This lets Angular Bazel users install our transitive deps, rather than have to list them in their WORKSPACE file.
If they want a different version of one of these deps, they just need to install it before calling rules_angular_dependencies.
If the documentation contains a `@selectors` tag then the content of that
is used to describe the selectors of a directive.
Otherwise the selector string is split and each selector is listed as
a list item in an unordered list.
PR Close#25768
line 39: `highly-interactive` is the pre-qualifier of `Angular application`, which is the subject so the comma is not necessary (I think). I think this will make it easier for non-native speakers.
PR Close#25853
* Pull out `activateRoutes` into new operator
* Add `asyncTap` operator
* Use `asyncTap` operator for router hooks and remove corresponding abstracted operators
* Clean up formatting
* Minor performance improvements
PR Close#25740
This is a major refactor of how the router previously worked. There are a couple major advantages of this refactor, and future work will be built on top of it.
First, we will no longer have multiple navigations running at the same time. Previously, a new navigation wouldn't cause the old navigation to be cancelled and cleaned up. Instead, multiple navigations could be going at once, and we imperatively checked that we were operating on the most current `router.navigationId` as we progressed through the Observable streams. This had some major faults, the biggest of which was async races where an ongoing async action could result in a redirect once the async action completed, but there was no way to guarantee there weren't also other redirects that would be queued up by other async actions. After this refactor, there's a single Observable stream that will get cleaned up each time a new navigation is requested.
Additionally, the individual pieces of routing have been pulled out into their own operators. While this was needed in order to create one continuous stream, it also will allow future improvements to the testing APIs as things such as Guards or Resolvers should now be able to be tested in much more isolation.
* Add the new `router.transitions` observable of the new `NavigationTransition` type to contain the transition information
* Update `router.navigations` to pipe off of `router.transitions`
* Re-write navigation Observable flow to a single configured stream
* Refactor `switchMap` instead of the previous `mergeMap` to ensure new navigations cause a cancellation and cleanup of already running navigations
* Wire in existing error and cancellation logic so cancellation matches previous behavior
PR Close#25740
As it turns out, in GitHub API paginated requests, page numbering is
1-based. (https://developer.github.com/v3/#pagination)
Starting at page 0 (which returns the first page), results in making the
same request twice and logging incorrect numbers (since the first 100
items are listed twice).
PR Close#25671
Includes the following fixes:
- Fix cron entry format for clean-up script.
Crontabs in `/etc` should not have a user field. No idea why it used
to work before, but it started giving errors recently:
`/bin/sh: root: not found`.
- Set required env variable in clean-up script. (Broken in cc6f36a9d.)
This was producing the following error:
`ERROR: Missing required environment variable 'AIO_CIRCLE_CI_TOKEN'!`
- Use the correct path for downloads to be removed. (Broken in cc6f36a9d.)
PR Close#25671
The deployment of PR previews is triggered by the notification webhook
of the `aio_preview` CircleCI job (which creates and stores the build
artifacts).
This commit adds a new job (`test_aio_preview`), which waits for the
preview to be deployed (for PRs that do have a preview) and then runs
some tests against it (currently only PWA tests).
Fixes#23818
PR Close#25671
There several reasons why PRs cannot have (public) previews:
- The PR did not affect any relevant files (e.g. non-spec files in
`aio/` or `packages/`).
- The PR cannot be automatically verified as "trusted" (based on its
author or labels).
Note:
The endpoint does not check whether there currently is a (public)
preview for the specified PR; only whether there can be one.
PR Close#25671
According to the docs, the response of GitHub's [PR files API][1]
_"includes a maximum of 300 files"_. This means that if a PR contains
more files, it is possible that not all files are retrieved (which
could, for example, give a false negative for the "significant files
touched" check - not likely but possible).
This commit fixes it by using paginated requests to retrieve all changed
files.
[1]: https://developer.github.com/v3/pulls/#list-pull-requests-files
PR Close#25671
Some tests where comparing actual with expected paths, without taking
into account that paths will be different on Windows.
This commit uses `path.resolve()` to convert expected paths to their
OS-specific form.
PR Close#25671
Previously, due to multiple scripts re-building during `yarn dev`
initialization, there could be race conditions that led to errors.
This commit fixes it by ensuring `yarn build` is run once (before
the main `yarn dev` script).
PR Close#25671
In some cases, example when the user clears the caches in DevTools but
the SW remains active on another tab and keeps references to the deleted
caches, trying to write to the cache throws errors (e.g.
`Entry was not found`).
When this happens, the SW can no longer work correctly and should enter
a degraded mode allowing requests to be served from the network.
Possibly related:
- https://github.com/GoogleChrome/workbox/issues/792
- https://bugs.chromium.org/p/chromium/issues/detail?id=639034
This commits remedies this situation, by ensuring the SW can enter the
degraded `EXISTING_CLIENTS_ONLY` mode and forward requests to the
network.
PR Close#26042
Properties are not allowed usage notes, and in this case the example
is so simple it didn't warrant moving it to the overall class documentation.
PR Close#26039
When we have navigated to the site via a URL that contains a search
query param, the site shows the search results.
We want to remove that query param from the URL when the search
results are closed, but the current implementation is also removing
other query params unnecessarily.
Now only the search param is removed when the search results are
closed.
See https://github.com/angular/angular/pull/25479/files#r219497804
for more context.
PR Close#26056
The default dgeni config is to concatenate leading comments in front of API items.
In the case that you have an API item that starts a file with no import statements,
the license comment at the top of the file was being added to the front of the
API item's comment. SInce the license comment includes the `@license` tag
and the API item's comment did not start with `@description` the content of
the API item's comment was being put inside the `@license` tag, and no
description was being extracted from the API item's comment.
This commit updates to a version of dgeni-packages that has a switch to turn off
this concatenation, and then also configures this switch.
Closes#26045
PR Close#26050
* Pull out `activateRoutes` into new operator
* Add `asyncTap` operator
* Use `asyncTap` operator for router hooks and remove corresponding abstracted operators
* Clean up formatting
* Minor performance improvements
PR Close#25740
This is a major refactor of how the router previously worked. There are a couple major advantages of this refactor, and future work will be built on top of it.
First, we will no longer have multiple navigations running at the same time. Previously, a new navigation wouldn't cause the old navigation to be cancelled and cleaned up. Instead, multiple navigations could be going at once, and we imperatively checked that we were operating on the most current `router.navigationId` as we progressed through the Observable streams. This had some major faults, the biggest of which was async races where an ongoing async action could result in a redirect once the async action completed, but there was no way to guarantee there weren't also other redirects that would be queued up by other async actions. After this refactor, there's a single Observable stream that will get cleaned up each time a new navigation is requested.
Additionally, the individual pieces of routing have been pulled out into their own operators. While this was needed in order to create one continuous stream, it also will allow future improvements to the testing APIs as things such as Guards or Resolvers should now be able to be tested in much more isolation.
* Add the new `router.transitions` observable of the new `NavigationTransition` type to contain the transition information
* Update `router.navigations` to pipe off of `router.transitions`
* Re-write navigation Observable flow to a single configured stream
* Refactor `switchMap` instead of the previous `mergeMap` to ensure new navigations cause a cancellation and cleanup of already running navigations
* Wire in existing error and cancellation logic so cancellation matches previous behavior
PR Close#25740
All directives and pipes must now be tagged with one ore more
public NgModule, from which they are exported.
If an item is exported transitively via a re-exported internal NgModule
then it may be that the item appears to be exported from more than
one public NgModule. For example, there are shared directives that
are exported in this way from `FormsModule` and `ReactiveFormsModule`.
The doc-gen will error and fail if a directive or pipe is not tagged correctly.
NgModule pages now list all the directives and pipes that are exported from it.
Directive and Pipe pages now list any NgModule from which they are exported.
Packages also now list any NgModules that are contained - previously they were
missed.
PR Close#25734
`TypeScript` only supports merging and extending of `compilerOptions`. This is an implementation to support extending and inheriting of `angularCompilerOptions` from multiple files.
Closes: #22684
PR Close#22717
Firebase used to do it automatically (with `cleanUrls: true`), but it
stopped doing it unless the resulting URL corresponds to an existing
file (which is not always the case in angular.io; e.g. the resulting URL
might be matched by a new redirect rule).
This change in Firebase hosting behavior resulted in some URLs not being
correctly redirected (e.g. URLs to the archived v2 site, or `.html`
suffixed URLs from 3rd-party sites).
This commit fixes it, by configuring Firebase hosting to strip off the
`.html` extension and redirect (if no other redirect rule matched).
PR Close#25999
Enables Chrome users to search angular.io and its subdomains from the browsers navigation bar.
Not sure if compatible with Firefox yet.
The queried term in the URL is removed after closing the search-results.
PR Close#25479
Previously, when you attempted to bootstrap a component that had a
router-outlet using ngsummaries, it would complain that the component
was not provided by any module even if it was. This commit fixes a
mistake (AFAICT) which caused the lookup of the component in the AOT
summaries to fail.
I believe this change is safe. I've run the affected tests within Google
and there were no breakages caused by this change.
PR Close#24892
Create getter methods `getXXXDef` for each definition which
uses `hasOwnProperty` to verify that we don't accidently read form the
parent class.
Fixes: #24011Fixes: #25026
PR Close#25736
Various user code uses 'instanceof' to check whether a particular instance
is a TemplateRef, ElementRef, etc. Ivy needs to work with these checks.
PR Close#25775
Previously, if ngtsc encountered a VariableDeclaration without an
initializer, it would assume that the variable was undefined, and
return that result.
However, for symbols exported from external modules that resolve to
.d.ts files, variable declarations are of the form:
export declare let varName: Type;
This form also lacks an initializer, but indicates the presence of an
importable symbol which can be referenced. This commit changes the
static resolver to understand variable declarations with the 'declare'
keyword and to generate references when it encounters them.
PR Close#25775
The bootstrap property of @NgModule was not previously compiled by
the compiler in AOT or JIT modes (in Ivy). This commit adds support
for bootstrap.
PR Close#25775
Closure requires @nocollapse on Ivy definition static fields in order
to not convert them to standalone constants. However tsickle, the tool
which would ordinarily be responsible for adding @nocollapse, doesn't
properly annotate fields which are added synthetically via transforms.
So this commit adds @nocollapse by applying regular expressions against
code during the final write to disk.
PR Close#25775
This fix is for the issue below when compiling I18N Angular apps using closure.
For certain locales closure converts the input locale id to a different equivalent locale string. For example if the input locale is 'id'(for Indonesia) goog.LOCALE is set to 'in' and the closure locale data is registered only for 'in'. The Angular compiler uses the original input locale string, 'id' to set the LOCALE_ID token and there is a mismatch of locale used to register and locale used when requesting the locale data.
The fix is for the closure-locale.ts code to register the locale data for all equivalent locales names so that it doesn't matter what goog.LOCALE is actually set to.
PR Close#25867
Add following to your `~/.bazelrc`. This will run the build faster locally
(outside of sandbox), but continue running the builds with sandboxing
on CI.
```
build --spawn_strategy=standalone --strategy=ESM5=sandboxed
```
PR Close#25870
Since `aio/src/generated/` is git-ignored, it is easy for stale content
(e.g. removed images, examples, zips, etc.) to remain there on local
clones and then get copied into the `dist/` directory.
This commit ensures `aio/src/generated/` is cleaned up before generating
the new content.
PR Close#25841
`ngcc` adds marker files to each folder that has been
compiled, containing the version of the ngcc used.
When compiling, it will ignore folders that contain these
marker files, as long as the version matches.
PR Close#25557
As part of the tests run in the CircleCI `aio_monitoring` job, we need
to retrieve `sitemap.xml` from the site under test. Previously, the URL
used to retrieve that contained a double-slash (`//`). At some point,
Firebase (which is used for hosting the site) stopped normalizing
double-slashes to a single slash, causing the test to fail.
This commit fixes the problem by ensuring that the constructed URLs do
not contain double-slashes.
PR Close#25641
defineComponent() and friends can return a flyweight EMPTY object for
specific fields when they contain no data. InheritDefinitionFeature
was attempting to write into these flyweight objects, which have been
protected with Object.freeze().
This commit adds detection to InheritDefinitionFeature to identify the
frozen objects.
PR Close#25755
Now that the doc-gen parses the imports of TS source
files we need to ensure that the root node_modules
exists. Otherwise running `yarn docs` produces an
obscure error:
```
Error: No SourceFile found with path node_modules/@types/jasmine/index.d.ts
```
Closes#25759
PR Close#25811
While creating FESM files, rollup usually drops all unused symbols.
All *__POST_NGCC__ are unused unless ngcc rewires stuff. To prevent this DCE
we reexport them as private symbols. If ngcc is not used, these symbols will
be dropped when we optimize an application bundle.
We don't have an infrastructure to test this fix, so I just manually inspected
the bundles before and after to verify that the fix works.
PR Close#25780
Closure compiler requires that the i18n message constants of the form
const MSG_XYZ = goog.getMessage('...');
have names that are unique across an entire compilation, even if the
variables themselves are local to a given module. This means that in
practice these names must be unique in a codebase.
The best way to guarantee this requirement is met is to encode the
relative file name of the file into which the constant is being written
into the constant name itself. This commit implements that solution.
PR Close#25689
TypeScript has a more modern diagnostic emit function which produces
contextually annotated error information, using colors in the console
to indicate where in the code the error occurs.
This commit swiches ngtsc to use this format for diagnostics when
emitting them after a failed compilation.
PR Close#25647
This commit takes the first steps towards ngtsc producing real
TypeScript diagnostics instead of simply throwing errors when
encountering incorrect code.
A new class is introduced, FatalDiagnosticError, which can be thrown by
handlers whenever a condition in the code is encountered which by
necessity prevents the class from being compiled. This error type is
convertable to a ts.Diagnostic which represents the type and source of
the error.
Error codes are introduced for Angular errors, and are prefixed with -99
(so error code 1001 becomes -991001) to distinguish them from other TS
errors.
A function is provided which will read TS diagnostic output and convert
the TS errors to NG errors if they match this negative error code
format.
PR Close#25647
Previously, benchpress would use `console.time()` and
`console.timeEnd()` to measure the start and end of a test in the
performance log. This used to work over navigations - if you called
`console.time(id)` then navigated to a different page, calling
`console.timeEnd(id)` would still insert an event in the performance
log.
As of Chrome 65, this is no longer the case. `console.timeEnd(id)` will
simply not insert an event in the performance log unless
`console.time(id)` was called on the same page. Likewise, using
`performance.measure()` does not work if the starting mark was on a
different page.
This simple workaround uses `performance.mark()` to insert events in the
performance log at the start and end of the test. Benchpress looks for
'-bpstart' and '-bpend' in the name of the performance mark, and
normalizes that to the start and end events expected by PerflogMetric
PR Close#24114
When using ViewEncapsulation.ShadowDom, Angular will not remove the child nodes of the DOM node a root Component is bootstrapped into. This enables developers building Angular Elements to use the `<slot>` element to do native content projection.
PR Close#24861
By pulling in `compiler` into `core` the `compiler` was not
100% tree-shakable and about 8KB of code was retained
when tree-shaken with closure.
PR Close#25531
Due to unknown reasons, Firebase seems to return a 301 response for
`/index.html`, but without a `Location` header. According to the spec,
the browser will not follow the redirect, considering the response as
failed, instead.
This commit temporarily removes `index.html` from hashed resources and
changes `index` to `/` in `ngsw-config.json`, until we figure out an
appropriate long-term solution.
PR Close#25692
In tsc 3.0 the check that enables program structure reuse in tryReuseStructureFromOldProgram has changed
and now uses identity comparison on arrays within CompilerOptions. Since we recreate the options
on each incremental compilation, we now fail this check.
After this change the default set of options is reused in between incremental compilations, but we still
allow options to be overriden if needed.
PR Close#25275
In an overloaded method, the overload with the function body is the
actual method doc, and this doc is not included in the list of "additional"
overloads.
Moreover, the logic (all in dgeni-packages) is that if none of the items
has a body then we use the first overload as the actual method doc.
In the case of abstract methods, none of the methods have a body. So we
have a situation where the overloads collection does not contain the first
abstract method, even though it is not the "implementation" of the method.
Therefore we need to still render it.
Closes#25610
PR Close#25670
One of the tests was creating TestComponent instance _and_ using
global state making this test not predictable. Fixing the test
by making sure that TestComponent is instantiated only once.
PR Close#25632
This allows URLs to be passed through to the server (where they are
properly redirected), instead of serving `index.html` from the SW.
Known issue:
`/docs/` will be passed through to the server. `/docs` (without the
trailing slash) will be correctly treated as a navigation URL and
handled by the SW.
We don't link to `/docs/` from within the app, but if there are external
links to `/docs/` they will require a round-trip to the server and will
not work in offline mode.
PR Close#19795
AIO is currently using a beta version of @angular/service-worker.
Since that was implemented, the SW has been rewritten and released
as part of Angular 5.0.0. This commit updates AIO to use the latest
implementation, with an appropriate configuration file that caches
the various AIO assets in useful ways.
PR Close#19795
This fixes a bug in ngtsc where each @Directive was compiled using a
separate ConstantPool. This resulted in two issues:
* Directive constants were not shared across the file
* Extra statements from directive compilation were dropped instead of
added to the file
This commit fixes both issues and adds a test to verify @Directive is
working properly.
PR Close#25620
Workaround was added in https://github.com/angular/angular/pull/25335. It was necessary for .ngfactory & .ngsummary files to have proper AMD module names starting with @angular when building angular downstream from source using Bazel. The underlying issue has been resolved in the compiler and these files now get proper AMD module names without the need for this workaround. The workaround had an unexpected consequence https://github.com/angular/angular-cli/issues/11835 which is fixed by its removal.
PR Close#25604
This commit adds support for enumeration values. An enumeration value
is now a first-class return value of the resolver, which provides both
a Reference to the enum type itself and the name of the value from that
enum. Resolving an enum itself returns a Map<string, EnumValue>.
PR Close#25619
This commit adds an integration test for ngcc, which runs ngcc
against most @angular packages. It does not yet make any assertions
on the result.
PR Close#25406
Ivy definitions in .d.ts files often reference the type of a class.
Sometimes, those classes have generic type parameters. When this is
the case, ngtsc needs to emit generic type parameters in the .d.ts
files (usually by passing 'any').
PR Close#25406
Since non-flat module formats (esm2015, esm5) have different structure
than their flat counterparts (and since we are operating on JS files
inside `node_modules/`, we need to configure TS to include deeply nested
JS files (by specifying a sufficiently high `maxNodeModuleJsDepth`).
Remains to be determined if this has any (noticeable) performance
implications.
PR Close#25406
In some code formats (e.g. ES5) methods can actually be function
expressions. For example:
```js
function MyClass() {}
// this static method is declared as a function expression
MyClass.staticMethod = function() { ... };
```
PR Close#25406
ngtsc's static resolver can evaluate function calls where parameters
have default values. In TypeScript code these default values live on the
function definition, but in ES5 code the default values are represented
by statements in the function body.
A new ReflectionHost method getDefinitionOfFunction() abstracts over
this difference, and allows the static reflector to more accurately
evaluate ES5 code.
PR Close#25406
This is needed to let ts_compile_actions take explicit list of srcs and deps to generate tsc actions from another rule. This is no-op for ngc for now.
PR Close#25558
CanLoad now defines UrlSegment[] as a second parameter of the function.
Users can store the initial url segments and refer to them later, e.g. to go
back to the original url after authentication via router.navigate(urlSegments).
Existing code still works as before because the second function parameter
does not have to be defined.
Closes#12411
PR Close#13127
Provides a runtime and compile time switch for ivy including
`ApplicationRef.bootstrapModule`.
This is done by naming the symbols such that `ngcc` (angular
Compatibility compiler) can rename symbols in such a way that running
`ngcc` command will switch the `@angular/core` module from `legacy` to
`ivy` mode.
This is done as follows:
```
const someToken__PRE_NGCC__ = ‘legacy mode’;
const someToken__POST_NGCC__ = ‘ivy mode’;
export someSymbol = someToken__PRE_NGCC__;
```
The `ngcc` will search for any token which ends with `__PRE_NGCC__`
and replace it with `__POST_NGCC__`. This allows the `@angular/core`
package to be rewritten to ivy mode post `ngcc` execution.
PR Close#25238
Previously, Travis pushed the build artitfacts to the preview server.
This required us to use JWT to secure the POST request from Travis, to
ensure we couldn't receive malicious builds.
JWT has been deprecated and we are moving our builds to CircleCI.
This commit rewrites the TypeScript part of the preview server that
handles converting build artifact into hosted previews of the docs.
Now instead of pushing the AIO build artifacts to the preview server
from inside a Travis job, the artifacts are built and hosted on the
CircleCI infrastructure. The preview server will then pull these
down after being triggered by a CircleCI build webhook.
At the moment `cacheAge` can we undefined when having `Cache-Control` set to `no-cache` due the mapping method in `needToRevalidate`
Closes#25442
PR Close#25408
A small bug caused base factory variable statements for @Component to
not be emitted properly. At the same time as this is fixed, those
statements are now emitted as const.
PR Close#25425
When an Angular decorated class is inherited, it might be the case that
the entire inheritance chain actually has no constructor defined. In
that event, a factory which simply instantiates the type without any
arguments should be used.
PR Close#25425
This turns on generation of ngfactory.js files when compiling in Ivy
mode in g3. They're not turned on for Bazel users as there appears to
be a strange interaction with the way our tests run in Bazel mode.
PR Close#25392
When @angular/core is compiled by ngtsc, a factory file is generated
for ApplicationModule, that is currently invalid because r3_symbols
does not export NgModuleFactory. This change fixes that issue and
ensures the generated ngfactory file for @angular/core is valid.
PR Close#25392
When generating the 'directives:' property of ngComponentDef, ngtsc
needs to be conscious of declaration order. If a directive being
written into the array is declarated after the component currently
being compiled, then the entire directives array needs to be wrapped
in a closure.
This commit fixes ngtsc to pay attention to such ordering issues
within directives arrays.
PR Close#25392
This commit creates an API for factory functions which allows them
to be inherited from one another. To do so, it differentiates between
the factory function as a wrapper for a constructor and the factory
function in ngInjectableDefs which is determined by a default
provider.
The new form is:
factory: (t?) => new (t || SomeType)(inject(Dep1), inject(Dep2))
The 't' parameter allows for constructor inheritance. A subclass with
no declared constructor inherits its constructor from the superclass.
With the 't' parameter, a subclass can call the superclass' factory
function and use it to create an instance of the subclass.
For @Injectables with configured providers, the factory function is
of the form:
factory: (t?) => t ? constructorInject(t) : provider();
where constructorInject(t) creates an instance of 't' using the
naturally declared constructor of the type, and where provider()
creates an instance of the base type using the special declared
provider on @Injectable.
PR Close#25392
Previously, ngtsc used a new ConstantPool for each decorator
compilation. This could result in collisions between constants in the
top-level scope.
Now, ngtsc uses a single ConstantPool for each source file being
compiled, and merges the constant statements into the file after the
import section.
PR Close#25392
The performCompilation() is always called with an undefined oldProgram option (even in watch mode).
This was regression introduced in: 957be960d2
Partial fix, discovered in: #21361
PR Close#21364
Inside of a nested template, an attempt to generate code for a banana-
in-a-box expression would cause a crash in the _AstToIrVisitor, as it
was not handling the case where a write would be generated to a local
variable.
This change supports such a mode of operation.
PR Close#25321
data about tasks.
When building a list of pending tasks for callers of whenStable(),
Testability will copy data about the task into a new object, in order to
avoid leaking references to tasks.
This change copies more properties from Tasks into the list of pending
tasks, as well as a reference to Task.data to give callers more
information about the tasks that are pending.
Specifically, this also copies runCount and task ID, which are needed in
order for callers to know when a given task is repeating.
PR Close#25010
The example unit test should test the service when the backend
application is not available, by providing a mock error response.
Although, the test will
fail as the mock response from the server is valid (it does not simulate
a
error response, but valid response with an error status 404).
This merge request fix this issue by replacing MockResponse with
MockError
This PR resolves 19499 issue
PR Close#25306
before:
```
Expected to find features 'import * as i0 from "@angular/core";
import { Directive, Input } from '@angular/core';
```
after:
```
Failed to find "template" after "...Component_Factory() { return new
MyComponent(); }," in:
'import * as i0 from "@angular/core";
import { Directive, Input } from '@angular/core';```
```
PR Close#25291
To match the View Engine behavior.
We should make this configurable so that the node injector is tree shaken when
directives do not need to be published.
PR Close#25291
It seems that occasionally the sharding of docs examples e2e tests gets
messed up resulting in some tests not being run. This can cause CI to be
green on a PR, when they shouldn't (because the failing tests didn't run
at all).
It is unclear under what circumstances this happens, so printing the
paths of found e2e specs will help debug the issue when it comes up
again.
PR Close#25293
Previously the compiler compliance tests ran and built test code with
real dependencies on @angular/core and @angular/common. This meant that
any changes to the compiler would result in long rebuild processes
for tests to rerun.
This change removes those dependencies and causes test code to be built
against the fake_core stub of @angular/core that the ngtsc tests use.
This change also removes the dependency on @angular/common entirely, as
locality means it's possible to reference *ngIf without needing to link
to an implementation.
PR Close#25248
Existing bootstrap code in the wild depends on the existence of
.ngfactory files, which Ivy does not need. This commit adds the
capability in ngtsc to generate .ngfactory files which bridge
existing bootstrap code with Ivy.
This is an initial step. Remaining work includes complying with
the compiler option to specify a generated file directory, as well
as presumably testing in g3.
PR Close#25176
Before this change bound properties would not be used when matching directives
at runtime.
That is `<ng-template [ngIf]=cond>...</ng-template>` would not trigger the
`ngIf` directive.
PR Close#25272
This commit adds basic support for <ng-container> - most of the
functionality should work as long as <ng-container> is a child of
a regular element.
PR Close#25227
This has been deprecated to keep selector consistent with other core Angular selectors. As element selectors are in kebab-case.
Now deprecated:
```
<ngForm #myForm="ngForm">
```
After:
```
<ng-form #myForm="ngForm">
```
You can also choose to supress this warnings by providing a config for `FormsModule` during import:
```ts
imports: [
FormsModule.withConfig({warnOnDeprecatedNgFormSelector: 'never'});
]
Closes: #23678
PR Close#23721
docs: adds note according to Symlink problem
Closes#24709
docs(docs-infra): adds section "Developing on Windows"
Merge remote-tracking branch 'origin/aioREADME' into aioREADME
docs(docs-infra): adds information about admin rights
docs(docs-infra): adds hint
docs(docs-infra): Change to link
PR Close#24714
With this update to permissions the docs team can easily identify the technical reviewer for a particular doc, which should streamline the reviews.
I also added Jennifer into all groups that contain docs, so that she can approve changes that contain only editorial changes.
Closes#21692
PR Close#25257
The optional property on `ts.CompilerHost` is called `realpath` (lower
case), not `realPath` (lower camel case).
It is not clear to me what the impact of this is, but the author's
intent was clearly to override `realpath`.
PR Close#25023
This should help clarify the use of providedIn and correct the documentation where it was showing the use of a now depreciated CLI command flag.
I am openly looking for feedback on this change to figure out the best wording.
PR Close#25223
Before the `ngDevMode` had to be set explicitly or it would throw
an exception at runtime. This changes it so that if `ngDevModu` is
`undefined` than we default to `ngDevMode = true`. In other words
unless the developer has explicitly asked to make a prodution build
by setting `ngDevMode = false` as compilation constant, the default
is `ngDevMode = true`.
This also fixes a minor bug where the setup code would read
`global['ngDevMode']` but all other code would read `global.ngDevMode`.
This would cause issues with closure compiler since the
reading of the `ngDevMode` must be consistent.
PR Close#25208
Update XMB placeholders(<ph>) to include the original value on top of an
example. Placeholders can by definition have one example(<ex>) tag and a
text node. The text node is used by TC as the "original" value from the
placeholder, while the example should represent a dummy value.
For example: <ph name="PET"><ex>Gopher</ex>{{ petName }}</ph>.
This change makes sure that we have the original text, but it *DOES NOT*
make sure that the example is correct. The example has the same wrong
behavior of showing the interpolation text rather than a useful
example.
No breaking changes, but tools that depend on the previous behavior and
don't consider the full XMB definition may fail to parse the XMB.
Fixes b/72565847
PR Close#25079
Previously the auth token could have been split into three separate args in bash which resulted
in two bogus requests being sent out for each curl call. These requests had to time out before
the real request was made, but without the token.
I couldn't find a better way to quickly fix this without adding some duplication.
In some code formats (e.g. ES5) methods can actually be function
expressions. For example:
```js
function MyClass() {}
// this static method is declared as a function expression
MyClass.staticMethod = function() { ... };
```
PR Close#24897
The `ReflectionHost` interface that is being implemented only expects a
return value of `boolean`.
Moreover, if you want to extend this class to support non-TS code formats,
e.g. ES5, the result of this call returning true does not mean that the `node`
is a `ClassDeclaration`. It could be a `VariableDeclaration`.
PR Close#24897
- `directiveInjector()` is used to inject anything in the directive / component
/ pipe factories so adding `InjectionToken<T>` as a supported token type.
- `getOrCreateInjectable()` should search first in the node injector tree and
then in the module injector tree (was either or before the PR).
PR Close#25166
This change generalises the notification bar rendering to allow
more complex content to be displayed.
Now you must provide the full HTML of the notification message
when using `<aio-notification>`.
Also you can control whether clicking the content triggers the
notification to close or not.
This will support the new notification specified in "Other Items : 3" of
[#24140](https://github.com/angular/angular/issues/24140#issuecomment-397480410)
PR Close#25020
This commit replaces the "not implemented" error when calling
listLazyRoutes() with an empty result, which will allow testing
in the CLI before listLazyRoutes() is implemented.
PR Close#25080
loadNgStructureAsync() for ngtsc has a bug where it returns a
Promise<Promise[]> instead of awaiting the entire array of Promises.
This commit uses Promise.all() to await the whole set.
PR Close#25080
compile_strategy() is used to decide whether to build Angular code
using ngc (legacy) or ngtsc (local). In order for g3 BUILD rules
to switch properly and allow testing of Ivy in g3, they need to
import this function.
This commit removes the _ prefix which allows the function to be
imported.
PR Close#25080
ngtsc used to have a custom ts.CompilerHost which delegated to the plain
ts.CompilerHost. There's no need for this wrapper class and it causes
issues with CLI integration, so delete it.
PR Close#25080
ngtsc used to assume that all .d.ts dependencies (that is, third party
packages) were imported via an absolute module path. It turns out this
assumption isn't valid; some build tools allow relative imports of
other compilation units.
In the absolute case, ngtsc assumes (and still does) that all referenced
types are available through the entrypoint from which an @NgModule was
imported. This commit adds support for relative imports, in which case
ngtsc will use relative path resolution to determine the imports.
PR Close#25080
There is a bug in the existing handling for cross-file references.
Suppose there are two files, module.ts and component.ts.
component.ts declares two components, one of which uses the other.
In the Ivy model, this means the component will get a directives:
reference to the other in its defineComponent call.
That reference is generated by looking at the declared components
of the module (in module.ts). However, the way ngtsc tracks this
reference, it ends up comparing the identifier of the component
in module.ts with the component.ts file, detecting they're not in
the same file, and generating a relative import.
This commit changes ngtsc to track all identifiers of a reference,
including the one by which it is declared. This allows toExpression()
to correctly decide that a local reference is okay in component.ts.
PR Close#25080
When ngtsc encounters a reference to a type (for example, a Component
type listed in an NgModule declarations array), it traces the import
of that type and attempts to determine the best way to refer to it.
In the event the type is defined in the same file where a reference
is being generated, the identifier of the type is used. If the type
was imported, ngtsc has a choice. It can use the identifier from the
original import, or it can write a new import to the module where the
type came from.
ngtsc has a bug currently when it elects to rely on the user's import.
When writing a .d.ts file, the user's import may have been elided as
the type was not referred to from the type side of the program. Thus,
in .d.ts files ngtsc must always assume the import may not exist, and
generate a new one.
In .js output the import is guaranteed to still exist, so it's
preferable for ngtsc to continue using the existing import if one is
available.
This commit changes how @angular/compiler writes type definitions, and
allows it to use a different expression to write a type definition than
is used to write the value. This allows ngtsc to specify that types in
type definitions should always be imported. A corresponding change to
the staticallyResolve() Reference system allows the choice of which
type of import to use when generating an Expression from a Reference.
PR Close#25080
@ContentChild[ren] and @ViewChild[ren] can contain a forwardRef() to a
type. This commit allows ngtsc to unwrap the forward reference and
deal with the node inside.
It includes two modes of support for forward reference resolution -
a foreign function resolver which understands deeply nested forward
references in expressions that are being statically evaluated, and
an unwrapForwardRef() function which deals only with top-level nodes.
Both will be useful in the future, but for now only unwrapForwardRef()
is used.
PR Close#25080
It specifies --no-sandbox flag when running the protractor tests as
root. This is needed for running the tests inside a docker container.
PR Close#24906
Fixes#25018.
Instantiating a NgModuleRef from NgModuleFactory reuses the NgModuleDefinition if it is already present. However the NgModuleDefinition has a providers array which modified when tree shakable providers are instantiated. This corrupts the provider definitions the next time the same factory is used to create a new NgModuleRef - Two provider definitions can end up with the same index anf the injector could potentially return a completely wrong object for a provider token.
This scenario is more likely on the server where the same NgModuleFactory is reused across requests.
The fix clones the cached NgModuleDefinition so that any tree shakable providers added later do not affect the cached copy.
PR Close#25022
Ivy definition types have a generic type which specifies the return
type of the factory function. For example:
static ngDirectiveDef<NgForOf, '[ngFor][ngForOf]'>
However, in this case NgForOf itself has a type parameter <T>. Thus,
writing the above is incorrect.
This commit modifies ngtsc to understand the genericness of NgForOf and
to write the following:
static ngDirectiveDef<NgForOf<any>, '[ngFor][ngForOf]'>
PR Close#24862
Previously ngtsc would use a tuple of class types for listing metadata
in .d.ts files. For example, an @NgModule's declarations might be
represented with the type:
[NgIf, NgForOf, NgClass]
If the module had no declarations, an empty tuple [] would be produced.
This has two problems.
1. If the class type has generic type parameters, TypeScript will
complain that they're not provided.
2. The empty tuple type is not actually legal.
This commit addresses both problems.
1. Class types are now represented using the `typeof` operator, so the
above declarations would be represented as:
[typeof NgIf, typeof NgForOf, typeof NgClass].
Since typeof operates on a value, it doesn't require generic type
arguments.
2. Instead of an empty tuple, `never` is used to indicate no metadata.
PR Close#24862
Previously, some of the *Def symbols were not exported or were exported
as public API. This commit ensures every definition type is in the
private export namespace.
PR Close#24862
This commit moves the compiler compliance tests into compiler-cli,
and uses ngtsc to run them instead of the custom compilation
pipeline used before. Testing against ngtsc allows for validation
of the real compiler output.
This commit also fixes a few small issues that prevented the tests
from passing.
PR Close#24862
Previously, when translating an assignment expression (e.g. x = 3), the
translator would always print the statement as X = Y. However, if the
expression is included in a larger expression (X = (Y = Z)), the
translator would print "X = Y = Z" without regard for the outer
expression context.
Now, the translator understands when it's printing an expression
statement (X = Y;) vs an expression in a larger context (X = (Y = Z);)
and encapsulates the latter in parentheses.
PR Close#24862
Previously, references had the concept of an identifier, but would not
properly detect whether the identifier should be used or not when
generating an expression. This change fixes that logic.
Additionally, now whenever an identifier resolves to a reference (even
one imported from another module) as part of resolving an expression,
the reference is updated to use that identifier. This ensures that for
a class Foo declared in foo.ts, but referenced in an expression in
bar.ts, the Reference returned includes the identifier from bar.ts,
meaning that writing an expression in bar.ts for the Reference will not
generate an import.
PR Close#24862
Previously ngtsc had a bug where it would only detect the presence of
ngOnChanges as a static method. This commit flips the condition and only
recognizes ngOnChanges as a non-static method.
PR Close#24862
Previously, the static resolver did its own interpretation of statements
in the TypeScript AST, which only functioned on TypeScript code. ES5
code in particular would not work with the resolver as it had hard-coded
assumptions about AST structure.
This commit changes the resolver to use a ReflectionHost instead, which
abstracts away understanding of the structural side of the AST. It adds 3
new methods to the ReflectionHost in support of this functionality:
* getDeclarationOfIdentifier
* getExportsOfModule
* isClass
PR Close#24862
This change adds support for host bindings to ngtsc, and parses them
both from decorators and from the metadata in the top-level annotation.
PR Close#24862
ngInjectorDef.imports is generated from @NgModule.imports plus
@NgModule.exports. A problem arises as a result, because @NgModule
exports contain not only other modules (which will have ngInjectorDef
fields), but components, directives, and pipes as well. Because of
locality, it's difficult for the compiler to filter these out at
build time.
It's not impossible, but for now filtering them out at runtime will
allow testing of the compiler against complex applications.
PR Close#24862
@NgModule()s get compiled to two fields: ngModuleDef and ngInjectorDef.
Both fields contain imports, as both selector scopes and injectors have
the concept of composed units of configuration. Previously these fields
were generated by static resolution of imports and exports in metadata.
Support for ModuleWithProviders requires they be generated differently.
ngModuleDef's imports/exports are generated as resolved lists of types,
whereas ngInjectorDef's imports should reflect the raw expressions that
the developer wrote in the metadata.
This change modifies the NgModule handler and properly copies raw nodes
for the imports and exports into the ngInjectorDef.
PR Close#24862
Previously ngtsc had a few bugs handling special token types:
* Injector was not properly translated to INJECTOR
* ChangeDetectorRef was not injected via injectChangeDetectorRef()
This commit fixes these two bugs, and also adds a test to ensure
they continue to work correctly.
PR Close#24862
Within an @NgModule it's common to include in the imports a call to
a ModuleWithProviders function, for example RouterModule.forRoot().
The old ngc compiler was able to handle this pattern because it had
global knowledge of metadata of not only the input compilation unit
but also all dependencies.
The ngtsc compiler for Ivy doesn't have this knowledge, so the
pattern of ModuleWithProviders functions is more difficult. ngtsc
must be able to determine which module is imported via the function
in order to expand the selector scope and properly tree-shake
directives and pipes.
This commit implements a solution to this problem, by adding a type
parameter to ModuleWithProviders through which the actual module
type can be passed between compilation units.
The provider side isn't a problem because the imports are always
copied directly to the ngInjectorDef.
PR Close#24862
Metadata in Ivy must be literal. For example,
@NgModule({...})
is legal, whereas
const meta = {...};
@NgModule(meta)
is not.
However, some code contains additional superfluous parentheses:
@NgModule(({...}))
It is desirable that ngtsc accept this form of literal object.
PR Close#24862
This commit adds the ivy-local tag to //packages/router. Since the
router depends on //packages/upgrade, it makes that package
compatible with ngtsc as well.
PR Close#24862
This change turns on preserve-symlinks in nodejs to verify hermeticity of the Angular build.
BREAKING CHANGE: Use of @angular/bazel rules now requires calling ng_setup_workspace() in your WORKSPACE file.
For example:
local_repository(
name = "angular",
path = "node_modules/@angular/bazel",
)
load("@angular//:index.bzl", "ng_setup_workspace")
ng_setup_workspace()
PR Close#24881
Examples using `@angular/elements` need to transpile to es2015 for
Custom Elements to work (on browsers that natively support them).
Alternatively, a polyfill would need to be loaded. For now, changing the
transpilation target to es2015 is the simplest solution.
PR Close#24840
Adds an example of using the `currency` pipe with a currency that has no cents like CLP,
which will format the amount with no digits if `digitsInfo` is not provided:
<!-- outputs CA$14.00 -->
{{ 14 | currency:'CAD' }}
<!-- outputs CLP14 -->
{{ 14 | currency:'CLP' }}
Amends the docs, adds an example and fix an error with a current example.
PR Close#24661
This change fixes up several comments that accidentally used the JSDoc
tag @internal in regular block comments (`/*` instead of `/**`).
This prevents a problem with Closure Compiler that balks at `@` tags
occuring in regular block comments, because it assumes they were
intended to be tags for the compiler.
When occuring in `/**` JSDoc, tsickle escapes the tags, so they do not
cause problems.
PR Close#24928
for non-inline templates
- Non-inline templates used to ouput the path to the component TS file
instead of the path to the original HTML file.
- Inline templates keep the same behavior.
Fixes#24884
PR Close#24885
Travis (saucelabs) has been super flaky when running IE
web worker tests lately. This patch temporarily disables
these tests on IE (not edge) until things get more stable.
PR Close#24908
Update the documentation to match the CLI mechanics regarding relative URL in link tags.
docs: update info on stylesheet location for CLI
PR Close#24471
The `packages/core/src/animation/dsl.ts` symlink ws removed in #22692,
so `create-/remove-symlinks.sh` scripts for Windows should not try to
"fix" it.
PR Close#23121
It's possible to declare an argument-less NgModule:
@NgModule() export class Foo {}
Update the @NgModule compiler to support this usage.
PR Close#24738
Previously the Ivy template compiler would throw on encountering
an animation binding (e.g. [@anim]). This is unneccessary and
precludes testing existing code. This commit changes the error to a
warning.
PR Close#24738
When writing selectors as string literal types in .d.ts files,
strip newlines to avoid generating invalid code. Newlines carry
no meaning in selectors anyway.
PR Close#24738
On accident a few of the definition types were emitted as public API
symbols. Much of the Ivy API surface is still prefixed with ɵ,
indicating it's a private API. The definition types should be private
for now.
PR Close#24738
This commit changes the @NgModule provider to understand that sometimes
an import will resolve to an object instead of a type, and that object
could be of the ModuleWithProviders type. In that case, the 'ngModule'
property is read, and its value used instead.
This still will not handle ModuleWithProviders references across
compilation units; that work is coming in a future PR.
PR Close#24738
InjectorDef is parameterized on the type of the injector
configuration class (e.g. the @NgModule decorated type). Previously
this parameter was not included when generating .d.ts files that
contained InjectorDefs.
PR Close#24738
Change the sentence from 'this tells Angular how provide ...' to 'this tells Angular how to provide ...'. The current sentence does not make grammatical sense.
PR Close#24832
The current module resolution simply attaches .ts to the import/export path, which does
not work if the path is using Node / CommonJS behavior to resolve to an index.ts file.
This patch uses typescript's module resolution logic, and will attempt to load the original
typescript file if this resolution returns a .js or .d.ts file
PR Close#22856
Tree shakable providers use the APP_ROOT token to determine where to attach themselves. APP_ROOT gets set on NgModule with BrowserModule irrespective of whether it is actually the root(Ex. in case of SSR app where the shell app is first bootstrapped without BrowserModule being the root module).
This change allows a NgModule with BrowserModule to explicitly mark itself as not the root by setting APP_ROOT token to false. This allows tree shakable providers to be attached to the right rott module.
PR Close#24814
The reporter was added in 87d56acda, with the purpose of fixing
source-map paths (which was apparently needed back then). Things have
moved around a lot since then and the custom reporter doesn't seem to be
necessary any more. By removing the reporter, we have one less thing to
worry about while upgrading karma; plus we get improvements in built-in
reporters for free.
Output with the custom reporter:
```
at someMethod (packages/core/.../some-file.ts:13:37)
```
Output with the built-in reporter:
```
at someMethod (packages/core/.../some-file.ts:13.37 <- dist/all/@angular/core/.../some-file.js:1:337)
```
PR Close#24803
Due to changes in karma@1.0.0, `internal-angular` karma reporter stopped
showing browser logs (such as `console.log()` etc.).
Related to d571a5173.
PR Close#24803
The globbing is used in the following sections:
- `assetGroups` > `resources` > `files`/`versionedFiles`
- `assetGroups` > `resources` > `urls`
- `dataGroups` > `urls`
- `navigationUrls`
Query params are ignored for `files`/`versionedFiles` and
`navigationUrls`, but they are still taken into account for
`assetGroups`/`dataGroups` `urls`. To avoid a breaking change, `?` is
matched literally for these patterns.
PR Close#24105
With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).
I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.
[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)Fixes#23952Closes#24733
PR Close#19904
This updates the r3_pipe_compiler to not depend on global analysis,
and to produce ngPipeDef instructions in the same way that the other
compilers do. It's a precursor to JIT and AOT implementations of
@Pipe compilation.
PR Close#24703
This commit adds support for templateUrl in component templates within
ngtsc. The compilation pipeline is split into sync and async versions,
where asynchronous compilation invokes a special preanalyze() phase of
analysis. The preanalyze() phase can optionally return a Promise which
will delay compilation until it resolves.
A ResourceLoader interface is used to resolve templateUrls to template
strings and can return results either synchronously or asynchronously.
During sync compilation it is an error if the ResourceLoader returns a
Promise.
Two ResourceLoader implementations are provided. One uses 'fs' to read
resources directly from disk and is chosen if the CompilerHost doesn't
provide a readResource method. The other wraps the readResource method
from CompilerHost if it's provided.
PR Close#24704
This propagates other custom equality testers added by users. Additionally, if
an Angular project is using jasmine 2.6+, it will allow Jasmine's custom object
differ to print out pretty test error messages.
fixes#22939
PR Close#22983
- Adds InheritanceDefinitionFeature to ivy
- Ensures that lifecycle hooks are inherited from super classes whether they are defined as directives or not
- Directives cannot inherit from Components
- Components can inherit from Directives or Components
- Ensures that Inputs, Outputs, and Host Bindings are inherited
- Ensures that super class Features are run
PR Close#24570
Used to resolve resource URLs on `@Component` when used with JIT compilation.
```
@Component({
selector: 'my-comp',
templateUrl: 'my-comp.html', // This requires asynchronous resolution
})
class MyComponnent{
}
// Calling `renderComponent` will fail because `MyComponent`'s `@Compenent.templateUrl`
// needs to be resolved because `renderComponent` is synchronous process.
// renderComponent(MyComponent);
// Calling `resolveComponentResources` will resolve `@Compenent.templateUrl` into
// `@Compenent.template`, which would allow `renderComponent` to proceed in synchronous manner.
// Use browser's `fetch` function as the default resource resolution strategy.
resolveComponentResources(fetch).then(() => {
// After resolution all URLs have been converted into strings.
renderComponent(MyComponent);
});
```
PR Close#24637
- Removed surrounding spaces in interpolation expressions following the styleguide
- Consistant spacing of two spaces in html
Fixes#23105
PR Close#24497
Previously the todo app imported reflect-metadata, since it is a dependency
of JIT and the todo app tests run in both JIT and AOT modes. However, the
code doesn't get tree-shaken away in AOT mode.
This change adds a target //packages/core/test/bundling/util:reflect_metadata
which, depending on whether the compile flag is in JIT or AOT mode, either
includes reflect-metadata or is a no-op.
Not including reflect-metadata gets the compressed todo bundle down to 12.5 kB.
PR Close#24677
ngtsc is sufficiently capable now that it can compile hello_world
and todo and achieve equivalent results to ngc in ivy (global) mode.
Bundle sizes:
hello_world - 3.0 kB
todo - 14.7 kB
PR Close#24677
This change makes @angular/compiler more tree-shakeable by changing
an enum to a const enum and by getting rid of a top-level map that
the tree-shaker was seeing as a reference which caused r3_identifiers
to be retained.
This drops a few hundred bytes of JS from tree-shaken ngtsc compiled
apps.
PR Close#24677
The js_expected_symbol_test implementation extracts symbols names
from a rollup iife bundle. Previously, it only handled the case
with a simple 'var bundle = ...;' statement.
Sometimes, rollup produces a more complex bundle, where the 'bundle'
variable is not the only top-level variable declared in the same
declaration statement. This commit patches the symbol exctractor
to support this more complex case.
Additionally, when the symbol test fails, it prints a command to
accept the symbol diff. This command needs to include the
--define=compile flag to ensure the diff is applied in the same
compile mode as the test was run.
PR Close#24677
Currently ngtsc does not compile @Pipe. This has a side effect
of not removing the @Pipe decorator.
This adds a dummy DecoratorHandler that compiles @Pipe into an
empty ngPipeDef. Eventually this will be replaced with a full
implementation, but for now this solution allows compield code
to be tree-shaken properly.
PR Close#24677
Previously the repo was depending on an old version of build optimizer.
This change updates to the latest (an RC release in the CLI package).
Additionally, this changes the behavior of ng_rollup_bundle to apply
the optimizer to ngtsc compiled code, and configures it to treat the
@angular/compiler package as side-effect-free.
This results in a substantial size reduction of ngtsc compiled code.
PR Close#24677
Previously ngtsc removed the class-level decorators (@Component,
etc) but left all the ancillary decorators (@Input, @Optional,
etc).
This changes the transform to descend into the members of decorated
classes and remove any Angular decorators, not just the class-level
ones.
PR Close#24677
@angular/core is unique in that it defines the Angular decorators
(@Component, @Directive, etc). Ordinarily ngtsc looks for imports
from @angular/core in order to identify these decorators. Clearly
within core itself, this strategy doesn't work.
Instead, a special constant ITS_JUST_ANGULAR is declared within a
known file in @angular/core. If ngtsc sees this constant it knows
core is being compiled and can ignore the imports when evaluating
decorators.
Additionally, when compiling decorators ngtsc will often write an
import to @angular/core for needed symbols. However @angular/core
cannot import itself. This change creates a module within core to
export all the symbols needed to compile it and adds intelligence
within ngtsc to write relative imports to that module, instead of
absolute imports to @angular/core.
PR Close#24677
We must always use 1., 2. etc, to indicate ordered lists, even for sub-lists.
We can change the sublist to display as a., b. etc, via CSS.
PR Close#18487
PR Close#18487
Classes that are injectable often have constructors that should not be
called by the application developer. It is the responsibility of the
injector to instantiate the class and the constructor often contains
private implementation details that may need to change.
This commit removes constructors from the docs for API items that are
both:
a) Marked with an injectable decorator (e.g. Injectable, Directive,
Component, Pipe), and
b) Have no constructor description
This second rule allows the developer to override the removal if there
is something useful to say about the constructor.
Note that "normal" classes such as `angimations/HttpHeaders` do not have
their constructor removed, despite (at this time) having no description.
PR Close#24529
This commit takes advantage of the @angular/compiler work for ngInjectorDef
in AOT mode in order to generate the same definition in JIT mode.
PR Close#24632
This change generates ngInjectorDef as well as ngModuleDef for @NgModule
annotated types, reflecting the dual nature of @NgModules as both compilation
scopes and as DI configuration containers.
This required implementing ngInjectorDef compilation in @angular/compiler as
well as allowing for multiple generated definitions for a single decorator in
the core of ngtsc.
PR Close#24632
Animations styles weren't getting properly set on platform-server because of erroneous checks and absence of reflection of style property to attribute on the server.
The fix corrects the check for platform and explicitly reflects the style property to the attribute.
PR Close#24624
All errors for existing fields have been detected and suppressed with a
`!` assertion.
Issue/24571 is tracking proper clean up of those instances.
One-line change required in ivy/compilation.ts, because it appears that
the new syntax causes tsickle emitted node to no longer track their
original sourceFiles.
PR Close#24572
inject() was changed in da31db7 to not take a default value parameter,
so injectable_compiler_2 should not request the use of one when
using inject().
PR Close#24565
ngtsc needs to reflect over code to property compile it. It performs operations
such as enumerating decorators on a type, reading metadata from constructor
parameters, etc.
Depending on the format (ES5, ES6, etc) of the underlying code, the AST
structures over which this reflection takes place can be very different. For
example, in TS/ES6 code `class` declarations are `ts.ClassDeclaration` nodes,
but in ES5 code they've been downleveled to `ts.VariableDeclaration` nodes that
are initialized to IIFEs that build up the classes being defined.
The ReflectionHost abstraction allows ngtsc to perform these operations without
directly querying the AST. Different implementations of ReflectionHost allow
support for different code formats.
PR Close#24541
The outdated webpack guide has been removed in #24478, but people might
still try to access it (via direct links or search-engine results).
Instead of returning 404, we will now redirect `/guide/webpack` to the
archived version of the guide at `v5.angular.io/guide/webpack`.
PR Close#24595
This change supports compilation of components, directives, and modules
within ngtsc. Support is not complete, but is enough to compile and test
//packages/core/test/bundling/todo in full AOT mode. Code size benefits
are not yet achieved as //packages/core itself does not get compiled, and
some decorators (e.g. @Input) are not stripped, leading to unwanted code
being retained by the tree-shaker. This will be improved in future commits.
PR Close#24427
clang-format (on mac) has taken a disliking to this particular line, and
rewrites one of the ɵ characters to an invalid Unicode sequence.
PR Close#24479
At runtime in JIT mode, when the compiler writes a reference to a symbol that symbol
is resolved through a symbol table named angularCoreEnv in render3/jit/environment.
Previously, this symbol table was not kept up-to-date with the Ivy instruction set
and the names of symbols the compiler could reference.
This change brings the symbol table in sync, and also adds a test that verifies every
symbol the compiler can reference is available at runtime in the symbol table.
PR Close#24479
When creating content queries from a directive on an element we need to take into account
existing view queries. The same element can be reported to both content and view queries
so freshly created content queries must be combined with pre-existing view queries.
PR Close#24507
This change adds Github edit and view links to methods
and decorator options.
It is possible to add these to properties also but the
UI is rather tight as these are displayed in a table.
PR Close#24000
This heading is too high for the section because the
method name is a H3 but it cannot be a H4 because
usage notes may contain H4 headings.
PR Close#24000
The sections such as methods and decorator options are already headed
by a H3 heading so we need to map the H3 headings in the API doc source
down to H4 headings.
This commit includes general heading mapping functionality accessible via
the `marked` Nunjucks filter.
PR Close#24000
This commit adds new link disambiguators that mean that more
code links can be generated automatically in a sensible way.
The best example is the use of properties within class, interface and
enum documentation.
PR Close#24000
This update allows us to autolink to methods and properties, which
means that we can change things like `{@link transition transition()}`
to just `transition()`.
PR Close#24000
We don't really care when this processor runs as long as it happens
after the tags have been extracted.
By not constraining its `runBefore` property we can ensure that other
processors can be run before it.
PR Close#24000
Because we were "ignoring" these tags they were being
rendered as part of the previous tag.
What we really want to do is know about them, so that we
don't break the doc-gen but then ignore them when rendering.
PR Close#24000
NOTE: This does NOT add parsing of namespaced attributes
- Adds AttributeMarker for namespaced attributes
- Adds test for namespaced attributes
- Updates AttributeMarker enum to use CamelCase, and not UPPER_CASE names
PR Close#24386
This patch ensures that any destination animation styling (state values)
are always applied even if the DOM node is not apart of the DOM.
PR Close#24236
Previously, the transitive scopes of an NgModuleDef were computed
during execution of the @NgModule decorator. This meant that JIT-
compiled modules could only import other JIT-compiled modules, as
the import mechanism relied on the calculation of transitive scopes
to already have happened for the imported module.
This change moves computation of transitive scopes to a function
`transitiveScopesFor` (and makes it lazy). This opens the door for
AOT -> JIT or JIT -> AOT imports, as transitive scopes for AOT
modules can be calculated when needed by JIT, and AOT modules can
also write expressions that call `transitiveScopesFor` when
importing a JIT-compiled module.
PR Close#24334
Two new CircleCI environments are created: test_ivy_jit and test_ivy_aot.
Both run a subset of the tests that have been marked with Bazel tags as
being appropriate for that environment.
Once all the tests pass, builds are published to the *-builds repo both
for the legacy View Engine compiled code as well as for ivy-jit and ivy-aot.
PR Close#24309
This commit includes two changes:
1. It changes the unreliable dynamic way of loading IE polyfills to use
`<script nomodule>` instead - for IE it's equivalent to a regular script tag
while modern browsers will ignore it.
2. It removes other polyfills for browsers not supporting `Object.assign` as
this API is supported by Chrome 45+, Firefox 34+ and Safari 9+ i.e. it's been
supported for some time.
Note that as of June 2018 Googlebot uses Chrome 41 to render sites to be
indexed. Chrome 41 doesn't support `Object.assign` but it also doesn't support
ES6 modules so it'll load polyfills meant for IE - which it should do anyway
as it doesn't support most of ES6.
Fixes#23647
PR Close#24317
Previously the API list was being generated before the stability had
been computed. This meant that the API list page showed no API docs
when filtering by `stable` stability status.
Closes#24329
PR Close#24356
This adds ngtsc/util/src/visitor, a utility for visiting TS ASTs that
can add synthetic nodes immediately prior to certain types of nodes (e.g.
class declarations). It's useful to lift definitions that need to be
referenced repeatedly in generated code outside of the class that defines
them.
PR Close#24230
This will allow RouterTestingModule to better support lazy loading of modules
when using summaries, since it can detect whether a module is already loaded
if it can access the id.
PR Close#24258
Previously only the `description` and `usageNotes` were being copied over
from the call-member of the decorator interface. Important properties such
as `shortDescription` were missed.
These are now added and the code has been refactored to make it simpler and
clearer to update which properties get copied as the requirements change.
PR Close#24289
This patch ensures that if a list of nodes (that contain
animation triggers) are moved around then they will retain their
trigger-value state when animated again at a later point.
PR Close#24238
This change adds to internal API hooks (undocumented API) for
`before/afterPreactivation`. The immediate need for this API is to
allow applications to build support for marshalling navigation between
a web worker and the main application.
Fixes#24202
PR Close#24204
`NgForOf` used to implement `OnChanges` and than use
`ngOnChanges` callback to detect when `ngForOf` binding
changed to update the differ. We now do the checking
manually which puts less pressure on the runtime to do
the bookkeeping and should result in minor perf improvement.
PR Close#23378
Fixes#23023.
When a HTTP Interceptor injects HttpClient it causes a DI cycle. This fix is to use Injector to lazily inject HTTP_INTERCEPTORS while setting up the HttpHandler on the server so as to break the cycle.
PR Close#24229
Fixes#19278.
innerHTML is conservatively marked as an attribute for security purpose so that it's sanitized when set. However this same mapping is used by the server renderer to decide whether the `innerHTML` property needs to be reflected to the `innerhtml` attribute. The fix is to just skip the property to attribute reflection for `innerHTML`.
PR Close#24213
Previously the style encapsulation attributes(_nghost-* and _ngcontent-*) created on the server could overlap with the attributes and styles created by the client side app when it botstraps. In case the client is bootstrapping a lazy route, the client side styles are added before the server-side styles are removed. If the components on the client are bootstrapped in a different order than on the server, the styles generated by the client will cause the elements on the server to have the wrong styles.
The fix puts the styles and attributes generated on the server in a completely differemt space so that they are not affected by the client generated styles. The client generated styles will only affect elements bootstrapped on the client.
PR Close#24158
After #24113 there is 2 `TNode` in those tests:
- 1 for the host,
- 1 for the text node.
The PR #23924 status was green because it branched off master before #24113 was
merged in.
PR Close#24208
Closure Compiler in some configurations complains about duplicate
imports. This change replaces the export-with-import with an export of
the imported symbol.
closes#23993
PR Close#24203
This PR tackles a simple case where ViewRef definition point (<ng-template>) is the
same as the insertion point (ViewContainerRef requested on the said <ng-template>).
For this particular case we can assume that we know a container into which a given
view will be inserted when a view is created. This is not true fall all the possible
cases so follow-up PR will be needed to extend this basic implementation.
PR Close#24179
This commit builds out enough of the JIT compiler to render
//packages/core/test/bundling/todo, and allows the tests to run in
JIT mode.
To play with the app, run:
bazel run --define=compile=jit //packages/core/test/bundling/todo:prodserver
PR Close#24138
Fixes#23280, #23133.
This fix lets code access DOM types like Node, HTMLElement in the code. These are invariant across requests and the corresponding classes from Domino can be safely provided during platform initialization.
This is needed for the current sanitizer to work properly on platform-server. Also allows HTML types in injection - Ex. `@inject(DOCUMENT) doc: Document`.
PR Close#24116
Previously event handlers on the server were setup directly. This change makes it so that the event registration on the server go through EventManagerPlugin just like on client. This allows us to add custom event registration handlers on the server which allows us to hook up preboot event handlers cleanly.
PR Close#24132
In ngIvy directives matching (determining which directives are active based
on a CSS seletor) happens at runtime. This means that runtime needs to have
enough context to match directives. This PR takes care of cases where a directive's
selector should match bindings (ex. [foo]="exp") and event handlers (ex. (out)="do()").
In the mentioned cases we need to have binding / output "attributes" for directive's
CSS selector matching purposes. At the same time those are not regular attributes and
as such should not be reflected in the DOM.
Closes#23706
PR Close#23991
Allows to write:
const fixture = TestBed
.overridePipe(DisplayNamePipe, { set: { pure: false } })
.createComponent(MenuComponent);
when you only want to set the `pure` metadata,
instead of currently:
const fixture = TestBed
.overridePipe(DisplayNamePipe, { set: { name: 'displayName', pure: false } })
.createComponent(MenuComponent);
which forces you to redefine the name of the pipe even if it is useless.
Fixes#24102
PR Close#24103
Bazel has a restriction that a single output (eg. a compiled version of
//packages/common) can only be produced by a single rule. This precludes
the Angular repo from having multiple rules that build the same code. And
the complexity of having a single rule produce multiple outputs (eg. an
ngc-compiled version of //packages/common and an Ivy-enabled version) is
too high.
Additionally, the Angular repo has lots of existing tests which could be
executed as-is under Ivy. Such testing is very valuable, and it would be
nice to share not only the code, but the dependency graph / build config
as well.
Thus, this change introduces a --define flag 'compile' with three potential
values. When --define=compile=X is set, the entire build system runs in a
particular mode - the behavior of all existing targets is controlled by
the flag. This allows us to reuse our entire build structure for testing
in a variety of different manners. The flag has three possible settings:
* legacy (the default): the traditional View Engine (ngc) build
* local: runs the prototype ngtsc compiler, which does not rely on global
analysis
* jit: runs ngtsc in a mode which executes tsickle, but excludes the
Angular related transforms, which approximates the behavior of plain
tsc. This allows the main packages such as common to be tested with
the JIT compiler.
Additionally, the ivy_ng_module() rule still exists and runs ngc in a mode
where Ivy-compiled output is produced from global analysis information, as
a stopgap while ngtsc is being developed.
PR Close#24056
On narrow screens (where there is not enough room on the right to show
the floating ToC), an embedded ToC is shown (via an `<aio-toc embedded>`
element in the document). Since ToC was not a custom element, the
component was not instantiated for the embedded element.
This commit fixes it by making `aio-toc` a custom element and loading it
manually for the floating ToC (if necessary).
PR Close#23944
Short-circuitable expressions (using ternary & binary operators) could not use
the regular binding mechanism as it relies on the bindings being checked every
single time - the index is incremented as part of checking the bindings.
Then for pure function kind of bindings we use a different mechanism with a
fixed index. As such short circuiting a binding check does not mess with the
expected binding index.
Note that all pure function bindings are handled the same wether or not they
actually are short-circuitable. This allows to keep the compiler and compiled
code simple - and there is no runtime perf cost anyway.
PR Close#24039
This commit adds a mechanism by which the @angular/core annotations
for @Component, @Injectable, and @NgModule become decorators which,
when executed at runtime, trigger just-in-time compilation of their
associated types. The activation of these decorators is configured
by the ivy_switch mechanism, ensuring that the Ivy JIT engine does
not get included in Angular bundles unless specifically requested.
PR Close#23833
With `plnkrs`, we used to choose a different plnkr mode (normal vs
embedded) based on the size of the screen. This affected the layout of
the plnkr page ("embedded" plnkr mode was usable on small screens, while
"normal" mode wasn't). This is not to be confused with the live-example
mode we use today to determine whether the live-example should be a link
(that open StackBlitz on a new page) or embedded into the document
(using an iframe).
Since we no longer need to change the live-example URL based on the
screen size, there is no need to listen for rezise events on Window. The
necessary properties can be computed once and certain variables are
obsolete.
PR Close#23960
Previously, it was possible to set the live-example title as content in
the `<live-example>` element. This relied on our custom loader
functionality that extracted the content from the DOM element before
passing it to the Angular compiler and stored it on a property for later
retrieval.
Since we switched to custom elements (and got rid of the custom loader),
the property is no longer populated with the contents. As a result, many
live examples show the default title ("live example") instead of the one
specified as content.
This commit fixes it by projecting the content into an invisible node
for later retrieval (similar to what we do in other components, such as
the `CodeExampleComponent`).
PR Close#23960
Update the example to match the description preceding it, which refers to the
use of the error method and ErrorEvent rather than the flush method with a
non-2xx status as shown previously.
PR Close#22844
Since `versionedFiles` behaves in the exact same way as `files`, there
is no reaason to have both. Users should use `files` instead.
This commit deprecates the property and prints a warning when coming
across an asset-group that uses it. It should be completely removed in
a future version.
Note, it has also been removed from the default `ngsw-config.json`
template in angular/devkit#754.
PR Close#23584
* The member details section is now called "Members", rather
than "Properties".
* The property table now displays appropriate table headings:
"Member", "Value", "Description".
* The "Value" column is not shown if none of the members have
a value.
Closes#22678
PR Close#23872
Closure compiler with type based optimizations has a bug where externs for inherited static fields are not being honored. For Angular Elements this meant that 'observedAttributes' static field which is marked as an extern for the base HTMLElement class was getting renamed.
This commit works around the bug by using quoted access of 'observedAttributes' that explicitly prevents the renaming.
PR Close#23843
Previously these docs always displayed `any` as the type
of the const export. Now the type is computed correctly from
the declared type or initializer of the constant.
PR Close#23850
The recognizer code used to call Object.freeze() on queryParams before
using them to construct ActivatedRoutes, with the intent being to help
avoid common invalid usage. Unfortunately, Object.freeze() works
in-place, so this was also freezing the queryParams on the actual
UrlTree object, making it more difficult to manipulate UrlTrees in
things like UrlHandlingStrategy.
This change simply shallow-copies the queryParams before freezing them.
Fixes#22617
PR Close#22663
This commits changes how clients are added in `SwTestHarness`, so that
the behavior in tests closer mimics what would happen in an actual
ServiceWorker.
It also removes auto-adding clients when calling `clients.get()`, which
could hide bugs related to non-existing clients.
PR Close#23625
Previously, the compileComponent() and compileDirective() APIs still required
the output of global analysis, even though they only read local information
from that output.
With this refactor, compileComponent() and compileDirective() now define
their inputs explicitly, with the new interfaces R3ComponentMetadata and
R3DirectiveMetadata. compileComponentGlobal() and compileDirectiveGlobal()
are introduced and convert from global analysis output into the new metadata
format.
This refactor also splits out the view compiler into separate files as
r3_view_compiler_local.ts was getting unwieldy.
Finally, this refactor also splits out generation of DI factory functions
into a separate r3_factory utility as the logic is utilized between different
compilers.
PR Close#23545
Previously, ngOnDestroy was only called on services which were statically
determined to have ngOnDestroy methods. In some cases, such as with services
instantiated via factory functions, it's not statically known that the service
has an ngOnDestroy method.
This commit changes the runtime to look for ngOnDestroy when instantiating
all DI tokens, and to call the method if it's present.
Fixes#22466Fixes#22240Fixes#14818
PR Close#23755
Prior to this patch, if an element is queried and animated for 0 seconds
(just a style() call and nothing else) then the styles applied would not
be properly cleaned up due to their camelCased nature.
PR Close#23633
When running `yarn start` and `yarn serve-and-sync`, we are usually
more interested in faster re-build times than optimized builds. This was
also the behavior, before upgrading to @angular/cli@6 (fc5af69fb).
This commit introduces a new configuration (`fast`), which is used by
`yarn start` and `yarn serve-and-sync` to restore the faster,
unoptimized builds.
Other commands, such as `ng serve` and `ng e2e`, remain unchanged (using
slower, optimized builds).
PR Close#23569
Fix a corner case where eager providers were getting constructed twice if the provider was requested before the initialization of the NgModule is complete.
PR Close#23559
g3 and the Angular repo have different versions of TypeScript, and
ts.updateIdentifier() has a different signature in the different versions.
There is no way to write a call to the function that will compile in both
versions simultaneously.
Instead, use ts.getMutableClone() as that has the same effect of cloning
the identifier.
PR Close#23550
This commit adds a new compiler pipeline that isn't dependent on global
analysis, referred to as 'ngtsc'. This new compiler is accessed by
running ngc with "enableIvy" set to "ngtsc". It reuses the same initialization
logic but creates a new implementation of Program which does not perform the
global-level analysis that AngularCompilerProgram does. It will be the
foundation for the production Ivy compiler.
PR Close#23455
`ng.performCompilation` can return an `undefined` program, which is not handled by ngc-wrapped.
Avoid crashing by checking for the error return and returning the diagnostics.
PR Close#23468
Temporary workaround for angular/angular-cli#10398.
The behavior of `yarn build` remains the same, but building for a
specific deployment env (e.g. archive, next) requires
`yarn build-for $deployEnv`.
PR Close#23470
The bug fixed here steams from the fact that we are traversing too far up
in the views tree hierarchy in the destroyViewTree function.
The logic in destroyViewTree is off if we start removal at an embedded view
without any child views. For such a case we should just clean up (cleanUpView)
this one view without paying attention to next / parent views.
PR Close#23482
This uses a new script and CircleCI job called "build-packages-dist"
which shims the new Bazel build to produce outputs matching the legacy
build. We'll use this to get AIO testing onto CircleCI as well.
We move the integration tests to a new circleCI job that depends on this
one, as well as the build publishing job.
Note that every PR will have a trivial green publishing status, because
we always create this job even for PRs. We'd rather not - see
https://discuss.circleci.com/t/workflows-pull-request-filter/14396/4
PR Close#23512
When asking the route reuse strategy to retrieve a detached route handle, store the
return value in a local variable for further processing instead of asking again later.
resolves#22474
PR Close#22475
A long time ago Angular used to support both those attribute notations:
- `*attr='binding'`
- `template=`attr: binding`
Because the last notation has been dropped we can refactor the binding parsing.
Source maps will benefit from that as no `attr:` prefix is added artificialy any
more.
PR Close#23460
In certain cases seen in production, simplify() can returned
undefined when simplifying decorator metadata. This has proven tricky
to reproduce in an isolated test, but the fix is simple and low-risk:
don't attempt to spread an undefined set of annotations in the first
place.
PR Close#23349
This patch is in response to #23401 where a non-const enum was being
compiled as an empty object when used in an animation player when
`ng build --prod` was being processed. This patch is a immediate fix
for the issue and #23400 tracks it.
Closes#23401
PR Close#23402
Previously, we were running the e2e tests from master against
`https://angular.io` (deployed from the stable branch). Often the e2e
tests from master do not apply to the stable branch, since the app has
deviated slightly.
This commit fixes this by stop running the full e2e tests against the
deployed versions, but a smaller set of "smoke tests", which check basic
functionality that is less likely to change between versions.
PR Close#23390
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an opaque token.
For this reson why declare the return value of `defineInjectable` as `never`.
PR Close#23383
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an `OpaqueToken`.
By prefixing the type with `ɵ` we are communicating the the outside world that
the value is not public API and is subject to change without backward compatibility.
PR Close#23371
- Remove default injection value from `inject` / `directiveInject` since
it is not possible to set using annotations.
- Module `Injector` is stored on `LView` instead of `LInjector` data
structure because it can change only at `LView` level. (More efficient)
- Add `ngInjectableDef` to `IterableDiffers` so that existing tests can
pass as well as enable `IterableDiffers` to be injectable without
`Injector`
PR Close#23345
This change changes:
- compiler uses `directiveInject` instead of `inject` for `Directive`s
- unifies the flags in `di` as well as `render3`
- changes the signature of `directiveInject` to match `inject` In prep for #23330
- compiler now generates flags for injection.
Compiler portion of #23342
Prep for #23330
PR Close#23345
In [glob patterns][1], the `*` wildcard is supposed to match 0 or more
characters.
For reference:
- This is also how `*` works in other implementations, such as
`.gitignore` files or Firebase hosting config.
- Some popular JS implementations (e.g. [minimatch][2], [micromatch][3])
work differently, matching 1 or more character (but not 0).
This commit "fixes" the minimal glob support in
`@angular/service-worker` to allow `*` to also match 0 characters.
[1]: https://en.wikipedia.org/wiki/Glob_%28programming%29
[2]: https://www.npmjs.com/package/minimatch
[3]: https://www.npmjs.com/package/micromatch
PR Close#23339
The ServiceWorker will redirect navigation requests that don't match any
`asset` or `data` group to the specified index file. The rules for a
request to be classified as a navigation request are as follows:
1. Its `mode` must be `navigation`.
2. It must accept a `text/html` response.
3. Its URL must match certain criteria (see below).
By default, a navigation request can have any URL except for:
1. URLs containing `__`.
2. URLs to files (i.e. containing a file extension in the last path
segment).
While these rules are fine in many cases, sometimes it is desirable to
configure different rules for the URLs of navigation requests (e.g.
ignore specific URLs and pass them through to the server).
This commit adds support for specifying an optional `navigationUrls`
list in `ngsw-config.json`, which contains URLs or simple globs
(currently only recognizing `!`, `*` and `**`).
Only requests whose URLs match any of the positive URLs/patterns and
none of the negative ones (i.e. URLs/patterns starting with `!`) will be
considered navigation requests (and handled accordingly by the SW).
(This is an alternative implementation to #23025.)
Fixes#20404
PR Close#23339
These files are in the UMD format for greater portablity, and as such
can't be marked as side-effect-free by webpack/build-optimizer/uglify.
PR Close#23366
The service injected is `ValueService`, however the name of the variable
does not reflect that. It's actually confusing since it's the name of
the `class` being created.
PR Close#23315
CLI will soon consider the first entry to be the main entry in the package group.
This will then be used to display the main entry in "ng update" listing.
PR Close#23303
This processor will enable us to write rules about
how the content should appear, such as:
* no headings in markdown content
* only one sentence per line
* no single character parameter names
* etc.
PR Close#22759
Detect server environment by checking `typeof window` and schedule render immediately instead of waiting for RAF.
This does not make Angular Elements work on platform-server. This is just the first step.
PR Close#23324
All our package labels are `npm_package` so the bazel build reports a bunch of identical actions running, like
```
Angular Packaging: rolling up npm_package; 31s darwin-sandbox
Angular Packaging: rolling up npm_package; 30s darwin-sandbox
Angular Packaging: rolling up npm_package; 29s darwin-sandbox
Angular Packaging: rolling up npm_package; 27s darwin-sandbox
Angular Packaging: rolling up npm_package; 26s darwin-sandbox
Angular Packaging: rolling up npm_package; 23s darwin-sandbox
Angular Packaging: rolling up npm_package; 19s darwin-sandbox
Angular Packaging: rolling up npm_package; 11s darwin-sandbox
```
PR Close#23318
The 'stringify' function prints an object as [Object object] which
is not very helpful in many cases, especially in a diagnostics
message. This commit changes the behavior to pretty print an object.
PR Close#22689
When compiling templates the compiler would often bind to
closest context rather than the component context.
The only time one should be binding to the cont component is
in explicit cases where the inner template declares local variable.
PR Close#23168
Given
```
<div *ngFor=”…” (click)=“doSomething()”>
```
Before `doSomething` would execute on the inner template context, which
is incorrect. The correct behavior is to execute on the top level context
of the component.
PR Close#23168
rxjs 6.0.0 breaks strictMetadataEmit as they now publish a .d.ts file with a
structure like:
declare export class Subscription {
static EMPTY: Subscription;
}
This generates metadata which contains an error, and fails the strictMetadataEmit
validation. There is nothing a library author can do in this situation except to
set strictMetadataEmit to false.
The spirit of strictMetadataEmit is to validate that the author's library doesn't
do anything that will break downstream users. This failure is a corner case which
causes more harm than good, so this commit disables validation for metadata
collected from .d.ts files.
Fixes#22210
PR Close#23275
Lowering expressions in flat module metadata is desirable, but it won't
work without some rearchitecting. Currently the flat module index source
is added to the Program and therefore must be determined before the rest
of the transforms run. Since the lowering transform changes the set of
exports needed in the index, this creates a catch-22 in the index
generation.
This commit causes the flat module index metadata to be generated using
only those transforms which are "safe" (don't modify the index).
PR Close#23226
As we no longer create native (RNode) comment nodes for containers,
we need to execute logic for finding a next sibiling node with RNode
when inserting a view.
The mentioned logic need to be updated for the case of dynamically
created containers (LContainerNode). Indeed, we need to be able to
descend into dynamically inserted views while looking for a RNode.
To achieve this we need to have a pointer from a host LNode to a
dynamically created LContainerNode).
PR Close#23193
- add paralelization of the build
- correct issues with picking up targets from /dist and /aio/node_modules/
- add logging during the publish process
PR Close#23206
Previously, it was necessary to attach on of the three "stability"
jsdoc tags (`@stable`, `@deprecated` or `@experimental`) to each
public API export.
To ensure that the public API was correctly tagged, the `ts-api-guardian`
would check that one of these tags appeared on every public export.
Now the doc-gen is able to compute that a code item is stable if
it does not contain the `@experimental` nor `@deprecated` tags.
Therefore there is no need to provide the `@stable` tag any more; and
this tag has now been marked as deprecated - i.e. it should not be used.
The ts-api-guardian has been modified in this commit so that it no longer
warns/fails if the `@stable` is missing.
PR Close#23176
In pipes the content of these tags is now generated automatically.
In directives these tags have been converted to `@usageNotes` tags,
but in the future me might find a way to generate that usage too.
PR Close#23062
The `custom-elements` guide page was renamed to `elements` in ff34d5ea7.
That commit also added a new nav item for the renamed file, so this item is
no longer valid.
PR Close#23175
- properly display initial checked state
- properly remove a todo
Please note that the 'archive' option still doesn't
work correctly as listening to component outputs doesn't
seem to work (onArchive() is never called).
PR Close#23161
Currently, the flat module index metadata is produced directly from
the source metadata. The compiler, however, applies transformations
on the Typescript sources during transpilation, and also equivalent
transformations on the metadata itself. This transformed metadata
doesn't end up in the flat module index.
This changes the compiler to generate the flat module index metadata
from its transformed version instead of directly from source.
PR Close#23129
Computing the value of loadChildren does not work externally, as the CLI
needs to be able to detect the paths referenced to properly set up
codesplitting. However, internally, different approaches to codesplitting
require hashed module IDs, and the computation of those hashes involves
something like:
{path: '...', loadChildren: hashFn('module')}
ngc should lower loadChildren into an exported constant in that case.
This will never break externally, because loadChildren is always a
string externally, and a string won't get lowered.
PR Close#23088
Currently the context for inject() is only set when the token is seen
for the first time. This has two issues:
* It should always be set when injecting from that injector, because
a constructor may wish to call inject() directly.
* If an NgModuleFactory is .create()'d twice, and an ngInjectableDef
token is requested from each of them, the second time will fail.
This is because the first injection adds the provider definition
and calls the factory, and the provider definitions are shared.
The second injector will see the provider definition and call the
factory to create an instance, but without setting the correct
context for inject().
Fixes angular/material2#10586.
PR Close#23148
Remove `containerRefreshStart` and `containerRefreshEnd` instruction
from the output.
Generate directives as a list in `componentDef` rather than inline into
instructions. This is consistent in making selector resolution runtime
so that translation of templates can follow locality.
PR Close#22921
This commit configures a periodic job to be run on CircleCI, performing several
checks against the actual apps deployed to production (https://angular.io) and
staging (https://next.angular.io).
Fixes#21942
PR Close#22483
This commit also waits for the app to stabilize, before starting to
check for ServiceWorker updates. This avoids setting up a long timeout,
which would prevent the app from stabilizing and thus cause issues with
Protractor.
PR Close#22483
This commit modifies the compilation to emit metadata.json files when
compiled under Blaze. The default behavior of ngc is to emit metadata
only when the --flatModuleOutFile flag is specified, but this mode
is not used in Blaze.
Emitting metadata for individual Angular components is needed for
Angular Language Service to work with projects compiled with Blaze.
PR Close#23049
Under some circumstances (possibly related to opening Chrome DevTools),
requests are made with `cache: 'only-if-cached'` and `mode: 'no-cors'`.
These request will eventually fail, because `only-if-cached` is only
allowed to be used with `mode: 'same-origin'`.
This is likely a bug in Chrome DevTools.
This commit avoids errors related to such requests by not handling them.
Fixes#22362
PR Close#22883
Previously, when trying to fetch `ngsw.json` (e.g. during
`checkForUpdate()`) while either the client or the server were offline,
the ServiceWorker would enter a degrade mode, where only existing
clients would be served. This essentially meant that the ServiceWorker
didn't work offline.
This commit fixes it by differentiating offline errors and not entering
degraded mode. The ServiceWorker will remain in the current mode until
connectivity to the server is restored.
Fixes#21636
PR Close#22883
In Ivy mode we rewrite references to Injector to INJECTOR in ngInjectableDef, to fix tree-shaking.
This changes the rewrite to happen always, even in non-Ivy mode, and makes Angular understand
INJECTOR across the board at runtime.
PR Close#23008
This allows a bundle index to be re-exported by a higher-level module without fear of collisions.
Under bazel, we always set the prefix to be underscore-joined workspace, package, label
PR Close#23007
The commit command will fail if the commit message header does not follow the
Angular convetions as defined in /CONTRIBUTING.md.
You can force the commit by adding the `--no-verify` option.
NOTE:
You should remove all unused hooks (in <angular>/.git/hooks) before running
`yarn` so that husky hooks are installed correctly.
PR Close#22969
Previously, @Injectable() would generate an ngInjectableDef on the type it was
decorating, even if that type already had a compiled ngInjectableDef, overwriting
the compiled version.
PR Close#22943
Also switch our CircleCI commands to just
bazel build //...
bazel test //...
as this is easier to understand.
Note, the reason this commit removes `firebase-tools` is:
1) firebase-tools has an optional dependency on
https://www.npmjs.com/package/@google-cloud/functions-emulator
2) yarn's `--ignore-optional` doesn't work for transitive deps, so
there's no way to yarn install without getting that functions-emulator
package
3) functions-emulator has a transitive dep on `grpc`
4) the version of `grpc` we get has `BUILD` files and no `WORKSPACE`
file so it always breaks `bazel build ...`
It could be solved by any of:
1) remove firebase-tools - this is what I did
2) fix yarn so you can omit optional deps of a transitive dep
3) make functions-emulator depend transitively on a more recent `grpc`
version
4) patch `grpc` after install by doing an `rm` command in our
postinstall or something
In its place we must install protobufjs. This is needed by the
ngc-wrapped test, which needs jasmine as well as bazel's worker mode
dependencies, and therefore cannot simply rely on
node_modules =
"@build_bazel_rules_typescript_tsc_wrapped_deps//:node_modules"
PR Close#22168
This avoids the need to run bazel run :install instead of yarn install.
We merge the devDependencies of ts-api-guardian into the root package.json file.
PR Close#22894
This patch ensures that if a numeric state name value in an animation
is detected then it will not throw an error. Normally this wouldn't
occur, but some JS optimizers may convert a quoted numeric value
(like "1" to 1) in some cases to save space. This patch makes sure
that Angular doesn't throw an error when this occurs.
PR Close#22923
I added this option for demos, so that it would be easier to see a graphviz graph of the dependency structure without all the node_modules edges.
However, `ibazel` picks up this option as well, and means it doesn't trigger on changes that only appear through an implicit dependency.
PR Close#22912
Using `-—define` causes bazel to bust the cache which means that doing
`bazel test target` followed by `bazel run -—define UPDATE_GOLDEN=1 target` will
cause caches to be invalidated and house full rebuild.
PR Close#22913
ngc knows to filter out d.ts inputs, but the logic accidentally
depended on whether it had a previous Program lying around.
Fixing that logic puts ngc on the fast code path, but in that code
path it must be able to merge tsickle EmitResults, so we need to
plumb the tsickle.mergeEmitResults function through all the intervening
APIs. The bulk of this change is that plumbing.
PR Close#22899
'remove' method not removing url from state.map
'accessed' method not removing 'previous' reference from existing node when it becomes the head
Fixes#22218Fixes#22768
PR Close#22769
Newer version of TS is stricter about types and flags counter-variant
types in some situations. This change inlines the DirectiveDefArgs
into the arguments which:
1) removes the inheritance which caused the issue and
2) Makes it more friendly to IDEs since they will not report comments.
Closes#22877Closes#22843
PR Close#22897
This lets projects like Material change ng_package "bundle index" files to non-conflicting paths
Currently packages like @angular/core ship with the generated metadata
in a path like 'core.js' which overwrites one of the inputs.
Angular material puts the generated file in a path like 'index.js'
Either way these files generated by ng_module rules have the potential
to collide with inputs given by the user, which results in an error.
Instead, give users the freedom to choose a different non-conflicting name.
Also this refactors the ng_package rule, removing the redundant
secondary_entry_points attribute.
Instead, we assume that any ng_module in the deps with a module_name
attribute is a secondary entry point.
PR Close#22814
Changes would not propagate to a value in downgraded component in case you had two-way binding and listening to a value-change, e.g. [(value)]="value" (value-change)="fetch()"
Closes#22734
PR Close#22772
This adds compilation of @NgModule providers and imports into
ngInjectorDef statements in generated code. All @NgModule annotations
will be compiled and the @NgModule decorators removed from the
resultant js output.
All @Injectables will also be compiled in Ivy mode, and the decorator
removed.
PR Close#22458
Moves the status reporting from the issue #21706 to a file that
can be updated as changes are being made. This addresses one of the
comments on the issue and allows better tracking of updates to this
status and changes made.
PR Close#22751
This flag is picked up by webpack v4 and used for more agressive optimizations.
Our code is already side-effect free, because that's what we needed for build-optimizer to work.
PR Close#22785
BREAKING CHANGE:
The `<template>` tag was deprecated in Angular v4 to avoid collisions (i.e. when
using Web Components).
This commit removes support for `<template>`. `<ng-template>` should be used
instead.
BEFORE:
<!-- html template -->
<template>some template content</template>
# tsconfig.json
{
# ...
"angularCompilerOptions": {
# ...
# This option is no more supported and will have no effect
"enableLegacyTemplate": [true|false]
}
}
AFTER:
<!-- html template -->
<ng-template>some template content</ng-template>
PR Close#22783
Angular Package Format v6 stops bundling files in the esm5 and esm2015
directories, now that Webpack 4 can tree-shake per-file.
Adds some missing files like package.json to make packages closer to
what we publish today.
Refactor ng_package to be a type of npm_package and re-use the packaging
action from that rule.
PR Close#22782
Works around an issue with TypeScript 2.6 and 2.7 that causes
the tranformer emit to emit incorrect escapes for css string
literals.
Fixes: #22774
PR Close#22776
It was running too late and so was being confused by the
description being split into `shortDescription` and `description`
properties.
Closes#22748
PR Close#22770
This change adds:
* an impure badge for Pipes that are marked as `pure: false`
* a pipe specific overview that shows the syntax for using a pipe in a template.
* an "input value" section describing the type of the value that the pipe expects.
* a "pipe params" section describing any additional params that a pipe expects.
PR Close#22702
Adds a stub for `elementStyle` and `elementClass` instruction
with a canonical spec for the compiler. The spec shows the the
compiler should be using `elementStyle` and `elementClass` instruction
in place of `[class]` and `[style]` bindings respectively.
PR Close#22719
Rename:
- `elementClass` (short: `k`) => `elementClassNamed` (short: `kn`)
- `elementStyle` (short: `s`) => `elementStyleNamed` (short: `sn`)
Currently `[class.name]` is `elementClass(0, ‘name’, value)`. We would
like to introduce new binding `[class]` which needs a new instruction
ideally `elementClass(0, value)`. Doing the rename creates space
to create such an instruction in subsequent change.
PR Close#22719
This patch removes the deprecated support for animation
symbol imports from @angular/core.
BREAKING CHANGE: it is no longer possible to import
animation-related functions from @angular/core. All
animation symbols must now be imported from @angular/animations.
PR Close#22692
This commit fixes a bug that would result in views insert / remove
even if a view needed only refresh operation.
The crux of the bug was that we were looking for a view to update
only in the LContainer.nextIndex position. This is incorrect as a
view with a given block id could be present later in the views
array (this happens if we about to remove a view in the middle of
the views array).
The code in this fix searches for a view to update in the views array and
can remove views in the middle of the views collection. Previously we
would remove views at the end of the collection only.
PR Close#22656
The `Logger.error()` method now only accepts a single `Error` parameter
and passes this through to the error handler.
This allows the error handler to serialize the error more accurately.
The various places that use `Logger.error()` have been updated.
See #21943#issuecomment-370230047
PR Close#22713
Allow passing an optional timeout to Testability's whenStable(). If
specified, if Angular is not stable before the timeout is hit, the
done callback will be invoked with a list of pending macrotasks.
Also, allows an optional update callback, which will be invoked whenever
the set of pending macrotasks changes. If this callback returns true,
the timeout will be cancelled and the done callback will not be invoked.
If the optional parameters are not passed, whenStable() will work
as it did before, whether or not the task tracking zone spec is
available.
This change also migrates the Testability unit tests off the deprecated
AsyncTestCompleter.
PR Close#16863
The new rollup rule disables inlining symbols in debug mode. This makes
it look as if there would be more symbols but in reality these are the
symbols which are no longer being inlined.
PR Close#22747
Rename @Injectable({scope -> providedIn}).
Instead of {providedIn: APP_ROOT_SCOPE}, accept {providedIn: 'root'}.
Also, {providedIn: null} implies the injectable should not be added
to any scope.
PR Close#22655
Closure has a transformation which turns:
Service.ngInjectableDef = ...;
into:
Service$ngInjectableDef = ...;
This transformation obviously breaks Ivy in a major way. The solution is
to annotate the fields as @nocollapse. However, Typescript appears to ignore
synthetic comments added to a node during a transformation, so the "right"
way to add these comments doesn't work.
As an interim measure, a post-processing step just before the compiled JS is
written to disk appends the correct comments with a regular expression.
PR Close#22691
Previously the flag would only disable the check in the case we tried to use newer tsc version.
In g3 we sometimes take a while to update tsc, but as a prerequisite of that Angular needs to be
updated first. This change enables us to update Angular and use it in g3 while g3 is being update
to the required tsc. Of course extra care is required when this check is disabled, but since we
control everything in g3, it's on us to get this right.
I don't see any preexisting tests for this, and I'm not sure how to write them right now.
I filed https://github.com/angular/angular/issues/22699
PR Close#22669
This is not expected to be a breaking change for anyone who's on Node LTS (currently v8)
and aligns @angular/compilar-cli with @angular/cli's runtime requirements.
PR Close#22669
When the compiler generates a reference to an exported variable in the
same file, it inserts a synthetic ts.Identifier node. In CommonJS
output, this synthetic node would not be properly rewritten with an
`exports.` prefix.
This change sets the TS original node property on the synthetic node
we generate, which ensures TS knows to rewrite it in CommonJS output.
PR Close#22564
When angularCompilerOptions { enableResourceInlining: true }, we replace all templateUrl and styleUrls properties in @Component with template/styles
PR Close#22615
We now create npm packages to cover all the public api assertions in tools/public_api_guard.
We no longer depend on ts-api-guardian from npm - it is now stale since the repository was archived.
There is no longer a gulp task to enforce or accept the public API, this is in CircleCI as part of running all bazel test targets.
PR Close#22639
Produces back-patch as described in the #22235 and referenced in #22480.
This just contains the compiler implementations and the corresponding unit
tests. Connecting the dots as described in #22480 will be in a follow on
change.
PR Close#22506
BREAKING CHANGE: after this change, npm and yarn will issue incompatible peerDependencies warning
We don't expect this to actually break an application, but the application/library package.json
will need to be updated to provide tslib 1.9.0 or higher.
PR Close#22667
Support for using the `ngModel` input property and `ngModelChange`
event with reactive form directives has been deprecated in
Angular v6 and will be removed in Angular v7.
Now deprecated:
```html
<input [formControl]="control" [(ngModel)]="value">
```
```ts
this.value = 'some value';
```
This has been deprecated for a few reasons. First, developers have
found this pattern confusing. It seems like the actual `ngModel`
directive is being used, but in fact it's an input/output property
named `ngModel` on the reactive form directive that simply approximates
(some of) its behavior. Specifically, it allows getting/setting the
value and intercepting value events. However, some of `ngModel`'s other
features - like delaying updates with`ngModelOptions` or exporting the
directive - simply don't work, which has understandably caused some
confusion.
In addition, this pattern mixes template-driven and reactive forms
strategies, which we generally don't recommend because it doesn't take
advantage of the full benefits of either strategy. Setting the value in
the template violates the template-agnostic principles behind reactive
forms, whereas adding a FormControl/FormGroup layer in the class removes
the convenience of defining forms in the template.
To update your code before v7, you'll want to decide whether to stick
with reactive form directives (and get/set values using reactive forms
patterns) or switch over to template-driven directives.
After (choice 1 - use reactive forms):
```html
<input [formControl]="control">
```
```ts
this.control.setValue('some value');
```
After (choice 2 - use template-driven forms):
```html
<input [(ngModel)]="value">
```
```ts
this.value = 'some value';
```
You can also choose to silence this warning by providing a config for
`ReactiveFormsModule` at import time:
```ts
imports: [
ReactiveFormsModule.withConfig({warnOnNgModelWithFormControl: 'never'});
]
```
Alternatively, you can choose to surface a separate warning for each
instance of this pattern with a config value of `"always"`. This may
help to track down where in the code the pattern is being used as the
code is being updated.
Note: `warnOnNgModelWithFormControl` is set up as deprecated so that it
can be removed in v7 when it is no longer needed. This will not display
properly in API docs yet because dgeni doesn't yet support deprecating
properties in object literals, but we have an open issue to resolve the
discrepancy here: https://github.com/angular/angular/issues/22640.
PR Close#22633
By providing a top level sanitization methods (rather than service) the
compiler can generate calls into the methods only when needed. This makes
the methods tree shakable.
PR Close#22540
docs(aio): change HttpClientModule reference to HttpClient
docs(aio): capitalize Http to HTTP
docs(aio): fix typo mistake in 'universal' guide
docs(aio): gets rid of the parentheses and the "e.g." in 'universal' guide
PR Close#21984
Previously only export docs were displaying a short description.
Now methods in classes and interfaces also compute and render
the short description.
Closes#22500
PR Close#22583
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on RFC 3986 and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* URI fragments will now serialize the same as query strings
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
Fixes: #10280
PR Close#22337
Previously the doc-viewer would insert an embedded `<aio-toc>` element
into the DOM directly after the H1 element. Now it will not do this
if there is already a such element in the doc contents.
This allows the content-author/template-developer to position the ToC
for specific cases.
PR Close#22570
The previous approach just removed the first `a` tag that
was found, but now that the header-link anchor is not at
the start of the heading, it could fail.
Closes#22493
PR Close#22533
Also use it to test the public API for core and common
Once we have an ng_package for every package, we can remove
the npm dependency on ts-api-guardian and the gulp-based
public api check.
PR Close#22544
When I enabled bazel remote caching, I also switched to running
buildifier and skylint from the package.json script, which builds them
from head. With remote caching, we do get cache hits for these, but
looking up the action inputs actually takes quite a bit of time since we
have to first fetch the remote repository, then do loading and
analysis, then read the inputs to determine the cache key.
It's more important to keep the lint job fast, so I'm reverting that
part of the change for now. We can experiment with building them from
head in a less critical repo.
PR Close#22526
Previously the injectable compiler assumed all tree-shakeable injectables
would have dependencies that were injectables or InjectionTokens. However
old code still uses string tokens (e.g. NgUpgrade and '$injector'). Using
such tokens would cause the injectable compiler to crash.
Now, the injectable compiler can properly generate a dependency on such a
string token.
PR Close#22376
The new version of `dgeni-packages/typescript` no longer strips
out "namespaces" from types, which was part of the problem of
not autolinking correctly to `HttpEventType.Response`.
Another part of the problem was that we did not include `.`
characters when matching potential code blocks for auto-linking,
which precluded properties of enums from being linked.
Finally, members we not being given a `path` property, which is
needed to effectively autolink to them. This is now set in
the `simplifyMemberAnchors` processor.
Closes#21375
PR Close#22494
The `exampleMap` needs to hold an hash object for each
of the `collectExamples.exampleFolders` paths.
Previously these hash objects were only created if there
was actually an example file the hash's respective
example folder. This could cause crashes during
`yarn docs-watch` (and so also `yarn sync-and-serve`)
if no examples were read in for a particular run of
the doc-gen.
PR Close#22502
"ng update" supports having multiple packages as part of a group which should be updated together, meaning that e.g. calling "ng update @angular/core" would be equivalent to updating all packages of the group (that are part of the package.json already).
In order to support the grouping feature, the package.json of the version the user is updating to needs to include an "ng-update" key that points to this metadata.
The entire specification for the update workflow can be found here: 2e8b12a4ef/docs/specifications/update.md
PR Close#22482
inject() supports the ngInjectableDef-based configuration of the injector
(otherwise known as tree-shakeable services). It was missing from the
exported API of @angular/core, this PR adds it.
The test added here is correct in theory, but may pass accidentally due
to the decorator side-effect replacing the inject() call at runtime. An
upcoming compiler PR will strip reified decorators from the output
entirely.
Fixes#22388
PR Close#22389
* The first paragraph is now split off into the `shortDescription` property.
* Usage of `howToUse` and `whatItDoes` have been updated.
* The "Overview" heading for class is removed as it is self-evident
* The original horizontal rule styling below the main heading is removed as not part of the new design
Closes#22385
PR Close#22401
Previously, when a downgraded component was destroyed in a way that did
not trigger the `$destroy` event on the element (e.g. when a parent
element was removed from the DOM by Angular, not AngularJS), the
`ComponentRef` was not destroyed and unregistered.
This commit fixes it by listening for the `$destroy` event on both the
element and the scope.
Fixes#22392
PR Close#22400
This approach simplifies the styling needed considerably.
Previously, we had to make room on the left for heading that
are in visual containers. Also we had to apply a `float:right`
when on narrow screens as the gutter not available then.
This float didn't render nicely if the heading text was longer
than could be rendered on a single line.
Closes#22131
This also prevents some extra `<a>` elements inserted by the browser's
trying to fix the HTML structure, which also fixes the `.header-link`
added in ToC.
Fixes#22387Closes#22437
PR Close#22446
The h3 element is overflowing over its surrounding div element. Modified padding-right to align consistently with the remainder of div contents.
fixes: #22407
PR Close#22431
The h3 element is overflowing over its surrounding div element. Modified padding-left to align consistently with the remainder of div contents.
fixes: #22407
PR Close#22431
* Add correct mapping from camel case to kebab case for CSS style
names
* Remove internal CSS methods in favor of native Domino APIs
Fixes#19235
PR Close#22263
- updates tests
- heavy prose revisions
- uses HttpClient (with angular-in-memory-web-api)
- test HeroService using `HttpClientTestingModule`
- scrub away most By.CSS
- fake async observable with `asyncData()`
- extensive Twain work
- different take on retryWhen
- remove app barrels (& systemjs.extras) which troubled plunker/systemjs
- add dummy export const to hero.ts (plunkr/systemjs fails w/o it)
- shrink and re-organize TOC
- add marble testing package and tests
- demonstrate the "no beforeEach()" test coding style
- add section on Http service testing
- prepare for stackblitz
- confirm works in plunker except excluded marble test
- add tests for avoidFile class feature of CodeExampleComponent
PR Close#20697
Now the overview groups the members in the following order:
* static properties
* static methods
* constructor
* instance properties
* instance members
Closes#22132
PR Close#22438
The function provided by `ngUpgrade` as `parentBoundTranscludeFn` when
upgrading a component with transclusion, will break in AngularJS v1.5.8+
if no transclusion content is provided. The reason is that AngularJS
will try to destroy the transclusion scope (which would not be needed
any more). But since the transcluded content comes from Angular, not
AngularJS, there is no transclusion scope to destroy.
This commit fixes it by providing a dummy scope object with a no-op
`$destroy()` method.
Fixes#22175
PR Close#22167
Previously, having a `=` binding on an upgraded components would result
in setting the corresponding property to an EventEmitter function. This
should only happen for `&` bindings.
This commit rstrores the correct behavior.
Note:
The issue was only present in the dynamic version of `ngUpgrade`. The
static version worked as expected.
The error did not show up in tests, because in AngularJS v1.5.x a
function would be serialized to an empty string in interpolations, thus
making them indistinguishable from uninitialized properties (in the
view). The serialization behavior changed in AngularJS v1.6.x, making
the errors visible.
PR Close#22167
`packages/upgrade/static/src` is anymlink to `packages/upgrade/src`.
Still, using the correct paths (e.g. using
`@angular/upgrade/static/src/...` for `@angula/upgrade/static` specs
ensures that the module loader (e.g. SystemJS) can map the imports to
the same instances.
PR Close#22167
The utility functions `formatNumber`, `formatPercent`, `formatCurrency`, and `formatDate` used by the number, percent, currency and date pipes are now available for developers who want to use them outside of templates.
Fixes#20536
PR Close#22423
Fixes: #10280
This change brings Angular largely in line with how AngularJS previously serialized URLs. This is based on [RFC 3986](http://tools.ietf.org/html/rfc3986) and resolves issues such as the above #10280 where URLs could be parsed, re-serialized, then parsed again producing a different result on the second parsing.
Adjustments to be aware of in this commit:
* Query strings will now serialize with decoded slash (`/`) and question mark (`?`)
* URI fragments will now serialize the same as query strings, but hash sign (`#`) will also appear decoded
* In the URI path or segments (portion prior to query string and/or fragment), the plus sign (`+`) and ampersand (`&`) will appear decoded
* In the URL path or segments, parentheses values (`(` and `)`) will now appear percent encoded as `%28` and `%29` respectively
* In the URL path or segments, semicolons will be encoded in their percent encoding `%3B`
NOTE: Parentheses and semicolons denoting auxillary routes or matrix params will still appear in their decoded form -- only parentheses and semicolons used as values in a segment or key/value pair for matrix params will be encoded.
While these changes are not considered breaking because applications should be decoding URLs and key/value pairs, it is possible that some unit tests will break if comparing hard-coded URLs in tests since that hard coded string will represent the old encoding. Therefore we are releasing this fix in the upcoming Angular v6 rather than adding it to a patch for v5.
PR Close#22337
This produces a directory following the Angular Package layout spec.
Includes integration test coverage by making a minimal ng_package in integration/bazel.
Unit tests verify the content of the @angular/core and @angular/common packages.
This doesn't totally match our current output, but is good enough to unblock some
early adopters.
It re-uses logic from the rollup_bundle rule in rules_nodejs. It should also
eventually have the .pack and .publish secondary targets like npm_package rule.
PR Close#22221
It's currently broken on CircleCI because of a TLS change made by GitHub.
This is okay as a permanent change, we don't really want bazel to fetch a full git history.
Fixes#22405
PR Close#22406
This patch removes the need to include the Web Animations API Polyfill
(web-animations-js) as a dependency. Angular will now fallback to using
CSS Keyframes in the event that `element.animate` is no longer supported
by the browser.
In the event that an application does use `AnimationBuilder` then the
web-animations-js polyfill is required to enable programmatic,
position-based access to an animation.
Closes#17496
PR Close#22143
Change recommendation on using attributes for components since there are use cases including the use of <button mat-button> in MD
Closes#19401.
PR Close#22074
closes#17958
BREAKING CHANGE:
- `AbstractControl#statusChanges` now emits an event of `'PENDING'` when you call `AbstractControl#markAsPending`
- Previously it did not emit an event when you called `markAsPending`
- To migrate you would need to ensure that if you are filtering or checking events from `statusChanges` that you account for the new event when calling `markAsPending`
PR Close#20212
This patch ensures that if the NoopAnimationsModule is used then it will
correctly report the associated `totalTime` property within the emitted
AnimationEvent instance when an animation event trigger is fired.
BREAKING CHANGE: When animation is trigged within a disabled zone, the
associated event (which an instance of AnimationEvent) will no longer
report the totalTime as 0 (it will emit the actual time of the
animation). To detect if an animation event is reporting a disabled
animation then the `event.disabled` property can be used instead.
PR Close#22225
InjectionToken can be created with an ngInjectableDef, and previously
this allowed the full expressiveness of @Injectable. However, this
requires a runtime reflection system in order to generate factories
from expressed provider declarations.
Instead, this change requires scoped InjectionTokens to provide the
factory directly (likely using inject() for the arguments), bypassing
the need for a reflection system.
Fixes#22205
PR Close#22207
@Injectable() supports a scope parameter which specifies the target module.
However, it's still difficult to specify that a particular service belongs
in the root injector. A developer attempting to ensure that must either
also provide a module intended for placement in the root injector or target
a module known to already be in the root injector (e.g. BrowserModule).
Both of these strategies are cumbersome and brittle.
Instead, this commit adds a token APP_ROOT_SCOPE which provides a
straightforward way of targeting the root injector directly, without
requiring special knowledge of modules within it.
PR Close#22185
Note, the reason this commit removes `firebase-tools` is:
1) firebase-tools has an optional dependency on
https://www.npmjs.com/package/@google-cloud/functions-emulator
2) yarn's `--ignore-optional` doesn't work for transitive deps, so
there's no way to yarn install without getting that functions-emulator
package
3) functions-emulator has a transitive dep on `grpc`
4) the version of `grpc` we get has `BUILD` files and no `WORKSPACE`
file so it always breaks `bazel build ...`
It could be solved by any of:
1) remove firebase-tools - this is what I did
2) fix yarn so you can omit optional deps of a transitive dep
3) make functions-emulator depend transitively on a more recent `grpc`
version
4) patch `grpc` after install by doing an `rm` command in our
postinstall or something
In its place we must install protobufjs. This is needed by the
ngc-wrapped test, which needs jasmine as well as bazel's worker mode
dependencies, and therefore cannot simply rely on
node_modules =
"@build_bazel_rules_typescript_tsc_wrapped_deps//:node_modules"
PR Close#22168
This saves us an executor on Travis.
Note that we still do a bazel build on travis when we run the integration tests under e2e_2.
We expect that CircleCI is the only place we'll ever consume bazel-built artifacts.
PR Close#22170
This should cause Bazel builds to be incremental, only re-building parts of Angular affected by changes since the last build.
It also fixes a potential version skew, where CI was running the Bazel linter binaries in the ngcontainer docker image, but developers built them using the versions in WORKSPACE
PR Close#21784
The AsyncPipe type signature was changed to allow
deferred creation of promises and observalbes that
is supported by the implementation by allowing
`Promise<T>|null|undefined` and by allowing
`Observable<T>|null|undefined`.
PR Close#22169
This commit bundles 3 important changes, with the goal of enabling tree-shaking
of services which are never injected. Ordinarily, this tree-shaking is prevented
by the existence of a hard dependency on the service by the module in which it
is declared.
Firstly, @Injectable() is modified to accept a 'scope' parameter, which points
to an @NgModule(). This reverses the dependency edge, permitting the module to
not depend on the service which it "provides".
Secondly, the runtime is modified to understand the new relationship created
above. When a module receives a request to inject a token, and cannot find that
token in its list of providers, it will then look at the token for a special
ngInjectableDef field which indicates which module the token is scoped to. If
that module happens to be in the injector, it will behave as if the token
itself was in the injector to begin with.
Thirdly, the compiler is modified to read the @Injectable() metadata and to
generate the special ngInjectableDef field as part of TS compilation, using the
PartialModules system.
Additionally, this commit adds several unit and integration tests of various
flavors to test this change.
PR Close#22005
All of the providers in a module get compiled into a module definition in the
factory file. Some of these providers are for the actual module types, as those
are available for injection in Angular. For tree-shakeable tokens, the runtime
needs to be able to distinguish which modules are present in an injector.
This change adds a NodeFlag which tags those module providers for later
identification.
PR Close#22005
Same fix as e70d7a2a7c
This is because the CompilerOptions needs to have directoryExists undefined in order to get the google3 behavior,
so we have to set the property outside the constructor.
Fixes#21872
PR Close#21876
Modifies validation syntax to generate back references to ensure
that identifiers are used consistently.
Introduced … to allow validating constant definition and usage.
PR Close#21877
Includes:
* display ToC for API docs
* update dgeni-packages to 0.24.1
* add floating sidebar in API docs
* add breadcrumbs and structured data for Google crawler
* improved rendering of method overloads
* properties rendered in a table
* params rendered with docs
* removal of outdated "infobox" from all API docs
PR Close#21874
Both Firefox and Safari are vulnerable to XSS if we use an inert document
created via `document.implementation.createHTMLDocument()`.
Now we check for those vulnerabilities and then use a DOMParser or XHR
strategy if needed.
Further the platform-server has its own library for parsing HTML, so we
sniff for that (by checking whether DOMParser exists) and fall back to
the standard strategy.
Thanks to @cure53 for the heads up on this issue.
PR Close#17019
We have a number of observables that have `catch` handlers to recover
from errors without causing the stream to close, and breaking the app.
We also have some `try ... catch` blocks for synchronous code for a
similar reason.
In these cases we conventionally then call `logger.error` in the catch
handler. We are interested in these errors so we are going to capture them
by reporting them to Google Analytics via the new `ReportingErrorHandler`.
PR Close#22011
This is a basic implementation of error logging using the limited
facilities provided by Google Analytics.
Errors within the Angular app itself will be handled by a new
`ReportingErrorHandler` service, which overrides and extends the
built-in `ErrorHandler`.
Further, errors outside the app, which arrive at `window.onerror`
will also be reported to Google Analytics.
Closes#21943
PR Close#22011
The `ng_module` rule now has a factories attribute that
allows explicit specification of which files are expected
to generate factories. This allows avoiding generating
empty factory files (such as `.ngfactory.js`) begin
generated which might cause down-stream tools issues if
they have a limit on the number of files that can be
processed in a single bazel action.
PR Close#22003
During the initial load of the page (probably until the icon styles are
loaded and/or applied), the `.header-link` element is wider, pushing the
heading text slightly to the right (for a brief moment).
This commit prevents this slight shift by explicitly setting the width
for the `.header-link` element.
PR Close#21695
For the initial rendering, where there is no transition from a previous
visual state to a new one, animations make little sense. The page should
load with as few reflows as possible.
Similarly, while we typically want to defer updating the SideNav state
(e.g. opened/closed) until the "leaving" document is animated out of the
page, on the initial rendering (where there is no "leaving" document)
this leads to the SideNav flashing (from closed to open).
These worked as expected before, but several parts (mostly related to
documents with a SideNav) have been accidentally broken in recent
commits (e.g. when upgraded to latest material, or enabled animations
for DocViewer transitions, etc.).
This commit restores the previous behavior by ensuring that (on the
initial rendering) the SideNav state is updated as soon as possible and
that there will be no animations when:
1. The hamburger button appears.
2. The SideNav is opened.
3. The main section's width is adjusted to make room for the SideNav.
PR Close#21695
Previously, the mocked `HttpClient` was synchronous in tests (despite
the actual `HttpClient` being asynchronous). Although we use observables
(which generally make the implementation sync/async-agnostic), the fact
that we have no control over when Angular updates/checks views and calls
lifecycle hooks resulted in different behavior (and errors) in tests
(with sync `HttpClient`) vs actual app (with async `HttpClient`).
This commit ensures that the behavior (and errors) are consistent
between the tests and the actual app by making the mocked `HttpClient`
asynchronous.
PR Close#21695
Navigating to a document while trying to expand or collapse a sub-menu
is undesirable and confusing. All sub-menu toggles should have no other
effect than expanding/collapsing the corresponding sub-menu.
PR Close#21695
Previously, the emitEvent flag was only checked when emitting on the current control.
Thus, if the control was part of a hierarchy, events were emitted on the parent and the childrens.
This fixes the issue by properly passing the emitEvent flag to both parent and childrens.
Fixes#12366
PR Close#21018
Name of selector in ForbiddenName example is not consistent with Validator class nor Html selector example. Added the selector name 'appForbiddenName' as an alias name for the input of the Validator class, and updated the view accordingly.
Fixes: #20206
PR Close#20464
This is a customization of the rollup_bundle rule from rules_nodejs
which adds the build-optimizer as a plugin.
Add a functional test with fast round-trip that asserts the minified app
still works.
Publish the min.js artifact on circleCI so we can track its size.
PR Close#22004
- Fix the case when first dynamic values are NO_CHANGE
- Do not store the static texts (even indexes) as bindings,
- Do not diff static texts (they do not change),
- Do not stringify static texts,
- Remove superfluous values walking.
PR Close#21881
Previously searching for `compose` did not include `Validators`
in the search results because we were not including all the
`static` members of API docs in the index.
PR Close#21988
These tags are removed when the doc is ready and valid, but this will
allow us to block indexing in the case that the Angular app fails to
bootstrap or load the document for some non-404 reason.
This should get around the problem with hardcoded tags. See
c3fb820473Closes#21941
PR Close#21992
This will prevent the confusing errors for first time users who
try to generate the docs with `yarn docs` and are told there are
dangling links.
Closes#21944
PR Close#21970
By adding attributes on the <ng-content> element template authors
can decide how content should be re-projected (or, in other words:
which selectors should match re-projected content).
PR Close#21935
This has two benefits:
* it prepares the way for the API docs update, which need parameter docs
* it doesn't incorrectly report dangling links for non-latin anchors
Closes#21306
PR Close#21802
Service Workers can be tricky to work with in production, and often
it becomes necessary to deactivate an existing SW. This is trickier
than one might imagine - as long as clients on the old SW may exist
it is important to serve some script at the old SW URL. This commit
adds safety-worker.js to the published NPM package, which is useful
for that purpose. On install the SW unregisters itself which safely
and gradually allows older clients to update.
PR Close#21863
Previously, an interceptor attempting to inject HttpClient directly
would receive a circular dependency error, as HttpClient was
constructed via a factory which injected the interceptor instances.
Users want to inject HttpClient into interceptors to make supporting
requests (ex: to retrieve an authentication token). Currently this is
only possible by injecting the Injector and using it to resolve
HttpClient at request time.
Either HttpClient or the user has to deal specially with the circular
dependency. This change moves that responsibility into HttpClient
itself. By utilizing a new class HttpInterceptingHandler which lazily
loads the set of interceptors at request time, it's possible to inject
HttpClient directly into interceptors as construction of HttpClient no
longer requires the interceptor chain to be constructed.
Fixes#18224.
PR Close#19809
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
Running `yarn start` (which watches the `src/` directory) and
`yarn docs-watch` (which cleans up files in `src/generated/api/`) often
results in `ENOTEMPTY` errors.
This commit solves it by ensuring that `yarn docs` has been completed
before running `yarn start`.
PR Close#21806
The 2.6 version of TypeScript's `resolveModuleName` started to
require paths passed to be separated by '/' instead of being
able to handle '\'.
`ngc` and `ng` already do this transformation.
Fixes: #21811
PR Close#21812
This is a more defensive approach to ensure that references to
ParamInheritanceType from the published declarations do not cause
compilation errors when compiling Angular from the published packages.
Fixes#21456
PR Close#21773
Currently, NavigationStart there is no way to know if an navigation was triggered imperatively or via the location change. These two use cases should be handled differently for a variety of use cases (e.g., scroll position restoration). This PR adds a navigation source field and restored navigation id (passed to navigations triggered by a URL change).
PR Close#21728
Since we specify `bottom: 0`, specifying the height is unnecessary and
leads to wrong height (unless updated) on narrow screens where the
topbar height is decreased.
Partly addresses #21520.
PR Close#21538
The CLI app is now checked in, rather than generated dynamically with
`ng new`. This loses some assertion power, but gains hermeticity.
It also checks in lock files for all integration tests, avoiding
floating version numbers.
We'll need another place to integration test between changes in
the various repositories - but the angular/angular PR-blocking status
is not the right place to do this.
PR Close#21555
Currently, `shimCssText` only keep `/*# sourceMappingUrl ... */` comments and strip `/*# sourceURL ... */` comments. So, Chrome can't find the source maps for component style(that's created in new `style` tags)
PR Close#16088
Also, remove `plnkr.json` for `service-worker-getting-started` guide,
since it is not used and ServiceWorker cannot work correctly in
plnkr/stackblitz anyway (e.g. no build step to re-compute hashes).
A zipper might be useful and can be added in a subsequent PR, but it is
currently broken (e.g. no dependency on `@angular/service-worker`).
PR Close#20165
- Update tooling to support revised testing guide (PR #20697).
- Require jasmine upgrade for examples that use marble testing.
- Copy `cli/package.json` to `testing/` and add `jasmine-marbles`.
- Resolve merge conflicts created by `NgModules` guides.
PR Close#20165
Folding errors passed calls prevented the static reflector from
begin able to ignore errors in annotations it doesn't know as
the call to the unknown annotation was elided from the metadata.
Fixes: #21273
PR Close#21708
Implement NgOnChangesFeature, ViewContainerRef, TemplateRef,
and the renderEmbeddedTemplate instruction, and wire together the
pieces required for the ngForOf directive to work.
PR Close#21430
To prepare for pending ngForOf work, the dep from instructions -> query
should be broken. This will enable a dep from di -> instructions while
avoiding a di -> instructions -> query -> di cycle.
Analyzing this cycle also uncovered another problem: the implementation
of query() breaks tree-shaking through a hard dependency on DI concepts
of TemplateRef, ElementRef, ViewContainerRef. This is fundamentally due
to how query() can query for those values without any configuration.
Instead, this fix introduces the concept by employing the strategy
pattern, and redefining QueryReadType to pass a function which will
return one of the above values. This strategy is then used for 'read'
instead of an enum in cases where special values should be read from
the DI system.
PR Close#21430
assertLessThan() actually does the opposite of what it advertises.
It's only through luck that existing asserts have not failed
before. This changes assertLessThan to actually assert that the
value is less than something.
PR Close#21430
The `<meta name="robots" content="noindex">` tag is used
to indicate to search engine crawlers that they should not index
the current page. This is set dynamically by the the document
viewer component to ensure that 404 and other erroring pages
are not added to the search index.
This relies upon the idea that the crawling bot will run the JS
and wait to see if this meta tag has been added or not.
Since we believe that the `googebot` will do this, we also
pre-emptively add a hard-coded noindex tag specifically for
this bot, so that if anything else fails in bootstrapping the app,
the failed page will not be added to the index.
Closes#21317
PR Close#21665
The "enableIvy" compiler option is the initial implementation
of the Render3 (or Ivy) code generation. This commit enables
generation generating "Hello, World" (example in the test)
but not much else. It is currenly only useful for internal Ivy
testing as Ivy is in development.
PR Close#21427
Adding the binding name to the error message recieved by the user gives
extra context on what exactly changed. The tests are also updated to
reflect the new error message.
PR Close#20352
- Improve `WrappedValue` by adding `unwrap` symetrical to `wrap`.
- remove dead code - `ValueUnwrapper`
The property `wrapped` is an implementation details and should never be accessed
directly - use `unwrap(wrappedValue)`. Will change to protected in Angular 7.
PR Close#20997
Previously the generated files were cleaned out before
doc-gen began (via a yarn pre-script). This can cause a
race condition in the CLI server, which prevents the new
generated files from being picked up.
Now we delay the cleaning until the last minute to ensure
that they ar still picked up by the webpack server.
PR Close#21540
This commit fixes a bug whereby the caches are not cleared when the
program changes. This subsequently produces the incorrect error of
'Component ... is not included in a module ...'.
PR Close#19405
PR Close#21337
This change makes the code cleaner for the user. It does mean
a little bit more work for us since we have to patch the `type` back
into the `DirectiveDef`. However since the patching happens only once
on startup it should not be significant.
PR Close#21374
This separation is no longer needed since directives are now passed into the `container` as an array rather than as child functions of the `containerStart`
PR Close#21374
This change creates a spec file which contains canonical examples
of how the template compiler will translate templates into expected
output.
PR Close#21374
We used to have a separate `directive` instruction for instantiating
directives. However, such an instruction requires that directives
are created in the correct order, which would require that template
compiler would have knowledge of all dependent directives. This
would break template compilation locality principle.
This change only changes the APIs to expected form but does
not change the semantics. The semantics will need to be corrected
in subsequent commits. The semantic change needed is to
resolve the directive instantiation error at runtime based on
injection dependencies.
PR Close#21374
-rw-r--r-- 1 iminar eng 72498 Jan 9 22:20 dist/0.0d2802b63e9f4f4615cd.chunk.js
-rw-r--r-- 1 iminar eng 14872 Jan 9 22:20 dist/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1558 Jan 9 22:20 dist/inline.cb4b7a639193fc489d3b.bundle.js
-rw-r--r-- 1 iminar eng 454654 Jan 9 22:20 dist/main.b65f32ffc92e075e64e0.bundle.js
-rw-r--r-- 1 iminar eng 40264 Jan 9 22:20 dist/polyfills.87edf5d695f14a29bf91.bundle.js
-rw-r--r-- 1 iminar eng 54001 Jan 9 22:20 dist/worker-basic.min.js
PR Close#21351
Cache reference resolution for external references as finding
the declaration of a symbol is expensive and does not change
for a program once created.
This resolves a signficant performance regression in the langauge
service.
PR Close#21359
This helps ensure we use the same tsconfig.json file for all compilations.
Next steps are to make it the same tsconfig.json file used by the editor
PR Close#20964
This should fix the size regression spotted via the previous commit.
-rw-r--r-- 1 iminar eng 72498 Jan 8 00:03 dist/0.86a7a08f7866e6cdc36f.chunk.js
-rw-r--r-- 1 iminar eng 14872 Jan 8 00:03 dist/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1558 Jan 8 00:03 dist/inline.7722895d8c844f710bcd.bundle.js
-rw-r--r-- 1 iminar eng 453905 Jan 8 00:03 dist/main.faff0e2da95443f759f5.bundle.js
-rw-r--r-- 1 iminar eng 40264 Jan 8 00:03 dist/polyfills.87edf5d695f14a29bf91.bundle.js
-rw-r--r-- 1 iminar eng 54001 Jan 8 00:03 dist/worker-basic.min.js
PR Close#21350
This change introduces a size regression of 9kb for main.js :-(
I filed an issue for this: https://github.com/angular/angular-cli/issues/9108
-rw-r--r-- 1 iminar eng 72546 Jan 5 19:27 dist.cli-1.6.3/0.86a7a08f7866e6cdc36f.chunk.js
-rw-r--r-- 1 iminar eng 14893 Jan 5 19:27 dist.cli-1.6.3/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1558 Jan 5 19:27 dist.cli-1.6.3/inline.7722895d8c844f710bcd.bundle.js
-rw-r--r-- 1 iminar eng 466484 Jan 5 19:27 dist.cli-1.6.3/main.faff0e2da95443f759f5.bundle.js
-rw-r--r-- 1 iminar eng 40363 Jan 5 19:27 dist.cli-1.6.3/polyfills.87edf5d695f14a29bf91.bundle.js
-rw-r--r-- 1 iminar eng 54001 Jan 5 19:27 dist.cli-1.6.3/worker-basic.min.js
PR Close#21350
When the SW fetches URLs listed in a manifest with hashes, it checks
the content hash against the manifest to make sure it has the correct
version of the URL. In the event of a mismatch, the SW is supposed to
consider the manifest invalid, and avoid using it. There are 3 cases
to consider by which this can happen.
Case 1: during the initial SW installation, a manifest is activated
without waiting for every URL to be fully loaded. In the background,
every prefetch URL listed by the manifest is requested and cached.
One such prefetch request could fail the hash test, and cause the
manifest to be treated as invalid. In such a case, the SW should
enter a state of EXISTING_CLIENTS_ONLY, as the latest manifest is
invalid.
This case works today.
Case 2: during the initial SW installation, as in Case 1, a manifest
is activated without waiting for each URL to fully load. However,
it's possible that the application could request a URL with a bad
hash before background initialization tries to load that URL. This
happens if, for example, the application has a broken index.html.
In this case, the SW should enter a state of EXISTING_CLIENTS_ONLY,
and serve the request from the network instead.
What happens today is that the internal error escapes the SW and
is returned as a rejected Promise to respondWith(), causing a
browser-level error that the site cannot be loaded, breaking the
site.
This change allows the SW to detect the error and enter the correct
state, falling back on the network if needed.
Case 3: during checkForUpdate(), the SW will try to fully cache the
new update before making it the latest version. Failure here is
complicated - if the page fails to load due to transient network
conditions (timeouts, 500s, etc), then it makes sense to continue
serving the existing cached version, and attempt to activate the
update on the next cycle.
If the page fails due to non-transient conditions though (400 error,
hash mismatch, etc), then the SW should consider the updated
manifest invalid, and enter a state of EXISTING_CLIENTS_ONLY.
Currently, all errors are treated as transient.
This change causes the SW to treat all errors during updates as
non-transient, which can cause the SW to unnecessarily enter a
safe mode. A future change can allow the SW to remain in normal mode
if the error is provably transient.
PR Close#21288
This causes a 3.4kb size regressions for polyfills.js. :-(
I filed an issue for this: https://github.com/angular/zone.js/issues/989
-rw-r--r-- 1 iminar eng 73998 Jan 5 17:51 dist/0.5fb611ef423970fd3ba1.chunk.js
-rw-r--r-- 1 iminar eng 14880 Jan 5 17:51 dist/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1558 Jan 5 17:51 dist/inline.797233300016416206fc.bundle.js
-rw-r--r-- 1 iminar eng 457592 Jan 5 17:51 dist/main.5870135237d5187f1ab6.bundle.js
-rw-r--r-- 1 iminar eng 40684 Jan 5 17:51 dist/polyfills.88f0257676f76560da16.bundle.js
-rw-r--r-- 1 iminar eng 54001 Jan 5 17:51 dist/worker-basic.min.js
PR Close#21349
Chrome 63 can cause the navigationStart event for the first
run to arrive with a different pid than the start of the
benchpress run. This makes the first collected result invalid.
This workaround causes the sampler to ignore runs that have this
condition.
PR Close#21396
Use `-f` when doing `git fetch` for the PR. Without
it the `git fetch` will not overwrite what is currently
fetched locally, in essence doing fast-forward only.
PR Close#21295
The `@internal` tag prevents code items from appearing in the docs and the
typings files. You can now use `@nodoc` if you only want it to be excluded
from the docs and not the typings files.
Closes#20990
PR Close#21024
We redirect non-docs pages in the "archive" deployment back to the stable
deployment. We should not redirect pages in the "next" deployment.
Closes#19505
PR Close#21027
Apparently Object.keys on NamedNodeMap work differently with googlebot :-(
There are not tests since we don't have a way to write tests for googlebot,
but I did manually verify that after this fix googlebot correctly renders
several of the previously broken pages.
Fixes#21272
PR Close#21305
Pass one argument to `logger.error()` to improve error reporting in
environments that do not handle more than one arguments well (e.g.
Googlebot's web rendering service).
Related to #21272.
PR Close#21293
Bazel runs on newer version of RxJs than is installed in Yarn. The never version subclasses `EmptyError` in a different way which fails the `instanceof` check. This change makes the `instanceof` check more robust with respect to `EmptyError`.
PR Close#21053
- Add tests target for `test`, `test_node_only` and `test_web` in `core` package.
- Created a `_testing_init` pseudo package where bootstrap code for tests is kept.
- Moved `source_map_util` from `test` to `testing` so to prevent circular dependency.
- Removed `visibility:public` for testing `BUILD` packages.
PR Close#21053
`main()` function used to be needed to support dart, since dart
Does not allow top level statements. Since we no longer use dart
The need for `main()` has been removed.
In preparation for `Basel` and standardized way of running tests
we are removing `main()`
PR Close#21053
This patch fixes animations so that if multiple sub @triggers are used
and are blocked by a parent animation then the engine will not lead
itself into an infinite loop.
PR Close#21119
This PR fixes a circular dependency among those files in Renderer3:
`query` -> `di` -> `instructions` -> `query` -> ...
Looking at the above dependencies the `di` -> `instructions` import is
a problematic one. Previously `di` had an import from `instructions`
since we can known about "current node" only in `instructions`
(and we need "current node" to create node injector instances).
This commit refactors the code in the way that functions in the
`di` file don't depend on any info stored module-global variables
in `instructions`.
PR Close#20855
I'm not quite sure how to test this since we don't have any infrastructure for these kinds of tests.
I did verify the fix manually though.
Fixes#15740
PR Close#21147
Closure Compiler renames all properties that are "internal" to the
program. `DOMAnimation` however is external, it is a browser API, so its
fields must not be renamed.
This change marks `DOMAnimation` as external using `declare interface`,
which will cause Closure Compiler to back off and prevent renaming of
any of its fields.
PR Close#21125
Previously, the router would merge path and matrix params, as well as
data/resolve, with special rules (only merging down when the route has
an empty path, or is component-less). This change adds an extra option
"paramsInheritanceStrategy" which, when set to 'always', makes child
routes unconditionally inherit params from parent routes.
Closes#20572.
The compiler host would force any file that is in node_modules
into the list of files that needed to be type checked which
captures .js files if `allowJs` is set to `true`. This should
have only forced .d.ts files into the project to enable
generation of factories.
Fixes: #19757
- Avoid unnecessary animations, style transitions, repositioning on
initial rendering.
- Better handle transitioning from/to Home page (which is the only page
with transparent top-menu).
- Better coordinate sidenav and hamburger animations with page
transitions.
- Improve fade-in/out animations.
Fixes#20996
This allows examples to be found during aio's `yarn serve-and-sync`, which only
looks for examples in `packages/examples/<packageName>/**/*`, where
`packageName` is the name of the package that the modified file belonged to;
e.g. `core`, `common`, etc.).
Allows a directive to use the expression passed directly to a property
as a guard instead of filtering the type through a type expression.
This more accurately matches the intent of the ngIf usage of its template
enabling better type inference.
Moved NgIf to using this type of guard instead of a function guard.
Closes: #20967
Currently the Service Worker checks for updates only on SW startup,
an event which happens frequently but also nondeterministically. This
makes it hard for developers to observe the update process or reason
about how updates will be delivered to users. This problem is
exacerbated by the DevTools behavior of keeping the SW alive
indefinitely while opened, effectively preventing the page from
updating at all.
This change causes the SW to additionally check for updates on
navigation requests (app page reloads). This creates deterministic
update behavior, and is much easier for developers to reason about.
It does leave the old update-on-SW-startup behavior in place, as
removing that would be a breaking change.
Fixes#20877
Closure Compiler cannot infer that the swtich statement is exhaustive,
which causes it to complain that the method does not always return a
value.
Work around the problem by throwing an exception in the default case,
and using the `: never` type to ensure the code is unreachable.
There seems to be some issue that causes Chrome/ChromeDriver to
unexpectedly reload during the aio e2e tests, causing flakes. It is not
clear what exactly is causing the reloading, but to the best of my
knowledge it is something inside Chrome or ChromeDriver.
Pinning Chrome to r494239 (between 62.0.3185.0 and 62.0.3186.0) fixes
the flakes.
Fixes#20159
Due to an overly agressive assert the compiler would generate
an internal error when referencing an enum declared in
namspace.
Fixes#18170
PR Close#20947
Previously, this code would unconditionally add a @fileoverview
comment to generated files, and only if the contained any code at all.
However often existing fileoverview comments should be copied from the
file the generated file was originally based off of. This allows users
to e.g. include Closure Compiler directives in their original
`component.ts` file, which will then automaticallly also apply to code
generated from it.
This special cases `@license` comments, as Closure disregards directives
in comments containing `@license`.
PR Close#20870
Since our version of Chromium is also pinned, a new ChromeDriver (that
drops support for our Chromium version) can cause random (and unrelated
to the corresponding changes) errors on CI.
This commit pins the version of ChromeDriver and it should now be
manually upgraded to a vrsion that is compatible with th currently used
Chromium version.
PR Close#20940
`$any()` can now be used in a binding expression to disable type
checking for the rest of the expression. This similar to `as any` in
TypeScript and allows expression that work at runtime but do not
type-check.
PR Close#20876
I originally added this when I was trying to build `//packages/core`, which is not what users will do often.
This makes it harder for team members to understand what Bazel is doing. I find myself suggesting to turn it off, so it's better to just remove it.
PR Close#20943
Structural directives can now specify a type guard that describes
what types can be inferred for an input expression inside the
directive's template.
NgIf was modified to declare an input guard on ngIf.
After this change, `fullTemplateTypeCheck` will infer that
usage of `ngIf` expression inside it's template is truthy.
For example, if a component has a property `person?: Person`
and a template of `<div *ngIf="person"> {{person.name}} </div>`
the compiler will no longer report that `person` might be null or
undefined.
The template compiler will generate code similar to,
```
if (NgIf.ngIfTypeGuard(instance.person)) {
instance.person.name
}
```
to validate the template's use of the interpolation expression.
Calling the type guard in this fashion allows TypeScript to infer
that `person` is non-null.
Fixes: #19756?
PR Close#20702
- Fix embedded ToC:
Previously, the element was added too late and was never instantiated.
- Improve ToC update timing:
Previously, the ToC was updated after the entering animation was over, which
resulted in the ToC being outdated for the duration of the animation.
- Improve destroying components timing:
Previously, the old embedded components were destroyed as soon as a
new document was requested. Even if the transition ended up never
happening (e.g. due to error while preparing the new document), the
embedded components would have been destroyed and the displayed
document would not work as expected.
Now the old embedded components are destroyed only after the new
document has been fully prepared.
- Improve scroll-to-top timing:
Previously, the page was scrolled to top after the entering animation was
over, which resulted in "jumpi-ness". Now the scrolling happens after the
leaving document has been removed and before the entering document has been
inserted.
PR Close#18428
Previously, the document was shown as soon as the HTML was received, but before
the embedded components were ready (e.g. downloaded and instantiated). This
caused FOUC (Flash Of Uninstantiated Components).
This commit fixes it by preparing the new document in an off-DOM node and
swapping the nodes when the embedded components are ready.
PR Close#18428
Fixes app build error in testing guide which has testing folder at multiple levels,
with files in them referring to files in the root `testing` folder.
Also removed the exclusion of files with `.1` in the name because
all app `.ts` files must be buildable per aio policy.
must build
PR Close#20779
For some reason, prior to this fix, the boolean set matching
code (within `animation_transition_expr.ts`) failed to remain
the same when compiled with closure. This refactor makes sure
that the code stays in tact.
Reproduction Details:
Passes without `ng build --prod`: https://burger.stackblitz.io/
Fails with `ng build --prod`: http://burger.fxck.cz/Closes#20374
PR Close#20725
Closure Compiler by default will report diagnostics from type checks in
any JavaScript code, including code emitted by the Angular compiler.
Disabling `checkTypes` substantially reduces warning spam for users, and
allows them to run with stricter compiler flags (e.g. treating actual
diagnostics from user code as errors).
Closure Compiler will still type check the code and use types (where
found and correct) for optimizations.
PR Close#20828
Add enough BUILD files to make it possible to
`bazel build packages/core/test`
Also re-format BUILD.bazel files with Buildifier.
Add a CI lint check that they stay formatted.
PR Close#20768
The package.json esm2015 points to the wrong path.
"esm15" should be "esm2015"
Service Worker can't be compiled with use of Closure Compiler
PR Close#20800
The scripts were accidentally broken in #20524. More specifically, when a limit
was exceeded the script would break while trying to log an error message due to
a missing `commit` variable.
This commit fixes it and also does some minor clean-up (improve docs, use more
descriptive variable names, remove dead code, etc).
PR Close#20683
Not every application is served from the domain root. The Service
Worker made a bad assumption that it would be, and so requested
/ngsw.json from the domain root.
This change corrects this assumption, and requests ngsw.json without
the leading slash. This causes the request to be interpreted
relative to the SW origin, which will be the application root.
The Service Worker contains a mechanism by which it will postMessage
itself a signal to initialize its caches. Through this mechanism,
initialization happens asynchronously while keeping the SW process
alive.
Unfortunately in Firefox, the SW does not have the ability to
postMessage itself during the activation event. This prevents the
above mechanism from working, and the SW initializes on the next
fetch event, which is often too late.
Therefore, this change has the application wait for SW changes and
tells each new SW to initialize itself. This happens in addition to
the self-signal that the SW attempts to send (as self-signaling is
more reliable). That way even on browsers such as Firefox,
initialization happens eagerly.
Currently a bug exists where attempting to inject SwPush crashes the
application if Service Workers are unsupported. This happens because
SwPush doesn't properly detect that navigator.serviceWorker isn't
set.
This change ensures that all passive observation of SwPush and
SwUpdate doesn't cause crashes, and that calling methods to perform
actions on them results in rejected Promises. It's up to applications
to detect when those services are not available, and refrain from
attempting to use them.
To that end, this change also adds an `isSupported` getter to both
services, so users don't have to rely on feature detection directly
with browser APIs. Currently this simply detects whether the SW API
is present, but in the future it will be expanded to detect whether
a particular browser supports specific APIs (such as push
notifications, for example).
Currently, the way to not use the SW is to not install its module.
However, this means that you can't inject any of its services.
This change adds a ServiceWorkerModule.disabled() MWP, that still
registers all of the right providers but acts as if the browser does
not support Service Workers.
* revert: style: broken build due to missing new lines
This reverts commit ba6af2a6dd.
The commit that introduced these files (48300067f) will also get
reverted.
* revert: docs(aio): add service worker guide content and update nav (#20021)
This reverts commit 48300067fb.
This commit has some issues (e.g. breaks some e2e tests, adds images
to the wrong directories, breaks linting, etc).
Reverting in order to investigate and fix.
Saving `oldProgram` in `AngularCompilerProgram` instances is causing a memory leak for unemitted programs.
It's not actually used so simply not saving it fixes the memory leak.
Fix#20691
PR Close#20692
This changes XhrBackend to not strip the XSSI prefix from error text
if such a prefix is present but the remaining body does not parse as
JSON.
PR Close#19958
Previously, XhrBackend would call JSON.parse('') if the response body was
empty (a 200 status code with content-length 0). This changes the XhrBackend
to attempt the JSON parse only if the response body is non-empty. Otherwise,
the body is left as null.
Fixes#18680.
Fixes#19413.
Fixes#19502.
Fixes#19555.
PR Close#19958
Previously, HttpClient used the overly clever test "body || null"
to determine when a body parameter was provided. This breaks when
the valid bodies '0' or 'false' are provided.
This change tests directly against 'undefined' to detect the presence
of the body parameter, and thus correctly allows falsy values through.
Fixes#19825.
Fixes#19195.
PR Close#19958
The errors produced when error were encountered while interpreting the
content of a directive was often incomprehencible. With this change
these kind of error messages should be easier to understand and diagnose.
PR Close#20459
Also replaces “Angular Module” with “NgModule” wherever that is clarifying.
Continue using “module” when qualified as in “feature module”, “root module”, “routing module”, etc.
PR Close#19776
Do not match code "words" that are part of a hyphenated
string of characters: e.g. `platform-browser-dynamic` should
not auto-link `browser`.
Do not match code "words" that correspond to pipe names
but are not preceded by a pipe `|` character. E.g. `package.json` should
not auto link `json` to the `JsonPipe`.
Closes#20187
PR Close#20468
The type-check block generated with `"fullTemplateTypeCheck"` was
invalid if the it contained a template ref as would be generated
using the `else` micro-syntax of `NgIf`.
Fixes: #19485
PR Close#20463
Clearing array with setting length to 0 replaced with [] for being short
and marginally efficient. For reference: [] is turned into a sequence of
around 15 machine instructions on x64 (if bump pointer allocation succeeds),
whereas a.length=0 is a C++ runtime function call, which requires 10-100x as
many instructions.
Benedikt Meurer
PR Close#20395
Using `display: none` on the `<h1>` causes `innerText` to not work as expected
and include the icon ligature (`link`) in the title. This caused the window
title on the angular.io Home page to appear as "Angular - link".
This commit fixes it by not generating anchors at all for headings with the
`no-anchor` class.
Fixes#20427
PR Close#20440
- update to TypeScript 2.5
- point the 2.4 typings test at the previous typescript version, so we
don't break it accidentally
- widen the peerDeps from Angular packages that depend on TypeScript
- update to latest TypeScript 2.5 compatible Bazel rules
- move .bazelrc to tools/bazel.rc per https://docs.bazel.build/versions/master/best-practices.html#bazelrc
PR Close#20175
Throwing an exception in a lifecycle event will delay but not
prevent an Init method, such as `ngOnInit`, `ngAfterContentInit`,
or `ngAfterViewInit`, from being called. Also, calling `detectChanges()`
in a way that causes duplicate change detection (such as a
child component causing a parent to call `detectChanges()` on its
own `ChangeDetectorRef`, will no longer prevent change `ngOnInit`,
`ngAfterContentInit` and `ngAfterViewInit` from being called.
With this change lifecycle methods are still not guarenteed to be
called but the Init methods will be called if at least one change
detection pass on its view is completed.
Fixes: #17035
PR Close#20258
This commit fixes the options passed to ReflectorHost to include 'paths'
if it's specified in compiler options, so that dependency modules can
be loaded.
PR Close#20222
`cmp:host {}` and `cmp:host some-other-selector {}` were not handled
consistently.
Note those should not match anything but are made equivalent to respectively
`:host(cmp)` and `:host(cmp) some-other-selector` to avoid breaking legacy apps.
This allows to overwrite templates for JIT and AOT components alike.
In contrast to `TestBed.overrideTemplate`, the template is compiled
in the context of the testing module, allowing to use other testing
directives.
Closes#19815
-rw-r--r-- 1 iminar eng 14880 Nov 4 11:54
dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1533 Nov 4 11:54
dist/inline.9183bfe0d60f43b6a772.bundle.js
-rw-r--r-- 1 iminar eng 486476 Nov 4 11:54
dist/main.f5445f99490330207c9c.bundle.js
-rw-r--r-- 1 iminar eng 37070 Nov 4 11:54
dist/polyfills.0dfca732c5a075c110d0.bundle.js
Closes#20184
This PR was merged without API docs and general rollout plan.
We can't release this as is in 5.1 without a plan for documentation, cli integration, etc.
It's illegal to coerce a Symbol to a string, and results in a TypeError:
TypeError: Cannot convert a Symbol value to a string
Previously, the custom jasmineToString() method monkey-patched onto Maps
in platform-browser/testing/src/matchers.ts would coerce keys and values
to strings. A change in a newer version of Jasmine calls this method more
often, resulting in calls against Maps which contain Symbols in some
applications, which causes crashes.
The fix is to explicitly convert keys and values to strings, which does
work on Symbols.
When this command is run on CI, `yarn build` has already been run, so
this was unnecessarily building angular.io again (adding ~4mins to the
`aio` job).
When this command is run locally, it is most often about testing a new
`lighthouse` version/config, so you don't need to build angular.io over
and over (and if necessary, one can always run `yarn build` manually).
Closes#19633
We use the globally installed yarn now. The local yarn was used in
`check-environment.js` only, which results in the `--integrity` check
always failing (if dependencies were installed with the global yarn).
Checks that cause the doc-gen to fail were already disabled in `docs-watch`
for the doc-gen that runs when a file is changed.
Now these checks are also disabled for the initial doc-gen run.
closes#20038
By setting `renderExamples.ignoreBrokenExamples = true` the doc-gen will
not fail if there is something wrong with an example. Instead it will
just log a warning.
Installing dependencies for the docs examples fails, because the
lockfile is out-of-sync with the corresponding `package.json`.
This commit brings the lockfile in sync with `package.json`.
(For reference, this was accidentally broken in #20039.)
-rw-r--r-- 1 iminar eng 14880 Nov 1 12:25 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1533 Nov 1 12:25 dist/inline.2826385ad3e299c6d1c1.bundle.js
-rw-r--r-- 1 iminar eng 486476 Nov 1 12:25 dist/main.f0610805f4aad19da4be.bundle.js
-rw-r--r-- 1 iminar eng 37070 Nov 1 12:25 dist/polyfills.0dfca732c5a075c110d0.bundle.js
PR Close#19702
This reverts commit f0d530b4de38f71c759e42afc8f3d7531eb1b1fb.
cli rc.8 reintroduces the node polyfill which causes size regression,
so I'm putting the patch back in.
-rw-r--r-- 1 iminar eng 14880 Nov 1 12:11 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1533 Nov 1 12:11 dist/inline.25600c3b48de18b97581.bundle.js
-rw-r--r-- 1 iminar eng 486476 Nov 1 12:11 dist/main.d1292a34401056535884.bundle.js
-rw-r--r-- 1 iminar eng 37070 Nov 1 12:11 dist/polyfills.0dfca732c5a075c110d0.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 14880 Nov 1 11:57 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1533 Nov 1 11:57 dist/inline.3574d1d784c09c507dbd.bundle.js
-rw-r--r-- 1 iminar eng 497812 Nov 1 11:57 dist/main.76bbb69df79eaefef54c.bundle.js
-rw-r--r-- 1 iminar eng 37259 Nov 1 11:57 dist/polyfills.fdb71956ccd13330fb47.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 14880 Oct 30 11:29 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1533 Oct 30 11:29 dist/inline.25600c3b48de18b97581.bundle.js
-rw-r--r-- 1 iminar eng 486476 Oct 30 11:29 dist/main.d1292a34401056535884.bundle.js
-rw-r--r-- 1 iminar eng 37070 Oct 30 11:29 dist/polyfills.0dfca732c5a075c110d0.bundle.js
PR Close#19702
The use of `System.import()` in test.ts was causing the webpack build to fail
with a mysterious "Module build failed: Error: TypeScript compilation failed" error,
when running `yarn test`.
PR Close#19702
This will be fixed in CLI once https://github.com/angular/angular-cli/pull/8130 lands.
-rw-r--r-- 1 iminar eng 14942 Oct 20 22:23 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 20 22:23 dist/inline.5d66b81ec9e01af9d28d.bundle.js
-rw-r--r-- 1 iminar eng 528395 Oct 20 22:23 dist/main.e36bb99245ca52ae546f.bundle.js
-rw-r--r-- 1 iminar eng 37205 Oct 20 22:23 dist/polyfills.0dfca732c5a075c110d0.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 14942 Oct 20 22:16 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 20 22:16 dist/inline.68ebcf831dc9c905804f.bundle.js
-rw-r--r-- 1 iminar eng 541291 Oct 20 22:16 dist/main.5ec6fb5f95fc0433d822.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 20 22:16 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 84219 Oct 19 21:37 dist/0.0f327734d18211139822.chunk.js
-rw-r--r-- 1 iminar eng 14942 Oct 19 21:37 dist/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1560 Oct 19 21:37 dist/inline.887757679ff553e20b54.bundle.js
-rw-r--r-- 1 iminar eng 492354 Oct 19 21:37 dist/main.5e5dc9ed980c9f5dc2bd.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 19 21:37 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 84219 Oct 18 21:05 dist/0.0f327734d18211139822.chunk.js
-rw-r--r-- 1 iminar eng 14942 Oct 18 21:05 dist/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1560 Oct 18 21:05 dist/inline.887757679ff553e20b54.bundle.js
-rw-r--r-- 1 iminar eng 492354 Oct 18 21:05 dist/main.5e5dc9ed980c9f5dc2bd.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 18 21:05 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 84219 Oct 18 09:13 dist/0.8ef208c27531d5c6af63.chunk.js
-rw-r--r-- 1 iminar eng 14942 Oct 18 09:13 dist/4.c719ac5645940382cdce.chunk.js
-rw-r--r-- 1 iminar eng 1560 Oct 18 09:13 dist/inline.adc367eb50c706f3fd04.bundle.js
-rw-r--r-- 1 iminar eng 492354 Oct 18 09:13 dist/main.b9d9549455c74aff1480.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 18 09:13 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 14942 Oct 13 16:12 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 13 16:12 dist/inline.eede8140efeab4c45b22.bundle.js
-rw-r--r-- 1 iminar eng 559389 Oct 13 16:12 dist/main.20858f9aa7cf8741b6aa.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 13 16:12 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 14942 Oct 13 14:52 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 13 14:52 dist/inline.6ca24f1c3b848103b041.bundle.js
-rw-r--r-- 1 iminar eng 567802 Oct 13 14:52 dist/main.c8183a2c0116782ca366.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 13 14:52 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 14942 Oct 13 14:30 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 13 14:30 dist/inline.702d6ff5146ddc373f05.bundle.js
-rw-r--r-- 1 iminar eng 588943 Oct 13 14:30 dist/main.64c96d55a10c56cfd6cd.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 13 14:30 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
-rw-r--r-- 1 iminar eng 14942 Oct 13 13:35 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 13 13:35 dist/inline.f005f1bd6803b72f5961.bundle.js
-rw-r--r-- 1 iminar eng 582527 Oct 13 13:35 dist/main.b9ef1abb785be8de15b8.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 13 13:35 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
all the non-npm changes were made by the angular-material-prefix-updater tool.
the tool missed a few things, which I'll fix in a separate commit to preserve the diff.
-rw-r--r-- 1 iminar eng 14942 Oct 13 13:09 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 13 13:09 dist/inline.0592c25ceb544d6aca3d.bundle.js
-rw-r--r-- 1 iminar eng 578250 Oct 13 13:09 dist/main.45d4edca3facc6d621e7.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 13 13:09 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
the size regression has gotten worse:
-rw-r--r-- 1 iminar eng 14942 Oct 13 12:24 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 13 12:24 dist/inline.41e701c562960ede8ef5.bundle.js
-rw-r--r-- 1 iminar eng 865780 Oct 13 12:24 dist/main.6c4c605d461870b9c2d7.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 13 12:24 dist/polyfills.f8409a9eb69060ac1aa6.bundle.js
PR Close#19702
this causes the size regression to get only worse:
-rw-r--r-- 1 iminar eng 14942 Oct 13 10:37 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 13 10:37 dist/inline.3cc964095cb25e329dc0.bundle.js
-rw-r--r-- 1 iminar eng 846141 Oct 13 10:37 dist/main.5eb64df77b2877327a16.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 13 10:37 dist/polyfills.965a9a5ad3e11b17f85e.bundle.js
PR Close#19702
there is a size regression right now because the CLI is out of date:
-rw-r--r-- 1 iminar eng 14942 Oct 13 10:23 dist/0.b19e913fbdd6507d346b.chunk.js
-rw-r--r-- 1 iminar eng 1535 Oct 13 10:23 dist/inline.812a4af83ecce165c71c.bundle.js
-rw-r--r-- 1 iminar eng 643481 Oct 13 10:23 dist/main.74550bb35f9f5a57e78a.bundle.js
-rw-r--r-- 1 iminar eng 37402 Oct 13 10:23 dist/polyfills.965a9a5ad3e11b17f85e.bundle.js
PR Close#19702
Condition: static analysis error, given:
- noResolve:true
- generateCodeForLibraries: false
- CompilerHost.getSourceFile throws on non existent files
All of these are true in G3.
PR Close#20041
Right now HEAD and 5.0.x have a branch deviation and therefore
all the commits between both branches are being compared. There
exists a problematic commit which has a commit message that is
longer than 100 commits. This patch will temporarily increase
the limit to 120 so that CI passes. Once master is resumed to
being the primary development branch (once 5.0.0 is out) then
the the msg limit will be set back to 100.
* don't reexport symbols that the user already reexported
* never reexport symbols that are part of arguments of non simple function calls
Fixes#19883
PR Close#19884
This change coincidentally updates other packages that were in `package.json`
because it regenerates `yarn.lock`. This too should be fine.
PR Close#19985
This adds the proper bindings for calling angular packages from platform-server in the UMD.
This was not a problem for universal apps that dont use UMD.
Fixes 19899
This also changes the compiler so that we throw less often
on structural changes and produce a meaningful state
in the `ng.Program` in case of errors.
Related to #19951
PR Close#19953
Previously, `listLazyRoute` would store invalid information in a compiler
internal cache, which lead to incorrect paths that were used during emit.
This commit fixes this.
PR Close#19953
Observable.merge was called using .call() as if it were an operator
and not an Observable factory. This removes the .call() and uses
the factory properly.
PR Close#19962
Importing ServiceWorkerModule.register() will schedule registration of
the Service Worker inside an APP_INITIALIZER. Previously, the Promise
returned by navigator.serviceWorker.register() was returned from the
initializer function. This has the unwanted side effect of blocking
initialization until the SW is registered. Even worse, if the SW script
fails to load, this can cause the app initialization to fail.
The solution is to not return the registration promise from the
initializer function, essentially decoupling registration from the rest
of the initialization flow.
This change is not unit testable as there are no mocks/adapters yet for
navigator.serviceWorker. A future integration test should cover this case
with better fidelity.
PR Close#19936
Currently, the SwUpdate service doesn't receive messages from the SW.
This is because it attempts to subscribe to the 'message' event on
ServiceWorkerRegistration, when really messages are emitted by the
ServiceWorkerContainer.
This change moves to listening on ServiceWorkerContainer and changes
the mocks to reflect the way the browser actually works.
PR Close#19954
The path mapping was broken for Windows by fc0b1d5b61.
Fixed the path mapping and put code in place to make such a problem
to sneek by again.
PR Close#19915
The error collector changes behavior of the metadata resolver
in ways that haven't been fully hardened. This changes limits
its use to the lazy route detection and the language service.
Issue: #19906
PR Close#19912
This change is needed to prevent users’ builds from breaking.
If a user sets `fullTemlateTypeCheck` to true, we will
continue to check the templates even when `skipTemplateCodegen` is true
as well.
Related to #19906
PR Close#19909
This fixes a problem introduced in 8d45fefc31
which modified how diagnostic error messages are reported for structural
metadata errors causing some of the diagnostics to be lost.
PR Close#19886
Usages of `NgTools_InternalApi_NG_2` from `@angular/compiler-cli` will now
throw an error.
Adds `listLazyRoutes` to `@angular/compiler-cli/ngtools2.ts` for getting
the lazy routes of a `ng.Program`.
PR Close#19836
There is no difference in runtime (yet) between versioned and unversioned
files. Theoretically, the SW does not have to cache-bust versioned files,
but the SW doesn't cache bust files on the first request anyway, so in the
common case it doesn't matter. If the hash doesn't match, the SW will cache
bust the file to be sure, which is technically unnecessary, but since the
file itself is versioned, the likelihood of this happening is rare.
This fixes a critical bug where versioned files were erroneously not included
in the hashTable in the generated manifest. This could lead to applications
not updating if only versioned files changed in between versions.
PR Close#19837
The GaService and the E2E specs were unnecessarily complicated and had
arbitrary async timeouts to ensure that the interplay between the GA
library code and the rest of the app worked correctly. This resulted
in potential flaky tests if the timeouts were not adequate; this was
experienced when Travis upgraded to Chrome 62.
The new approach is to block loading of the Analytics library altogether
if there is a `__e2e__` flag set in the `SessionStorage` of the browser.
It doesn't appear to be enough just to set the flag directly on the
window. I think this is because the window gets cleaned when navigation
occurs (but I am not certain).
The downside of this is that we had to add a small piece of extra logic
to the GA snippet in index.html; and we also had to switch from using
`<script async ...>` to a programmatic approach to loading the GA library
which prevents the browser from eagerly fetching the library. This may
be mitigated by adding it to the HTTP/2 push configuration of the Firebase
hosting.
Re-enables the test that was disabled in https://github.com/angular/angular/pull/19784Closes#19785
As this is the only version range that we tested against in G3.
We will support newer versions of TypeScript soon
after the Angular 5 release.
Closes#19750
PR Close#19787
References to resources (such as .css files) that are generated into
the `outDir` directory outside of `rootDir` would cause a spurious
compiler error about not being able to find a files that ends in
'.ngstyle.ts'.
Also fixed a minor issue in compiler error reporting
Fixes: #19765, #19767
PR Close#19770
PushEvent.data is not the data object itself, but an instance representing
the data in wire format, with methods to synchronously decode it to JSON,
ArrayBuffer, etc. NGSW assumes all push data is in JSON format.
PR Close#19764
When Cache.put() is called with a Response, it consumes the response. If
the Response is used for any other purpose (such as satisfying the
original FetchEvent) it must be cloned first.
A bug exists in the mocks used for SW tests, where this condition is not
validated. The bodies of MockResponses can be utilized repeatedly without
erroring in the same way that a real browser would. This bug is fixed by
this commit, which causes tests for the freshness strategy of data caching
to start failing.
The cause of this failure is a second bug in the data caching code, where
the Response is not cloned prior to being passed to Cache.put(). This is
also fixed.
PR Close#19764
If no user files changed:
- only type check the changed generated files
Never emit non changed generated files
- we still calculate them, but don’t send them through
TypeScript to emit them but cache the written files instead.
PR Close#19646
Before, as soon as a user called `TestBed.overrideProvider` for a provider
of a `NgModule` that was imported via `TestBed.configureTestingModule`,
that `NgModule` became lazy.
This commit changes this behavior to keep the `NgModule` eager,
with or without a call to `TestBed.overrideProvider`.
PR Close#19624
This allows use to fix `TestBed.overrideProvider` to keep imported `NgModule`s eager,
while allowing our users to still keep the old semantics until they have fixed their
tests.
PR Close#19558
Revises both universal and client build to use AOT and webpack for both.
Guide text adjusted accordingly
Dodges CLI client build, expected in near future.
PR Close#18707
This CL refactors the animation AST code to make use of interfaces instead of classes. Given that interfaces are not persisted during runtime the removal of classes should nicely cut down on size for the animations-browser bundle.
-- before --
animations-browser.umd.js = 222kb
animations-browser.umd.min.js = 107kb
-- after --
animations-browser.umd.js = 213kb
animations-browser.umd.min.js = 102kb
PR Close#19539
This CL refactors the animation AST code to make use of interfaces instead of classes. Given that interfaces are not persisted during runtime the removal of classes should nicely cut down on size for the animations-browser bundle.
-- before --
animations-browser.umd.js = 222kb
animations-browser.umd.min.js = 107kb
-- after --
animations-browser.umd.js = 213kb
animations-browser.umd.min.js = 102kb
PR Close#19539
Assocating each template node with a the generated TypeScript
generated overly verbose source maps. Changed to creating a
source map entry per unique source span instead of each
unique template ast node.
Fixes: #19537
PR Close#19578
This helps hazel as it does not check libraries (e.g. the default lib) which are
not input files, but still checks `.d.ts` files that are inputs.
PR Close#19581
The tooling for boilerplate was also running `yarn install` on the examples'
shared folder. But since this is handled by `ng-packages-installer` this
commit refactors the tools so that the boilerplate no longer does this
anymore.
PR Close#19511
The new v5 version of this toolkit is too incompatible for us to run
AIO against both versions. So for now we will ignore this libary when
running against local Angular distributions and continue to use the
version on npm.
PR Close#19511
This commit fixes several issues discovered through use in real apps.
* The sha1() function operated on text content, causing issues for binary-format files.
A sha1Binary() function which operates on unparsed data now avoids any encoding issues.
* The characters '?' and '+' were not escaped in Glob-to-regex conversion previously, but
are now.
* URLs from the browser contain the full origin, but were checked against the table of
hashes from the manifest which only has the path for URLs from the same origin. Now the
origin is checked and URLs are relativized to the domain root before comparison if
appropriate.
* ngsw: prefix was missing from data groups, is now added.
* Occasionally servers will return a redirected response for an asset, and caching it could
cause errors for navigation requests. The SW now handles this by detecting such responses
and following the redirect manually, to avoid caching a redirected response.
* The request for known assets is now created from scratch from the URL before fetching from
the network, in order to sanitize it and avoid carrying any special modes or headers that
might result in opaque responses.
* Debugging log for troubleshooting.
* Avoid creating errors by returning 504 responses on error.
* Fix bug where idle queue doesn't run in some circumstances.
* Add tests for the above.
This is important to not confuse users nor downstream tools that
consume our source maps. For generated content for which we don’t
have an original source file, we use the generated file now.
Fixes#19538
The current `flattenSummaries` function re-process the same NgModule
summary even if it has been processed before. Certain modules like
CommonModule are repeated multiple times in the module tree and it is
expanded out every time.
This was making unit tests using AOT summaries really slow. This will
also slow down JIT bootstrap applications that load AOT summaries for
component libraries.
The fix is to remember which summaries were seen before and not to
process them again.
Each node now has two index: nodeIndex and checkIndex.
nodeIndex is the index in both the view definition and the view data.
checkIndex is the index in in the update function (update directives and update
renderer).
While nodeIndex and checkIndex have the same value for now, having both of them
will allow changing the structure of view definition after compilation (ie for
runtime translations).
Upgrading to dgeni-packages 0.21.4 gives us
access to more properties on the API docs, which
allows us to fix the following issues:
Closes#19450Closes#19452Closes#19456
For now, we always create all generated files, but diff them
before we pass them to TypeScript.
For the user files, we compare the programs and only emit changed
TypeScript files.
This also adds more diagnostic messages if the `—diagnostics` flag
is passed to the command line.
This service worker is a conceptual derivative of the existing @angular/service-worker maintained at github.com/angular/mobile-toolkit, but has been rewritten to support use across a much wider variety of applications.
Entrypoints include:
@angular/service-worker: a library for use within Angular client apps to communicate with the service worker.
@angular/service-worker/gen: a library for generating ngsw.json files from glob-based SW config files.
@angular/service-worker/ngsw-worker.js: the bundled service worker script itself.
@angular/service-worker/ngsw-cli.js: a CLI tool for generating ngsw.json files from glob-based SW config files.
Closure no longer needs to have the imports rewritten avoid rewriting
as this can cause issues when the source directory structure differs
from what is deployed.
Fixes: #19026
This is needed as:
- closure declares globals itself for minified names, which sometimes clobber our `ng` global
- we can't declare a closure extern as the namespace `ng` is already used within Google for typings for angularJS (via `goog.provide('ng....')`).
This is necessary to enable type-based optimizations with Closure.
Without explicity making these options the same named type, Closure
thinks they are different types and cannot disambiguate the `fromObject`
property.
Added the compiler options `strictInjectionParameters` that defaults
to `false`. If enabled the compiler will report errors for parameters
of an `@Injectable` that cannot be determined instead of generating a
warning.
This is planned to be switched to default to `true` for Angular 6.0.
Also adds auto upgrade from lower version based
on the .d.ts file (e.g. from version 3 to 4).
This is needed as we are now also capturing type aliases
in metadata files (and we rely on this),
see 6e3498ca8e.
`ng build ...` must be the last command on the corresponding yarn script,
because it needs to be passed extra arguments (such as the target environment)
in specific cases.
This commit allows building angular.io against the locally built Angular
packages. It adds two new npm scripts:
- `setup-local`: Same as `setup`, but overwrites the Angular packages for both
angular.io and the examples boilerplate with the locally built ones.
- `build-local`: Same as `build`, but uses `setup-local` instead of `setup`
under the hood, thus overwriting installed Angular packages with locally built
ones.
Fixes#18611
The new expression lowering lowers everything after `useValue` / `useFactory`
into a separate exported variable. If the value was a `forwardRef`, this
was passed to the runtime and resulted in errors.
This change unwraps `forwardRef`s during runtime again.
Note: we can’t unwrap the `forwardRef` into an exported variable
during compile time, as this would defeat the purpose of the
`forwardRef` in referring to something that can’t be referred to
at this position.
introduce the option `allowEmptyCodegenFiles` to generate all generated files,
even if they are empty.
- also provides the original source files from which the file was generated
in the write file callback
- needed e.g. for G3 when copying over pinto mod names from the original component
to all generated files
use `importAs` from flat modules when writing summaries
- i.e. prevents incorrect entries like @angular/common/common in the .ngsummary.json files.
change interaction between ng and ts to prevent race conditions
- before Angular would rely on TS to first read the file for which we generate files,
and then the generated files. However, this can break easily when we reuse an old program.
don’t generate files for sources that are outside of `rootDir`
(see #19337)
closes#19352
Previously, the upload server (for PR previews) was run as root and
"downleveled" to a non-privileged user from inside the node script.
Now, with the latest version of `pm2` (which is used to run the upload server
scripts), we can get rid of that workaround and set the desired UID directly
through `pm2`.
This change will enable people to link to the API docs via their selectors
or names, as used in a template.
Since the selectors can be quite complex we are not able to get 100%
accuracy.
Closes#16787
For classes, the tree of subclasses is rendered, recursively.
For interfaces, the descendants are separated into child interfaces, which
extend the interface, and classes, which implement the interface.
Closes#19306
TransferState provides a shared store that is transferred from the
server to client. To use it import BrowserTransferStateModule from the
client app module and ServerTransferStateModule from the server app
module and TransferState will be available as an Injectable object.
PR Close#19134
With this commit `ngc` is used instead of `tsc-wrapped` for
collecting metadata and tsickle rewriting and `tsc-wrapped`
is removed from the repository.
`@angular/tsc-wrapped@5` is now deprecated and is no longer
used, updated, or maintained as part as of Angular 5.x.x.
`@angular/tsc-wrapped@4` is still maintained and required by
Angular 4.x.x and will be maintained as long as 4.x.x is in
LTS.
PR Close#19298
- optimize the way node flags are propagated in `viewDef()`,
- fix `elementDef()` signature to make `namespaceAndName` nullable,
- move render parent computation with the parent computation
PR Close#19272
It doesn't make any difference in this case, because the we only check the
property for truthfulness (and being undefined has the same effect as being set
to false).
PR Close#19180
previously we relied on yarn creating a new project/package.json in the current dirrectory,
which is incorrect. this change inits the project before installing the cli.
PR Close#19297
- tells reader about `yarn serve-and-sync`.
- directs reader to look to docs-style-guide if get doc build error.
- update docs-style-guide to warn about ignored code files.
PR Close#19276
Replaces iterator facade over the HeroService because webpack threw up.
Also this was an obscure distraction for readers with no obvious benefits.
PR Close#18965
- don’t regenerate code for .d.ts files when
an oldProgram is passed to `createProgram`
- cache `fileExists` / `getSourceFile` / `readFile` in watch mode
- refactor tests to share common code in `test_support`
- support `—diagnostic` command line to print total time
used per watch mode compilation.
PR Close#19275
This flag controls whether the compiler emits generated files.
It is initially calculated via `skipTemplateCodegen` from the
compiler options.
Also:
- adds a small performance improvement to not generate the files
at all if we don’t emit generated code.
- removes `EmitFlags.Summaries` as we never used it.
PR Close#19275
We now create 2 programs with exactly the same fileNames and
exactly the same `import` / `export` declarations,
allowing TS to reuse the structure of first program
completely. When passing in an oldProgram and the files didn’t change,
TS can also reuse the old program completely.
This is possible buy adding generated files to TS
in `host.geSourceFile` via `ts.SourceFile.referencedFiles`.
This commit also:
- has a minor side effect on how we generate shared stylesheets:
- previously every import in a stylesheet would generate a new
`.ngstyles.ts` file.
- now, we only generate 1 `.ngstyles.ts` file per entry in `@Component.styleUrls`.
This was required as we need to be able to determine the program files
without loading the resources (which can be async).
- makes all angular related methods in `CompilerHost`
optional, allowing to just use a regular `ts.CompilerHost` as `CompilerHost`.
- simplifies the logic around `Compiler.analyzeNgModules` by introducing `NgAnalyzedFile`.
Perf impact: 1.5s improvement in compiling angular io
PR Close#19275
The private classes `ApplicationRef_`, `PlatformRef_`, `JSONPConnection_`, `JSONPBackend_`, `ClientMessageBrokerFactory_`, `ServiceMessageBroker_`, `ClientMessageBroker_` and `ServiceMessageBrokerFactory_` have been removed and merged into their public equivalents.
The size of the minified umd bundles have been slightly decreased:
| package | before | after |
| -------------------|------------|------------|
| core | 217.791 kb | 217.144 kb |
| http | 33.260 kb | 32.838 kb |
| platform-webworker | 56.015 kb | 54.933 kb |
PR Close#19143
This speeds up the compilation process significantly.
Also introduces a new option `fullTemplateTypeCheck` to do more checks in templates:
- check expressions inside of templatized content (e.g. inside of `<div *ngIf>`).
- check the arguments of calls to the `transform` function of pipes
- check references to directives that were exposed as variables via `exportAs`
PR Close#19152
- temporarily keeps the old sources under packages/tsc-wrapped
until the build scripts are changed to use compiler-cli everywhere.
- removes the compiler options `disableTransformerPipeline` that was introduced
in a previous beta of Angular 5, i.e. the transformer based compiler
is now always enabled.
PR Close#18966
Add testability hook to downgraded component so that protractor can wait for asynchronous call to complete.
Add unregisterApplication() and unregisterAllApplications() to testability registry for cleaning up testability and unit test.
Domino doesn't support innerText. So the actual inner text wasn't
getting set if the [innerText] was set on an element in a template. Add
it to the domino adapter to map it to textContent.
Also change wrongly named initParse5Adapter to initDominoAdapter.
By adding a more relaxed search on the title
of docs, we are more likely to catch API docs.
The additional search terms match anything
with a word in the title that starts with the
characters of the first term in the search.
E.g. if the search is "ngCont guide" then
search for "ngCont guide titleWords:ngCont*"
A multi RENDER_MODULE_HOOK provider can provide function that will be called with the current document just before the document is rendered to
string.
This hook can for example be used for the state transfer module to serialize any server state that needs to be transported to the client, just before the current platform state is rendered to string.
PR Close#19023
* The problem was with the `fireChildActivationStart` function. It was taking a `path` param, which was an
array of `ActivatedRouteSnapshot`s. The function was being fired for each piece of the route that was being
activated. This resulted in far too many `ChildActivationStart` events being fired, and being fired on routes
that weren't actually getting activated. This change fires the event only for those routes that are actually
being activated.
fixes#18942
PR Close#19043
* Introduced with #18407, `RouteEvents` don't actually have a common constructor. Reverting here to be able to add new functionality to ChildActivation events.
PR Close#19043
BREAKING CHANGE: the compiler option `enableLegacyTemplate` is now disabled by default as the `<template>` element has been deprecated since v4. Use `<ng-template>` instead. The option `enableLegacyTemplate` and the `<template>` element will both be removed in Angular v6.
PR Close#18756
* Remove now unnecessary portions of build.
* Add a compilePackageES5 method to build ES5 from sources
* Rework all package.json and rollup config files to new format
* Remove "extends" from tsconfig-build.json files and fixup compilation roots
PR Close#18541
This is a corner case, and converting them is what
was expected in G3. This also fits the fact that
we already convert package paths into relative paths.
PR Close#18912
With this change ngc now accepts a `-w` or a `--watch`
command-line option that will automatically perform a
recompile whenever any source files change on disk.
PR Close#18818
With this commit the compiler will "lower" expressions into exported
variables for values the compiler does not need to know statically
in order to be able to generate a factory. For example:
```
providers: [{provider: 'token', useValue: calculated()}]
```
produced an error as the expression `calculated()` is not supported
by the compiler because `calculated` is not a
[known function](https://angular.io/guide/metadata#annotationsdecorators)
With this commit this is rewritten, during emit of the .js file, into
something like:
```
export var ɵ0 = calculated();
...
provdiers: [{provider: 'token', useValue: ɵ0}]
```
The compiler then will now generate a reference to the exported `ɵ0`
instead of failing to evaluate `calculated()`.
PR Close#18905
With this change ngc now accepts a `-w` or a `--watch`
command-line option that will automatically perform a
recompile whenever any source files change on disk.
PR Close#18818
With this commit the compiler will "lower" expressions into exported
variables for values the compiler does not need to know statically
in order to be able to generate a factory. For example:
```
providers: [{provider: 'token', useValue: calculated()}]
```
produced an error as the expression `calculated()` is not supported
by the compiler because `calculated` is not a
[known function](https://angular.io/guide/metadata#annotationsdecorators)
With this commit this is rewritten, during emit of the .js file, into
something like:
```
export var ɵ0 = calculated();
...
provdiers: [{provider: 'token', useValue: ɵ0}]
```
The compiler then will now generate a reference to the exported `ɵ0`
instead of failing to evaluate `calculated()`.
PR Close#18905
Fixes#14638
Uses Domino - https://github.com/fgnass/domino and removes dependency on
Parse5.
The DOCUMENT and nativeElement were never typed earlier and were
different on the browser(DOM nodes) and the server(Parse5 nodes). With
this change, platform-server also exposes a DOCUMENT and nativeElement
that is closer to the client. If you were relying on nativeElement on
the server, you would have to change your code to use the DOM API now
instead of Parse5 AST API.
Removes the need to add services for each and every Document
manipulation like Title/Meta etc.
This does *not* provide a global variable 'document' or 'window' on the
server. You still have to inject DOCUMENT to get the document backing
the current platform server instance.
Currently HttpClient sends requests for JSON data with the
XMLHttpRequest.responseType set to 'json'. With this flag, the browser
will attempt to parse the response as JSON, but will return 'null' on
any errors. If the JSON response contains an XSSI-prevention prefix,
this will cause the browser's parsing to fail, which is unrecoverable.
The only compelling reason to use the responseType 'json' is for
performance (especially if the browser offloads JSON parsing to a
separate thread). I'm not aware of any browser which does this currently,
nor of any plans to do so. JSON.parse and responseType 'json' both
end up using the same V8 code path in Chrome to implement the parse.
Thus, this change switches all JSON parsing in HttpClient to use
JSON.parse directly.
Fixes#18396, #18453.
PR Close#18466
Today, constructing a new GET request with headers looks like:
const headers = new HttpHeaders({
'My-Header': 'header value',
});
http.get('/url', {headers}).subscribe(...);
This indirection is unnecessary. It'd be more ergonomic to write:
http.get('/url', {headers: {'My-Header': 'header value'}}).subscribe(...);
This commit allows that new syntax, both for HttpHeaders and HttpParams.
In the HttpParams case it also allows construction of HttpParams with a map.
PR Close#18490
This is needed as the typescript no longer elides type reexports
in the generated code when using transformers.
A nice side effect is that this make summaries shorter and produces
less reexports as we rollup reexports.
PR Close#18788
Previously, we only did this when setting the `generateCodeForLibraries: false`.
This is needed so that libraries compiled with `generateCodeForLibraries: true` can be used as dependencies of other compilation units.
PR Close#18788
BREAKING CHANGE: `RouterOutlet` properties `locationInjector` and `locationFactoryResolver` have been removed as they were deprecated since v4.
PR Close#18781
BREAKING CHANGE: the values `true`, `false`, `legacy_enabled` and `legacy_disabled` for the router parameter `initialNavigation` have been removed as they were deprecated. Use `enabled` or `disabled` instead.
PR Close#18781
CompilerConfig should be the only source of default settings for preserveWhitespaces
so let's not enforce defaults on the CompilerOptions level.
PR Close#18772
BREAKING CHANGE: Because of multiple bugs and browser inconsistencies, we have dropped the intl api in favor of data exported from the Unicode Common Locale Data Repository (CLDR).
Unfortunately we had to change the i18n pipes (date, number, currency, percent) and there are some breaking changes.
1. I18n pipes
* Breaking change:
- By default Angular now only contains locale data for the language `en-US`, if you set the value of `LOCALE_ID` to another locale, you will have to import new locale data for this language because we don't use the intl API anymore.
* Features:
- you don't need to use the intl polyfill for Angular anymore.
- all i18n pipes now have an additional last parameter `locale` which allows you to use a specific locale instead of the one defined in the token `LOCALE_ID` (whose value is `en-US` by default).
- the new locale data extracted from CLDR are now available to developers as well and can be used through an API (which should be especially useful for library authors).
- you can still use the old pipes for now, but their names have been changed and they are no longer included in the `CommonModule`. To use them, you will have to import the `DeprecatedI18NPipesModule` after the `CommonModule` (the order is important):
```ts
import { NgModule } from '@angular/core';
import { CommonModule, DeprecatedI18NPipesModule } from '@angular/common';
@NgModule({
imports: [
CommonModule,
// import deprecated module after
DeprecatedI18NPipesModule
]
})
export class AppModule { }
```
Dont forget that you will still need to import the intl API polyfill if you want to use those deprecated pipes.
2. Date pipe
* Breaking changes:
- the predefined formats (`short`, `shortTime`, `shortDate`, `medium`, ...) now use the patterns given by CLDR (like it was in AngularJS) instead of the ones from the intl API. You might notice some changes, e.g. `shortDate` will be `8/15/17` instead of `8/15/2017` for `en-US`.
- the narrow version of eras is now `GGGGG` instead of `G`, the format `G` is now similar to `GG` and `GGG`.
- the narrow version of months is now `MMMMM` instead of `L`, the format `L` is now the short standalone version of months.
- the narrow version of the week day is now `EEEEE` instead of `E`, the format `E` is now similar to `EE` and `EEE`.
- the timezone `z` will now fallback to `O` and output `GMT+1` instead of the complete zone name (e.g. `Pacific Standard Time`), this is because the quantity of data required to have all the zone names in all of the existing locales is too big.
- the timezone `Z` will now output the ISO8601 basic format, e.g. `+0100`, you should now use `ZZZZ` to get `GMT+01:00`.
| Field type | Format | Example value | v4 | v5 |
|------------|---------------|-----------------------|----|---------------|
| Eras | Narrow | A for AD | G | GGGGG |
| Months | Narrow | S for September | L | MMMMM |
| Week day | Narrow | M for Monday | E | EEEEE |
| Timezone | Long location | Pacific Standard Time | z | Not available |
| Timezone | Long GMT | GMT+01:00 | Z | ZZZZ |
* Features
- new predefined formats `long`, `full`, `longTime`, `fullTime`.
- the format `yyy` is now supported, e.g. the year `52` will be `052` and the year `2017` will be `2017`.
- standalone months are now supported with the formats `L` to `LLLLL`.
- week of the year is now supported with the formats `w` and `ww`, e.g. weeks `5` and `05`.
- week of the month is now supported with the format `W`, e.g. week `3`.
- fractional seconds are now supported with the format `S` to `SSS`.
- day periods for AM/PM now supports additional formats `aa`, `aaa`, `aaaa` and `aaaaa`. The formats `a` to `aaa` are similar, while `aaaa` is the wide version if available (e.g. `ante meridiem` for `am`), or equivalent to `a` otherwise, and `aaaaa` is the narrow version (e.g. `a` for `am`).
- extra day periods are now supported with the formats `b` to `bbbbb` (and `B` to `BBBBB` for the standalone equivalents), e.g. `morning`, `noon`, `afternoon`, ....
- the short non-localized timezones are now available with the format `O` to `OOOO`. The formats `O` to `OOO` will output `GMT+1` while the format `OOOO` will be `GMT+01:00`.
- the ISO8601 basic time zones are now available with the formats `Z` to `ZZZZZ`. The formats `Z` to `ZZZ` will output `+0100`, while the format `ZZZZ` will be `GMT+01:00` and `ZZZZZ` will be `+01:00`.
* Bug fixes
- the date pipe will now work exactly the same across all browsers, which will fix a lot of bugs for safari and IE.
- eras can now be used on their own without the date, e.g. the format `GG` will be `AD` instead of `8 15, 2017 AD`.
3. Currency pipe
* Breaking change:
- the default value for `symbolDisplay` is now `symbol` instead of `code`. This means that by default you will see `$4.99` for `en-US` instead of `USD4.99` previously.
* Deprecation:
- the second parameter of the currency pipe (`symbolDisplay`) is no longer a boolean, it now takes the values `code`, `symbol` or `symbol-narrow`. A boolean value is still valid for now, but it is deprecated and it will print a warning message in the console.
* Features:
- you can now choose between `code`, `symbol` or `symbol-narrow` which gives you access to more options for some currencies (e.g. the canadian dollar with the code `CAD` has the symbol `CA$` and the symbol-narrow `$`).
4. Percent pipe
* Breaking change
- if you don't specify the number of digits to round to, the local format will be used (and it usually rounds numbers to 0 digits, instead of not rounding previously), e.g. `{{ 3.141592 | percent }}` will output `314%` for the locale `en-US` instead of `314.1592%` previously.
Fixes#10809, #9524, #7008, #9324, #7590, #6724, #3429, #17576, #17478, #17319, #17200, #16838, #16624, #16625, #16591, #14131, #12632, #11376, #11187
PR Close#18284
BREAKING CHANGE: `NgFor` has been removed as it was deprecated since v4. Use `NgForOf` instead. This does not impact the use of`*ngFor` in your templates.
PR Close#18758
Prior to this fix if @parent and @child animations ran at the same
time within a disabled region then there was a chance that a @child
sub animation would never complete. This would cause *directives to
never close a removal when a @child trigger was placed on them. This
patch fixes this issue.
PR Close#18715
Prior to fix this fix, @.disabled would only work to disable child
animations. Now it will also disable animations for the element that has
the @.disabled flag (which makes more sense).
PR Close#18714
Windows paths have back slashes, but TypeScript expects to always have forward slashes.
In other places where this call happens (like `src/compiler_host.ts`) the same fix is present.
PR Close#18784
BREAKING CHANGE: `NgTemplateOutlet#ngOutletContext` has been removed as it was deprecated since v4. Use `NgTemplateOutlet#ngTemplateOutletContext` instead.
PR Close#18780
BREAKING CHANGE: `DifferFactory.create` no longer takes ChangeDetectionRef as a first argument as it was not used and deprecated since v4.
PR Close#18757
The fixed test expected there to be a doc version without a URL. This used to be
the case but not any more. As a result, an error was logged in the test output
(but no failure).
This commit fixes it by ensuring that a version without a URL exists.
PR Close#18659
BREAKING CHANGE: `NgProbeToken` has been removed from `@angular/platform-browser` as it was deprecated since v4. Import it from `@angular/core` instead.
PR Close#18760
After this, neither @angular/compiler nor @angular/comnpiler-cli depend
on @angular/core.
This add a duplication of some interfaces and enums which is stored
in @angular/compiler/src/core.ts
BREAKING CHANGE:
- `@angular/platform-server` now additionally depends on
`@angular/platform-browser-dynamic` as a peer dependency.
PR Close#18683
This change allows users to specify multiple exportAs names for a
directive by giving a comma-delimited list inside the string.
The primary motivation for this change is to allow these names to be
changed in a backwards compatible way.
This commit introduces a new Input property called
`ngFormOptions` to the `NgForm` directive. You can use it
to set default `updateOn` values for all the form's child
controls. This default will be used unless the child has
already explicitly set its own `updateOn` value in
`ngModelOptions`.
Potential values: `change` | `blur` | `submit`
```html
<form [ngFormOptions]="{updateOn: blur}">
<input name="one" ngModel> <!-- will update on blur-->
</form>
```
For more context, see [#18577](https://github.com/angular/angular/pull/18577).
This also allows to customize the filePaths in `.ngsummary.json` file
via the new methods `toSummaryFileName` and `fromSummaryFileName`
on the `CompilerHost`.
Removes the tsickle dependency added when tsickle was added to the
transform compiler.
Added a test to ensure stray dependencies are not added and no
errors are introduced during module flattening.
toString() from DefaultIterableDiffer is only used in tests and should not
be part of the production code. toString() methods from differs add
~ 0.3KB (min+gzip) to the production bundle size.
This commit introduces a new option to template-driven forms that
improves performance by delaying form control updates until the
"blur" or "submit" event. To use it, set the `updateOn` property
in `ngModelOptions`.
```html
<input ngModel [ngModelOptions]="{updateOn: blur}">
```
Like in AngularJS, setting `updateOn` to `blur` or `submit` will
delay the update of the value as well as the validation status.
Updating value and validity together keeps the system easy to reason
about, as the two will always be in sync. It's also worth noting
that the value/validation pipeline does still run when the form is
initialized (in order to support initial values).
Upcoming PRs will address:
* Support for setting group-level `updateOn` in template-driven forms
* Option for skipping initial validation run or more global error
display configuration
* Better support of reactive validation strategies
See more context in #18408, #18514, and the [design doc](https://docs.google.com/document/d/1dlJjRXYeuHRygryK0XoFrZNqW86jH4wobftCFyYa1PA/edit#heading=h.r6gn0i8f19wz).
BREAKING CHANGE
It is no longer possible to declare classes in this format.
```
Component({...}).
Class({
constructor: function() {...}
})
```
This format would only work with JIT and with ES5. This mode doesn’t
allow build tools like Webpack to process and optimize the code, which
results in prohibitively large bundles. We are removing this API
because we are trying to ensure that everyone is on the fast path by
default, and it is not possible to get on the fast path using the ES5
DSL. The replacement is to use TypeScript and `@Decorator` format.
```
@Component({...})
class {
constructor() {...}
}
```
The source map does not currently work with the transformer pipeline.
It will be re-enabled after TypeScript 2.4 is made the min version.
To revert to the former compiler, use the `disableTransformerPipeline` in
tsconfig.json:
```
{
"angularCompilerOptions": {
"disableTransformerPipeline": true
}
}
```
This commit adds support for setting default `updateOn` values
in `FormGroups` and `FormArrays`. If you set `updateOn` to
’blur’` at the group level, all child controls will default to `’blur’`,
unless the child has explicitly specified a different `updateOn` value.
```
const c = new FormGroup({
one: new FormControl()
}, {updateOn: blur});
```
It's worth noting that parent groups will always update their value and
validity immediately upon value/validity updates from children. In other
words, if a group is set to update on blur and its children are individually
set to update on change, the group will still update on change with its
children; its default value will simply not be used.
This commit also updates the version of `@angular/cli` used for docs examples.
The previous (transient) dependency `@ngtools/webpack` was not compatible with
`@angular/compiler-cli@>=5` and was breaking when running against the local
builds (currently at 5.0.0-beta.2). The version of `@ngtools/webpack` used by
the latest `@angular/cli` version is compatible with `@angular/compiler-cli@5`.
This change allows ReflectiveInjector to be tree shaken resulting
in not needed Reflect polyfil and smaller bundles.
Code savings for HelloWorld using Closure:
Reflective: bundle.js: 105,864(34,190 gzip)
Static: bundle.js: 154,889(33,555 gzip)
645( 2%)
BREAKING CHANGE:
`platformXXXX()` no longer accepts providers which depend on reflection.
Specifically the method signature when from `Provider[]` to
`StaticProvider[]`.
Example:
Before:
```
[
MyClass,
{provide: ClassA, useClass: SubClassA}
]
```
After:
```
[
{provide: MyClass, deps: [Dep1,...]},
{provide: ClassA, useClass: SubClassA, deps: [Dep1,...]}
]
```
NOTE: This only applies to platform creation and providers for the JIT
compiler. It does not apply to `@Compotent` or `@NgModule` provides
declarations.
Benchpress note: Previously Benchpress also supported reflective
provides, which now require static providers.
DEPRECATION:
- `ReflectiveInjector` is now deprecated as it will be remove. Use
`Injector.create` as a replacement.
closes#18496
Problem description: when using ngTemplateOutlet with context as
an object literal in a template and binding to the context's property
the embedded view would get re-created even if context object remains
essentially the same (the same shape, just update to one properties).
This happens since currently change detection will re-create object
references when an object literal is used and one of its properties
gets updated through a binding.
Solution: this commit changes ngTemplateOutlet logic so we take
context object shape into account before deciding if we should
re-create view or just update existing context.
Fixes#13407
There are now 3 modes for deployment: next, stable, archive.
We compute which mode (and other deployment properties)
from the `TRAVIS_BRANCH` and the `STABLE_BRANCH`.
If the TRAVIS_BRANCH is master we deploy as "next".
If the `TRAVIS_BRANCH` matches the `STABLE_BRANCH` we deploy as "stable".
Otherwise if the branch has a major version lower than the stable version
and its minor version is highest of similar branches we deploy as "archive".
For "archive" deployments we compute the firebase project and deployment
url based on the major version of the `TRAVIS_BRANCH`.
As well as choosing where to deploy the build, we also use this
to select the environment file for the AIO Angular app.
This will enable the app to change its rendering and behaviour
based on its mode.
See #18287Closes#18297
There are now 3 modes for deployment: next, stable, archive.
We compute which mode (and other deployment properties)
from the `TRAVIS_BRANCH` and the `STABLE_BRANCH`.
If the TRAVIS_BRANCH is master we deploy as "next".
Otherwise if the branch is the highest of its minor versions
we deploy as "stable" if the `TRAVIS_BRANCH` matches the `STABLE_BRANCH` or
else "archive".
For "archive" deployments we compute the firebase project and deployment
url based on the major version of the `TRAVIS_BRANCH`.
As well as choosing where to deploy the build, we also use this
to select the environment file for the AIO Angular app.
This will enable the app to change its rendering and behaviour
based on its mode.
See #18287
By default, the value and validation status of a `FormControl` updates
whenever its value changes. If an application has heavy validation
requirements, updating on every text change can sometimes be too expensive.
This commit introduces a new option that improves performance by delaying
form control updates until the "blur" event. To use it, set the `updateOn`
option to `blur` when instantiating the `FormControl`.
```ts
// example without validators
const c = new FormControl(, { updateOn: blur });
// example with validators
const c= new FormControl(, {
validators: Validators.required,
updateOn: blur
});
```
Like in AngularJS, setting `updateOn` to `blur` will delay the update of
the value as well as the validation status. Updating value and validity
together keeps the system easy to reason about, as the two will always be
in sync. It's also worth noting that the value/validation pipeline does
still run when the form is initialized (in order to support initial values).
Closes#7113
This is possibly a temporary fix for the layout, until we decide whether we want
to remove the guide or properly add it to the SideNav menu.
Fixes#17912
The Internationalisation documentation, "Translate text nodes" section, has an incomplete
markdown anchor, and leaks markdown into the page. Fix the anchor by adding the opening bracket.
The static reflectory check for macro function recursion was too
agressive and disallowed calling a function with argument that also
calls the same function. For example, it disallowed nested animation
groups.
Fixes: #17467
FormControls, FormGroups, and FormArrays now optionally accept an options
object as their second argument. Validators and async validators can be
passed in as part of this options object (though they can still be passed
in as the second and third arg as before).
```ts
const c = new FormControl(, {
validators: [Validators.required],
asyncValidators: [myAsyncValidator]
});
```
This commit also adds support for passing arrays of validators and async
validators to FormGroups and FormArrays, which formerly only accepted
individual functions.
```ts
const g = new FormGroup({
one: new FormControl()
}, [myPasswordValidator, myOtherValidator]);
```
This change paves the way for adding more options to AbstractControls,
such as more fine-grained control of validation timing.
The markdown processor expects an empty line between an opening tag and the
markdown content. (If there is no empty line, the content is interpreted as
plain HTML.)
Previously, the line between the opening `<td>` and the content contained
whitespace, which caused the content to be interpreted as HTML and not markdown.
Fixes#18312
PR Close#18349
Angular can make many assumptions about its event handlers. As a result
the bookkeeping for native addEventListener is significantly cheaper
than Zone's addEventLister which can't make such assumptions.
This change bypasses the Zone's addEventListener if present and always
uses the native addEventHandler. As a result registering event listeners
is about 3 times faster.
PR Close#18107
In previous version of tsickle abstract class methods were materialized.
The change resulted in 6Kb savings in angular.io bundle.
This change also required the removal of `@private` and `@return` type
annotation as it is explicitly dissalowed by tsickle.
NOTE: removed casts in front of `makeDecorator` due to:
https://github.com/angular/devkit/issues/45
```
14938 Jul 19 13:16 0.b19e913fbdd6507d346b.chunk.js
1535 Jul 19 13:16 inline.d8e019ea3cfdd86c2bd0.bundle.js
589178 Jul 19 13:16 main.54c97bcb6f254776b678.bundle.js
34333 Jul 19 13:16 polyfills.4a3c9ca9481d53803157.bundle.js
14938 Jul 18 16:55 0.b19e913fbdd6507d346b.chunk.js
1535 Jul 18 16:55 inline.0c83abb44fad9a2768a7.bundle.js
582786 Jul 18 16:55 main.ea290db71b051813e156.bundle.js
34333 Jul 18 16:55 polyfills.4a3c9ca9481d53803157.bundle.js
main savings: 589178 - 582786 = 6,392
```
PR Close#18236
In Node.JS console.log/error/warn functions actually resuls in a socket
write which in turn is considered by Zone.js as an async task.
This means that if there is any exception during change detection in a platform-server
application the error handler will make the Angular Zone unstable which
in turn will cause change detection to run on next tick and cause an
infinite loop.
It is also better to run the error handler outside of the Angular Zone
in general on all platforms so that an error in the error handler itself doesn't cause an
infinite loop.
Fixes#17073, #7774.
PR Close#18269
Note 4.3 only!
Prior to this fix when [@.disabled] was used in a component that
contained zero animation code it wouldn't register properly because the
renderer associated with that component was not an animation renderer.
This patch ensures that it gets registered even when there are no
animations set.
* Tell the app that this will have no Table of Contents, since we have no
h2 headings anyway.
* Remove all the `nbsp;` from the code since that doesn't help with layout
* Remove side padding from sidenav-content when screen is narrow
* Restyle the cheatsheet table when the screen is narrow
Possibly overlooked testing documentation mistake fixed:
- `http.get('/data')` probably ought to be paired with `httpMock.expectOne('/data')` instead of `httpMock.expectOne('/data')`.
Note 4.3 only!
Prior to this fix when [@.disabled] was used in a component that
contained zero animation code it wouldn't register properly because the
renderer associated with that component was not an animation renderer.
This patch ensures that it gets registered even when there are no
animations set.
The API docs have changed. The line numbers are now found in
`startingLine` and `endingLine` properties rather than the `location`
property, which moved into the `fileInfo` property anyway.
In our attempt to remove the material ripple effect from tab labels, we were
killing all `transform`-based animations on other `md-tab-group` elements, such
as animating the content when entering/leaving. (This wasn't an issue on Chrome,
because it didn't respect our `!important` flag.)
This commit fixes it by properly hiding the ripple effect (using a feature
introduced in angular/material2@e4789c7b8) and allowing other animations to
execute normally.
Fixes#17998
Now that we have upgraded to the latest lunr search engine, the results
from the standard `search` method are more appropriate.
So we do not need to create our own special queries to get good results.
Since 808bd4af4, we are no longer pre-verifying PRs before uploading the build
artifacts to the preview server, thus we no longer need the
`travis-preverify-pr.sh` script or the `GITHUB_TEAM_MEMBERSHIP_CHECK_KEY`
variable.
This commit adds an API endpoint for notifying the preview server about PR
updates (`/pr-updated`). According to the update, the preview server can take
several actions. Currently, it will only check and (if necessary) update the
PR's preview visibility (but more actions could be supported in the future).
The API can be used with an automatic trigger (e.g. a GitHub webhook) to
instantly update a PR's preview visibility when it changes.
Fixes#16526
Previously, `BuildCreator#changePrVisibility()` would throw an error if the PR's
visibility was already up-to-date or if the PR directory did not exist (e.g. was
removed). This method was only used from inside `BuildCreator#create()`, which
had already checked for the existence of the directories.
This commit renames `changePrVisibility()` to `updatePrVisibility()` and makes
it more "forgiving" (i.e. it will only throw if both public and non-public
directories exist). This allows it to be used on events that may or may not have
caused the PR's visibility to change (e.g. a GitHub webhook triggered whenever a
PR's labels change).
Previously, there was a distinction between GET requests to invalid URLs and all
other requests. This was mainly because the upload-server only accepts GET
requests, but that is not a hard limitation and may change in the future.
Thus, it makes sense to return a 404 response for requests to invalid URLs
regardless of the method used.
HttpClient is an evolution of the existing Angular HTTP API, which exists
alongside of it in a separate package, @angular/common/http. This structure
ensures that existing codebases can slowly migrate to the new API.
The new API improves significantly on the ergonomics and features of the legacy
API. A partial list of new features includes:
* Typed, synchronous response body access, including support for JSON body types
* JSON is an assumed default and no longer needs to be explicitly parsed
* Interceptors allow middleware logic to be inserted into the pipeline
* Immutable request/response objects
* Progress events for both request upload and response download
* Post-request verification & flush based testing framework
Previouly, whenever a new ServiceWorker update was detected the user was
prompted to update (with a notification). This turned out to be more distracting
than helpful. Also, one would get notifications on all open browser tabs/windows
and had to manually reload each one in order for the whole content (including
the app) to be updated.
This commit changes the update strategy as follows:
- Whenever a new update is detected, it is immediately activated (and all
tabs/windows will be notified).
- Once an update is activated (regardless of whether the activation was
initiated by the current tab/window or not), a flag will be set to do a
"full page navigation" the next time the user navigates to a document.
Benefits:
- All tabs/windows are updated asap.
- The updates are applied authomatically, without the user's needing to do
anything.
- The updates are applied in a way that:
a. Ensures that the app and content versions are always compatible.
b. Does not distract the user from their usual workflow.
NOTE:
The "full page navigation" may cause a flash (while the page is loading from
scratch), but this is expected to be minimal, since at that point almost all
necessary resources are cached by and served from the ServiceWorker.
Fixes#17539
`Object.assign` is not available in all supported browsers and one had to
provide a polyfill. This commit replaces `Object.assign` with the spread
operator (`...`), which TypeScript will transpile to ES5-compatible code.
(#17971)
This commit changes the dynamic version of ngUpgrade to use `UpgradeHelper`,
thus bringing its behavior (wrt upgraded components) much closer to
`upgrade/static`. Fixes/features include:
- Fix template compilation: Now takes place in the correct DOM context, instead
of in a detached node (thus has access to required ancestors etc).
- Fix support for the `$onInit()` lifecycle hook.
- Fix single-slot transclusion (including optional transclusion and fallback
content).
- Add support for multi-slot transclusion (inclusing optional slots and fallback
content).
- Add support for binding required controllers to the directive's controller
(and make the `require` behavior more consistent with AngularJS).
- Add support for pre-/post-linking functions.
(This also ports the fixes from #16627 to the dynamic version.)
Fixes#11044
(#17971)
Although, pre- and post-linking functions are correctly called during directive
linking, directives with `link.post` would throw an error. Interestingly, having
`link.pre` only or defining `link: fn` (which is an alias for `link.post: fn`)
would not throw.
This commit removes this check and allows directives with pre- and/or
post-linking functions to work.
Previously, only simple, single-slot transclusion worked on upgraded components.
This commit fixes/adds support for the following:
- Multi-slot transclusion.
- Using fallback content when no transclusion content is provided.
- Destroy unused scope (when using fallback content).
Fixes#13271
Firebase does not allow `.` in the path, so when trying to upload payload size
data for branches like `4.2.x`, the following error is thrown:
```
HTTP Error: 400, Invalid path: Invalid token in path
```
This commit fixes it by replacing `.` with `_` in branch names.
There have been some issues lately with Travis jobs failing due to
`print-log.sh`. This is likely due to trying to print the Lighthouse PWA report,
which is too large.
This commit stops printing that report (since it was rarely used and is pretty
easy to acquire when needed) and restores the `print-logs.sh` script (that was
temporarily removed with dfcca66fd).
closes#17665
Restores keyboard focus that was removed by commit b8b91d3.
Raises the right-TOC by 20px (96px->76px) because was too far down.
To prevent keyboard focus on hidden child nodes,
also collapses inner expanded nodes when parent node is collapsed.
The implicit parent node of top nodes is always expanded.
The window title is derived based on the current document's `<h1>` heading. Such
headings may contain hidden/non-visible content (e.g. textual name of font
ligatures: `<i class="material-icons">link</i>`) that should not be included in
the title.
This commit fixes this by using `innerText` (instead of `textContent`) to
extract the visible text from the `<h1>` heading. It will still fall back to
`textContent` on browsers that do not support `innerText` (e.g. Firefox 44).
Fixes#17732
Use the 7 first characters of the 40-chars long SHAs for shorter/cleaner URLs.
The collision probability is extremely low (since all SHAs are further
"namespaced" under the corresponding PR). In case of a collision, the second PR
will not be deployed, in order to avoid overwriting the original build.
(This is a design decision to keep the implementation simple. It can be changed
later if necessary.)
The previous clean-up code for PR directories on the preview server assumed that
all directories were named after the PR number. With the changes introduced
in #17640 it is possible to have PR directories that do not follow that naming
convention (e.g. "non-public" directories).
This PR ensures that both public and non-public directories are removed when
cleaning up.
When creating a new docker image for the preview server, the TypeScript source
code in `scripts-js/` is not copied over. Instead only the generated JavaScript
core in `scripts-js/dist/` are. Because of that, it is necessary to have run
`yarn build` before running `docker build`, so that the new docker image
contains the latest changes in `scripts-js/`.
This was previously part of the `create-image.sh` script, but was accidentally
removed in 21d213dfc.
- /deep/ is deprecated and being removed from Chrome
- >>> is semantically invalid in a stylesheet
- sass will no longer support either in any version of sass
-> use ::ng-deep in emulated shadow DOM mode
Because the deep combinator is deprecated in the CSS spec,
`/deep/`, `>>>` and `::ng-deep` are also deprecated in emulated shadow DOM mode
and will be removed in the future.
see https://www.chromestatus.com/features/6750456638341120
This commit introduces the ability to show previews for PRs by any author. It works as follows:
- The build artifacts of all PRs are uploaded to the preview server.
- Automatically verified PRs (i.e. from trusted authors or having a specific label) are deployed and
publicly accessible as usual.
- PRs that could not be automatically verified are stored for later use (after re-verification).
- A PR can be marked as "trusted" and make its preview publicly accessible by adding the GitHub
label specified in the `AIO_TRUSTED_PR_LABEL` env var of the preview server.
At the moment, there is no automatic mechanism for notifying the preview server about changes to the
PR's verification status. The PR's "visibility" will be checked and updated every time a new build
is uploaded.
Before 4f37f8643, we were using `innerText` to retrieved the code content for
copying. This preserved the text layout (including newlines), but suffered from
other issues (browser support, performance). With 4f37f8643 we switched to
`textContent`, which works well except in the following case:
When `prettify` formats the code to have line numbers, it removes the newlines
and uses `<li>` elements instead. This affects `textContent`.
This commit fixes this by keeping a reference of the code as text and using that
for copying.
Fixes#17659
We expect this behavior because it's what Travis does. Also it's better because we want
to test what happens if we merge the PR, not the status of the PR branch.
Running the patch script on Windows (with `patch` available) yields an invalid syntax warning, and does not apply patches.
```
kamik@T460p MINGW64 /d/work/angular/aio (master)
$ yarn postinstall
yarn postinstall v0.24.6
$ node tools/cli-patches/patch.js && uglifyjs node_modules/lunr/lunr.js -c -m -o src/assets/js/lunr.min.js --source-map
The syntax of the command is incorrect.
Done in 1.52s.
```
Destructuring of the form:
function foo({a, b}: {a?, b?} = {})
breaks strictNullChecks, due to the TypeScript bug https://github.com/microsoft/typescript/issues/10078.
This change eliminates usage of destructuring in function argument lists in cases where it would leak
into the public API .d.ts.
toString() from DefaultKeyValueDiffer is only used in tests and should not
be part of the production code. toString() methods from differs add
~ 0.3KB (min+gzip) to the production bundle size.
With 4.2, we introduced the min and max validator directives. This was actually a breaking change because their selectors could include custom value accessors using the min/max properties for their own purposes.
For now, we are rolling back the change by removing the exports. At the least, we should wait to add them until a major version. In the meantime, we will have further discussion about what the best solution is going forward for all validator directives.
Closes#17491.
----
PR #17551 tried to roll this back, but did not remove the dead code. This failed internal tests that were checking that all declared directives were used.
This PR rolls back the original PR and commit the same as #17551 while also removing the dead code.
This version fixes the DISCONNECTED errors (described in #17543) and removes the
need to the workaround (8af203c).
The relevant jasmine commit is jasmine/jasmine@c60d66994.
`innerText` is not supported in Firefox prior to v45. In most cases (at least
the ones we are interested in), `innerText` and `textContent` work equally well,
but `textContent` is more performant (as it doesn't require a reflow).
From [MDN][1] on the differences of `innerText` vs `textContent`:
> - [...]
> - `innerText` is aware of style and will not return the text of hidden
> elements, whereas `textContent` will.
> - As `innerText` is aware of CSS styling, it will trigger a reflow, whereas
> `textContent` will not.
> - [...]
[1]: https://developer.mozilla.org/en-US/docs/Web/API/Node/textContent#Differences_from_innerTextFixes#17585
Previously, we had redirect rules for Firebase for `/docs/ts/latest` and
`/styleguide`, but once the ServiceWorker was activated, it would take over
routing and rewrite these requests to `/index.html`.
This commit fixes it by excluding them from ServiceWorker routing.
Fixes#17542
With 4.2, we introduced the min and max validator directives. This was actually a breaking change because
their selectors could include custom value accessors using the min/max properties for their own purposes.
For now, we are rolling back the change by removing the exports.
Closes#17491.
With SHA 2c3e948e61 the biography of Paul Gschwendtner has been accidentally removed.
This re-adds the biography entry (picture still present) as requested on Slack.
Previously, there was an issue with testing the PWA score on staging and failing
the build was temporarily disabled. It works now, so we need to enable failing
the build is the score drops below some threshold.
The footer background (implemented via `footer:after`) had a higher `z-index`
than other footer elements and was obscuring the footer links on certain
browsers (Firefox, Edge, IE), which made them unclickable.
This commit lowers the index of `footer:after`, so that links are clickable on
these browsers.
Fixes#17460
You can now specify what environment you are building
by add it to the `yarn build` command. For example:
```
yarn build -- --env=stage
```
Moreover the `deploy-to-firebase.sh` script will automatically apply the
appropriate environment.
The API docs tests have very variable run times, depending
upon the build environment.
This change doubles their test timeout values to prevent
false-negative failures.
Previously, we always assumed that elements would be scrolled to the top of the
page, when calling `element.scrollIntoView()`. This is not true for elements
that cannot be scrolled to the top, e.g. when the viewport height is larger than
the height of the content after the element (common for small sections near the
end of the page).
In such cases, we would unnecessarily scroll up to account for the static
toolbar, which was unnecessary (since the element was not behind the toolbar
anyway) and caused ScrollSpy to fail to identify the scrolled-to section as
active.
This commit fixes it by ensuring that we do not scroll more than necessary in
order to align the top of the element with the bottom of the toolbar.
Fixes#17452
* update to latest version of lunr search
* add trailing wildcard to search terms to increase matches
* fix unwanted error when escape was pressed
Closes#17417
Using `<a>` inside a `<button>` is not syntactically valid HTML and breaks on
some browsers (e.g. Firefox). Furthermore, clicking the button doesn't do
anything unless you click on the link (e.g. clicking on the padding around the
link does nothing), which is inconvenient and confusing.
Fixes#17448
* Remove the "info-banner" styling from the filters.
* Fix alignment of the search box on a narrow screen (closes#17395)
* Remove unnecessary whitespace before section headers
The current stable branch is determined based on the current version mapped to
the npm `latest` tag (by replacing the patch version number with 'x' - e.g.
`1.2.3` --> `1.2.x`).
PRs against the stable branch will be deployed to the preview server (as long as
the rest of the requirements are met). Commits on the stable branch itself will
be deployed to production.
Fixes#16908
This puts the behavior introduced in 573b8611bc behind the new flag
`alwaysCompileGeneratedCode` to not break users that might have relied
on this behavior.
This PR fixes an issue where `query(':enter')` will only collect elements up until it an element that is found that isn't apart of the `:enter` query.
Closes#17440
Chrome (v58+) often gets disconnected during unit tests (causing them to fail).
This has been happening locally (on Windows) and on Travis. The exact reasons
are not known, but it seems that some of the `AppComponent` tests are to blame.
Based on the discussion in https://github.com/jasmine/jasmine/issues/1327 (and
plenty of trial-and-error), using Jasmine's `done()` callback before each of
test (even calling it synchronously) fixes the issue.
Previously the RequestOptions/ResponseOptions classes had constructors
with a destructured argument hash (represented by the
{Request,Response}OptionsArgs type). This type consists entirely of
optional members.
This produces a .d.ts file which includes the constructor declaration:
constructor({param, otherParam}?: OptionsArgs);
However, this declaration doesn't type-check properly. TypeScript
determines the actual type of the hash parameter to be OptionsArgs | undefined,
which it then concludes does not have a `param` or `otherParam` member.
This is a bug in TypeScript ( https://github.com/microsoft/typescript/issues/10078 ).
As a workaround, destructuring is moved inside the method, where it does not produce
broken artifacts in the .d.ts.
Fixes#16663.
Motivation: `yarn outdated`, for exmaple, shows the homepage URL on the command line. If copy-pasting or clicking on the URL, it's nice to see the repo's page instead of a 404.
Closes#17245 and #17253
When the user selects a doc item in the side nav:
1) expand folder(s) leading to the selected doc item
2) on a wide display, keep other already expanded folders open
3) on narrow (mobile) display, collapse other expanded folders
Used to do (3) when wide. Issue #17245 asks for (2).
That logic was bypassed for selected node when we allowed headers to have content
because that unintentionally expanded the header’s folder when selected.
Because the selected node is no longer a header with content, removing this exclusion
also means that folders are expanded/collapsed with above logic even for API pages.
Rather than hard coding excludes into the dgeni config,
use the fact that we are already ignoring the boilerplate
and generated files via the .gitignore file.
Previously, the main content would always leave a 18% margin on the right to be
occupied by the ToC (even if there was no ToC).
This commit lets the main content expand to the right to occupy all the
available space when there is no ToC.
Fixes#17205Fixes#17270
Previously, when scrolling the ToC and reaching the top/bottom, further
mousewheel events would result in scrolling the window (and thus the main
content). This is standard browser behavior. In the case of the ToC though, the
`ScrollSpy` would detect scrolling in the main content and scroll the active ToC
to entry into view, thus resetting the scroll position of the ToC.
Reproduction:
1. Open `~/guide/template-syntax`.
2. Start scrolling through the long ToC.
3. Try to go to the bottom of the ToC.
4. Once you reach the bottom, the main content starts scrolling down.
5. The first section ("HTML in templates") becomes "active", so the ToC is
scrolled back up to make its corresponding entry visible.
6. Go back to step 2.
This commit improves the UX, by not allowing the main content to scroll when the
cursor is ovr the ToC and the user has scrolled all the way to the top/bottom of
it.
When navigating from a page with open SideNav to a page without closed SideNav,
the main content area animates from a non-zero left margin to zero left margin.
Additionally, the top-bar on the homepage is transparent, which allows the white
background behind the main content to be seen while the left margin is animated
to zero, making it appear as if something (e.g. the SideNav covers the top-bar).
This commit works around this issue, by not making the top-bar transparent
immediately when navigating to the homepage, but animating it from its blue
color to transparent with a delay.
Fixes#17248
An ellipsis was used to separate the most relevant search
results from the alphabetic list. The separator was confusing
because it was not clear what it represented.
This has been removed and the most relevant results are now
indicated by styling with a more bold font and a bit of whitespace
between them and the rest of the results.
To keep things consistent, if there are fewer than 5 results all the
results are now displayed as priorityPages.
Closes#17233
In the marketing pages we do not want to show heading anchors on hover.
Previously, this was achieved by using div rather than heading elements.
Now we can use semantically accurate headings while hiding the anchor.
Closes#17244Closes#17264
Previously, the top-bar's height wasn't taken into account when scrolling an
element into view. As a result, the element would be hidden behind the top-bar.
Taking the top-bar height into account was not necessary before #17155, because
the top-bar was not fixed (i.e. it scrolled away).
This commit fixes the scrolling behavior by accounting for the top-bar's height
when scrolling an element into view.
(This partially reverts #17102.)
Fixes#17219Fixes#17226
This wraps the $interval service when using upgrade to run the
$interval() call outside the Angular zone. However, the callback is
invoked within the Angular zone, so changes still propagate to
downgraded components.
- Fixed topnav on all mobile
- Fixed topnav on all docs pages
- Absolute topnav on all marketing pages
- Cleanup and code consolidation for all top-menu styles
- Add styling to topnav links on focus
When more than one node matches a url, the last
node defined in the navigation.json file won. This
meant that, for instance, items in both the
TopBarNarrow and the Footer views would not
indicate that they were active.
Now, each url is associated with a map of current
nodes keyed off their view.
Closes#17022
Previously, the progress bar would be placed right under the static top bar. Now
that the top bar i not tatic any more, it makes more sense to place the progress
bar at the top of the page.
Fixes#17103
* Remove whitespace before type specifiers
* Generate `new` and `call` member info for interfaces
* Ensure that there is no double space after class names
Previously, the `#top-of-page` element (used when scrolling to top) was placed
inside the content section (which at the time had zero top margin and padding).
Furthermore, there was a top offset applied when scrolling that took the static
top bar's height into account. Since now the top bar is not static any more and
the content section has a non-zero top padding, scrolling to top does not work
as expected.
This commit fixes this by:
- Moving the `#top-of-page` element to the top of the `aio-shell`.
- Stop accounting for the top bar's top.
Fixes#17006
Refactoring the compiler to use transformers moves the code generation
after type-checking which suppresses the errors TypeScript would
generate in the user code.
`TypeChecker` currently produces the same factory code that was
generated prior the switch to transfomers, getting back the same
diagnostics as before. The refactoring will allow the code to
diverge from the factory code and allow better diagnostic error
messages than was previously possible by type-checking the factories.
* fix(aio): make the search-pane larger
Fixes#17094
* feat(aio): give the search-box a type of "search"
This enables browsers to style it better (e.g. add an `x` button for clearing
the field, which allows users to quickly reset the search query and hide
results).
There seems to have been a bad rebase of #16228 on top of #16959, which affected
ToC styles from both PRs. This commit restores the horizontal line under `.h1`
elements and the vertical blue bar on the left-hand side of the ToC (with the
circle running along the bar to indicate the active section).
Fixes#17098
Now converts shorthand imports for every TypeScript target. Tsickle is able to expand index shorthand imports for every TypeScript target and module possibility.
Expanding shorthand imports for CommonJS modules is also helpful when testing in the browser. Module loaders like SystemJS are not able to understand directory imports (or index shorthand imports)
- Add styling for active TOC item
- Add sidenav styles
- Change header tags to divs from index marketing page to remove anchors
- Fix use of card mixin and create separate card-docs class
- Add marketing styling
- Topnav styling when on home landing page
- Remove hamburger menu on home page
- Add fully rounded border to top nav toolbar search input
- Add mobile styles
- Add title banner to other marketing pages
Use this file if we need to turn off the service worker in deployed sites
in an emergency where the worker has a bug that is blocking the application
from working.
Closes#16897
this means we'll be temporarily duplicating the helpers (onces included via scripts
and secondly imported via es imports) - once rxjs, core and material migrate over
to tslib, we can drop the scripts/global dupe.
The `TopBarNarrow` now only shows a single top level container, "About Angular",
and the original `TopBar` items will be children of this container.
The `TopBarNarrow` styling is changed to match the rest of the `SideNav`.
* refactor(aio): use explicit CSS class for TOC container
This makes the styling less fragile to changes in the HTML
* fix(aio): schedule TocComponent.activeIndex updates via AsapScheduler
We use the `asap` scheduler because updates to `activeItemIndex` are triggered by DOM changes,
which, in turn, are caused by the rendering that happened due to a ChangeDetection.
Without asap, we would be updating the model while still in a ChangeDetection handler,
which is disallowed by Angular.
* refactor(aio): do not instantiate floating ToC if not displayed
* feat(aio): display the h1 at the top of the floating TOC
Closes#16900
* refactor(aio): combine the TOC booleans flags into a "type" state
* refactor(aio): remove unnecessary `hostElement` property
* fix(aio): ensure that transition works on TOC
* fix(aio): use strict equality in ToC template
If there is a `TopBarNarrow` nav view then use this when the screen is narrow.
Otherwise just use the normal `TopBar`.
This commit also creates such a narrow topbar view where the "Docs" item is
in a different position
Closes#16940
These files are needed so that:
- user code can compile even without real codegen
- as tsc transformers cannot create but only change existing files
in the transformation pipeline.
This is required as e.g. `token` from `@Inject` is
accessed in string form via makeParamDecorator
but as a property in the `ReflectiveInjector`.
Closes#16889 as this is a more general fix.
Add source location as a note tag as `<note category="location">path/to/file.ts:start_line[,end_line]</note>`.
`[,end_line]` part is optional and specified only if the end line is different from the start line.
Fixes #16531
`flush()` can now be used from within fakeAsync tests to simulate moving
time forward until all macrotask events have been cleared from the
event queue.
Previously we hardcoded the current version into the navigation items.
Now only previous versions are included there. The current version is
computed from the currentVersion info.
Closes#16909
Based on optional title passed in from parent element such as CodeExample or CodeTabs.
Darkens uncovered copy button slightly as recommended for a11y.
PR #16808
- Use buttons for the TOC “Contents” label when embedded-and-expandable or TOC on the right to satisfy a11y.
- Add aria-pressed setting for the toggles in TOC and NavItem.
- Clicking the right panel TOC “Contents” button scrolls to top.
- When embedded use same rotating caret as sidebar
- When embedded and no secondaries, “Content” is just a label.
- Gray background for focused buttons rather than outline because can’t get carets to work with outline.
This commit was worked on by a number of people including
@filipesilva, @gkalpak and @wardbell. It contains changes that:
* remove unused files,
* fix the bootstrap approach to ensure that bootstrap is in the correct Zone
* fix unclosed code-example tags
* replace use of "we" with "you"
* remove broken dual router example
Related to angular/angular.io#3541
Lighthouse v1.6.5 treats localhost/1.2.7.0.0.1 as secure domains (i.e. as if they where HTTPS), so we need to stop handling the is-on-https audit specially.
In some cases (unclear when), traceviewer-js, used by Lighthouse under the hood,
assumes `atob`/`btoa` are defined in the global scope. This is true for browser
environments, but not on node.
As a result, some aggregations that required access to model-tracing failed to
produce results, dropping the overall PWA score.
This affected #16665 (e.g. commit 0de6eec7a).
This fixes a flicker when transitioning from server rendered page to client rendered page in lazy loaded routes by waiting for the lazy loaded route to finish loading, assuming initialNavigation on the route is set to 'enabled'.
Fixes#15716
If a usage of `{@link ...}` does not provide a title then
compute it based on the `title` and/or `name` properties
or set the link to invalid.
Closes#16811
Sidenav headers had been anchors w/o hrefs. These can’t take focus which makes you can’t navigate through them with keyboard. For a11y purposes, this PR turns them into buttons.
By reflex we began all component tests with an async `beforeEach` that called `compileComponents`.
In at least one case (`live-example.component.spec.ts`) that led to the `it` tests being async as well.
There is no need to call `.compileComponents` because CLI web pack + plugin inlines all templates and styles.
While `.compileComponents` was harmless, it added complexity and distraction which we should not inflict on future readers and testers.
Previously the logic for deciding when to display
the search result was spread between different
parts of the application and used non-intuitive logic
such as sending a blank results set to the searchResults.
This commit moves the management of displaying
the search results (and also setting focus of the
search input box) to the AppComponent. This makes
it easier to understand what happens and why; but
also allows the search UI components to be more
easily reused (such as embedding them in the 404
page).
(Coincidentally), this wasn't an issue before fdfeaaf1f, because
pre-verification was run after `test.sh`, during which `aio-builds-setup` was
built.
Now that `deploy-staging.sh` is being run before `test.sh`, we need to build
the `aio-builds-setup` scripts first.
Previously, `aio/aio-builds-setup/scripts/travis-preverify-pr.sh` was supposed
to exit with 1 if a PR did not meet the preconditions and 2 if an error occurred
during pre-verification.
It relied on the exit codes of the node script that did the actual work, but
didn't account for errors that would be thrown in the `sh` script itself (e.g.
if the node script was not available). This caused such errors to appear as
non-verified PRs, instead of real errors that should fail the build.
This commit swaps the exit codes, so that now a 2 means non-verified PR and 1
designates an error.
Hybrid apps (mix of Angular and AngularJS) might return AngularJS implementation
of Promises that do not play well with the change detection. Wrapping them in
native Promises fix this issue.
This could be the case when a Resolver returns a `$q` promise.
Use bracket notation to access $inject in downgradeInjectable to
support property renaming. Since the return type is any,
Closure compiler renames $inject.
Since abb36e3cb, we no longer rely on the cli to set up ServiceWorker, but do it
manually as part of `yarn build`. When using `ng serve`, registering the
ServiceWorker fails, because we haven't created `ngsw-manifest.json` nor copied
`worker-basic.min.js` into dist.
This commit works around this, by only registering the service worker in
production mode (which is what the cli does too).
Caveat:
It is not possible to enable ServiceWorker with `ng serve`/`yarn start` and
using the `--prod` flag will try to register it, but fail because the necessary
files (`ngsw-manifest.json` and `worker-basic.min.js`) will not be available.
(As a work-around, you can use `yarn build` and serve the files in `dist/` with
`yarn http-server -- dist -p 4200`.)
Previously, PR previews were deployed after successfully running all tests.
While this makes sense for staging/production deployments, previews should be
available as soon as possible (and regardless of the outcome of tests).
Fixes#16705
Previously, no previews would be deployed for PRs that didn't touch files inside
`aio/`. Now, previews will be deployed for PRs that touch non-spec files inside
either `aio/` or `packages/` (as long as other preconditions are met).
Partially addresses #16526.
* refactor(core): provide error message in stack for reflective DI
Fixes#16355
* fix(compiler): make AOT work with `noUnusedParameters`
Fixes#15532
* refactor: use view engine also for `NgModuleFactory`s
This is a prerequisite for being able to mock providers
in AOTed code later on.
Template expressions can now use a post-fix `!` operator
that asserts the target of the operator is not null. This is
similar to the TypeScript non-null assert operator. Expressions
generated in factories will be generated with the non-null assert
operator.
Closes: #10855
Only one h1 is allowed per document, and this is provided by the template.
So we cannot have any h1 tags (or `#` markdown shorthand) in any API docs.
Closes#16193
Only one h1 is allowed per document.
(Also took the opportunity to remove unnecessary blank lines from these
docs, and a bit of general tidying.)
Closes#16193
This fail behaviour is only turned on for `yarn docs`;
in `yarn docs-watch` you only receive a warning.
This is because you can get false errors when watching
since we don't parse all the docs in that case.
* fix(aio): allow code blocks to clear floated images
Previously the negative margin on the code headings were causing
floated images to overlay the start of a code block. Now all code block
successfully clear all floated elements.
* feat(aio): add a `.clear` class for clearing floating images
* fix(aio): tidy up image styles
The css rules for `img.right` and `img.left` allow authors easy
access to floating an image on the left or right, respectively.
The `.image-display` rule which was always found on a figure
has been simplified so that all figures have this styling. It is very
unlikely that a figure will be used outside the content area; and
at this time it seems like `figure` is as good an indicator that we
want this kind of styling as anything.
Now that images are all tagged with width and height values, we cannot
assume to modify these dimensions via CSS as it can cause the image to
lose its correct proportions. Until we find a better solition we must set
`height` to `auto` when the screen width is below 1300px to ensure that
these images maintain their proportions as they get shrunk to fit.
* docs(aio): general tidy up of image HTML in guides
Previously, the guides have a lot of inline image styling and unnecessary
use of the `image-display` css class.
Images over 700px are problematic for guide docs, so those have been given
specific widths and associated heights.
* docs(aio): use correct anchor for "back to the top" link
The `#toc` anchor does not work when the page is
wide enough that the TOC is floating to the side.
* build(aio): add `#top-of-page` to path variants for link checking
Since the `#top-of-page` is outside the rendered docs
the `checkAnchorLinks` processor doesn't find them
as valid targets for links.
Adding them as a `pathVariant` solves this problem
but will still catch links to docs that do not actually exist.
* fix(aio): ensure that headings clear floated images
* fix(aio): do not force live-example embedded image to 100% size
This made them look too big, generally. Leaving them with no size means
that they will look reasonable in large viewports and switch to 100% width
in narrow viewports.
* docs(animations): fix links to `Component` animations
* docs(core): fix links to `ReflectiveInjector` methods
The `resolve` and other methods were moved from the
`Injector` to the `ReflectiveInjector`.
* docs(core): fix links to `Renderer`
The local links were assuming that that methods were on the
current document (e.g. `RootRenderer`), but they are actually
on the `Renderer` class.
* docs(router): fix links to methods
* docs(forms): fix links to methods
* docs(core): fix links to methods
* docs(router): fix API page links and an internal link
closes#16608
Formerly, tried to navigate when user clicked an anchor with an image url (to view image in a new tab) resulting in 404.
Now ignores href URL with any extension and lets browser handle it.
This code only runs in ES5 mode in the test suite, so this is difficult to test.
However `updateFromTemplate` is being called with a spread operator, as
`...updateFromTemplate(...)`. The spread operator should fail on `null` values.
This change avoids the problem by always returning a (possibly empty) array.
PR Close#16547
This also clarifies via a test
that we only update projected views when the view is created or destroyed,
but not when it is attached/detached/moved.
Fixes#15578
PR Close#16592
Previously a projected view was only dirty checked when the
component in which it was inserted was dirty checked.
This fix changes the behavior so that a view is also dirty checked if
the declaring component is dirty checked.
Note: This does not change the order of change detection,
only the fact whether a projected view is dirty checked or not.
Fixes#14321
closes#16603
As before this PR, when wide (side-by-side), the sidenav open/close status only changes when nav to/from marketing page in which case it opens for guide/api and closes for marketing page.
Fundamentals and Techniques nav groups we also links to pages. This caused
counterintuitive behaviour when clicking on them.
This commit moves each link from the group item to a children item, called
Introduction.
Closes#16604
The CSS rule for positioning the automated header links was too general,
causing other links inside headings to be positioned incorrectly.
Closes#16573
Previously the `hasToc` was initialised to true, which caused a flash of
unwanted "Contents" [sic] even if the page was not going to need a ToC.
Closes#16597
TOC appears in right panel when wide and hides embedded TOC
Right TOC panel height adjusts dynamically during scroll
Refactored `TocService` and its tests for clarity.
@angular/http/testing used to publish a metadata structure which paralleled
the .d.ts structure. This causes ngc to write incorrect imports for this
bundle when compiling providers using MockBackend and other http testing
classes.
This change restructures the @angular/http/testing build a bit, modeling it
after @angular/platform-browser-animations, and produces a FESM structure
that has flat metadata.
Fixes#15521.
Currently, if a Response has an ArrayBuffer body and text() is called, Angular
attempts to convert the ArrayBuffer to a string. Doing this requires knowing
the encoding of the bytes in the buffer, which is context that we don't have.
Instead, we assume that the buffer is encoded in UTF-16, and attempt to process
it that way. Unfortunately the approach chosen (interpret buffer as Uint16Array and
create a Javascript string from each entry using String.fromCharCode) is incorrect
as it does not handle UTF-16 surrogate pairs. What Angular actually implements, then,
is UCS-2 decoding, which is equivalent to UTF-16 with characters restricted to the
base plane.
No standard way of decoding UTF-8 or UTF-16 exists in the browser today. APIs like
TextDecoder are only supported in a few browsers, and although hacks like using the
FileReader API with a Blob to force browsers to do content encoding detection and
decoding exist, they're slow and not compatible with the synchronous text() API.
Thus, this bug is fixed by introducing an encodingHint parameter to text(). The
default value of this parameter is 'legacy', indicating that the existing broken
behavior should be used - this prevents breaking existing apps. The only other
possible value of the hint is 'iso-8859' which interprets each byte of the buffer
with String.fromCharCode. UTF-8 and UTF-16 are not supported - it is up to the
consumer to get the ArrayBuffer and decode it themselves.
The parameter is a hint, as it's not always used (for example, if the conversion
to text doesn't involve an ArrayBuffer source). Additionally, this leaves the door
open for future implementations to perform more sophisticated encoding detection
and ignore the user-provided value if it can be proven to be incorrect.
Fixes#15932.
PR Close#16420
Currently `new Request({search: ...})` is not honored, and
`new Request({params: {'x': 'y'}) doesn't work either, as this object would have
toString() called. This change allows both of these cases to work, as proved by
the 2 new tests.
Fixes#15761
PR Close#16392
- Moved info bar section in pipe template to be the first section to match other templates
- Fixed label styling for type label
- Added label styling for status label
closes#16521
`LocationService` sends `GaService` a url stripped of fragment and query strings.
`GaService` already guards against re-send of the prior url so it will only report doc changes.
The latest rxjs release works with closure compiler out of the box.
We no longer need to compile our own.
Also put closure options into a file rather than using a shell script.
Previously, non-bracketed inputs (e.g. `xyz="foo"`) on downgraded components
were initialized using `attrs.$observe()` (which uses `$evalAsync()` under the
hood), while bracketed inputs (e.g. `[xyz]="'foo'"`) were initialized using
`$watch()`. If the downgraded component was created during a `$digest` (e.g. by
an `ng-if` watcher), the non-bracketed inputs were not initialized in time for
the initial call to `ngOnChanges()` and `ngOnInit()`.
This commit fixes it by using `$watch()` to initialize all inputs. `$observe()`
is still used for subsequent updates on non-bracketed inputs, because it is more
performant.
Fixes#16212
These utils support flexible, natural attribute interpretation as applied to code-example and code-pane. Then apply those utils to code-example and live-example
This contains a fix for the typescript module reader.
Previously, TS modules that were of the form:
```
a/b/index.ts
```
Would be given the name `index` and id of `a/b/index`.
This is not desirable, so the new version of dgeni-packages/typescript
removes this `index` from the id and name, which results in name of
`b` and id of `a/b`.
Update to in-memory-web-api should handle id=0.
Make sure this works by having a hero with id=0 in ToH.
Coincidentally delete lingering dead app/ folders
Todo: fix ToH images (which have to do anyway)
In the API docs there are occasions where we do not wish the code snippet
to have a copy button. This commit supports that by providing a new `hideCopy`
attribute.
- prevents unsubscribing from the zone on error
- prevents unsubscribing from directive `EventEmitter`s on error
- prevents detaching views in dev mode if there on error
- ensures that `ngOnInit` is only called 1x (also in prod mode)
Fixes#9531Fixes#2413Fixes#15925
Parse all `<img>` tags, during doc-gen, and insert the width and height of
the sourceed image, if neither are already specified.
Warnings are reported if the `<img>` tag has no `src` attribute or the image
cannot be loaded.
The work is done in the `addImageDimensions` post-processor, which must be
configured with a `basePath` so that it knows where to find the images.
Closes#15888
- Changed search result link hover state to white to be more legible
- Increased the max-height on search results container to remove the jitter
- Changed search results to have space-around vs space-between for more appropriate spacing
Reworked some of the code so asserts are no longer necessary.
Added additional and potentially redundant checks
Added checks where the null checker found real problems.
PR Close#16422
Angular uses the `ng-version` attribute to indicate which elements
were used to bootstrap an application. However, after 4.0 we also
added this attribute for all dynamically created components.
Fixes#15880
PR Close#16394
When a directive lives on the same element as a component
(e.g. `<my-comp myDir>`), the directive was not able to get hold
of the `ChangeDetectorRef` of the component on that element. However,
as directives are supposed to decorate components, this is incorrect.
This commit enables this use case.
Closes#12816
The autolinking is now done on the `renderedContent` which means it also
captures and autolinks headings that were generated outside of markdown.
PR Close#16336
Previously the CSS styling for material icons was too broad and affected
all instances of icons. This commit constrains the position of copy button
icons only to copy buttons.
This commit adds a new parameter to ngc named `missingTranslation` to set the MissingTranslationStrategy for AoT, it takes the value `error`, `warning` or `ignore`.
Fixes#15808
PR Close#15987
Because:
1. `docs` feels like a "top level" page, similar to `features`, `resources`, `events` etc.
2. This enables the ServiceWorker to pre-fetch/cache the document (similar to what happens with all
other direct children of `content/docs/`), without the need for special-casing it in
`ngsw-manifest.json`.
- Banner class code consolidation for API pages
- Set up temporary table of contents class and file
- API pages title styling
- Add color styling to doc-type listed on each API details page
- Classes and SCSS variables refactor
- Mobile optimization on headers, info-banner, and API pages
- API page table custom styling
- API Class Overview template code overview into table format
- Content container now has a max width and made the body background the same offwhite color so the cut-off is not visible
- Sidenav will always remain at the left of the page
- Added a max width to the api banner of filter search inputs
- Left aligned content container so it is flush with sidenav
- Changed API filter width to match size of filter results
- Add snackbar and pointer cursor for copy code button inside aio-code components
- Flex cenetered content in features page
- Removed duplicate global css class
- Add styles to links inside of sub-sections
- Remove focus outline on top nav bar links
We were filtering this document from the docs list but
not removing it from the module export lists.
We can actually filter it out much easier at the TypeScript
parsing point, which means we do not need the
`filterIgnoredDocs` processor any more.
Closes#16287
Previously, when using a different property/attribute name for an upgraded
component's binding (e.g. `bindings: {propName: '<attrName'}`), the property and
attribute names were swapped (e.g. using `attrName` as the property name and
`propName` as the attribute name). This resulted in unexpected behavior.
This commit fixes this using the correct names for properties and attributes.
This only affects `upgrade/dynamic`. `upgrade/static` works correctly already.
Fixes#8856
PR Close#16128
The side nav and menu buttons need to appear early on in the loading of the page.
Currently we are using icon fonts with ligatures to get icons for these areas.
This can result in a flash of unstyled font.
By replacing these with SVG icons, we get a better user experience.
By overriding the `MdIconRegistry` we can inline the SVG source, which
means that there will never by a delay in rendering the icons.
The new `CustomMdIconRegistry` expects a multi-provider containing an array
of `SvgIconInfo` objects. These objects hold the name and SVG source of the
icon. When `MdIconComponent` requests an SVG icon we will get it from the
pre-loading cache, if available, before delegating back to the original
`MdIconRegistry`.
Note that SVG versions of `md-icon` do not apply the `material-icons` CSS
class to the element, so the styling for the icons that we are preloading
has been changed to use `.mat-icon` instead.
Closes#16100
This is to tidy up the `author-packagse`, which currently duplicates a
lot of the configuration in the main packages. We need to
DRY this up so that we don't fall foul of a change in one being missed in
the other.
closes#16125
API search still updates query params as sending someone a pre-filtered API search link is handy.
While typing in the search box no longer updates the URL in the addr bar, you can still create a link like `~/?search=animations` and it will open the search dialog and profile the search box as it may be useful to email such a thing to someone.
Previously, the path returned by `LocationService.path()` preserved leading
slashes, which resulted in requests with consequtive slashes in the URL. Such
requests would fail (with a 404) on staging.
This commit fixes it, by removing leading slashes from the path. It also
refactors `LocationService` a bit, converting path to an observable,
`currentPath` (similar to `currentUrl`), and applies certain clean-ups (e.g.
stripping slashes, query, hash) in one place, which simplifies consumption.
Closes#16230
Changed description from h3 to h2 to match the other header
Created api page classes for consistent styling
Add styles for info-bar section
Wrapped pre tags for code not to go off of screen
This helps to ensure that the full docs have been
generated before we begin watching.
You can disable this by providing the `--watch-only`
flag. E.g. `yarn docs-watch -- --watch-only`.
Dgeni is now providing the `id` for all the documents to be viewed. So we
no longer need to add this to the DocumentContents object.
There are some notable changes in the refactoring:
`DocumentService`:
* The id of the document to render is now obtained from `LocationService.path()`.
* The `getFileNotFoundDoc` and `getErrorDoc` methods have been extracted from
the `fetchDocument` method.
`AppComponent`:
* the `pageId` is now computed in a separate `setPageId` method.
`AppComponen` spec file:
* The `TestHttp` has had the hard coded documents removed and replaced with
a function that will generate docs as needed.
* Scrolls to hash element or top of page when no hash.
* Scrolls down a bit (80px) to account for top menu overhang.
* No longer scrolls when the hash element is not found.
* Adds `<a id="top-of-page"></a>` which will benefit future efforts to
navigate there from within a page.
Index: Changed h3s to h2s given hierarchy
Index: Aligned text and image blocks to be centered
Index: Announcement bar button darkened for appropriate contrast
Search Results: Changed to list items in unordered list to accommodate accessibility and updated styles accordingly
closure compiler warns in generated .ngfactory.ts files:
```
WARNING - property createInternal already defined on superclass module$contents$..$core$src$linker$ng_module_factory_NgModuleInjector; use @override to override it
```
PR Close#16137
Fixed capitalization in sidenav menu items
Add min height property to sidenav-content for better viewing on short pages or high resolution screens
Add dividier between change log items as before to h2
Table adjustments to reduce off-screen items
Update home page banner text and icon change, and fix banner img and mobile alignment
Fix and add links in doc landing page and change card footer text to reflect correct name
Removed docs landing page to rebase with master
PR Close#16138
Angular change detection bug -> no page update on resize.
Reverting to `@HostListener('window:resize', ['$event.target.innerWidth'])` cures it.
Delete DeviceService which no longer serves a purpose.
Adjusted affected AppComponent and LiveExample tests.
PR Close#16143
There are external resources that link to the old URLs. In order to avoid
breaking them, the old URLs are redirected to the new ones.
Fixes#15795Closes#16133
PR Close#16162
Previously, due ot a limitation/bug in AoT compilation and `useValue`, the
`global` injected into `SwUpdateNotificationsService` was always undefined,
which prevented it from actually reloading the page after activating a
ServiceWorker update.
This commit fixes it by switching to `useFactory`, which works correctly with
AoT.
Aligned padding to fit beneath the top nav
Add scroll bar styling inside sidenav menu
Increased font size of h2 to be different from h3 for better legibility
Now if you specifically provide an empty `@title` tag
for a contents file, the doc-gen will not complain and
the browser will just display a reasonable default.
Add visually hidden class and apply to h2 in search results
Changed h2 group headers to h3s
Add roles to main and content
Fix API material icon placement
Image alt additions where needed
Add lang attribute to html tag
Add aria-label on search input
If a document provided a title jsdoc tag then its h1
element was being rendered incorrectly as a markdown
paragraph.
This change renders the title as a markdown h1 tag
directly.
Fixes#16099
Previously, the `AppComponent.pageId` was set via the current URL, rather than
the document being displayed. This is only really noticeable when the URL does not
match a valid doc and we are actually displaying a 404 page.
Now we compute the `pageId` from the URL of the document being viewed,
which is returned from the `DocumentService.currentDocument` observable instead.
I found that VS Code was taking an age to bring up the intellisense
for TypeScript source files in the `aio/src` folder.
I believe that this is because it was trying to parse all the files in
the `aio/content/examples` folder as well, which is not relevant to the
web app development.
This change restricts the root `aio/tsconfig.json` to only the entry points
for the app, the unit tests and e2e tests.
Documents can specify their title via the `title` or `name` jsdoc tags.
This change adds that, if neither are provided, the first `<h1>` element
is removed from the `renderedContent` and used for the title.
If there is still no title then it is set to the empty string and a warning
is logged.
contributor fix
contributor card styling updates
button styling and container size fix
remove button and add image border
selection filter for buttons
header only show when group selected and styles
initial flip card funcitonality and data change
selected buttons styling
complete flip func and card style
flip feature
contributor group changes
fixes
This only shows up in the language service. Calls to symbols
that are not resolve resulted in null instead of being resolved
causing the language service to see exceptions when the null
was not expected such as in the animations array.
Fixes#15969
- always have a value for `angular`, even if no angular is on the page
- use `const` instead of `function` to allow to export a variable `module`
without breaking tsickle / closure.
Language service was treating some alias TypeScript symbols as if
they where the canonical symbol. If the symbol in scope is an alias
of another symbol the symbol should be converted to the canonical
symbol.
This task is suitable for day to day docs authoring.
This task cuts corners, which makes it much faster than a full `yarn docs`
run but it does not produce completely valid output.
In general this isgood enough for authors to see their changes as they make them.
The task is triggered by a call to
```
yarn docs-watch
```
This sets up watchers on the `aio/contents` and `packages` folders.
Any changes to files below these folders new doc generation run to start.
The input to the generation is confined to a collection of files related
to the changed file. For example:
* a change to a file in `aio/content/marketing` will generate all the
marketing files.
* a change to a file in `aio/content/tutorial` or `aio/examples/toh-*`
will generate all the tutorial files (and their embedded examples).
* a change to a file in `aio/guide` or `aio/examples` (but not a `toh-`
example) will generate the appropriate guide and its embedded examples
* a change to a file in `packages` or `packages/examples` will generate
the appropriate API doc and its embedded examples.
Be aware that the mapping between docs and its examples are based on doc file
and example folder structure being equivalent. Sometimes a doc will reference
an example in a different folder, in which case the generated doc will be
inaccurate. Mostly this is not a big problem.
When content pages were short, the footer would take up a large part
of the display area and the side nav would look like it was shorter than
it really was.
This change moves the footer into the main content area so that the
nav always extends to the full length the browser.
Regular plunker is unusable on narrow screen
Refactors LiveExampleComponent and adds tests.
Refactor width detection to `DeviceService` because need to know width change in 2 places.
Keep “disable” option add in earlier spikes because simple and potentially useful in future.
Currently, running `yarn test-pwa-score` right after deploying to staging fails
with the error:
```
{ Error: Unable to load the page: timeout reached ... code: 'PAGE_LOAD_ERROR' }
```
As a temporary fix, this commit prevents the build from failing because of PWA
score errors (until we identify the cause and fix it).
Display area names in all caps
Exclude results with no title because they don’t show & can’t be clicked.
Should find these and give their docs a title.
- Ensure that the result passes OASIS XLIFF 2.0 schema validation
- Use <ph/> for self-closing placeholder tags
- Use <pc></pc> for other placeholder tags
- Check for the correct XLIFF file version
- Add ICU support
fixes#11735
This only shows up in the language service. Calls to symbols
that are not resolve resulted in null instead of being resolved
causing the language service to see exceptions when the null
was not expected such as in the animations array.
Fixes#15969
Previously, only a few characters of the SHA would appear on the preview link
comment posted on the PR. This was usually enough for GitHub to create a link to
the corresponding commit, but it was possible to have collisions with other
commits with the same first characters (which prevented GitHub from identifying
the correct commit and create a link.)
This commit fixes this issue by including the full SHA on the commentso GitHub
can identify the correct commit and create the link. GitHub will automatically
truncate the link text (by default to 7 chars unless more are necessary to
uniquely identify the commit).
Previously, when trying to upload the build artifacts for a PR/SHA that was
already successfully deployed (e.g. when re-running a Travis job), the preview
server would return a 403 and the build would fail.
Since we have other mechanisms to verify that the PR author is trusted and the
artifacts do indeed come from the specified PR and since the new artifacts
should be the same with the already deployed ones (same SHA), there is no reason
to fail the build. The preview server will reject the request with a special
HTTP status code (409 - Conflict), which the `deploy-preview` script will
recognize and exit with 0.
Don’t show the side nav in mobile (not side-by-side) view when arriving or navigating.
Only show it by request.
The side nav should continue to appear in wide mode (side-by-side) when navigating from a marketing page to a guide page.
The implementation adds three plugins to the remark processor:
* remove support for code blocks triggered by indented
text - only gfm triple backticks are supported; and also adds support for
dgeni inline tags.
* ignore content within `code-example` and `code-tabs` elements. This prevents
the content being accidentally treated as markdown
* ignore dgeni inline tags, e.g. `{@link ... }` to prevent the content of
the links from being accidentally treated as markdown
* Fixes that `tsc-wrapped` stores invalid path separators in the bundled metadata files. Previous errors could have been: `Cannot find module '.corecoordinationnique-selection-dispatcher'.` (See https://github.com/angular/material2/issues/3834)
* Fixes failing tests on Windows. Now all tooling tests are green on Windows.
Related to #15403
Sometimes, depending on the length of lines, anchor elements would be formatted
incorrectly by `html.prettyPrint` and the space right after the element was
removed.
This was apparently caused by a bug in `html.prettyPrint` in combination with
its default behavior of wrapping lines at a specific limit (70 chars). Since the
output is only meant to be used as JSON string data, wrapping the lines makes it
less readable by adding unnecessary `\n`.
This commit disables the line wrapping, which effectively avoids the bug that
was responsible for incorrectly formatting anchor elements and surrounding
space.
Related to #15681.
This version changes the expected syntax for emphasis.
The original Rho renderer uses `*` for strong an `_` for em.
But it is more standard in markdown to use `**` or `__` for bold
and `*` or `_` for em.
Allows to inherit ctor args, lifecycle hooks and statics from a class
in another compilation unit.
Will error if trying to inherit from a class in another compilation unit
that has an `@Component` / `@Directive` / `@Pipe` / `@NgModule`.
DebugServices is parsing false atributes values incorrectly.
Parse5 expects a string value for attributes, but currently boolean is being sent.
Closes#15494
The markdown renderer passes its output through an HTML pretty printer.
While this is good in most cases, it makes a mess of elements that expect
their content to be left untouched.
The pretty printer already ignores `pre` tags (and other built-ins) by
default. This fix allows us to specify other tags that should be left
alone.
Further it actually specifies this option for `code-example` and `code-pane`
tags, which expect to contain preformatted content.
Fixes#15528
What is the current behavior?
The language service access TypeScript's Symbol.members without checking for null or undefined.
What is the new behavior?
The access is guarded.
This processor will eventually replace the `{@example}` inline tags
because it provides a cleaner approach that also supports tabbed examples
straight out of the box.
The idea is that authors will simply add a `path` and (optionally) a `region`
attribute to `<code-example>` or `<code-pane>` elements in their docs.
This indicates to dgeni that the relevant example needs to be injected
into the content of this element.
For example, assume that there is an example file `toh-pt1/index.hml` with
a region called `title`, which looks like:
```
<h1>Tour of Heroes</h1>
```
Then the document author could get this to appear in the docs as a
standalone example:
```
<code-example path="toh-pt1" region="title"></code-example>
```
Or as part of a tabbed group:
```
<code-tabs>
<code-pane path="toh-pt1" region="title"></code-pane>
</code-tabs>
```
If no `path` attribute is provided then the element is ignored, which
enables authors to provide inline code instead:
```
<code-example>
Some <html> escaped code
</code-example>
```
Also all attributes other than `path` and `region` are ignored and passed
through to the final rendered output allowing the author to provide
styling hints:
```
<code-example path="toh-pt1" region="title" linenums"15" class="important">
</code-example>
```
Fixes#14417
Updated example to illustrate @ContentChildren default behavior (only query direct children), and how to query for nested elements/all descendants.
This has the side effect of allowing `@Input` and `@ContentChild`
on the same property if the query is static (see the bug description
for details).
Fixes#15417
Previously, all URLs were rewritten to `index.html` in order to support
deep-linking. This works when navigating to URLs that correspond to existing
resources. E.g. navigating to `/tutorial` returns `index.html` and then the
`DocViewer` takes over and requests `tutorial.json`.
Navigating to a non-existent URL (e.g. `/foo`), will return `index.html`, which
in turn requests (the non-existent) `foo.json` and throws an error when trying
to parse the returned `index.html` as JSON.
This commit fixes it by only rewriting URLs that do not request a file (i.e. do
not include a `.` in the last path segment).
Fixes#15398
To generate XLF files with ng-xi18n we could use the format parameter "xlf" or "xlif". The real name is "xliff" not "xlif", so this probably was a typo. This PR adds "xliff" as can be expected
This reverts commit d0bc83ca27.
Protractor-based prerendering is flakey on Travis and takes several minutes to
complete, slowing down the build. Prerendering has a lower impact now that we
use a ServiceWorker. We will revisit in the future (probably using a
`PlatformServer`-based approach).
PR Close#15346
`ngc` would look for flat module resources relative to the flat module index.
`ngc` now looks for flat module resources relative to the `.d.ts` file that declarates
the component.
Fixes#15221
PR Close#15367
Added an "origins" section to the flat module `.metadata.json` files
that records where the original symbols was declared. This allows
correctly calculating relative path references recorded in metadata.
This commit fixes a regression where `ngModel` no longer syncs
letter by letter on Android devices, and instead syncs at the
end of every word. This broke when we introduced buffering of
IME events so IMEs like Pinyin keyboards or Katakana keyboards
wouldn't display composition strings. Unfortunately, iOS devices
and Android devices have opposite event behavior. Whereas iOS
devices fire composition events for IME keyboards only, Android
fires composition events for Latin-language keyboards. For
this reason, languages like English don't work as expected on
Android if we always buffer. So to support both platforms,
composition string buffering will only be turned on by default
for non-Android devices.
However, we have also added a `COMPOSITION_BUFFER_MODE` token
to make this configurable by the application. In some cases, apps
might might still want to receive intermediate values. For example,
some inputs begin searching based on Latin letters before a
character selection is made.
As a provider, this is fairly flexible. If you want to turn
composition buffering off, simply provide the token at the top
level:
```ts
providers: [
{provide: COMPOSITION_BUFFER_MODE, useValue: false}
]
```
Or, if you want to change the mode based on locale or platform,
you can use a factory:
```ts
import {shouldUseBuffering} from 'my/lib';
....
providers: [
{provide: COMPOSITION_BUFFER_MODE, useFactory: shouldUseBuffering}
]
```
Closes#15079.
PR Close#15256
This shouldn't change anything. But it's interesting that we used to have this import
that seemed bogus, but there were no compilation or rutime errors.
Content pages like `tutorial/index.md` were being mapped to `tutorial.index.json`,
which meant that they could only be rendered if you browsed to `/tutorial/index`.
This didn't sit well so now these pages are mapped to `tutorial.json`, which
means that you browser to them via `/tutorial/` or just `/tutorial`.
Fixed#15335
The navigation.json is now passed through the dgeni pipeline.
The source file has been moved to `aio/content/navigation.json`
but the generated file will now appear where the original source file
was found, `aio/src/content/navigation.json`.
Everything inside `aio/src/content` is now generated and ignored by git.
The `processNavigationMap` processor in this commit adds the current version
information to the navigation.json file and verifies the relative urls in
the file map to real documents.
The navigationService exposes the versionInfo as an observable, which the
AppComponent renders at the top of the sidenav.
The navigation.json is now passed through the dgeni pipeline.
The source file has been moved to `aio/content/navigation.json`
but the generated file will now appear where the original source file
was found, `aio/src/content/navigation.json`.
Everything inside `aio/src/content` is now generated and ignored by git.
The `processNavigationMap` processor in this commit adds the current version
information to the navigation.json file and verifies the relative urls in
the file map to real documents.
The navigationService exposes the versionInfo as an observable, which the
AppComponent renders at the top of the sidenav.
The original Rho is too strict when it comes to markdown headings.
It requires that there be a blank line separating the heading and the
next paragraph. The forked version here fixes that; but the Rho project
will not merge it as it goes against there basic rules.
Unlike in the browser, on the server there is no concept of a document origin.
Thus, it is illegal to make requests for relative URLs against Http on platform-server.
Currently this fails with a vague error:
Error: Uncaught (in promise): Error at resolvePromise
This change adds explicit validation and a friendlier error message:
Error: URLs requested via Http on the server must be absolute. URL: /testing
Another option considered was to track the concept of an origin for the platform
and automatically prepend it to relative URLs. This would cause automatic "local
RPCs" to be made, though, which would be an unexpected and undesirable default
behavior.
Fixes#15349
PR Close#15357
This change reduces the amount of generated code by only adding `log`
calls for elements and text nodes.
We need the `log` calls to allow users to jump to the right place
in the template via source maps. However, we only need it for element
and text nodes, but not for directives, queries, … as for them we
first locate the corresponding element or text node.
Related to #15239
PR Close#15350
This is needed to support the corner cases:
- usage of a `ComponentFactory` that was created on the fly via `Compiler`
- overwriting of the `NgModuleRef` that is associated to a
`ComponentFactory` by the `ComponentFactoryResolver` from
which it was read.
Fixes#15241
We extracted ids from i18n attributes but forgot to use them when merging the translations, resulting in an error about missing translations even when they were correctly defined.
Fixes#15234
PR Close#15302
If a directive has not bindings nor has a `ngDoCheck` / `ngOnInit`
lifecycle hook, don’t generate a `check` call.
This does not have an impact on the behavior, but produces
less code.
PR Close#15322
This reverts commit 8b5c6b2732.
This feature is not compatible with the `Injector.get` which now only
takes `Type` or `InjectableToken`. `Symbol` is not a valid type.
Closes#15183
PR Close#15319
The Router use the type `Params` for all of:
- position parameters,
- matrix parameters,
- query parameters.
`Params` is defined as follow `type Params = {[key: string]: any}`
Because parameters can either have single or multiple values, the type should
actually be `type Params = {[key: string]: string | string[]}`.
The client code often assumes that parameters have single values, as in the
following exemple:
```
class MyComponent {
sessionId: Observable<string>;
constructor(private route: ActivatedRoute) {}
ngOnInit() {
this.sessionId = this.route
.queryParams
.map(params => params['session_id'] || 'None');
}
}
```
The problem here is that `params['session_id']` could be `string` or `string[]`
but the error is not caught at build time because of the `any` type.
Fixing the type as describe above would break the build because `sessionId`
would becomes an `Observable<string | string[]>`.
However the client code knows if it expects a single or multiple values. By
using the new `ParamMap` interface the user code can decide when it needs a
single value (calling `ParamMap.get(): string`) or multiple values (calling
`ParamMap.getAll(): string[]`).
The above exemple should be rewritten as:
```
class MyComponent {
sessionId: Observable<string>;
constructor(private route: ActivatedRoute) {}
ngOnInit() {
this.sessionId = this.route
.queryParamMap
.map(paramMap => paramMap.get('session_id') || 'None');
}
}
```
Added APIs:
- `interface ParamMap`,
- `ActivatedRoute.paramMap: ParamMap`,
- `ActivatedRoute.queryParamMap: ParamMap`,
- `ActivatedRouteSnapshot.paramMap: ParamMap`,
- `ActivatedRouteSnapshot.queryParamMap: ParamMap`,
- `UrlSegment.parameterMap: ParamMap`
Previously, a pipe that returned a `WrappedValue` would force the change
of the next bound property, independent of the binding in which the pipe
was used.
Now only the binding in which the `WrappedValue` is used will be assumed
as changed.
Fixes#15116
PR Close#15257
This is so that server side rendering does not throw an exception when it encounters animations on the server side and does not need the user to explicitly setup NoopAnimationsModule in their app server module.
Fixes#15098, #14784.
PR Close#15131
Closure compiler is very sensitive to top level function calls.
This commit makes the function calls `createComponentFactory`
and `createRendererTypeV2` logic-less.
Fixes#15181
PR Close#15214
DEPRECATION:
- the arguments `inputs` / `outputs` / `ngContentSelectors` of `downgradeComponent`
are no longer used as Angular calculates these automatically now.
- Compiler.getNgContentSelectors is deprecated. Use
ComponentFactory.ngContentSelectors instead.
E.g. for a component like this:
```
@Component({
template: ‘<ng-content select=“child”></ng-content>’
})
class MyComp {
@Input(‘aInputName’)
aInputProp: string;
@Output(‘aEventName’)
aOuputProp: EventEmitter<any>;
}
```
the `ComponentFactory` will now contain the following:
- `inputs = {aInputProp: ‘aInputName’}`
- `outputs = {aOutputProp: ‘aOutputName’}`
- `ngContentSelectors = [‘child’]`
Fixes:
- In G3, filePaths don’t start with a `/` and therefore became relative.
- Always using the `ng://` prefix groups angular resources in the same
way for AOT and JIT.
ErrorHandler can not throw errors because it will unsubscribe itself from
the error stream.
Zones captures errors and feed it into NgZone, which than has a Rx Observable
to feed it into ErrorHandler. If the ErroHandler throws, then Rx will teardown
the observable which in essence causes the ErrorHandler to be removed from the
error handling. This implies that the ErrorHandler can never throw errors.
Closes#14949Closes#15182Closes#14316
Inlcuded fixes:
- include preamble in generated source map
- always add a mapping for line/col 0 so that the
generated sourcemap is not sparse
- use a uniue sourceUrl for inline templates even
in the AOT case
Update tsickle to version 0.21.6 which fixes a bug where input source maps which specified filenames differently than the names supplied to tsc didn't get composed with tsc's source maps. Also adds a test that the bug was fixed.
Previous to 2.x there were some source maps distrubted, but they didn't go
all the way back to the TypeScript sources and they weren't available for
all JavaScript distrubted to NPM.
With this change source maps will be available for FESM distributions as
well as UMD and will go all the way back to TypeScript sources.
Fixes#15184
Observable subscriptions from previous validation runs should be canceled
before a new subscription is created for the next validation run.
Currently the subscription that sets the errors is canceled properly,
but the source observable created by the validator is not. While this
does not affect validation status or error setting, the source
observables will incorrectly continue through the pipeline until they
complete. This change ensures that the whole stream is canceled.
AsyncValidatorFn previously had an "any" return type, but now it more
explicitly requires a Promise or Observable return type. We don't
anticipate this causing problems given that any other return type
would have caused a runtime error already.
Previously, style values were parsed with a regex that split on /:+/.
This causes errors for CSS such as
div {
background-url: url(http://server.com/img.png);
}
since the regex would split the background-url line into 3 values instead of 2.
Now, the : character is detected with indexOf, avoiding this error.
A test was added to verify the behavior is correct.
Implemented style guide elements to top header bar, side hamburger nav menu, content and search. Consolidated SCSS files to styles folder. Fixed PWA test.
The input may still have focus when the user hits ESC,
causing the search to be hidden.
If the user then clicks on the input again, they would expect
it to reopen the results.
DEPRECATION:
- the arguments `inputs` / `outputs` / `ngContentSelectors` of `downgradeComponent`
are no longer used as Angular calculates these automatically now.
- Compiler.getNgContentSelectors is deprecated. Use
ComponentFactory.ngContentSelectors instead.
E.g. for a component like this:
```
@Component({
template: ‘<ng-content select=“child”></ng-content>’
})
class MyComp {
@Input(‘aInputName’)
aInputProp: string;
@Output(‘aEventName’)
aOuputProp: EventEmitter<any>;
}
```
the `ComponentFactory` will now contain the following:
- `inputs = {aInputProp: ‘aInputName’}`
- `outputs = {aOutputProp: ‘aOutputName’}`
- `ngContentSelectors = [‘child’]`
In order for tsickle's new support for input source maps to work, the tsickleCompilerHost must be used for the initial load of source files, since that's when the inline source maps are read and stripped.
* feat(common): support `as` syntax in template/* bindings
Closes#15020
Showing the new and the equivalent old syntax.
- `*ngIf="exp as var1”`
=> `*ngIf="exp; let var1 = ngIf”`
- `*ngFor="var item of itemsStream |async as items”`
=> `*ngFor="var item of itemsStream |async; let items = ngForOf”`
* feat(common): convert ngIf to use `*ngIf="exp as local“` syntax
* feat(common): convert ngForOf to use `*ngFor=“let i of exp as local“` syntax
* feat(common): expose NgForOfContext and NgIfContext
In v2.x, users had to annotate classes that they intended to use as tokens with `@Injectable`. This is no longer required in v4.x for tokens,
and we now require the constructor parameters of classes annotated
with `@Injectable` to be statically analyzable by ngc.
This commit reduces the error into a warning
if the constructor parameters do not meet this condition.
DEPRECATION:
- Classes annotated with `@Injectable` but whose constructor’s parameter types
are not statically analyzable by ngc will produce a warning.
Closes#15003
Throwing on query changes would be a breaking change compared to v2.
Also discovers a bug with querying manually projected content, see #15117.
Related to #14748Closes#14925
Currently, it says:
Unexpected value 'FuzzyTimePipe in
javascript/angular2/example/search/fuzzy_time.ts' declared by the module
'SearchModule in javascript/angular2/example/search/search_module.ts'
The new error message also suggests: 'Please add a @Pipe/@Directive/@Component annotation.'
fixes#12869fixes#12889fixes#13885fixes#13870
Before this change there was a single injector tree.
Now we have 2 injector trees, one for the modules and one for the components.
This fixes lazy loading modules.
See the design docs for details:
https://docs.google.com/document/d/1OEUIwc-s69l1o97K0wBd_-Lth5BBxir1KuCRWklTlI4
BREAKING CHANGES
`ComponentFactory.create()` takes an extra optional `NgModuleRef` parameter.
No change should be required in user code as the correct module will be used
when none is provided
DEPRECATIONS
The following methods were used internally and are no more required:
- `RouterOutlet.locationFactoryResolver`
- `RouterOutlet.locationInjector`
This API was introduced only in a beta release, and is being removed because we found it to be incorrect prior to launch. For more information about why this is being removed, see https://github.com/angular/angular/pull/15050.
BREAKING CHANGE:
Perviously, any provider that had an ngOnDestroy lifecycle hook would be created eagerly.
Now, only classes that are annotated with @Component, @Directive, @Pipe, @NgModule are eager. Providers only become eager if they are either directly or transitively injected into one of the above.
This also makes all `useValue` providers eager, which
should have no observable impact other than code size.
EXPECTED IMPACT:
Making providers eager was an incorrect behavior and never documented.
Also, providers that are used by a directive / pipe / ngModule stay eager.
So the impact should be rather small.
Fixes#14552
The main use case for the generated source maps is to give
errors a meaningful context in terms of the original source
that the user wrote.
Related changes that are included in this commit:
* renamed virtual folders used for jit:
* ng://<module type>/module.ngfactory.js
* ng://<module type>/<comp type>.ngfactory.js
* ng://<module type>/<comp type>.html (for inline templates)
* error logging:
* all errors that happen in templates are logged
from the place of the nearest element.
* instead of logging error messages and stacks separately,
we log the actual error. This is needed so that browsers apply
source maps to the stack correctly.
* error type and error is logged as one log entry.
Note that long-stack-trace zone has a bug that
disables source maps for stack traces,
see https://github.com/angular/zone.js/issues/661.
BREAKING CHANGE:
- DebugNode.source no more returns the source location of a node.
Closes 14013
The migrator was updated to automatically fix these links.
See fca5fb0280
and 3927b7a038
The result of this is that, going forward, we should ask
authors to include the path from the base href to the thing
being linked. E.g. guide/architecture#intro
* Ensure that all indexed documents are displayed in the search results.
(Previously the guide documents were not appearing because we only showed
results that had a `name` property, rather than a `name` or `title`.)
* Group the results by their containing folder (e.g. api, guide, tutorial, etc).
* Hide the results when the user hits the ESC key.
* Hide the results when the user clicks on a search result
Closes#14852
Adds tests and fixes corners cases for both `search()` and `setSearc()`
for things like empty queries and param keys that need encoding.
This commit refactors the `LocationService` to rely upon the `PlatformLocation`
rather than using `window.history` directly. This makes testing easier but also
makes the code simpler since `PlatformLocation` deals with platforms that
do not support history for us.
This can be used to e.g. add the NoopAnimationsModule by default:
```
TestBed.initTestEnvironment([
BrowserDynamicTestingModule,
NoopAnimationsModule
], platformBrowserDynamicTesting());
```
Gaining access to another PR's JWT, would allow faking that PR's author wrt to
GitHub team membership verification for as long as the JWT is valid (currently
90 mins).
DEPRECATION:
Use `RouterModule.forRoot(routes, {initialNavigation: 'enabled'})` instead of
`RouterModule.forRoot(routes, {initialNavigtaion: true})`.
Before doing this, move the initialization logic affecting the router
from the bootstrapped component to the boostrapped module.
Similarly, use `RouterModule.forRoot(routes, {initialNavigation: 'disabled'})`
instead of `RouterModule.forRoot(routes, {initialNavigation: false})`.
Deprecated options: 'legacy_enabled', `true` (same as 'legacy_enabled'),
'legacy_disabled', `false` (same as 'legacy_disabled').
The "Router Initial Navigation" design document covers this change.
Read more here:
https://docs.google.com/document/d/1Hlw1fPaVs-PCj5KPeJRKhrQGAvFOxdvTlwAcnZosu5A/edit?usp=sharing
Previously, the relative order of the AngularJS compiling/linking operations was
not similar to AngularJS's, resulting in inconsistent behavior for upgraded
components (which made upgrading to Angular less straight forward).
This commit fixes it, by following the compiling/linking process of AngularJS
more closely.
Main differences:
- The components view is already populated when the controller is instantiated
(and subsequent hooks are called).
- The correct DOM content is available when running the `$onChanges`, `$onInit`,
`$doCheck` hooks. Previously, the "content children" were still present, not
the "view children".
- The same for pre-linking.
- The template is compiled in the correct DOM context (e.g. has access to
ancestors). Previously, it was compiled in isolation, inside a dummy element.
For reference, here is the order of operations:
**Before**
1. Compile template
2. Instantiate controller
3. Hook: $onChanges
4. Hook: $onInit
5. Hook: $doCheck
6. Pre-linking
7. Collect content children
8. Insert compiled template
9. Linking
10. Post-linking
11. Hook: $postLink
**After**
1. Collect content children
2. Insert template
3. Compile template
4. Instantiate controller
5. Hook: $onChanges
6. Hook: $onInit
7. Hook: $doCheck
8. Pre-linking
9. Linking
10. Post-linking
11. Hook: $postLink
Fixes#13912
For some reason the tree-shaker is not picking up these interfaces
(perhaps TS is not passing it through) when they are in the same file
as their related services. This results in a distracting warning message.
There is a weirdness in the Angular Location service.
If the `baseHref` is only a single slash (`'/'`) then it
changes it to be an empty string (`''`). The effect of this
is that `Location.normaliseUrl(url)` does not strip off the
leading slash from url paths.
The problem is that the leading slash only appears on the
initial Location path, and not on urls that arrive from subscribing
to the Location service.
This commit is a workaround this problem.
Generate the docs with `yarn docs`.
Test the doc generation code with `yarn docs-test`
The docs are automatically built as part of the `yarn build` task,
so there is no need to rebuild them in the test_aio.sh file
Secondary entry points (testing, static, etc) are rolled up into a
single ESM/ES2015 file, then downleveled to ESM/ES2015. This downleveling
was not working and was producing ESM/ES2015. Also, the @angular/core
package's .babelrc file was missing reference to Rx Observable which
broke the UMD bundle.
Fixes#14730
After the introduction of the view engine, we can drop a lot of code that is not used any more.
This should reduce the size of the app bundles because a lot of this code was not being properly tree-shaken by today's tools even though it was dead code.
E.g. for no view encapsulation, the delegate will always be the same.
Nevertheless, we still need to create a new `AnimationRenderer` per
component.
Attention: This change will conflict with a local mod in G3.
- Don’t use the animation renderer if a component
used style encapsulation but no animations.
- The `AnimationRenderer` should be cached in the same
lifecycle as its delegate.
- Trigger names need to be namespaced per component type.
This change allows the example writer to add doc-region annotations to
files that do not allow comments. This is done by creating a clone of the
file and adding `.annotated` to the file name. This new file can contain
inline `// ...` comments that can be used to annotate the doc regions.
Example:
**package.json**
```
{
"name": "angular.io",
"version": "0.0.0",
"main": "index.js",
"repository": "git@github.com:angular/angular.git",
"author": "Angular",
"license": "MIT",
"private": true,
}
````
**package.json.annotated**
```
{
"name": "angular.io",
// #docregion version
"version": "0.0.0",
// #enddocregion
"main": "index.js",
"repository": "git@github.com:angular/angular.git",
"author": "Angular",
"license": "MIT",
"private": true,
}
````
This region can then be referenced in examples just like any other doc region:
```
{@example 'package.json' region="version"}
```
When the `enableLegacyTemplate` is set to `false`, `<template>` tags and the
`template` attribute are no more used to define angular templates but are
treated as regular tag and attribute.
The default value is `true`.
In order to define a template, you have to use the `<ng-template>` tag.
This option applies to your application and all the libraries it uses. That is
you should make sure none of them rely on the legacy way to defined templates
when this option is turned off (`false`).
The rationale of this change is to improve the inter-operability with web
components that might make use of the `<template>` tag.
DEPRECATION
The template tags and template attribute are deprecated:
<template ngFor [ngFor]=items let-item><li>...</li></template>
<li template="ngFor: let item of items">...</li>
should be rewritten as:
<ng-template ngFor [ngFor]=items let-item><li>...</li></ng-template>
Note that they still be supported in 4.x with a deprecartion warning in
development mode.
MIGRATION
- `template` tags (or elements with a `template` attribute) should be rewritten
as a `ng-template` tag,
- `ng-content` selectors should be updated to referto a `ng-template` where they
use to refer to a template: `<ng-content selector="template[attr]">` should be
rewritten as `<ng-content selector="ng-template[attr]">`
- if you consume a component relying on your templates being actual `template`
elements (that is they include a `<ng-content selector="template[attr]">`). You
should still migrate to `ng-template` and make use of `ngProjectAs` to override
the way `ng-content` sees the template:
`<ng-template projectAs="template[attr]">`
- while `template` elements are deprecated in 4.x they continue to work.
BREAKING CHANGE: Because all lifecycle hooks are now interfaces
the code that uses 'extends' keyword will no longer compile.
To migrate the code follow the example below:
Before:
```
@Component()
class SomeComponent extends OnInit {}
```
After:
```
@Component()
class SomeComponent implements OnInit {}
```
we don't expect anyone to be affected by this change.
Closes#10083
Use `RendererV2` instead of `Renderer` now. `Renderer` can still be injected
and delegates to `RendererV2`.
Use `RendererFactoryV2` instead of `RootRenderer`. `RootRenderer` cannot be used
anymore.
BREAKING CHANGE:
- `RootRenderer` cannot be used any more, use `RendererFactoryV2` instead.
Note: `Renderer` can still be injected/used, but is deprecated.
Change required in previous commit ab96257bc that upgrades the CLI version.
env.sh: protractor v.5 requires a later version of chromium. Upping to 433059/Chrome 56.
Currently styles are rendered to the root component element, which ensures they're cleaned up automatically
when the client application is bootstrapped. This is less than ideal as progressive rendering can cause HTML
to be rendered before the CSS is loaded, causing flicker.
This change returns to rendering <style> elements in the <head>, and introduces a mechanism for removing
them on client bootstrap. This relies on associating the server and client bootstrap. Another way to think
of this is that the client, when bootstrapping an app, needs to know whether to expect a server rendered
application exists on the page, and to identify the <style> elements that are part of that app in order
to remove them.
This is accomplished by providing a string TRANSITION_ID on both server and client. For most applications,
this will be achieved by writing a client app module that imports BrowserModule.withServerTransition({appId: <id>}).
The server app module will import this client app module and therefore inherit the provider for
TRANSITION_ID. renderModule[Factory] on the server will validate that a TRANSITION_ID has been provided.
TypeScript compiler will now build to ES2015 code and modules. Babili is used to minify ES2015
code, providing an initial optimization that we couldn't previously get just from Uglify. Uses
Babel to convert ES2015 to UMD/ES5 code, and Uglify to minimize the output.
Some versions of TypeScript are super slow to compile functions that
contain a lot of `if` conditions in them. Splitting the handle event
expressions per element is similar to what we did in the old codegen.
Allow to style components that don’t use shadow dom inside of components that do.
This reverts 53cf2ec573
and adds a test for this case.
Related to #7887
Note that this does not yet include enabling the view engine
by default.
Included refactoring:
- view engine: split namespace of elements / attributes already
when creating the `NodeDef`
- view engine: when injecting the old `Renderer`, use an implementation
that is based on `RendererV2`
- view engine: store view queries in the component view, not
on the host element
Included refactoring:
- splits the `RendererV2` into a `RendererFactoryV2` and a `RendererV2`
- makes the `DebugRendererV2` a private class in `@angular/core`
- remove `setBindingDebugInfo` from `RendererV2`, but rename `RendererV2.setText` to
`RendererV2.setValue` and allow it on comments and text nodes.
Part of #14013
This change installs HttpModule with ServerModule, and overrides bindings to
service Http requests made from the server with the 'xhr2' NPM package.
Outgoing requests are wrapped in a Zone macro-task, so they will be tracked
within the Angular zone and cause the isStable API to show 'false' until they
return. This is essential for Universal support of server-side HTTP.
This ensures when the tree is serialized to the client and the app is later bootstrapped,
the <style> tags created during server-side rendering are destroyed.
Aspects: di, query, content projection
Included refactoring:
- use a number as query id
- use a bloom filter for aggregating matched queries of nested elements
- separate static vs dynamic queries
Part of #14013
- PlatformState provides an interface to serialize the current Platform State as a string or Document.
- renderModule and renderModuleFactory are convenience methods to wait for Angular Application to stabilize and then render the state to a string.
- refactor code to remove defaultDoc from DomAdapter and inject DOCUMENT where it's needed.
Included refactoring:
- make ViewData.parentIndex point to component provider index
- split NodeType.Provider into Provider / Directive / Pipe
- make purePipe take the real pipe as argument to detect changes
- order change detection:
1) directive props
2) renderer props
Part of #14013
PR Close#14412
In #14388 the following syntax is used in the source:
```
import * as view_utils from './linker/view_utils';
import * as viewEngine from './view/index';
…
export {view_utils as ɵview_utils};
export {viewEngine as ɵviewEngine};
```
The usage of `export {... as ...}` was not being recognised by dgeni.
It is now being recognised and a temporary dummy output file is being
rendered. Later we will either ignore this doctype altogether or find
a better way of rendering it.
This gives server-side apps a current URL including hash, but doesn't implement a state stack,
so back-and-forward navigation isn't possible.
PR Close#14405
the aio/ has a separate build and ci setup that doesn't affect main repo, so it doesn't make
sense for the build-and-ci group to approve changes to that separate setup.
Floating versions can break our CI. This happened with concurrently release last evening.
Ideally we should just check in the yarn.lock file but are blocked on https://github.com/yarnpkg/yarn/issues/2256
PR Close#14378
BREAKING CHANGE: Classes that derive from `AsyncPipe` and override
`transform()` might not compile correctly. Use of `async` pipe in
templates is unaffected.
Mitigation: Update derived classes of `AsyncPipe` that override
`transform()` to include the type parameter overloads.
Related to #12398
PR Close#14367
BREAKING CHANGE:
- `KeyValueDifferFactory` and `IterableDifferFactory` no longer have `ChangeDetectorRef` as
a parameter. It was not used and has been there for historical reasons. If you call
`DifferFactory.create(...)` remove the `ChangeDetectorRef` argument.
All the docs related files (docs-app, doc-gen, content, etc)
are now to be found inside the `/aio` folder.
The related gulp tasks have been moved from the top level
gulp file to a new one inside the `/aio` folder.
The structure of the `/aio` folder now looks like:
```
/aio/
build/ # gulp tasks
content/ #MARKDOWN FILES for devguides, cheatsheet, etc
devguides/
cheatsheets/
transforms/ #dgeni packages, templates, etc
src/
app/
assets/
content/ #HTML + JSON build artifacts produced by dgeni from /aio/content.
#This dir is .gitignored-ed
e2e/ #protractor tests for the doc viewer app
node_modules/ #dependencies for both the doc viewer builds and the dgeni stuff
#This dir is .gitignored-ed
gulpfile.js #Tasks for generating docs and building & deploying the doc viewer
```
Closes#14361
Since we have a shallow clone of the repository, it might be the case that the
latest tag (which we need for publishing the build artifacts) might not be in
the current history.
This commit incrementally deepens the clone until it finds a tag (or reaches a
max depth).
PR Close#14231
Previously, the `integration/` tests were failing, because `concurrently "foo"`
does not inherit the `PATH` env var ([more info][1]).
This commit fixes it, by setting the `PATH` env var explicitly:
`concurrently "PATH=$PATH foo"`.
This commit also includes some minor refactoring of the `integration/` tests scripts:
- Move build-related operations to `ci-lite/build.sh` (for consistency).
- Use `yarn run ...` instead of `npm run ...` inside package.json scripts.
- Use global `yarn` (since we are already using it for `aio/`).
- Fix some `travis_fold` statements.
[1]: https://github.com/kimmobrunfeldt/concurrently/issues/61#issuecomment-252081610
- Make sure `NodeDef`s don’t fall into dictionary mode.
- Use strategy pattern to add debug information / checks, instead of constantly checking for `isDevMode`.
- introduce a very light weight `RendererV2` interface to not have duplicate
code paths for direct and non direct rendering
The strategy pattern is implemented via the new `Services` object.
Part of #14013
PR Close#14345
Note that the duplication in tsconfig.json files will be fixed in a followup CL now that we have tsconfig inheritance
BREAKING CHANGE: Angular 4 will support only TypeScript 2.1, so we no longer provide backwards compatibility to TS 1.8.
Subclassing errors is problematic since Error returns a
new instance. All of the patching which we do than prevent
proper application of source maps.
PR Close#14160
Tsickle transforms typescript code, which can change the location of code.
This can cause issues such as runtime stack traces reporting that errors
were raised on the incorrect line in the orginal source. This change replaces
the DecoratorDownlevelCompilerHost and the TsickleCompilerHost with tsickle's
TsickleCompilerHost, which automatically composes tsickle's source maps with
typescript's source maps, so that line numbers are correctly reported at
runtime.
PR Close#14150
Previously, the `previousValue` and `currentValue` arguments passed to the
`SimpleChange` constructor were swapped for interpolation bindings.
This commit also refactors the code, so that interpolation bindings and property
bindings share the same implementation, and fixes some broken tests (that hide
failures by allowing the `$exceptionHandler` to swallow thrown exceptions).
PR Close#14301
I messed up and accidentaly led the team to believe that the feature freeze was on Feb 15.
Because of this most work was planned to be done by Feb 15 and there is no way to finish it by the original
date of Feb 8. To remedy this situation we agreed to add one more beta to the release schedule.
This commit updates the doc-gen to account
for the changes to the codebase for decorators.
There are actually three kinds of calls that create decorators:
* makeDecorator
* makePropDecorator
* makeParamDecorator
Also, the actual documentation for each
decorator is split between two exported symbols:
* `interface [DecoratorName]` contains the metadata fields
* interface [DecoratorName]Decorator` contains a
"call member" which holds the general description of the decorator.
This processor now identifies all three decorator types, and pulls the
description of the callMember onto the main decorator doc description.
(There are some outstanding interfaces in the angular/angular project that
need to be re-exported from `/angular/modules/@angular/core/src/metadata.ts`
to ensure that the doc-gen is able to access them.)
Closes https://github.com/angular/angular.io/pull/2349
`ComponentFactory`s can now be created from a `ViewDefinitionFactory` via
`RefFactory.createComponentFactory`.
This commit also:
- splits `Services` into `Refs` and `RootData`
- changes `ViewState` into a bitmask
- implements `ViewContainerRef.move`
Part of #14013
PR Close#14237
1. Use `jasmine` as framework instead of `jasmine2`.
(Since angular/protractor@2bde92b, `jasmine2` is an alias for `jasmine`.)
2. Simplify the `chromeOptions` config by always setting.
(If `process.env.CHROME_BIN` is not defined, `binary` will be ignored.)
Much of the formatting was hardcoded and copied from the old anguar.io
jade files. This gives us a clean start.
Also, more use has been made of include files to make the templates
easier to understand and manage.
Note, this affects the underlying class and should not affect usage.
DEPRECATION:
- the `NgFor` class is now deprecated. Use `NgForOf<T>` instead.
IMPORTANT: Only the `NgFor` class is deprecated, not the `ngFor`
directive. The `*ngFor` and related directives are unaffected by
this change as references to the `NgFor` class generated from
templates will be automatically converted to references to
`NgForOf<T>` without requiring any template modifications.
- `TrackByFn` is now deprecated. Use `TrackByFunction<T>` instead.
Migration:
- Replace direct references to the `NgFor` class to `NgForOf<any>`.
- Replace references to `TrackByFn` to `TrackByFunction<any>`.
BREAKING CHANGE:
A definition of `Iterable<T>` is now required to correctly compile
Angular applications. Support for `Iterable<T>` is not required at
runtime but a type definition `Iterable<T>` must be available.
`NgFor`, and now `NgForOf<T>`, already supports `Iterable<T>` at
runtime. With this change the type definition is updated to reflect
this support.
Migration:
- add "es2015.iterable.ts" to your tsconfig.json "libs" fields.
Part of #12398
PR Close#14104
Correctly wire up hierarchical injectors for downgraded components in
`upgrade/static`: Downgraded components inherit the injector of the first
downgraded component up the DOM tree.
This is similar to (part of) d91a86a, but for `upgrade/static`.
POSSIBLE BREAKING CHANGE:
In order to enable more control over the wiring of downgraded components and
their content (which eventually allows better control over features like
injector setup and content projection), it was necessary to change the
implementation of the directives generated for downgraed components.
The directives are now terminal and manually take care of projecting and
compiling their contents in the post-linking function. This is similar to how
the dynamic version of `upgrade` does it.
This is not expected to affect apps, since the relative order of individual
operations is preserved. Still, it is difficult to predict how every possible
usecase may be affected.
This affects the dynamic version of `upgrade` and makes it more consistent with
the static version, while removing an artificial limitation.
This commit also refactors the file layout and code, in order to share code wrt
to dowgrading components between the dynamic and static versions.
This makes it more consistent with the dynamic version of `upgrade` and makes it
possible to share code between the dynamic and static versions.
This commit also refactors the file layout, moving common and dynamic-specific
files to `common/` and `dynamic/` directories respectively and renaming `aot/`
to `static/`.
Some private keys, used as AngularJS DI tokens, have also been renamed, but this
should not affect apps, since these keys are undocumented and not supposed to
be used externally.
BREAKING CHANGE:
Previously, `upgrade/static/downgradeInjectable` returned an array of the form:
```js
['dep1', 'dep2', ..., function factory(dep1, dep2, ...) { ... }]
```
Now it returns a function with an `$inject` property:
```js
factory.$inject = ['dep1', 'dep2', ...];
function factory(dep1, dep2, ...) { ... }
```
It shouldn't affect the behavior of apps, since both forms are equally suitable
to be used for registering AngularJS injectable services, but it is possible
that type-checking might fail or that current code breaks if it relies on the
returned value being an array.
`params` has been introduced in 4.0.0-beta.0
Before:
http.get(url, new RequestOptions({params: searchParams}))
After:
http.get(url, {params: searchParams})
Fixes#14100
PR Close#14101
- restrict root to be just root
- add fallback users to all groups
- fix indentation
- change order of users so that primary reviewers are first, follow by alpha-sorted secondaries, followed by fallback reviewers
Make sure that context (`this`) that is passed to functions generated by test helpers is passed through to the callback functions. Enables usage of Jasmine's variable sharing system to prevent accidental memory leaks during test runs.
* doc(public_api): change description
Benchpress has been moved to angular/angular in modules/@angular/benchpress
* docs(public_api): change description
Here means 'other projects',like angular-cli, Angular Material. And as we know, benchpress project has been moved to angular/angular in modules/@angular/benchpress. It should not be 'other projects'.
ReflectiveInjector previously used two strategies for resolving dependencies. These
were to support the Dart implementation, but are no longer needed. A result of this
PR is there is no longer a 20 dependency limit and the generated code is smaller.
PR Close#14126
Angular 1.x -> AngularJS
Angular 1 -> AngularJS
Angular1 -> AngularJS
Angular 2+ -> Angular
Angular 2.0 -> Angular
Angular2 -> Angular
I have deliberately not touched any of the symbol names as that would cause big merge collisions with Tobias's work.
All the renames are in .md, .json, and inline comments and jsdocs.
PR Close#14132
Also have a new node type for queries.
This leads to less memory usage and better performance.
Deep Tree Benchmark results (depth 11):
- createAndDestroy (view engine vs current codegen):
* pureScriptTime: 78.80+-4% vs 72.34+-4%
* scriptTime: 78.80+-4% vs 90.71+-9%
* gc: 5371.66+-108% vs 9717.53+-174%
* i.e. faster when gc is also considered and about 2x less memory usage!
- update unchanged
Part of #14013
PR Close#14120
This commit effectively reverts 7e0f02f but for `upgrade/static`
as it was an invalid fix for #6385, that created a more significant
bug, which was that changes were not always being detected.
Angular 1 digests should be run inside the ngZone to ensure
that async changes are detected.
We don't know how to fix#6385 without breaking change detection
at this stage. That issue is triggered by async operations, such as
`setTimeout`, being triggered inside scope watcher functions.
One could argue that watcher functions should be pure and not do
work such as triggering async operations. It is possible that the
original use case could be supported by moving the debounce
logic into the watch listener function, which is only called if the
watched value actually changes.
See #13812
PR Close#14039
* feat: add an env for testing closure builds
* build(npm): add dev dependency on yarn (and remove dev props for readability)
* build: refactor integration test runner
Allow NgComponentOutlet to dynamically load a module, then load a component from
that module. Useful for lazy loading code, then add the lazy loaded code to the
page using NgComponentOutlet.
Closes#14043
There are restrictions on the character set that can be used for xmb and xtb
placeholder names.
However because changing the placeholder names would change the message IDs it
is not possible to add those restrictions to the names used internally. Then we
have to map internal name to public names when generating an xmb file and back
when translating using an xtb file.
Note for implementors of `Serializer`:
- When writing a file, the implementor should take care of converting the
internal names to public names while visiting the message nodes - this is
required because the original nodes are needed to compute the message ID.
- When reading a file, the implementor does not need to take care of the mapping
back to internal names as this is handled in the `I18nToHtmlVisitor` used by the
`TranslationBundle`.
fixes b/34339636
This patch adds the gulp command of `validate-commit-messages`
which will validate the range of commits messages present in the
active branch.
This check now runs on CI as part of the linting checks.
Allowed commit message types and scopes are controlled via commit-message.json file
and documented at https://github.com/angular/angular/blob/master/CONTRIBUTING.md#-commit-message-guidelines
This solution is based on old Vojta's code that he wrote for angular/angular.js, that was later adjusted
by @matsko in #13815.
Ideally we should switch over to something like https://www.npmjs.com/package/commitplease
as suggested in #9953 but that package currently doesn't support strict scope checking,
which is one of the primarily goal of this PR.
Note that this PR removes support for "chore" which was previously overused
by everyone on the team.
Closes#13815Fixes#3337
The new view engine allows our codegen to produce less code,
as it can interpret view definitions during runtime.
The view engine is not feature complete yet, but already
allows to implement a tree benchmark based on it.
Part of #14013
- Introduce `InjectionToken<T>` which is a parameterized and type-safe
version of `OpaqueToken`.
DEPRECATION:
- `OpaqueToken` is now deprecated, use `InjectionToken<T>` instead.
- `Injector.get(token: any, notFoundValue?: any): any` is now deprecated
use the same method which is now overloaded as
`Injector.get<T>(token: Type<T>|InjectionToken<T>, notFoundValue?: T): T;`.
Migration
- Replace `OpaqueToken` with `InjectionToken<?>` and parameterize it.
- Migrate your code to only use `Type<?>` or `InjectionToken<?>` as
injection tokens. Using other tokens will not be supported in the
future.
BREAKING CHANGE:
- Because `injector.get()` is now parameterize it is possible that code
which used to work no longer type checks. Example would be if one
injects `Foo` but configures it as `{provide: Foo, useClass: MockFoo}`.
The injection instance will be that of `MockFoo` but the type will be
`Foo` instead of `any` as in the past. This means that it was possible
to call a method on `MockFoo` in the past which now will fail type
check. See this example:
```
class Foo {}
class MockFoo extends Foo {
setupMock();
}
var PROVIDERS = [
{provide: Foo, useClass: MockFoo}
];
...
function myTest(injector: Injector) {
var foo = injector.get(Foo);
// This line used to work since `foo` used to be `any` before this
// change, it will now be `Foo`, and `Foo` does not have `setUpMock()`.
// The fix is to downcast: `injector.get(Foo) as MockFoo`.
foo.setUpMock();
}
```
PR Close#13785
This commit effectively reverts 7e0f02f96e
as it was an invalid fix for #6385, that created a more significant
bug, which was that changes were not always being detected.
Angular 1 digests should be run inside the ngZone to ensure
that async changes are detected.
We don't know how to fix#6385 without breaking change detection
at this stage. That issue is triggered by async operations, such as
`setTimeout`, being triggered inside scope watcher functions.
One could argue that watcher functions should be pure and not do
work such as triggering async operations. It is possible that the
original use case could be supported by moving the debounce
logic into the watch listener function, which is only called if the
watched value actually changes.
Closes#10660, #12318, #12034
PR Close#13812
While authoring this document we agreed to pushing off the 4.0.0 release by one week by adding one more RC week (compared to the original plan).
We announced that RC would take 1 month, but then I did the calendar math incorrectly.
This schedule change will give community more time to test the release before we call it done and report any potential regression or unforeseen issues.
The change avoids the compiler CLI internal API from mismatching the following case as lazy loading
```
import { NonLazyLoadedModule } from './non-lazy-loaded/non-lazy-loaded.module';
export function getNonLazyLoadedModule() { return NonLazyLoadedModule; }
export const routes = [
{ path: '/some-path', loadChildren: getNonLazyLoadedModule }
];
```
The output of the check is later passed to `RouteDef.fromString()`, so, it makes sense to be only a string.
Fixesangular/angular-cli#3204
- remove outer `<div>` in tests,
- use `<ng-container>` instead of `<template>` where possible,
- use *... instead of template (tag or attr) where possible.
Fixes#13816
With this change the resolver is called when the parameter for the activated and any parent routes change.
ie, switching from `/teams/10/players/5` to `/teams/12/players/5` will now trigger any `PlayerResolver`.
CHANGES:
- Remove unused `onDestroy` method on the `KeyValueDiffer` and
`IterableDiffer`.
DEPRECATION:
- `CollectionChangeRecord` is renamed to `IterableChangeRecord`.
`CollectionChangeRecord` is aliased to `IterableChangeRecord` and is
marked as `@deprecated`. It will be removed in `v5.x.x`.
- Deprecate `DefaultIterableDiffer` as it is private class which
was erroneously exposed.
- Deprecate `KeyValueDiffers#factories` as it is private field which
was erroneously exposed.
- Deprecate `IterableDiffers#factories` as it is private field which
was erroneously exposed.
BREAKING CHANGE:
- `IterableChangeRecord` is now an interface and parameterized on `<V>`.
This should not be an issue unless your code does
`new IterableChangeRecord` which it should not have a reason to do.
- `KeyValueChangeRecord` is now an interface and parameterized on `<V>`.
This should not be an issue unless your code does
`new IterableChangeRecord` which it should not have a reason to do.
Original PR #12570Fixes#13382
This change adds Compiler CLI support for any level of nesting for lazy routes.
For example `{app-root}/lazy-loaded-module-1/lazy-loaded-module-2/lazy-loaded-module-3`
Where `lazy-loaded-module-3` is lazy loaded from `lazy-loaded-module-2`,
and `lazy-loaded-module-2` is lazy loaded from module `lazy-loaded-module-1`,
and `lazy-loaded-module-1` is lazy loaded from `AppModule`
Fixesangular/angular-cli#3663
This was done in order for us to be able to publish tsc-wrapped as @next tag on npm.
The next step is to change the build scripts to version and release @angular/tsc-wrapped
together with all the other packages. I'll create an issue/PR for this.
@angular/language-service now supports using TypeScript 2.1 as the
the TypeScript host. TypeScript 2.1 is now also partially supported
in `ngc` but is not recommended as Tsickle does not yet support 2.1.
Detailed changes:
- remove `UNINITIALIZED`, initialize change detection fields with `undefined`.
* we use `view.numberOfChecks === 0` now everywhere
as indicator whether we are in the first change detection cycle
(previously we used this only in a couple of places).
* we keep the initialization itself as change detection get slower without it.
- remove passing around `throwOnChange` in various generated calls,
and store it on the view as property instead.
- change generated code for bindings to DOM elements as follows:
Before:
```
var currVal_10 = self.context.bgColor;
if (jit_checkBinding15(self.throwOnChange,self._expr_10,currVal_10)) {
self.renderer.setElementStyle(self._el_0,'backgroundColor',((self.viewUtils.sanitizer.sanitize(jit_21,currVal_10) == null)? null: self.viewUtils.sanitizer.sanitize(jit_21,currVal_10).toString()));
self._expr_10 = currVal_10;
}
var currVal_11 = jit_inlineInterpolate16(1,' ',self.context.data.value,' ');
if (jit_checkBinding15(self.throwOnChange,self._expr_11,currVal_11)) {
self.renderer.setText(self._text_1,currVal_11);
self._expr_11 = currVal_11;
}
```,
After:
```
var currVal_10 = self.context.bgColor;
jit_checkRenderStyle14(self,self._el_0,'backgroundColor',null,self._expr_10,self._expr_10=currVal_10,false,jit_21);
var currVal_11 = jit_inlineInterpolate15(1,' ',self.context.data.value,' ');
jit_checkRenderText16(self,self._text_1,self._expr_11,self._expr_11=currVal_11,false);
```
Performance impact:
- None seen (checked against internal latency lab)
Part of #13651
Fixes:
- Inject the i18n specific HtmlParser into the directive normalizer,
- Parse ICU messages while normalizing templates,
- Normalize (visit) the content of ICU messages.
🎄🎁🎅
With the exception of `$onChanges()`, all lifecycle hooks in ng1 are called on
the controller, regardless if it is the binding destination or not (i.e.
regardless of the value of `bindToController`).
This change makes `upgrade` mimic that behavior when calling lifecycle hooks.
Additionally, calling the `$onInit()` hook has been moved before calling the
linking functions, which also mimics the ng1 behavior.
Note: This checks the constructors of `@Injectable` classes more strictly.
E.g this will fail now as the constructor argument has no `@Inject` nor is
the type of the argument a DI token.
```
@Injectable()
class MyService {
constructor(dep: string) {}
}
```
Last part of #12787Closes#12787
Now that rxjs is stable and the rxjs team follows semver, we can update and unpin the dependency safely.
From now on the Angular application/library developers are in charge of controlling the rxjs version as long as it's newer than 5.0.1.
closes#13561closes#13478closes#13572
* doc(compiler): fix the ICU expander API docs
* test(compiler): add lexer and parser specs
* fix(compiler): do not lex `}}` when interpolation is disabled
fix#13525
Fix an issue in `registerForNg1Tests`, where it passes a `null` as
`ng1Injector` to `_bootstrapDone`. This causes a "TypeError: Cannot
read property 'get' of null" to be thrown from `_bootstrapDone`.
This change retracts support for metadata version 2.
The collector used to produce version 2 metadata was incomplete
and can cause the AOT compiler to fail to resolve symbols or
produce other spurious errors.
All libraries compiled and published with 2.3.0 ngc will need
to be recompiled and updated with this change.
- New method `UpgradeAdapter.registerForNg1Tests(modules)` declares the
Angular 1 upgrade module and provides it to the `angular.mock.module()`
helper.
This prevents the need to bootstrap the entire hybrid for every test.
Closes#5462, #12675
- Full support for content projection in downgraded Angular 2
components. In particular, this enables multi-slot projection and
other features on <ng-content>.
- Correctly wire up hierarchical injectors for downgraded Angular 2
components: downgraded components inherit the injector of the first
other downgraded Angular 2 component they find up the DOM tree.
Closes#6629, #7727, #8729, #9643, #9649, #12675
feat(tsc-wrapped): recored when to quote a object literal key
Collecting quoted literals is off by default as it introduces
a breaking change in the .metadata.json file. A follow-up commit
will address this.
Fixes#13249Closes#13356
If you bound an array to select[multiple] via ngModel and subsequently
changed the options to select from, the UI would drop any selections
made since by the user. This was due to
SelectMultipleControlValueAccessor not keeping a reference to the new
model arrays it generated when users interacted with the select control.
Update code to keep the reference.
Closes#12527Closes#12654
When an invalid model value (eg empty string) was preset ngModel on
select[multiple] would throw an error, which is inconsistent with how it
works on other user input elements. Setting the model value to null or
undefined would also have no effect on what was already selected in the
UI. Fix this by clearing selected options when model set to null,
undefined or a type other than Array.
Closes#11926
The existing intl.ts file is not a facade but
rather a set of utils used by i18n-related pipes only.
As such moving it back to common module so those utils
are not used accidently from other places.
NgIf syntax has been extended to support else clause to display template
when the condition is false. In addition the condition value can now
be stored in local variable, for later reuse. This is especially useful
when used with the `async` pipe.
Example:
```
<div *ngIf="userObservable | async; else loading; let user">
Hello {{user.last}}, {{user.first}}!
</div>
<template #loading>Waiting...</template>
```
closes#13061closes#13297
When compiling libraries, this feature extracts the minimal information
from the directives/pipes/modules of the library into `.ngsummary.json` files,
so that applications that use this library only need to be recompiled
if one of the summary files change, but not on every change
of the libraries (e.g. one of the templates).
Only works if individual codegen for libraries is enabled,
see the `generateCodeForLibraries: false` option.
Closes#12787
Removes `CompileIdentifierMetadata.name` / `.moduleUrl`,
as well as `CompileTypeMetadata.name / moduleUrl` and
`CompileFactoryMetadata.name / moduleUrl`.
## Inheritance Semantics:
Decorators:
1) list the decorators of the class and its parents in the ancestor first order
2) only use the last decorator of each kind (e.g. @Component / ...)
Constructor parameters:
If a class inherits from a parent class and does not declare
a constructor, it inherits the parent class constructor,
and with it the parameter metadata of that parent class.
Lifecycle hooks:
Follow the normal class inheritance model,
i.e. lifecycle hooks of parent classes will be called
even if the method is not overwritten in the child class.
## Example
E.g. the following is a valid use of inheritance and it will
also inherit all metadata:
```
@Directive({selector: 'someDir'})
class ParentDirective {
constructor(someDep: SomeDep) {}
ngOnInit() {}
}
class ChildDirective extends ParentDirective {}
```
Closes#11606Closes#12892
The change looks bigger than it really is because I reordered the properties to match other tsconfigs we have.
The only real change is removal of sourceRoot property.
Fixes#13040
<!-- Check whether this is still an issue in the most recent Angular version -->
* **Browser:** [all | Chrome XX | Firefox XX | IE XX | Safari XX | Mobile Chrome XX | Android X.X Web Browser | iOS XX Safari | iOS XX UIWebView | iOS XX WKWebView ]
<!-- All browsers where this could be reproduced -->
# the g3 status will be added to your pull requests if they include files that match the patterns
g3Status:
# set to true to disable
disabled:false
# the name of the status
context:"google3"
# text to show when the status is pending, {{PRNumber}} will be replaced by the PR number
pendingDesc:"Googler: run g3sync presubmit {{PRNumber}}"
# text to show when the status is success
successDesc:"Does not affect google3"
# link to use for the details
url:"http://go/angular-g3sync"
# list of patterns to check for the files changed by the PR
# this list must be manually kept in sync with google3/third_party/javascript/angular2/copy.bara.sky
include:
- "LICENSE"
- "modules/**"
- "packages/**"
# list of patterns to ignore for the files changed by the PR
exclude:
- "packages/language-service/**"
- "**/.gitignore"
- "**/.gitkeep"
- "**/package.json"
- "**/tsconfig-build.json"
- "**/tsconfig.json"
- "**/rollup.config.js"
- "**/BUILD.bazel"
- "packages/**/integrationtest/**"
- "packages/**/test/**"
# comment that will be added to a PR when there is a conflict, leave empty or set to false to disable
mergeConflictComment:"Hi @{{PRAuthor}}! This PR has merge conflicts due to recent upstream merges.
\nPlease help to unblock it by resolving these conflicts. Thanks!"
# label to monitor
mergeLabel:"PR action: merge"
# list of checks that will determine if the merge label can be added
checks:
# require that the PR has reviews from all requested reviewers
#
# This enables us to request reviews from both eng and tech writers, or multiple eng folks, and prevents accidental merges.
# Rather than merging PRs with pending reviews, if all PullApprove requirements are satisfied and additional reviews are not needed pending reviewers should be removed via GitHub UI (this also leaves an audit trail behind these decisions).
requireReviews:true,
# whether the PR shouldn't have a conflict with the base branch
noConflict:true
# list of labels that a PR needs to have, checked with a regexp (e.g. "PR target:" will work for the label "PR target: master")
requiredLabels:
- "PR target: *"
- "cla: yes"
# list of labels that a PR shouldn't have, checked after the required labels with a regexp
forbiddenLabels:
- "PR target: TBD"
- "PR action: cleanup"
- "PR action: review"
- "PR state: blocked"
- "cla: no"
# list of PR statuses that need to be successful
requiredStatuses:
- "continuous-integration/travis-ci/pr"
- "code-review/pullapprove"
- "ci/circleci: build"
- "ci/circleci: lint"
# the comment that will be added when the merge label is added despite failing checks, leave empty or set to false to disable
# {{MERGE_LABEL}} will be replaced by the value of the mergeLabel option
# {{PLACEHOLDER}} will be replaced by the list of failing checks
mergeRemovedComment:"I see that you just added the `{{MERGE_LABEL}}` label, but the following checks are still failing:
\n{{PLACEHOLDER}}
\n
\n**If you want your PR to be merged, it has to pass all the CI checks.**
\n
\nIf you can't get the PR to a green state due to flakes or broken master, please try rebasing to master and/or restarting the CI job. If that fails and you believe that the issue is not due to your change, please contact the caretaker and ask for help."
# options for the triage plugin
triage:
# number of the milestone to apply when the issue has not been triaged yet
needsTriageMilestone:83,
# number of the milestone to apply when the issue is triaged
defaultMilestone:82,
# arrays of labels that determine if an issue has been triaged by the caretaker
l1TriageLabels:
-
- "comp: *"
# arrays of labels that determine if an issue has been fully triaged
As contributors and maintainers of the Angular project, we pledge to respect everyone who contributes by posting issues, updating documentation, submitting pull requests, providing feedback in comments, and any other activities.
Communication through any of Angular's channels (GitHub, Gitter, IRC, mailing lists, Google+, Twitter, etc.) must be constructive and never resort to personal attacks, trolling, public or private harassment, insults, or other unprofessional conduct.
We promise to extend courtesy and respect to everyone involved in this project regardless of gender, gender identity, sexual orientation, disability, age, race, ethnicity, religion, or level of experience. We expect anyone contributing to the Angular project to do the same.
If any member of the community violates this code of conduct, the maintainers of the Angular project may take action, removing issues, comments, and PRs or blocking accounts as deemed appropriate.
If you are subject to or witness unacceptable behavior, or have any other concerns, please email us at [conduct@angular.io](mailto:conduct@angular.io).
@ -17,15 +17,15 @@ Help us keep Angular open and inclusive. Please read and follow our [Code of Con
## <a name="question"></a> Got a Question or Problem?
Please, do not open issues for the general support questions as we want to keep GitHub issues for bug reports and feature requests. You've got much better chances of getting your question answered on [StackOverflow](https://stackoverflow.com/questions/tagged/angular) where the questions should be tagged with tag `angular`.
Do not open issues for general support questions as we want to keep GitHub issues for bug reports and feature requests. You've got much better chances of getting your question answered on [StackOverflow](https://stackoverflow.com/questions/tagged/angular) where the questions should be tagged with tag `angular`.
StackOverflow is a much better place to ask questions since:
StackOverflow is a much better place to ask questions since:
- there are thousands of people willing to help on StackOverflow
- there are thousands of people willing to help on StackOverflow
- questions and answers stay available for public viewing so your question / answer might help someone else
- StackOverflow's voting system assures that the best answers are prominently visible.
- StackOverflow's voting system assures that the best answers are prominently visible.
To save your and our time we will be systematically closing all the issues that are requests for general support and redirecting people to StackOverflow.
To save your and our time, we will systematically close all issues that are requests for general support and redirect people to StackOverflow.
If you would like to chat about the question in real-time, you can reach out via [our gitter channel][gitter].
@ -51,17 +51,17 @@ and help you to craft the change so that it is successfully accepted into the pr
Before you submit an issue, please search the issue tracker, maybe an issue for your problem already exists and the discussion might inform you of workarounds readily available.
We want to fix all the issues as soon as possible, but before fixing a bug we need to reproduce and confirm it. In order to reproduce bugs we will systematically ask you to provide a minimal reproduction scenario using http://plnkr.co. Having a live, reproducible scenario gives us wealth of important information without going back & forth to you with additional questions like:
We want to fix all the issues as soon as possible, but before fixing a bug we need to reproduce and confirm it. In order to reproduce bugs, we will systematically ask you to provide a minimal reproduction scenario using http://plnkr.co. Having a live, reproducible scenario gives us a wealth of important information without going back & forth to you with additional questions like:
- version of Angular used
- 3rd-party libraries and their versions
- and most importantly - a use-case that fails
A minimal reproduce scenario using http://plnkr.co/ allows us to quickly confirm a bug (or point out coding problem) as well as confirm that we are fixing the right problem. If plunker is not a suitable way to demostrate the problem (for example for issues related to our npm packaging), please create a standalone git repository demostrating the problem.
A minimal reproduce scenario using http://plnkr.co/ allows us to quickly confirm a bug (or point out coding problem) as well as confirm that we are fixing the right problem. If plunker is not a suitable way to demonstrate the problem (for example for issues related to our npm packaging), please create a standalone git repository demonstrating the problem.
We will be insisting on a minimal reproduce scenario in order to save maintainers time and ultimately be able to fix more bugs. Interestingly, from our experience users often find coding problems themselves while preparing a minimal plunk. We understand that sometimes it might be hard to extract essentials bits of code from a larger code-base but we really need to isolate the problem before we can fix it.
Unfortunately we are not able to investigate / fix bugs without a minimal reproduction, so if we don't hear back from you we are going to close an issue that don't have enough info to be reproduced.
Unfortunately, we are not able to investigate / fix bugs without a minimal reproduction, so if we don't hear back from you we are going to close an issue that doesn't have enough info to be reproduced.
You can file new issues by filling out our [new issue form](https://github.com/angular/angular/issues/new).
@ -69,36 +69,37 @@ You can file new issues by filling out our [new issue form](https://github.com/a
### <a name="submit-pr"></a> Submitting a Pull Request (PR)
Before you submit your Pull Request (PR) consider the following guidelines:
* Search [GitHub](https://github.com/angular/angular/pulls) for an open or closed PR
1. Search [GitHub](https://github.com/angular/angular/pulls) for an open or closed PR
that relates to your submission. You don't want to duplicate effort.
We cannot accept code without this. Make sure you sign with the primary email address of the Git identity that has been granted access to the Angular repository.
1. Fork the angular/angular repo.
1. Make your changes in a new git branch:
```shell
git checkout -b my-fix-branch master
```
* Create your patch, **including appropriate test cases**.
* Follow our [Coding Rules](#rules).
* Run the full Angular test suite, as described in the [developer documentation][dev-doc],
1. Create your patch, **including appropriate test cases**.
1. Follow our [Coding Rules](#rules).
1. Run the full Angular test suite, as described in the [developer documentation][dev-doc],
and ensure that all tests pass.
* Commit your changes using a descriptive commit message that follows our
1. Commit your changes using a descriptive commit message that follows our
[commit message conventions](#commit). Adherence to these conventions
is necessary because release notes are automatically generated from these messages.
```shell
git commit -a
```
Note: the optional commit `-a` command line option will automatically "add" and "rm" edited files.
Note: the optional commit `-a` command line option will automatically "add" and "rm" edited files.
* Push your branch to GitHub:
1. Push your branch to GitHub:
```shell
git push origin my-fix-branch
```
* In GitHub, send a pull request to `angular:master`.
1. In GitHub, send a pull request to `angular:master`.
* If we suggest changes then:
* Make the required updates.
* Re-run the Angular test suites to ensure tests are still passing.
@ -147,7 +148,7 @@ To ensure consistency throughout the source code, keep these rules in mind as yo
* All public API methods **must be documented**. (Details TBC).
* We follow [Google's JavaScript Style Guide][js-style-guide], but wrap all code at
**100 characters**. An automated formatter is available, see
@ -172,12 +173,12 @@ The **header** is mandatory and the **scope** of the header is optional.
Any line of the commit message cannot be longer 100 characters! This allows the message to be easier
to read on GitHub as well as in various git tools.
Footer should contain a [closing reference to an issue](https://help.github.com/articles/closing-issues-via-commit-messages/) if any.
The footer should contain a [closing reference to an issue](https://help.github.com/articles/closing-issues-via-commit-messages/) if any.
Samples: (even more [samples](https://github.com/angular/angular/commits/master))
```
docs(changelog): update changelog to beta.5
docs(changelog): update changelog to beta.5
```
```
fix(release): need to depend on latest rxjs and zone.js
@ -191,27 +192,56 @@ If the commit reverts a previous commit, it should begin with `revert: `, follow
### Type
Must be one of the following:
* **feat**: A new feature
* **fix**: A bug fix
* **docs**: Documentation only changes
* **style**: Changes that do not affect the meaning of the code (white-space, formatting, missing
semi-colons, etc)
* **refactor**: A code change that neither fixes a bug nor adds a feature
* **perf**: A code change that improves performance
* **test**: Adding missing tests or correcting existing tests
* **build**: Changes that affect the build system or external dependencies (example scopes: gulp, broccoli, npm)
* **ci**: Changes to our CI configuration files and scripts (example scopes: Travis, Circle, BrowserStack, SauceLabs)
* **chore**: Other changes that don't modify `src` or `test` files
* **docs**: Documentation only changes
* **feat**: A new feature
* **fix**: A bug fix
* **perf**: A code change that improves performance
* **refactor**: A code change that neither fixes a bug nor adds a feature
* **style**: Changes that do not affect the meaning of the code (white-space, formatting, missing semi-colons, etc)
* **test**: Adding missing tests or correcting existing tests
### Scope
The scope could be anything specifying place of the commit change. For example
`Compiler`, `ElementInjector`, etc.
The scope should be the name of the npm package affected (as perceived by the person reading the changelog generated from commit messages.
The following is the list of supported scopes:
* **animations**
* **common**
* **compiler**
* **compiler-cli**
* **core**
* **elements**
* **forms**
* **http**
* **language-service**
* **platform-browser**
* **platform-browser-dynamic**
* **platform-server**
* **platform-webworker**
* **platform-webworker-dynamic**
* **router**
* **service-worker**
* **upgrade**
There are currently a few exceptions to the "use package name" rule:
* **packaging**: used for changes that change the npm package layout in all of our packages, e.g.
public path changes, package.json changes done to all packages, d.ts file/format changes, changes
to bundles, etc.
* **changelog**: used for updating the release notes in CHANGELOG.md
* **docs-infra**: used for docs-app (angular.io) related changes within the /aio directory of the
repo
* none/empty string: useful for `style`, `test` and `refactor` changes that are done across all
packages (e.g. `style: add missing semicolons`) and for docs changes that are not related to a
specific package (e.g. `docs: fix typo in tutorial`).
### Subject
The subject contains succinct description of the change:
The subject contains a succinct description of the change:
* use the imperative, present tense: "change" not "changed" nor "changes"
* don't capitalize first letter
* don't capitalize the first letter
* no dot (.) at the end
### Body
@ -235,16 +265,29 @@ changes to be accepted, the CLA must be signed. It's a quick process, we promise
* For corporations we'll need you to
[print, sign and one of scan+email, fax or mail the form][corporate-cla].
<hr>
If you have more than one Git identity, you must make sure that you sign the CLA using the primary email address associated with the ID that has been granted access to the Angular repository. Git identities can be associated with more than one email address, and only one is primary. Here are some links to help you sort out multiple Git identities and email addresses:
Note that if you have more than one Git identity, it is important to verify that you are logged in with the same ID with which you signed the CLA, before you commit changes. If not, your PR will fail the CLA check.
**Optional**: In this document, we make use of project local `npm` package scripts and binaries
(stored under `./node_modules/.bin`) by prefixing these command invocations with `$(npm bin)`; in
particular `gulp` and `protractor` commands. If you prefer, you can drop this path prefix by either:
*Option 1*: globally installing these two packages as follows:
*`npm install -g gulp` (you might need to prefix this command with `sudo`)
*`npm install -g protractor` (you might need to prefix this command with `sudo`)
Since global installs can become stale, and required versions can vary by project, we avoid their
use in these instructions.
*Option 2*: defining a bash alias like `alias nbin='PATH=$(npm bin):$PATH'` as detailed in this
[Stackoverflow answer](http://stackoverflow.com/questions/9679932/how-to-use-package-installed-locally-in-node-modules/15157360#15157360) and used like this: e.g., `nbin gulp build`.
## Windows only
In order to create the right symlinks, run **as administrator**:
```shell
./scripts/windows/create-symlinks.sh
```
Before submitting a PR, do not forget to remove them:
```shell
./scripts/windows/remove-symlinks.sh
```
## Building
To build Angular run:
```shell
./build.sh
```
* Results are put in the dist folder.
## Running Tests Locally
To run tests:
```shell
$ ./test.sh node # Run all angular tests on node
$ ./test.sh browser # Run all angular tests in browser
$ ./test.sh browserNoRouter # Optionally run all angular tests without router in browser
$ ./test.sh tools # Run angular tooling (not framework) tests
```
You should execute the 3 test suites before submitting a PR to github.
All the tests are executed on our Continuous Integration infrastructure and a PR could only be merged once the tests pass.
- CircleCI fails if your code is not formatted properly,
- Travis CI fails if any of the test suites described above fails.
## Update the public API tests
If you happen to modify the public API of Angular, API golden files must be updated using:
``` shell
$ gulp public-api:update
```
Note: The command `./test.sh tools` fails when the API doesn't match the golden files.
## Formatting your source code
Angular uses [clang-format](http://clang.llvm.org/docs/ClangFormat.html) to format the source code. If the source code
is not properly formatted, the CI will fail and the PR can not be merged.
You can automatically format your code by running:
[](https://gitter.im/angular/angular?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
[](https://saucelabs.com/u/angular2-ci)
*Safari (7+), iOS (7+), Edge (14) and IE mobile (11) are tested on [BrowserStack][browserstack].*
Angular
=========
Angular is a development platform for building mobile and desktop web applications. This is the
repository for [Angular 2][ng2] Typescript/JavaScript (JS).
Angular2 for [Dart][dart] can be found at [dart-lang/angular2][ng2dart].
# Angular
Angular is a development platform for building mobile and desktop web applications using Typescript/JavaScript and other languages.
## Quickstart
[Get started in 5 minutes][quickstart].
## Changelog
[Learn about the latest improvements][changelog].
## Want to help?
Want to file a bug, contribute some code, or improve documentation? Excellent! Read up on our
guidelines for [contributing][contributing] and then check out one of our issues in the [hotlist: community-help](https://github.com/angular/angular/labels/hotlist%3A%20community-help).
Everything in this folder is part of the documentation project. This includes
* the web site for displaying the documentation
* the dgeni configuration for converting source files to rendered files that can be viewed in the web site.
* the tooling for setting up examples for development; and generating live-example and zip files from the examples.
## Developer tasks
We use [Yarn](https://yarnpkg.com) to manage the dependencies and to run build tasks.
You should run all these tasks from the `angular/aio` folder.
Here are the most important tasks you might need to use:
*`yarn` - install all the dependencies.
*`yarn setup` - install all the dependencies, boilerplate, stackblitz, zips and run dgeni on the docs.
*`yarn setup-local` - same as `setup`, but use the locally built Angular packages for aio and docs examples boilerplate.
*`yarn build` - create a production build of the application (after installing dependencies, boilerplate, etc).
*`yarn build-local` - same as `build`, but use `setup-local` instead of `setup`.
*`yarn start` - run a development web server that watches the files; then builds the doc-viewer and reloads the page, as necessary.
*`yarn serve-and-sync` - run both the `docs-watch` and `start` in the same console.
*`yarn lint` - check that the doc-viewer code follows our style rules.
*`yarn test` - watch all the source files, for the doc-viewer, and run all the unit tests when any change.
*`yarn test --watch=false` - run all the unit tests once.
*`yarn e2e` - run all the e2e tests for the doc-viewer.
*`yarn docs` - generate all the docs from the source files.
*`yarn docs-watch` - watch the Angular source and the docs files and run a short-circuited doc-gen for the docs that changed.
*`yarn docs-lint` - check that the doc gen code follows our style rules.
*`yarn docs-test` - run the unit tests for the doc generation code.
*`yarn boilerplate:add` - generate all the boilerplate code for the examples, so that they can be run locally. Add the option `--local` to use your local version of Angular contained in the "dist" folder.
*`yarn boilerplate:remove` - remove all the boilerplate code that was added via `yarn boilerplate:add`.
*`yarn generate-stackblitz` - generate the stackblitz files that are used by the `live-example` tags in the docs.
*`yarn generate-zips` - generate the zip files from the examples. Zip available via the `live-example` tags in the docs.
*`yarn example-e2e` - run all e2e tests for examples
-`yarn example-e2e --setup` - force webdriver update & other setup, then run tests
-`yarn example-e2e --filter=foo` - limit e2e tests to those containing the word "foo"
-`yarn example-e2e --setup --local` - run e2e tests with the local version of Angular contained in the "dist" folder
*`yarn build-ie-polyfills` - generates a js file of polyfills that can be loaded in Internet Explorer.
## Developing on Windows
The `packages/` directory may contain Linux-specific symlinks, which are not recognized by Windows.
These unresolved links cause the docs generation process to fail because it cannot locate certain files.
> Hint: The following steps require administration rights or [Windows Developer Mode](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development) enabled!
To fix this problem, run `scripts/windows/create-symlinks.sh`. This command creates temporary files where the symlinks used to be. Make sure not to commit those files with your documentation changes.
When you are done making and testing your documentation changes, you can restore the original symlinks and delete the temporary files by running `scripts/windows/remove-symlinks.sh`.
It's necessary to remove the temporary files, because otherwise they're displayed as local changes in your git working copy and certain operations are blocked.
## Using ServiceWorker locally
Running `yarn start` (even when explicitly targeting production mode) does not set up the
ServiceWorker. If you want to test the ServiceWorker locally, you can use `yarn build` and then
serve the files in `dist/` with `yarn http-server dist -p 4200`.
## Guide to authoring
There are two types of content in the documentation:
* **API docs**: descriptions of the modules, classes, interfaces, decorators, etc that make up the Angular platform.
API docs are generated directly from the source code.
The source code is contained in TypeScript files, located in the `angular/packages` folder.
Each API item may have a preceding comment, which contains JSDoc style tags and content.
The content is written in markdown.
* **Other content**: guides, tutorials, and other marketing material.
All other content is written using markdown in text files, located in the `angular/aio/content` folder.
More specifically, there are sub-folders that contain particular types of content: guides, tutorial and marketing.
* **Code examples**: code examples need to be testable to ensure their accuracy.
Also, our examples have a specific look and feel and allow the user to copy the source code. For larger
examples they are rendered in a tabbed interface (e.g. template, HTML, and TypeScript on separate
tabs). Additionally, some are live examples, which provide links where the code can be edited, executed, and/or downloaded. For details on working with code examples, please read the [Code snippets](https://angular.io/guide/docs-style-guide#code-snippets), [Source code markup](https://angular.io/guide/docs-style-guide#source-code-markup), and [Live examples](https://angular.io/guide/docs-style-guide#live-examples) pages of the [Authors Style Guide](https://angular.io/guide/docs-style-guide).
We use the [dgeni](https://github.com/angular/dgeni) tool to convert these files into docs that can be viewed in the doc-viewer.
The [Authors Style Guide](https://angular.io/guide/docs-style-guide) prescribes guidelines for
writing guide pages, explains how to use the documentation classes and components, and how to markup sample source code to produce code snippets.
### Generating the complete docs
The main task for generating the docs is `yarn docs`. This will process all the source files (API and other),
extracting the documentation and generating JSON files that can be consumed by the doc-viewer.
### Partial doc generation for editors
Full doc generation can take up to one minute. That's too slow for efficient document creation and editing.
You can make small changes in a smart editor that displays formatted markdown:
>In VS Code, _Cmd-K, V_ opens markdown preview in side pane; _Cmd-B_ toggles left sidebar
You also want to see those changes displayed properly in the doc viewer
with a quick, edit/view cycle time.
For this purpose, use the `yarn docs-watch` task, which watches for changes to source files and only
re-processes the the files necessary to generate the docs that are related to the file that has changed.
Since this task takes shortcuts, it is much faster (often less than 1 second) but it won't produce full
fidelity content. For example, links to other docs and code examples may not render correctly. This is
most particularly noticed in links to other docs and in the embedded examples, which may not always render
correctly.
The general setup is as follows:
* Open a terminal, ensure the dependencies are installed; run an initial doc generation; then start the doc-viewer:
```bash
yarn setup
yarn start
```
* Open a second terminal and start watching the docs
```bash
yarn docs-watch
```
>Alternatively, try the consolidated `serve-and-sync` command that builds, watches and serves in the same terminal window
```bash
yarn serve-and-sync
```
* Open a browser at https://localhost:4200/ and navigate to the document on which you want to work.
You can automatically open the browser by using `yarn start -o` in the first terminal.
* Make changes to the page's associated doc or example files. Every time a file is saved, the doc will
be regenerated, the app will rebuild and the page will reload.
* If you get a build error complaining about examples or any other odd behavior, be sure to consult
the [Authors Style Guide](https://angular.io/guide/docs-style-guide).
// "baseUrl": "./", /* Base directory to resolve non-absolute module names. */
// "paths": {}, /* A series of entries which re-map imports to lookup locations relative to the 'baseUrl'. */
// "rootDirs": [], /* List of root folders whose combined content represents the structure of the project at runtime. */
"typeRoots":[
"node_modules/@types"
],/*Listoffolderstoincludetypedefinitionsfrom.*/
// "types": [], /* Type declaration files to be included in compilation. */
// "allowSyntheticDefaultImports": true, /* Allow default imports from modules with no default export. This does not affect code emit, just typechecking. */
// "preserveSymlinks": true, /* Do not resolve the real path of symlinks. */
/*SourceMapOptions*/
// "sourceRoot": "./", /* Specify the location where debugger should locate TypeScript files instead of source locations. */
// "mapRoot": "./", /* Specify the location where debugger should locate map files instead of generated locations. */
// "inlineSources": true, /* Emit the source alongside the sourcemaps within a single file; requires '--inlineSourceMap' or '--sourceMap' to be set. */
/*ExperimentalOptions*/
// "experimentalDecorators": true, /* Enables experimental support for ES7 decorators. */
// "emitDecoratorMetadata": true, /* Enables experimental support for emitting type metadata for decorators. */
- Local DNS (via dnsmasq) maps the above hostnames to 127.0.0.1
## Developing the preview server TypeScript files
If you are running Docker on OS/X then you can benefit from linking the built TypeScript
files (i.e. `script-js/dist`) to the JavaScript files inside the Docker container.
First start watching and building the TypeScript files (in the host):
```bash
yarn build-watch
```
Now build, start and attach to the Docker container. See "Setting up the VM"
section in [TOC](_TOC.md). Then link the JavaScript folders (in the container):
```bash
aio-dev-mode
```
Now whenever you make changes to the TypeScript, it will be automatically built
in the host, and the changes are automatically available in the container.
You can then run the unit tests (in the container):
```bash
aio-verify-setup
```
Sometimes, the errors in the unit test log are not enough to tell you what went wrong.
In that case you can also look at the log of the preview-server itself.
A helper script that runs the unit tests (i.e. `aio-verify-setup`) and displays the
last relevant test-preview-server log is:
```bash
aio-verify-setup-and-log
```
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
