call `ensureDocument() in the
`withBody() function.
PR Close#33712
Previously the renderers were fixed so that they inserted extra
"adjacent" statements after the last static property of classes.
In order to help the build-optimizer (in Angular CLI) to be able to
tree-shake classes effectively, these statements should also appear
after any helper calls, such as `__decorate()`.
This commit moves the computation of this positioning into the
`NgccReflectionHost` via the `getEndOfClass()` method, which
returns the last statement that is related to the class.
FW-1668
PR Close#33689
While overriding providers in Ivy TestBed (via TestBed.overrideProvider call), the old providers were retained in the list, since the override takes precedence. However, presence of providers in the list might have side-effect: if a provider has the `ngOnDestroy` lifecycle hook, this hook will be registered and invoked later (when component is destroyed). This commit updates TestBed logic to clear provider list by removing the ones which have overrides.
PR Close#33706
Updates the commit we run the `material-unit-tests` job
against. The latest commit includes 1255139a38
This commit reduces the flakiness of a `MatMenu` test and therefore
improves the stability of the material-unit-tests job.
Example failing build: https://circleci.com/gh/angular/angular/521625
PR Close#33716
This commit removes one of the expected Ivy changes because we have
decided to change the behavior to be more backwards-compatible.
It also adds a bug fix that is technically breaking to the list of
expected changes.
PR Close#33675
Similar to https://github.com/angular/angular/pull/33633, this commit is
needed to fix an outage with the Angular Kythe indexer.
Crash logs:
```
TypeError: Cannot read property 'text' of undefined
at NodeObject.getFullText (typescript/stable/lib/typescript.js:121443:57)
at FactoryGenerator.generate (angular2/rc/packages/compiler-cli/src/ngtsc/shims/src/factory_generator.ts:67:34)
at GeneratedShimsHostWrapper.getSourceFile (angular2/rc/packages/compiler-cli/src/ngtsc/shims/src/host.ts:88:26)
at findSourceFile (typescript/stable/lib/typescript.js:90654:29)
at typescript/stable/lib/typescript.js:90553:85
at getSourceFileFromReferenceWorker (typescript/stable/lib/typescript.js:90520:34)
at processSourceFile (typescript/stable/lib/typescript.js:90553:13)
at processRootFile (typescript/stable/lib/typescript.js:90383:13)
at typescript/stable/lib/typescript.js:89399:60
at Object.forEach (typescript/stable/lib/typescript.js:280:30)
```
PR Close#33660
Prior to this patch all the styling benchmarks only tested for
template map-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate map-based styling bindings.
This benchmark introduces benchmarking for map-based style/class bindings
that are evaluated from both template bindings as well as directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_map_based_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33608
When ngcc is configured to generate reexports for a package using the
`generateDeepReexports` configuration option, it could incorrectly
render the reexports as often as the number of compiled classes in the
declaration file. This would cause compilation errors due to duplicated
declarations.
PR Close#33658
When the Angular compiler is operated through the ngc binary in watch
mode, changing a template in an external file would not cause the
component to be recompiled if Ivy is enabled.
There was a problem with how a cached compiler host was present that was
unaware of the changed resources, therefore failing to trigger a
recompilation of a component whenever its template changes. This commit
fixes the issue by ensuring that information about modified resources is
correctly available to the cached compiler host.
Fixes#32869
PR Close#33551
Prior to this patch all the styling benchmarks only tested for
template-based style/class bindings. Because of each of the bindings
being only present in the template, there was no possibility of
there being any duplicate bindings. This benchmark introduces
style/class bindings being evaluated from both a template and from
various directives.
This benchmark can be executed by calling:
```
bazel build //packages/core/test/render3/perf:duplicate_style_and_class_bindings_lib.min_debug.es2015.js
node dist/bin/packages/core/test/render3/perf/duplicate_style_and_class_bindings_lib.min_debug.es2015.js
```
The benchmark is also run via the `profile_all.js` script (found in
`packages/core/test/render3/perf/`)
PR Close#33600
Prior to this change, namespaced elements such as SVG elements would not
participate correctly in directive matching as their namespace was not
ignored, which was the case with the View Engine compiler. This led to
incorrect behavior at runtime and template type checking.
This commit resolved the issue by ignoring the namespace of elements and
attributes like they were in View Engine.
Fixes#32061
PR Close#33555
This issue was found when debugging a test failure that was using lazy
loaded modules with the router. When doing this, the router calls
`NgModuleFactory.create` for the loaded module. This module gets a new
injector so the overrides provided in TestBed are not applied unless the
Injectable is in the providers list (which is not the case for
{providedIn...} Injectables).
PR Close#33606
When debugging `LView`s it is easy to get lost since all of them have
the same name. This change does three things:
1. It makes `TView` have an explicit type:
- `Host`: for the top level `TView` for bootstrap
- `Component`: for the `TView` which represents components template
- `Embedded`: for the `TView` which represents an embedded template
2. It changes the name of `LView` to `LHostView`, `LComponentView`, and
`LEmbeddedView` depending on the `TView` type.
3. For `LComponentView` and `LEmbeddedView` we also append the name of
of the `context` constructor. The result is that we have `LView`s which
are name as: `LComponentView_MyComponent` and `LEmbeddedView_NgIfContext`.
The above changes will make it easier to understand the structure of the
application when debugging.
NOTE: All of these are behind `ngDevMode` and will get removed in
production application.
PR Close#33449
Prior to this commit, i18n runtime logic used `elementAttributeInternal` function (that uses `setAttribute` function under the hood) for all elements where i18n attributes are present. However the `<ng-container>` elements in a template may also have i18n attributes and calling `setAttribute` fails, since they are represented as comment nodes in DOM. This commit ensures that we call `setAttribute` on nodes with TNodeType.Element type (that support that operation) only.
PR Close#33599
This adds a common configurations used when developing code in VSCode.
Specifically it adds support for launching these targets as tasks and
ind debugger.
- `packages/core/test`
- `packages/core/test/render3`
- `packages/core/test/acceptance`
PR Close#33544
Previously the compiler would ignore everything in the attribute
name after the first dot. For example
<div [attr.someAttr.attrSuffix]="var"></div>
is turned into <div someAttr="varValue"></div>.
This commit ensures that whole attribute name is captured.
Now <div [attr.someAttr.attrSuffix]="var"></div>
is turned into <div someAttr.attrSuffix="varValue"></div>
PR Close#32256
2019-11-07 01:02:56 +00:00
4640 changed files with 225114 additions and 137430 deletions
# VSCode Remote Development - Developing inside a Containers
This folder contains configuration files that can be used to opt into working on this repository in a [Docker container](https://www.docker.com/resources/what-container) via [VSCode](https://code.visualstudio.com/)'s Remote Development feature (see below).
Info on remote development and developing inside a container with VSCode:
- [VSCode: Developing inside a Container](https://code.visualstudio.com/docs/remote/containers)
- [VSCode: Remote Development FAQ](https://code.visualstudio.com/docs/remote/faq)
## Usage
_Prerequisite: [Install Docker](https://docs.docker.com/install) on your local environment._
To get started, read and follow the instuctions in [Developing inside a Container](https://code.visualstudio.com/docs/remote/containers). The [.devcontainer/](.) directory contains pre-configured `devcontainer.json` and `Dockerfile` files, which you can use to set up remote development with a docker container.
In a nutshell, you need to:
- Install the [Remote - Containers](https://marketplace.visualstudio.com/items?itemName=ms-vscode-remote.remote-containers) extension.
- Copy [recommended-Dockerfile](./recommended-Dockerfile) to `Dockerfile` (and optionally tweak to suit your needs).
- Copy [recommended-devcontainer.json](./recommended-devcontainer.json) to `devcontainer.json` (and optionally tweak to suit your needs).
- Open VSCode and bring up the [Command Palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette).
- Type `Remote-Containers: Open Folder in Container` and choose your local clone of [angular/angular](https://github.com/angular/angular).
The `.devcontainer/devcontainer.json` and `.devcontainer/Dockerfile` files are ignored by git, so you can have your own local versions. We may occasionally update the template files ([recommended-devcontainer.json](./recommended-devcontainer.json), [recommended-Dockerfile](./recommended-Dockerfile)), in which case you will need to manually update your local copies (if desired).
## Updating `recommended-devcontainer.json` and `recommended-Dockerfile`
You can update and commit the recommended config files (which people use as basis for their local configs), if you find that something is broken, out-of-date or can be improved.
Please, keep in mind that any changes you make will potentially be used by many people on different environments. Try to keep these config files cross-platform compatible and free of personal preferences.
# - we trust that people do the right thing and not approve changes they don't feel confident reviewing
# - we use github teams so that we funnel code reviews to the most appropriate reviewer, this is why the team structure is fine-grained
# - we enforce that only approved PRs get merged to ensure that unreviewed code doesn't get accidentally merged
# - we delegate approval rights as much as possible so that we can scale better
# - each group must have at least one person, but several people are preferable to avoid a single point of failure issues
# - most file groups have one or two global approvers groups as fallbacks:
# - @angular/fw-global-approvers: for approving minor changes, large-scale refactorings, and emergency situations.
# - @angular/fw-global-approvers-for-docs-only-changes: for approving minor documentation-only changes that don't require engineering review
# - a small number of file groups have very limited number of reviewers because incorrect changes to the files they guard would have serious consequences (e.g. security, public api)
#
# Configuration nuances:
#
# - This configuration works in conjunction with the protected branch settings that require all changes to be made via pull requests with at least one approval.
# - This approval can come from an appropriate codeowner, or any repo collaborator (person with write access) if the PR is authored by a codeowner.
# - Each codeowners team must have write access to the repo, otherwise their reviews won't count.
#
# In the case of emergency, the repo administrators which include angular-caretaker can bypass this requirement.
This folder contains opt-in [Workspace Settings](https://code.visualstudio.com/docs/getstarted/settings) and [Extension Recommendations](https://code.visualstudio.com/docs/editor/extension-gallery#_workspace-recommended-extensions) that the Angular team recommends using when working on this repository.
This folder contains opt-in [Workspace Settings](https://code.visualstudio.com/docs/getstarted/settings), [Tasks](https://code.visualstudio.com/docs/editor/tasks), [Launch Configurations](https://code.visualstudio.com/Docs/editor/debugging#_launch-configurations) and [Extension Recommendations](https://code.visualstudio.com/docs/editor/extension-gallery#_workspace-recommended-extensions) that the Angular team recommends using when working on this repository.
## Usage
To use the recommended settings follow the steps below:
To use the recommended configurations follow the steps below:
- copy `.vscode/recommended-settings.json` to `.vscode/settings.json`
- install the recommneded extensions in `.vscode/extensions.json`
- copy (or link)`.vscode/recommended-settings.json` to `.vscode/settings.json`
- copy (or link) `.vscode/recommended-launch.json` to `.vscode/launch.json`
- copy (or link) `.vscode/recommended-tasks.json` to `.vscode/tasks.json`
- restart the editor
If you already have your custom workspace settings you should instead manually merge the file content.
If you already have your custom workspace settings you should instead manually merge the file contents.
This isn't an automatic process so you will need to repeat it when settings are updated.
To see the recommended extensions select "Extensions: Show Recommended Extensions" in the [Command Palette](https://code.visualstudio.com/docs/getstarted/userinterface#_command-palette).
## Editing `.vscode/recommended-settings.json`
## Editing `.vscode/recommended-*.json` files
If you wish to add extra configuration items please keep in mind any settings you add here will be used by many users.
If you wish to add extra configuration items please keep in mind any modifications you make here will be used by many users.
Try to keep these settings to things that help facilitate the development process and avoid altering the user workflow whenever possible.
Try to keep these settings/configuations to things that help facilitate the development process and avoid altering the user workflow whenever possible.
@ -55,9 +55,9 @@ We want to fix all the issues as soon as possible, but before fixing a bug we ne
A minimal reproduction allows us to quickly confirm a bug (or point out a coding problem) as well as confirm that we are fixing the right problem.
We will be insisting on a minimal reproduction scenario in order to save maintainers time and ultimately be able to fix more bugs. Interestingly, from our experience users often find coding problems themselves while preparing a minimal reproduction. We understand that sometimes it might be hard to extract essential bits of code from a larger code-base but we really need to isolate the problem before we can fix it.
We will be insisting on a minimal reproduction scenario in order to save maintainers time and ultimately be able to fix more bugs. Interestingly, from our experience, users often find coding problems themselves while preparing a minimal reproduction. We understand that sometimes it might be hard to extract essential bits of code from a larger codebase but we really need to isolate the problem before we can fix it.
Unfortunately, we are not able to investigate / fix bugs without a minimal reproduction, so if we don't hear back from you we are going to close an issue that doesn't have enough info to be reproduced.
Unfortunately, we are not able to investigate / fix bugs without a minimal reproduction, so if we don't hear back from you, we are going to close an issue that doesn't have enough info to be reproduced.
You can file new issues by selecting from our [new issue templates](https://github.com/angular/angular/issues/new/choose) and filling out the issue template.
@ -168,7 +168,7 @@ format that includes a **type**, a **scope** and a **subject**:
The **header** is mandatory and the **scope** of the header is optional.
Any line of the commit message cannot be longer 100 characters! This allows the message to be easier
Any line of the commit message cannot be longer than 100 characters! This allows the message to be easier
to read on GitHub as well as in various git tools.
The footer should contain a [closing reference to an issue](https://help.github.com/articles/closing-issues-via-commit-messages/) if any.
@ -206,6 +206,8 @@ The scope should be the name of the npm package affected (as perceived by the pe
The following is the list of supported scopes:
* **animations**
* **bazel**
* **benchpress**
* **common**
* **compiler**
* **compiler-cli**
@ -214,6 +216,7 @@ The following is the list of supported scopes:
* **forms**
* **http**
* **language-service**
* **localize**
* **platform-browser**
* **platform-browser-dynamic**
* **platform-server**
@ -232,8 +235,9 @@ There are currently a few exceptions to the "use package name" rule:
* **changelog**: used for updating the release notes in CHANGELOG.md
* **docs-infra**: used for docs-app (angular.io) related changes within the /aio directory of the
repo
* **ivy**: used for changes to the [Ivy renderer](https://github.com/angular/angular/issues/21706).
* **dev-infra**: used for dev-infra related changes within the directories /scripts, /tools and /dev-infra
* **ngcc**: used for changes to the [Angular Compatibility Compiler](./packages/compiler-cli/ngcc/README.md)
* **ve**: used for changes specific to ViewEngine (legacy compiler/renderer).
* none/empty string: useful for `style`, `test` and `refactor` changes that are done across all
packages (e.g. `style: add missing semicolons`) and for docs changes that are not related to a
specific package (e.g. `docs: fix typo in tutorial`).
@ -262,8 +266,8 @@ A detailed explanation can be found in this [document][commit-message-format].
Please sign our Contributor License Agreement (CLA) before sending pull requests. For any code
changes to be accepted, the CLA must be signed. It's a quick process, we promise!
* For individuals we have a [simple click-through form][individual-cla].
* For corporations we'll need you to
* For individuals, we have a [simple click-through form][individual-cla].
* For corporations, we'll need you to
[print, sign and one of scan+email, fax or mail the form][corporate-cla].
<hr>
@ -279,7 +283,6 @@ changes to be accepted, the CLA must be signed. It's a quick process, we promise
[](https://gitter.im/angular/angular?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
@ -21,7 +20,6 @@ Angular is a development platform for building mobile and desktop web applicatio
Want to file a bug, contribute some code, or improve documentation? Excellent! Read up on our
guidelines for [contributing][contributing] and then check out one of our issues in the [hotlist: community-help](https://github.com/angular/angular/labels/hotlist%3A%20community-help).
<divclass="item clearance special"[class.item-clearance]="itemClearance">Add another class</div>
<!-- #enddocregion add-class -->
<!-- #docregion source-specificity-->
<h3>Source specificity</h3>
<!--#docregion class-override -->
<h3>Overwrite all existing classes with a new class:</h3>
<divclass="item clearance special"[attr.class]="resetClasses">Reset all classes at once</div>
<!-- #enddocregion class-override -->
<!--The `class.special` template binding will override any host binding to the `special` class set by `dirWithClassBinding` or `comp-with-host-binding`.-->
<!-- The `style.color` template binding will override any host binding to the `color` property set by `dirWithStyleBinding` or `comp-with-host-binding`. -->
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
