At the moment, paths stored in `maps` are not normalized and in Windows is causing files not to be found when enabling factory shimming.
For example, the map contents will be
```
Map {
'C:\\git\\cli-repos\\ng-factory-shims\\index.ngfactory.ts' => 'C:\\git\\cli-repos\\ng-factory-shims\\index.ts' }
```
However, ts compiler normalized the paths and is causing;
```
error TS6053: File 'C:/git/cli-repos/ng-factory-shims/index.ngfactory.ts' not found.
error TS6053: File 'C:/git/cli-repos/ng-factory-shims/index.ngsummary.ts' not found.
```
The changes normalized the paths that are stored within the factory and summary maps.
PR Close#28173
Right now the `ServerRendererFactory2` creates a new instance of the
`DomElementSchemaRegistry` for each and every request, which is quite
costly (for the Tour of Heroes SSR this takes around **30%** of the
overall execution time). Since the schema is never modified, but only
used in a read-only fashion, it should be possible to re-use a single
instance instead.
Naive performance testing with 100 concurrent connections and 1000
requests in total shows an approximate **33%** improvement in Req/Sec
on the Tour of Heroes SSR example.
PR Close#28150
PR Close#28151
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27680
The current integration test for Bazel schematics downloads a
published version of Angular as required by the http_archive
rule in the CLI created WORKSPACE.
However, this makes the test less useful because it does not
actually test any changes to the Angular repo at source.
This PR replaces the http_archive method in the WORSPACE
with local_repository so that any local changes to the Angular
repo are tested accordingly.
With Typescript 3.2, the file e2e/src/app.po.ts generated by CLI
no longer compiles under Bazel due to missing type annotations.
A temporary file is placed in the integration/bazel-schematics
directory while the change is pending in CLI repo.
https://github.com/angular/angular-cli/pull/13406
PR Close#28142
This commit fixes a bug whereby a Bazel project created by the
schematics would not compiled if project contains routing module.
It is missing a dependency on the router package.
PR Close#28141
* This is a follow-up to cd0451305a which fixes that "ngc-wrapped" from the "npm" workspace is always used if "angular" is fetched as an external dependency.
PR Close#28137
With the update to TypeScript 3.2.x, a big issue seems to have appeared for downstream Bazel users. If the downstream user still uses a lower TypeScript version, normal Bazel targets using the `ng_module` rule are still compiled with the correct/old TypeScript version (assuming they set the `node_modules` attribute properly).
But, if they build the previous Bazel targets by specifying them within a `ng_package` rule, the TypeScript version from the Angular `workspace` is being used for the replayed ESM5 compilation. This is because we resolve the replay compiler to `ngc_wrapped` or `tsc_wrapped` Bazel executables which are defined as part of the `angular` workspace. This means that the compilers are different if the downstream user uses `ngc-wrapped` from the `@npm` repository because the replayed compilation would use the compiler with `@ngdeps//typescript`.
In order to fix this, we should just use the compiler that is defined in the `@angular//BUILD.bazel` file. This target by defaults to the "@npm" workspace which is working for downstream users. This is similar to how it is handled for `tsc-wrapped`. `tsc-wrapped` works as expected for downstream users.
**Note**: This is not the ideal solution because ideally we would
completely respect the `compiler` option from the base `ng_module`, but
this is not possible in a hermetic way, unless we somehow accept the
`compiler` as an attribute that builds all transitive deps. This is
something we should explore in the future. For now, we just fix this in
a reasonable way that is also used for `tsc_wrapped` from the TypeScript
rules.
PR Close#28053
index.html needs to have the zone.js and the project bundle injected
using script tags. This used to be done explicitly by specifying a
new index.html but with `web_package` rule introduced in rules_nodejs,
it is now possible to perform the injection dynamically.
PR Close#27995
I think only should be after BrowserModule , because we can import more than BrowserModule and I think we need to import other modules to AppModule in most of cases and we should import BrowserModule only in AppModule,so that thing seems okay.
PR Close#27677
Link to the document "53 percent of mobile site visits" was changed, updated link. Old link led to a page that didn't have the statistics on it.
PR Close#26628
Occasionally, URLs take longer to load, which causes CI flakes.
In #27903, the timeout for external URLs was increased, but internal
URLs turned out to be affected as well.
PR Close#28103
Incremental rebuilds is a fundamental part of the development
workflow. `@bazel/ibazel` should be added to the dev dependencies
of a Bazel project.
PR Close#28090
The version was updated on master (with 0efbb3738), but the commit was
not backported to 7.2.x. As a result, the version on angular.io appears
as `7.2.0-rc.0` (instead of 7.2.0).
PR Close#28075
Changes:
- Change the project type to `service-worker`, so that it gets
appropriate `package.json` (with `@angular/service-worker` dependency)
and `angular.json` (with `serviceWorker: true` in production config).
- Move `ngsw-config.json` to the correct directory.
- Specify custom test commands for aio's `yarn example-e2e` to also
verify that the ServiceWorker bits are set up correctly.
PR Close#28020
Previously, cli-based docs examples were tested using `yarn e2e ...`. In
some cases, it might make sense to run different or additional checks
for a docs example (when running `yarn example-e2e` in `aio/`).
Currently, the only option is to define a custom project type and
overwrite the `e2e` yarn script in `package.json`. Doing so (in addition
to being cumbersome and verbose) would also end up in the `.zip` archive
that users can download to run the example locally. This would be
confusing, if these custom tests are specific to our CI needs.
This commit adds support for defining a custom list of commands per
example. These commands (if specified) would be run instead of the
default `yarn e2e ...`, when testing the docs examples on CI (via
`yarn example-e2e`).
(This feature will be used to verify that the
`service-worker-getting-started` example is set up correctly in a
subsequent commit, but can be useful in other cases as well.)
PR Close#28020
File overwrites:
- **angular.json**: Add `serviceWorker: true` to production config.
- **package.json**: Add `@angular/service-worker` to dependencies.
This will make any `service-worker` examples work out-of-the-box, when
downloading and running locally from the `.zip` archives.
PR Close#28020
* Interface that a class can implement to be a guard deciding if a children can be loaded.
'...if a children...' changed to '...if children...'
* Interface that a class can implement to be a guard deciding if children can be loaded.
PR Close#27894
This change matches the routes found in the following code example
for auth.guard.ts as well as the login.component.1.ts in the "Add
the LoginComponent" section.
PR Close#27879
There are various e2e tests with the `_spec.ts` suffix in the Angular project. Currently the protractor Bazel rule does not pick up these files and just ignores them. Since underscore is commonly used, we should support this.
Needed for the conversion fo the `examples` to Bazel.
PR Close#28022
Project created by @angular/cli depends on Bazel at build time and
we should not assume that Bazel is available globally.
Instead, the project should specify an explicit dev dependency on
`@bazel/bazel`.
PR Close#28032
Instead of relying on implicit dependencies through Angular, the WORKSPACE
of the project should explicitly add rules_nodejs and rules_typescript so
it can better control the versions.
PR Close#28000
* Fixes that the flat module out files do not have a proper AMD module name on Windows. This is currently blocking serving a `ng_module` using the Bazel TypeScript `devserver` on Windows.
PR Close#27839
The existing example makes it seem like zip is a pipeable operator. It can be used this way, but I think that is for backwards compatibility. You can achieve the same functionality by using it as an Observable creator. I think this also makes the example clearer.
PR Close#26790
@alxhub spotted that the public api rule in codeowners is being overriden by the Build & CI Owners rule.
swapping the two sections fixes the problem.
PR Close#27999
On push builds, CircleCI provides `CIRCLE_COMPARE_URL`, which we use to
extract the commit range for a given build. When a workflow is rerun
(e.g. to recover from a flaked job), `CIRCLE_COMPARE_URL` is not
defined, causing some jobs to fail.
This commit fixes it by retrieving the compare URL from the original
workflow. It uses a slow process involving a (potentially large) number
of requests to CircleCI API.
It depends on the (undocumented) fact, that the `workspace_id` is the
same on all rerun workflows and the same as the original `workflow_id`.
PR Close#27775
* Groups the two sharded `test_docs_examples` job using CircleCI's `parallelism` feature. This makes the amount of jobs that show up on a PR, more reduced and also reduces code duplication for maintaining the Circle job definition.
PR Close#27937
I'm not sure why this problem is visible only now or how this worked before, but the CI
is now failing because @types/node is missing.
I also added the yarn.lock file which was previously omitted. We want the yarn.lock file in so that
our deps don't change over time without us knowing.
PR Close#27937
test.sh is no longer needed... all the tests should now be executed via bazel.
if for whatever reason we need to run the legacy unit test setup, we should should follow the commands that we use to execute those tests in .circle/config.yaml
PR Close#27937
Moving the tests over to CircleCI in pretty much "as-is" state just so that we can drop the dependency on Travis.
In the followup changes we plan to migrate these tests to run on sauce under bazel. @gregmagolan is working on that.
I've previously verified that all the tests executed in legacy-unit-tests-local already under bazel.
Therefore the legacy-unit-tests-local job is strictly not necessary any more, but given how flaky legacy-unit-tests-saucelabs is,
it is good to have the -local job just so that we can quickly determine if any failure is a flake or legit issue
(the bazel version of these tests could theoretically run in a slightly different way and fail or not fail in a different way, so having -lcoal job is just an extra safety check).
This change was coauthored with @devversion
PR Close#27937
* Currently the protractor utils assume that the specified Bazel server runfile can be resolved by just using the real file system. This is not the case on Windows because the runfiles are not symlinked into the working directory and need to be resolved through the runfile manifest.
PR Close#27915
Currently when building a package on Windows, the typings re-export for secondary entry-points is not valid TypeScript. Similarly the metadata and the "package.json" files use non-posix paths and cause inconsistency within the NPM package.
For example:
_package.json_
```
"esm5": "./esm5\\core.js",
"esm2015": "./esm2015\\core.js",
```
_testing.d.t.s_ (of the `core` package)
```
export * from './testing\testing';
```
PR Close#27829
I’ve observed that Brandon reviews many docs-only PRs and then we still need me or Jeniffer to approve them.
In most cases, Brandon is perfectly qualified to approve these, so I’m proposing that Brandon is added to the framework-global-approvers-for-docs-only-changes group.
PR Close#27949
We missed removing the `fixme-ivy-aot` bazel tag from the BUILD file
of platform-browser-dynamic, so we weren't running the
`//packages/platform-browser-dynamic/test:test_web_chromium-local`
test target on CI. This commit turns on the tests and adds root causes
where they are known.
PR Close#27940
Summary of changes:
- created .github/CODEOWNERS with docs and config similar to the one in .pullapprove.yml
- updated docs
- updated .github/angular-robot.yml to not expect pullapprove status
- removed .pullapprove.yml
The primary motivations behind this change are:
- CODEOWNERS didn't exist when we introduced pullapprove
- CODEOWNERS is a functionality tightly integrated with github which results in better DX
- pullapprove v2 has been very unstable recently causing productivity loss
- pullapprove v2 has been deprecated in favor of v3, which requires and migration
PR Close#27690
Previously, there could be identical template/listener function names
for a component's template, if it had multiple similarly structured
nested sub-templates or listeners.
This resulted in build errors:
`Identifier '<SOME_IDENTIFIER>' has already been declared`
This commit fixes this by ensuring that the template index is included
in the `contextName` passed to the `TemplateDefinitionBuilder`
responsible for processing nested sub-templates.
Similarly, the template or element index is included in the listener
names.
PR Close#27766
This PR assures that content projection works if an <ng-content> tag is
placed inside an <ng-template> in one component and that <ng-template>
is inserted into a different component. It fixes a bug where the
projection instruction code would walk up the insertion tree to find
selector data instead of the declaration tree.
PR Close#27783
Prior to this change, ICU extraction logic was not taking into account nested bindings (that look like this: �0:1�) and only accounted for top level bindings (like this �0�). As a result, ICUs were not parsed and remained as text in the output. Now the extraction logic (regular expressions) take into account the nested bindings format as well.
PR Close#27914
The build and test progress logs make the CI log output so long that it
can't be displayed in the UI and one has to download and view the file
locally instead. This makes it harder to get to the interesting lines,
such as error messages.
Similar to #26869, but for the `bazel-schematics` integration project.
PR Close#27934
the polymer benchmarks are super old and not relevant any more
and these benchmarks were the only reason why we needed bower at all
so long, bower. thanks for all the fish.
PR Close#27931
Internally getError and hasError call the AbstractControl#get method which takes `path: Array<string | number> | string` as input, since there are different ways to traverse the AbstractControl tree.
This change matches the method signitures of all methods that use this.
PR Close#20211
Some of the animation tests have been failing because animation gets
triggered multiple times. The reason for this is that the compiler was
generating static attribute bindings in addition to dynamic bindings.
This created multiple writes to the animation render which failed the
tests.
PR Close#27805
This new version of dgeni-packages gives the main (implemented)
overload of a method the correct id and aliases, which allow it to be
automatically linked.
See 398f35da30Fixes#27820Closes#27821
PR Close#27864
Due to an incorrect environment variable name, it's currently not possible to launch Protractor on Windows using the Bazel protractor rule.
PR Close#27850
Forward refs in some places (like imports/export/providers/viewProviders/queries) were not resolved before passing to compilation phase. Now we resolve missing refs before invoking compile function.
PR Close#27737
Updates the app itself to reflect the result of using the `experimentalIvy` flag on the CLI.
The result is similar to:
npx @angular/cli@next new cli-hello-world-ivy --experimental-ivy --defaults
But replaces the current (cli `7.2.0-rc.0`) `renderComponent` bootstrap with the usual `platformBrowserDynamic` one.
It also keeps what the app did (display a pipe, tests it).
PR Close#27797
Updates to the latest Karma version that includes karma-runner/karma@cc2eff2 and should be able to properly restart disconnected browsers. This was a long-term Karma bug and affected CI flakiness significantly.
PR Close#27735
Prior to this change, provider overrides defined via TestBed.overrideProvider were not applied to Components/Directives. Now providers are taken into account while compiling Components/Directives (metadata is updated accordingly before being passed to compilation).
PR Close#27693
In some cases in our tests we can define multiple overrides for a given class. As a result, only the last override is actually applied due to the fact that we store overrides in a Type<->Override map. This update changes the logic to keep all overrides defined in a given test for a Type (i.e. Type<->Override[] map) and applies them one by one at resolution phase. This behavior is more inline with the previous TestBed.
PR Close#27734
This commit adds tests that verify the current behavior wrt injector
tree traversal for downgraded components, so that it is easier to
contrast with changed behavior is future commits (should we decide
to actually change it).
PR Close#27217
Previously, nested downgraded components would not be created/destroyed
inside the Angular zone (as they should) and they would not be wired up
correctly for change detection.
This commit ensures that ngUpgrade correctly detects whether this is an
ngUpgradeLite app (i.e. one using `downgradeModule()` instead of
`UpgradeModule`) and appropriately handles components, even if they are
nested inside other downgraded components.
Fixes#22581Closes#22869Closes#27083
PR Close#27217
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27523
Previously ivy code generation was emmiting the projectionDef instruction in
a template where the <ng-content> tag was found. This code generation logic was
incorrect since the ivy runtime expects the projectionDef instruction to be present
in the main template only.
This PR ammends the code generation logic so that the projectionDef instruction is
emmitedin the main template only.
PR Close#27755
Normally functions that return `ModuleWithProvider` objects should parameterize
the return type to include the type of `NgModule` that is being returned. For
example `forRoot(): ModuleWithProviders<RouterModule>`.
But in some cases, especially those generated by nccc, these functions to not
explicitly declare `ModuleWithProviders` as their return type. Instead they
return a "intersection" type, one of whose members is a type literal that
declares the `NgModule` type returned. For example:
`forRoot(): CustomType&{ngModule:RouterModule}`.
This commit changes the `NgModuleDecoratorHandler` so that it can extract
the `NgModule` type from either kind of declaration.
PR Close#27326
Exported functions or static method that return a `ModuleWithProviders`
compatible structure need to provide information about the referenced
`NgModule` type in their return type.
This allows ngtsc to be able to understand the type of `NgModule` that is
being returned from calls to the function, without having to dig into the
internals of the compiled library.
There are two ways to provide this information:
* Add a type parameter to the `ModuleWithProviders` return type. E.g.
```
static forRoot(): ModuleWithProviders<SomeNgModule>;
```
* Convert the return type to a union that includes a literal type. E.g.
```
static forRoot(): (SomeOtherType)&{ngModule:SomeNgModule};
```
This commit updates the rendering of typings files to include this type
information on all matching functions/methods.
PR Close#27326
To support updating `ModuleWithProviders` calls,
we need to be able to map exported functions between
source and typings files, as well as classes.
PR Close#27326
This reverts commit d766ad01db.
As discussed per chat, we want to temporarily revert that change because `gulp-clang-format` expects a more recent version of `clang-format` which comes with new style updates. In order to make sure that the formatting will be enforced in the meanwhile, we need to revert the update.
PR Close#27759
Prior to this commit, we had two different modes for change detection
execution for Ivy, depending on whether you called `bootstrap()` or
`renderComponent()`. In the former case, we would complete creation
mode for all components in the tree before beginning update mode for
any component. In the latter case, we would run creation mode and
update mode together for each component individually.
Maintaining code to support these two different execution orders was
unnecessarily complex, so this commit aligns the two bootstrapping
mechanisms to execute in the same order. Now creation mode always
runs for all components before update mode begins.
This change also simplifies our rendering logic so that we use
`LView` flags as the source of truth for rendering mode instead of
`rf` function arguments. This fixed some related bugs (e.g. calling
`ViewRef.detectChanges` synchronously after the view's creation
would create view nodes twice, view queries would execute twice, etc).
PR Close#27744
This option means guards and resolvers will ignore changes when a provided predicate function returns `false`. This supports use cases where an application needs to ignore some param updates but not others. For example, changing a sort param in the URL might need to be ignored, whereas changing the a `project` param might require re-run of guards and resolvers.
Related to #26861#18253#27464
PR Close#27682
We need to do this because we don't yet have a released version of angular
with typescript 3.2 support and on CI we test both against the snapshot and
whatever is in aio/yarn.lock.
Once we have the next rc or a stable relase we should be able to remove
this flag.
PS: I also removed the preserveWhitespace:false because that's the default now.
PR Close#27536
cli is not yet officially compatible with typescript 3.2, so we need to disable the version check via:
ng config cli.warnings.typescriptMismatch false
PR Close#27536
It's unclear why `import as` results in the aliases to be undefined.
Plain tsc seems to do the right thing and emits the correct code, so it
might be some kind of interaction in @angular/cli or webpack that are
causing the failure.
This should be investigated separately from the tsc update in
angular/angular. See angular/angular-cli#13212
PR Close#27536
Typescript 3.2 introduced BigInt type, and consequently the
implementation for checkExpressionWorker() in checkers.ts is refactored.
For NumberLiteral and StringLiteral types, 'text' filed must be present
in the Node type, therefore they must be LiteralLikeNode instead of
Node.
PR Close#27536
What was there didn't work at all, and resulted in an error `Error processing "attach": Error: Both localRoot and remoteRoot must be specified`
PR Close#27733
* We should try loading Angular.JS for the upgrade tests in their minfied output. There seems to be a lot flakiness in regards to loading `AngularJS` within Travis, and the `onerror` messages aren't really too helpful. In order to reduce the payload that will be passed through the Saucelabs tunnel, we should try to load the minfied output files.
PR Close#27711
Currently rnning the gulp tasks to format code does not work because the `through2` version used by `gulp-clang-format` is very outdated and seems to cause exceptions like:
```
Error: no writecb in Transform class
at afterTransform (C:\Users\Paul\projects\angular\node_modules\gulp-clang-format\node_modules\readable-stream\lib\_stream_transform.js:95:33)
at TransformState.afterTransform (C:\Users\Paul\projects\angular\node_modules\gulp-clang-format\node_modules\readable-stream\lib\_stream_transform.js:79:12)
```
Updating to the latest version of `gulp-clang-format` that comes with 10cbb7f9bf, seems to fix this.
**Note**: This issue seems to depend on the platform because I didn't run into it on MacOS, or Linux. Though I got the failure on Windows. I didn't spend time investigating, but updating to the latest
version should just improve things.
PR Close#27712
This commit fixes a bug whereby the path of the entry_module is not
consistent with the workspace name, which does not permit dashes
in the name.
PR Close#27719
It looks like `fixmeIvy` imports were accidentally removed from Router integration tests, thus causing build errors. The necessary imports are now restored and the project should build normally.
PR Close#27720
We invoked `hostBindings` function in Create and Update modes with different element index due to the fact that we did not subtract HEADER_OFFSET from the index before passing it to `hostBindings` function in Create mode. Now we subtract HEADER_OFFSET value before invoking `hostBindings`, which makes Ceate and Update calls consistent.
PR Close#27694
Context discovery was only available on elements. This PR adds support for containers and ICU expressions.
FW-378 #resolve
FW-665 #comment linker integration tests
PR Close#27644
Currently whenever the upgrade test helper fails to load a given AngularJS version, the error that will be rejected is technically not an error because the `onerror` callback is not returning an error, but an "ErrorEvent".
Since that `ErrorEvent` is basically just rejected, browsers will print
the error as followed:
```
Failed: [object Event]
```
This is not helpful at all and also implies that there _might_ be more
information hidden within the `Event` instance. Unfortunately that's not
the case (at least on browsers we test against) and the logic to extract
the data from the event would be not worth the effort, we just return a
simple custom `Error` that won't imply that there is more information
hidden.
PR Close#27706
Relative imports in Typescript files only work when module_name is
defined in ts_library (when run in Node.js).
See issue https://github.com/bazelbuild/rules_typescript/issues/360
With that fixed, `ng test` now works.
`ng build` requires `node_modules` to be available in the project
directory, so it's not usable yet. Running `yarn` in project directory
does not work because of postinstall version check.
PR Close#27715
In ngUpgrade (dynamic) we create a dynamic Angular `Directive` that wraps AngularJS components
that are being upgraded. The constructor of this `Directive` class returns a different instance
than `this`. It is this instance that actually contains the life-cycle hook handlers.
This would break in ivy, since the methods on the prototype of the original class are wired up,
rather than the instance methods. This results in hooks like `ngOnInit` not being called.
This commit refactors the code to extend the inner class that was being returned so that the
prototype chain is correct for both ViewEngine and ivy.
This change resolves a number of failing ivy tests, but also exposes other failures that were
masked by this issue. The tests have been updated accordingly.
(FW-812)
PR Close#27660
`NgModule` requires that `Component`s/`Directive`s/`Pipe`s are listed in
declarations, and that each `Component`s/`Directive`s/`Pipe` is declared
in exactly one `NgModule`. This change adds runtime checks to ensure
that these sementics are true at runtime.
There will need to be seperate set of checks for the AoT path of the
codebase to verify that same set of semantics hold. Due to current
design there does not seem to be an easy way to share the two checks
because JIT deal with references where as AoT deals with AST nodes.
PR Close#27604
With the bundle info being assembled into a single object before the
transform is started, we now greedily create a TypeScript program up-front.
If a marker file exists that indicates that the bundle could be skipped
the program creation has already taken place which takes a significant
amount of time. This commit moves the marker check to occur before the
bundle is assembled.
PR Close#27438
ngcc would feed ngtsc with the function declaration inside of an IIFE as
that is considered the class symbol's declaration node, according to
TypeScript's `ts.Symbol.valueDeclaration`. ngtsc however only considered
variable decls and actual class decls as potential class declarations,
so given the function declaration node it would fail to generate the
`setClassMetadata` call.
ngtsc no longer makes its own assumptions about what classes look like,
but always asks the reflection host to yield this kind of information.
PR Close#27438
While creating FESM files, rollup usually drops all unused symbols.
All *__POST_R3__ are unused unless ngcc rewires stuff. To prevent this DCE
we reexport them as private symbols. If ngcc is not used, these symbols will
be dropped when we optimize an application bundle.
PR Close#27438
Prior to this change, we were unable to match directives using `ng-template` tags (for example the following selector would not work even though there might be some <ng-template>s in a template: `ng-template[directiveA]`. As a result, that broke some components that relies on such selectors to work. In order to resolve the problem, we now pass tag name to the `template` instruction (where we passed `null` before) and this tag name is used for matching at runtime. This update should also help support projecting containers, because the tag name is required to properly match such elements.
PR Close#27636
A surprising interaction with the MagicString library caused inserted
Ivy definitions to be dropped during the removal of decorators, iff all
decorators on the class could be removed. In that case, the removal
location corresponds with the exact location where Ivy definitions were
inserted into.
This commit moves the removal of decorators to occur before Ivy
definitions are inserted. This effectively avoids the problem, as later
inserted text fragments will be retained by MagicString.
PR Close#27159
All the tests in `packages/core/test/view/` are specific to the `ViewEngine` and shouldn't run for ivy. This PR introduces a new BUILD.bazel file to run those tests separately.
PR Close#27645
If a template contains specific TypeScript syntax, such as a non-null
assertion, the code that is emitted from ngcc into a JavaScript bundle
should not retain such syntax as it is invalid in JS.
A full-blown TypeScript emit of a complete ts.SourceFile would be
required to be able to emit JS and possibly downlevel into a lower
language target, which is not an option for ngcc as it currently
operates on partial ASTs, not full source files.
Instead, ngtsc no longer produces TypeScript specific syntax in the first
place, such that TypeScript print logic will only generate JS code.
PR Close#27051
The default 10 items are often not enough to debug deeply nested compilation operations.
This PR is based on @martinprobst's http://cl/225528216.
PR Close#27678
In Ivy, a pure call to `setClassMetadata` is inserted to retain the
information that would otherwise be lost while eliding the Angular
decorators. In the past, the Angular constructor decorators were
wrapped inside of an anonymous function which was only evaluated once
`ReflectionCapabilities` was requested for such metadata. This approach
prevents forward references from inside the constructor parameter
decorators from being evaluated before they are available.
In the `setClassMetadata` call, the constructor parameters were not wrapped
within an anonymous function, such that forward references were evaluated
too early, causing runtime errors.
This commit changes the `setClassMetadata` call to pass the constructor
parameter decorators inside of an anonymous function again, such that
forward references are not resolved until requested by
`ReflectionCapabilities`, therefore avoiding the early reads of forward refs.
PR Close#27561
With ngcc's ability to fixup pre-Ivy ModuleWithProviders such that they
include a reference to the NgModule type, the type may become a qualified
name:
```
import {ModuleWithProviders} from '@angular/core';
import * as ngcc0 from './module';
export declare provide(): ModuleWithProviders<ngcc0.Module>;
```
ngtsc now takes this situation into account when reflecting a
ModuleWithProvider's type argument.
PR Close#27562
Currently the `ViewRef.destroy` method assumes that its index inside the view container will always be valid, however if it has been removed already, it'll be -1 which will throw an error.
The error manifested itself in one of the unit tests where a view had been detached during the test and then `TestBed` attempted to destroy its `ComponentRef` which ended threw an `Error during cleanup of component`.
PR Close#27585
Previously the logging to TravisCI has been disabled because the `print-logs.sh` file printed the Sauce-Connect logfile output that is `verbose` by default. See [for example](https://travis-ci.org/angular/angular/jobs/250578973).
Since the default stdout/stderr of sauce-connect is pretty much concise and can alert us if we run into any issues (e.g. rate limit, outdated tunnel version), we should stop piping these to `/dev/null`.
PR Close#27657
* Disables the failing optional Travis jobs because those just acquire limited resources of Saucelabs and BrowserStack and cause API rate limit problems if the caretaker merges multiple PRs. The rate limit error will spread across multiple repositories because we use the same license in multiple Angular projects (e.g. Angular Material, angular.js etc.)
PR Close#27657
Navigating to a route such as `/users`, you may get redirected to `/login`. Previously, if you go then route to `/users` again the URL will end up showing `/users` after the second redirect. This only happened in `UrlUpdateStrategy="eager"`. This is now fixed so after the second redirect, the URL shows the correct page.
Fixes#27116
PR Close#27523
Closure Compiler doesn't allow non-goo.getMsg const names to start with `MSG_`, so we should use different prefix for const that references a result of the `i18nPostprocess` fn invocation. With this update we also append file-based prefix to i18n constants (via $$ postfix) to ensure the names are unique across codebase of a project (otherwise it might lead to errors while compiling a project with Closure Compiler).
PR Close#27468
In order to keep the bazel bin directory as clean as possible, we should not write definition files that are not relevant to a `ng_package` to an undesired location in the bazel bin directory. This currently just happens because we only filter out external definition files while we also should filter out definitions that aren't just in the current package.
The `packager.ts` file currently tries to write these files to the package, but fails because those are not inside of the current package. So the logic to create a relative path for the file fails, and the definition will be copied to a location like:
```js
// Notice the double "bazel-out" here.
C:\Users\Paul\_bazel_Paul\kn4tsvyh\execroot\angular_material\bazel-out\x64_windows-fastbuild\bin\src\bazel-out\x64_windows-fastbuild\bin\src\cdk
```
[See logic that causes this](4f9374951d/packages/bazel/src/ng_package/packager.ts (L105-L124)) (nothing wrong with that logic because it assumes that only paths from within the package are passed to it)
PR Close#27519
ngtsc now produces flat module index files when that option is enabled
in tsconfig, but Bazel still needs the output declared in order for them to
be passed through.
This fixes some tests which verify this behavior on Bazel.
FW-738 #resolve
PR Close#27655
* Suppresses the warning from the Bazel TypeScript rules about overwritten options from the `tools/tsconfig.json` file. This is the only remaining warning that makes our Bazel build on Angular Material "dirty"
PR Close#27583
the clickable region of the top menu item is expanded beyond the focused area, so the clickable area is spans the entire height of the navigation
fixes#27618
PR Close#27633
We are overincluding files, all of these are not necessary in google3 and should not be synced
because it's only slowing us down.
Related CL: http://cl/225197013
PR Close#27653
Since Renderer is shared across root and child views, we need to avoid `destroy` method invocation for child views and only invoke is for root view when needed. Prior to this change, the `destroy` function was called whenever child view was destroyed, thus causing errors at runtime.
PR Close#27592
the clickable region of the top menu item is reduced to the focused area, so no cursor pointer is shown outside the clickable area
fixes#27618
PR Close#27620
When we launched the new issue templates (.github/ISSUE_TEMPLATE/*), we forgot to update these
docs which got stale and needed a refresh.
PR Close#27608
The pure functions in host bindings change was merged after the change in
host binding instructions, so it had a new test that wasn't yet updated
with the new generated code. This commit updates the new test.
PR Close#27605
Previously in Ivy, host bindings did not work if they shared a public name
with an Input because they used the `elementProperty` instruction as is.
This instruction was originally built for inside component templates, so it
would either set a directive input OR a native property. This is the
correct behavior for inside a template, but for host bindings, we always
want the native properties to be set regardless of the presence of an Input.
This change adds an extra argument to `elementProperty` so we can tell it to
ignore directive inputs and only set native properties (if it is in the
context of a host binding).
PR Close#27589
Prior to this update, we always returned the number of host vars defined in @Component definition as a value for `allocatePureFunctionsSlot` callback in ValueConverter. As a result, pure function arguments were not accounted for, thus leasing to incorrect slot offsets in `pureFunction` calls. Now we update and return total # of host vars, so the offsets are defined correctly.
PR Close#27587
there is still too much churn to make this info useful in the release notes, advanced
developers can use git log to find out what's going on with ivy.
PR Close#27532
When @angular/bazel is installed, a postinstall script is run to make sure that
the npm version is *exactly* the same as the Angular repository install by
Bazel. This check is overly stringent. Instead, it should enforce that the
version satisfies the range check instead. This is consistent with the range
defined in angular-cli/packages/schematics/angular/utility/latest-versions.ts.
This commit also fixes the Bazel workspace to use the same Rxjs version if it's
already installed.
PR Close#27526
This release of rules_typescript fixes a critical bug: typescript code
was not checked at all, including type-checking, tsetse, and strict deps
fixes#27569
PR Close#27586
In `ViewRef.detectChanges`, we are passing `ViewRef.context` into `detectChanges` to trigger change detection. This only makes sense for component `ViewRefs` (i.e. injected `ChangeDetectorRefs`) because with embedded views, `context` is not a component instance where the view has been monkey-patched. It's a just a normal object, so the view will be undefined.
In order to resolve this problem, we now invoke `detectChangesInternal` and also pass `LView` (to make sure we always have a view available).
PR Close#27521
We had two `NodeInjector` classes: one in `view_compatibility` and one in `di`. We replaced the one in `di` with the one from `view_compatibility` and reconciled their differences.
PR Close#27541
Removes the following when bazel runs any of our jasmine_node_tests:
(node:85494) [DEP0005] DeprecationWarning: Buffer() is deprecated due to security and usability issues. Please use the Buffer.alloc(), Buffer.allocUnsafe(), or Buffer.from()
methods instead.
I was able to find the source of the warning by running the target with the following tags:
```
bazel test packages/language-service/... --test_arg=--node_options=--throw-deprecation
```
PR Close#27538
`@angular/bazel` currently requires TypeScript 3.1.x as a peer dependency, but comes with `tsickle` as dependency. The current version of `tsickle` that is specified by `@angular/bazel` does not support TypeScript 3.1.x (which is a peer dependency) and therefore we need to make sure that `tsickle` works with the required TypeScript versions.
This change updates `tsickle` to the latest version that comes with b10fb6de0a in order to work with TypeScript 3.1.x.
PR Close#27402
The submission guidelines for submitting an issue directs issue reporters to a pre-filled unformatted issue form. Reporters need directed to choose from the issue templates.
Fixes#27398
PR Close#27400
Switch from Skylint to buildifier --lint - this is required for the Bazel 0.20 upgrade since Bazel no longer lets us use the embedded JDK to build and run Java programs, and Skylint is a Java program
PR Close#27489
Prior to this change, animation event names were treated as a regular event names, stripping `@` symbol and event phase. As a result, event listeners were not invoked during animations. Now animation event name is formatted as needed and the necessary callbacks are invoked.
PR Close#27525
Previously, ngtsc did not respect the angularCompilerOptions settings
for generating flat module indices. This commit adds a
FlatIndexGenerator which is used to implement those options.
FW-738 #resolve
PR Close#27497
Previously the ngtsc ShimGenerator interface expected that all shims would
be generated using the contents of existing ts.SourceFiles. This assumption
was true for ngfactory and ngsummary files, but breaks down for flat module
index files, which are standalone.
This commit prepares for flat module index generation by enabling shim
generators which don't require an existing file.
PR Close#27497
While generating attributes for `projection` instruction, we checked whether attribute name is equal to 'select' in lower case. However in other cases we treat 'select' attribute name as case-insensitive. This PR makes 'select' attribute consistently case-insensitive.
PR Close#27500
Prior to this change, animation properties were defined as element attributes, which caused errors at runtime. Now all animation-related attributes are defined as element properties.
Also as a part of this update, we start to account for bindings used in animations, which was previously missing.
PR Close#27496
If user has already installed Angular, Bazel should fetch the same
version. Otherwise, user will see an error in the post-install step
that performs version check.
PR Close#27495
Analogously to directives, the `ngInjectableDef` field in .d.ts files is
annotated with the type of service that it represents. If the service
contains required generic type arguments, these must be included in
the .d.ts file.
PR Close#27037
This PR introduces:
1. Google Cloud Store bucket which contains build artifacts
2. Documentation on how to enable remote caching in development
Each team member should download a service key. More convenient ways of authentication would be more obscure and prevent us from doing identity tracking of the produced artifacts.
PR Close#27358
Common insensitive platforms are `win32/win64` (see:
[here](3e4c5c95ab/src/compiler/sys.ts (L681-L682)))
Currently when running `bazel build packages/core --define=compile=aot`, the `compiler-cli` will throw because it cannot find the `index.ngfactory.ts` file in the compiler host. This is because the shim host wrapper is not properly generating the requested `ngfactory` file.
This happens because we call `getCanonicalFileName` that returns a path that is different to the actual program filenames that are used to construct a map of generated files. Since the generators always use the paths which are not "canonical" and pases them internally like that, we can just stop manually calling `getCanonicalFileName`.
PR Close#27466
Some "platform-browser" tests were updated before `fixmeIvy` function contract was changed to `fixmeIvy(...).it(...)`, thus triggering failed tests to run on CI. This commit updates these cases to invoke `fixmeIvy` correctly.
PR Close#27498
This commit enables the above test to run under --define=compile=aot.
To accomplish this, one import is rewritten from a strange form to the
correct absolute form.
FW-658 #resolve
PR Close#27483
Previously, Bazel/Blaze were only expecting .ngfactory.js and .ngsummary.js
files to be generated in legacy mode. ngtsc was attempting to write those
files, but they ended up being ignored at the Bazel level.
This commit causes Bazel to expect these files, and rearranges the logic
a little bit as the name 'include_ng_files' is now incorrect.
FW-514 FW-737 #resolve
PR Close#27483
ngfactory files have a ɵNonEmptyModule constant included if there are no
other exported factory symbols. Previously this extra export was added
dynamically in a TS transformer.
However, synthetically constructed exports don't get properly downleveled
during JS emit, and this generated constant caused issues with downstream
tests.
Instead, this commit configures the shim to always have this export to
begin with, and to filter it out if it's not required.
Testing strategy: covered by existing ngtsc_spec tests which verify the
presence of the ɵNonEmptyModule symbol.
PR Close#27483
In ngtsc, files loaded into the ts.Program have a "module name", set via
ts.SourceFile.moduleName, which ends up being written into an AMD module
name triple-slash directive in the generated .js file.
For generated shim files (ngfactories, ngsummaries) that are constructed
synthetically, there was previously no moduleName set, which caused some
issues with downstream tests.
This commit adds logic to compute and set moduleNames for both generated
ngfactory and ngsummary shims.
PR Close#27483
A previous fix to ngtsc opened the door for duplicate directives in
the 'directives' array of a component. This would happen if the directive
was declared in a module which was imported more than once within the
component's module.
This commit adds deduplication when the component's scope is materialized,
so declarations which arrive via more than one module import are coalesced.
PR Close#27462
The `FETCH_ERROR` document is used when we are unable to retrieve a
document (except for 404 errors), which includes when there is no
internet connection. Using the `<current-location>` element in the
document's template to show the path of the page we failed to retrieve
assumes that the element's bundle is available (e.g. cached by the SW)
or can be fetched from the server.
When none of these conditions is met, the `DocViewer` is unable to
prepare the document and fails, never showing the `FETCH_ERROR` page to
the user.
Furthermore, the path we are looking to retrieve via
`<current-location>` is essentially the document ID, which we already
have. Thus, loading and instantiating a whole component just for that is
overkill.
This commit addresses both issues by getting rid of the
`<current-location>` component and directly embedding the document ID
into the `FETCH_ERROR` content.
PR Close#27250
When using relative paths for CSS resources (such as background images),
`@angular/cli` will move them to the root `dist/` directory (and update
the paths in CSS accordingly). This results in the SW being unable to
cache the resource, because it is not where it expects it to be.
This commit fixes this issue for the footer background image, by using
an absolute path for the URL. (It also removes an unused style that
would have been affected by the same issue.)
PR Close#27250
In order for 'Material Icons' to work offline, their `.woff2` file needs
to have been cached by the SW. This file is not requested by the
browser, until an element needs to use the icon font.
In order to speed up the initial page load and avoid FOUC, we use
inlined SVGs for all icons in the app shell. As a result, the `.woff2`
file may not be requested, when a user visits angular.io. If they go
offline before visiting a page that does actually use 'Material Icons',
then such icons will not work correctly (e.g. the `error_outline` icon
used in the error page for failed requests due to network
unanvailability).
This commit fixes this, by adding a non-visible element that needs the
'Material Icons' font on the main component. Thids ensures that the
`.woff2` file will always be loaded, even if the page does not use any
material icons.
(Note: The element is inserted lazily to avoid affecting the initial
rendering.)
PR Close#27250
These icons are part of the app shell and used on every load (on both
desktop and mobile). Inlining them ensures they are rendered asap.
PR Close#27250
Previously, we did not load the Roboto font, instead relying on the user
to have it available on their system and falling back to different fonts
otherwise. This resulted in the page being styled slightly differently
for those people that didn't have the font installed locally.
PR Close#27250
This commit allows //packages/bazel/test/ngc-wrapped/... tests to run
under Ivy mode. To get them to pass, it addresses a problem with the
way the tests are configured: both test targets have sloppy .d.ts
dependencies configured, leading to many type errors being generated
in TypeScript for the .d.ts files.
Due to the way ngc directs TypeScript emit, it avoids type-checking
.d.ts files and thus this issue does not surface. ngtsc does a whole-
program emit which results in full .d.ts type-checking by default,
catching this configuration issue.
To fix this, skipLibCheck is added to the tsconfig.jsons for these
tests, which tells TypeScript to skip type-checking of the .d.ts files,
avoiding this problem in a similar way to ngc.
PR Close#27470
The method `ts.CompilerHost.directoryExists` is optional, and was not
previously handled by our ts.CompilerHost wrapper for factory and
summary shims (GeneratedShimsHostWrapper).
TypeScript checks for the existence of this method and silently ignores
things like typeRoots if it's not found. This commit adds proper handling
of directoryExists() to the shim.
A test is also added which verifies typeRoots behavior works when shims
are enabled.
PR Close#27470
Previously the ngfactory shim generator in ngtsc would always write two
imports in the factory file shims:
1) an import to @angular/core
2) an import to the base file
If the base file has no exports, import #2 would be empty. This turns out
to cause issues downstream.
This commit changes the generated shim so if there are no exports in the
base file, the generated shim is empty too.
PR Close#27470
This option means guards and resolvers will ignore changes to matrix parameters. Guards and resolvers will be rerun when the path changes, when path parameters change, or when query parameters change.
The primary use case for such a mode is when updating the UI and getting the URL to be in sync with local changes. For example, if displaying a sortable table, changing the sort direction is often handled by the table itself. But you would want to update the URL to be in sync with what's being displayed to the user. As long as the table sort direction is stored as a matrix parameter, you can use this option to update the URL without causing the overhead of re-running guards and resolvers.
Related to #26861#18253
PR Close#27464
PR #27404 introduced additional test case to make sure we generate `elementStyling` instructions with proper set of arguments (first argument was missing in some cases). It looks like that PR was created before we updated host vars count calculation and the `allocHostVars` becomes unnecessary in the test cases introduced in PR #27404. This commit actualizes this test to get rid of unnecessary `allocHostVars` instruction.
PR Close#27473
(FW-777)
When an Injector is provided, R3Injector instantiates it by calling its
constructor instead of its factory, not resolving dependencies.
With this fix, the ngInjectorDef is checked and the factory is correctly
used if it is found.
PR Close#27456
Previously, if the two injectors are not the same, jasmine tried to
display an error message, but it got stuck in an infinite loop trying
to render the injectors that were different.
PR Close#27454
When detaching a view by its index via `ViewContainerRef.detach(index)`, in `ViewEngine` we used to return a new `ViewRef` ([for reference](https://github.com/angular/angular/blob/master/packages/core/src/view/refs.ts#L227)), however in Ivy we return the same `ViewRef` which means that its internal `_viewContainerRef` is never reset and we'll throw an error if the consumer tried to attach it to the `ApplicationRef`. These changes return a new `ViewRef` in order to match the original behavior.
These changes also add the same errors as `ViewEngine` when attempting to attach a view that is attached already. This was the original goal of this PR, however it ended up uncovering the issues with the `ViewRef`.
PR Close#27437
This can help with debugging issues, e.g. with the communication between
the preview server and CI, as it gives a better idea of exactly when was
the preview made available and how long it took.
PR Close#27436
The logic that generates first argument for the `elementStyling` instruction was missing the check that directive expression is specified. As a result, in some cases first argument was not added, thus making function invocation incorrect. Now the presence of directive expression is taken into account and the `null` expression is generated as needed.
PR Close#27404
In some applications, developers define a `ts_library` that just consists of `d.ts` files (e.g. to type `module.id`; see: https://github.com/angular/material2/blob/master/src/module-typings.d.ts), and expect the `esm5.bzl` file to not throw an error like:
```
target.typescript.replay_params.outputs
struct' object has no attribute 'outputs'
```
The "replay_parameters" property will exist in that case, but is set to "None" because there is no action that should be replayed in favor of producing ES5 outputs. See: https://github.com/bazelbuild/rules_typescript/pull/326. Notice that this right now breaks similarly because an empty `struct()` is returned that does not have a property called `outputs`. [#326](https://github.com/bazelbuild/rules_typescript/pull/326) fixes that by being explicit that there is no _action_ at all.
PR Close#27401
Prior to this change `projectDef` instructions were placed to root templates only, thus the necessary information (selectors) in nested templates was missing. This update adds the logic to insert `projectDef` instructions to all templates where <ng-content> is present.
PR Close#27384
Previously ngtsc assumed resource files (templateUrl, styleUrls) would be
physically present in the file system relative to the .ts file which
referenced them. However, ngc previously resolved such references in the
context of ts.CompilerOptions.rootDirs. Material depends on this
functionality in its build.
This commit introduces resolution of resources by leveraging the TypeScript
module resolver, ts.resolveModuleName(). This resolver is used in a way
which will never succeed, but on failure will return a list of locations
checked. This list is then filtered to obtain the correct potential
locations of the resource.
PR Close#27357
This commit adds support for resolution of styleUrls to ngtsc. Previously
this field was never read, and so components with styleUrls would appear
unstyled after compilation.
PR Close#27357
When a single resource is preloaded twice in ngtsc, the second request
would be recognized as in-flight in which case `undefined` would
be returned, which signals to the compilation that is can resume
synchronously. The compilation would then proceed immediately and call
`load`, only to find out that the request is still in-flight which is
not allowed.
This commit caches the Promise of the in-flight fetch requests, such
that subsequent preload requests can return the corresponding Promise
instance.
PR Close#27357
* Currently when building a `ng_module` with Bazel and having the flat module id option set, the flat module files are not being generated because `@angular/compiler-cli` does not properly determine the entry-point file.
Note that this logic is not necessarily specific to Bazel and the same problem can happen without Bazel if multiple TypeScript input files are specified while the `flatModuleIndex` option has been enabled.
PR Close#27200
Currently when building the `ng_package` multiple times, the old `ng_package` output will be copied over to the new `ng_package` content. Resulting in packages like `src/cdk/npm_package/npm_package/npm_package/AND_MORE`.
This happens because currently all TypeScript definition files are resolved from within the `binDir`. This is just wrong because it could then take up the `d.ts` files from the previous `ng_package` output. All typescript definitions that belong to the target package, should be resolved through Bazel and copied based on that computation.
Also fixes that `esm` files aren't written to the `ng_package` on Windows. This is because we try to flatten paths using the `path.delimiter` while the path is always using Posix delimiters (causing the paths to be incorrect)
PR Close#27200
* Currently when building the ES5 and ES2015 output, `ngc_wrapped` will fail because it tries to write the `fs.openSync` the tsickle output file at the same time. This causes a runtime exception in Windows and can be fixed by just writing the externs for ES5 mode to the proper ES5 "output root".
PR Close#27200
* Fixes that `ng_package` does not work generate UMD bundles on Windows because the `esm5/` files are not written to the output directory. This is because `rootDirs` and `rootDir` are posix paths and cause invalid relative paths when mixed with Windows backslash paths.
PR Close#27200
With this change, we no longer depend on CircleCI to trigger the webhook
(which it sometimes does with considerable delay or not at all).
This has the added benefit that other jobs will not unnecessarily
trigger webhooks and spam the preview server logs. It is only the
`aio_preview` job's webhook that we care about.
Related to #27352.
PR Close#27458
For ngcc's processing of ES5 bundles, the spread syntax has been
downleveled from `[...ARRAY]` to become `ARRAY.slice()`. This commit
adds basic support for static resolution of such call.
PR Close#27158
Prior to this change, the number of host vars stored for directives with `hostBindings` in expando block was incorrect for inherited directives (in case both parent and child directive have `hostBindings` defined). Now if we identify that we already added a `hostBinding` into expando block, we just increase the corresponding number of host binding vars
PR Close#27392
Also build releases into a dedicated output_base so you can't
accidentally publish with outdated version stamp.
Bump the version of rules_nodejs so we don't need to create the
symlink_prefixes for the .publish command to work.
PR Close#27362
The problem was caused by missing `allocateBindingSlots` that led to incorrect # of vars defined for components and as a result, causing errors at runtime. Now all `bind` operation are accounted for and the number of `vars` is correct.
PR Close#27338
The problem was caused by the self-closing i18n instruction that was generated in case we have styling instructions defined for a component. As a result, that caused problems at runtime. This update adds extra check to avoid creating self-closing i18n instructions (create i18nStart and i18nEnd instructions instead) when styling instructions are present.
PR Close#27330
Ngcc will now render additional exports for classes that are referenced in
`NgModule` decorated classes, but which were not publicly exported
from an entry-point of the package.
This is important because when ngtsc compiles libraries processed by ngcc
it needs to be able to publcly access decorated classes that are referenced
by `NgModule` decorated classes in order to build templates that use these
classes.
Doing this re-exporting is not without its risks. There are chances that
the class is not exported correctly: there may already be similarly named
exports from the entry-point or the class may be being aliased. But there
is not much more we can do from the point of view of ngcc to workaround
such scenarios. Generally, packages should have been built so that this
approach works.
PR Close#26906
There are a number of variables that need to be passed around
the program, in particular to the renderers, which benefit from being
stored in well defined objects.
The new `EntryPointBundle` structure is a specific format of an entry-point
and contains the compiled `BundleProgram` objects for the source and typings,
if appropriate.
This change helps with future refactoring, where we may need to add new
properties to this object. It allows us to maintain more stable APIs between
the constituent parts of ngcc, rather than passing lots of primitive values
around throughout the program.
PR Close#26906
The `NgModuleDecoratorHandler` can now register all the references that
it finds in the `NgModule` metadata, such as `declarations`, `imports`,
`exports` etc.
This information can then be used by ngcc to work out if any of these
references are internal only and need to be manually exported from a
library's entry-point.
PR Close#26906
By inverting the relationship between `EntryPointPaths` and
`EntryPointFormat` we can have interfaces rather than types.
Thanks to @gkalpak for this idea.
PR Close#26906
If a decorated class is not publicly exported via an entry-point then the
previous approach to finding the associated typings file failed.
Now we ensure that we extract all the class declarations from the
dtsTypings program, even if they are not exported from the entry-point.
This is achieved by also parsing statements of each source file, rather
than just parsing classes that are exported from the entry-point.
Because we now look at all the files, it is possible for there to be multiple
class declarations with the same local name. In this case, only the first
declaration with a given name is added to the map; subsequent classes are
ignored.
We are most interested in classes that are publicly exported from the
entry-point, so these are added to the map first, to ensure that they are
not ignored.
PR Close#26906
In Angular, it used to be an accepted practice to use strings as dependency
injection tokens. E.g. {provide: 'test', useValue: 'provided'}. However,
the Ivy node injection system did not support this. The Ivy DI system
attempts to patch a Bloom bit index onto each type registered with it, and
this patch operation does not work for a string token.
This commit adds string token support to the bloom filter system by
reserving bit 0 for string tokens. This eliminates the need for each string
token to store its own Bloom bit, at the expense of slightly more expensive
lookups of string tokens.
PR Close#27383
Having real functions allows me to bypass individual checks, ex.:
```
export function fixmeIvy(reason: string): boolean {
return true;
}
```
This is useful for situation where I want to see if previously disabled tests
were fixed (ex. some PRs merged). In this case I don't want to run tests that
I know are not passing (obsolete / modified).
PR Close#27372
BREAKING CHANGES:
Bazel users: rules_angular_dependencies() will no longer install transitive dependencies of build_bazel_rules_nodejs and build_bazel_rules_typescript. User WORKSPACE files will now need to install rules_nodejs and rules_typescript transitive deps directly:
```
load("@build_bazel_rules_typescript//:package.bzl", "rules_typescript_dependencies")
rules_typescript_dependencies()
load("@build_bazel_rules_nodejs//:package.bzl", "rules_nodejs_dependencies")
rules_nodejs_dependencies()
```
PR Close#27264
Reported issue in #18138 is due to EasyList being selected in ABP. This commit fixes both the image at the bottom of the Dynamic Component Loader example, and the Stackblitz demo.
Fixes#18138
PR Close#27212
Previously the concept of multiple directives with the same selector was
not supported by ngtsc. This is due to the treatment of directives for a
component as a Map from selector to the directive, which is an erroneous
representation.
Now the directives for a component are stored as an array which supports
multiple directives with the same selector.
Testing strategy: a new ngtsc_spec test asserts that multiple directives
with the same selector are matched on an element.
PR Close#27298
Most of the specs in these tests are not relevant to Ivy:
//packages/compiler/test:test
//packages/compiler/test:test_web_chromium-local
However, a few test pieces of the compiler infrastructure that are used in
Ivy, and new BUILD.bazel files are created to separate them from the above
disabled targets:
//packages/compiler/test/css_parser:css_parser
//packages/compiler/test/css_parser:css_parser_web
//packages/compiler/test/expression_parser:expression_parser
//packages/compiler/test/expression_parser:expression_parser_web
//packages/compiler/test/ml_parser:ml_parser
//packages/compiler/test/ml_parser:ml_parser_web
//packages/compiler/test/selector:selector
//packages/compiler/test/selector:selector_web
PR Close#27301
These tests are not relevant to Ivy:
//packages/compiler-cli/test/diagnostics:check_types
//packages/compiler-cli/test/diagnostics:expression_diagnostics
//packages/compiler-cli/test/transformers:test
//packages/compiler-cli/test:extract_i18n
The //packages/compiler-cli/test:ngtools_api test has 2 specs, one of
which passes and the other of which depends on ngtsc supporting lazy
routes. It's now disabled with fixmeIvy().
PR Close#27301
BREAKING CHANGE:
The public API for `DebugNode` was accidentally too broad. This change removes
1. Public constructor. Since `DebugNode` is a way for Angular to communicate information
on to the developer there is no reason why the developer should ever need to
Instantiate the `DebugNode`
2. We are also removing `removeChild`, `addChild`, `insertBefore`, and `insertChildAfter`.
All of these methods are used by Angular to constructor the correct `DebugNode` tree.
There is no reason why the developer should ever be constructing a `DebugNode` tree
And these methods should have never been made public.
3. All properties have been change to `readonly` since `DebugNode` is used by Angular
to communicate to developer and there is no reason why these APIs should be writable.
While technically breaking change we don’t expect anyone to be effected by this change.
PR Close#27223
This fixes an issue where a value would hide the type.
```
export interface Foo {
someMethod(): void;
}
export const Foo: Function = ...;
```
In the above example the `Foo` constant will hide the `interface Foo` symbol.
This change properly saves the interface in addition to the type.
PR Close#27223
A recent commit (probably 2c7386c) has changed the import graph of the
DI types in core, and somehow results in the ngc compiler deciding to
re-export core DI types from application factories which tangentially
use inject(). This is not really surprising; ngc's import graph can be
very unstable.
However, this results in a re-export of InjectFlags surviving JS
compilation. InjectFlags was a const enum, akin to an interface in TS,
with no runtime repesentation. This causes a warning to be emitted by
Webpack when it sees the re-export of InjectFlags.
This commit avoids the issue by removing 'const' from the declaration
of InjectFlags, causing it to have a runtime value. This is a temporary
fix. The real fix will be for ngc to no longer write exports of const
enums.
Testing strategy: manually verified. Due to the problem only manifesting
when recompiling after a change and then running Webpack, there is no
existing framework via which this could be easily tested with an
integration test. Additionally, the potential for this issue is gone in
Ivy, so this solution is only temporarily needed.
Fixes#27251.
PR Close#27279
These paths are no longer needed / used.
I had to disable one jit mode spec because it fails now that we actually run it.
I root caused the jit test failure as missing forwardRef support. See FW-645.
PR Close#27278
Currently we store the `_appRef` when a `ViewRef` is attached, however we don't use it for anything. These changes use it to detach the view from the `ApplicationRef` when it is destroyed. These changes also fix that the `ComponentRef` doesn't remove its `ViewRef` on destroy.
PR Close#27276
Earlier versions may transitively depend on a malicious version of
`flatmap-stream` (see dominictarr/event-stream#116).
The `aio-builds-setup/` had an older version of `event-stream` (3.3.4),
which did not depend on `flatmap-stream`, but upgraded it anyway.
PR Close#27274
The way that `UpgradeAdapter` needs to be setup, you often find that
you must pass a `forwardRef` for an `NgModule.import`. Pre-ivy, this
gets resolved at runtime, but until this is implemented in ivy, we can
workaround it by resolving it in the `UpgradeAdapter` upfront.
This should be backward-compatible since by the time we actually
create the dynamic `NgModule` that has the import, the imported
class should be defined.
PR Close#27132
When ngtsc compiles @angular/core, it rewrites core imports to the
r3_symbols.ts file that exposes all internal symbols under their
external name. When creating the FESM bundle, the r3_symbols.ts file
causes the external symbol names to be rewritten to their internal name.
Under ngcc compilations of FESM bundles, the indirection of
r3_symbols.ts is no longer in place such that the external names are
retained in the bundle. Previously, the external name `ɵdefineNgModule`
was explicitly declared internally to resolve this issue, but the
recently added `setClassMetadata` was not declared as such, causing
runtime errors.
Instead of relying on the r3_symbols.ts file to perform the rewrite of
the external modules to their internal variants, the translation is
moved into the `ImportManager` during the compilation itself. This
avoids the need for providing the external name manually.
PR Close#27055
Some engineers were already on Yarn 0.10.x which was permitted by the range in our package.json#engines
However this introduced 'integrity sha512' lines into the yarn.lock files.
Then when engineers use yarn 0.9 (in particular, Bazel did this) then the lock files get tons of meaningless edits.
We could force everyone back to yarn 0.9 but this commit chooses to instead advance everyone past 0.10
PR Close#27193
Now that the Ivy switch transform uses ts.getMutableClone() to copy
statements, there's no need to set .parent pointers on the resulting
updated nodes. Doing this was causing assertion failures deep in
TypeScript in some cases.
PR Close#27170
* With ec29fd3e7b, the prefix for the `bazel` command has been removed because it threw off the Bash variables. In order to fix this while still running Bazel from the `node_modules` (keeping the bazel versions consistent), we should run Bazel without Yarn (similar to how it's done for `build-packages-dist.sh`)
PR Close#26899
Currently the Github robot is not able to measure the artifacts of the `hello_world` and `todo` bundling tests because those will be only built with the `ivy-only` rule tag. This means that the current CircleCI job that is supposed to upload the size artifacts, does not even build those bundles.
PR Close#27042
Currently the `useJit` option from `TestBed.configureCompiler` isn't supported. These changes rework the existing test suites not to pass in `useJit` when running with Ivy.
PR Close#27067
This option means guards and resolvers will ignore changes to optional
parameters such as query and matrix params. When the path or any path
params change, guards and resolvers will be run
Related to discussion in #18253
FW-560 #resolve
PR Close#26861
Make a copy of the ts.SourceFile before modifying it in the ivy_switch
transform. It's suspected that the Bazel tsc_wrapped host's SourceFile
cache has issues when the ts.SourceFiles are mutated.
PR Close#27032
In a more specific scenario: Considering people use a custom TypeScript compiler host with `NGC`, they _could_ expect only posix paths in methods like `writeFile`. This at first glance sounds like a trivial issue that should be just fixed by the actual compiler host, but usually TypeScript internal API's just pass around posix normalized paths, and therefore it would be good to follow the same standards when passing JSON genfiles to the `CompilerHost`.
For normal TypeScript files (and TS genfiles), this is already consistent because those will be handled by the actual TypeScript `Program` (see `emitCallback`).
PR Close#27062
At the moment, `path.posix.relative` will break paths in windows as it will return something like
```
Error: Source file "../C:/users/alag/_bazel_alag/3tbqurya/execroot/angular/bazel-out/x64_windows-fastbuild/bin/packages/core/core.d.ts" not found
```
PR Close#26888
Adds support for the `providers` that are passed in through `TestBed.configureCompiler` and scopes the error only if the consumer has passed in `useJit`.
PR Close#27066
This fixes an issue where packages would be skipped if they contained
e.g. RxJS 5 style imports such as
```
import { observeOn } from 'rxjs/operators/observeOn';
```
Given that no package.json file can be found at the imported path, the
dependency would be reported missing, causing the package to be skipped.
PR Close#27031
This API is part of our public api surface and needs to be monitored by the public_api_guard.
I also had to go back and mark all of the exported functions with @publicApi jsdoc tag.
PR Close#27008
these files are test data and note test infrastructure, so they don't belong to this group.
this means that the core group can now approve the golden symbol changes
PR Close#27004
Make the error messages thrown when instantiating downgraded components,
injectables and modules more descriptive and actionable, also taking
into account incorrect use of the `downgradedModule` field.
PR Close#26217
Currently, calling `downgradeModule()` more than once is not supported.
If one wants to downgrade multiple Angular modules, they can create a
"super-module" that imports all the rest and downgrade that.
This commit adds support for downgrading multiple Angular modules. If
multiple modules are downgraded, then one must explicitly specify the
downgraded module that each downgraded component or injectable belongs
to, when calling `downgradeComponent()` and `downgradeInjectable()`
respectively.
No modification is needed (i.e. there is no need to specify a module for
downgraded components and injectables), if an app is not using
`downgradeModule()` or if there is only one downgraded Angular module.
Fixes#26062
PR Close#26217
These templates take advatange of github's feature that allows
us to define multiple templates and which the UI presents to the
user and lets them choose the most appropriate template.
The goal of this is to tailor the templates to the templates to
various use-cases and bug categories and provide better guidance to
developers filing issues which should result in more efficient
processing of the issue backlog.
PR Close#26918
Previously the ivy definition calls we going directly after the
class constructor function But this meant that the lifecycle
hooks attached to the prototype were ignored by the ngtsc
compiler.
Now the definitions are written to the end of the IIFE block,
just before the return statement.
Closes#26849
PR Close#26856
Since 8fc4ae51f, the jobs that need Xvfb use `*-browser` CircleCI docker
image flavors (e.g. `circleci/node:10.12-browsers`), which automatically
start Xvfb.
PR Close#26869
- Format JSDoc for notificationClicks
- Add comment on why handleClick does not use hasOwnProperty
- Add additional test that uses handleClick without action
PR Close#25860
- Serialize notification object before using postMessage
- Close notification on click
- Focus browser if it is not already focused on click
PR Close#25860
The previous version did not support the 'notificationclick' event.
Add event handler for the event and provide an observable of
clicked notifications in the SwPush service.
Closes#20956, #22311
PR Close#25860
In some overloads, the parameter type can be a large anonymous
object type.
This change displays such types as `object`. It is then up to the
documentation author to put more information about the type in the
method usage notes.
PR Close#24976
* Make individual overloads collapsible
* Show only the first overload expanded, rest collapsed
* Text changes to 'collapse all' once 'show all' is clicked
* Fix chevron/carrot rotation animation when overloads / overload item is expanded or collapsed
PR Close#24976
This integration test was created from a vanilla CLI generated
project with the following modifications:
* remove `PercentPipe` usage from `app.component.html`
- these are not yet supported by ivy
* changed `ng test` in `package.json` to only to `ng build`
- right now we can only confirm that the app will build
* hard-code `ngDevMode` in `index.html`
- the CLI does not yet set this correctly
PR Close#26403
When compiling the flat-file version of the `@angular/core` we need to be aware
that we cannot rely upon imported names to access the ivy definition functions.
The compiler is already clever enough to use local function calls rather than
trying to add a namespaced import, but there is a problem if the local name of the
function is different to the exported name. This is the case for functions that
are not part of the public API, and so are exported under a barred-O private alias.
In `@angular/core` the only decorations in use are `@NgModule` and `@Injectable`.
There are no directives, components, pipes, etc.
Since `defineInjectable` is part of the public API of `@angular/core`, the compiler
is able to generate code that references the original non-barred-O version of the
function.
But the `defineNgModule` is not part of the public API and so the compiler must
generate code that refers to it by the private barred-O version of the function.
This commit imports and then re-exports this barred-O version of `defineModule` to
ensure that the symbol is available in the local scope of the flat-file versions of
the `@angular/core` library.
PR Close#26403
For each package entry-point there is only one format that
is used to compile the typings files (.d.ts). This will be
either esm2015 or fesm2015 (preferred). So we would not run
any dts processing in the renderer if we are not compiling
the appropriate format.
PR Close#26403
* rename test helper script
* add material to the ngcc integration test
* add MatButton to ngcc integration test checks
* remove platform-server from ngcc integration test
This package does not yet compile as it contains a package-private
(internal) decorated class, which the ngcc compiler does not yet
handle.
PR Close#26403
1) The `DecorationAnalyzer now analyzes all source files, rather than just
the entry-point files, which fixes#26183.
2) The `DecoratorAnalyzer` now runs all the `handler.analyze()` calls
across the whole entry-point *before* running `handler.compile()`. This
ensures that dependencies between the decorated classes *within* an
entry-point are known to the handlers when running the compile process.
3) The `Renderer` now does the transformation of the typings (.d.ts) files
which allows us to support packages that only have flat format
entry-points better, and is faster, since we won't parse `.d.ts` files twice.
PR Close#26403
The rendering of typings is not specific to the package
format, so it doesn't make sense to put it in a specific
renderer.
As a result there is no real difference between esm5 and esm2015
renderers, so there is no point in having separate classes.
PR Close#26403
Previously we always used the non-flat format because we thought
that this was the one that would always be available.
It turns out that this is not the case and that only one of the flat and
non-flat formats may be available.
Therefore we should use whichever is available, defaulting to the flat
format if that exists, since that will be faster to parse.
PR Close#26403
Going forward we need to be able to do the same work on both
flat and non-flat module formats (such as computing arity and
transforming .d.ts files)
PR Close#26403
The Material project uses slightly different properties to the
core Angular project for specifying the different format entry-point.
This commit ensures that we map these properties correctly for both
types of project.
PR Close#26403
The `NgModule` handler generates `R3References` for its declarations, imports,
exports, and bootstrap components, based on the relative import path
between the module and the classes it's referring to. This works fine for
compilation of a .ts Program inside ngtsc, but in ngcc the import needed
in the .d.ts file may be very different to the import needed between .js
files (for example, if the .js files are flattened and the .d.ts is not).
This commit introduces a new API in the `ReflectionHost` for extracting the
.d.ts version of a declaration, and makes use of it in the
`NgModuleDecorationHandler` to write a correct expression for the `NgModule`
definition type.
PR Close#26403
This commit causes a call to setClassMetadata() to be emitted for every
type being compiled by ngtsc (every Angular type). With this metadata,
the TestBed should be able to recompile these classes when overriding
decorator information.
Testing strategy: Tests in the previous commit for
generateSetClassMetadataCall() verify that the metadata as generated is
correct. This commit enables the generation for each DecoratorHandler,
and a test is added to ngtsc_spec to verify all decorated types have
metadata generated for them.
PR Close#26860
This commit introduces generateSetClassMetadataCall(), an API in ngtsc
for generating calls to setClassMetadata() for a given declaration. The
reflection API is used to enumerate Angular decorators on the declaration,
which are converted to a format that ReflectionCapabilities can understand.
The reflection metadata is then patched onto the declared type via a call
to setClassMetadata().
This is simply a utility, a future commit invokes this utility for
each DecoratorHandler.
Testing strategy: tests are included which exercise generateSetClassMetadata
in isolation.
PR Close#26860
This commit introduces the setClassMetadata() private function, which
adds metadata to a type in a way that can be accessed via Angular's
ReflectionCapabilities. Currently, it writes to static fields as if
the metadata being added was downleveled from decorators by tsickle.
The plan is for ngtsc to emit code which calls this function, passing
metadata on to the runtime for testing purposes. Calls to this function
would then be tree-shaken away for production bundles.
Testing strategy: proper operation of this function will be an integral
part of TestBed metadata overriding. Angular core tests will fail if this
is broken.
PR Close#26860
Previously, the Directive, Injectable, and Pipe DecoratorHandlers were
directly returning @angular/compiler metadata from their analyze() steps.
This precludes returning any additional information along with that
metadata. This commit introduces a wrapper interface for these handlers,
opening the door for additional information to be returned from analyze().
Testing strategy: this is a refactor commit, existing test coverage is
sufficient.
PR Close#26860
Previously the ReflectionHost API only returned the names of decorators
and not a reference to their TypeScript Identifier. This commit adds
the identifier itself, so that a consumer can write references to the
decorator.
Testing strategy: this commit is trivial, and the functionality will be
exercised by downstream tests.
PR Close#26860
Uglify and other tree-shakers attempt to determine if the invocation
of a function is side-effectful, and remove it if so (and the result
is unused). A /*@__PURE__*/ annotation on the call site can be used
to hint to the optimizer that the invocation has no side effects and
is safe to tree-shake away.
This commit adds a 'pure' flag to the output AST function call node,
which can be used to signal to downstream emitters that a pure
annotation should be added. It also modifies ngtsc's emitter to
emit an Uglify pure annotation when this flag is set.
Testing strategy: this will be tested via its consumers, by asserting
that pure functions are translated with the correct comment.
PR Close#26860
* Removed `andObservable` helper function in favor of inline implementation
* Flow `boolean | UrlTree` through guards check
* Add tests to verify behavior of `checkGuards` function flowing `UrlTree` properly
PR Close#26521
* No longer depends on a custom CircleCI docker image that comes with Bazel pre-installed. Since Bazel is now available through NPM, we should be able to use the version from `@bazel/bazel` in order to enforce a consistent environment on CI and locally.
* This also reduces the amount of packages that need to be published (ngcontainer is removed)
PR Close#26691
This makes yarn_install of ngdeps under Bazel faster, since we don't need many of the large dependencies.
It's important because downstream angular/bazel users will observe the same install time.
PR Close#26691
* Fixes that the `ts-api-guardian` package does not work on Windows with Bazel. This is because `ts-api-guardian` does not resolve the runfiles through theNodeJS `require` function that properly handles runfiles within Bazel.
PR Close#26761
Since the API guardian can be also used by other projects, we should not set up the default Angular project tag rules unless specified explicitly through a given command option (`useAngularTagRules`)
PR Close#26761
These tests are currently broken because of the following reasons:
- ivy no longer emits a generated index, so the filename of the main d.ts file is different
- ivy currently exports some symbols that don't match the golden file, this needs investigation
PR Close#26602
these files are not used because the api surface of this package is not considered
to be stable/public api.
the presence of these files only confuses the reader.
PR Close#26602
Add link to protactor.angular.io
Replace link from github.com/angular/universal to universal.angular.io
Replace link from github.com/angular/material2 to material.angular.io
fix#18257
PR Close#26653
Some of the text in CLI API docs were being auto-linked to API
pages. This was not correct, and in fact these blocks should not
have any auto links to Angular API at all.
Closes#26570
PR Close#26675
Previously errors in the summary file would include absolute file names.
This is undesirable as the output of a build should not depend on the
current working directory. Doing so causes nondeterminism issues in
builds.
PR Close#26759
This target fails with odd error that we need to investigate:
[01:19:32] I/direct - Using ChromeDriver directly...
[01:19:32] E/direct - Error code: 135
[01:19:32] E/direct - Error message: Could not find chromedriver at /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/external/ngdeps/node_modules/webdriver-manager/selenium/chromedriver_2.41. Run 'webdriver-manager update' to download binaries.
[01:19:32] E/direct - Error: Could not find chromedriver at /home/circleci/.cache/bazel/_bazel_circleci/9ce5c2144ecf75d11717c0aa41e45a8d/external/ngdeps/node_modules/webdriver-manager/selenium/chromedriver_2.41. Run 'webdriver-manager update' to download binaries.
PR Close#26735
These tests were previously not running on CI so they have always been broken,
or got broken just recently :-(.
test(ivy): mark failing test targets with fixme-ivy-jit and fixme-ivy-local tags
PR Close#26735
By splitting the jobs, if something goes wrong with deploying (e.g. a
network issue), we can re-run just that part instead of having to wait
for all the tests to complete again.
In terms of total duration, the difference should be minimal, because
the two operations (testing and deploying) do not depend on shared
tasks. For example, we need to build again (for the specific target
environment; e.g. stable, next, etc.) before deploying anyway.
PR Close#26746
These files are not needed once the size has been calculated and there
is no point in keeping them around.
Deleting them prevents, for example, uploading unnecessary files from
`aio/dist/` to Firebase (because `deploy-to-firebase.sh` runs the
payload size checks right before deploying).
PR Close#26746
Previously, `firebase-tools@3.x` was used and the deployment from
CircleCI failed with `Unexpected error` (HTTP code: 410).
This commit ensures that we use a recent version of `firebase-tools` for
deploying to Firebase. It also ensures that we use the locally installed
`firebase-tools` (not sure where it came from before 😁).
PR Close#26746
Comment nodes that are child nodes of unsafe elements are identified as text nodes. This results in the comment node being returned as an encoded string.
Add a check to ignore such comment nodes.
PR Close#25879
Some of the `aio`-/`docs`-related jobs rely on the locally built Angular
packages. When these jobs fail, it could mean that there is an issue
with the Angular packages (e.g. an unintentional breaking change).
This commit ensures that the `publish_artifacts` job is not run, unless
those `aio`-/`docs`-related jobs pass.
(The `test_aio_tools` job also uses the locally built Angular packages,
but it does not exercise them in a meaningful way to be worth making it
a prerequisite for `publish_artifacts`.)
PR Close#26722
We are close enough to blacklist a few test targets, rather than whitelist targets to run...
Because bazel rules can be composed of other rules that don't inherit tags automatically,
I had to explicitly mark all of our ts_library and ng_module targes with "ivy-local" and
"ivy-jit" tags so that we can create a query that excludes all fixme- tagged targets even
if those targets are composed of other targets that don't inherit this tag.
This is the updated overview of ivy related bazel tags:
- ivy-only: target that builds or runs only under ivy
- fixme-ivy-jit: target that doesn't yet build or run under ivy with --compile=jit
- fixme-ivy-local: target that doesn't yet build or run under ivy with --compile=local
- no-ivy-jit: target that is not intended to build or run under ivy with --compile=jit
- no-ivy-local: target that is not intended to build or run under ivy with --compile=local
PR Close#26471
This lets Angular Bazel users install our transitive deps, rather than have to list them in their WORKSPACE file.
If they want a different version of one of these deps, they just need to install it before calling rules_angular_dependencies.
PR Close#26488
Allow the jsdoc tag processing to be configured by
type (export, member, param) and by action (required,
banned, toCopy).
This is a pre-requisite to moving over to using `@publicApi`
tags rather than `@stable` and `@experimental`.
PR Close#26595
This commit adds generation of .ngsummary.js shims alongside .ngfactory.js
shims when generated files are enabled.
Generated .ngsummary shims contain a single, null export for every exported
class with decorators that exists in the original source files. Ivy code
does not depend on summaries, so these exist only as a placeholder to allow
them to be imported and their values passed to old APIs. This preserves
backwards compatibility.
Testing strategy: this commit adds a compiler test to verify the correct
shape and contents of the generated .ngsummary.js files.
PR Close#26495
This commit refactors the shim host to be agnostic to the shims being
generated, and provides an API for generating additional shims besides
the .ngfactory.js. This will be used in a following commit to generate
.ngsummary.js shims.
Testing strategy: this refactor introduces no new behavior, so it's
sufficient that the existing tests for factory shim generation continue
to pass.
PR Close#26495
This simple refactor of the build rules renames the .ngfactory.js shim
generator to 'shims' instead of 'factories', in preparation for adding
.ngsummary.js shim generation.
Testing strategy: this commit does not introduce any new behavior and
merely moves files and symbols around. It's sufficient that the existing
ngtsc tests pass.
PR Close#26495
This commit includes the following changes:
* CLI version information is read from the CLI package from which
we read the help files.
* CLI API pages now contain GH links
* line numbers are not shown in GH links, if the doc does not
have a truthy `startingLine` value. This allows us to remove
hard coded checks for `guide` pages
* content pages and CLI api docs no longer have a `startingLine`
* the hard-coded `packages` path segment has been removed from
the templates; instead we now only use the `realProjectRelativePath`.
* the `realProjectRelativePath` has been updated accordingly for API
and CLI API docs.
PR Close#26515
Originally, the ivy_switch mechanism used Bazel genrules to conditionally
compile one TS file or another depending on whether ngc or ngtsc was the
selected compiler. This was done because we wanted to avoid importing
certain modules (and thus pulling them into the build) if Ivy was on or
off. This mechanism had a major drawback: ivy_switch became a bottleneck
in the import graph, as it both imports from many places in the codebase
and is imported by many modules in the codebase. This frequently resulted
in cyclic imports which caused issues both with TS and Closure compilation.
It turns out ngcc needs both code paths in the bundle to perform the switch
during its operation anyway, so import switching was later abandoned. This
means that there's no real reason why the ivy_switch mechanism needed to
operate at the Bazel level, and for the ivy_switch file to be a bottleneck.
This commit removes the Bazel-level ivy_switch mechanism, and introduces
an additional TypeScript transform in ngtsc (and the pass-through tsc
compiler used for testing JIT) to perform the same operation that ngcc
does, and flip the switch during ngtsc compilation. This allows the
ivy_switch file to be removed, and the individual switches to be located
directly next to their consumers in the codebase, greatly mitigating the
circular import issues and making the mechanism much easier to use.
As part of this commit, the tag for marking switched variables was changed
from __PRE_NGCC__ to __PRE_R3__, since it's no longer just ngcc which
flips these tags. Most variables were renamed from R3_* to SWITCH_* as well,
since they're referenced mostly in render2 code.
Test strategy: existing test coverage is more than sufficient - if this
didn't work correctly it would break the hello world and todo apps.
PR Close#26550
Since #26396, the `title` property is ignored and `header` should be
used instead for specifying a code snippet's header.
This commit ensures that we don't accidentally set `title` have it be
silently ignored.
PR Close#26514
Added word *relative* to the **Routes at the app level** section description. This was not specified before. The routes in the *lazy-loading-ngmodules/src/app/app-routing.module.ts* also had `loadChildren` values starting with `app/...`.
The code for `app-routing.module.ts` is already fixed in [this commit](67ad9468d3)
PR Close#26504
Change the headings of the template-driven forms guide page.
This makes the first heading consistent with other guide pages and the menu label reducing confusion to users browsing the guide.
PR Close#25900
* If all guards return `true`, operator returns `true`
* `false` and `UrlTree` are now both valid returns from a guard
* Both these values wait for higher priority guards to resolve
* Highest priority `false` or `UrlTree` value will be returned
PR Close#26478
Since the SW immediately takes over all clients, it is safe to delete
caches used by older (e.g. beta) `@angular/service-worker` versions to
avoid running into browser storage quota limitations.
PR Close#26319
# - we trust that people do the right thing and not approve changes they don't feel confident reviewing
# - we use github teams so that we funnel code reviews to the most appropriate reviewer, this is why the team structure is fine-grained
# - we enforce that only approved PRs get merged to ensure that unreviewed code doesn't get accidentally merged
# - we delegate approval rights as much as possible so that we can scale better
# - each group must have at least one person, but several people are preferable to avoid a single point of failure issues
# - most file groups have one or two global approvers groups as fallbacks:
# - @angular/fw-global-approvers: for approving minor changes, large-scale refactorings, and emergency situations.
# - @angular/fw-global-approvers-for-docs-only-changes: for approving minor documentation-only changes that don't require engineering review
# - a small number of file groups have very limited number of reviewers because incorrect changes to the files they guard would have serious consequences (e.g. security, public api)
#
# Configuration nuances:
#
# - This configuration works in conjunction with the protected branch settings that require all changes to be made via pull requests with at least one approval.
# - This approval can come from an appropriate codeowner, or any repo collaborator (person with write access) if the PR is authored by a codeowner.
# - Each codeowners team must have write access to the repo, otherwise their reviews won't count.
#
# In the case of emergency, the repo administrators which include angular-caretaker can bypass this requirement.
To expedite issue processing please search open and closed issues before submitting a new one.
Existing issues often contain information about workarounds, resolution, or progress updates.
🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅🔅-->
# 🐞 bug report
### Affected Package
<!-- Can you pin-point one or more @angular/* packages as the source of the bug? -->
<!-- ✍️edit: --> The issue is caused by package @angular/....
### Is this a regression?
<!-- Did this behavior use to work in the previous version? -->
<!-- ✍️--> Yes, the previous version in which this bug was not present was: ....
### Description
<!-- ✍️--> A clear and concise description of the problem...
## 🔬 Minimal Reproduction
<!--
Please create and share minimal reproduction of the issue starting with this template: https://stackblitz.com/fork/angular-issue-repro2
-->
<!-- ✍️--> https://stackblitz.com/...
<!--
If StackBlitz is not suitable for reproduction of your issue, please create a minimal GitHub repository with the reproduction of the issue. Share the link to the repo below along with step-by-step instructions to reproduce the problem, as well as expected and actual behavior.
Issues that don't have enough info and can't be reproduced will be closed.
You can read more about issue submission guidelines here: https://github.com/angular/angular/blob/master/CONTRIBUTING.md#-submitting-an-issue
-->
## 🔥 Exception or Error
<pre><code>
<!-- If the issue is accompanied by an exception or an error, please share it below: -->
<!-- ✍️-->
</code></pre>
## 🌍 Your Environment
**Angular Version:**
<pre><code>
<!-- run `ng version` and paste output below -->
<!-- ✍️-->
</code></pre>
**Anything else relevant?**
<!-- ✍️Is this a browser specific issue? If so, please specify the browser and version. -->
<!-- ✍️Do any of these matter: operating system, IDE, package manager, HTTP server, ...? If so, please mention it below. -->
# list of patterns to ignore for the files changed by the PR
exclude:
- "packages/*"
- "packages/bazel/*"
- "packages/bazel/src/builders/**"
- "packages/bazel/src/ng_package/**"
- "packages/bazel/src/protractor/**"
- "packages/bazel/src/schematics/**"
- "packages/compiler-cli/src/ngcc/**"
- "packages/docs/**"
- "packages/elements/schematics/**"
- "packages/examples/**"
- "packages/language-service/**"
- "packages/private/**"
- "packages/service-worker/**"
- "**/.gitignore"
- "**/.gitkeep"
- "**/yarn.lock"
- "**/package.json"
- "**/tsconfig-build.json"
- "**/tsconfig.json"
- "**/rollup.config.js"
- "**/BUILD.bazel"
- "**/*.md"
- "packages/**/integrationtest/**"
- "packages/**/test/**"
@ -57,13 +71,17 @@ merge:
# label to monitor
mergeLabel:"PR action: merge"
# adding any of these labels will also add the merge label
mergeLinkedLabels:
- "PR action: merge-assistance"
# list of checks that will determine if the merge label can be added
checks:
# require that the PR has reviews from all requested reviewers
#
# This enables us to request reviews from both eng and tech writers, or multiple eng folks, and prevents accidental merges.
# Rather than merging PRs with pending reviews, if all PullApprove requirements are satisfied and additional reviews are not needed pending reviewers should be removed via GitHub UI (this also leaves an audit trail behind these decisions).
# Rather than merging PRs with pending reviews, if all approvals are obtained and additional reviews are not needed, any pending reviewers should be removed via GitHub UI (this also leaves an audit trail behind these decisions).
requireReviews:true,
# whether the PR shouldn't have a conflict with the base branch
@ -83,8 +101,6 @@ merge:
# list of PR statuses that need to be successful
requiredStatuses:
- "continuous-integration/travis-ci/pr"
- "code-review/pullapprove"
- "ci/circleci: build"
- "ci/circleci: lint"
@ -124,3 +140,23 @@ triage:
-
- "type: RFC / Discussion / question"
- "comp: *"
# options for the triage PR plugin
triagePR:
# set to true to disable
disabled:false
# number of the milestone to apply when the PR has not been triaged yet
needsTriageMilestone:83,
# number of the milestone to apply when the PR is triaged
defaultMilestone:82,
# arrays of labels that determine if a PR has been triaged by the caretaker
l1TriageLabels:
-
- "comp: *"
# arrays of labels that determine if a PR has been fully triaged
This version includes Ivy features and internal refactorings. There are no user-facing changes.
### Bug Fixes
* **bazel:** Add [@bazel](https://github.com/bazel)/bazel to dev deps ([#28032](https://github.com/angular/angular/issues/28032)) ([21093b9](https://github.com/angular/angular/commit/21093b9))
* **bazel:** Add /bazel-out to .gitignore ([#27874](https://github.com/angular/angular/issues/27874)) ([e4fc8ba](https://github.com/angular/angular/commit/e4fc8ba))
* **bazel:** Add ibazel to deps of Bazel project ([#28090](https://github.com/angular/angular/issues/28090)) ([28d34b6](https://github.com/angular/angular/commit/28d34b6))
* **bazel:** Bazel schematics should add router package ([#28141](https://github.com/angular/angular/issues/28141)) ([02a852a](https://github.com/angular/angular/commit/02a852a))
* **bazel:** flat module misses AMD module name on windows ([#27839](https://github.com/angular/angular/issues/27839)) ([c3d8e28](https://github.com/angular/angular/commit/c3d8e28))
* **bazel:** ng_package creates invalid typings reexport on windows ([#27829](https://github.com/angular/angular/issues/27829)) ([6b394f6](https://github.com/angular/angular/commit/6b394f6))
* **bazel:** packager not properly removing amd directives on windows ([#27829](https://github.com/angular/angular/issues/27829)) ([fad4145](https://github.com/angular/angular/commit/fad4145))
* **bazel:** protractor rule does not run spec files with underscore ([#28022](https://github.com/angular/angular/issues/28022)) ([f05c5f8](https://github.com/angular/angular/commit/f05c5f8))
* **bazel:** protractor utils cannot start server on windows ([#27915](https://github.com/angular/angular/issues/27915)) ([0be8487](https://github.com/angular/angular/commit/0be8487))
* **bazel:** replay compilation uses wrong compiler for building esm5 ([#28053](https://github.com/angular/angular/issues/28053)) ([fbbdaaa](https://github.com/angular/angular/commit/fbbdaaa))
* **router:** ensure URL is updated after second redirect with UrlUpdateStrategy="eager" ([#27680](https://github.com/angular/angular/issues/27680)) ([6ae7aee](https://github.com/angular/angular/commit/6ae7aee)), closes [#27116](https://github.com/angular/angular/issues/27116)
7.2.0 release also contains all the fixes released in 7.1.4.
### Features
* add support for typescript 3.2 ([#27536](https://github.com/angular/angular/issues/27536)) ([17e702b](https://github.com/angular/angular/commit/17e702b))
* **bazel:** ng-new schematics with Bazel ([#27277](https://github.com/angular/angular/issues/27277)) ([06d4a0c](https://github.com/angular/angular/commit/06d4a0c))
* **forms:** match getError and hasError to get method signature ([#20211](https://github.com/angular/angular/issues/20211)) ([1b0b36d](https://github.com/angular/angular/commit/1b0b36d))
* **router:** add predicate function mode for runGuardsAndResolvers ([#27682](https://github.com/angular/angular/issues/27682)) ([12c3176](https://github.com/angular/angular/commit/12c3176)), closes [#26861](https://github.com/angular/angular/issues/26861) [#18253](https://github.com/angular/angular/issues/18253) [#27464](https://github.com/angular/angular/issues/27464)
* **router:** add a Navigation type available during navigation ([#27198](https://github.com/angular/angular/issues/27198)) ([d40af0c](https://github.com/angular/angular/commit/d40af0c))
* **router:** allow passing state to `NavigationExtras` ([#27198](https://github.com/angular/angular/issues/27198)) ([67f4a5d](https://github.com/angular/angular/commit/67f4a5d))
* **router:** restore whole object when navigating back to a page managed by Angular router ([#27198](https://github.com/angular/angular/issues/27198)) ([2684249](https://github.com/angular/angular/commit/2684249))
### Bug Fixes
* **animations:** do not truncate decimals for delay ([#24455](https://github.com/angular/angular/issues/24455)) ([f1c9d6a](https://github.com/angular/angular/commit/f1c9d6a))
* **animations:** mark actual descendant node as disabled ([#26180](https://github.com/angular/angular/issues/26180)) ([df123e0](https://github.com/angular/angular/commit/df123e0))
* **bazel:** unable to launch protractor test on windows ([#27850](https://github.com/angular/angular/issues/27850)) ([1e6c9be](https://github.com/angular/angular/commit/1e6c9be))
* **bazel:** devserver entry_module should have underscore name ([#27719](https://github.com/angular/angular/issues/27719)) ([f57916c](https://github.com/angular/angular/commit/f57916c))
* **bazel:** emit full node stack traces when Angular compilation crashes ([#27678](https://github.com/angular/angular/issues/27678)) ([522919a](https://github.com/angular/angular/commit/522919a))
* **bazel:** fix major/minor semver check between [@angular](https://github.com/angular)/bazel npm packager version and angular bazel repo version ([#27635](https://github.com/angular/angular/issues/27635)) ([1cc08b4](https://github.com/angular/angular/commit/1cc08b4))
* **bazel:** Load http_archive and rules_nodejs dependencies ([#27609](https://github.com/angular/angular/issues/27609)) ([8313ffc](https://github.com/angular/angular/commit/8313ffc))
* **bazel:** ng_package writes unrelevant definitions to bazel out ([#27519](https://github.com/angular/angular/issues/27519)) ([44dfa60](https://github.com/angular/angular/commit/44dfa60)), closes [/github.com/angular/angular/blob/4f9374951d67c75f67a31c110bd61ab72563db7d/packages/bazel/src/ng_package/packager.ts#L105-L124](https://github.com//github.com/angular/angular/blob/4f9374951d67c75f67a31c110bd61ab72563db7d/packages/bazel/src/ng_package/packager.ts/issues/L105-L124)
* **bazel:** Set module_name and enable ng test ([#27715](https://github.com/angular/angular/issues/27715)) ([85866de](https://github.com/angular/angular/commit/85866de))
* **bazel:** fix TS errors in the `schematics/bazel-workspace` files ([#27600](https://github.com/angular/angular/issues/27600)) ([3290fc3](https://github.com/angular/angular/commit/3290fc3))
* **bazel:** Read latest versions from latest-versions.ts & use semver check ([#27526](https://github.com/angular/angular/issues/27526)) ([30a3b49](https://github.com/angular/angular/commit/30a3b49))
* **bazel:** tsickle dependency not working with typescript 3.1.x ([#27402](https://github.com/angular/angular/issues/27402)) ([f034114](https://github.com/angular/angular/commit/f034114))
* **bazel:** do not throw error when writing tsickle externs ([#27200](https://github.com/angular/angular/issues/27200)) ([20a2bae](https://github.com/angular/angular/commit/20a2bae))
* **bazel:** do not throw if ts compile action does not create esm5 outputs ([#27401](https://github.com/angular/angular/issues/27401)) ([c61a8b7](https://github.com/angular/angular/commit/c61a8b7))
* **bazel:** ng_package cannot be run multiple times without clean ([#27200](https://github.com/angular/angular/issues/27200)) ([4f93749](https://github.com/angular/angular/commit/4f93749))
* **bazel:** ng_package not generating UMD bundles on windows ([#27200](https://github.com/angular/angular/issues/27200)) ([7d59880](https://github.com/angular/angular/commit/7d59880))
* **bazel:** ng_package should correctly map to source maps in secondary entry-points ([#27313](https://github.com/angular/angular/issues/27313)) ([eb17502](https://github.com/angular/angular/commit/eb17502)), closes [#25510](https://github.com/angular/angular/issues/25510)
* **compiler-cli:** create LiteralLikeNode for String and Number literal ([#27536](https://github.com/angular/angular/issues/27536)) ([2c9b6c0](https://github.com/angular/angular/commit/2c9b6c0))
* **compiler-cli:** flatModuleIndex files not generated on windows with multiple input files ([#27200](https://github.com/angular/angular/issues/27200)) ([d3c08e7](https://github.com/angular/angular/commit/d3c08e7))
* **core:** export a value for InjectFlags ([#27279](https://github.com/angular/angular/issues/27279)) ([23b06af](https://github.com/angular/angular/commit/23b06af)), closes [#27251](https://github.com/angular/angular/issues/27251)
* **core:** More precise return type for `InjectableDecorator` ([#27360](https://github.com/angular/angular/issues/27360)) ([4b9948c](https://github.com/angular/angular/commit/4b9948c)), closes [#26942](https://github.com/angular/angular/issues/26942)
* **forms:** typed argument for FormBuilder group ([#26985](https://github.com/angular/angular/issues/26985)) ([b0c7561](https://github.com/angular/angular/commit/b0c7561))
* **platform-server:** add [@angular](https://github.com/angular)/http to the list of peerDependencies ([#27307](https://github.com/angular/angular/issues/27307)) ([32c5be9](https://github.com/angular/angular/commit/32c5be9)), closes [#26154](https://github.com/angular/angular/issues/26154)
* **router:** ensure URL is updated after second redirect with UrlUpdateStrategy="eager" ([#27523](https://github.com/angular/angular/issues/27523)) ([ad26cd6](https://github.com/angular/angular/commit/ad26cd6)), closes [#27116](https://github.com/angular/angular/issues/27116)
* **router:** update URL after redirects when urlHandlingStrategy='eager' ([#27356](https://github.com/angular/angular/issues/27356)) ([11a8bd8](https://github.com/angular/angular/commit/11a8bd8)), closes [#27076](https://github.com/angular/angular/issues/27076)
* **upgrade:** allow nesting components from different downgraded modules ([#27217](https://github.com/angular/angular/issues/27217)) ([bc0ee01](https://github.com/angular/angular/commit/bc0ee01))
* **upgrade:** upgrade Directive facade should not return different instance from constructor ([#27660](https://github.com/angular/angular/issues/27660)) ([c986d3d](https://github.com/angular/angular/commit/c986d3d))
* **upgrade:** don't rely upon the runtime to resolve forward refs ([#27132](https://github.com/angular/angular/issues/27132)) ([a4462c2](https://github.com/angular/angular/commit/a4462c2))
* **animations:** do not truncate decimals for delay ([#24455](https://github.com/angular/angular/issues/24455)) ([cd1e206](https://github.com/angular/angular/commit/cd1e206))
* **animations:** mark actual descendant node as disabled ([#26180](https://github.com/angular/angular/issues/26180)) ([453589f](https://github.com/angular/angular/commit/453589f))
* **bazel:** devserver entry_module should have underscore name ([#27719](https://github.com/angular/angular/issues/27719)) ([b108e9a](https://github.com/angular/angular/commit/b108e9a))
* **bazel:** emit full node stack traces when Angular compilation crashes ([#27678](https://github.com/angular/angular/issues/27678)) ([0d8528b](https://github.com/angular/angular/commit/0d8528b))
* **bazel:** fix major/minor semver check between [@angular](https://github.com/angular)/bazel npm packager version and angular bazel repo version ([#27635](https://github.com/angular/angular/issues/27635)) ([3ed1e84](https://github.com/angular/angular/commit/3ed1e84))
* **bazel:** Load http_archive and rules_nodejs dependencies ([#27609](https://github.com/angular/angular/issues/27609)) ([89ace1a](https://github.com/angular/angular/commit/89ace1a))
* **bazel:** ng_package writes unrelevant definitions to bazel out ([#27519](https://github.com/angular/angular/issues/27519)) ([ef056c5](https://github.com/angular/angular/commit/ef056c5)), closes [/github.com/angular/angular/blob/4f9374951d67c75f67a31c110bd61ab72563db7d/packages/bazel/src/ng_package/packager.ts#L105-L124](https://github.com//github.com/angular/angular/blob/4f9374951d67c75f67a31c110bd61ab72563db7d/packages/bazel/src/ng_package/packager.ts/issues/L105-L124)
* **bazel:** Read latest versions from latest-versions.ts & use semver check ([#27591](https://github.com/angular/angular/issues/27591)) ([93078e3](https://github.com/angular/angular/commit/93078e3))
* **bazel:** Set module_name and enable ng test ([#27715](https://github.com/angular/angular/issues/27715)) ([183f278](https://github.com/angular/angular/commit/183f278))
* **common:** KeyValuePipe should return empty array for empty objects ([#27258](https://github.com/angular/angular/issues/27258)) ([fa3af8b](https://github.com/angular/angular/commit/fa3af8b))
* **bazel:** tsickle dependency not working with typescript 3.1.x ([#27402](https://github.com/angular/angular/issues/27402)) ([a9f39a4](https://github.com/angular/angular/commit/a9f39a4))
* **bazel:** do not throw error when writing tsickle externs ([#27200](https://github.com/angular/angular/issues/27200)) ([079c4b3](https://github.com/angular/angular/commit/079c4b3))
* **bazel:** do not throw if ts compile action does not create esm5 outputs ([#27401](https://github.com/angular/angular/issues/27401)) ([9b4d959](https://github.com/angular/angular/commit/9b4d959))
* **bazel:** ng_package cannot be run multiple times without clean ([#27200](https://github.com/angular/angular/issues/27200)) ([1ca2923](https://github.com/angular/angular/commit/1ca2923))
* **bazel:** ng_package not generating UMD bundles on windows ([#27200](https://github.com/angular/angular/issues/27200)) ([e476c38](https://github.com/angular/angular/commit/e476c38))
* **bazel:** ng_package should correctly map to source maps in secondary entry-points ([#27313](https://github.com/angular/angular/issues/27313)) ([fc2c23e](https://github.com/angular/angular/commit/fc2c23e)), closes [#25510](https://github.com/angular/angular/issues/25510)
* **compiler-cli:** flatModuleIndex files not generated on windows with multiple input files ([#27200](https://github.com/angular/angular/issues/27200)) ([8087b6b](https://github.com/angular/angular/commit/8087b6b))
* **compiler-cli:** ngtsc shim files not being generated on case-insensitive platforms ([#27466](https://github.com/angular/angular/issues/27466)) ([84f2928](https://github.com/angular/angular/commit/84f2928)), closes [/github.com/Microsoft/TypeScript/blob/3e4c5c95abd515eb9713b881d27ab3a93cc00461/src/compiler/sys.ts#L681-L682](https://github.com//github.com/Microsoft/TypeScript/blob/3e4c5c95abd515eb9713b881d27ab3a93cc00461/src/compiler/sys.ts/issues/L681-L682)
* **platform-server:** add [@angular](https://github.com/angular)/http to the list of peerDependencies ([#27307](https://github.com/angular/angular/issues/27307)) ([236ac06](https://github.com/angular/angular/commit/236ac06)), closes [#26154](https://github.com/angular/angular/issues/26154)
* **core:** export a value for InjectFlags ([#27279](https://github.com/angular/angular/issues/27279)) ([bdf5f3e](https://github.com/angular/angular/commit/bdf5f3e)), closes [#27251](https://github.com/angular/angular/issues/27251)
* **core:** allow null value for renderer setElement(…) ([#17065](https://github.com/angular/angular/issues/17065)) ([ff15043](https://github.com/angular/angular/commit/ff15043)), closes [#13686](https://github.com/angular/angular/issues/13686)
* **router:** fix regression where navigateByUrl promise didn't resolve on CanLoad failure ([#26455](https://github.com/angular/angular/issues/26455)) ([1c9b065](https://github.com/angular/angular/commit/1c9b065)), closes [#26284](https://github.com/angular/angular/issues/26284)
* **service-worker:** clean up caches from old SW versions ([#26319](https://github.com/angular/angular/issues/26319)) ([2326b9c](https://github.com/angular/angular/commit/2326b9c))
* **upgrade:** properly destroy upgraded component elements and descendants ([#26209](https://github.com/angular/angular/issues/26209)) ([071934e](https://github.com/angular/angular/commit/071934e)), closes [#26208](https://github.com/angular/angular/issues/26208)
* **compiler:** generate inputs with aliases properly ([#26774](https://github.com/angular/angular/issues/26774)) ([19fcfc3](https://github.com/angular/angular/commit/19fcfc3))
* **compiler:** generate relative paths only in summary file errors ([#26759](https://github.com/angular/angular/issues/26759)) ([56f44be](https://github.com/angular/angular/commit/56f44be))
* **core:** ignore comment nodes under unsafe elements ([#25879](https://github.com/angular/angular/issues/25879)) ([d5cbcef](https://github.com/angular/angular/commit/d5cbcef))
* **core:** Remove static dependency from [@angular](https://github.com/angular)/core to [@angular](https://github.com/angular)/compiler ([#26734](https://github.com/angular/angular/issues/26734)) ([d042c4a](https://github.com/angular/angular/commit/d042c4a))
* **core:** support computed base class in metadata inheritance ([#24014](https://github.com/angular/angular/issues/24014)) ([95743e3](https://github.com/angular/angular/commit/95743e3))
* **bazel:** unknown replay compiler error in windows ([#26711](https://github.com/angular/angular/issues/26711)) ([aed95fd](https://github.com/angular/angular/commit/aed95fd))
* **core:** ensure that `ɵdefineNgModule` is available in flat-file formats ([#26403](https://github.com/angular/angular/issues/26403)) ([a64859b](https://github.com/angular/angular/commit/a64859b))
* **router:** remove type bludgeoning of context and outlet when running CanDeactivate ([#26496](https://github.com/angular/angular/issues/26496)) ([496372d](https://github.com/angular/angular/commit/496372d)), closes [#18253](https://github.com/angular/angular/issues/18253)
* **service-worker:** add typing to public api guard and fix lint errors ([#25860](https://github.com/angular/angular/issues/25860)) ([1061875](https://github.com/angular/angular/commit/1061875))
* **router:** add prioritizedGuardValue operator optimization and allowing UrlTree return from guard ([#26478](https://github.com/angular/angular/issues/26478)) ([fdfedce](https://github.com/angular/angular/commit/fdfedce))
* **compiler:** ability to mark an InvokeFunctionExpr as pure ([#26860](https://github.com/angular/angular/issues/26860)) ([4dfa71f](https://github.com/angular/angular/commit/4dfa71f))
* **forms:** add updateOn option to FormBuilder ([#24599](https://github.com/angular/angular/issues/24599)) ([e9e804f](https://github.com/angular/angular/commit/e9e804f))
* **router:** allow guards to return UrlTree as well as boolean ([#26521](https://github.com/angular/angular/issues/26521)) ([081f95c](https://github.com/angular/angular/commit/081f95c))
* **router:** allow redirect from guards by returning UrlTree ([#26521](https://github.com/angular/angular/issues/26521)) ([152ca66](https://github.com/angular/angular/commit/152ca66))
* **router:** guard returning UrlTree cancels current navigation and redirects ([#26521](https://github.com/angular/angular/issues/26521)) ([4e9f2e5](https://github.com/angular/angular/commit/4e9f2e5)), closes [#24618](https://github.com/angular/angular/issues/24618)
* **service-worker:** add typing for messagesClicked in SwPush service ([#25860](https://github.com/angular/angular/issues/25860)) ([c78c221](https://github.com/angular/angular/commit/c78c221))
* **service-worker:** close notifications and focus window on click ([#25860](https://github.com/angular/angular/issues/25860)) ([f5d5a3d](https://github.com/angular/angular/commit/f5d5a3d))
* **bazel:** unknown replay compiler error in windows ([#26711](https://github.com/angular/angular/issues/26711)) ([aed95fd](https://github.com/angular/angular/commit/aed95fd))
* **core:** ensure that `ɵdefineNgModule` is available in flat-file formats ([#26403](https://github.com/angular/angular/issues/26403)) ([a64859b](https://github.com/angular/angular/commit/a64859b))
* **router:** remove type bludgeoning of context and outlet when running CanDeactivate ([#26496](https://github.com/angular/angular/issues/26496)) ([496372d](https://github.com/angular/angular/commit/496372d)), closes [#18253](https://github.com/angular/angular/issues/18253)
* **service-worker:** add typing to public api guard and fix lint errors ([#25860](https://github.com/angular/angular/issues/25860)) ([1061875](https://github.com/angular/angular/commit/1061875))
* **upgrade:** make typings compatible with older AngularJS typings ([#26880](https://github.com/angular/angular/issues/26880)) ([64647af](https://github.com/angular/angular/commit/64647af)), closes [#26420](https://github.com/angular/angular/issues/26420)
### Features
* **compiler:** ability to mark an InvokeFunctionExpr as pure ([#26860](https://github.com/angular/angular/issues/26860)) ([4dfa71f](https://github.com/angular/angular/commit/4dfa71f))
* **forms:** add updateOn option to FormBuilder ([#24599](https://github.com/angular/angular/issues/24599)) ([e9e804f](https://github.com/angular/angular/commit/e9e804f))
* **router:** allow guards to return UrlTree as well as boolean ([#26521](https://github.com/angular/angular/issues/26521)) ([081f95c](https://github.com/angular/angular/commit/081f95c))
* **router:** allow redirect from guards by returning UrlTree ([#26521](https://github.com/angular/angular/issues/26521)) ([152ca66](https://github.com/angular/angular/commit/152ca66))
* **router:** guard returning UrlTree cancels current navigation and redirects ([#26521](https://github.com/angular/angular/issues/26521)) ([4e9f2e5](https://github.com/angular/angular/commit/4e9f2e5)), closes [#24618](https://github.com/angular/angular/issues/24618)
* **service-worker:** add typing for messagesClicked in SwPush service ([#25860](https://github.com/angular/angular/issues/25860)) ([c78c221](https://github.com/angular/angular/commit/c78c221))
* **service-worker:** close notifications and focus window on click ([#25860](https://github.com/angular/angular/issues/25860)) ([f5d5a3d](https://github.com/angular/angular/commit/f5d5a3d))
* **bazel:** unknown replay compiler error in windows ([#26711](https://github.com/angular/angular/issues/26711)) ([4d532df](https://github.com/angular/angular/commit/4d532df))
* **router:** remove type bludgeoning of context and outlet when running CanDeactivate ([#26496](https://github.com/angular/angular/issues/26496)) ([dc05385](https://github.com/angular/angular/commit/dc05385)), closes [#18253](https://github.com/angular/angular/issues/18253)
* **upgrade:** make typings compatible with older AngularJS typings ([#26880](https://github.com/angular/angular/issues/26880)) ([315d95c](https://github.com/angular/angular/commit/315d95c)), closes [#26420](https://github.com/angular/angular/issues/26420)
* **compiler:** generate inputs with aliases properly ([#26774](https://github.com/angular/angular/issues/26774)) ([19fcfc3](https://github.com/angular/angular/commit/19fcfc3))
* **compiler:** generate relative paths only in summary file errors ([#26759](https://github.com/angular/angular/issues/26759)) ([56f44be](https://github.com/angular/angular/commit/56f44be))
* **core:** ignore comment nodes under unsafe elements ([#25879](https://github.com/angular/angular/issues/25879)) ([d5cbcef](https://github.com/angular/angular/commit/d5cbcef))
* **core:** Remove static dependency from [@angular](https://github.com/angular)/core to [@angular](https://github.com/angular)/compiler ([#26734](https://github.com/angular/angular/issues/26734)) ([d042c4a](https://github.com/angular/angular/commit/d042c4a))
* **core:** support computed base class in metadata inheritance ([#24014](https://github.com/angular/angular/issues/24014)) ([95743e3](https://github.com/angular/angular/commit/95743e3))
* **compiler:** generate relative paths only in summary file errors ([#26759](https://github.com/angular/angular/issues/26759)) ([c01f340](https://github.com/angular/angular/commit/c01f340))
* **core:** Remove static dependency from [@angular](https://github.com/angular)/core to [@angular](https://github.com/angular)/compiler ([#26734](https://github.com/angular/angular/issues/26734)) ([#26879](https://github.com/angular/angular/issues/26879)) ([257ac83](https://github.com/angular/angular/commit/257ac83))
* **core:** support computed base class in metadata inheritance ([#24014](https://github.com/angular/angular/issues/24014)) ([b3c6409](https://github.com/angular/angular/commit/b3c6409))
* **core:** allow null value for renderer setElement(…) ([#17065](https://github.com/angular/angular/issues/17065)) ([ff15043](https://github.com/angular/angular/commit/ff15043)), closes [#13686](https://github.com/angular/angular/issues/13686)
* **router:** fix regression where navigateByUrl promise didn't resolve on CanLoad failure ([#26455](https://github.com/angular/angular/issues/26455)) ([1c9b065](https://github.com/angular/angular/commit/1c9b065)), closes [#26284](https://github.com/angular/angular/issues/26284)
* **service-worker:** clean up caches from old SW versions ([#26319](https://github.com/angular/angular/issues/26319)) ([2326b9c](https://github.com/angular/angular/commit/2326b9c))
* **upgrade:** properly destroy upgraded component elements and descendants ([#26209](https://github.com/angular/angular/issues/26209)) ([071934e](https://github.com/angular/angular/commit/071934e)), closes [#26208](https://github.com/angular/angular/issues/26208)
### Features
* **router:** add prioritizedGuardValue operator optimization and allowing UrlTree return from guard ([#26478](https://github.com/angular/angular/issues/26478)) ([fdfedce](https://github.com/angular/angular/commit/fdfedce))
To learn about the release highlights and our new CLI-powered update workflow for your projects please check out the [v7 release announcement](https://blog.angular.io/version-7-of-angular-cli-prompts-virtual-scroll-drag-and-drop-and-more-c594e22e7b8c).
### Dependency updates
*@angular/core now depends on
* TypeScript 3.1
* RxJS 6.3
*@angular/platform-server now depends on Domino 2.1
* **compiler:** add "original" placeholder value on extracted XMB ([#25079](https://github.com/angular/angular/issues/25079)) ([e99d860](https://github.com/angular/angular/commit/e99d860))
* **compiler-cli:** add support to extend `angularCompilerOptions` ([#22717](https://github.com/angular/angular/issues/22717)) ([d7e5bbf](https://github.com/angular/angular/commit/d7e5bbf)), closes [#22684](https://github.com/angular/angular/issues/22684)
* **bazel:** add additional parameters to `ts_api_guardian_test` def ([#25694](https://github.com/angular/angular/issues/25694)) ([2a21ca0](https://github.com/angular/angular/commit/2a21ca0))
* **elements:** enable Shadow DOM v1 and slots ([#24861](https://github.com/angular/angular/issues/24861)) ([c9844a2](https://github.com/angular/angular/commit/c9844a2))
* **platform-server:** update domino to v2.1.0 ([#25564](https://github.com/angular/angular/issues/25564)) ([3fb0da2](https://github.com/angular/angular/commit/3fb0da2))
* **router:** warn if navigation triggered outside Angular zone ([#24959](https://github.com/angular/angular/issues/24959)) ([010e35d](https://github.com/angular/angular/commit/010e35d)), closes [#15770](https://github.com/angular/angular/issues/15770) [#15946](https://github.com/angular/angular/issues/15946) [#24728](https://github.com/angular/angular/issues/24728)
* add mappings for ngfactory & ngsummary files to their module names in aot summary resolver ([#25335](https://github.com/angular/angular/issues/25335)) ([02e201a](https://github.com/angular/angular/commit/02e201a))
* **bazel:** allow compile_strategy to be (privately) imported ([#25080](https://github.com/angular/angular/issues/25080)) ([0d1d589](https://github.com/angular/angular/commit/0d1d589))
* **bazel:** correct type concatenated to devmode_js ([#25467](https://github.com/angular/angular/issues/25467)) ([fb2c524](https://github.com/angular/angular/commit/fb2c524))
* **bazel:** only lookup amd module-name tags in .d.ts files ([#25710](https://github.com/angular/angular/issues/25710)) ([42072c4](https://github.com/angular/angular/commit/42072c4))
* **bazel:** protractor rule should include *.e2e-spec.js ([#25701](https://github.com/angular/angular/issues/25701)) ([3809e0f](https://github.com/angular/angular/commit/3809e0f))
* **bazel:** specify the package and lock files using the workspace ([#25694](https://github.com/angular/angular/issues/25694)) ([ddc1335](https://github.com/angular/angular/commit/ddc1335))
* **benchpress:** Use performance.mark() instead of console.time() ([#24114](https://github.com/angular/angular/issues/24114)) ([06d0400](https://github.com/angular/angular/commit/06d0400))
* **common:** register locale data for all equivalent closure locales ([#25867](https://github.com/angular/angular/issues/25867)) ([d83f9d4](https://github.com/angular/angular/commit/d83f9d4))
* **compiler-cli:** correct realPath to realpath. ([#25023](https://github.com/angular/angular/issues/25023)) ([01e6dab](https://github.com/angular/angular/commit/01e6dab))
* **compiler-cli:** use the oldProgram option in watch mode ([#21364](https://github.com/angular/angular/issues/21364)) ([c6e5b97](https://github.com/angular/angular/commit/c6e5b97)), closes [#21361](https://github.com/angular/angular/issues/21361)
* **compiler:** Fix look up of entryComponents in AOT Summaries ([#24892](https://github.com/angular/angular/issues/24892)) ([00d3666](https://github.com/angular/angular/commit/00d3666))
* **compiler:** add hostVars and support pure functions in host bindings ([#25626](https://github.com/angular/angular/issues/25626)) ([b424b31](https://github.com/angular/angular/commit/b424b31))
* **core:** allow null value for renderer setElement(…) ([#17065](https://github.com/angular/angular/issues/17065)) ([ff15043](https://github.com/angular/angular/commit/ff15043)), closes [#13686](https://github.com/angular/angular/issues/13686)
* **core:** do not clear element content when using shadow dom ([#24861](https://github.com/angular/angular/issues/24861)) ([6e828bb](https://github.com/angular/angular/commit/6e828bb))
* **core:** size regression with closure compiler ([#25531](https://github.com/angular/angular/issues/25531)) ([1f59f2f](https://github.com/angular/angular/commit/1f59f2f))
* **core:** throw error message when @Output not initialized ([#19116](https://github.com/angular/angular/issues/19116)) ([adf510f](https://github.com/angular/angular/commit/adf510f)), closes [#3664](https://github.com/angular/angular/issues/3664)
* **router:** fix regression where navigateByUrl promise didn't resolve on CanLoad failure ([#26455](https://github.com/angular/angular/issues/26455)) ([1c9b065](https://github.com/angular/angular/commit/1c9b065)), closes [#26284](https://github.com/angular/angular/issues/26284)
* **router:** mount correct component if router outlet was not instantiated and if using a route reuse strategy ([#25313](https://github.com/angular/angular/issues/25313)) ([#25314](https://github.com/angular/angular/issues/25314)) ([8dc2b11](https://github.com/angular/angular/commit/8dc2b11))
* **router:** take base uri into account in `setUpLocationSync()` ([#20244](https://github.com/angular/angular/issues/20244)) ([ba1e25f](https://github.com/angular/angular/commit/ba1e25f)), closes [#20061](https://github.com/angular/angular/issues/20061)
* **service-worker:** clean up caches from old SW versions ([#26319](https://github.com/angular/angular/issues/26319)) ([00b5c7b](https://github.com/angular/angular/commit/00b5c7b))
* **service-worker:** do not blow up when caches are unwritable ([#26042](https://github.com/angular/angular/issues/26042)) ([2bd767c](https://github.com/angular/angular/commit/2bd767c))
* **upgrade:** properly destroy upgraded component elements and descendants ([#26209](https://github.com/angular/angular/issues/26209)) ([071934e](https://github.com/angular/angular/commit/071934e)), closes [#26208](https://github.com/angular/angular/issues/26208)
* **upgrade:** trigger `$destroy` event on upgraded component element ([#25357](https://github.com/angular/angular/issues/25357)) ([2a672a9](https://github.com/angular/angular/commit/2a672a9)), closes [#25334](https://github.com/angular/angular/issues/25334)
@ -17,95 +375,11 @@ This version includes Ivy features and internal refactorings. There are no user-
* add support for TypeScript 3.1 ([#26151](https://github.com/angular/angular/issues/26151)) ([9993c72](https://github.com/angular/angular/commit/9993c72))
* **service-worker:** do not blow up when caches are unwritable ([#26042](https://github.com/angular/angular/issues/26042)) ([2bd767c](https://github.com/angular/angular/commit/2bd767c))
### Features
* **compiler-cli:** add support to extend `angularCompilerOptions` ([#22717](https://github.com/angular/angular/issues/22717)) ([d7e5bbf](https://github.com/angular/angular/commit/d7e5bbf)), closes [#22684](https://github.com/angular/angular/issues/22684)
* **platform-server:** update domino to v2.1.0 ([#25564](https://github.com/angular/angular/issues/25564)) ([3fb0da2](https://github.com/angular/angular/commit/3fb0da2))
* **service-worker:** do not blow up when caches are unwritable ([#26042](https://github.com/angular/angular/issues/26042)) ([a169743](https://github.com/angular/angular/commit/a169743))
* **bazel:** specify the package and lock files using the workspace ([#25694](https://github.com/angular/angular/issues/25694)) ([ddc1335](https://github.com/angular/angular/commit/ddc1335))
* **common:** register locale data for all equivalent closure locales ([#25867](https://github.com/angular/angular/issues/25867)) ([d83f9d4](https://github.com/angular/angular/commit/d83f9d4))
* **compiler:** Fix look up of entryComponents in AOT Summaries ([#24892](https://github.com/angular/angular/issues/24892)) ([00d3666](https://github.com/angular/angular/commit/00d3666))
* **ivy:** add [@nocollapse](https://github.com/nocollapse) when writing closure-annotated code ([#25775](https://github.com/angular/angular/issues/25775)) ([a0c4b2d](https://github.com/angular/angular/commit/a0c4b2d))
* **ivy:** events should not mark views dirty by default ([#25969](https://github.com/angular/angular/issues/25969)) ([5653874](https://github.com/angular/angular/commit/5653874))
* **ivy:** ngcc should compile entry-points in the correct order ([#25862](https://github.com/angular/angular/issues/25862)) ([9b1bb37](https://github.com/angular/angular/commit/9b1bb37))
* **ivy:** use proper sanitizer names ([#25817](https://github.com/angular/angular/issues/25817)) ([21009b0](https://github.com/angular/angular/commit/21009b0)), closes [#25816](https://github.com/angular/angular/issues/25816)
* **router:** mount correct component if router outlet was not instantiated and if using a route reuse strategy ([#25313](https://github.com/angular/angular/issues/25313)) ([#25314](https://github.com/angular/angular/issues/25314)) ([8dc2b11](https://github.com/angular/angular/commit/8dc2b11))
### Features
* **bazel:** add additional parameters to `ts_api_guardian_test` def ([#25694](https://github.com/angular/angular/issues/25694)) ([2a21ca0](https://github.com/angular/angular/commit/2a21ca0))
* **ivy:** allow combined context discovery for components, directives and elements ([#25754](https://github.com/angular/angular/issues/25754)) ([62be8c2](https://github.com/angular/angular/commit/62be8c2))
* **ivy:** patch animations into metadata ([#25828](https://github.com/angular/angular/issues/25828)) ([d2dfd48](https://github.com/angular/angular/commit/d2dfd48))
* **ivy:** resolve references to vars in .d.ts files ([#25775](https://github.com/angular/angular/issues/25775)) ([96d6b79](https://github.com/angular/angular/commit/96d6b79))
* **ivy:** support animation [@triggers](https://github.com/triggers) in templates ([#25849](https://github.com/angular/angular/issues/25849)) ([e363388](https://github.com/angular/angular/commit/e363388))
* **ivy:** support bootstrap in ngModuleDef ([#25775](https://github.com/angular/angular/issues/25775)) ([13ccdfd](https://github.com/angular/angular/commit/13ccdfd))
* **bazel:** protractor rule should include *.e2e-spec.js ([#25701](https://github.com/angular/angular/issues/25701)) ([3809e0f](https://github.com/angular/angular/commit/3809e0f))
* **benchpress:** Use performance.mark() instead of console.time() ([#24114](https://github.com/angular/angular/issues/24114)) ([06d0400](https://github.com/angular/angular/commit/06d0400))
* **compiler:** add hostVars and support pure functions in host bindings ([#25626](https://github.com/angular/angular/issues/25626)) ([b424b31](https://github.com/angular/angular/commit/b424b31))
* **core:** do not clear element content when using shadow dom ([#24861](https://github.com/angular/angular/issues/24861)) ([6e828bb](https://github.com/angular/angular/commit/6e828bb))
* **core:** size regression with closure compiler ([#25531](https://github.com/angular/angular/issues/25531)) ([1f59f2f](https://github.com/angular/angular/commit/1f59f2f))
* **upgrade:** trigger `$destroy` event on upgraded component element ([#25357](https://github.com/angular/angular/issues/25357)) ([2a672a9](https://github.com/angular/angular/commit/2a672a9)), closes [#25334](https://github.com/angular/angular/issues/25334)
### Features
* **elements:** enable Shadow DOM v1 and slots ([#24861](https://github.com/angular/angular/issues/24861)) ([c9844a2](https://github.com/angular/angular/commit/c9844a2))
* **router:** warn if navigation triggered outside Angular zone ([#24959](https://github.com/angular/angular/issues/24959)) ([010e35d](https://github.com/angular/angular/commit/010e35d)), closes [#15770](https://github.com/angular/angular/issues/15770) [#15946](https://github.com/angular/angular/issues/15946) [#24728](https://github.com/angular/angular/issues/24728)
<aname="6.1.7"></a>
@ -121,18 +395,6 @@ This version includes Ivy features and internal refactorings. There are no user-
* **router:** warn if navigation triggered outside Angular zone ([#24959](https://github.com/angular/angular/issues/24959)) ([23a96dc](https://github.com/angular/angular/commit/23a96dc)), closes [#15770](https://github.com/angular/angular/issues/15770) [#15946](https://github.com/angular/angular/issues/15946) [#24728](https://github.com/angular/angular/issues/24728)
* **bazel:** correct type concatenated to devmode_js ([#25467](https://github.com/angular/angular/issues/25467)) ([fb2c524](https://github.com/angular/angular/commit/fb2c524))
* **compiler-cli:** use the oldProgram option in watch mode ([#21364](https://github.com/angular/angular/issues/21364)) ([c6e5b97](https://github.com/angular/angular/commit/c6e5b97)), closes [#21361](https://github.com/angular/angular/issues/21361)
* **core:** In Testability.whenStable update callback, pass more complete ([#25010](https://github.com/angular/angular/issues/25010)) ([16c03c0](https://github.com/angular/angular/commit/16c03c0))
* add mappings for ngfactory & ngsummary files to their module names in aot summary resolver ([#25335](https://github.com/angular/angular/issues/25335)) ([02e201a](https://github.com/angular/angular/commit/02e201a))
* **router:** take base uri into account in `setUpLocationSync()` ([#20244](https://github.com/angular/angular/issues/20244)) ([ba1e25f](https://github.com/angular/angular/commit/ba1e25f)), closes [#20061](https://github.com/angular/angular/issues/20061)
@ -213,22 +440,6 @@ Note: the 6.1.5 release on npm accidentally glitched-out midway, so we cut 6.1.6
* add mappings for ngfactory & ngsummary files to their module names in aot summary resolver ([#25335](https://github.com/angular/angular/issues/25335)) ([054fbbe](https://github.com/angular/angular/commit/054fbbe))
* **bazel:** allow compile_strategy to be (privately) imported ([#25080](https://github.com/angular/angular/issues/25080)) ([0d1d589](https://github.com/angular/angular/commit/0d1d589))
@ -51,19 +51,15 @@ and help you to craft the change so that it is successfully accepted into the pr
Before you submit an issue, please search the issue tracker, maybe an issue for your problem already exists and the discussion might inform you of workarounds readily available.
We want to fix all the issues as soon as possible, but before fixing a bug we need to reproduce and confirm it. In order to reproduce bugs, we will systematically ask you to provide a minimal reproduction scenario using http://plnkr.co. Having a live, reproducible scenario gives us a wealth of important information without going back & forth to you with additional questions like:
We want to fix all the issues as soon as possible, but before fixing a bug we need to reproduce and confirm it. In order to reproduce bugs, we will systematically ask you to provide a minimal reproduction. Having a minimal reproducible scenario gives us a wealth of important information without going back & forth to you with additional questions.
- version of Angular used
- 3rd-party libraries and their versions
- and most importantly - a use-case that fails
A minimal reproduction allows us to quickly confirm a bug (or point out a coding problem) as well as confirm that we are fixing the right problem.
A minimal reproduce scenario using http://plnkr.co/ allows us to quickly confirm a bug (or point out coding problem) as well as confirm that we are fixing the right problem. If plunker is not a suitable way to demonstrate the problem (for example for issues related to our npm packaging), please create a standalone git repository demonstrating the problem.
We will be insisting on a minimal reproduce scenario in order to save maintainers time and ultimately be able to fix more bugs. Interestingly, from our experience users often find coding problems themselves while preparing a minimal plunk. We understand that sometimes it might be hard to extract essentials bits of code from a larger code-base but we really need to isolate the problem before we can fix it.
We will be insisting on a minimal reproduction scenario in order to save maintainers time and ultimately be able to fix more bugs. Interestingly, from our experience users often find coding problems themselves while preparing a minimal reproduction. We understand that sometimes it might be hard to extract essential bits of code from a larger code-base but we really need to isolate the problem before we can fix it.
Unfortunately, we are not able to investigate / fix bugs without a minimal reproduction, so if we don't hear back from you we are going to close an issue that doesn't have enough info to be reproduced.
You can file new issues by filling out our [new issue form](https://github.com/angular/angular/issues/new).
You can file new issues by selecting from our [new issue templates](https://github.com/angular/angular/issues/new/choose) and filling out the issue template.
### <a name="submit-pr"></a> Submitting a Pull Request (PR)
@ -195,7 +191,7 @@ If the commit reverts a previous commit, it should begin with `revert: `, follow
Must be one of the following:
* **build**: Changes that affect the build system or external dependencies (example scopes: gulp, broccoli, npm)
* **ci**: Changes to our CI configuration files and scripts (example scopes: Travis, Circle, BrowserStack, SauceLabs)
* **ci**: Changes to our CI configuration files and scripts (example scopes: Circle, BrowserStack, SauceLabs)
[](https://gitter.im/angular/angular?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
@ -13,12 +12,10 @@ Angular is a development platform for building mobile and desktop web applicatio
[Get started in 5 minutes][quickstart].
## Changelog
[Learn about the latest improvements][changelog].
## Want to help?
Want to file a bug, contribute some code, or improve documentation? Excellent! Read up on our
@ -41,8 +41,6 @@ Here are the most important tasks you might need to use:
-`yarn example-e2e --filter=foo` - limit e2e tests to those containing the word "foo"
-`yarn example-e2e --setup --local` - run e2e tests with the local version of Angular contained in the "dist" folder
*`yarn build-ie-polyfills` - generates a js file of polyfills that can be loaded in Internet Explorer.
## Developing on Windows
The `packages/` directory may contain Linux-specific symlinks, which are not recognized by Windows.
These unresolved links cause the docs generation process to fail because it cannot locate certain files.
@ -50,7 +48,7 @@ These unresolved links cause the docs generation process to fail because it cann
> Hint: The following steps require administration rights or [Windows Developer Mode](https://docs.microsoft.com/en-us/windows/uwp/get-started/enable-your-device-for-development) enabled!
To fix this problem, run `scripts/windows/create-symlinks.sh`. This command creates temporary files where the symlinks used to be. Make sure not to commit those files with your documentation changes.
When you are done making and testing your documentation changes, you can restore the original symlinks and delete the temporary files by running `scripts/windows/remove-symlinks.sh`.
When you are done making and testing your documentation changes, you can restore the original symlinks and delete the temporary files by running `scripts/windows/remove-symlinks.sh`.
It's necessary to remove the temporary files, because otherwise they're displayed as local changes in your git working copy and certain operations are blocked.
The Angular CLI is a command-line tool that you use to initialize, develop, scaffold, and maintain Angular applications.
The Angular CLI is a command-line interface tool that you use to initialize, develop, scaffold, and maintain Angular applications. You can use the tool directly in a command shell, or indirectly through an interactive UI such as [Angular Console](https://angularconsole.com).
## Getting Started
## Installing Angular CLI
### Installing Angular CLI
Major versions of Angular CLI follow the supported major version of Angular, but minor versions can be released separately.
The current version of Angular CLI is 6.x.
Install the CLI using the `npm` package manager:
<code-exampleformat="."language="bash">
npm install -g @angular/cli
</code-example>
* Both the CLI and the projects that you generate with the tool have dependencies that require Node 8.9 or higher, together with NPM 5.5.1 or higher.
For details about changes between versions, and information about updating from previous releases,
see the Releases tab on GitHub: https://github.com/angular/angular-cli/releases
For details about changes between versions, and information about updating from previous releases, see the Releases tab on GitHub.
## Basic workflow
### Basic workflow
Invoke the tool on the command line through the `ng` executable.
Online help is available on the command line.
Enter the following to list commands or options for a given command (such as [generate](cli/generate)) with a short description.
Invoke the tool on the command line through the ng executable. Online help is available on the command line:
<code-exampleformat="."language="bash">
ng help
ng generate --help
</code-example>
```
> ng help Lists commands with short descriptions
> ng <command> --help Lists options for a command.
```
To create, build, and serve a new, basic Angular project on a development server, go to the parent directory of your new workspace use the following commands:
To create, build, and serve a new, basic Angular project on a development server, use the following commands:
```
cd <parent of new workspace>
ng new my-project
cd my-project
<code-exampleformat="."language="bash">
ng new my-first-project
cd my-first-project
ng serve
```
</code-example>
In your browser, open http://localhost:4200/ to see the new app run.
When you use the [ng serve](cli/serve) command to build an app and serve it locally, the server automatically rebuilds the app and reloads the page when you change any of the source files.
### Workspaces and project files
## Workspaces and project files
Angular 6 introduced the workspace directory structure for Angular apps. A workspace defines a project. A project can contain multiple apps, as well as libraries that can be used in any of the apps.
The [ng new](cli/new) command creates an *Angular workspace* folder and generates a new app skeleton.
A workspace can contain multiple apps and libraries.
The initial app created by the [ng new](cli/new) command is at the top level of the workspace.
When you generate an additional app or library in a workspace, it goes into a `projects/` subfolder.
Some commands (such as build) must be executed from within a workspace folder, and others (such as new) must be executed from outside any workspace. This requirement is called out in the description of each command where it applies.The `new` command creates a [workspace](guide/glossary#workspace) to contain [projects](guide/glossary#project). A project can be an app or a library, and a workspace can contain multiple apps and libraries.
A newly generated app contains the source files for a root module, with a root component and template.
Each app has a `src` folder that contains the logic, data, and assets.
A newly generated app project contains the source files for a root module, with a root component and template, which you can edit directly, or add to and modify using CLI commands. Use the generate command to add new files for additional components and services, and code for new pipes, directives, and so on.
You can edit the generated files directly, or add to and modify them using CLI commands.
Use the [ng generate](cli/generate) command to add new files for additional components and services, and code for new pipes, directives, and so on.
Commands such as [add](cli/add) and [generate](cli/generate), which create or operate on apps and libraries, must be executed from within a workspace or project folder.
*Commands such as `add` and `generate`, that create or operate on apps and libraries, must be executed from within a workspace folder.
* Apps in a workspace can use libraries in the same workspace.
* Each project has a `src` folder that contains the logic, data, and assets.
See an example of the [file structure](guide/quickstart#project-file-review) in [Getting Started](guide/quickstart).
*See more about the [Workspace file structure](guide/file-structure).
When you use the `serve` command to build an app, the server automatically rebuilds the app and reloads the page when you change any of the source files.
### Workspace and project configuration
### Configuring the CLI
A single workspace configuration file, `angular.json`, is created at the top level of the workspace.
This is where you can set per-project defaults for CLI command options, and specify configurations to use when the CLI builds a project for different targets.
Configurationfiles let you customize your project. The CLI configuration file, angular.json, is created at the top level of the project folder. This is where you can set CLI defaults for your project, and specify which files to include when the CLI builds the project.
The [ng config](cli/config) command lets you set and retrieve configuration values from the command line, or you can edit the `angular.json` file directly.
Note that option names in the configuration file must use [camelCase](guide/glossary#case-types), while option names supplied to commands can use either camelCase or dash-case.
The CLI config command lets you set and retrieve configuration values from the command line, or you can edit the angular.jsonfile directly.
* See more about [Workspace Configuration](guide/workspace-config).
* See the [complete schema](https://github.com/angular/angular-cli/wiki/angular-workspace) for `angular.json`.
* See the complete schema for angular.json.
* Learn more about configuration options for Angular (link to new guide?)
### Command options and arguments
All commands and some options have aliases, as listed in the descriptions. Option names are prefixed with a double dash (--), but arguments and option aliases are not.
Typically, the name of a generated artifact can be given as an argument to the command or specified with the --name option. Most commands have additional options.
Options take either string or Boolean arguments. Defaults are shown in bold for Boolean or enumerated values, and are given with the description. For example:
* Most commands, and some options, have aliases. Aliases are shown in the syntax statement for each command.
* Option names are prefixed with a double dash (--).
Option aliases are prefixed with a single dash (-).
Arguments are not prefixed.
For example:
<code-exampleformat="."language="bash">
ng build my-app -c production
</code-example>
Boolean options can also be expressed with a prefix `no-` to indicate a value of false. For example, `--no-prod` is equivalent to `--prod=false`.
* Typically, the name of a generated artifact can be given as an argument to the command or specified with the --name option.
* Argument and option names can be given in either
[camelCase or dash-case](guide/glossary#case-types).
`--myOptionName` is equivalent to `--my-option-name`.
### Boolean and enumerated options
Boolean options have two forms: `--thisOption` sets the flag, `--noThisOption` clears it.
If neither option is supplied, the flag remains in its default state, as listed in the reference documentation.
Allowed values are given with each enumerated option description, with the default value in **bold**.
### Relative paths
Options that specify files can be given as absolute paths, or as paths relative to the current working directory, which is generally either the workspace or project root.
### Schematics
The [ng generate](cli/generate) and [ng add](cli/add) commands take as an argument the artifact or library to be generated or added to the current project.
In addition to any general options, each artifact or library defines its own options in a *schematic*.
Schematic options are supplied to the command in the same format as immediate command options.
@ -61,7 +61,7 @@ If you plan to use specific animation functions in component files, import those
In the component file, add a metadata property called `animations:` within the `@Component()` decorator. You put the trigger that defines an animation within the `animations` metadata property.
@ -82,12 +82,12 @@ Use the `style()` function to define a set of styles to associate with a given s
Let's see how Angular's `state()` function works with the `style()` function to set CSS style attributes. In this code snippet, multiple style attributes are set at the same time for the state. In the `open` state, the button has a height of 200 pixels, an opacity of 1, and a background color of yellow.
@ -180,7 +180,7 @@ In this example, we'll name the trigger `openClose`, and attach it to the `butto
Animations are defined in the metadata of the component that controls the HTML element to be animated. Put the code that defines your animations under the `animations:` property within the `@Component()` decorator.
@ -8,7 +8,7 @@ This guide explains how to specify metadata and apply available compiler options
<divclass="alert is-helpful"
<ahref="https://www.youtube.com/watch?v=kW9cJsvcsGo">Watch compiler author Tobias Bosch explain the Angular Compiler</a> at AngularConnect 2016.
<ahref="https://www.youtube.com/watch?v=kW9cJsvcsGo">Watch compiler author Tobias Bosch explain the Angular compiler</a> at AngularConnect 2016.
</div>
@ -21,7 +21,7 @@ Angular offers two ways to compile your application:
1.**_Just-in-Time_ (JIT)**, which compiles your app in the browser at runtime.
1.**_Ahead-of-Time_ (AOT)**, which compiles your app at build time.
JIT compilation is the default when you run the _build-only_ or the _build-and-serve-locally_ CLI commands:
JIT compilation is the default when you run the [`ng build`](cli/build) (buildonly) or [`ng serve`](cli/serve) (buildandservelocally) CLI commands:
<code-examplelanguage="sh"class="code-shell">
ng build
@ -30,7 +30,7 @@ JIT compilation is the default when you run the _build-only_ or the _build-and-s
{@a compile}
For AOT compilation, append the `--aot`flags to the _build-only_ or the _build-and-serve-locally_ CLI commands:
For AOT compilation, include the `--aot`option with the `ng build` or `ng serve` command:
<code-examplelanguage="sh"class="code-shell">
ng build --aot
@ -41,7 +41,7 @@ For AOT compilation, append the `--aot` flags to the _build-only_ or the _build-
The `ng build` command with the `--prod` meta-flag (`ng build --prod`) compiles with AOT by default.
See the [CLI documentation](https://github.com/angular/angular-cli/wiki) for details, especially the [`build` topic](https://github.com/angular/angular-cli/wiki/build).
See the [CLI command reference](cli) and [Building and serving Angular apps](guide/build) for more information.
@ -15,7 +15,7 @@ Its `selectHero()` method sets a `selectedHero` property when the user clicks to
The component acquires the heroes from a service, which is a TypeScript [parameter property](http://www.typescriptlang.org/docs/handbook/classes.html#parameter-properties) on the constructor.
The service is provided to the component through the dependency injection system.
Angular creates, updates, and destroys components as the user moves through the application. Your app can take action at each moment in this lifecycle through optional [lifecycle hooks](guide/lifecycle-hooks), like `ngOnInit()`.
@ -31,7 +31,7 @@ In addition to containing or pointing to the template, the `@Component` metadata
Here's an example of basic metadata for `HeroListComponent`.
This template uses typical HTML elements like `<h2>` and `<p>`, and also includes Angular template-syntax elements, `*ngFor`, `{{hero.name}}`, `(click)`, `[hero]`, and `<app-hero-detail>`. The template-syntax elements tell Angular how to render the HTML to the screen, using program logic and data.
@ -87,7 +87,7 @@ The following diagram shows the four forms of data binding markup. Each form has
This example from the `HeroListComponent` template uses three of these forms.
* [`*ngFor`](guide/displaying-data#ngFor) is an iterative; it tells Angular to stamp out one `<li>` per hero in the `heroes` list.
* [`*ngIf`](guide/displaying-data#ngIf) is a conditional; it includes the `HeroDetail` component only if a selected hero exists.
@ -176,7 +176,7 @@ In templates they look like regular HTML attributes, hence the name.
The `ngModel` directive, which implements two-way data binding, is an example of an attribute directive. `ngModel` modifies the behavior of an existing element (typically `<input>`) by setting its display value property and responding to change events.
@ -56,7 +56,9 @@ A component and its template together define a *view*. A component can contain a
When you create a component, it's associated directly with a single view, called the *host view*. The host view can be the root of a view hierarchy, which can contain *embedded views*, which are in turn the host views of other components. Those components can be in the same NgModule, or can be imported from other NgModules. Views in the tree can be nested to any depth.
<divclass="alert is-helpful">
**Note:** The hierarchical structure of views is a key factor in the way Angular detects and responds to changes in the DOM and app data.
**Note:** The hierarchical structure of views is a key factor in the way Angular detects and responds to changes in the DOM and app data.
</div>
## NgModules and JavaScript modules
@ -79,7 +81,7 @@ Other JavaScript modules use *import statements* to access public objects from o
Angular loads as a collection of JavaScript modules. You can think of them as library modules. Each Angular library name begins with the `@angular` prefix. Install them with the `npm` package manager and import parts of them with JavaScript `import` statements.
Angular loads as a collection of JavaScript modules. You can think of them as library modules. Each Angular library name begins with the `@angular` prefix. Install them with the node package manager`npm` and import parts of them with JavaScript `import` statements.
<brclass="clear">
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
